Search Results

Search found 5121 results on 205 pages for 'dll'.

Page 188/205 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Windows 7 losing one of my displays after restart

  - by j_kubik

  I have an Intel DZ68BC motherboard with Intel HD graphics card using two monitors (on DVI and on HDMI » VGA). My friend asked me to test if his NVIDIA graphics card works well on my computer (at his it was doing some trouble), so I inserted it in my computer, installed the NVIDIA driver and it worked quite well. Then I removed it, uninstalled everything NVIDIA-related I could find and switched monitors back to my Intel card. Since then after every system start/restart, the system sees only monitor on HDMI » VGA connector, completely ignoring the DVI monitor. I noticed that installing the Intel video drivers causes the system to recognize the second monitor if I don't immediately reboot. After a reboot, the system recognizes only the HDMI » VGA monitor. I also tried starting in safe-mode and using DriveSweeper to remove the remains of NVIDIA drivers. While it seems that some drivers were removed, the situation didn't change. Now I am out of ideas and I really wouldn't like to reinstall the system (again...). I also tried restoring the system to the state before this whole story, but it also didn't change anything. EDIT: I am still trying to troubleshoot this problem. The only point that I could start was driver re-instalation. I traced down the part that restores right settings to a call: C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\x64\Drv64.exe -driverinf "C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\Graphics\igdlh64.inf" -flags 20 -keypath "Software\Intel\Difx64" This call fixes my displays, and as workaround, I will add it for now to my autorun. I am still looking for better solution anyway... EDIT2: Using DriverView i made a list of currently used drivers both before and after fixing my display using above command. Then i compared logs: No drivers were removed by fixing command. Drivers added by fixing command: MS Remote Access serial network driver (asyncmac.sys) security processor (spsys.sys) Drivers that changed base address (indicates driver-reload?) Canonical Display Driver (cdd.dll) Intel Graphics Kernel Mode Driver (igdkmd64.sys) Monitor Driver (monitor.sys) Added drivers seem rather unrelated to the problem to me, reloaded drivers are just a cnsequence of installing new driver file so there is not much to go here... I really cannot make heads or tails out of it...

  Read the article

• C# 5 Async, Part 1: Simplifying Asynchrony – That for which we await

  - by Reed

  Today’s announcement at PDC of the future directions C# is taking excite me greatly.  The new Visual Studio Async CTP is amazing.  Asynchronous code – code which frustrates and demoralizes even the most advanced of developers, is taking a huge leap forward in terms of usability.  This is handled by building on the Task functionality in .NET 4, as well as the addition of two new keywords being added to the C# language: async and await. This core of the new asynchronous functionality is built upon three key features.  First is the Task functionality in .NET 4, and based on Task and Task<TResult>.  While Task was intended to be the primary means of asynchronous programming with .NET 4, the .NET Framework was still based mainly on the Asynchronous Pattern and the Event-based Asynchronous Pattern. The .NET Framework added functionality and guidance for wrapping existing APIs into a Task based API, but the framework itself didn’t really adopt Task or Task<TResult> in any meaningful way.  The CTP shows that, going forward, this is changing. One of the three key new features coming in C# is actually a .NET Framework feature.  Nearly every asynchronous API in the .NET Framework has been wrapped into a new, Task-based method calls.  In the CTP, this is done via as external assembly (AsyncCtpLibrary.dll) which uses Extension Methods to wrap the existing APIs.  However, going forward, this will be handled directly within the Framework.  This will have a unifying effect throughout the .NET Framework.  This is the first building block of the new features for asynchronous programming: Going forward, all asynchronous operations will work via a method that returns Task or Task<TResult> The second key feature is the new async contextual keyword being added to the language.  The async keyword is used to declare an asynchronous function, which is a method that either returns void, a Task, or a Task<T>. Inside the asynchronous function, there must be at least one await expression.  This is a new C# keyword (await) that is used to automatically take a series of statements and break it up to potentially use discontinuous evaluation.  This is done by using await on any expression that evaluates to a Task or Task<T>. For example, suppose we want to download a webpage as a string.  There is a new method added to WebClient: Task<string> WebClient.DownloadStringTaskAsync(Uri).  Since this returns a Task<string> we can use it within an asynchronous function.  Suppose, for example, that we wanted to do something similar to my asynchronous Task example – download a web page asynchronously and check to see if it supports XHTML 1.0, then report this into a TextBox.  This could be done like so: private async void button1_Click(object sender, RoutedEventArgs e) { string url = "http://reedcopsey.com"; string content = await new WebClient().DownloadStringTaskAsync(url); this.textBox1.Text = string.Format("Page {0} supports XHTML 1.0: {1}", url, content.Contains("XHTML 1.0")); } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Let’s walk through what’s happening here, step by step.  By adding the async contextual keyword to the method definition, we are able to use the await keyword on our WebClient.DownloadStringTaskAsync method call. When the user clicks this button, the new method (Task<string> WebClient.DownloadStringTaskAsync(string)) is called, which returns a Task<string>.  By adding the await keyword, the runtime will call this method that returns Task<string>, and execution will return to the caller at this point.  This means that our UI is not blocked while the webpage is downloaded.  Instead, the UI thread will “await” at this point, and let the WebClient do it’s thing asynchronously. When the WebClient finishes downloading the string, the user interface’s synchronization context will automatically be used to “pick up” where it left off, and the Task<string> returned from DownloadStringTaskAsync is automatically unwrapped and set into the content variable.  At this point, we can use that and set our text box content. There are a couple of key points here: Asynchronous functions are declared with the async keyword, and contain one or more await expressions In addition to the obvious benefits of shorter, simpler code – there are some subtle but tremendous benefits in this approach.  When the execution of this asynchronous function continues after the first await statement, the initial synchronization context is used to continue the execution of this function.  That means that we don’t have to explicitly marshal the call that sets textbox1.Text back to the UI thread – it’s handled automatically by the language and framework!  Exception handling around asynchronous method calls also just works. I’d recommend every C# developer take a look at the documentation on the new Asynchronous Programming for C# and Visual Basic page, download the Visual Studio Async CTP, and try it out.

  Read the article

• Chester Devs Presentation and source code &ndash; &lsquo;Event Store - an introduction to a DSD for event sourcing and notifications&rsquo;

  - by Liam Westley

  Originally posted on: http://geekswithblogs.net/twickers/archive/2013/11/11/chester-devs-presentation-and-source-code-ndash-lsquoevent-store.aspxThank you everyone at Chester Devs Thanks to Fran Hoey and all the people from Chester Devs. It was a hard drive up and back but the enthusiasm of the audience, with some great questions does make it worthwhile. Presentation and source code My presentation, source code, Event Store runners and text files containing the various command line parameters used for curl is now available on GitHub; https://github.com/westleyl/ChesterDevs-EventStore. Don’t worry if you don’t have a GitHub account, you don’t need one, you can just click on the Download Zip button on the right hand menu to download all the files as a single ZIP file.  If all you want is the PowerPoint presentation, go to https://github.com/westleyl/ChesterDevs-EventStore/blob/master/Powerpoint/Huddle-EventStore.pptx, and click on the View Raw button. Downloading and installing Event Store and Tools Download Event Store http://download.geteventstore.com – I unzipped these files into C:\EventStore\v2.0.1 Download Curl from http://curl.haxx.se/download.html – I downloaded Win64 Generic (with SSL) and unzipped these files into C:\curl version 7.31.0 Running the tools I used in my presentation Demonstration 1 (running Event Store) You can use one of my Event Store runner command files to run the single node version of Event Store, using default ports of 2213 for HTTP and 1113  for TCP, and with a wildcard HTTP pattern.  Both take a single command line parameter to specify the location of the data and log files.  The runners assume the single node executable is located in C:\EventStore\v2.0.1, and will placed data files and logs beneath C:\EventStore\Data, i.e. RunEventStore.cmd TestData1 This will create data files in C:\EventStore\Data\TestData1\Data and log files in C:\EventStore\Data\TestData1\logs. If, when running Event Store you may see the following message, [03288,15,06:23:00.622] Failed to start http server Access is denied You will either need to run Event Store in an administrator console window, or you can use the netsh command to create a firewall permission to allow HTTP listening (this will need to be run, once, in an administrator console window), netsh http add urlacl url=http://*:2213/ user=liam You can always delete this later by running the delete; netsh http delete urlacl url=http://*:2213/ If you want to confirm that everything is running OK, open the management console in a browser by navigating to http://127.0.0.1:2213. If at any point you are asked for a user name and password use the default of ‘admin’/‘changeit’. Demonstration 2 (reading and adding data, curl) In my second demonstration I used curl directly from the console to read streams, write events and then read back those events. On GitHub I have included is a set of curl commands, CurlCommandLine.txt, and a sample data file, SampleData.json, to load an event into a DDDNorth3 stream. As there is not much data in the Event Store at this point I used the $stats-127.0.0.1:2113 which is a stream containing performance statistics for Event Store and is updated every 30 seconds (default). Demonstration 3 (projections) On GitHub I have included a sample projection, Projection-ByRoom.txt, which will create streams based on the room on which a session was held on the DDDNorth3 agenda. Browse to the management console, http://127.0.0.1:2213.  Click on Projections, New Projection, give it a name, Sessions-ByRoom, and copy in the JavaScript in the Projection-ByRoom.txt file.  Select Continuous, tick Emit Enabled and then click on Post. It should run immediately. You may by challenged for the administration login for the management console, if so use the default user name and password; 'admin'/'changeit'. Demonstration 4 (C# client) The final demonstration was the Visual Studio 2012 project using the Event Store client – referenced directly as C:\EventStore\v2.0.1\EventStore.ClientAPI.dll, although you can switch this to the latest Event Store client NuGet package. The source code provides a console app for viewing projections with the projection manager (HTTP connection), as well as containing a full set of data for the entire DDDNorth3 agenda.  It also deals with the strategy for reading newest events backwards to older events and ignoring older events that have been superseded. Resources Event Store home page: http://www.geteventstore.com/ Event Store source code on GitHub: https://github.com/eventstore/eventstore Event Store documentation on GitHub: https://github.com/eventstore/eventstore/wiki (includes index to @RobAshton’s blog series on Event Store at https://github.com/eventstore/eventstore/wiki#rob-ashton---projections-series) Event Store forum in Google Groups: https://groups.google.com/forum/?fromgroups#!forum/event-store TopShelf Windows service wrapper is available on github: https://gist.github.com/trbngr/5083266

  Read the article

• DDD North 3 Presentation and source code &ndash; &lsquo;Event Store - an introduction to a DSD for event sourcing and notifications&rsquo;

  - by Liam Westley

  Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/15/ddd-north-3-presentation-and-source-code-ndash-lsquoevent-store.aspxThank you everyone at DDD North Thanks to all the people who helped organise the cracking conference that is DDD North 3, returning to Sunderland, and the great facilities at the University of Sunderland, and the fine drinks reception at Sunderland Software City.  The whole event wouldn’t be possible without the sponsors who ensured over 400 people were kept fed and watered so they could enjoy the impressive range of sessions. And lastly, a thank you to all those delegates who gave up their free time on a Saturday to spend a day dashing between lecture rooms, including a late change to my room which saw 40 people having to brave a journey between buildings in the fine drizzle. The enthusiasm from the delegates always helps recharge my geek batteries. Presentation and source code My presentation, source code, Event Store runners and text files containing the various command line parameters used for curl is now available on GitHub; https://github.com/westleyl/DDDNorth3-EventStore. Don’t worry if you don’t have a GitHub account, you don’t need one, you can just click on the Download Zip button on the right hand menu to download all the files as a single ZIP file.  If all you want is the PowerPoint presentation, go to https://github.com/westleyl/DDDNorth3-EventStore/blob/master/Powerpoint/DDDNorth-EventStore.pptx, and click on the View Raw button. Downloading and installing Event Store and Tools Download Event Store http://download.geteventstore.com – I unzipped these files into C:\EventStore\v2.0.1 Download Curl from http://curl.haxx.se/download.html – I downloaded Win64 Generic (with SSL) and unzipped these files into C:\curl version 7.31.0 Running the tools I used in my presentation Demonstration 1 (running Event Store) You can use one of my Event Store runner command files to run the single node version of Event Store, using default ports of 2213 for HTTP and 1113  for TCP, and with a wildcard HTTP pattern.  Both take a single command line parameter to specify the location of the data and log files.  The runners assume the single node executable is located in C:\EventStore\v2.0.1, and will placed data files and logs beneath C:\EventStore\Data, i.e. RunEventStore.cmd TestData1 This will create data files in C:\EventStore\Data\TestData1\Data and log files in C:\EventStore\Data\TestData1\logs. If, when running Event Store you may see the following message, [03288,15,06:23:00.622] Failed to start http server Access is denied You will either need to run Event Store in an administrator console window, or you can use the netsh command to create a firewall permission to allow HTTP listening (this will need to be run, once, in an administrator console window), netsh http add urlacl url=http://*:2213/ user=liam You can always delete this later by running the delete; netsh http delete urlacl url=http://*:2213/ If you want to confirm that everything is running OK, open the management console in a browser by navigating to http://127.0.0.1:2213. If at any point you are asked for a user name and password use the default of ‘admin’/‘changeit’.   Demonstration 2 (reading and adding data, curl) In my second demonstration I used curl directly from the console to read streams, write events and then read back those events. On GitHub I have included is a set of curl commands, CurlCommandLine.txt, and a sample data file, SampleData.json, to load an event into a DDDNorth3 stream. As there is not much data in the Event Store at this point I used the $stats-127.0.0.1:2113 which is a stream containing performance statistics for Event Store and is updated every 30 seconds (default). Demonstration 3 (projections) On GitHub I have included a sample projection, Projection-ByRoom.txt, which will create streams based on the room on which a session was held on the DDDNorth3 agenda. Browse to the management console, http://127.0.0.1:2213.  Click on Projections, New Projection, give it a name, Sessions-ByRoom, and copy in the JavaScript in the Projection-ByRoom.txt file.  Select Continuous, tick Emit Enabled and then click on Post. It should run immediately. You may by challenged for the administration login for the management console, if so use the default user name and password; 'admin'/'changeit'.   Demonstration 4 (C# client) The final demonstration was the Visual Studio 2012 project using the Event Store client – referenced directly as C:\EventStore\v2.0.1\EventStore.ClientAPI.dll, although you can switch this to the latest Event Store client NuGet package. The source code provides a console app for viewing projections with the projection manager (HTTP connection), as well as containing a full set of data for the entire DDDNorth3 agenda.  It also deals with the strategy for reading newest events backwards to older events and ignoring older events that have been superseded. Resources Event Store home page: http://www.geteventstore.com/ Event Store source code on GitHub: https://github.com/eventstore/eventstore Event Store documentation on GitHub: https://github.com/eventstore/eventstore/wiki (includes index to @RobAshton’s blog series on Event Store at https://github.com/eventstore/eventstore/wiki#rob-ashton---projections-series) Event Store forum in Google Groups: https://groups.google.com/forum/?fromgroups#!forum/event-store TopShelf Windows service wrapper is available on github: https://gist.github.com/trbngr/5083266

  Read the article

• FAT Volume and CE

  - by Kate Moss' Open Space

  Whenever we format a disk volume, it is a good idea to name the label so it will be easier to categorize. To label a volume, we can use LABEL command or UI depends on your preference. Windows CE does provide FAT driver and support various format (FAT12, FAT16,FAT32, ExFAT and TFAT - transaction-safe FAT) and many feature to let you scan and even defrag the volume but not labeling. At any time you format a volume in CE and then mount it on PC, the label is always empty! Of course, you can always label the volume on PC, even it is formatted in CE. So looks like CE does not care about the volume label at all, neither report the label to OS nor changing the label on FAT.So how can we set the volume label in CE? To Answer this question, we need to know how does FAT stores the volume label. Here are some on-line resources are handy for parsing FAT. http://en.wikipedia.org/wiki/File_Allocation_Table http://www.pjrc.com/tech/8051/ide/fat32.html http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx You can refer to PUBLIC\COMMON\OAK\DRIVERS\FSD\FATUTIL\MAIN\bootsec.h and dosbpb.h or the above links for the fields we discuss here. The first sector of a FAT Volume (it is not necessary to be the first sector of a disk.) is a FAT boot sector and BPB (BIOS Parameter Block). And at offset 43, bgbsVolumeLabel (or bsVolumeLabel on FAT16) is for storing the volume lable, but note in the spec also indicates "FAT file system drivers should make sure that they update this field when the volume label file in the root directory has its name changed or created.". So we can't just simply update the bgbsVolumeLabel but also need to create a volume lable file in root directory. The volume lable file is not a real file but just a file entry in root directory with zero file lenth and a very special file attribute, ATTR_VOLUME_ID. (defined in public\common\oak\drivers\fsd\fatutil\MAIN\fatutilp.h) Locating and accessing bootsector is quite straight forward, as long as we know the starting sector of a FAT volume, that's it. But where is the root directory? The layout of a typical FAT is like this Boot sector (Volume ID in the figure) followed by Reserved Sectors (1 on FAT12/16 and 32 on FAT32), then FAT chain table(s) (can be 1 or 2), after that is the root directory (FAT12/16 and not shows in the figure) then begining of the File and Directories. In FAT12/16, the root directory is placed right after FAT so it is not hard to caculate the offset in the volume. But in FAT32, this rule is no longer true: the first cluster of the root directory is determined by BGBPB_RootDirStrtClus (or offset 44 in boot sector). Although this field is usually 0x00000002 (it is how CE initial the root directory after formating a volume. Note we should never assume it is always true) which means the first cluster contains data but not like the root directory is contiguous in FAT12/16, it is just like a regular file can be fragmented. So we need to access the root directory (of FAT32) hopping one cluster to another by traversing FAT table. Let's trace the code now. Although the source of FAT driver is not available in CE Shared Source program, but the formatter, Fatutil.dll, is available in public\common\oak\drivers\fsd\fatutil\MAIN\formatdisk.cpp. Be aware the public code only provides formatter for FAT12/16/32 for ExFAT it is still not available. FormatVolumeInternal is the main worker function. With the knowledge here, you should be able the trace the code easily. But I would like to discuss the following code pieces     dwReservedSectors = (fo.dwFatVersion == 32) ? 32 : 1;     dwRootEntries = (fo.dwFatVersion == 32) ? 0 : fo.dwRootEntries; Note the dwReservedSectors is 32 in FAT32 and 1 in FAT12/16. Root Entries is another different mentioned in previous paragraph, 0 for FAT32 (dynamic allocated) and fixed size (usually 512, defined in DEFAULT_ROOT_ENTRIES in public\common\sdk\inc\fatutil.h) And then here   memset(pBootSec->bsVolumeLabel, 0x20, sizeof(pBootSec->bsVolumeLabel)); It sets the Volume Label as empty string. Now let's carry on to the next section - write the root directory.     if (fo.dwFatVersion == 32) {         if (!(fo.dwFlags & FATUTIL_FORMAT_TFAT)) {             dwRootSectors = dwSectorsPerCluster;         }         else {             DIRENTRY    dirEntry;             DWORD       offset;             int               iVolumeNo;             memset(pbBlock, 0, pdi->di_bytes_per_sect);             memset(&dirEntry, 0, sizeof(DIRENTRY));                         dirEntry.de_attr = ATTR_VOLUME_ID;             // the first one is volume label             memcpy(dirEntry.de_name, "TFAT       ", sizeof (dirEntry.de_name));             memcpy(pbBlock, &dirEntry, sizeof(dirEntry));              ...             // Skip the next step of zeroing out clusters             dwCurrentSec += dwSectorsPerCluster;             dwRootSectors = 0;         }     }     // Each new root directory sector needs to be zeroed.     memset(pbBlock, 0, cbSizeBlk);     iRootSec=0;     while ( iRootSec < dwRootSectors) { Basically, the code zero out the each entry in root directory depends on dwRootSectors. In FAT12/16, the dwRootSectors is calculated as the sectors we need for the root entries (512 for most of the case) and in FAT32 it just zero out the one cluster. Please note that, if it is a TFAT volume, it initialize the root directory with special volume label entries for some special purpose. Despite to its unusual initialization process for TFAT, it does provide a example for how to create a volume entry. With some minor modification, we can assign the volume label in FAT formatter and also remember to sync the volume label with bsVolumeLabel or bgbsVolumeLabel in boot sector.

  Read the article

• F# for the C# Programmer

  - by mbcrump

  Are you a C# Programmer and can’t make it past a day without seeing or hearing someone mention F#?  Today, I’m going to walk you through your first F# application and give you a brief introduction to the language. Sit back this will only take about 20 minutes. Introduction Microsoft's F# programming language is a functional language for the .NET framework that was originally developed at Microsoft Research Cambridge by Don Syme. In October 2007, the senior vice president of the developer division at Microsoft announced that F# was being officially productized to become a fully supported .NET language and professional developers were hired to create a team of around ten people to build the product version. In September 2008, Microsoft released the first Community Technology Preview (CTP), an official beta release, of the F# distribution . In December 2008, Microsoft announced that the success of this CTP had encouraged them to escalate F# and it is now will now be shipped as one of the core languages in Visual Studio 2010 , alongside C++, C# 4.0 and VB. The F# programming language incorporates many state-of-the-art features from programming language research and ossifies them in an industrial strength implementation that promises to revolutionize interactive, parallel and concurrent programming. Advantages of F# F# is the world's first language to combine all of the following features: Type inference: types are inferred by the compiler and generic definitions are created automatically. Algebraic data types: a succinct way to represent trees. Pattern matching: a comprehensible and efficient way to dissect data structures. Active patterns: pattern matching over foreign data structures. Interactive sessions: as easy to use as Python and Mathematica. High performance JIT compilation to native code: as fast as C#. Rich data structures: lists and arrays built into the language with syntactic support. Functional programming: first-class functions and tail calls. Expressive static type system: finds bugs during compilation and provides machine-verified documentation. Sequence expressions: interrogate huge data sets efficiently. Asynchronous workflows: syntactic support for monadic style concurrent programming with cancellations. Industrial-strength IDE support: multithreaded debugging, and graphical throwback of inferred types and documentation. Commerce friendly design and a viable commercial market. Lets try a short program in C# then F# to understand the differences. Using C#: Create a variable and output the value to the console window: Sample Program. using System;   namespace ConsoleApplication9 {     class Program     {         static void Main(string[] args)         {             var a = 2;             Console.WriteLine(a);             Console.ReadLine();         }     } } A breeze right? 14 Lines of code. We could have condensed it a bit by removing the “using” statment and tossing the namespace. But this is the typical C# program. Using F#: Create a variable and output the value to the console window: To start, open Visual Studio 2010 or Visual Studio 2008. Note: If using VS2008, then please download the SDK first before getting started. If you are using VS2010 then you are already setup and ready to go. So, click File-> New Project –> Other Languages –> Visual F# –> Windows –> F# Application. You will get the screen below. Go ahead and enter a name and click OK. Now, you will notice that the Solution Explorer contains the following: Double click the Program.fs and enter the following information. Hit F5 and it should run successfully. Sample Program. open System let a = 2        Console.WriteLine a As Shown below: Hmm, what? F# did the same thing in 3 lines of code. Show me the interactive evaluation that I keep hearing about. The F# development environment for Visual Studio 2010 provides two different modes of execution for F# code: Batch compilation to a .NET executable or DLL. (This was accomplished above). Interactive evaluation. (Demo is below) The interactive session provides a > prompt, requires a double semicolon ;; identifier at the end of a code snippet to force evaluation, and returns the names (if any) and types of resulting definitions and values. To access the F# prompt, in VS2010 Goto View –> Other Window then F# Interactive. Once you have the interactive window type in the following expression: 2+3;; as shown in the screenshot below: I hope this guide helps you get started with the language, please check out the following books for further information. F# Books for further reading   Foundations of F# Author: Robert Pickering An introduction to functional programming with F#. Including many samples, this book walks through the features of the F# language and libraries, and covers many of the .NET Framework features which can be leveraged with F#.       Functional Programming for the Real World: With Examples in F# and C# Authors: Tomas Petricek and Jon Skeet An introduction to functional programming for existing C# developers written by Tomas Petricek and Jon Skeet. This book explains the core principles using both C# and F#, shows how to use functional ideas when designing .NET applications and presents practical examples such as design of domain specific language, development of multi-core applications and programming of reactive applications.

  Read the article

• .NET Security Part 2

  - by Simon Cooper

  So, how do you create partial-trust appdomains? Where do you come across them? There are two main situations in which your assembly runs as partially-trusted using the Microsoft .NET stack: Creating a CLR assembly in SQL Server with anything other than the UNSAFE permission set. The permissions available in each permission set are given here. Loading an assembly in ASP.NET in any trust level other than Full. Information on ASP.NET trust levels can be found here. You can configure the specific permissions available to assemblies using ASP.NET policy files. Alternatively, you can create your own partially-trusted appdomain in code and directly control the permissions and the full-trust API available to the assemblies you load into the appdomain. This is the scenario I’ll be concentrating on in this post. Creating a partially-trusted appdomain There is a single overload of AppDomain.CreateDomain that allows you to specify the permissions granted to assemblies in that appdomain – this one. This is the only call that allows you to specify a PermissionSet for the domain. All the other calls simply use the permissions of the calling code. If the permissions are restricted, then the resulting appdomain is referred to as a sandboxed domain. There are three things you need to create a sandboxed domain: The specific permissions granted to all assemblies in the domain. The application base (aka working directory) of the domain. The list of assemblies that have full-trust if they are loaded into the sandboxed domain. The third item is what allows us to have a fully-trusted API that is callable by partially-trusted code. I’ll be looking at the details of this in a later post. Granting permissions to the appdomain Firstly, the permissions granted to the appdomain. This is encapsulated in a PermissionSet object, initialized either with no permissions or full-trust permissions. For sandboxed appdomains, the PermissionSet is initialized with no permissions, then you add permissions you want assemblies loaded into that appdomain to have by default: PermissionSet restrictedPerms = new PermissionSet(PermissionState.None); // all assemblies need Execution permission to run at all restrictedPerms.AddPermission( new SecurityPermission(SecurityPermissionFlag.Execution)); // grant general read access to C:\config.xml restrictedPerms.AddPermission( new FileIOPermission(FileIOPermissionAccess.Read, @"C:\config.xml")); // grant permission to perform DNS lookups restrictedPerms.AddPermission( new DnsPermission(PermissionState.Unrestricted)); It’s important to point out that the permissions granted to an appdomain, and so to all assemblies loaded into that appdomain, are usable without needing to go through any SafeCritical code (see my last post if you’re unsure what SafeCritical code is). That is, partially-trusted code loaded into an appdomain with the above permissions (and so running under the Transparent security level) is able to create and manipulate a FileStream object to read from C:\config.xml directly. It is only for operations requiring permissions that are not granted to the appdomain that partially-trusted code is required to call a SafeCritical method that then asserts the missing permissions and performs the operation safely on behalf of the partially-trusted code. The application base of the domain This is simply set as a property on an AppDomainSetup object, and is used as the default directory assemblies are loaded from: AppDomainSetup appDomainSetup = new AppDomainSetup { ApplicationBase = @"C:\temp\sandbox", }; If you’ve read the documentation around sandboxed appdomains, you’ll notice that it mentions a security hole if this parameter is set correctly. I’ll be looking at this, and other pitfalls, that will break the sandbox when using sandboxed appdomains, in a later post. Full-trust assemblies in the appdomain Finally, we need the strong names of the assemblies that, when loaded into the appdomain, will be run as full-trust, irregardless of the permissions specified on the appdomain. These assemblies will contain methods and classes decorated with SafeCritical and Critical attributes. I’ll be covering the details of creating full-trust APIs for partial-trust appdomains in a later post. This is how you get the strongnames of an assembly to be executed as full-trust in the sandbox: // get the Assembly object for the assembly Assembly assemblyWithApi = ... // get the StrongName from the assembly's collection of evidence StrongName apiStrongName = assemblyWithApi.Evidence.GetHostEvidence<StrongName>(); Creating the sandboxed appdomain So, putting these three together, you create the appdomain like so: AppDomain sandbox = AppDomain.CreateDomain( "Sandbox", null, appDomainSetup, restrictedPerms, apiStrongName); You can then load and execute assemblies in this appdomain like any other. For example, to load an assembly into the appdomain and get an instance of the Sandboxed.Entrypoint class, implementing IEntrypoint, you do this: IEntrypoint o = (IEntrypoint)sandbox.CreateInstanceFromAndUnwrap( "C:\temp\sandbox\SandboxedAssembly.dll", "Sandboxed.Entrypoint"); // call method the Execute method on this object within the sandbox o.Execute(); The second parameter to CreateDomain is for security evidence used in the appdomain. This was a feature of the .NET 2 security model, and has been (mostly) obsoleted in the .NET 4 model. Unless the evidence is needed elsewhere (eg. isolated storage), you can pass in null for this parameter. Conclusion That’s the basics of sandboxed appdomains. The most important object is the PermissionSet that defines the permissions available to assemblies running in the appdomain; it is this object that defines the appdomain as full or partial-trust. The appdomain also needs a default directory used for assembly lookups as the ApplicationBase parameter, and you can specify an optional list of the strongnames of assemblies that will be given full-trust permissions if they are loaded into the sandboxed appdomain. Next time, I’ll be looking closer at full-trust assemblies running in a sandboxed appdomain, and what you need to do to make an API available to partial-trust code.

  Read the article

• Cross-language Extension Method Calling

  - by Tom Hines

  Extension methods are a concise way of binding functions to particular types. In my last post, I showed how Extension methods can be created in the .NET 2.0 environment. In this post, I discuss calling the extensions from other languages. Most of the differences I find between the Dot Net languages are mainly syntax.  The declaration of Extensions is no exception.  There is, however, a distinct difference with the framework accepting excensions made with C++ that differs from C# and VB.  When calling the C++ extension from C#, the compiler will SOMETIMES say there is no definition for DoCPP with the error: 'string' does not contain a definition for 'DoCPP' and no extension method 'DoCPP' accepting a first argument of type 'string' could be found (are you missing a using directive or an assembly reference?) If I recompile, the error goes away. The strangest problem with calling the C++ extension from C# is that I first must make SOME type of reference to the class BEFORE using the extension or it will not be recognized at all.  So, if I first call the DoCPP() as a static method, the extension works fine later.  If I make a dummy instantiation of the class, it works.  If I have no forward reference of the class, I get the same error as before and recompiling does not fix it.  It seems as if this none of this is supposed to work across the languages. I have made a few work-arounds to get the examples to compile and run. Note the following examples: Extension in C# using System; namespace Extension_CS {    public static class CExtension_CS    {  //in C#, the "this" keyword is the key.       public static void DoCS(this string str)       {          Console.WriteLine("CS\t{0:G}\tCS", str);       }    } } Extension in C++ /****************************************************************************\  * Here is the C++ implementation.  It is the least elegant and most quirky,  * but it works. \****************************************************************************/ #pragma once using namespace System; using namespace System::Runtime::CompilerServices;     //<-Essential // Reference: System.Core.dll //<- Essential namespace Extension_CPP {        public ref class CExtension_CPP        {        public:               [Extension] // or [ExtensionAttribute] /* either works */               static void DoCPP(String^ str)               {                      Console::WriteLine("C++\t{0:G}\tC++", str);               }        }; } Extension in VB ' Here is the VB implementation.  This is not as elegant as the C#, but it's ' functional. Imports System.Runtime.CompilerServices ' Public Module modExtension_VB 'Extension methods can be defined only in modules.    <Extension()> _       Public Sub DoVB(ByVal str As String)       Console.WriteLine("VB" & Chr(9) & "{0:G}" & Chr(9) & "VB", str)    End Sub End Module   Calling program in C# /******************************************************************************\  * Main calling program  * Intellisense and VS2008 complain about the CPP implementation, but with a  * little duct-tape, it works just fine. \******************************************************************************/ using System; using Extension_CPP; using Extension_CS; using Extension_VB; // vitual namespace namespace TestExtensions {    public static class CTestExtensions    {       /**********************************************************************\        * For some reason, this needs a direct reference into the C++ version        * even though it does nothing than add a null reference.        * The constructor provides the fake usage to please the compiler.       \**********************************************************************/       private static CExtension_CPP x = null;   // <-DUCT_TAPE!       static CTestExtensions()       {          // Fake usage to stop compiler from complaining          if (null != x) {} // <-DUCT_TAPE       }       static void Main(string[] args)       {          string strData = "from C#";          strData.DoCPP();          strData.DoCS();          strData.DoVB();       }    } }   Calling program in VB  Imports Extension_CPP Imports Extension_CS Imports Extension_VB Imports System.Runtime.CompilerServices Module TestExtensions_VB    <Extension()> _       Public Sub DoCPP(ByVal str As String)       'Framework does not treat this as an extension, so use the static       CExtension_CPP.DoCPP(str)    End Sub    Sub Main()       Dim strData As String = "from VB"       strData.DoCS()       strData.DoVB()       strData.DoCPP() 'fake    End Sub End Module  Calling program in C++ // TestExtensions_CPP.cpp : main project file. #include "stdafx.h" using namespace System; using namespace Extension_CPP; using namespace Extension_CS; using namespace Extension_VB; void main(void) {        /*******************************************************\         * Extension methods are called like static methods         * when called from C++.  There may be a difference in         * syntax when calling the VB extension as VB Extensions         * are embedded in Modules instead of classes        \*******************************************************/     String^ strData = "from C++";     CExtension_CPP::DoCPP(strData);     CExtension_CS::DoCS(strData);     modExtension_VB::DoVB(strData); //since Extensions go in Modules }

  Read the article

• Mocking successive calls of similar type via sequential mocking

  - by mehfuzh

  In this post , i show how you can benefit from  sequential mocking feature[In JustMock] for setting up expectations with successive calls of same type.  To start let’s first consider the following dummy database and entity class. public class Person {     public virtual string Name { get; set; }     public virtual int Age { get; set; } }   public interface IDataBase {     T Get<T>(); } Now, our test goal is to return different entity for successive calls on IDataBase.Get<T>(). By default, the behavior in JustMock is override , which is similar to other popular mocking tools. By override it means that the tool will consider always the latest user setup. Therefore, the first example will return the latest entity every-time and will fail in line #12: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   Mock.Arrange(() => database.Get<Person>()).Returns(() => queue.Dequeue()); Mock.Arrange(() => database.Get<Person>()).Returns(person2);   // this will fail Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode());   Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); We can solve it the following way using a Queue and that removes the item from bottom on each call: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Queue<Person> queue = new Queue<Person>();   queue.Enqueue(person1); queue.Enqueue(person2);   Mock.Arrange(() => database.Get<Person>()).Returns(queue.Dequeue());   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); This will ensure that right entity is returned but this is not an elegant solution. So, in JustMock we introduced a  new option that lets you set up your expectations sequentially. Like: Person person1 = new Person { Age = 30, Name = "Kosev" }; Person person2 = new Person { Age = 80, Name = "Mihail" };   var database = Mock.Create<IDataBase>();   Mock.Arrange(() => database.Get<Person>()).Returns(person1).InSequence(); Mock.Arrange(() => database.Get<Person>()).Returns(person2).InSequence();   Assert.Equal(person1.GetHashCode(), database.Get<Person>().GetHashCode()); Assert.Equal(person2.GetHashCode(), database.Get<Person>().GetHashCode()); The  “InSequence” modifier will tell the mocking tool to return the expected result as in the order it is specified by user. The solution though pretty simple and but neat(to me) and way too simpler than using a collection to solve this type of cases. Hope that helps P.S. The example shown in my blog is using interface don’t require a profiler  and you can even use a notepad and build it referencing Telerik.JustMock.dll, run it with GUI tools and it will work. But this feature also applies to concrete methods that includes JM profiler and can be implemented for more complex scenarios.

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• Is this proper OO design for C++?

  - by user121917

  I recently took a software processes course and this is my first time attempting OO design on my own. I am trying to follow OO design principles and C++ conventions. I attempted and gave up on MVC for this application, but I am trying to "decouple" my classes such that they can be easily unit-tested and so that I can easily change the GUI library used and/or the target OS. At this time, I have finished designing classes but have not yet started implementing methods. The function of the software is to log all packets sent and received, and display them on the screen (like WireShark, but for one local process only). The software accomplishes this by hooking the send() and recv() functions in winsock32.dll, or some other pair of analogous functions depending on what the intended Target is. The hooks add packets to SendPacketList/RecvPacketList. The GuiLogic class starts a thread which checks for new packets. When new packets are found, it utilizes the PacketFilter class to determine the formatting for the new packet, and then sends it to MainWindow, a native win32 window (with intent to later port to Qt).1 Full size image of UML class diagram Here are my classes in skeleton/header form (this is my actual code): class PacketModel { protected: std::vector<byte> data; int id; public: PacketModel(); PacketModel(byte* data, unsigned int size); PacketModel(int id, byte* data, unsigned int size); int GetLen(); bool IsValid(); //len >= sizeof(opcode_t) opcode_t GetOpcode(); byte* GetData(); //returns &(data[0]) bool GetData(byte* outdata, int maxlen); void SetData(byte* pdata, int len); int GetId(); void SetId(int id); bool ParseData(char* instr); bool StringRepr(char* outstr); byte& operator[] (const int index); }; class SendPacket : public PacketModel { protected: byte* returnAddy; public: byte* GetReturnAddy(); void SetReturnAddy(byte* addy); }; class RecvPacket : public PacketModel { protected: byte* callAddy; public: byte* GetCallAddy(); void SetCallAddy(byte* addy); }; //problem: packets may be added to list at any time by any number of threads //solution: critical section associated with each packet list class Synch { public: void Enter(); void Leave(); }; template<class PacketType> class PacketList { private: static const int MAX_STORED_PACKETS = 1000; public: static const int DEFAULT_SHOWN_PACKETS = 100; private: vector<PacketType> list; Synch synch; //wrapper for critical section public: void AddPacket(PacketType* packet); PacketType* GetPacket(int id); int TotalPackets(); }; class SendPacketList : PacketList<SendPacket> { }; class RecvPacketList : PacketList<RecvPacket> { }; class Target //one socket { bool Send(SendPacket* packet); bool Inject(RecvPacket* packet); bool InitSendHook(SendPacketList* sendList); bool InitRecvHook(RecvPacketList* recvList); }; class FilterModel { private: opcode_t opcode; int colorID; bool bFilter; char name[41]; }; class FilterFile { private: FilterModel filter; public: void Save(); void Load(); FilterModel* GetFilter(opcode_t opcode); }; class PacketFilter { private: FilterFile filters; public: bool IsFiltered(opcode_t opcode); bool GetName(opcode_t opcode, char* namestr); //return false if name does not exist COLORREF GetColor(opcode_t opcode); //return default color if no custom color }; class GuiLogic { private: SendPacketList sendList; RecvPacketList recvList; PacketFilter packetFilter; void GetPacketRepr(PacketModel* packet); void ReadNew(); void AddToWindow(); public: void Refresh(); //called from thread void GetPacketInfo(int id); //called from MainWindow }; I'm looking for a general review of my OO design, use of UML, and use of C++ features. I especially just want to know if I'm doing anything considerably wrong. From what I've read, design review is on-topic for this site (and off-topic for the Code Review site). Any sort of feedback is greatly appreciated. Thanks for reading this.

  Read the article

• Sort Data in Windows Phone using Collection View Source

  - by psheriff

  When you write a Windows Phone application you will most likely consume data from a web service somewhere. If that service returns data to you in a sort order that you do not want, you have an easy alternative to sort the data without writing any C# or VB code. You use the built-in CollectionViewSource object in XAML to perform the sorting for you. This assumes that you can get the data into a collection that implements the IEnumerable or IList interfaces.For this example, I will be using a simple Product class with two properties, and a list of Product objects using the Generic List class. Try this out by creating a Product class as shown in the following code:public class Product {  public Product(int id, string name)   {    ProductId = id;    ProductName = name;  }  public int ProductId { get; set; }  public string ProductName { get; set; }}Create a collection class that initializes a property called DataCollection with some sample data as shown in the code below:public class Products : List<Product>{  public Products()  {    InitCollection();  }  public List<Product> DataCollection { get; set; }  List<Product> InitCollection()  {    DataCollection = new List<Product>();    DataCollection.Add(new Product(3,        "PDSA .NET Productivity Framework"));    DataCollection.Add(new Product(1,        "Haystack Code Generator for .NET"));    DataCollection.Add(new Product(2,        "Fundamentals of .NET eBook"));    return DataCollection;  }}Notice that the data added to the collection is not in any particular order. Create a Windows Phone page and add two XML namespaces to the Page.xmlns:scm="clr-namespace:System.ComponentModel;assembly=System.Windows"xmlns:local="clr-namespace:WPSortData"The 'local' namespace is an alias to the name of the project that you created (in this case WPSortData). The 'scm' namespace references the System.Windows.dll and is needed for the SortDescription class that you will use for sorting the data. Create a phone:PhoneApplicationPage.Resources section in your Windows Phone page that looks like the following:<phone:PhoneApplicationPage.Resources>  <local:Products x:Key="products" />  <CollectionViewSource x:Key="prodCollection"      Source="{Binding Source={StaticResource products},                       Path=DataCollection}">    <CollectionViewSource.SortDescriptions>      <scm:SortDescription PropertyName="ProductName"                           Direction="Ascending" />    </CollectionViewSource.SortDescriptions>  </CollectionViewSource></phone:PhoneApplicationPage.Resources>The first line of code in the resources section creates an instance of your Products class. The constructor of the Products class calls the InitCollection method which creates three Product objects and adds them to the DataCollection property of the Products class. Once the Products object is instantiated you now add a CollectionViewSource object in XAML using the Products object as the source of the data to this collection. A CollectionViewSource has a SortDescriptions collection that allows you to specify a set of SortDescription objects. Each object can set a PropertyName and a Direction property. As you see in the above code you set the PropertyName equal to the ProductName property of the Product object and tell it to sort in an Ascending direction.All you have to do now is to create a ListBox control and set its ItemsSource property to the CollectionViewSource object. The ListBox displays the data in sorted order by ProductName and you did not have to write any LINQ queries or write other code to sort the data!<ListBox    ItemsSource="{Binding Source={StaticResource prodCollection}}"   DisplayMemberPath="ProductName" />SummaryIn this blog post you learned that you can sort any data without having to change the source code of where the data comes from. Simply feed the data into a CollectionViewSource in XAML and set some sort descriptions in XAML and the rest is done for you! This comes in very handy when you are consuming data from a source where the data is given to you and you do not have control over the sorting.NOTE: You can download this article and many samples like the one shown in this blog entry at my website. http://www.pdsa.com/downloads. Select “Tips and Tricks”, then “Sort Data in Windows Phone using Collection View Source” from the drop down list.Good Luck with your Coding,Paul Sheriff** SPECIAL OFFER FOR MY BLOG READERS **We frequently offer a FREE gift for readers of my blog. Visit http://www.pdsa.com/Event/Blog for your FREE gift!

  Read the article

• How To Get Web Site Thumbnail Image In ASP.NET

  - by SAMIR BHOGAYTA

  Overview One very common requirement of many web applications is to display a thumbnail image of a web site. A typical example is to provide a link to a dynamic website displaying its current thumbnail image, or displaying images of websites with their links as a result of search (I love to see it on Google). Microsoft .NET Framework 2.0 makes it quite easier to do it in a ASP.NET application. Background In order to generate image of a web page, first we need to load the web page to get their html code, and then this html needs to be rendered in a web browser. After that, a screen shot can be taken easily. I think there is no easier way to do this. Before .NET framework 2.0 it was quite difficult to use a web browser in C# or VB.NET because we either have to use COM+ interoperability or third party controls which becomes headache later. WebBrowser control in .NET framework 2.0 In .NET framework 2.0 we have a new Windows Forms WebBrowser control which is a wrapper around old shwdoc.dll. All you really need to do is to drop a WebBrowser control from your Toolbox on your form in .NET framework 2.0. If you have not used WebBrowser control yet, it's quite easy to use and very consistent with other Windows Forms controls. Some important methods of WebBrowser control are. public bool GoBack(); public bool GoForward(); public void GoHome(); public void GoSearch(); public void Navigate(Uri url); public void DrawToBitmap(Bitmap bitmap, Rectangle targetBounds); These methods are self explanatory with their names like Navigate function which redirects browser to provided URL. It also has a number of useful overloads. The DrawToBitmap (inherited from Control) draws the current image of WebBrowser to the provided bitmap. Using WebBrowser control in ASP.NET 2.0 The Solution Let's start to implement the solution which we discussed above. First we will define a static method to get the web site thumbnail image. public static Bitmap GetWebSiteThumbnail(string Url, int BrowserWidth, int BrowserHeight, int ThumbnailWidth, int ThumbnailHeight) { WebsiteThumbnailImage thumbnailGenerator = new WebsiteThumbnailImage(Url, BrowserWidth, BrowserHeight, ThumbnailWidth, ThumbnailHeight); return thumbnailGenerator.GenerateWebSiteThumbnailImage(); } The WebsiteThumbnailImage class will have a public method named GenerateWebSiteThumbnailImage which will generate the website thumbnail image in a separate STA thread and wait for the thread to exit. In this case, I decided to Join method of Thread class to block the initial calling thread until the bitmap is actually available, and then return the generated web site thumbnail. public Bitmap GenerateWebSiteThumbnailImage() { Thread m_thread = new Thread(new ThreadStart(_GenerateWebSiteThumbnailImage)); m_thread.SetApartmentState(ApartmentState.STA); m_thread.Start(); m_thread.Join(); return m_Bitmap; } The _GenerateWebSiteThumbnailImage will create a WebBrowser control object and navigate to the provided Url. We also register for the DocumentCompleted event of the web browser control to take screen shot of the web page. To pass the flow to the other controls we need to perform a method call to Application.DoEvents(); and wait for the completion of the navigation until the browser state changes to Complete in a loop. private void _GenerateWebSiteThumbnailImage() { WebBrowser m_WebBrowser = new WebBrowser(); m_WebBrowser.ScrollBarsEnabled = false; m_WebBrowser.Navigate(m_Url); m_WebBrowser.DocumentCompleted += new WebBrowserDocument CompletedEventHandler(WebBrowser_DocumentCompleted); while (m_WebBrowser.ReadyState != WebBrowserReadyState.Complete) Application.DoEvents(); m_WebBrowser.Dispose(); } The DocumentCompleted event will be fired when the navigation is completed and the browser is ready for screen shot. We will get screen shot using DrawToBitmap method as described previously which will return the bitmap of the web browser. Then the thumbnail image is generated using GetThumbnailImage method of Bitmap class passing it the required thumbnail image width and height. private void WebBrowser_DocumentCompleted(object sender, WebBrowserDocumentCompletedEventArgs e) { WebBrowser m_WebBrowser = (WebBrowser)sender; m_WebBrowser.ClientSize = new Size(this.m_BrowserWidth, this.m_BrowserHeight); m_WebBrowser.ScrollBarsEnabled = false; m_Bitmap = new Bitmap(m_WebBrowser.Bounds.Width, m_WebBrowser.Bounds.Height); m_WebBrowser.BringToFront(); m_WebBrowser.DrawToBitmap(m_Bitmap, m_WebBrowser.Bounds); m_Bitmap = (Bitmap)m_Bitmap.GetThumbnailImage(m_ThumbnailWidth, m_ThumbnailHeight, null, IntPtr.Zero); } One more example here : http://www.codeproject.com/KB/aspnet/Website_URL_Screenshot.aspx

  Read the article

• How can I read kindle book under xfce(ubuntu)? (using chromebook)(wine not working)

  - by yshn

  I'm using chromebook, dual booting xfce(ubuntu) and cr os. The ebook I bought on amazon is not supported on kindle cloud reader. (Under xfce)I downloaded wine and tried installing kindle for pc under wine, and after couples of times of trials, it always said installation error and could not install kindle, and it's been giving me: Unhandled exception: unimplemented function msvcp90.dll.??0?$basic_ofstream@DU?$char_traits@D@std@@@std@@QAE@XZ called in 32-bit code (0x7b839cf2). Register dump: CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b EIP:7b839cf2 ESP:0033fcd4 EBP:0033fd38 EFLAGS:00000287( - -- I S - -P-C) EAX:7b826245 EBX:7b894ff4 ECX:00000008 EDX:0033fcf4 ESI:80000100 EDI:00dca568 Stack dump: 0x0033fcd4: 0033fd58 00000008 00000030 80000100 0x0033fce4: 00000001 00000000 7b839cf2 00000002 0x0033fcf4: 7e24b340 7e24f2ca 0000000d 00110000 0x0033fd04: 7bc47a0d 7e1dbff4 7e1417f0 00dca568 0x0033fd14: 0033fd24 7bc65d0b 00110000 00000000 0x0033fd24: 0033fd44 7e141801 7b839caa 7e1dbff4 000c: sel=0067 base=00000000 limit=00000000 16-bit r-x Backtrace: =0 0x7b839cf2 in kernel32 (+0x29cf2) (0x0033fd38) 1 0x7e24b2a8 in msvcp90 (+0x3b2a7) (0x0033fd68) 2 0x7e216c9d in msvcp90 (+0x6c9c) (0x0033fde8) 3 0x00938fdd in kindle (+0x538fdc) (0x0033fde8) 4 0x0089dc71 in kindle (+0x49dc70) (0x0033fe70) 5 0x7b859cdc call_process_entry+0xb() in kernel32 (0x0033fe88) 6 0x7b85af4f in kernel32 (+0x4af4e) (0x0033fec8) 7 0x7bc71db0 call_thread_func_wrapper+0xb() in ntdll (0x0033fed8) 8 0x7bc7486d call_thread_func+0x7c() in ntdll (0x0033ffa8) 9 0x7bc71d8e RtlRaiseException+0x21() in ntdll (0x0033ffc8) 10 0x7bc49f4e call_dll_entry_point+0x61d() in ntdll (0x0033ffe8) 0x7b839cf2: subl $4,%esp Modules: Module Address Debug info Name (130 modules) PE 340000- 37d000 Deferred ssleay32 PE 390000- 3ca000 Deferred webcoreviewer PE 3d0000- 3e0000 Deferred pthreadvc2 PE 400000- 1433000 Export kindle PE 1440000- 155c000 Deferred libeay32 PE 1560000- 169f000 Deferred qtscript4 PE 16a0000- 1795000 Deferred libxml2 PE 17a0000- 18c7000 Deferred javascriptcore PE 18d0000- 1974000 Deferred cflite PE 1980000- 2048000 Deferred libwebcore PE 2050000- 208d000 Deferred libjpeg PE 10000000-10a34000 Deferred qtwebkit4 PE 4a800000-4a8eb000 Deferred icuuc46 PE 4a900000-4aa36000 Deferred icuin46 PE 4ad00000-4bb80000 Deferred icudt46 PE 5a4c0000-5a4d4000 Deferred zlib1 PE 61000000-61056000 Deferred qtxml4 PE 62000000-62093000 Deferred qtsql4 PE 64000000-640ef000 Deferred qtnetwork4 PE 65000000-657b8000 Deferred qtgui4 PE 67000000-67228000 Deferred qtcore4 PE 78050000-780b9000 Deferred msvcp100 PE 78aa0000-78b5e000 Deferred msvcr100 ELF 7b800000-7ba15000 Dwarf kernel32 -PE 7b810000-7ba15000 \ kernel32 ELF 7bc00000-7bcc3000 Dwarf ntdll -PE 7bc10000-7bcc3000 \ ntdll ELF 7bf00000-7bf04000 Deferred ELF 7d7f7000-7d800000 Deferred librt.so.1 ELF 7d800000-7d818000 Deferred libresolv.so.2 ELF 7d818000-7d861000 Deferred libdbus-1.so.3 ELF 7d861000-7d873000 Deferred libp11-kit.so.0 ELF 7d873000-7d8f8000 Deferred libgcrypt.so.11 ELF 7d8f8000-7d90a000 Deferred libtasn1.so.3 ELF 7d90a000-7d913000 Deferred libkrb5support.so.0 ELF 7d913000-7d9e2000 Deferred libkrb5.so.3 ELF 7da42000-7da47000 Deferred libgpg-error.so.0 ELF 7da47000-7da6f000 Deferred libk5crypto.so.3 ELF 7da6f000-7da81000 Deferred libavahi-client.so.3 ELF 7da81000-7da8f000 Deferred libavahi-common.so.3 ELF 7da8f000-7db53000 Deferred libgnutls.so.26 ELF 7db53000-7db91000 Deferred libgssapi_krb5.so.2 ELF 7db91000-7dbe4000 Deferred libcups.so.2 ELF 7dc21000-7dc55000 Deferred uxtheme -PE 7dc30000-7dc55000 \ uxtheme ELF 7dc55000-7dc5b000 Deferred libxfixes.so.3 ELF 7dc5b000-7dc66000 Deferred libxcursor.so.1 ELF 7dc6a000-7dc6e000 Deferred libkeyutils.so.1 ELF 7dc6e000-7dc73000 Deferred libcom_err.so.2 ELF 7dca5000-7dccf000 Deferred libexpat.so.1 ELF 7dccf000-7dd03000 Deferred libfontconfig.so.1 ELF 7dd03000-7dd13000 Deferred libxi.so.6 ELF 7dd13000-7dd17000 Deferred libxcomposite.so.1 ELF 7dd17000-7dd20000 Deferred libxrandr.so.2 ELF 7dd20000-7dd2a000 Deferred libxrender.so.1 ELF 7dd2a000-7dd30000 Deferred libxxf86vm.so.1 ELF 7dd30000-7dd34000 Deferred libxinerama.so.1 ELF 7dd34000-7dd3b000 Deferred libxdmcp.so.6 ELF 7dd3b000-7dd5c000 Deferred libxcb.so.1 ELF 7dd5c000-7dd76000 Deferred libice.so.6 ELF 7dd76000-7deaa000 Deferred libx11.so.6 ELF 7deaa000-7debc000 Deferred libxext.so.6 ELF 7debc000-7dec5000 Deferred libsm.so.6 ELF 7ded4000-7df67000 Deferred winex11 -PE 7dee0000-7df67000 \ winex11 ELF 7df67000-7e001000 Deferred libfreetype.so.6 ELF 7e001000-7e023000 Deferred iphlpapi -PE 7e010000-7e023000 \ iphlpapi ELF 7e023000-7e03e000 Deferred wsock32 -PE 7e030000-7e03e000 \ wsock32 ELF 7e03e000-7e071000 Deferred wintrust -PE 7e040000-7e071000 \ wintrust ELF 7e071000-7e129000 Deferred crypt32 -PE 7e080000-7e129000 \ crypt32 ELF 7e129000-7e158000 Deferred msvcr90 -PE 7e130000-7e158000 \ msvcr90 ELF 7e158000-7e1e5000 Deferred msvcrt -PE 7e170000-7e1e5000 \ msvcrt ELF 7e1e5000-7e2ca000 Dwarf msvcp90 -PE 7e210000-7e2ca000 \ msvcp90 ELF 7e2ca000-7e2ec000 Deferred imm32 -PE 7e2d0000-7e2ec000 \ imm32 ELF 7e2ec000-7e3de000 Deferred oleaut32 -PE 7e300000-7e3de000 \ oleaut32 ELF 7e3de000-7e418000 Deferred winspool -PE 7e3f0000-7e418000 \ winspool ELF 7e418000-7e4f7000 Deferred comdlg32 -PE 7e420000-7e4f7000 \ comdlg32 ELF 7e4f7000-7e51f000 Deferred msacm32 -PE 7e500000-7e51f000 \ msacm32 ELF 7e51f000-7e5cc000 Deferred winmm -PE 7e530000-7e5cc000 \ winmm ELF 7e5cc000-7e641000 Deferred rpcrt4 -PE 7e5e0000-7e641000 \ rpcrt4 ELF 7e641000-7e749000 Deferred ole32 -PE 7e660000-7e749000 \ ole32 ELF 7e749000-7e841000 Deferred comctl32 -PE 7e750000-7e841000 \ comctl32 ELF 7e841000-7ea52000 Deferred shell32 -PE 7e850000-7ea52000 \ shell32 ELF 7ea52000-7eabc000 Deferred shlwapi -PE 7ea60000-7eabc000 \ shlwapi ELF 7eabc000-7ead5000 Deferred version -PE 7eac0000-7ead5000 \ version ELF 7ead5000-7eb35000 Deferred advapi32 -PE 7eae0000-7eb35000 \ advapi32 ELF 7eb35000-7ebf2000 Deferred gdi32 -PE 7eb40000-7ebf2000 \ gdi32 ELF 7ebf2000-7ed32000 Deferred user32 -PE 7ec00000-7ed32000 \ user32 ELF 7ed32000-7ed58000 Deferred mpr -PE 7ed40000-7ed58000 \ mpr ELF 7ed58000-7ed6e000 Deferred libz.so.1 ELF 7ed6e000-7eddd000 Deferred wininet -PE 7ed80000-7eddd000 \ wininet ELF 7eddd000-7ee0f000 Deferred ws2_32 -PE 7ede0000-7ee0f000 \ ws2_32 ELF 7ee0f000-7ee1c000 Deferred libnss_files.so.2 ELF 7ee1c000-7ee28000 Deferred libnss_nis.so.2 ELF 7ee28000-7ee42000 Deferred libnsl.so.1 ELF 7ee42000-7ee4b000 Deferred libnss_compat.so.2 ELF 7efd4000-7f000000 Deferred libm.so.6 ELF f74a3000-f74a7000 Deferred libxau.so.6 ELF f74a8000-f74ad000 Deferred libdl.so.2 ELF f74ad000-f7657000 Deferred libc.so.6 ELF f7658000-f7673000 Deferred libpthread.so.0 ELF f7675000-f767b000 Deferred libuuid.so.1 ELF f7682000-f77c4000 Dwarf libwine.so.1 ELF f77c6000-f77e8000 Deferred ld-linux.so.2 ELF f77e8000-f77e9000 Deferred [vdso].so Threads: process tid prio (all id:s are in hex) 0000000e services.exe 0000001f 0 0000001e 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001c 0 00000019 0 00000014 0 00000013 0 0000001a plugplay.exe 00000020 0 0000001d 0 0000001b 0 00000037 explorer.exe 00000038 0 00000042 (D) C:\Program Files (x86)\Amazon\Kindle\Kindle.exe 00000043 0 <== System information: Wine build: wine-1.4 Platform: i386 (WOW64) Host system: Linux Host version: 3.8.11 How can this be fixed?

  Read the article

• Project of Projects with team Foundation Server 2010

  - by Martin Hinshelwood

  It is pretty much accepted that you should use Areas instead of having many small Team Projects when you are using Team Foundation Server 2010. I have implemented this scenario many times and this is the current iteration of layout and considerations. If like me you work with many customers you will find that you get into a grove for how to set these things up to make them as easily understandable for everyone, while giving the best functionality. The trick is in making it as intuitive as possible for both you and the developers that need to work with it. There are five main places where you need to have the Product or Project name in prominence of any other value. Area Iteration Source Code Work Item Queries Build Once you decide how you are doing this in each of these places you need to keep to it religiously. Evan if you have one source code file to keep, make sure it is in the right place. This makes your developers and others working with the format familiar with where everything should go, as well as building up mussel memory. This prevents the neat system degenerating into a nasty mess. Areas Areas are traditionally used to separate out parts of your product / project so that you can see how much effort has gone into each. Figure: The top level areas are for reporting and work item separation There are massive advantages of using this method. You can: move work from one project to another rename a project / product It is far more likely that a project or product gets renamed than a department. Tip: If you have many projects, over 100, you should consider categorising them here, but make sure that the actual project name always sits at the same level so you know which is which. Figure: Always keep things that are the same at the same level Note: You may use these categories only at the Area/Iteration level to make it easier to select on drop down lists. You may not want to use them everywhere. On the other hand, for consistency it would be better to. Iterations Iterations are usually used to some sort of time based consideration. Here I am splitting into Iterations with periodic releases. Figure: Each product needs to be able to have its own cadence The ability to have each project run at its own pace and to enable them to have their own release schedule is often of paramount importance and you don’t want to fix your 100+ projects to all be released on the same date. Source Code Having a good structure for your source even if you are not branching or having multiple products under the same structure is always a good idea. Figure: Separate out your products source You need to think about both your branches as well as the structure of your source. All your code should be under “Source” and everything you need to build your solution including Build Scripts and 3rd party tools should be under your “Main” (branch) folder. This should them be branched by “Quality”, “Release” or both to get the most out of your branching structure. The important thing is to make sure you branch (or be able to branch) everything you need to build, test and deploy your application to an environment. That environment may be development, test or even production, but I can’t stress the importance of having everything your need. Note: You usually will not be able to install custom software on your build server. Store any *.dll’s or *.exe’s that you need under the “Tools\Tool1” folder. Note: Consult the Branching Guidance for Team Foundation Server 2010 for more on branching Figure: Adding category may be a necessary evil Even if you have to have a couple of categories called “Default”, it is better than not knowing the difference between a folder, Product and Branch. Work Item Queries Queries are used to load lists of Work Items out of TFS so you can see what work you have. This means that you want to also separate queries out by Product / project to make it easier to Figure: Again you have the same first level structure Having Folders also in Work Item Tracking we do the same thing. We put all the queries under a folder named for the Product / Project and change each query to have “AreaPath=[TeamProject]\[ProductX]” in the query instead of the standard “Project=@Project”. Tip: Don’t have a folder with new queries for each iteration. Instead have a single “Current” folder that has queries that point to the current iteration. Just change the queries as you move from one iteration to another. Tip: You can ctrl+drag the “Product1” folder to create your “Product2” folder. Builds You may have many builds both for individual products but also for different quality's. This can be further complicated by having some builds that action “Gated Check-In” and others that are specifically for “Release”, “Test” or another purpose. Figure: There are no folders, yet, for the builds so you need a good naming convention Its a pity that there are no folders under builds, some way to categorise would be nice. In lue of that at the moment you can use a functional naming convention that at least allows you to find what you want. Conclusion It is really easy to both achieve and to stick to this format if you take the time to do it. Unless you have 1000+ builds or 100+ Products you are unlikely run into any issues. Even then there are things you can do to mitigate the issues and I have describes some of them above. Let me know if you can think of any other things to make this easier.

  Read the article

• Database Rebuild

  - by Robert May

  I promised I’d have a simpler mechanism for rebuilding the database.  Below is a complete MSBuild targets file for rebuilding the database from scratch.  I don’t know if I’ve explained the rational for this.  The reason why you’d WANT to do this is so that each developer has a clean version of the database on their local machine.  This also includes the continuous integration environment.  Basically, you can do whatever you want to the database without fear, and in a minute or two, have a completely rebuilt database structure. DBDeploy (including the KTSC build task for dbdeploy) is used in this script to do change tracking on the database itself.  The MSBuild ExtensionPack is used in this target file.  You can get an MSBuild DBDeploy task here. There are two database scripts that you’ll see below.  First is the task for creating an admin (dbo) user in the system.  This script looks like the following: USE [master] GO If not Exists (select Name from sys.sql_logins where name = '$(User)') BEGIN CREATE LOGIN [$(User)] WITH PASSWORD=N'$(Password)', DEFAULT_DATABASE=[$(DatabaseName)], CHECK_EXPIRATION=OFF, CHECK_POLICY=OFF END GO EXEC master..sp_addsrvrolemember @loginame = N'$(User)', @rolename = N'sysadmin' GO USE [$(DatabaseName)] GO CREATE USER [$(User)] FOR LOGIN [$(User)] GO ALTER USER [$(User)] WITH DEFAULT_SCHEMA=[dbo] GO EXEC sp_addrolemember N'db_owner', N'$(User)' GO The second creates the changelog table.  This script can also be found in the dbdeploy.net install\scripts directory. CREATE TABLE changelog ( change_number INTEGER NOT NULL, delta_set VARCHAR(10) NOT NULL, start_dt DATETIME NOT NULL, complete_dt DATETIME NULL, applied_by VARCHAR(100) NOT NULL, description VARCHAR(500) NOT NULL ) GO ALTER TABLE changelog ADD CONSTRAINT Pkchangelog PRIMARY KEY (change_number, delta_set) GO Finally, Here’s the targets file. <Projectxmlns="http://schemas.microsoft.com/developer/msbuild/2003" ToolsVersion="4.0" DefaultTargets="Update">   <PropertyGroup>     <DatabaseName>TestDatabase</DatabaseName>     <Server>localhost</Server>     <ScriptDirectory>.\Scripts</ScriptDirectory>     <RebuildDirectory>.\Rebuild</RebuildDirectory>     <TestDataDirectory>.\TestData</TestDataDirectory>     <DbDeploy>.\DBDeploy</DbDeploy>     <User>TestUser</User>     <Password>TestPassword</Password>     <BCP>bcp</BCP>     <BCPOptions>-S$(Server) -U$(User) -P$(Password) -N -E -k</BCPOptions>     <OutputFileName>dbDeploy-output.sql</OutputFileName>     <UndoFileName>dbDeploy-output-undo.sql</UndoFileName>     <LastChangeToApply>99999</LastChangeToApply>   </PropertyGroup>     <ImportProject="$(MSBuildExtensionsPath)\ExtensionPack\4.0\MSBuild.ExtensionPack.tasks"/>   <UsingTask TaskName="Ktsc.Build.DBDeploy" AssemblyFile="$(DbDeploy)\Ktsc.Build.dll"/>   <ItemGroup>     <VariableInclude="DatabaseName">       <Value>$(DatabaseName)</Value>     </Variable>     <VariableInclude="Server">       <Value>$(Server)</Value>     </Variable>     <VariableInclude="User">       <Value>$(User)</Value>     </Variable>     <VariableInclude="Password">       <Value>$(Password)</Value>     </Variable>   </ItemGroup>     <TargetName="Rebuild">     <!--Take the database offline to disconnect any users. Requires that the current user is an admin of the sql server machine.-->     <MSBuild.ExtensionPack.SqlServer.SqlCmd Variables="@(Variable)" Database="$(DatabaseName)" TaskAction="Execute" CommandLineQuery ="ALTER DATABASE $(DatabaseName) SET OFFLINE WITH ROLLBACK IMMEDIATE"/>         <!--Bring it back online.  If you don't, the database files won't be deleted.-->     <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="SetOnline" DatabaseItem="$(DatabaseName)"/>     <!--Delete the database, removing the existing files.-->     <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="Delete" DatabaseItem="$(DatabaseName)"/>     <!--Create the new database in the default database path location.-->     <MSBuild.ExtensionPack.Sql2008.DatabaseTaskAction="Create" DatabaseItem="$(DatabaseName)" Force="True"/>         <!--Create admin user-->     <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" InputFiles="$(RebuildDirectory)\0002 Create Admin User.sql" Variables="@(Variable)" />     <!--Create the dbdeploy changelog.-->     <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" LogOn="$(User)" Password="$(Password)" InputFiles="$(RebuildDirectory)\0003 Create Changelog.sql" Variables="@(Variable)" />     <CallTarget Targets="Update;ImportData"/>     </Target>    <TargetName="Update" DependsOnTargets="CreateUpdateScript">     <MSBuild.ExtensionPack.SqlServer.SqlCmd TaskAction="Execute" Server="(local)" Database="$(DatabaseName)" LogOn="$(User)" Password="$(Password)" InputFiles="$(OutputFileName)" Variables="@(Variable)" />   </Target>   <TargetName="CreateUpdateScript">     <ktsc.Build.DBDeploy DbType="mssql"                                        DbConnection="User=$(User);Password=$(Password);Data Source=$(Server);Initial Catalog=$(DatabaseName);"                                        Dir="$(ScriptDirectory)"                                        OutputFile="..\$(OutputFileName)"                                        UndoOutputFile="..\$(UndoFileName)"                                        LastChangeToApply="$(LastChangeToApply)"/>   </Target>     <TargetName="ImportData">     <ItemGroup>       <TestData Include="$(TestDataDirectory)\*.dat"/>     </ItemGroup>     <ExecCommand="$(BCP) $(DatabaseName).dbo.%(TestData.Filename) in&quot;%(TestData.Identity)&quot;$(BCPOptions)"/>   </Target> </Project> Technorati Tags: MSBuild

  Read the article

• BizTalk 2009 - Custom Functoid Wizard

  - by StuartBrierley

  When creating BizTalk maps you may find that there are times when you need perform tasks that the standard functoids do not cover.  At other times you may find yourself reapeating a pattern of standard functoids over and over again, adding visual complexity to an otherwise simple process.  In these cases you may find it preferable to create your own custom functoids.  In the past I have created a number of custom functoids from scratch, but recently I decided to try out the Custom Functoid Wizard for BizTalk 2009. After downloading and installing the wizard you should start Visual Studio and select to create a new BizTalk Server Functoid Project. Following the splash screen you will be presented with the General Properties screen, where you can set the classname, namespace, assembly name and strong name key file. The next screen is the first set of properties for the functoid.  First of all is the fuctoid ID; this must be a value above 6000. You should also then set the name, tooltip and description of the functoid.  The name will appear in the visual studio toolbox and the tooltip on hover over in the toolbox.  The descrition will be shown when you configure the functoid inputs when using it in a map; as such it should provide a decent level of information to allow the functoid to be used. Next you must set the category, exception mesage, icon and implementation language.  The category will affect the positioning of the functoid within the toolbox and also some of the behaviours of the functoid. We must then define the parameters and connections for our new functoid.  Here you can define the names and types of your input parameters along with the minimum and maximum number of input connections.  You will also need to define the types of connections accepted and the output type of the functoid. Finally you can click finish and your custom functoid project will be created. The results of this process can be seen in the solution explorer, where you will see that a project, functoid class file and a resource file have been created for you. If you open the class file you will see that the following code has been created for you: The "base" function sets all the properties that you previsouly detailed in the custom functoid wizard.  public TestFunctoids():base()  {    int functoidID;    // This has to be a number greater than 6000    functoidID = System.Convert.ToInt32(resmgr.GetString("FunctoidId"));    this.ID = functoidID;    // Set Resource strings, bitmaps    SetupResourceAssembly(ResourceName, Assembly.GetExecutingAssembly());    SetName("FunctoidName");                     SetTooltip("FunctoidToolTip");    SetDescription("FunctoidDescription");    SetBitmap("FunctoidBitmap");    // Minimum and maximum parameters that the functoid accepts    this.SetMinParams(2);    this.SetMaxParams(2);    /// Function name that needs to be called when this Functoid is invoked.    /// Put this in GAC.    SetExternalFunctionName(GetType().Assembly.FullName,     "MyCompany.BizTalk.Functoids.TestFuntoids.TestFunctoids", "Execute");    // Category for this functoid.    this.Category = FunctoidCategory.String;    // Input and output Connection type    this.OutputConnectionType = ConnectionType.AllExceptRecord;    AddInputConnectionType(ConnectionType.AllExceptRecord);   } The "Execute" function provides a skeleton function that contains the code to be executed by your new functoid.  The inputs and outputs should match those you defined in the Custom Functoid Wizard.   public System.Int32 Execute(System.Int32 Cool)   {    ResourceManager resmgr = new ResourceManager(ResourceName, Assembly.GetExecutingAssembly());    try    {     // TODO: Implement Functoid Logic    }    catch (Exception e)    {     throw new Exception(resmgr.GetString("FunctoidException"), e);    }   } Opening the resource file you will see some of the various string values that you defined in the Custom Functoid Wizard - Name, Tooltip, Description and Exception. You can also select to look at the image resources.  This will display the embedded icon image for the functoid.  To change this right click the icon and select "Import from File". Once you have completed the skeleton code you can then look at trying out your functoid. To do this you will need to build the project, copy the compiled DLL to C:\Program Files\Microsoft BizTalk Server 2009\Developer Tools\Mapper Extensions and then refresh the toolbox in visual studio.

  Read the article

• WMemoryProfiler is Released

  - by Alois Kraus

  What is it? WMemoryProfiler is a managed profiling Api to aid integration testing. This free library can get managed heap statistics and memory usage for your own process (remember testing) and other processes as well. The best thing is that it does work from .NET 2.0 up to .NET 4.5 in x86 and x64. To make it more interesting it can attach to any running .NET process. The reason why I do mention this is that commercial profilers do support this functionality only for their professional editions. An normally only since .NET 4.0 since the profiling API only since then does support attaching to a running process. This thing does differ in many aspects from “normal” profilers because while profiling yourself you can get all objects from all managed heaps back as an object array. If you ever wanted to change the state of an object which does only exist a method local in another thread you can get your hands on it now … Enough theory. Show me some code /// <summary> /// Show feature to not only get statisics out of a process but also the newly allocated /// instances since the last call to MarkCurrentObjects. /// GetNewObjects does return the newly allocated objects as object array /// </summary> static void InstanceTracking() { using (var dumper = new MemoryDumper()) // if you have problems use to see the debugger windows true,true)) { dumper.MarkCurrentObjects(); Allocate(); ILookup<Type, object> newObjects = dumper.GetNewObjects() .ToLookup( x => x.GetType() ); Console.WriteLine("New Strings:"); foreach (var newStr in newObjects[typeof(string)] ) { Console.WriteLine("Str: {0}", newStr); } } } … New Strings: Str: qqd Str: String data: Str: String data: 0 Str: String data: 1 … This is really hot stuff. Not only you can get heap statistics but you can directly examine the new objects and make queries upon them. When I do find more time I can reconstruct the object root graph from it from my own process. It this cool or what? You can also peek into the Finalization Queue to check if you did accidentally forget to dispose a whole bunch of objects … /// <summary> /// .NET 4.0 or above only. Get all finalizable objects which are ready for finalization and have no other object roots anymore. /// </summary> static void NotYetFinalizedObjects() { using (var dumper = new MemoryDumper()) { object[] finalizable = dumper.GetObjectsReadyForFinalization(); Console.WriteLine("Currently {0} objects of types {1} are ready for finalization. Consider disposing them before.", finalizable.Length, String.Join(",", finalizable.ToLookup( x=> x.GetType() ) .Select( x=> x.Key.Name)) ); } } How does it work? The W of WMemoryProfiler is a good hint. It does employ Windbg and SOS dll to do the heavy lifting and concentrates on an easy to use Api which does hide completely Windbg. If you do not want to see Windbg you will never see it. In my experience the most complex thing is actually to download Windbg from the Windows 8 Stanalone SDK. This is described in the Readme and the exception you are greeted with if it is missing in much greater detail. So I will not go into this here.   What Next? Depending on the feedback I do get I can imagine some features which might be useful as well Calculate first order GC Roots from the actual object graph Identify global statics in Types in object graph Support read out of finalization queue of .NET 2.0 as well. Support Memory Dump analysis (again a feature only supported by commercial profilers in their professional editions if it is supported at all) Deserialize objects from a memory dump into a live process back (this would need some more investigation but it is doable) The last item needs some explanation. Why on earth would you want to do that? The basic idea is to store in your live process some logging/tracing data which can become quite big but since it is never written to it is very fast to generate. When your process crashes with a memory dump you could transfer this data structure back into a live viewer which can then nicely display your program state at the point it did crash. This is an advanced trouble shooting technique I have not seen anywhere yet but it could be quite useful. You can have here a look at the current feature list of WMemoryProfiler with some examples.   How To Get Started? First I would download the released source package (it is tiny). And compile the complete project. Then you can compile the Example project (it has this name) and uncomment in the main method the scenario you want to check out. If you are greeted with an exception it is time to install the Windows 8 Standalone SDK which is described in great detail in the exception text. Thats it for the first round. I have seen something more limited in the Java world some years ago (now I cannot find the link anymore) but anyway. Now we have something much better.

  Read the article

• SBS 2008 SP2 Backup - Volume Shadow Copy Operation Failed

  - by Robert Ortisi

  Server Setup Exchange 2007 Version: 08.03.0192.001 (Rollup 4) Windows Small Business Server 2008 SP2 (Rollup 5) Exchange set up on D: drive (449 GB / 698 GB Free) 80 GB / 148 GB Free on OS drive. Issue Backup Failure (VSS related) Backup Software Windows Server Backup (ver 1.0) Simplified Error Creation of the shared protection point timed out. Unknown error (0x81000101) The flush and hold writes operation on volume C: timed out while waiting for a release writes command. Volume Shadow Copy Warning: VSS spent 43 seconds trying to flush and hold the volume \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}. This might cause problems when other volumes in the shadow-copy set timeout waiting for the release-writes phase, and it can cause the shadow-copy creation to fail. Trying again when disk activity is lower may solve this problem. What I've tried Server Reboot. Updated Server and Exchange. ReConfigured Sharepoint (Helped resolve last vss error I encountered). registered VSS Dll's (Backups will sometimes work afterwards but VSS writers fail soon after). Tried Implementing Hotfix: http://support.microsoft.com/kb/956136 Tried Implementing Hotfix: http://support.microsoft.com/kb/972135 I left it for a few days and a few backups came through but then began to fail again. Detailed Information Log Name: Application Source: VSS Date: 16/11/2011 8:02:11 PM Event ID: 12341 Task Category: None Level: Warning Keywords: Classic User: N/A Computer: SERVER.DOMAIN.local Description: Volume Shadow Copy Warning: VSS spent 43 seconds trying to flush and hold the volume \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}. This might cause problems when other volumes in the shadow-copy set timeout waiting for the release-writes phase, and it can cause the shadow-copy creation to fail. Trying again when disk activity is lower may solve this problem. Operation: Executing Asynchronous Operation Context: Current State: flush-and-hold writes Volume Name: \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}\ Event Xml: 12341 3 0 0x80000000000000 1651049 Application SERVER.DOMAIN.local 43 \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}\ Operation: Executing Asynchronous Operation Context: Current State: flush-and-hold writes Volume Name: \?\Volume{b562a5dd-8246-11de-a75b-806e6f6e6963}\ ================================================================================= Log Name: System Source: volsnap Date: 16/11/2011 8:02:11 PM Event ID: 8 Task Category: None Level: Error Keywords: Classic User: N/A Computer: SERVER.DOMAIN.local Description: The flush and hold writes operation on volume C: timed out while waiting for a release writes command. Event Xml: 8 2 0 0x80000000000000 987135 System SERVER.DOMAIN.local ================================================================================== Log Name: Application Source: Microsoft-Windows-Backup Date: 16/11/2011 8:11:18 PM Event ID: 521 Task Category: None Level: Error Keywords: User: SYSTEM Computer: SERVER.DOMAIN.local Description: Backup started at '16/11/2011 9:00:35 AM' failed as Volume Shadow copy operation failed for backup volumes with following error code '2155348001'. Please rerun backup once issue is resolved. Event Xml: 521 0 2 0 0 0x8000000000000000 1651065 Application SERVER.DOMAIN.local 2011-11-16T09:00:35.446Z 2155348001 %%2155348001 ================================================================================== Writer name: 'FRS Writer' Writer Id: {d76f5a28-3092-4589-ba48-2958fb88ce29} Writer Instance Id: {ba047fc6-9ce8-44ba-b59f-f2f8c07708aa} State: [5] Waiting for completion Last error: No error Writer name: 'ASR Writer' Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4} Writer Instance Id: {0aace3e2-c840-4572-bf49-7fcc3fbcf56d} State: [1] Stable Last error: No error Writer name: 'Shadow Copy Optimization Writer' Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f} Writer Instance Id: {054593e2-2086-4480-92e5-30386509ed1b} State: [1] Stable Last error: No error Writer name: 'Registry Writer' Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485} Writer Instance Id: {840e6f5f-f35a-4b65-bb20-060cf2ee892a} State: [1] Stable Last error: No error Writer name: 'COM+ REGDB Writer' Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f} Writer Instance Id: {9486bedc-f6e8-424b-b563-8b849d51b1e1} State: [1] Stable Last error: No error Writer name: 'BITS Writer' Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0} Writer Instance Id: {29368bb3-e04b-4404-8fc9-e62dae18da91} State: [1] Stable Last error: No error Writer name: 'Dhcp Jet Writer' Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad} Writer Instance Id: {cfb58c78-9609-4133-8fc8-f66b0d25e12d} State: [5] Waiting for completion Last error: No error ==================================================================================

  Read the article

• SSL certificates and types for securing your websites and applications

  - by Mit Naik

  Need to share few information regarding SSL certificates and there types, which SSL certificates are widely used etc. There are several SSL certificates available in the market today inorder to secure your domains, multiple subdomains, your applications and code too. Few of the details are mentioned below. CheapSSL certificates available today are Standard Rapidssl certificate, Thwate SSL 123 etc certificates which are basic level certificates. Most of these cheap SSL certificates are domain-validated only and don't provide the greatest trust for your customers. This means you shouldn't use cheap SSL certificates on e-commerce stores or other public-facing sites that require people to trust the site. EV certificates I found Geotrust Truebusinessid with EV certificate which is one of the cheapest certificate available in market today, you can also find Thwate, Versign EV version of certificates. Its designed to prevent phishing attacks better than normal SSL certificates. What makes an EV Certificate so special? An SSL Certificate Provider has to do some extensive validation to give you one including: Verifying that your organization is legally registered and active, Verifying the address and phone number of your organization, Verifying that your organization has exclusive right to use the domain specified in the EV Certificate, Verifying that the person ordering the certificate has been authorized by the organization, Verifying that your organization is not on any government blacklists. SSL WILDCARD CERTIFICATES, SSL Wildcard Certificates are big money-savers. An SSL Wildcard Certificate allows you to secure an unlimited number of first-level sub-domains on a single domain name. For example, if you need to secure the following websites: * www.yourdomain.com * secure.yourdomain.com * product.yourdomain.com * info.yourdomain.com * download.yourdomain.com * anything.yourdomain.com and all of these websites are hosted on the multiple server box, you can purchase and install one Wildcard certificate issued to *.yourdomain.com to secure all these sites. SAN CERTIFICATES, are interesting certificates and are helpfull if you want to secure multiple domains by generating single CSR and can install the same certificate on your additional sites without generating new CSRs for all the additional domains. CODE SIGNING CERTIFICATES, A code signing certificate is a file containing a digital signature that can be used to sign executables and scripts in order to verify your identity and ensure that your code has not been tampered with since it was signed. This helps your users to determine whether your software can be trusted. Scroll to the chart below to compare cheap code signing certificates. A code signing certificate allows you to sign code using a private and public key system similar to how an SSL certificate secures a website. When you request a code signing certificate, a public/private key pair is generated. The certificate authority will then issue a code signing certificate that contains the public key. A certificate for code signing needs to be signed by a trusted certificate authority so that the operating system knows that your identity has been validated. You could still use the code signing certificate to sign and distribute malicious software but you will be held legally accountable for it. You can sign many different types of code. The most common types include Windows applications such as .exe, .cab, .dll, .ocx, and .xpi files (using an Authenticode certificate), Apple applications (using an Apple code signing certificate), Microsoft Office VBA objects and macros (using a VBA code signing certificate), .jar files (using a Java code signing certificate), .air or .airi files (using an Adobe AIR certificate), and Windows Vista drivers and other kernel-mode software (using a Vista code certificate). In reality, a code signing certificate can sign almost all types of code as long as you convert the certificate to the correct format first. Also I found the below URL which provides you good suggestion regarding purchasing best SSL certificates for securing your site, as per the Financial institution, Bank, Hosting providers, ISP, Retail Merchants etc. Please vote and provide comments or any additional suggestions regarding SSL certificates.

  Read the article

• Windows 7 Samba issue

  - by abduls85

  We have a strange samba issue affecting only one user. Our samba setup is as follow : Red Hat Enterprise Linux Server release 5.4 (Tikanga) - Samba Server Samba version 3.0.33-3.14.el5 - Samba version Domain Controller WIN2008R2 Standard - Windows DC Windows 7 64 bit - Client PCs User mentioned that he faced this problem after he force shutdown his PC few weeks ago. By right, for all users when we access \\sambaservername in windows it will show all the shares in the samba server but for this user once he startup his PC he will not be able to access \\sambaservername, Error message Windows cannot access \\sambaservername Current workaround to solve the problem : Try to access one share in \\sambaservername for instance \\sambaservername\sharedfolder1. But even when doing so, it will first prompt an error in the beginning, error message is as follows Logon failure: unknown user name or bad password. user need to enter the credentials again and he can access the share. Thereafter, he will be able to access \\sambaservername without any issues. But once he reboots his computer the problem will persists. Troubleshooting done so far: Ensure the following settings: Go to: Control Panel → Administrative Tools → Local Security Policy Select: Local Policies → Security Options "Network security: LAN Manager authentication level" → Send LM & NTLM responses "Minimum session security for NTLM SSP" → uncheck: Require 128-bit encryption Advise user to reset his password and try again but problem still persists Tried my account on users' PC, there is no issues. Tried user account on serveral other Windows 7 PC including mine but problem still persists. Windows XP does not have this problem. Ensure that there is no stored crendentials on the windows 7 PC. Checked the credentials manager in Control Panel as well as typing this command rundll32.exe keymgr.dll, KRShowKeyMgr Restart winbindd daemon on samba server but to no avail. I suspect this is due to some caching issue but not sure where is the issue. Whenever the user has error accessing \\sambaservername, the following errors will be logged in the samba server : [2012/10/10 17:10:26, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! [2012/10/10 17:10:27, 1] smbd/sesssetup.c:reply_spnego_kerberos(316) Failed to verify incoming ticket with error NT_STATUS_LOGON_FAILURE! But after workaround, there will be no more errors. I suspect after reading the article listed below some amendments need to be made to the \var\samba\cache directory : http://www.linuxquestions.org/questions/linux-server-73/getent-passwd-dont-show-ad-groups-and-users-745829/ http://www.samba.org/samba/docs/man/Samba-HOWTO-Collection/tdb.html http://lists.samba.org/archive/samba/2010-May/155521.html http://lists.samba.org/archive/samba/2011-March/161912.html http://lzeit.blogspot.sg/2009/10/samba-shares-inaccessible-after-power.html There are several users using the samba server and i would like to solve this problem without any impacts. I saw the following article : http://www.samba.org/samba/docs/man/manpages-3/smb.conf.5.html#WINBINDCACHETIME "winbind offline logon (G) This parameter is designed to control whether Winbind should allow to login with the pam_winbind module using Cached Credentials. If enabled, winbindd will store user credentials from successful logins encrypted in a local cache. Default: winbind offline logon = false Example: winbind offline logon = true " Any idea on how to delete the entry for one user in the local cache ?

  Read the article

• How can I switch an existing set of Subversion repositories to use ActiveDirectory?

  - by jpierson

  I have a set of private Subversion repositories on a Windows Server 2003 box which developers access via SVNServe over the svn:// protocol. Currently we have been using the authz and passwd files for each repository to control access however with the growing number of repositories and developers I'm considering switching to using their credentials from ActiveDirectory. We run in an all Microsoft shop and use IIS instead of Apache on all of our web servers so I would prefer to continue to use SVNServe if possible. Besides it being possible, I'm also concerned about how to migrate our repositories so that the history for the existing users map to the correct ActiveDirectory accounts. Keep in mind also that I'm not the network administrator and I'm not terrible familiar with ActiveDirectory so I'll probably have to go through some other people to get the changes made in ActiveDirectory if necessary. What are my options? UPDATE 1: It appears from the SVN documentation that by using SASL I should be able to get SVNServe to authenticate using ActiveDirectory. To clarify, the answer that I'm looking for is how to go about configuring SVNServe (if possible) to use ActiveDirectory for authentication and then how to modify an existing repository to remap existing svn users to their ActiveDirectory domain login accounts. UPDATE 2: It appears that the SASL support in SVNServe works off of a plugin model and the documentation only shows as an example. Looking at the Cyrus SASL Library it looks like a number of authentication "mechanisms" are supported but I'm not sure which one is to be used for ActiveDirectory support nor can I find any documentation about such matters. UPDATE 3: Ok, well it looks like in order to communication with ActiveDirectory I'm looking to use saslauthd instead of sasldb for the *auxprop_plugin* property. Unfortunately it appears that according to some posts (possibly outdated and inaccurate) saslauthd does not build on Windows and such endeavors are considered a work in progress. UPDATE 4: The lastest post I've found on this topic makes it sound as though the proper binaries () are available through the MIT Kerberos Library but it sounds like the author of this post on Nabble.com is still having issues getting things working. UPDATE 5: It looks like from the TortoiseSVN discussions and also this post on svn.haxx.se that even if saslgssapi.dll or whatever necessary binaries are available and configured on the Windows server that the clients will also need the same customization in order to work with these repositories. If this is true, we will only be able to get ActiveDirectory support from a windows client only if changes are made in these clients such as TortoiseSVN and CollabNet build of the client binaries to support such authentication schemes. Although thats what these posts suggest, this is contradictory from what I originally assumed from other reading in that being SASL compatible should require no changes on the client but instead only that the server be setup to handle the authentication mechanism. After reading a bit more carefully in the document about Cyrus SASL in Subversion section 5 states "1.5+ clients with Cyrus SASL support will be able to authenticate against 1.5+ servers with SASL enabled, provided at least one of the mechanisms supported by the server is also supported by the client." So clearly GSSAPI support (which I understand is required for Active Directory) must be available within the client and the server. I have to say, I'm learning way too much about the internals of how Subversion handles authentication than I ever wanted to and I juts simply want to get an answer about whether I can have Active Directory authentication support when using SVNServe on a Windows server and accessing this from Windows clients. According to the official documentation it seems that this is possible however you can see that the configuration is not trivial if even possible at all.

  Read the article

• How should I config Apache2.2?

  - by user1607641

  I tried to configure Apache 2.2.17 with PHP5.4 using this manual. But when I restarted my PC and went to http://localhost/phpinfo.php, I received this message: Not Found. The requested URL /phpinfo.php was not found on this server. Here is my httpd.conf - (full version with comments) and a copy with the comments stripped for brevity: ServerRoot "C:/Program Files/Apache2.2" #Listen 12.34.56.78:80 Listen 80 LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule cgi_module modules/mod_cgi.so LoadModule dir_module modules/mod_dir.so LoadModule env_module modules/mod_env.so LoadModule include_module modules/mod_include.so LoadModule isapi_module modules/mod_isapi.so LoadModule log_config_module modules/mod_log_config.so LoadModule mime_module modules/mod_mime.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule php5_module "C:/Languages/PHP/php5apache2_4.dll" # PHP AddHandler application/x-httpd-php .php PHPIniDir "C:/Languages/PHP" <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User daemon Group daemon </IfModule> </IfModule> ServerAdmin [email protected] #ServerName localhost:80 DocumentRoot "C:/Sites" <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/Sites"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.php index.html </IfModule> <FilesMatch "^\.ht"> Order allow,deny Deny from all Satisfy All </FilesMatch> ErrorLog "logs/error.log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "logs/access.log" common </IfModule> <IfModule alias_module> ScriptAlias /cgi-bin/ "C:/Program Files/Apache2.2/cgi-bin/" </IfModule> <IfModule cgid_module> #Scriptsock logs/cgisock </IfModule> <Directory "C:/Program Files/Apache2.2/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig conf/mime.types #AddType application/x-gzip .tgz #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz AddType application/x-compress .Z AddType application/x-gzip .gz .tgz #AddHandler cgi-script .cgi #AddHandler type-map var #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> #MIMEMagicFile conf/magic # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://localhost/subscription_info.html #MaxRanges unlimited #EnableMMAP off #EnableSendfile off # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Directory with sites is C:/Sites and PHP is located at C:/Languages/PHP.

  Read the article

• SNTP, why do you mock me?!

  - by Matthew

  --- SOLVED SEE EDIT 5 --- My w2k3 pdc is configured as an authoritative time server. Other servers on the domain are able to sync with it if I manually specify it in the peer list. By if I try to sync from flags 'domhier', it wont resync; I get the error message The computer did not resync because no time data was available. I can only think that it is not querying the pdc. I also tried setting the registry as shown here (http://support.microsoft.com/kb/193825). But no luck (I have not restarted the server, I am hoping I wont have to since it is the pdc) If you would like any further information on my config, please let me know. Edit 1: I have set the w32time service config AnnouceFlags to 0x05 as documented here www.krr.org/microsoft/authoritative_time_servers.php and a number of other places. The PDC syncs to an external time source (ntp). I can get the stripchart on the client from the pdc no problems. The loginserver for the host I am trying to configure is shown as the pdc. Edit 2: The packet capture has revealed something interesting. The client is contacting the correct server, and getting a valid response but I still get the same error message. Here is the NTP excerpt from the client to the server Flags: 11.. .... = Leap Indicator: alarm condition (clock not synchronized) (3) ..01 1... = Version number: NTP Version 3 (3) .... .011 = Mode: client (3) Peer Clock Stratum: unspecified or unavailable (0) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.015625 sec Root Delay: 0.0000 sec Root Dispersion: 1.0156 sec Reference Clock ID: NULL Reference Clock Update Time: Sep 1, 2010 05:29:39.8170 UTC Originate Time Stamp: NULL Receive Time Stamp: NULL Transmit Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Key ID: DC080000 Here is the reply NTP excerpt from the server to the client Flags: 0x1c 00.. .... = Leap Indicator: no warning (0) ..01 1... = Version number: NTP Version 3 (3) .... .100 = Mode: server (4) Peer Clock Stratum: secondary reference (3) Peer Polling Interval: 10 (1024 sec) Peer Clock Precision: 0.00001 sec Root Delay: 0.1484 sec Root Dispersion: 0.1060 sec Reference Clock ID: 192.189.54.17 Reference Clock Update Time: Nov 8,2010 01:18:04.6223 UTC Originate Time Stamp: Nov 8, 2010 01:44:44.1450 UTC Receive Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Transmit Time Stamp: Nov 8, 2010 01:46:44.1975 UTC Key ID: 00000000 Edit 3: dumpreg for paramters on pdc Value Name Value Type Value Data ------------------------------------------------------------------------ ServiceMain REG_SZ SvchostEntry_W32Time ServiceDll REG_EXPAND_SZ C:\WINDOWS\system32\w32time.dll NtpServer REG_SZ bhvmmgt01.domain.com,0x1 Type REG_SZ AllSync and config Value Name Value Type Value Data -------------------------------------------------------------------------- LastClockRate REG_DWORD 156249 MinClockRate REG_DWORD 155860 MaxClockRate REG_DWORD 156640 FrequencyCorrectRate REG_DWORD 4 PollAdjustFactor REG_DWORD 5 LargePhaseOffset REG_DWORD 50000000 SpikeWatchPeriod REG_DWORD 900 HoldPeriod REG_DWORD 5 LocalClockDispersion REG_DWORD 10 EventLogFlags REG_DWORD 2 PhaseCorrectRate REG_DWORD 7 MinPollInterval REG_DWORD 6 MaxPollInterval REG_DWORD 10 UpdateInterval REG_DWORD 100 MaxNegPhaseCorrection REG_DWORD -1 MaxPosPhaseCorrection REG_DWORD -1 AnnounceFlags REG_DWORD 5 MaxAllowedPhaseOffset REG_DWORD 300 FileLogSize REG_DWORD 10000000 FileLogName REG_SZ C:\Windows\Temp\w32time.log FileLogEntries REG_SZ 0-300 Edit 4: Here are some notables from the ntp log file on the pdc. ReadConfig: failed. Use default one 'TimeJumpAuditOffset'=0x00007080 DomainHierachy: we are now the domain root. ClockDispln: we're a reliable time service with no time source: LS: 0, TN: 864000000000, WAIT: 86400000 Edit 5: F&^%ING SOLVED! Ok so I was reading about people with similar problems, some mentioned w32time server settings applied by GPO, but I tested this early on and there were no settings applied to this service by gpo. Others said that the reporting software may not be picking up some old gpo settings applied. So I searched the registry for all w32time instaces. I came across an interesting key that indicated there may be some other ntp software running on the server. Sure enough, I look through the installed software list and there the little F*&%ER is. Uninstalled and now working like a dream. FFFFFFFUUUUUUUUUUUU

  Read the article

• Why Moq is thorwing "expected Invocation on the mock at least once". Where as it is being set once,e

  - by Mohit

  Following is the code. create a class lib add the ref to NUnit framework 2.5.3.9345 and Moq.dll 4.0.0.0 and paste the following code. Try running it on my machine it throws TestCase 'MoqTest.TryClassTest.IsMessageNotNull' failed: Moq.MockException : Expected invocation on the mock at least once, but was never performed: v = v.Model = It.Is(value(Moq.It+<c__DisplayClass21[MoqTest.GenInfo]).match) at Moq.Mock.ThrowVerifyException(IProxyCall expected, Expression expression, Times times, Int32 callCount) at Moq.Mock.VerifyCalls(Interceptor targetInterceptor, MethodCall expected, Expression expression, Times times) at Moq.Mock.VerifySet[T](Mock1 mock, Action1 setterExpression, Times times, String failMessage) at Moq.Mock1.VerifySet(Action`1 setterExpression) Class1.cs(22,0): at MoqTest.TryClassTest.IsMessageNotNull() using System; using System.Collections.Generic; using System.Linq; using System.Text; using Moq; using NUnit.Framework; namespace MoqTest { [TestFixture] public class TryClassTest { [Test] public void IsMessageNotNull() { var mockView = new Mock<IView<GenInfo>>(); mockView.Setup(v => v.ModuleId).Returns(""); TryPresenter tryPresenter = new TryPresenter(mockView.Object); tryPresenter.SetMessage(new object(), new EventArgs()); // mockView.VerifySet(v => v.Message, Times.AtLeastOnce()); mockView.VerifySet(v => v.Model = It.Is<GenInfo>(x => x != null)); } } public class TryPresenter { private IView<GenInfo> view; public TryPresenter(IView<GenInfo> view) { this.view = view; } public void SetMessage(object sender, EventArgs e) { this.view.Model = null; } } public class MyView : IView<GenInfo> { #region Implementation of IView<GenInfo> public string ModuleId { get; set; } public GenInfo Model { get; set; } #endregion } public interface IView<T> { string ModuleId { get; set; } T Model { get; set; } } public class GenInfo { public String Message { get; set; } } } And if you change one line mockView.VerifySet(v = v.Model = It.Is(x = x != null)); to mockView.VerifySet(v = v.Model, Times.AtLeastOnce()); it works fine. I think Exception is incorrect.

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >