Search Results

Search found 8048 results on 322 pages for 'partial upgrade'.

Page 188/322 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Mac OSX Server 10.6 DNS Issues

  - by dallasclark

  The server was upgraded from 10.5 from 10.6, during the upgrade the Reverse Zones were lost so I tried to recreate these but found that it's best to delete all zones, definitions and start again. So I've started again and Reverse Zones are appearing but I'm still having issues. I receive the following errors (if they help) 01-Nov-2010 12:52:01.254 client 192.168.1.52#57051: view com.apple.ServerAdmin.DNS.public: query (cache) 'server.dev.home.gateway/A/IN' denied 01-Nov-2010 12:59:24.487 client 192.168.1.52#52858: view com.apple.ServerAdmin.DNS.public: query (cache) 'earth.server.dev.home.gateway/A/IN' denied At the moment I have the following setup in the DNS 1.168.192.in-addr.arpa. Reverse Zone 192.168.1.100 Reverse Mapping MacPro-Server.local. server.dev. Primary Zone server.dev. Machine 192.168.1.100 earth.server.dev. Alias server.dev.

  Read the article

• How to retrieve combobox selection in a windows form

  - by Edward Leno

  All, I have a simple windows form with a combobox and a 'OK' button. After clicking the 'OK' button, I want to retrieve the selected combobox value. The GetUserForm has 2 controls: combobox named cmbUser, with a list of 2 values button named btnOK Nothing has been done to the GetUserForm class itself. The class contains: public partial class GetUserForm : Form { public STAMP_GetUser() { InitializeComponent(); } } GetUserForm f = new GetUserForm(); f.ShowDialog(); // not sure how to access the combobox selected value? Do I need to initialize something in the class? Or can I access the controls on the form using the 'f' variable above?

  Read the article

• Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

  - by vocoder

  I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

  Read the article

• Rails Custom Plugin/Gem with Partials

  - by Jason

  I am writing a gem which provides helpers for views. The HTML I want to insert via the helper is complex enough that I'd rather write it in a _partial.html.erb file. How do I get the gem's view path include in the application's load_path? Note: the only gem I've found that does something like this is Devise. When a view cannot be found, Rails prints the load path which (on my machine) looks like: Missing partial sortable_nested_set/tree with {:handlers=>[:erb, :rjs, :builder, :rhtml, :rxml], :formats=>[:html], :locale=>[:en, :en]} in view paths "/home/jason/VirtualRestaurant3/app/views", "/home/jason/.rvm/gems/ruby-1.9.2-preview3/gems/devise-1.1.rc0/app/views" How does Devise do it? My gem: http://github.com/jrmurad/SortableNestedSet Devise gem: +http://+github.com/plataformatec/devise

  Read the article

• html.checkbox - explicit value to hidden field value

  - by Tassadaque

  Hi I am creating list of checkboxes in partial view by follwoing http://blog.stevensanderson.com/2010/01/28/editing-a-variable-length-list-aspnet-mvc-2-style/ code and Rendered HTML for checkboxes is as follows <%=Html.CheckBox("EmployeeID", new { value = user.EmployeeID, @class = "ccboxes", title = user.Designation + "(" + user.EmployeeName + ")" })%> <INPUT id=MemoUsers_a29f82e4-ebbc-47b0-8cdd-7d54f94143be__EmployeeID class=boxes title=Programmer(Zia) value=6 type=checkbox name=MemoUsers[a29f82e4-ebbc-47b0-8cdd-7d54f94143be].EmployeeID jQuery1276681299292="27"> <INPUT value=false type=hidden name=MemoUsers[a29f82e4-ebbc-47b0-8cdd-7d54f94143be].EmployeeID> In rendered html it can be seen that value attribute of hidden field is false. i want to assign explicit value(same as checkbox value) to this value. Is this possible using html.checkbox or html.checkboxfor. one way is recommended in http://stackoverflow.com/questions/626901/asp-net-mvc-rc2-checkboxes-with-explicit-values. Is there any other better way i want to do this as ModelState.IsValid is returning false because of hidden field value attribute Regards

  Read the article

• How can I resume downloads in Perl?

  - by Neeraj

  I have a project that depends upon some other binaries to be downloaded from web at install time.For this what i do is: if ( file-present-in-src/) # skip that file else # use wget to download the file The problem with this approach is that when I interrupt a download in middle, and do invoke the script next time, the partially downloaded file is also skipped (which is not desired), also I want wget to resume the download of the partially downloaded file. How should I go about it: Possible Solutions I could think of: Let the file to be downloaded to some file say download_tmp. Move to original file if successful. Handle SIG{'INT'} to write proper cleanup code. But none of these could help resume the partial file download, Any insights?

  Read the article

• Storing ASP.Net MVC Views in the Database

  - by Adam Albrecht

  For an ASP.Net MVC application, I'm interested in storing some views and/or partial views in the database so that a few semi-technical users can do some basic view logic. Does anyone have any tips or lessons from experience on doing this? I know Phil Haack wrote a blog post on this about a year ago. He used IronRuby for scripting his views, (which would be fine for me). He created a quick proof-of-concept, but I can't find any other information on the topic. Any ideas, thoughts, tips, etc would be appreciated. Thanks!

  Read the article

• Windows 7 installation asks for DVD drivers

  - by koen

  I have installed Windows XP on my machine (Company CQ5020NL). Before I was able to do that, I set the SATA controller to IDE in the bios. Now I want to install Windows 7 upgrade. The DVD boots into the installation setup, but when I click "Install now" and am asked to load "A required CD/DVD drive device". When I click "Browse" I can browse the installation dvd and the drive I want to install to. I have tried all the SATA options in the bios already. I have no idea what to do... can anybody help me out?

  Read the article

• Server 2003 - Default installation of SharePoint throws javascript error 'undefined' is null or not an object

  - by Chris

  I have been handed a server that has a fresh installation of small business server 2003. SharePoint has been installed, and it is a completely fresh copy (no changes made) I know for a fact that everything was paid for so this isn't some dodgy copy. When I try to click any option in any of the floating menu's in IE 8, the browser asks me if I want to debug .. Error: 'undefined' is null or not an object for example, I got to Projects - and click on the sample project, then click delete on the floating menu that pops up and the error appears. This is brand new, I cannot believe I am having this problem! Has anyone come across this, is it an old problem with easy fix? All windows updates installed - see no updates for sharepoint? EDIT: This is WSS2 so I am going to upgrade to WSS3... http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14117 http://www.techrepublic.com/article/installing-windows-sharepoint-services-30-on-windows-server-2003/6176833 Hopefully this will resolve the problem

  Read the article

• ASP User Control Issue

  - by Steven

  I am attempting to construct my own date picker using code from several sources. Why won't the calendar hide when visible? myDate.ascx <%@ Control Language="vb" AutoEventWireup="false" CodeBehind="myDate.ascx.vb" Inherits="Website.myDate" %> <asp:TextBox ID="dateText" runat="server" > </asp:TextBox> <asp:Button ID="dateBtn" runat="server" UseSubmitBehavior="false" Text="x" /> <asp:Calendar ID="dateCal" runat="server" ></asp:Calendar> myDate.ascx.vb Partial Public Class myDate Inherits System.Web.UI.UserControl Protected Sub dateCal_SelectionChanged(ByVal sender As Object, ByVal e As EventArgs) Handles dateCal.SelectionChanged dateText.Text = dateCal.SelectedDate ' Update text box' dateCal.Visible = False ' Hide calendar' End Sub Protected Sub dateCal_VisibleMonthChanged(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.MonthChangedEventArgs) Handles dateCal.VisibleMonthChanged dateCal.Visible = True ' For some reason, changing the month hides the calendar (so show it)' End Sub Private Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load dateCal.Visible = False ' Hide calendar on load' End Sub Protected Sub dateBtn_Click(ByVal sender As Object, ByVal e As EventArgs) Handles dateBtn.Click dateCal.Visible = Not dateCal.Visible ' On button press, toggle visibility' End Sub End Class

  Read the article

• DataReceived Event handler not receiving messages using c#

  - by karthik

  I'm using the below code to receive the messages using serial port event handler. But it dosent receives any.I am not getting errors. The code breaks in "string msg = comport.Readline()" Am i doing something wrong ? public partial class SerialPortScanner : Form { private SerialPort comPort = new SerialPort(); public SerialPortScanner() { InitializeComponent(); comPort.Open(); comPort.DataReceived += new SerialDataReceivedEventHandler(comPort_DataReceived); } void comPort_DataReceived(object sender, SerialDataReceivedEventArgs e) { if (comPort.IsOpen == true) { string msg = comPort.ReadLine(); MessageBox.Show(msg); } } }

  Read the article

• What's the difference between these Intel things?

  - by Coldblackice

  My head still spins with the various Intel "things" that may (or may not) need installing/configuring/yaddayadda'ing: Intel Rapid Storage Technology (is this driver? a software manager/package?), Intel Chipset (i.e., Intel INF Update Utility, Intel RST OROM, Intel RST driver, Intel Matrix Manager, etc. I think I have a basic understanding that the OROM is the low-level BIOS "driver", which communicates with the higher-level RST driver (in Windows). But what's the Chipset Installation software? What's the INF installation/update software? I'm confused as to what the other pieces are (or why there are so many to begin with). And as for a practical matter -- I'm wanting to upgrade my BIOS with a recent Intel OROM included, and then also update the Intel RST drivers in Windows -- BUT, as for the Windows side of things, I don't know what I should uninstall -- the Intel Chipset installer thing (through official uninstaller), Intel RST Manager, finding the individual Intel devices in Device Manager and right-clicking-uninstall/deleting, etc.

  Read the article

• TrueCrypt & upgrading your hard drive?

  - by Danielb

  I currently use TrueCrypt to encrypt the hard drive in a Win7 laptop (everything in a single partition). I am looking to upgrade the hard drive to a model with significantly more storage capacity. I've had a look through the documentation but I couldn't see anything about this particular scenario. I assume I need to do something like the following: Remove the encryption from the existing drive. Clone the existing drive image onto the new hard drive. Physically install the new drive into the laptop. Resize the single partition to use all the space in the new drive. Encrypt all of the new bigger drive with TrueCrypt.

  Read the article

• Using "enterprise" switches in home network?

  - by Industrial

  Hi everyone, After more than 12 years working with computers, I am still way behind when it comes to networking, so please bear with me :) As of this Christmas, the number of computers in my home has increased and it's well about time to upgrade the current network hardware in order to offer LAN connection to all computers. Trying to find a cheap solution, A close friend offered me a great deal on a "enterprise-class" Switch from HP (more LAN ports than I would ever need), at the same price as what a brand new Netgear or D-link Switch with 6/8 ports would cost me in retail. Would it be common sense to get this one and start using it immediately and never again have to worry about running out of LAN connections, or am I taking on a bigger bite than what I could chew?

  Read the article

• How to reset password for Dell PowerConnect 2708?

  - by oherrala

  I do as the user manual says and press "Managed Mode" button to get into unmanaged mode and then press "Managed Mode" button again for managed mode. This should reset the device to factory defaults and username "Admin" with no password. However, the device resets (I think) and I can access the web console from IP 192.168.2.1, but the username and password doesn't work. Maybe the device doesn't reset after all. Or the username/password has been changed in some firmware upgrade? What should I do to get into management of this switch?

  Read the article

• Ubuntu One Folder Sync Filter

  - by Andy Barlow

  Hi, I am trying to modify the Ubuntu One File syncing python scripts to not including things like .iso's. I have got as far as finding this file: /usr/share/pyshared/ubuntuone/u1sync/constants.py Inside is this piece of code: import re # the name of the directory u1sync uses to keep metadata about a mirror METADATA_DIR_NAME = u".ubuntuone-sync" # filenames to ignore SPECIAL_FILE_RE = re.compile(".*\\.(" "(u1)?partial|part|" "(u1)?conflict(\\.[0-9]+)?)$") How can I edit this last section (regex?) and make it ignore .iso files??? I'm fairly sure this is the place to put it! Pretty sure this is standard python action :) Any help would be appreciated. Thanks kindly. Andy

  Read the article

• Getting config element from ConfigurationElementCollection

  - by Martin

  I have (hopefully) setup ConfigurationElementCollection of my own design with emails as keys. Now what? Hard to find actually on the web. How do I: iterate through it? See if a specific element exists? get a specific element? ...given: YourConfigElement config = ConfigurationManager.GetSection("YourSectionName") as YourConfigElement ; Partial answer Does this work? no, sadly. foreach (X x in config.XCollection.AsQueryable()) ...

  Read the article

• internal compiler error

  - by hyperboreean

  I am getting this message: internal compiler error: Segmentation fault Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.4/README.Bugs> for instructions. for every compilation that takes longer (ie: linux kernel, kde sources etc.) I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?

  Read the article

• ASUS EAH4670 vs. ASUS EAH4670 V2 -- Whats the difference?

  - by roosteronacid

  I've been offered to buy a used ASUS EAH4670/DI/1GD3 graphics card. I went price-scouting to see if the offer I was given was fair, and I found out that there's a similar card, labelled ASUS EAH4670/DI/1GD3 V2. Question is; What's the difference? What's with the V2? What does it mean? Is it just a BIOS upgrade that I can do myself? Updated driver-software which I can download myself? Or is the card actually a better version--faster, more reliable (physical changes to the print), etc.?

  Read the article

• CentOS connect to the internet

  - by Delirium tremens

  I installed CentOS, but it didn't automatically connect to the internet. Is that the normal behavior? I have Ethernet Broadband Router DI-604 and WebStar DPX2203 series Cablemodem with EMTA . What should I do to connect to the internet? Update: A cousin told me my ethernet adapter or network board will depend on my motherboard. My computer upgrade document says the motherboard is gigabyte video onboard. I heard gigabyte's network adapters are Gigabit or Realtek. In CentOS, System - Administration - Network - New - Ethernet, first, only "Other Network Board" was listed, so I selected it and clicked Next, then there wasn't Gigabit, but there was Realtek, so I selected Realtek. I heard with Net Virtua selecting dhcp the things first answered asked me to tell first answerer are automatically configured. So I tried Realtek with dhcp, but it still didn't work.

  Read the article

• Error when reinstalling apache2

  - by ProfGhost

  I did an dist-upgrade on Debian Wheezy yesterday and got an error with syslog-nc-core. I found that i should try to reinstall it and tried but it ended with an error that apache2 isnt configured. I purged it also and when i now try to reinstall i get the error Setting up apache2 (2.4.10-1) ... Directory /etc/apache2/conf.d is not empty - leaving as is Please note, that directory is considered obsolete and not read anymore by default zz010_psa_httpd.conf ERROR: Config file dir.conf not properly enabled: /etc/apache2/mods-enabled/dir.conf is a real file, not touching it dpkg: error processing package apache2 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: apache2 E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Apache file negotiation failed

  - by lorenzo.marcon

  I'm having the following issue on a host using Apache 2.2.22 + PHP 5.4.0 I need to provide the file /home/server1/htdocs/admin/contents.php when a user makes the request: http://server1/admin/contents, but I obtain this message on the server error_log. Negotiation: discovered file(s) matching request: /home/server1/htdocs/admin/contents (None could be negotiated) Notice that I have mod_negotiation enabled and MultiViews among the options for the related virtualhost: <Directory "/home/server1/htdocs"> Options Indexes Includes FollowSymLinks MultiViews Order allow,deny Allow from all AllowOverride All </Directory> I also use mod_rewrite, with the following .htaccess rules: RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([^\./]*)$ index.php?t=$1 [L] </IfModule> It seems very strange, but on the same box with PHP 5.3.6 it used to work correctly. I'm just trying an upgrade to PHP 5.4.0, but I cannot solve this negotiation issue. Any idea on why Apache cannot match contents.php when asking for content (which should be what mod_negotiation is supposed to do)?

  Read the article

• cannot install new drivers for ATI Radeon HD mobility

  - by mugetsu

  I have an ATI mobility Radeon HD 3200 graphics card with a driver that I downloaded from my computer manufacturer's site. I wanted to upgrade the driver so I downloaded the respective driver from ATI and ran the installation. However, the installation only installs the download manager, the App SDK, C++ distributables and CCC, no display driver. When I try opening the CCC, I get an error that quits the CCC, something about the display driver not being recognized. What is wrong here? How do I go about fixing this? thanks

  Read the article

• Can anyone give me a sample DSP script in C/C++

  - by Andrew

  Im working on a (Audio) DSP project and just wondering if there are any sample (Open source) DSP example that are written in c or c++, for my MSP430 Chip. I just want something as a guideline so i can program my own script using the ACD and DCA on my board for sampling. http://focus.ti.com/docs/toolsw/folders/print/msp-exp430f5438.html Thats my board, MSP430F5438 Experimenter Board, from what i herd it can run dsp script via the USB connection with the computer. Im using CCS ( From TI, code composer studio) and Octave/Matlab. Just any DSP example scripts or sites that will help me create my own would be appreciated. What im tying to do, Partial audio (sampled) track -- Nyquist rate sampling -- over- and undersampling -- reconstruction of the audio track.

  Read the article

• My ASP.NET Web Application cannot 'find' any of my classes in the App_Code folder .. ??

  - by Pure.Krome

  Hi folks, I'm trying to make a new asp.net web application .. so I'm copying my files from one site to the new one, in the same solution. Now, any of my classes in the App_Code directory ... they are not getting 'picked up' by the rest of my project. For example... \_ \_App_Code |_ BaseMasterPage.cs (please don't ask why this is in here..) |_ Utility.cs |_ FooBar.cs \_MasterPages |_ Default.master.cs // This file errors ;( namespace Foo.WebSite.MasterPages { public partial class Default_master : App_Code.BaseMasterPage { ... } } namespace Foo.WebSite.App_Code { public class BaseMasterPage : MasterPage { .. } } It cannot find the App_Code.BaseMasterPage (compilation and intellisence error) in the Default.master.cs page. Can someone please help? this is killing me :(

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >