Search Results

Search found 18911 results on 757 pages for 'device manager'.

Page 189/757 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

  • Unable to mount external hard drive - Damaged file system and MFT

    - by Khalifa Abbas Lame
    I get the following error when i try to mount my external hard drive. UNABLE TO MOUNT Error mounting /dev/sdc1 at /media/khalibloo/Khalibloo2: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/media/khalibloo/Khalibloo2"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read of MFT, mft=6 count=1 br=-1: Input/output error Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdc1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It doesn't mount on windows either: "I/O Device error" it's an ntfs hard drive with a single partition Of course, i tried chkdsk /f. it reported several file segments as unreadable, but didn't say whether it fixed them or not (apparently not). also tried with the /b flag. ntfsfix reported the volume as corrupt. TestDisk was able to fix a small error with the partition table by adding the "80" flag for the active (only) partition. TestDisk also confirmed that the boot sector was fine and it matched the backup. However, when attempting to repair the MFT, it couldn't read the MFT. It also couldn't list the files on the hard drive. It says file system may be damaged. Active@ also shows that MFT is missing or corrupt. So how do i fix the file system? or the MFT?

    Read the article

  • CodePlex Daily Summary for Saturday, November 10, 2012

    CodePlex Daily Summary for Saturday, November 10, 2012Popular ReleasesImageGlass: Version 1.5: http://i1214.photobucket.com/albums/cc483/phapsuxeko/ImageGlass/1.png v1.5.4401.3015 Thumbnail bar: Increase loading speed Thumbnail image with ratio Support personal customization: mouse up, mouse down, mouse hover, selected item... Scroll to show all items Image viewer Zoom by scroll, or selected rectangle Speed up loading Zoom to cursor point New background design and customization and others... v1.5.4430.483 Thumbnail bar: Auto move scroll bar to selected image Show / Hi...Building Windows 8 Apps with C# and XAML: Full Source Chapters 1 - 10 for Windows 8 Fix 002: This is the full source from all chapters of the book, compiled and tested on Windows 8 RTM. Includes: A fix for the Netflix example from Chapter 6 that was missing a service reference A fix for the ImageHelper issue (images were not being saved) - this was due to the buffer being inadequate and required streaming the writeable bitmap to a buffer first before encoding and savingmyCollections: Version 2.3.2.0: New in this version : Added TheGamesDB.net API for Games and NDS Added Support for Windows Media Center Added Support for myMovies Added Support for XBMC Added Support for Dune HD Added Support for Mede8er Added Support for WD HDTV Added Fast search options Added order by Artist/Album for music You can now create covers and background for games You can now update your ID3 tag with the info of myCollections Fixed several provider Performance improvement New Splash ...Draw: Draw 1.0: Drawing PadPdfReport: PdfReport 1.4: - Added Html Footer Template. - Added a new HeaderTemplate (HtmlHeader) to simplify creating the headers of pages and groups by using HTML. See HtmlHeader/HtmlHeaderPdfReport.cs sample for more info. - Added a new sample (HtmlCellTemplate/HtmlCellTemplatePdfReport.cs) to show how to use the HtmlField template for creating the custom cell templates. - Added transparency setting to DiagonalWatermark. See ProgressReportPdfReport for more info. - Added DynamicCompile/DynamicCompilePdfReport.cs sa...Player Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...Umbraco CMS: Umbraco 4.10.0: NugetNuGet BlogRead the release blog post for 4.10.0. Whats newMVC support New request pipeline Many, many bugfixes (see the issue tracker for a complete list) Read the documentation for the MVC bits. Breaking changesWe have done all we can not to break backwards compatibility, but we had to do some minor breaking changes: Removed graphicHeadlineFormat config setting from umbracoSettings.config (an old relic from the 3.x days) U4-690 DynamicNode ChildrenAsList was fixed, altering it'...MySQL Tuner for Windows: 0.3: Welcome to the third beta of MySQL Tuner for Windows! This release fixes bugs in the displaying of numbers, and a crash that occurred due to the program incorrectly closing and disposing of resources, Be warned that there will be bugs in this release, so please do not use on production or critical systems. Do post details of issues found to the issue tracker, and I will endeavour to fix them, when I can. I would love to have your feedback, and if possible your support! Requirements Microso...SharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.D3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...MFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeJayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.3: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.3 For detailed release notes check the release notes. TypeScript supportWrite your code in a ...MCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesWindow Manager: Window Manager 1.0: First releaseProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...New ProjectsAuthor-it Variables Report Plug-in: The Variable Information Plug-in is an Author-it plug-in that displays information about all the variables in a library.bobthebuilder: Bob the builderCalendarSite: This webapplicaton is a calendar and appoinement manager app.ControlIP: This project helps users make the control task in a projectDaily Math Training: Daily Math Training app is Windows 8 app for children.Diablo III: This Project will contain several Diablo III related Implementations (a Windows 8 App another API Implementation, maybe some Calculators...)gelform: Ejercicio UTNJHashWin: Calcular hash MD5 SHA1 SHA256 SHA512 de arquivos MultiTask .NET 4.0 C# Marron TFS: Marron TFSMiddle Tennessee State University Robotics Team: Home of the MTSU Raider Robotics team.myexam: examN2F Router: The Zibings, N2Framework, url mapping/router project.NZBMatrix Advanced Feed Reader: This project is simple filter for NZBMatrix website feeds to update user with new movies which falls into the predefined customizable search templates.OpenTrading: Projeto em VB .net 3.5 que utiliza Active Record para mapeamento do banco de dados diretamente na classe das entidades e NHibernate para persistência dos dadosProjeto Parque - PI: Este projeto é resultado de um trabalho que realizamos todos os semestres na faculdade. 4º BSI - Centro Universitário Senac. QuesSys: this project is about examinationsample of inheritance: this project a sample of inheritance between classes at C#SharePoint 2013 Search Query Tool: Tool to test and debug the Search REST API in SharePoint 2013. Issue GET and POST search and suggestions queries. Use also against SharePoint Online. SharePoint Metro Grid: SharePoint 2010/2013 web part that displays links in Metro Tile Grid format. Just like Windows 8. Includes 215 images in 7 different sizes. Or use your own.SQL Server Partitioned Table Framework: The SQL Server Partitioned Table Framework (PTF) consists of a set of T-SQL Procedures that ease the maintenance work associated with partitioned tables.String -By GigaPlux Inc.: String OS is a operating system that was developed using C# and is based on the cosmos project .It has a beautiful File System by GRUNT.svu cms: first cms with chat and message between user vConsole for Windows 8: Just a very simple little app to help IT folks stuck in vSphere 5.0 with Win 8 console issues until you get to the next version of vSphereWikiprep#: The Wikiprep program is completely written in C# and based on .Net 4.0 . It processes Wikipedia dumps.Windows 8 Lock Screen: Windows 8 Lock Screen is a app that works like the Windows 8 Lock Screenwsccproject: updates will be made in due time during development

    Read the article

  • Chrome window controls in xubuntu 12.04

    - by Norbert
    I'm a long time ubuntu 10.04 LTS user, very used to having window controls on top left borders. New computer with new video card requires newer kernel. Unity doesn't suit and much googling turned up recommendations for xubuntu. Installed 12.04 and first aggravation is window controls at upper right a la Windows. No problem ... Settings Manager - Windows Manager - rearrange button layout Fixes everything until ... I abandoned firefox long ago because of memory leak issues and general fat. I fetch a current version of chrome (19.0.1084.52) and install. Once adblock is added and it's the default browser, everything's great. Except ... Alone among all applications, chrome will not honour the window manager's preferred button layout. Buttons are at upper right no matter what I try. Uninstall and then reinstall: nope. Trawl through /home/user/.config/google-chrome/* looking for a likely setting: nope. Search the web: nothing useful. How do I get chrome's window decoration in sync? Thanks very much for any and all help.

    Read the article

  • Error instantiating Texture2D in MonoGame for Windows 8 Metro Apps

    - by JimmyBoh
    I have an game which builds for WindowsGL and Windows8. The WindowsGL works fine, but the Windows8 build throws an error when trying to instantiate a new Texture2D. The Code: var texture = new Texture2D(CurrentGame.SpriteBatch.GraphicsDevice, width, 1); // Error thrown here... texture.setData(FunctionThatReturnsColors()); You can find the rest of the code on Github. The Error: SharpDX.SharpDXException was unhandled by user code HResult=-2147024809 Message=HRESULT: [0x80070057], Module: [Unknown], ApiCode: [Unknown/Unknown], Message: The parameter is incorrect. Source=SharpDX StackTrace: at SharpDX.Result.CheckError() at SharpDX.Direct3D11.Device.CreateTexture2D(Texture2DDescription& descRef, DataBox[] initialDataRef, Texture2D texture2DOut) at SharpDX.Direct3D11.Texture2D..ctor(Device device, Texture2DDescription description) at Microsoft.Xna.Framework.Graphics.Texture2D..ctor(GraphicsDevice graphicsDevice, Int32 width, Int32 height, Boolean mipmap, SurfaceFormat format, Boolean renderTarget) at Microsoft.Xna.Framework.Graphics.Texture2D..ctor(GraphicsDevice graphicsDevice, Int32 width, Int32 height) at BrewmasterEngine.Graphics.Content.Gradient.CreateHorizontal(Int32 width, Color left, Color right) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Graphics\Content\Gradient.cs:line 16 at SampleGame.Menu.Widgets.GradientBackground.UpdateBounds(Object sender, EventArgs args) in c:\Projects\Personal\GitHub\BrewmasterEngine\SampleGame\Menu\Widgets\GradientBackground.cs:line 39 at SampleGame.Menu.Widgets.GradientBackground..ctor(Color start, Color stop, Int32 scrollamount, Single scrollspeed, Boolean horizontal) in c:\Projects\Personal\GitHub\BrewmasterEngine\SampleGame\Menu\Widgets\GradientBackground.cs:line 25 at SampleGame.Scenes.IntroScene.Load(Action done) in c:\Projects\Personal\GitHub\BrewmasterEngine\SampleGame\Scenes\IntroScene.cs:line 23 at BrewmasterEngine.Scenes.Scene.LoadScene(Action`1 callback) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Scenes\Scene.cs:line 89 at BrewmasterEngine.Scenes.SceneManager.Load(String sceneName, Action`1 callback) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Scenes\SceneManager.cs:line 69 at BrewmasterEngine.Scenes.SceneManager.LoadDefaultScene(Action`1 callback) in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Scenes\SceneManager.cs:line 83 at BrewmasterEngine.Framework.Game2D.LoadContent() in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Framework\Game2D.cs:line 117 at Microsoft.Xna.Framework.Game.Initialize() at BrewmasterEngine.Framework.Game2D.Initialize() in c:\Projects\Personal\GitHub\BrewmasterEngine\BrewmasterEngine\Framework\Game2D.cs:line 105 at Microsoft.Xna.Framework.Game.DoInitialize() at Microsoft.Xna.Framework.Game.Run(GameRunBehavior runBehavior) at Microsoft.Xna.Framework.Game.Run() at Microsoft.Xna.Framework.MetroFrameworkView`1.Run() InnerException: Is this an error that needs to be solved in MonoGame, or is there something that I need to do differently in my engine and game?

    Read the article

  • Nvidia dual monitor configuration gets lost every time I reboot

    - by sunwukung
    I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

    Read the article

  • XNA, how to draw two cubes standing in line parallelly?

    - by user3535716
    I just got a problem with drawing two 3D cubes standing in line. In my code, I made a cube class, and in the game1 class, I built two cubes, A on the right side, B on the left side. I also setup an FPS camera in the 3D world. The problem is if I draw cube B first(Blue), and move the camera to the left side to cube B, A(Red) is still standing in front of B, which is apparently wrong. I guess some pics can make much sense. Then, I move the camera to the other side, the situation is like: This is wrong.... From this view, the red cube, A should be behind the blue one, B.... Could somebody give me help please? This is the draw in the Cube class Matrix center = Matrix.CreateTranslation( new Vector3(-0.5f, -0.5f, -0.5f)); Matrix scale = Matrix.CreateScale(0.5f); Matrix translate = Matrix.CreateTranslation(location); effect.World = center * scale * translate; effect.View = camera.View; effect.Projection = camera.Projection; foreach (EffectPass pass in effect.CurrentTechnique.Passes) { pass.Apply(); device.SetVertexBuffer(cubeBuffer); RasterizerState rs = new RasterizerState(); rs.CullMode = CullMode.None; rs.FillMode = FillMode.Solid; device.RasterizerState = rs; device.DrawPrimitives( PrimitiveType.TriangleList, 0, cubeBuffer.VertexCount / 3); } This is the Draw method in game1 A.Draw(camera, effect); B.Draw(camera, effect); **

    Read the article

  • Introducing a (new) test method to a team

    - by Jon List
    A couple of months ago i was hired in a new job. (I'm fresh out of my Masters in software engineering) The company mainly consists of ERP consultants, but I was hired in their fairly small web department (6 developers), our main task is ERP/ecom integration (ERP-integrated web shops). The department is growing, and recently my manager asked me to start thinking about introducing tests to the team, i love a challenge, but frankly I'm a bit scared (I'm the least experience member of the team). Currently the method of testing is clicking around in the web shop and asking the customer if the products are there, if they look okay, and if orders are posted correctly to the ERP. We are getting a lot of support cases on previous projects, where a customer or a customer's customer have run into errors, which - i suppose - is why my manager wants more structured testing. Off the top of my head, I though of some (obvious?) improvements, like looking at the requirement specification, having an issue tracker, enabling team members to register their time on a "tests"-line on the budget, and to circulate tasks amongst members of the team. But as i see it we have three main challenges: general website testing. (javascript, C#, ASP.NET and CMS integration tests) (live) ERP integration testing (customers rarely want to pay for test environments). adopting a method in the team I like the responsibility, but I am afraid that I'm in a little bit over my head. I expect that my manager expects me to set up some kind of workshop for the team where I present some techniques and ideas and where we(the team) can find some solutions together. What I learned in school was mostly unit testing and program verification, not so much testing across multiple systems and applications. What I'm looking for here, is references/advice/pointers/anecdotes; anything that might help me to get smarter and to improve the current method of my team. Thanks!! (TL;DR: read the bold parts)

    Read the article

  • Intel graphic chipset and NVIDIA Geforce GTX560

    - by antoine
    I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

    Read the article

  • Ubuntu installer does not show drives

    - by Tanweer Rashid
    I am trying to install Ubuntu 12.04 LTS on my Inspiron laptio, but the installer does not show any drives. My system has a 1TB SATA drive and a 32GB SSD. As far as I can figure, the boot files are kept on the SSD for fast startup (for Windows). During Win7 installation, I had to manually load drivers for RAID controller to see all available drives. Running fdisk -l from the live CD shows the following: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b4782 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 81920 41627647 20772864 7 HPFS/NTFS/exFAT /dev/sda3 41627648 357019647 157696000 7 HPFS/NTFS/exFAT /dev/sda4 357019648 1953517567 798248960 f W95 Ext'd (LBA) /dev/sda5 672415744 1312966655 320275456 7 HPFS/NTFS/exFAT /dev/sda6 1312968704 1953517567 320274432 7 HPFS/NTFS/exFAT Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x234b474b Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive ubuntu@ubuntu:~$ In the Ubuntu installer, I can only choose /dev/sdb for "Device for boot loader installation", and sdb doesn't show any drives. I cannot select /dev/sda. Any ideas anyone? Thanks.

    Read the article

  • Oracle Java Embedded Client 1.1 Released

    - by Roger Brinkley
    Yesterday an update release of Oracle Java Embedded Client (OJEC) 1.1 quietly slipped out door for general availability. Until last year it was pretty difficult to get your hands on either a Connected Limited Device Configuration (CLDC) for small devices or a Connected Device Configuration (CDC) for medium devices java implementation without a substantial initial commitment. But with the the release of OJWC (CLDC) and OJEC (CDC) last year that has changed. OJEC 1.1 is a binary distribution designed for installation on medium configurations which is a mid range processor requiring a  slow startup time, seamless upgrades, in a cost sensitive hardware environment  anywhere from 3.5mb to 8 mb. There are headless as well as headed versions available. It is intended for devices, such as Blu-­-ray Disc players, set-­-top boxes, residential gateways,VOIP phones, and similar. From a software point of view, OJEC is the Java runtime platform implementation of Connected Device Configuration (CDC v1.1, JSR-­-218), Foundation Profile (FP v1.1, JSR-­-219), and Personal Basis Profile (PBP v1.1, JSR-­-217)  and includes optional packages RMI (JSR 66), JDBC (JSR 169) and XML API for Java ME (JSR 280), and Java TV (JSR-­-927). New to this release is support for the XML API (JSR 280) and a number of bug fixes and performance enhancements, including an improved Just-in-Time (JIT) compilation for the x86 chipset architecture. The platforms supported include ArmV5, ArmV6/ArmV7, MIPS 32 74K, and X86 in headless mode. For embedded developers there are number of advantages to using Java and if you have shied away from the JavaME edition in the past I would encourage you to look into the updated version of OJEC 1.1.

    Read the article

  • Wifi - wireless network not working after installing Ubuntu 12.04

    - by Nilesh
    I had installed ubuntu 12.04 in my Dell Vostro 3460. Initially wired as well wireless both are not working. After installing compat-wireless-2012-07-03-pc.tar.bz2 wired network fine but wireless is not working. Previously both were working fine with ubuntu 11.10. Also presently both network are working fine in Win7. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.4 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 5 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10) iwconfig: lo no wireless extensions. eth0 no wireless extensions. ifconfig: eth0 Link encap:Ethernet HWaddr 84:8f:69:d4:35:9b inet addr:10.24.22.72 Bcast:10.24.31.255 Mask:255.255.224.0 inet6 addr: fe80::868f:69ff:fed4:359b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15332 errors:0 dropped:0 overruns:0 frame:0 TX packets:10425 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:9262594 (9.2 MB) TX bytes:1572030 (1.5 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1432 errors:0 dropped:0 overruns:0 frame:0 TX packets:1432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:145656 (145.6 KB) TX bytes:145656 (145.6 KB)

    Read the article

  • grub workaround for cannot find UUID in dual boot system fails and now grub won't boot anything

    - by keepitsimpleengineer
    New clean install of x86 11.10 desktop. Dual boot with windows XP and Linux on separate drives. After install grub will not boot Windows, but by changing boot drive boots fine. When I go to fix this I find from http://bootinfoscript.sourceforge.net/ and a link to http://sourceforge.net/apps/mediawiki/bootinfoscript/index.php?title=Boot_Problems:search my problem, the message on the grub boot error screen: error: no such device: 6??????? So I follow the Step2 and compare the output of: sudo blkid and sudo nano /boot/grub/grub.cfg The UUIDs in both match for the Windows drive, so I do the fix in Step 4 "remove the search lines for …" in /usr/lib/grub/grub-mkconfig_lib, commenting out the three lines as before? # if fs_uuid="`${grub_probe} --device ${device} --target=fs_uuid 2> /dev/null`" ; then # echo "search --no-floppy --fs-uuid --set ${fs_uuid}" # fi I run sudo update-grub and check /etc/default/grub.cfg and see that it now identifies the Windows partition not by UUID, which I suppose is the workaround. But now when I try to boot 11.10 Desktop, I get: error: no such partition… … and when I try to boot Windows, I get: error: invalid signature. So Now, how do I fix this… The boot problem and find a workaround that works?

    Read the article

  • Webcam doesn't work in Ubuntu 12.10

    - by Kzhi
    I have Gembird cam68ut. On my Ubuntu 12.10 it shows black screen in cheese and guvcview. I tested it in win7, it works fine. Here what I found: It is a uvc compliant camera, I checked on the site: 18ec:3299 USB 2.0 PC Camera (model number QC3231) ArkMicro This webcam is report by lsusb: Bus 001 Device 004: ID 18ec:3299 Arkmicro Technologies Inc. Here is the output of dmesg | tail: uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA (18ec:3299) uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. input: USB2.0 PC CAMERA as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input17 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) When I run cheese (or guvcview), here what I get in terminal: libv4l2: error turning on stream: No space left on device (cheese:11797): cheese-WARNING **: Internal data flow error. I tried it on different usb slots with the same results The Webcam's microphone works, I can record audio with it Guys, any thoughts on what can be done to make it work?

    Read the article

  • How can rotating release managers improve a project's velocity and stability?

    - by Yannis Rizos
    The Wikipedia article on Parrot VM includes this unreferenced claim: Core committers take turns producing releases in a revolving schedule, where no single committer is responsible for multiple releases in a row. This practice has improved the project's velocity and stability. Parrot's Release Manager role documentation doesn't offer any further insight into the process, and I couldn't find any reference for the claim. My first thoughts were that rotating release managers seems like a good idea, sharing the responsibility between as many people as possible, and having a certain degree of polyphony in releases. Is it, though? Rotating release managers has been proposed for Launchpad, and there were some interesting counterarguments: Release management is something that requires a good understanding of all parts of the code and the authority to make calls under pressure if issues come up during the release itself The less change we can have to the release process the better from an operational perspective Don't really want an engineer to have to learn all this stuff on the job as well as have other things to take care of (regular development responsibilities) Any change of timezones of the releases would need to be approved with the SAs and: I think this would be a great idea (mainly because of my lust for power), but I also think that there should be some way making sure that a release manager doesn't get overwhelmed if something disastrous happens during release week, maybe by have a deputy release manager at the same time (maybe just falling back to Francis or Kiko would be sufficient). The practice doesn't appear to be very common, and the counterarguments seem reasonalbe and convincing. I'm quite confused on how it would improve a project's velocity and stability, is there something I'm missing, or is this just a bad edit on the Wikipedia article? Worth noting that the top voted answer in the related "Is rotating the lead developer a good or bad idea?" question boldly notes: Don't rotate.

    Read the article

  • System speakers not recognized

    - by Kyle Maxwell
    Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

    Read the article

  • Is it unethical to sell the award of a competition? [closed]

    - by Ahmet Yildirim
    This summer, i won a competition held by microsoft & nokia... Winners from each uni. received an high-end smartphone... Knowing that particular "high-end smartphone" had not much user to develop for, as soon as i receive it, i put an ad on a ebay-like site to sell it. Eventually i exchanged it with a tablet which had high developer demand & many many users to develop for , so i could make money by developing for it. I also email microsoft asking, when something technical goes wrong with the device , can i get it fixed by warranty. Which i never received a respond. Later on, after a while... I got some feedback from a connection i have from nokia, regarding sale of the device & asking for the warranty.. He says and i quote : " They say, they werent happy that you sold the device and got offended that you asked for warranty. You should not expect anything at all from microsoft or nokia in the future. " I was like what the frak, they didnt gave it to me as a gift, i won it in a competition as an award , it is my right to do whatever i want. How ethical is that , they dont respond to my email directly? Is it unethical to sell a gadget you won in a competition? Is it unethical to ask for warranty on award?

    Read the article

  • Unable to mount NTFS Partition after resizing

    - by sam
    I was having only 15 GB space allocated to LINUX. I wanted to have more space available to linux. So I just re sized one of my ntfs partition using GParted. But after resizing I am not able to open the partition neither in Ubuntu nor in windows. OS: Dual Boot Win7/Ubuntu 10.10 The error message i get is the following: Error mounting: mount exited with exit code 12: Failed to read last sector (395458824): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS), or the NTFS boot sector is corrupt (NTFS size is not valid). Failed to mount '/dev/sda5': Invalid argument The device '/dev/sda5' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?

    Read the article

  • SSAS Compare version 1.0 released

    - by Red Gate Software BI Tools Team
    We’re pleased to announce that SSAS Compare version 1.0 has been released as a free tool. Version 1.0 includes: Comparisons of live databases and XMLA or Analysis Services Project files MDX syntax diffs and highlighting Server comparisons Deployment wizard with summaries of scripted actions Bug fixes and engine and UI refinements We’ve tested it on as many cube configurations as we could find (not just good old AdventureWorks!), but we can’t provide support for free tools — so if you’re reliant on SSAS Compare for your cube deployment, use it at your own risk. See the user license agreement in the installer for more details. SSAS Compare’s come a long way from its humble beginnings as an internal tool first developed for Red Gate’s own BI developers. Today’s SSAS Compare is now much more stable — not to mention much easier to use — and something the team is proud to have released with Red Gate’s name on. Next: Deployment Manager We’re working on integrating SSAS Compare cube deployment with our new Deployment Manager tool, so you’ll be able to create cube deployment scripts and automate the deployment process, too.  We’re documenting the process in a white paper we’ll publish online in the next week. Thank you! Thanks to all the SSAS Compare users out there. Without your feedback, we could never have produced such a stable product so quickly. We hope you continue to find useful. See you in Deployment Manager!  

    Read the article

  • MRP/SCP (Not ASCP) Common Issues

    - by Annemarie Provisero
    ADVISOR WEBCAST: MRP/SCP (Not ASCP) Common Issues PRODUCT FAMILY: Manufacturing - Value Chain Planning   March 9, 2010 at 8 am PT, 9 am MT, 11 am ET   This session is intended for System Administrators, Database Administrator's (DBA), Functional Users, and Technical Users. We will discuss issues that are fairly common and will provide the general solutions to same. We will not only review power point information but review some of the application setups/checks as well. TOPICS WILL INCLUDE: Gig data memory limitation Setup Requirements for MRP Manager, Planning Manager, and Standard Manager Why components are not planned Sales Order Flow to MRP Calendars Patching Miscellaneous Forecast Consumption - only if we have time A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

    Read the article

  • Further question on Intel graphics driver

    - by Thomas Byers
    Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

    Read the article

  • "unresolvable problem" error when upgrading from 12.04 to 14.04

    - by flyingfisch
    So I have solved this issue, but now I have another problem: An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. I am not upgrading to a pre-release version of Ubuntu and I am not running a pre-release either. I have unchecked all my 3rd-party packages using Ubuntu Software Manager, EditSoftware Sources... What else might be wrong? UPDATE After doing sudo update-manager -d and sudo apt-get update;sudo apt-get dist-upgrade as per JimB's post, and then running sudo do-release-upgrade, here what I get: Err http://extras.ubuntu.com trusty/main Translation-en Err http://extras.ubuntu.com trusty/main Translation-en_US Err http://extras.ubuntu.com trusty/main Translation-en Ign http://extras.ubuntu.com trusty/main Translation-en_US Ign http://extras.ubuntu.com trusty/main Translation-en Fetched 0 B in 0s (0 B/s) Checking package manager Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done Calculating the changes Calculating the changes Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade. This can be caused by: * Upgrading to a pre-release version of Ubuntu * Running the current pre-release version of Ubuntu * Unofficial software packages not provided by Ubuntu If none of this applies, then please report this bug using the command 'ubuntu-bug ubuntu-release-upgrader-core' in a terminal. Restoring original system state Aborting Reading package lists... Done Building dependency tree Reading state information... Done Building data structures... Done === Command detached from window (Mon Aug 18 23:53:10 2014) === === Command terminated with exit status 1 (Mon Aug 18 23:53:10 2014) ===

    Read the article

  • nvidia: switching dvi socket

    - by lurscher
    I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • What is bondib1 used for on SPARC SuperCluster with InfiniBand, Solaris 11 networking & Oracle RAC?

    - by user12620111
    A co-worker asked the following question about a SPARC SuperCluster InfiniBand network: > on the database nodes the RAC nodes communicate over the cluster_interconnect. This is the > 192.168.10.0 network on bondib0. (according to ./crs/install/crsconfig_params NETWORKS> setting) > What is bondib1 used for? Is it a HA counterpart in case bondib0 dies? This is my response: Summary: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic. Details: bondib0 is the cluster_interconnect $ oifcfg getif            bondeth0  10.129.184.0  global  public bondib0  192.168.10.0  global  cluster_interconnect ipmpapp0  192.168.30.0  global  public bondib0 and bondib1 are on 192.168.10.1 and 192.168.10.2 respectively. # ipadm show-addr | grep bondi bondib0/v4static  static   ok           192.168.10.1/24 bondib1/v4static  static   ok           192.168.10.2/24 Hostnames tied to the IPs are node1-priv1 and node1-priv2  # grep 192.168.10 /etc/hosts 192.168.10.1    node1-priv1.us.oracle.com   node1-priv1 192.168.10.2    node1-priv2.us.oracle.com   node1-priv2 For the 4 node RAC interconnect: Each node has 2 private IP address on the 192.168.10.0 network. Each IP address has an active InfiniBand link and a failover InfiniBand link. Thus, the 4 node RAC interconnect is using a total of 8 IP addresses and 16 InfiniBand links. bondib1 isn't being used for the Virtual IP (VIP): $ srvctl config vip -n node1 VIP exists: /node1-ib-vip/192.168.30.25/192.168.30.0/255.255.255.0/ipmpapp0, hosting node node1 VIP exists: /node1-vip/10.55.184.15/10.55.184.0/255.255.255.0/bondeth0, hosting node node1 bondib1 is on bondib1_0 and fails over to bondib1_1: # ipmpstat -g GROUP       GROUPNAME   STATE     FDT       INTERFACES ipmpapp0    ipmpapp0    ok        --        ipmpapp_0 (ipmpapp_1) bondeth0    bondeth0    degraded  --        net2 [net5] bondib1     bondib1     ok        --        bondib1_0 (bondib1_1) bondib0     bondib0     ok        --        bondib0_0 (bondib0_1) bondib1_0 goes over net24 # dladm show-link | grep bond LINK                CLASS     MTU    STATE    OVER bondib0_0           part      65520  up       net21 bondib0_1           part      65520  up       net22 bondib1_0           part      65520  up       net24 bondib1_1           part      65520  up       net23 net24 is IB Partition FFFF # dladm show-ib LINK         HCAGUID         PORTGUID        PORT STATE  PKEYS net24        21280001A1868A  21280001A1868C  2    up     FFFF net22        21280001CEBBDE  21280001CEBBE0  2    up     FFFF,8503 net23        21280001A1868A  21280001A1868B  1    up     FFFF,8503 net21        21280001CEBBDE  21280001CEBBDF  1    up     FFFF On Express Module 9 port 2: # dladm show-phys -L LINK              DEVICE       LOC net21             ibp4         PCI-EM1/PORT1 net22             ibp5         PCI-EM1/PORT2 net23             ibp6         PCI-EM9/PORT1 net24             ibp7         PCI-EM9/PORT2 Outbound traffic on the 192.168.10.0 network will be multiplexed between bondib0 & bondib1 # netstat -rn Routing Table: IPv4   Destination           Gateway           Flags  Ref     Use     Interface -------------------- -------------------- ----- ----- ---------- --------- 192.168.10.0         192.168.10.2         U        16    6551834 bondib1   192.168.10.0         192.168.10.1         U         9    5708924 bondib0   There is a lot more traffic on bondib0 than bondib1 # /bin/time snoop -I bondib0 -c 100 > /dev/null Using device ipnet/bondib0 (promiscuous mode) 100 packets captured real        4.3 user        0.0 sys         0.0 (100 packets in 4.3 seconds = 23.3 pkts/sec) # /bin/time snoop -I bondib1 -c 100 > /dev/null Using device ipnet/bondib1 (promiscuous mode) 100 packets captured real       13.3 user        0.0 sys         0.0 (100 packets in 13.3 seconds = 7.5 pkts/sec) Half of the packets on bondib0 are outbound (from self). The remaining packet are split evenly, from the other nodes in the cluster. # snoop -I bondib0 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib0 (promiscuous mode) 100 packets captured   49 node1-priv1.us.oracle.com   24 node2-priv1.us.oracle.com   14 node3-priv1.us.oracle.com   13 node4-priv1.us.oracle.com 100% of the packets on bondib1 are outbound (from self), but the headers in the packets indicate that they are from the IP address associated with bondib0: # snoop -I bondib1 -c 100 | awk '{print $1}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured  100 node1-priv1.us.oracle.com The destination of the bondib1 outbound packets are split evenly, to node3 and node 4. # snoop -I bondib1 -c 100 | awk '{print $3}' | sort | uniq -c Using device ipnet/bondib1 (promiscuous mode) 100 packets captured   51 node3-priv1.us.oracle.com   49 node4-priv1.us.oracle.com Conclusion: bondib1 is currently only being used for outbound cluster interconnect interconnect traffic.

    Read the article

  • Unable to mount USBDRIVE Error creating moint point: Permission denied

    - by steve
    Whenever I plug a usb into my computer a window pops up and says Unable to mount [Name of USB] Error creating moint point: Permission denied steve@goliath:/$ uname -a Linux goliath 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux steve@goliath:/$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f716ee1 Device Boot Start End Blocks Id System /dev/sda1 1 234441647 117220823+ ee GPT WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0f710ee1 Device Boot Start End Blocks Id System /dev/sdb1 1 2930277167 1465138583+ ee GPT Disk /dev/sdc: 16.0 GB, 16005464064 bytes 74 heads, 10 sectors/track, 42244 cylinders, total 31260672 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdc1 8064 31260671 15626304 c W95 FAT32 (LBA) steve@goliath:/$ sudo mkdir /media/external mkdir: cannot create directory `/media/external': Permission denied steve@goliath:/$ sudo mkdir /media/usb0 mkdir: cannot create directory `/media/usb0': Permission denied steve@goliath:/$ sudo ls -l / | grep media drwxr-xr-x 3 root root 4096 Oct 3 22:48 media steve@goliath:/$ ls /media/ -a . .. MediaShare MediaShare is the the directory on my server that has all my movies and music. If there is any information I left out please let me know.

    Read the article

  • How do I require use of the 5 GHz band when connecting to a Wireless N access point?

    - by cqcallaw
    What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

    Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >