Search Results

Search found 6033 results on 242 pages for 'partition magic'.

Page 189/242 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

  • Ubuntu One has high CPU usage but no syncing

    - by Peter
    over the weekend I updated my computer to Windows 8. So far Ubuntu One was running smoothly, but ever since the update (clean, new install) Ubuntu doesn't sync any more. In Windows 7 it would start to sync at full internet speed as soon as I drop a file. But now in Windows 8, as soon as I drop a new file into the Ubuntu One folder, CPU usage goes up to about 50 % and no network traffic occurs. This stays like that for a couple of minutes, CPU usage goes back to normal and then the client says that all is in sync - which isn't true. Is it too early for Windows 8? Do others have the same problem or is there something I can do about it? I try a couple of different things, and realized that if the file size is 20 MB the files get uploaded. The original file was 1.5 GB. I also didn't work with 200, 100 and 50 MB large files. But even with 20 MB large files, the upload is very slow and not steady. The log give plenty of this error: - twisted - ERROR - Failure: exceptions.TypeError About which I don't know the meaning. By the way, the account works just fine on the Ubuntu 12.04 partition. Any help is greatly appreciated. -Peter

    Read the article

  • How can I triple boot Xubuntu, Ubuntu and Windows?

    - by ag.restringere
    Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

    Read the article

  • Why does my root filesystem keep becoming read-only?

    - by Scott Severance
    I've lately been having an issue with my root filesystem becoming readonly. It happens some amount of time after boot. I don't know exactly when it happens, as I don't usually notice it until something such as suspending the computer or printing fails. It seems to be fairly random. Since most of my system is on that partition, I can't re-mount it without rebooting. After this happens, the system runs a fsck. Sometimes it prompts to fix problems; other times it apparently finds none. To troubleshoot, I've searched through the logs but found nothing relevant. This might be due in part to not knowing when the actual errors took place. The filesystem is apparently good to begin with, as when fsck runs its fixes it doesn't report any errors. I've scanned the disk with SpinRite. A while ago, SpinRite found and recovered from some bad sectors on the hard drive. I ran a level 4 scan (a thorough scan) after this probem appeared, but SpinRite found nothing. The SMART data reports that the disk is OK with 63 bad sectors. The number of bad sectors hasn't changed recently. I realize that the disk isn't in the best of conditions, and I have complete backups in case of catastrophic failure. Yet the lack of errors in the logs, combined with SpinRite's test results and the unchanged SMART data makes me think that this problem has some cause other than disk failure. Other than disk failure, what could cause my symptoms?

    Read the article

  • How do I remove my Windows 7 setup from a Windows/Ubuntu dual-boot?

    - by Tom
    Previously my OS was Window 7 and some day it began to show problems with booting and finally it didn't boot at all. I tried to repair it but it didn't get repaired. Then I installed Ubuntu 14.04 LTS alongside Windows and am impressed much by Ubuntu. So I want to remove all my Windows files. I searched Google to know how to do it and I found OS-Uninstaller. I have some doubts before proceeding with OS-Uninstaller - I need to keep my photos, songs, movies and personal files in my system even if Windows is removed. Normally Windows files are installed in the C Drive. My personal files are not in the C Drive. So will removing Windows files affect my personal files ? Did the OS-Uninstaller affect Ubuntu anyway ? Please note that I want to remove only the Windows installation files(the files added to my system by Windows during its installation). I don't want to change the NTFS partition to any other format since there is a probability that I will install newer version of Windows later.

    Read the article

  • mount issue in ubuntu 12.10

    - by Vipin Ms
    I'm having issue with latest Ubuntu 12.10. Let me make it more clear. I'm having the following partitions in my Laptop. Device Boot Start End Blocks Id System /dev/sda1 2048 39997439 19997696 83 Linux /dev/sda2 * 40001850 81947564 20972857+ 83 Linux /dev/sda3 81947565 123877214 20964825 83 Linux /dev/sda4 123887614 976773119 426442753 5 Extended /dev/sda5 123887616 333602815 104857600 83 Linux /dev/sda6 333604864 543320063 104857600 83 Linux /dev/sda7 543322112 753037311 104857600 83 Linux /dev/sda8 753039360 976773119 111866880 83 Linux I have also two users named "ms" and abc. Here ms is for administrative tasks and abc for my friends. When I mount any drive under "abc" user, I cannot access it under my other user "ms". Same as in the case with "ms" user. I found possible reason behind the issue. When I mount any drive under "abc" user, Ubuntu will try to mount it under "/media/abc/volume_name" instead of "/media/volume_name" . Same as in the case with "ms" user. # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 19G 11G 7.5G 59% / udev 1.5G 4.0K 1.5G 1% /dev tmpfs 599M 896K 598M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.5G 620K 1.5G 1% /run/shm none 100M 92K 100M 1% /run/user /dev/sda2 20G 172M 19G 1% /media/abc/TEST /dev/sdb1 466G 353G 114G 76% /media/abc/F088F74288F7063E /dev/sdb2 466G 318G 148G 69% /media/abc/New Volume /dev/sda5 99G 94G 323M 100% /media/abc/Songs /dev/sda6 99G 31G 63G 34% /media/ms/Films Here, you can see that "TEST" was mounted under "/media/abc/TEST". When I try to access the already mounted partition named '/media/abc/TEST" in my "ms" session I'm getting the following error. How to fix this error? Is it a bug? Is there any way to fix this without modifying the underlying file-system structure?

    Read the article

  • I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS.

    - by Liath
    I am attempting to install Ubuntu on a box which was previously running Windows 7. I have also experienced the dreaded "Unable to install GRUB" error. I am not attempting to dual boot. I have previously run a Windows boot disk and removed all existing partitions. If I run the Ubuntu 12.04 install CD and click install after the config screens, I get the error Executing 'grub-install /dev/sda' failed. This is a fatal error. (It is the same error as this question: Unable to install GRUB) All the questions I've read while looking for a solution are related to dual boot. I'm not interested in dual boot, I'm after a clean out the box Ubuntu install. How can I achieve this? (For my sanity, please use very simple instructions when responding. I don't claim to have any talent either for linux or as a sysadmin) Additional details copied from comments dated: 2012-05-29 ~15:19Z After booting from the CD, clicking Try Ubuntu, and then sudo fdisk /dev/sda I get fdisk: unable to seek on /dev/sda: Invalid argument sudo fdisk /dev/sdb gives Device contains neither a valid DOS partiion table, nor Sun, SGI or OSF disklabel. Building a new DOS disklabel with disk identifier 0x15228d1d. Changes will remain in memory only until you decide to write them. After that of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite). Command (m for help): I should add the Live CD desktop is graphically bad. I've got missing parts of programs and the terminal occasionally reflects to the bottom of the screen. But I can't imagine this is related.

    Read the article

  • Is there a command to "manually automount" an attached disk?

    - by cheshirekow
    I have an extra hard drive which I use for backups. The label on its one and only partition is "backup". When I open nautilus and click on "backup" it mounds the drive in "/media/backup", and then there's a little eject button next to it's icon in nautilus. If I manually mount the drive by creating a directory and using "sudo mount /dev/sdx /some/dir", the eject icon still shows up in nautilus, but when I press it I get an error because the device was not mounted via whatever it is that mounts it the other way. What I would like is to be able to do this "mount to /media/backup and enable the eject button" via the command line. The goal is to have the device mounted by a script which needs the drive, but then leave it mounted until I manually eject it... if I want to. P.S. I'm aware that I can have the drive auto mounted at startup, but that's not what I'm looking for here, and I'd like to know if this is possible. Clarification: I'm looking for a command to "mount the drive the way nautilus would". This should create the directory "/media/backup", mount the device to that directory, and then when I press the eject button from nautilus, it should unmount the device and delete the directory.

    Read the article

  • dpkg reporting as installed, uninstalled kernels

    - by Tony Martin
    I have run the following command to remove old kernels: dpkg -l 'linux-*' | sed '/^ii/!d;/'"$(uname -r | sed "s/\(.*\)-\([^0-9]\+\)/\1/")"'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge and only the current kernel is now installed, which I have confirmed in synaptic and by checking my boot partition. However, when I run: dpkg --list | grep linux-image I get the following response: rc linux-image-3.13.0-30-generic 3.13.0-30.55 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP rc linux-image-3.13.0-32-generic 3.13.0-32.57 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP ii linux-image-3.13.0-34-generic 3.13.0-34.60 amd64 Linux kernel image for version 3.13.0 on 64 bit x86 SMP rc linux-image-extra-3.13.0-30-generic 3.13.0-30.55 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP rc linux-image-extra-3.13.0-32-generic 3.13.0-32.57 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP ii linux-image-extra-3.13.0-34-generic 3.13.0-34.60 amd64 Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP ii linux-image-generic 3.13.0.34.40 amd64 Generic Linux kernel image Probably not a problem, but just wondering why versions -30 and -32 are reported as present. Can it be rectified? TIA

    Read the article

  • Share home directory between Linux and Windows dual boot

    - by user877329
    This question is somewhat similar to How to use Windows Share has home directory, but in this case Windows is not running. I have installed a dual-boot configuration with Ubuntu 12.04 and Windows. My Windows partition is mounted on /C. Now I want either Ubuntu to locate home directories in /C/Users Which is the location of windows accounts or I want Windows to use D:\home for home directories. (D is the name of the Ubuntu root directory). For the first approach, I have managed to create a test user account test-user:x:1004:1001:Test:/C/Users/test-user:/bin/bash The account works but test-user cannot run any X session. From .xsession-errors chmod: Changing rights on ”/C/Users/test-user/.xsession-errors”: Operation not permitted Would it help get rid of that chmod, which has no effect? How do I? If I use the second approach, I need the Ext2fsd driver, which seems to work, but I am not sure if Windows maps the Ext2 system that early. Here is my fstab proc /proc proc nodev,noexec,nosuid 0 0 UUID=e7cef061-ed8d-4a82-b708-0c8f4c6f297f / ext3 errors=remount-ro 0 1 UUID=2CDCEB43DCEB0644 /C ntfs defaults,umask=007,gid=46 0 0 UUID=b087b5c0-b4bd-47e7-8d34-48ad9b192328 none swap sw 0 0 Update: I found something here: http://www.tuxera.com/community/ntfs-3g-advanced/ Will work if i do a correct mapping between NT users and Linux users.

    Read the article

  • preseeded installation keeps asking for confirmation while creating RAID-Partitions on certain hardware-platform

    - by Marc Shennon
    I am aware of the partman-md/confirm_nooverwrite thing, that was the solution to most of this problems in the past. The thing is, that the preseed-file works for almost all hardware-platforms I tested, but only for one (Primergy MX130) it keeps asking for confirmation, before writing the partition-layout to the disks. All machines I tested are running with two SATA Disks, nothing special. I'm not really sure, what information could be needed in order to investigate the cause of this behaviour, but I would of course be willing to provide more information, if someone has an idea. Relevant part of the preseed file is the following: d-i partman-auto/disk string /dev/sda /dev/sdb d-i partman-auto/method string raid d-i partman-md/confirm boolean true d-i partman-partitioning/confirm_write_new_label boolean true d-i partman-md/device_remove_md boolean true d-i partman/choose_partition select finish d-i partman-md/confirm_nooverwrite boolean true # Write the changes to disks? d-i partman/confirm boolean true d-i mdadm/boot_degraded boolean true # RECIPE # Next you need to specify the physical partitions that will be used. d-i partman-auto/expert_recipe string \ multiraid :: \ 500 10000 1000000000 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 512 1000 786 raid $lvmignore{ }\ $primary{ } \ method{ raid } \ . \ 8192 10240 10240 raid $lvmignore{ }\ method{ raid } \ . # Parameters are: # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> <devices> <sparedevices> d-i partman-auto-raid/recipe string \ 1 2 0 ext4 / /dev/sda1#/dev/sdb1 . \ 1 2 0 ext2 /boot /dev/sda2#/dev/sdb2 . \ 1 2 0 swap - /dev/sda5#/dev/sdb5 .

    Read the article

  • Ubuntu Boot Slow - Late Drive Access

    - by Mo2
    So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

    Read the article

  • Lost Windows 7 files

    - by Pader
    My intention was to have a dual boot system with Ubuntu and Windows 7. Obviously I did something wrong because although I had a system menu on booting (is it normal to appear DOS-like?) which gave me an option of booting into windows 7, I was unable to do so. Also, when I booted into Ubuntu, my Windows 7 drive was not available. The Windows 7 drive was an internal 1TB drive partitioned into a 200GB (OS) and a second partition making up the remainder. I was still unable to access this Windows 7 drive even after deleting Ubuntu as I kept getting an 'requires an NTFS drive' error, or something similar. I could not even re-install Windows 7 as the disk was not recognised. I did eventually get the drive back by but I cannot for the life of me remember how. I did try to recover my lost W7 data using Ontrack Easy Recovery (which has always been succesfull in the past for post format recovery) but it would not recognise the 1TB although it was now formatted as NTFS. From other posts on this site, I gather that this is considered a 'Windows 7 Site' problem by Linux users. However, I would dearly love to recover some of my lost Windows 7 files. I had resigned myself to a lot of lost personal data but I happened to notice that a 2TB drive I had connected through a USB docking station had been repartitioned. It must have happened when I installed Ubuntu as I can think of no other explanation. I certainly do not remember consciously requiring Ubuntu to do this. The additional two partitions on the 2TB drive, the original Windows

    Read the article

  • Unsure about TRIM enabled on my SSD

    - by user84750
    I have a SSD OCZ Vertex4 installed on my laptop. I'm running Ubuntu 12.04 LTS. I have enable TRIM by adding "discard" to my fstab file. (also added option noatime). I rebooted my Ubuntu and followed These instructions here to test TRIM. The end results of my tempfile was all ffff's, when it should have read all zero's, which is telling me TRIM is not really working or enabled correctly. Did I miss something? Also, will it be a problem if only my /home directory is encrypted. AND if you ask why I have swap on my SSD, it's because I let Ubuntu set up my partition. When I have my SSD, I just wanted to install Ubuntu as fast as possible. =) I've done testing to see at which point it will start to use swap and it took a lot of applications open to finally use swap. I currently have 4 GB of memory. I might shrink this to like 512 MB or 1 GB the most. Here's some info about my file system setup. sudo hdparm -I /dev/sda1 | grep "TRIM supported" Data Set Management TRIM supported (limit 16 blocks) sudo fdisk -l /dev/sda Device Boot Start End Blocks Id System /dev/sda1 * 2048 242016255 121007104 83 Linux /dev/sda2 242018302 250068991 4025345 5 Extended /dev/sda5 242018304 250068991 4025344 82 Linux swap / Solaris ls /dev/mapper control cryptswap1

    Read the article

  • How do I remove a malformed line from my sources.list?

    - by eminencejae
    I have unistalled and reinstalled the Ubuntu Software Center as per info I found in a similar thread and I got the same response about line 91 or something like that. I just tried to upload a screen shot but since I'm new it won't allow me to. I also can not figure out how to cut and paste anything so I have to hand type what the error screen says, both when I attempt to open the software center and nothing happens, when I try to enter commands into the terminal to uninstall, reinstall, whatever I get the same following: COULD NOT INTITIALIZE THE PACKAGE INFORMATION An unresolvable problem occured while initializing the package information Please report t:his bug against the 'update-manager' package and include the following error message: 'E: Malformed line 91 in source list/etc/apt/sources.list (dist parse) E: The list of sources could not be read., E: The package list of status file could not be parsed or opened. How do I report bugs? What can be done about this. I have searched and everything everyone says to do leads me back to the same line error message. So, I don't know how to get to line 91 in the source list; to tell you what it says. Sorry, I'm really new to this. That is what I need is to find out how to get there and fix what it says. I would really like to NOT have to re partition my hard drive and start from scratch, so I'm really looking forward to getting this problem solved. I need to be able to install new software.

    Read the article

  • Hard time installing Ubuntu

    - by Nick
    I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

    Read the article

  • Dual booted Windows 7 freezes after login screen

    - by Cathal
    First-time Linux user, using a Packard Bell Easy Note TS laptop. My problem arose after I dual boot installed Ubuntu 12.04 on Windows 7 via WUBI. I backed up all my data, and reinstalled Windows from factory settings on the recovery partition. When I first tried to install Ubuntu I mistakenly closed the lid at the start of the installation, stopping it. After that I rebooted, and my second installation attempt went without a hitch. Ubuntu works perfectly, the data on the partitions seem to be fine. My problem is I can't log back in to Windows 7. After selecting it in GRUB, and then in the Windows 7/ WUBI choice on boot, it loads up perfectly til the user log in screen. After the password is inputted, it stalls on the "Welcome" busy screen. This happens in Safe mode as well. Startup repair can't find a problem and neither can CHKDSK. System restore and Last known good config have no effect either. If anyone could help me out, I'd be real grateful. edit in response to the question below, since I don't know how to comment: Windows was installed first and its partitions are the first on the list. Should I move the windows partitions to after the Linux ones on the disk? Thanks for your help.

    Read the article

  • Ubuntu won't start - blank screen with flashing white cursor

    - by loomy
    My laptop is dual-booted with Windows 8 on one partition and Ubuntu 12.04.3 on the other. I've searched for my issue already, but nothing I've found so far has solved the problem. Since last week, when I try to boot Ubuntu from GRUB, I am taken to a purple screen (as usual), but then to a black screen with a blinking white _ cursor. I've tried leaving it, but nothing else happens. When I hold Shift and edit the GRUB entry to change 'quiet slash' to 'text', the back screen instead asks for my login and password. When I put them in, it tells me the date of my last logon, and then waits for further commands. Being very very new to Ubuntu, I have no idea at all what to try out at this point. I tried to launch FailsafeX, but while that was beginning, it said "unable to run server /usr/bin/x" No such file or directory", then shortly after returned to the recovery mode menu. Pressing Ctrl+Alt+Delete goes through an Ubuntu loading screen, then the laptop then restarts. Any suggestions will be very appreciated, and apologies if this is a common issue that has been answered a million times before.

    Read the article

  • All files gone after running fsck. How can I recover my files?

    - by cinlung
    I am a newbie in Linux. So this is my story I installed Ubuntu server 10.04lts. It worked great for many months, until today i decided to run fsck on the system partition and although it warned me, I kept pressing yes and now it will only boot into grub prompt. So i read some article and tried grub reinstall. But before performing grub reinstall, i decided to run fsck again from Ubuntu 10.04 lts for desktop live CD. The fsck painfully passes, now my drive is recognized as ext4 system and I am able to mount it again. However, all i can see is just boot directory and lost&found. I tried to perform grub reinstalling by doing grup-install stuff, now my grub is still not loading right, my files are missing, and the weird thing is that the amount I found used by boot and lost n found is only 5gb and the amount used in he hdd is 8 gb. So my files must be somewhere in the hdd. Is there any sinple way maybe a windows tool or something yo recover my files? I only need to retrieve my database backup and everything else can go. I am freaking out here. Please help.

    Read the article

  • Grub2 attempting to boot hd1 when it should boot hd0

    - by JoBu1324
    I'm attempting to perform a "normal" install on a USB3 SSD (I don't know if it is noteworthy, but I don't have a swap partition). The installation proceeds normally (I'm installing from a USB2 device I created using LiLi Boot, with a copy of Ubuntu 12.10 64bit that I downloaded directly from the source. The system I'm running Ubuntu on has had a more traditional installation of ubuntu running on it without issue (also 12.10), so I know that everything works A-OK when booting from a 7200RPM internal disk. There are a number of oddities that I've noticed so far, including graphics corruption, but the first and most pressing issue is that Grub2 refuses to recognize the correct hd. From /boot/grub/grub.cfg: if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd1,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos1 --hint-efi=hd1,msdos1 --hint-baremetal=ahci1,msdos1 b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 else search --no-floppy --fs-uuid --set=root b58ee4f7-d41d-400a-b7b8-18bd1f0ae9d3 fi font="/usr/share/grub/unicode.pf2" fi This is from a 100% fresh install of linux (first boot), which was installed while no hard drives were connected to the system, other than the USB2 LiLi drive. The system refuses to boot unless I change the hd1,msdos1 - hd0,msdos1 in the grub menu at boot, when it is the only disk device connected to the PC. What options are left for me to troubleshoot this issue? I've been racking my brains and taxing the internet trying to dig up something on this problem, but now I'd like to see if the Ubuntu community can rise to the challenge and help me fix this boot problem. This is the second time I've attempted this particular setup. The first time, after days of wasted time, I managed to get it to boot every other boot - i.e. every even boot it would boot into Ubuntu like it was happy; every odd boot it would boot into the BusyBox or Grub prompt. At one point it complained that it couldn't find /dev/disk/by-uuid/[the disk], which I found most perplexing, since the disk was there and booted before and after the occurrence (with intervention).

    Read the article

  • X won't start, root filesystem mounted read only

    - by TK Kocheran
    I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

    Read the article

  • Dealing with Fine-Grained Cache Entries in Coherence

    - by jpurdy
    On occasion we have seen significant memory overhead when using very small cache entries. Consider the case where there is a small key (say a synthetic key stored in a long) and a small value (perhaps a number or short string). With most backing maps, each cache entry will require an instance of Map.Entry, and in the case of a LocalCache backing map (used for expiry and eviction), there is additional metadata stored (such as last access time). Given the size of this data (usually a few dozen bytes) and the granularity of Java memory allocation (often a minimum of 32 bytes per object, depending on the specific JVM implementation), it is easily possible to end up with the case where the cache entry appears to be a couple dozen bytes but ends up occupying several hundred bytes of actual heap, resulting in anywhere from a 5x to 10x increase in stated memory requirements. In most cases, this increase applies to only a few small NamedCaches, and is inconsequential -- but in some cases it might apply to one or more very large NamedCaches, in which case it may dominate memory sizing calculations. Ultimately, the requirement is to avoid the per-entry overhead, which can be done either at the application level by grouping multiple logical entries into single cache entries, or at the backing map level, again by combining multiple entries into a smaller number of larger heap objects. At the application level, it may be possible to combine objects based on parent-child or sibling relationships (basically the same requirements that would apply to using partition affinity). If there is no natural relationship, it may still be possible to combine objects, effectively using a Coherence NamedCache as a "map of maps". This forces the application to first find a collection of objects (by performing a partial hash) and then to look within that collection for the desired object. This is most naturally implemented as a collection of entry processors to avoid pulling unnecessary data back to the client (and also to encapsulate that logic within a service layer). At the backing map level, the NIO storage option keeps keys on heap, and so has limited benefit for this situation. The Elastic Data features of Coherence naturally combine entries into larger heap objects, with the caveat that only data -- and not indexes -- can be stored in Elastic Data.

    Read the article

  • cannot boot Ubuntu after fresh install

    - by Jonathan
    I just installed Ubuntu on a Lenovo v570, and cannot boot into the system. All I get is a loop, where some (bios) info is displayed, and then the computer asks me where I would like to boot from. I tried reinstalling, reinstalling with a custom partition scheme, and boot -repair after the install. None of these work. I can see the files on my harddisk have been copied. I have installed many Ubuntus in the past, as well other distros where custom partitioning is required. I don't know where to find any useful information since I don't even get too the grub menu. One odd thing I noticed. The bios now had options to boot USB, OpenSuse,Fedora, or the HD. I am not dual booting. I also realized that the boot info is for a network boot, which means the computer is not recognizing what to boot. It is boot an HD problem, because I can install other OSs just fine. I am completely stumped. I would like to settle this, and end up with a tutorial, that explains to me what happened.

    Read the article

  • "The volume filesystem root has only..."

    - by jcslzr
    I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

    Read the article

  • Restoring backup with Deja Dup from external HD

    - by widgg
    So, here's the problem that I have with restoring. First, I backed up like everything. So I had place on the external HD for only one copy. I had to reinstall everything, but I didn't worry because I had a backup. But now, restoring doesn't work and it starts to be annoying. So, I right click "Restore missing files...". Then I have the popup window from Deja Dup asking where is the backup. So, I select the external HD and either put nothing in "folder" or just put ".". Thinking that it should be the base to look for backups. In both cases, after a while scanning, I get: The Volume "Filesystem root" has only 139.7mb disk space remaining. But my partition "/home" has 799.6Gb free. Also, I just want to restore some files, I don't need all of them. On my external HD, there's a file called: duplicity-full.20120514T220834Z.manifest. A text file. In it, I can see that everything is partitions in files of 52mb. So, small files are in one archive while very large files are split in multiple one. But I can see the exact list of file that I have. So, I'm guessing that my backup is intact. What am I doing wrong ? Is possible that it failes, even to list all the files, because I don't have enough space left on my ExtHD ? Why can't duplicity used another location to do that ?

    Read the article

  • How can I get a user account back?

    - by Ilan
    With all my computers I make one partition for the root and another for /home. This is useful for disasters where I need to reformat the root for ubuntu, but leave my /home data untouched. With the upgrade to 13.10 I had troubles on my wife's computer so I reinstalled 13.10. My own /home files came up, as expected, as if nothing had happened. For my wife, it is a different story - and that is the part where I need help. If I go into Files, computer I can see the home directory. There I can see ilan (my files) and yona (my wife's files). I can open yona, documents and see all her work. This means that all is well and I just need to hook up to her files. So the problem is that I need to create a user called Yona or yona, but something which will get me to exactly the files of interest. I'm not sure if I created her account as standard or an administrator. Is there any way I could tell by looking at the files in /home? I created a new user called Yona as a standard user (hoping that this is the right guess). The account came up as disabled. I pressed on the disabled button so I could change the password. I put in her password but it was refused as too short. Too short, too short, but that is what was used and that is what I need. Can anyone help me before my wife comes home and shoots me? Thanks, Ilan

    Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >