Search Results

Search found 6346 results on 254 pages for 'turn a'.

Page 189/254 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• Need a helpful/managed VPS to help transition from shared hosting

  - by Xeoncross

  I am looking for a VPS that can help me transition out of a shared hosting environment. My main OS is Ubuntu, although I am still new to the linux world. I spend most of my day programming PHP applications using a git over SSH workflow. I want PHP, SSH, git, MySQL/PostgreSQL and Apache to work well. Someday after I figure out server management I'll move on to http://nginx.org/ or something. I don't really understand 1) linux firewalls, 2) mail servers, or 3) proper daily package/lib update flow. I need a host that can help with these so I don't get hit with a security hole. (I monitor apache access logs so I think I can take it from there.) I want to know if there is a sub $50/m VPS that can help me learn (or do for me) these three main things I need to run a server. I can't leave my shared hosts (plural shows my need!) until I am sure my sites will be safe despite my incompetence. To clarify again, I need the most helpful, supportive, walk-me-through, check-up-on-me, be-there-when-I-need you VPS I can get. Learning isn't a problem when there is someone to turn too. ;)

  Read the article

• How do you enable webcam support in Facebook for Ubuntu 10.04?

  - by Jonathan

  I think I have finally arrived at an insolvable equation: Chromium v.7 + Ubuntu 10.04 + Sun Java 6 + Webcam + Facebook + Flash 10 = non-functional All of those items listed above are potential points of failure in this situation, and any help narrowing them down would be fantastic. I am simply trying to enable webcame support directly through Facebooks website. Forum searches and the usual googling turn up few posts related to this specific equation. Two of the major suggestions include: 1) Installing the Sun (I refuse to say oracle sob)-provided Java implementation instead of the OpenJDK normally installed in Ubuntu. And yes, after installing it, I did update all my default supports to use the sun commands over the openjdk. 2) Somehow enabling Facebook as a permitted site to access my webcam using Flash settings. I have not been able to explore option 2 because I cannot find a way to adjust the Flash settings in chromium 7. Other factors that do not help include the fact that I am pretty sure facebook changes its webcam interface every 10 seconds just to keep troubleshooters and support personnel on their toes. If anyone has a OTP that informs us of the next shift in the app, a leak would be greatly appreciated!

  Read the article

• Ubuntu 10.10 - PC shutdown before boot shortly after BIOS loads

  - by clem

  Hi - Since installing Ubuntu 10.10 from Karmic I've started getting problems with starting up the PC. I've done a complete wipe (Boot and Nuke) of the hard drive and reinstalled Ubuntu 10.10 but the problem still occurs. There is no dual boot on the PC, just Ubuntu. Here is the problem: Each morning, when I turn the PC on from being off overnight, the PC starts up and loads the BIOS. I get the following message : "Verifying DMI Pool Data... K8 NPT Data Change...Update New Data to DMI!....... Then poof the computer shuts off. However, after switching the computer back on around 6 or 7 times after it's turned itself off, it will eventually boot up without any problem. Also, once up and running for a while, I can shutdown and restart the PC first time, without any issues. I have also noticed a problem with the USB mouse being recognised and once I finally get the computer booted up, I need to unplug and then plug the mouse back in to get it working. I've opened the PC up and checked the connections (cables, cards and memory) and it all seems fine. The main issue with troubleshooting this problem is I cannot test any suggestions or fixes until the next morning because once the computer is up and running it will remain so! I do not leave the computer on overnight to save energy. So.. is this a hardware / boot software issue? This is a very odd problem and I have googled to no avail. Any suggestions? Many thanks Clem

  Read the article

• Hard drive causing BSOD

  - by JoshIrving

  I've come across a problem after building my new PC and installing a clean Windows 7. I originally planed on a RAID 1 or 0 but after further research I decided against it. So I was left with two 1TB Western Digital Black SATA 6Gb/s hard drives. My plan now was to use my second hard drive as a backup (using Windows Backup or 3rd party software). I set both hard drives to AHCI in the BIOS and installed Windows 7. I went through the lengthy process of downloading and installing each driver manually (latest versions), using the motherboard disk for a list of what I need. After a few restarts and before installing any software, I took an image backup onto DVD and the second hard drive. First witnessed the problem during the first scheduled Windows backup. The progress bar froze at about 70% (doc backup done, image backup in progress). It stayed still for 2 hours until it blue screened. Next time the backup froze, I tried shutting down. It logged me out and got stuck at the last step ("Shutting down" and blue spinner) for an hour, until I hard shutdown. I later realised this hasn't got anything to do with the backup. I ended up blue screening on almost every shut down (same place). Turns out, it's because of the second hard drive spinning down or turning off. The computer will now shutdown properly, as long as I remember to read or write to the second drive before executing shutdown. I've now set "Turn off hard disk after: Never" - No problems, so far. Do I have dodgy hard drive(s) or should I investigate the POWER_STATE_DRIVER_FAILURE BSOD - can it be a driver issue? AHCI?

  Read the article

• How to Access User Directory shared by Apache on OS X Mountain Lion?

  - by schluchc

  When trying to access the local user web page on localhost/~username, I get a "403 Forbidden". The system web page in /Library/WebServer/Documents is accessible on localhost/ though, so I assume Apache is working fine. I know that this problem has been discussed several times, also on superuser. I implemented and checked all I could find, but I still couldn't solve the problem and would be glad if someone had a suggestion for this particular case: sudo apachectl -t returns Syntax OK. I have a username.conf file in /etc/apache2/users/: <Directory "/Users/username/Sites/"> Options Indexes MultiViews FollowSymLinks AllowOverride AuthConfig Limit Order allow,deny Allow from all </Directory> as proposed here [SuperUser] and in several other tutorials. The permissions of the username.conf file are -rw-r--r-- root wheel, as they should be. The httpd.conf is unchanged and therefore contains the line Include /private/etc/apache2/extra/httpd-userdir.conf. That file in turn contains UserDir Sites Include /private/etc/apache2/users/*.conf <IfModule bonjour_module> RegisterUserSite customized-users </IfModule> So the httpd*.conf files should be ok. The permissions of /Users/username/Sites is drwxr-xr-x 10 username staff and -rw-r--r--@ 1 username staff for the index.html. In the error log I simply get a [Sun Nov 25 22:14:32 2012] [error] [client 127.0.0.1] (13)Permission denied: access to /~username/ denied. And yes, after each change I did the sudo apachectl restart. Any help no how to solve the problem or how to further analyze it would be highly appreciated!

  Read the article

• Disable all the idiot-checking in Mac OS X

  - by Fake Name

  I am a Windows/Linux user, who is learning Mac OS X out of interest in doing dev-work for the iPad which I recently purchased. However, OS X is driving me nuts by trying to protect all it's system files, hiding all of the important OS components I want to tweak, and generally making it impossible to do any modification to the OS in general to make it more usable. Therefore, is there a way to turn off all the idiot-checking in Finder? On XP, I can disable "Hide Protected Operating system files" and set "Show Hidden Files". On linux, there really aren't many hidden files, and changing the configuration for .files is easy enough in Gnome and XFCE. How can I set up OS X in a similar way. I am not new to computers, and I am fully aware that deleting system files can damage or even irreparably disable a OS install. Therefore, If I intentionally try to delete a file, or move something, it's probably intentional, and I am willing to accept the consequences in any case. At this point, I have fallen back to doing everything through the command line (which takes forever), because Finder is practically unusable. (As for what I am attempting to do, I also asked about GUI changes here.)

  Read the article

• What causes a switch port to receive data not destined for it?

  - by user1693454

  We are having an intermittent fault which is effecting one of our control systems on one of our HP Procurve switches. For some reason, this PLC (10mbit port - 192.168.6.56) which is attached directly to the HP Switch intermittantly start's receiving data which is not destined for it. The data is being sent from a Thecus NAS with latest firmware (192.168.6.218) to a physical IBM Server running Win2003R2 and SAP (192.168.6.225). The problem does not just send to this server, it has been to other physical servers in the past too, but always from the Thecus NAS. I am using a monitor port to wireshark what is going in/out of the PLC - normally there would be about 1mb in/out per 2 or 3 minutes - only a server asking the state of the coils. When the problem occurs, there is a flood of data being put onto the PLC line - in this captured instance, about 67mb in less than a minute. Due to this, there is no way that the PLC can be queried as the port is effectively DOSed, in turn killing part of our factory. I know that having Production on the same vlan as IT is not a good idea - I agree, however it cannot be changed at the moment (will have to wait 3 months), as well as the problem has only started happening in the last 3 months. Here is a screen cap of one of the packets being sent from the Thecus NAS which was captured from the PLC port on the HP Switch: And there are over 700 of these in this one 1024kb file. If anyone has any idea on what could be going on, some help would be greatly appreciated. If you need to know anything more, let me know! Cheers!

  Read the article

• Should I buy more RAM for my computer or a better CPU?

  - by Reijer The Coder

  I have recently bought a new laptop, an ASUS N56VJ-S4149H. I bought it to use it in all possible ways I could want, so that would be gaming downloading and streaming movies browsing the web and programming software. So far it has been running great but one thing annoys me a little bit. I frequently play Mount&Blade: Warband, it's a great game and you should check it out. Everything runs smoothly but only when I turn down the 'Texture Detail'. Otherwise it will lag a lot and I can't really play. Now my question is: Is this a problem of not enough RAM? At first I was really sure it was but after thinking about for a while I'm not anymore. My computer only has 4 Gigabytes of RAM and there is still a slot open. So will it improve when I buy another 8 Gigabytes? EDIT: It has an Nvidia GeForce GT 635M inside. and an Intel Core i5 3230M CPU with 2,6 GHz. Help and answers are really appreciated. Thanks to all.

  Read the article

• vSphere education - What are the downsides of configuring virtual machines with *too* much RAM?

  - by ewwhite

  VMware memory management seems to be a tricky balancing act. With cluster RAM, Resource Pools, VMware's management techniques (TPS, ballooning, host swapping), in-guest RAM utilization, swapping, reservations, shares and limits, there are a lot of variables. I'm in a situation where clients are using dedicated vSphere cluster resources. However, they are configuring the virtual machines as though they were on physical hardware. In turn, this means a standard VM build may have 4 vCPUs and 16GB or more of RAM. I come from the school of starting small (1 vCPU, minimal RAM), checking real-world use and adjusting up as necessary. Some examples from a "problem" cluster. Resource pool summary - Looks almost 4:1 overcommitted. Note the high amount of ballooned RAM. Resource allocation - The Worst Case Allocation column shows that these VMs would have access to less than 50% of their configured RAM under constrained conditions. The real-time memory utilization graph of the top VM in the listing above. 4 vCPU and 64GB RAM allocated. It averages under 9GB use. Summary of the same VM What are the downsides of overcommitting and overconfiguring resources (specifically RAM) in vSphere environments? Assuming that the VMs can run in less RAM, is it fair to say that there's overhead to configuring virtual machines with more RAM than they need? What is the counter-argument to: "if a VM has 16GB of RAM allocated, but only uses 4GB, what's the problem??"? E.g. do customers need to be educated? What specific metric should be used to meter RAM usage. Tracking the peaks of "Active" versus time?

  Read the article

• Can I install windows on an SSD and access data from my old windows HDD?

  - by nzifnab

  I purchased new computer components, switching my hardware from AMD and Radeon to Intel and Nvidia. I kept components from my old computer like the powersupply and two HDDs. Everything appeared to install correctly and the system booted into the BIOS just fine (after a brief snafu with the CPU fan). My goal was to use the two harddrives and just be able to turn on the computer and load up my old windows install with all the files, programs, and documents. I expected to have to call Microsoft to re-register the windows install for the new hardware (since I had to do that last time I upgraded w/ the same windows version). When the computer attempts to boot into windows it briefly flashes a bluescreen and then restarts. System recovery gives a message something like "BadDriver Failover" something something. I assume this is because it's trying to use amd drivers for an intel chipset (or something...?) and I've been as-yet unsuccessful in getting it to boot into my old windows partition. SO! I decided eff it, maybe I'll go visit my nearest Micro Center and buy a 200 GB SSD, install windows onto that, and then... be able to access just the contents of both of my other harddrives? I don't intend on running any of the programs but there were some saved files I would like to salvage from the 500 GB harddrive, The 1.5 TB harddrive only had files on it, no OS or applications so I'd also expect to still be able to access it. Is this possible? Can I install the SSD and only format/install windows onto it and still access the contents from my two transferred-over drives?

  Read the article

• Postfix not delivering from external senders and not logging anything

  - by simendsjo

  Some semi-recent upgrades must have broken my postfix+dovecot configuration, but I'm having problems finding out what the cause is. My domain is simendsjo.me with the MX record mail.simendsjo.me. I can send mail to both local and external recipients, and it delivers mail from internal mailboxes. The problem is that mail from external senders isn't delivered, and nothing is logged at all. The external sender also doesn't receive any errors. I have no idea where to ever start looking as nothing is logged at all when external mail is sent to my server. So the first issue would be: How can I turn on some debug messages for postfix? I've tried: debug_peer_level = 2 debug_peer_list = simendsjo.me .. And _level = 999 and _list = gmail.com where I'm trying to send emails from. but nothing is logged. When sending mails from a local mailbox (but from an outside computer, not localhost), a lot is logged. I don't have any rules in iptables either. Any ideas how I can get some debug messages for postfix?

  Read the article

• Static IP addressing issue in Ubuntu on BeagleBoneBlack Rev C

  - by Stringfellow

  I have my BBB configured to use a static IP address using the following in the file /etc/network/interfaces: allow-hotplug eth0 iface eth0 inet static address 192.168.0.1 netmask 255.255.255.0 network 192.168.0.0 This seems to work ok on boot, but when the ethernet cable is unplugged and then plugged back in, I lose the IP address. Any ideas what's going on here? Another weird symptom: If I boot the BBB with the network cable unplugged, but the switch it's plugged into off, I'll get my static IP. But, when I turn the switch on, I'll get a DHCP-assigned address. This is even though I have it configured with a static IP address. One last thing. If I ifdown etho, the interface will be gone when I do an ifconfig. If I wait a few seconds, though, and then re-run ifconfig, it will reappear, without an IP address. (Before I disabled IPv6, I used to get a IPv4 DHCP address in this case... weird). When that happens, I get a message like this in /var/log/messages: Apr 23 20:32:06 beaglebone kernel: [ 737.170172] libphy: 4a101000.mdio:00 - Link is Up - 100/Full Apr 23 20:32:06 beaglebone kernel: [ 737.170304] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Here's my uname -a: root@beaglebone:/etc# uname -a Linux beaglebone 3.8.13-bone47 #1 SMP Fri Apr 11 01:36:09 UTC 2014 armv7l GNU/Linux Any ideas what's going on here?

  Read the article

• D-Link wireless router losing outbound data

  - by gsteinert

  I have a Linux box running the Apache web server behind a D-Link wireless router (nothing fancy, just standard kit that comes with Virgin Media broadband). My issue is that when requesting web pages (from within the network or via the web), the back end of the page seems to be being dropped. For example, I tried to display a text-only file, and all I could get was the first 40-70% of the file (it changed slightly with each refresh). The apache access logs show that only part of the data was being sent (~6000 bytes instead of the 12000+ bytes of the file). Removing my router from the equation fixes the issue and I can download any files no matter the size with no problems. My theory is that the uploaded packets are either being dropped or held up by the config of the router. Is there anything I can do to alleviate the problem? (Perhaps a way of reconfiguring the router to upload packets harder/better/faster/stronger or an option in apache that provides a workaround) As a last resort I will get a second NIC for my Linux box and turn it into a router, but that would mean the box will be on 24/7... not the most ideal of circumstances. Gary

  Read the article

• Why am I getting a Sharepoint error on a simple "hello world" web page?

  - by Fetchez la vache

  I've been granted admin access to an internal IIS server on which I need to set up a web site. Before doing anything technical I wanted to ensure that I could access the server, but when attempting to access a simple page (that does not refer to Sharepoint) at http://localhost/index.html when logged onto the server directly, I am getting Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'Microsoft.SharePoint' or one of its dependencies. The system cannot find the file specified. Source Error: Line 1: <%@ Assembly Name="Microsoft.SharePoint"%><%@ Application Language="C#" Inherits="Microsoft.SharePoint.ApplicationRuntime.SPHttpApplication" %> Source File: /global.asax Line: 1 Assembly Load Trace: The following information can be helpful to determine why the assembly 'Microsoft.SharePoint' could not be loaded. WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. -------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:2.0.50727.5456; ASP.NET Version:2.0.50727.5456 To be quite honest I know zip about Sharepoint, so why am I getting a sharepoint error on a basic "hello world" html page? Cheers :) Update: I've since supposedly uninstalled Sharepoint, but am still getting this error. Any ideas welcome!

  Read the article

• My scanner isn't responding. It is connected to a SCSI interface using Windows XP

  - by Bob

  I have a Microtek ScanMaker 9600XL scanner. The best part about it is that it is 12x17 inches. Wowza! The worst part about it is that I've had it working at one point, with the same cable, same card, same computer, but have since re-installed Windows XP on it. Currently it will turn on, and blink the Power and Ready lights. They should be solid. I've done my best to find documentation for this, but all I've really gotten is the content on the Microtek site. I've tried turning the scanner on, then the PC. Turning the PC on, then the scanner. When I try launching the software it pops up a dialog saying "ScanWizard Pro can't find any scanners! Use SCSI Check to find a scanner." I know the scanner has a pair of little buttons on the back. These cycle up/down a counter. I think it goes 0-7. Any thoughts on what that does, or how to proceed troubleshooting? I think my next step is to try each of those numbers, and do both pc booted first, and scanner booted first for each of those numbers...

  Read the article

• Windows 7: Dual Monitor Issue

  - by sdoca

  I have a Dell laptop with a docking station and two external monitors hooked up. I'm running Windows 7 64 bit. Originally, the two monitors were the same - Dell 1908FP. I have replaced one of them with an HP LA2405. I have set the HP 24" (1920 x 1200 connected via DVI port) as montior 1 and extended to use the Dell 19" (12080 x 1024 connected via VGA port) as monitor 2. I have set my power plan so that when the laptop is plugged in, it will turn the monitors off after 10 minutes, but it will not put my laptop to sleep. However, now that I have the HP monitor, when I unlock my laptop and the monitors come back on, all my windows are resized and shifted to the top left corner of the HP monitor as if they had been resized for display on the smaller Dell monitor. A co-worker has the exact same laptop and monitor configuration but doesn't experience this issue, so I figure there's some configuration that's different but we can't find it. I haven't been able to find any mention of a similar problem doing an internet search, but I'm not really sure what terms to use in my search. Anybody have any suggestions as to what may be causing the issue? OS setting? Monitor setting? EDIT: My laptop is using the Intel Graphics and Media Control Panel/drivers.

  Read the article

• Windows7: Howto force a "do you really want to shutdown?" dialog

  - by Vokuhila-Oliba

  Sometimes I wanted to choose "logout current user", but then I hit "Shutdown" by accident. Nearly everywhere else Windows7 is asking "do you really want to do this Yes/No". But that's not the case when I hit the "Shutdown" button. Windows7 shuts down immediately without giving me the chance to correct my mistake. Q1: So I am wondering why Windows7 shuts down immediately without asking "really do that?" in this case. Q2: Is there a way to change this behavior? E.g. Could I force Windows7 to display a dialog asking "Do you really want to shutdown ?". ADDED: I am running Windows7 Professional 64bit. ADDED: I tried to change this behavior with the policy editor. It seems to be very easy to completely remove the Shutdown button from the start menu. But I couldn't find an entry to turn on such a Yes/No dialog.

  Read the article

• How to tell Linux to explicitly swap out main memory of suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

• Computer turns on and off very quickly, then nothing, then works?

  - by hellohellosharp

  The strange nature of this problem is what is stumping me. I built my computer about 7 months ago using all new parts off of Newegg (not a kit or anything). One day, I wake up and turn on my computer. I press the power button and it turns on, but then back off after half a second. I press the power button again, this time nothing. I continue pressing the power button while at the same time turning the power supply on and off (to try and reset things). The power button still does nothing. But then, after about 5 minutes, WALLAH, it works just fine like nothing was ever wrong. It goes for an entire week working just fine. Then, one morning, the entire process starts again. I press the power button and it comes on and then right back off. I press the power button several times and nothing happens, and then it works again after a couple minutes of trying. What is going on with my computer?

  Read the article

• Games on windows 8 in bootcamp lag even on lowest graphics

  - by Jackson Gariety

  I've been playing Crysis 2 and Skyrim on my Retina MacBookPro (10,1) for months now. The two games used to run super smoothly even on nearly maxed out settings. This laptop has an Nvidia GeForce GT 650M graphics card inside, it runs great. But I recently replaced my Windows 8 consumer preview with the retail copy, and since then, 3D games lag in this odd way, no matter what the graphics settings. Every second Skyrim and Crysis alternates between running smoothly and lagging. It's a cyclical lag that comes and goes like clockwork. I can turn the graphics down to 800x600 with no antialiasing and low texture quality, and it runs much smoother on the "up" motion of the cycle, but every second it moves back into this lag spike. I've tried installing beta graphics drivers, re installing the operating system, re installing the bootcamp support software, and freeing up space (I have about 20 GB free). I can't figure out what suddenly caused this other than some obscure difference between the consumer preview and the retail version. What can I try? Is my video card failing? Are there some other drivers I can install? This isn't normal lag from maxing out the card, it

  Read the article

• How does voltage fluctuation affect a laptop

  - by user45535

  I own an Acer Aspire 3680. In the past 2 years, I have given, my laptop for service due to the same kind of problem. Last year at the same time, I gave my laptop to the service center. They repaired it and I managed to ask them this question: Why does this problem happen. How can I prevent it? They said, that due to voltage fluctuations, something has gone wrong in your laptop. They actually were hesistant in mentioning as to which part they changed/repaired. Now recently the same problem happened and again I gave it to a service center to get it repaired and they also said, this is caused due to voltage fluctuation. My Question is: Due to Voltage fluctuation which part of the laptop can get affected. How can I prevent this from happening. Laptop Symptoms before I gave to service: When I plug in the adapter for charging the Green Light blinks and the laptop doesn't turn on. Neither does the charging indicator indicates the light, while charging.

  Read the article

• Why does pulling the power cord then pressing the power button fix a non-booting PC?

  - by sidewaysmilk

  I've been working at this institution for about 6 years. One thing thing that I've always found curious is that sometimes—especially after a power outage—we find a PC that won't boot when the power button is pressed. Usually, the fans will spin up, but it won't POST. Our solution is to pull the power cord, press the power button with the computer unplugged, then plug it in and turn it on. It seems more common with Gateway brand PCs than the Dells or HPs that we have around. Does anybody know what pressing the power button does when the computer is unplugged? I have some vague notion that closing the power button circuit allows some capacitors to discharge or something, but I'd like a firmer answer to offer my users when they ask me what I'm doing. My best guess as to why fans can spin but it can't POST is that the BIOS is in some non-functional state. I don't know how BIOS stores state, but my best guess is that there is some residual garbage in its registers or something, like the stack pointer isn't starting at 0 maybe?

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by user57019

  I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >