Search Results

Search found 952 results on 39 pages for '443'.

Page 19/39 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Configuring Nginx SSL alongside non-ssl

    - by user55145
    I'm trying to enable SSL on my current Nginx configuration, which works fine. However I'm wondering if it's possible to do this alongside HTTP, so that i do not need another server{} section which would just be a replication of the http section. I thought the following would work, however i get the below when accessing http:// 400 Bad Request The plain HTTP request was sent to HTTPS port Nginx Config: ssl_certificate /etc/nginx/ssl/domains.pem; ssl_certificate_key /etc/nginx/ssl/server.key; server { listen 80; listen 443; //other configuration }

    Read the article

  • how to pass traffic for port 80 not through openvpn?

    - by moti
    Is there a way to configure OpenVPN clients to route traffic for HTTP port 80 and HTTPS port 443 directly (i.e. not through the VPN), but through the regular default gateway the clients have. All other traffic should go through the VPN. My client is running OpenVPN on Windows and my current configuration looks like this: client dev tun proto tcp remote my-server-2 1194 resolv-retry infinite nobind persist-key persist-tun ca ../keys/ca.crt cert ../keys/client1.crt key ../keys/client1.key ns-cert-type server verb 3 route-metric 1 show-net-up dhcp-renew dhcp-release route-delay 0 120 hand-window 180 management localhost 13010 management-hold management-query-passwords management-forget-disconnect management-signal auth-user-pass

    Read the article

  • tcpdump selective acknowledgements question

    - by wlaus
    Hi All, I eventually sometimes watch most initial tcp connection attempts like this: tcpdump -nn -Z somepcapuser not src host (12x.x5.109.xxx or 62.75.160.xxx ) and not (port 9001 or 443 or 8080 ) and tcp[tcpflags]&(tcp-syn) !=0 and not tcp[tcpflags]& (tcp-ack) !=0 or icmp this works pretty well to quickly identify oddness so far. However, I now have a question on the following output: 03:53:52.227884 IP 203.81.166.20.53786 62.75.160.xxx.80: S 846930886:846930886(0) win 61690 "<"mss 1460,nop,nop,sackOK,opt-178:f04700000000,nop,wscale 4"" I wonder what the marked portion means, haven't seen that before. Thanks for help wlaus

    Read the article

  • Remote servlet by mod_jk ?

    - by marioosh.net
    I have remote servlet for example: h*tps://[ip_address]/servlet (h*tps://[ip_address]/ - Tomcat main page) that i need to configure on local Apache HTTPd server. My mod_jk configuration looks like below, but doesn't work. Something works, because when i type h*tps://localhost/console in a browser i get Tomcat error page "HTTP Status 404 - /console/". JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkMount /console/* ajp13 workers.properties: worker.ajp13.type=ajp13 worker.ajp13.host=[ip_address] worker.ajp13.port=8009 Remote Tomcat is configured good i think - listen on port 8009 and servlet h*tps://[ip_address]/servlet works too. <Connector port="8009" protocol="AJP/1.3" redirectPort="443" /> Anybody helps ?

    Read the article

  • Nginx .zip files return 404

    - by Kenley Tomlin
    I have set up Nginx as a reverse proxy for Node and to serve my static files and user uploaded images. Everything is working beautifully except that I can't understand why Nginx can't find my .zip files. Here is my nginx.conf. user nginx; worker_processes 1; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include mime.types; proxy_cache_path /var/www/web_cache levels=1:2 keys_zone=ooparoopaweb_cache:8m max_size=1000m inactive=600m; sendfile on; upstream *******_node { server 172.27.198.66:8888 max_fails=3 fail_timeout=20s; #fair weight_mode=idle no_rr } upstream ******_json_node { server 172.27.176.57:3300 max_fails=3 fail_timeout=20s; } server { #REDIRECT ALL HTTP REQUESTS FOR FRONT-END SITE TO HTTPS listen 80; server_name *******.com www.******.com; return 301 https://$host$request_uri; } server { #MOBILE APPLICATION PROXY TO NODE JSON listen 3300 ssl; ssl_certificate /*****/*******/json_ssl/server.crt; ssl_certificate_key /*****/******/json_ssl/server.key; server_name json.*******.com; location / { proxy_pass http://******_json_node; proxy_redirect off; proxy_set_header Host $host ; proxy_set_header X-Real-IP $remote_addr ; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for ; proxy_set_header X-Forwarded-Proto https; client_max_body_size 20m; client_body_buffer_size 128k; proxy_connect_timeout 90s; proxy_send_timeout 90s; proxy_read_timeout 90s; proxy_buffers 32 4k; } } server { #******.COM FRONT-END SITE PROXY TO NODE WEB SERVER listen 443 ssl; ssl_certificate /***/***/web_ssl/********.crt; ssl_certificate_key /****/*****/web_ssl/myserver.key; server_name mydomain.com www.mydomain.com; add_header Strict-Transport-Security max-age=500; location / { gzip on; gzip_types text/html text/css application/json application/x-javascript; proxy_pass http://mydomain_node; proxy_redirect off; proxy_set_header Host $host ; proxy_set_header X-Real-IP $remote_addr ; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for ; proxy_set_header X-Forwarded-Proto https; client_max_body_size 20m; client_body_buffer_size 128k; proxy_connect_timeout 90s; proxy_send_timeout 90s; proxy_read_timeout 90s; proxy_buffers 32 4k; } } server { #ADMIN SITE PROXY TO NODE BACK-END listen 80; server_name admin.mydomain.com; location / { proxy_pass http://mydomain_node; proxy_redirect off; proxy_set_header Host $host ; proxy_set_header X-Real-IP $remote_addr ; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for ; client_max_body_size 20m; client_body_buffer_size 128k; proxy_connect_timeout 90s; proxy_send_timeout 90s; proxy_read_timeout 90s; proxy_buffers 32 4k; } } server { # SERVES STATIC FILES listen 80; listen 443 ssl; ssl_certificate /**/*****/server.crt; ssl_certificate_key /****/******/server.key; server_name static.domain.com; access_log static.domain.access.log; root /var/www/mystatic/; location ~*\.(jpeg|jpg|png|ico)$ { gzip on; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/rss+xml text/javascript image/svg+xml application/vnd.ms-fontobject application/x-font-ttf font/opentype image/png image/jpeg application/zip; expires 10d; add_header Cache-Control public; } location ~*\.zip { #internal; add_header Content-Type "application/zip"; add_header Content-Disposition "attachment; filename=gamezip.zip"; } } } include tcp.conf; Tcp.conf contains settings that allow Nginx to proxy websockets. I don't believe anything contained within it is relevant to this question. I also want to add that I want the zip files to be a forced download.

    Read the article

  • Forcing logon to Air Watch server upon joining wifi

    - by DKNUCKLES
    I'm setting up a wireless controller that I would like to leave as unsecured. When a user connects to this network they need to be forwarded to a specific page where they can authenticate with the Air Watch system they have in place. Once authentication takes place, a profile will be downloaded to their device and we can administer the devices accordingly. I'm mulling over how I can force the page to the user when they log in. The methodology I'm thinking about working with is creating a NAT rule for that VSC that would forward all port 80 and 443 traffic to the airwatch server. Once they authenticate, a profile will be downloaded which will connect the devices to an Virtual Access Point who's SSID isn't broadcasted. Is this methodology correct or can someone think of an easier / more efficient way of accomplishing this? The controller is an HP MSM720 for what it's worth.

    Read the article

  • All traffic is passed through OpenVPN although not requested

    - by BFH
    I have a bash script on a Ubuntu box which searches for the fastest openvpn server, connects, and binds one program to the tun0 interface. Unfortunately, all traffic is being passed through the VPN. Does anybody know what's going on? The relevant line follows: openvpn --daemon --config $cfile --auth-user-pass ipvanish.pass --status openvpn-status.log There don't seem to be any entries in iptables when I enter sudo iptables --list. The config files look like this: client dev tun proto tcp remote nyc-a04.ipvanish.com 443 resolv-retry infinite nobind persist-key persist-tun persist-remote-ip ca ca.ipvanish.com.crt tls-remote nyc-a04.ipvanish.com auth-user-pass comp-lzo verb 3 auth SHA256 cipher AES-256-CBC keysize 256 tls-cipher DHE-RSA-AES256-SHA:DHE-DSS-AES256-SHA:AES256-SHA There is nothing in there that would direct everything through tun0, so maybe it's a new vagary of Ubuntu? I don't remember this happening in the past.

    Read the article

  • Hosting 2 different SSL domains on the same IP [closed]

    - by Jim
    Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have 2 different domains, domain1.com and domain2.net. Both require SSL certificates. I've got the certificates signed by a CA and now need to set them up on Apache. I've got a single IP address and have found a post here: SSL site not using the correct IP in Apache and Ubuntu that apparently works for ubuntu but I am on CentOS and have not had the same luck trying that configuration. When I try that configuration, Apache dies telling me that the port is already in use: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443 I had SSL working for a single domain but now that I've added the second, I get a browser warning about the cert not belonging to the domain. How do I get both domains to work using virtual host containers?

    Read the article

  • Switch HTTP Virtual Host to HTTPS Virtual Host

    - by Kumar
    We are using apache web server with RHEL 6.4. Currently we configured Name based virtual host on server. Enabled "Namebased Virtualhost *:80" and created /etc/httpd/conf.d/example-com.conf <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/vhost/example.com/public_html ServerName www.example.com ServerAlias example.com ErrorLog /var/log/httpd/vhosts/example-com-error_log CustomLog /var/log/httpd/vhosts/example-com-access_log common </VirtualHost> I've located my ssl certificates by /etc/httpd/conf.d/ssl.conf In this case how can I switch 80 site to 433 and also redirect all requests to 80 to 443

    Read the article

  • How should I remotely manage Dell Poweredge 2850 running Ubuntu server?

    - by Saul
    First I've got to say I'm a Linux / Ubuntu novice, so go gentle on me as I'm on day 3. I've managed to get Ubuntu server Ubuntu 8.04 LTS installed and running on the Poweredge 1850 I bought off ebay. The box will go in a rack at my office but I want to be able to work on it and power on and off from home and I gather that (maybe) IPMI over LAN might be the way to do this, or maybe its something to do with BMC or something? I want to be able to administer/manage from a client PC at home running XP. I will be configuring the office router to port forward port 80 and 443 to the Ubuntu server running Apache2, and I'm puzzled about how the remote management works (unless it comes on a different port forwarded to a different internal IP) Thanks for any help

    Read the article

  • SSL Proxy: Forwarding without the encryption

    - by John
    I have a python application listening on port 9001 for HTTP traffic. I'm trying to configure Apache (or anything, really) to listen on port 443 for HTTPS connections, and then forward the connection, sans encryption, to port 9001 on the same machine. My application would then reply via the proxy, where the encryption would be reapplied, and returned to the client transparently. I'm not doing anything crazy with the site names and SSL certs, I have one public IP, one hostname, and one SSL cert. Stripping the encryption at the proxy doesn't seem to be a common requirement. Is what I'm asking for a normal requirement? Are there other concerns with this sort of configuration?

    Read the article

  • HTTPS is not working in transparent proxy with Squid

    - by Supratik
    Hi I am using Squid proxy 3.1, all systems in the LAN connects to the internet through proxy. Direct connection is blocked using the iptables from the gateway server. There are some devices which does not have options for auto proxy or manual proxy and can only connect to the internet directly. So I enabled transparent proxy in Squid and redirected packets for port 80 and 443 to Squid proxy using iptables. Now the problem is it is working fine for HTTP port but HTTPS is not working. It is throwing "ssl_error_rx_record_too_long" error. If it is not possible through transparent proxy can you please suggest me another solution. Warm Regards Supratik

    Read the article

  • nginx + varnish + apache differente IPs in VirtualHost Apache

    - by zeusgod
    Hi, My idea is put NGINX as proxy to redirect to Varnish (cache static content) and then proxy to apache with a lot of VirtualHost in different IPs. My problems is that I would know how can configure Varnish to send access to correct IP, I am going explain: NGINX: Listen in: 10.10.10.10, 20.20.20.20 and 30.30.30.30 on ports: 80 and 443 Proxy redirect to Varnish 10.10.10.10:8080, 20.20.20.20:8080 and 30.30.30.30:8080 Varnish: Port: 8080 - THIS IS THE PROBLEM Proxy content not static to Apache on port 8000 - THIS IS THE OTHER PROBLEM Apache2: Listen in: 10.10.10.10:8000, 20.20.20.20:8000 and 30.30.30.30:8000 Response correct VirtualHost This is the idea. When I try with one IP only, all work correctly, because Varnish is only listen in one IP and port and send to backend in one IP and port too. Could you help me to configure Varnish or there is a best way to configure similar scenario please?

    Read the article

  • Enable fastcgi on SSL Virtualhost

    - by ggstevens
    Debian 7.5 My VirtualHost for port 80 works fine with the ifmodule for fastcgi. However, it does not work with the VirtualHost for port 443. SSL/https:// was working fine until I added the following: <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -socket /var/run/php5-fpm.sock -pass-header Authorization </IfModule> When I try to restart Apache I get an error: Reloading web server config: apache2 failed! However, if I remove the FastCgiExternalServer line, it works.

    Read the article

  • Big IP F5 outbound HTTP issues

    - by mbuk2k
    We've tried upgrading from 9.x to 10.2 on our F5 Big IP 3400 and everything went over fine apart from one thing. We're unable to establish any outbound HTTP (80) connections from any servers that are assigned to a virtual server. This is something that worked before and is required for certain calls our servers need to make. Interestingly HTTPS (443) connections work fine, it's literally just anything outbound over port 80 seems to fail. Does anyone know if anything has changed between 9.4 and 10.2 that would mean additional config would need to be made to allow for external HTTP connections? Any advice would be appreciated, thank you

    Read the article

  • phpmyadmin port change?

    - by Rajat
    How do i change my default phpmyadmin port to 443 or 9999? Is it possible or do I have use port 80 only? If possible, then how do I change share the same? Apache is listening on port 9999 for sure. However, going to URL http://<webserver>:9999/phpmyadmin/ Will give following error (with Firefox browser) An error occurred during a connection to webserver:9999. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) Anyone has any clue what is going on?

    Read the article

  • Export SSL Cert from IIS and import into GlassFish keystore

    - by Tim H
    What I need: I have an existing SSL certificate installed on IIS 6. On the same machine, I have GlassFish installed and would like to share the same certificate since they both share the same hostname, and they use different ports: IIS uses 443 and GlassFish uses 8181. Why I need it: Reuse existing SSL certs from IIS to GlassFish. I imagine that this is possible. I am able to install an SSL cert into GlassFish's keystore, and then import the same exact cert into IIS. I just want to go the other way - imagine having an SSL cert on IIS being used for months, and now I want to enable SSL on GlassFish. What I have done: Created a keystore with an alias: server.hostname.com Imported intermediate CA certs associated with the existing SSL Cert Imported the existing SSL cert with the same alias: server.hostname.com, but the keytool won’t allow this, as it is not associated: keytool error: java.lang.Exception: Public keys in reply and keystore don't match Why? Using a different alias causes the cert to not be trusted in the CA chain.

    Read the article

  • Dummy/default page for apache

    - by Ency
    I'm trying to set up default page for my apache2, for following cases: User is accessing http://IP_Address instead of hostname Requested protocol (HTTP/HTTPS) is not available (eg. only http*s*://domain.com exists) Currently I've got something like that <VirtualHost eserver:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/local/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> </VirtualHost> I think, it works well, i'm trying to do similar thing for HTTPS, but it does not work. <VirtualHost eserver:443> SSLCertificateKeyFile /etc/apache2/ssl/dummy.key SSLCertificateFile /etc/apache2/ssl/dummy.crt SSLProtocol all SSLCipherSuite HIGH:MEDIUM ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn ServerSignature Off </VirtualHost> My default is places in sites-enabled as a first one 000-default I do not care about not certificate validity during accessing default page, my goal is not show different HTTPS page if user one of points is applied

    Read the article

  • Different settings for secure & non-secure versions of Django site using WSGI

    - by Jordan Reiter
    I have a Django website where some of the URLs need to be served over HTTPS and some over a normal connection. It's running on Apache and using WSGI. Here's the config: <VirtualHost example.org:80> ServerName example.org DocumentRoot /var/www/html/mysite WSGIDaemonProcess mysite WSGIProcessGroup mysite WSGIScriptAlias / /path/to/mysite/conferencemanager.wsgi </VirtualHost> <VirtualHost *:443> ServerName example.org DocumentRoot /var/www/html/mysite WSGIProcessGroup mysite SSLEngine on SSLCertificateFile /etc/httpd/certs/aace.org.crt SSLCertificateKeyFile /etc/httpd/certs/aace.org.key SSLCertificateChainFile /etc/httpd/certs/gd_bundle.crt WSGIScriptAlias / /path/to/mysite/conferencemanager_secure.wsgi </VirtualHost> When I restart the server, the first site that gets called -- https or http -- appears to select which WSGI script alias gets used. I just need a few settings to be different for the secure server, which is why I'm using a different WSGI script. Alternatively, it there's a way to change settings in the settings.py file based on whether the connection is secure or not, that would also work. Thanks

    Read the article

  • Remove all HTTP bindings from an IIS 6 site while leaving SSL bindings

    - by MikeBaz
    We have a (remote, via a reseller) customer who configured their IIS6 server to not have any port 80 HTTP bindings, only port 443 SSL bindings. We would like to reproduce this without going through the three layers (!) to get to the customer to test some error scenerios. However, whenever I try to get IIS to not listen on IIS at all, I can't do it. If I do it in the UI, either leaving in the main properties page, or in the advanced bindings page, the UI does not let me proceed. If I remove the HTTP ServerBindings from the metabase.xml directly, IIS makes it port 80, all unassigned addresses anyway. Is there a way to get to the "SSL only" state naturally? Please note I am NOT talking about the "require SSL" checkbox or underlying metabase setting, as that still listens on port 80 (or whatever) to give the "SSL required" error message. I'm talking about not having any bindings listed at all for HTTP.

    Read the article

  • Can I port forward to an established reverse ssh tunnel

    - by Ben Holness
    I have three computers, A, B and C A has initiated a reverse ssh tunnel to B: ssh -nTNx -p 443 -R 22222:localhost:22 [user]@[server] If I log in to B, I can use 'ssh -p 22222 localhost' and I get a login prompt for A. If I try 'ssh -p 22222 [public IP of B]', it doesn't work What I would like to be able to do is have C connect to A without needing to login to B. So from C I could 'ssh -p 22222 [public IP of B]' and I would get the login prompt for A. I am using debian and shorewall and I have a basic understanding of how things work. I have tried various combinations of REDIRECT and DNAT rules, but haven't had any luck. I have tried using the same port (22222) and a different port (forwarding 22223 from C to 22222 on localhost). Any ideas? Cheers, Ben

    Read the article

  • Apache Reverse Proxy server and SSL NTLM SharePoint

    - by user50211
    Hi, I'm trying to set Apache as proxy server to an internal SharePoint server. I have previously configured Apache to run as a proxy server to export internal webpages and web applications. However, the Sharepoint is using SSL and NTLM authentication, and this is new to me :( I have tried many options, the traffic seems to be forwared as I get the authentication popup window, but when I insert the user/pass, I get back to the same popup window. Anybody has configured Apache to do so? Here is a part of my httpd.conf: <VirtualHost *:443> ServerName repository.out.com SSLProxyEngine On RequestHeader set Front-End-Https "On" ProxyRequests Off ProxyPreserveHost On ProxyPass / https://sharepoint.in.com ProxyPassReverse / https://sharepoint.in.com CacheDisable * SetEnv force-proxy-request-1.0 1 SetEnv proxy-nokeepalive 1 ErrorLog logs/jlanza_log CustomLog logs/jlanza_log common </VirtualHost>

    Read the article

  • Does openssl errno 104 mean that SSLv2 is disabled?

    - by David
    I want to check if my server has SSLv2 disabled. I am doing this by attempting to connect remotely with openssl with the following shell command. openssl s_client -connect HOSTNAME:443 -ssl2 Most literature I could find on the Internet says if I see something similar to the following error then SSLv2 is properly disabled. 29638:error:1407F0E5:SSL routines:SSL2_WRITE:ssl handshake failure:s2_pkt.c:428: I do get the above error when connecting to my Ubuntu server with SSLv2 disabled in Apache Apache but when I connect to my Windows Server 2008 R2 server with SSLv2 disabled in the registry I get the following output and error. CONNECTED(00000003) write:errno=104 I can't find any literature explaining this output and error. If anybody could explain to me if and why this output and error means that SSLv2 is properly disabled, I would appreciate it. Thanks!

    Read the article

  • NMap route determination on Windows 7 x64

    - by user30772
    C:\Windows\system32>nmap --iflist Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 06:51 Central Daylight Time ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MTU MAC eth0 (eth0) fe80::797f:b9b6:3ee0:27b8/64 ethernet down 1500 5C:AC:4C:E9:2D:46 eth0 (eth0) 169.254.39.184/4 ethernet down 1500 5C:AC:4C:E9:2D:46 eth1 (eth1) fe80::5c02:7e48:8fbe:c7c9/64 ethernet down 1500 00:FF:3F:7C:7C:2B eth1 (eth1) 169.254.199.201/4 ethernet down 1500 00:FF:3F:7C:7C:2B eth2 (eth2) fe80::74e4:1ab7:1b7d:a0d0/64 ethernet up 1500 14:FE:B5:BA:8A:C3 eth2 (eth2) 10.0.0.0.253/24 ethernet up 1500 14:FE:B5:BA:8A:C3 eth3 (eth3) fe80::b03e:ddf5:bb5c:5f76/64 ethernet up 1500 00:50:56:C0:00:01 eth3 (eth3) 169.254.95.118/16 ethernet up 1500 00:50:56:C0:00:01 eth4 (eth4) fe80::b175:831d:e60:27b/64 ethernet up 1500 00:50:56:C0:00:08 eth4 (eth4) 192.168.153.1/24 ethernet up 1500 00:50:56:C0:00:08 lo0 (lo0) ::1/128 loopback up -1 lo0 (lo0) 127.0.0.1/8 loopback up -1 tun0 (tun0) fe80::100:7f:fffe/64 point2point down 1280 tun1 (tun1) (null)/0 point2point down 1280 tun2 (tun2) fe80::5efe:a9fe:5f76/128 point2point down 1280 tun3 (tun3) (null)/0 point2point down 1280 tun4 (tun4) fe80::5efe:c0a8:9901/128 point2point down 1280 tun5 (tun5) fe80::5efe:ac14:fd/128 point2point down 1280 DEV WINDEVICE eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth0 \Device\NPF_{0024872A-5A41-42DF-B484-FB3D3ED3FCE9} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth1 \Device\NPF_{3F7C7C2B-9AF3-45BB-B96E-2F00143CC2F7} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth2 \Device\NPF_{08116FE5-F0FF-498A-9BF1-515528C57C13} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth3 \Device\NPF_{AA83C6CE-AB2E-4764-92D1-CDEAFBA7AD21} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} eth4 \Device\NPF_{D0679889-E9D4-411D-BDC5-F4DDB758E151} lo0 <none> lo0 <none> tun0 <none> tun1 <none> tun2 <none> tun3 <none> tun4 <none> tun5 <none> **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 JMeterX - I worded that way in hopes of raising answer efficnecy, but that probably wasnt the smartest choice. IMHO the problem (could be a symptom) is that nmap retardedly chooses eth0 as the gateway interface for any and all networks. Here's the result: C:\Windows\system32>nmap 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:43 Central Daylight Time Note: Host seems down. If it is really up, but blocking our ping probes, try -Pn Nmap done: 1 IP address (0 hosts up) scanned in 0.95 seconds C:\Windows\system32>nmap -e eth2 10.0.0.55 Starting Nmap 6.01 ( http://nmap.org ) at 2012-08-31 07:44 Central Daylight Time Nmap scan report for esxy5.dionne.net (10.0.0.55) Host is up (0.00070s latency). Not shown: 991 filtered ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 427/tcp open svrloc 443/tcp open https 902/tcp open iss-realsecure 5988/tcp closed wbem-http 5989/tcp open wbem-https 8000/tcp open http-alt 8100/tcp open xprint-server MAC Address: 00:1F:29:59:C7:03 (Hewlett-Packard Company) Nmap done: 1 IP address (1 host up) scanned in 5.29 seconds Just to be clear, this is what makes absolutly no sense to me whatsoever. For reference, I've included similar info from an Ubuntu (that works normally) vm on the affected host below. Jacked Windows 7 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.153.255/32 eth0 255.255.255.255/32 eth0 255.255.255.255/32 eth0 127.0.0.1/32 eth0 127.255.255.255/32 eth0 255.255.255.255/32 eth0 169.254.95.118/32 eth0 169.254.255.255/32 eth0 10.0.0.0.253/32 eth0 255.255.255.255/32 eth0 10.0.0.0.255/32 eth0 255.255.255.255/32 eth0 192.168.153.1/32 eth0 255.255.255.255/32 eth0 10.0.0.0.0/24 eth0 192.168.153.0/24 eth0 10.10.10.0/24 eth0 10.0.0.0.4 169.254.0.0/16 eth0 127.0.0.0/8 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 224.0.0.0/4 eth0 0.0.0.0/0 eth0 10.0.0.0.1 Working Ubuntu VM root@ubuntu:~# nmap --iflist Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT ************************INTERFACES************************ DEV (SHORT) IP/MASK TYPE UP MAC lo (lo) 127.0.0.1/8 loopback up eth0 (eth0) 172.20.0.89/24 ethernet up 00:0C:29:0A:C9:35 eth1 (eth1) 192.168.225.128/24 ethernet up 00:0C:29:0A:C9:3F eth2 (eth2) 192.168.150.128/24 ethernet up 00:0C:29:0A:C9:49 **************************ROUTES************************** DST/MASK DEV GATEWAY 192.168.225.0/0 eth1 192.168.150.0/0 eth2 172.20.0.0/0 eth0 169.254.0.0/0 eth0 0.0.0.0/0 eth0 172.20.0.1 root@ubuntu:~# nmap esxy2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-08-31 07:44 PDT Nmap scan report for esxy2 (172.20.0.52) Host is up (0.00036s latency). rDNS record for 172.20.0.52: esxy2.dionne.net Not shown: 994 filtered ports PORT STATE SERVICE 80/tcp open http 427/tcp closed svrloc 443/tcp open https 902/tcp closed iss-realsecure 8000/tcp open http-alt 8100/tcp open unknown MAC Address: 00:04:23:B1:FA:6A (Intel) Nmap done: 1 IP address (1 host up) scanned in 4.76 seconds

    Read the article

  • Error while starting web application.

    - by Lalit
    0 When you right-click a Web site in the Microsoft Internet Information Services (IIS) Microsoft Management Console (MMC) snap-in, and then you click Start, the Web site does not start and you receive the following error message: The process cannot access the file because it is being used by another process. What have to do. To resolve this issue i got this solution form link http://support.microsoft.com/kb/890015 As: You must use the Netstat.exe utility at the command line to see if another process is using port 80 or port 443. But how to ensure that is these Ip are in use or not ? in terms of status ? What should its status ? Second solution is : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HTTP\Parameters\ListenOnlyList. But this key is not found .

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >