Search Results

Search found 913 results on 37 pages for '66'.

Page 19/37 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • HAProxy + NodeJS gets stuck on TCP Retransmission

    - by sled
    I have a HAProxy + NodeJS + Rails Setup, I use the NodeJS Server for file upload purposes. The problem I'm facing is that if I'm uploading through haproxy to nodejs and a "TCP (Fast) Retransmission" occurs because of a lost packet the TX rate on the client drops to zero for about 5-10 secs and gets flooded with TCP Retransmissions. This does not occur if I upload to NodeJS directly (TCP Retransmission happens too but it doesn't get stuck with dozens of retransmission attempts). My test setup is a simple HTML4 FORM (method POST) with a single file input field. The NodeJS Server only reads the incoming data and does nothing else. I've tested this on multiple machines, networks, browsers, always the same issue. Here's a TCP Traffic Dump from the client while uploading a file: ..... TCP 1506 [TCP segment of a reassembled PDU] >> everything is uploading fine until: TCP 1506 [TCP Fast Retransmission] [TCP segment of a reassembled PDU] TCP 66 [TCP Dup ACK 7392#1] 63265 > http [ACK] Seq=4844161 Ack=1 Win=524280 Len=0 TSval=657047088 TSecr=79373730 TCP 1506 [TCP Retransmission] [TCP segment of a reassembled PDU] >> the last message is repeated about 50 times for >>5-10 secs<< (TX drops to 0 on client, RX drops to 0 on server) TCP 1506 [TCP segment of a reassembled PDU] >> upload continues until the next TCP Fast Retransmission and the same thing happens again The haproxy.conf (haproxy v1.4.18 stable) is the following: global log 127.0.0.1 local1 debug maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults log global mode http option httplog option tcplog frontend http-in bind *:80 timeout client 6000 acl is_websocket path_beg /node/ use_backend node_backend if is_websocket default_backend app_backend # Rails Server (via nginx+passenger) backend app_backend option httpclose option forwardfor timeout server 30000 timeout connect 4000 server app1 127.0.0.1:3000 # node.js backend node_backend reqrep ^([^\ ]*)\ /node/(.*) \1\ /\2 option httpclose option forwardfor timeout queue 5000 timeout server 6000 timeout connect 5000 server node1 127.0.0.1:3200 weight 1 maxconn 4096 Thanks for reading! :) Simon

    Read the article

  • Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

    - by Paula
    I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

    Read the article

  • GRUB doesn't recognize partitions on one harddisk

    - by knizz
    I have a dualboot computer with Windows Vista (on hd0) and Ubuntu 9.10. The bootloader is GRUB and the windows bootloader lets me decide between Vista and Ubuntu-Installation (broken WuBi). But now (i don't know why that changed) I can't use start the windows-bootloader anymore. I tried "ls" on the grub-prompt and it gave me a list like: (hd0) (hd1) (hd1,0) (hd1,1) (hd1,2) ... (fd0) It recognizes all partitions of hd1 (the ubuntu-harddisk) but not of hd0(the win-disk). .. WHY? Here is the result of the "boot info script" for the technical details: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=a7c510e3-2399-437b-ab92-fa609e48d63f)/boot/grub. => No boot loader is installed in the MBR of /dev/sdb sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows Vista Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe /wubildr.mbr /wubildr sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb1: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: mount: unbekannter Dateisystemtyp „“ sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: Bios Boot Partition Boot sector type: - Boot sector info: sdb4: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 9.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Platte /dev/sda: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x52554d66 Partition Boot Start End Size Id System /dev/sda1 * 2,048 307,202,047 307,200,000 7 HPFS/NTFS /dev/sda2 307,202,048 1,250,258,943 943,056,896 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Platte /dev/sdb: 640.1 GByte, 640135028736 Byte 255 Köpfe, 63 Sektoren/Spuren, 77825 Zylinder, zusammen 1250263728 Sektoren Einheiten = Sektoren von 1 × 512 = 512 Bytes Disk identifier: 0x00000000 Partition Boot Start End Size Id System /dev/sdb1 1 1,250,263,727 1,250,263,727 ee GPT GUID Partition Table detected. Partition Start End Size System /dev/sdb1 34 262,177 262,144 Microsoft Windows /dev/sdb2 262,178 1,131,253,933 1,130,991,756 Linux or Data /dev/sdb3 1,131,253,934 1,131,255,887 1,954 Bios Boot Partition /dev/sdb4 1,131,255,888 1,245,312,528 114,056,641 Linux or Data /dev/sdb5 1,245,312,529 1,250,263,694 4,951,166 Linux Swap blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 AE1440441440122F ntfs /dev/sda2 3AE66E4DE66E0A09 ntfs data /dev/sdb2 5419D16119DAA4DE ntfs LaufwerkD /dev/sdb4 a7c510e3-2399-437b-ab92-fa609e48d63f ext4 /dev/sdb5 60a0143a-e01b-450a-bbd1-f22059e47b65 swap ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb4 / ext4 (rw,errors=remount-ro) =========================== sdb4/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s /boot/grub/grubenv ]; then have_grubenv=true load_env fi set default="0" if [ ${prev_saved_entry} ]; then saved_entry=${prev_saved_entry} save_env saved_entry prev_saved_entry= save_env prev_saved_entry fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi if [ ${recordfail} = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/white ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry "Ubuntu, Linux 2.6.31-20-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-20-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-20-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-20-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro quiet splash initrd /boot/initrd.img-2.6.31-14-generic } menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi insmod ext2 set root=(hd1,4) search --no-floppy --fs-uuid --set a7c510e3-2399-437b-ab92-fa609e48d63f linux /boot/vmlinuz-2.6.31-14-generic root=UUID=a7c510e3-2399-437b-ab92-fa609e48d63f ro single initrd /boot/initrd.img-2.6.31-14-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" { insmod ntfs set root=(hd0,1) search --no-floppy --fs-uuid --set ae1440441440122f chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### =============================== sdb4/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 # / was on /dev/sdb4 during installation UUID=a7c510e3-2399-437b-ab92-fa609e48d63f / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb5 during installation UUID=60a0143a-e01b-450a-bbd1-f22059e47b65 none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 =================== sdb4: Location of files loaded by Grub: =================== 583.8GB: boot/grub/core.img 583.8GB: boot/grub/grub.cfg 579.7GB: boot/initrd.img-2.6.31-14-generic 580.0GB: boot/initrd.img-2.6.31-20-generic 579.7GB: boot/vmlinuz-2.6.31-14-generic 579.8GB: boot/vmlinuz-2.6.31-20-generic 580.0GB: initrd.img 579.7GB: initrd.img.old 579.8GB: vmlinuz 579.7GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sdb1 00000000 54 34 dc 3b 8b ff 6c fa 3e 59 3d 24 25 af 5f 9b |T4.;..l.>Y=$%._.| 00000010 72 f8 36 3d 56 30 22 fd c6 08 5e 39 7f dc 29 48 |r.6=V0"...^9..)H| 00000020 48 e5 24 52 77 b0 fc 64 b6 ce 48 c3 07 ce b5 81 |H.$Rw..d..H.....| 00000030 06 68 60 4f 6e fb 83 92 df 3a 54 b9 df 21 2a cd |.h`On....:T..!*.| 00000040 1e 2f e2 49 fe cf 81 2d 52 17 1a 4e 66 b4 f3 f0 |./.I...-R..Nf...| 00000050 41 25 e3 96 26 28 fe 19 61 72 75 f8 40 a3 b7 ef |A%..&(..aru.@...| 00000060 5f 79 dc cb 28 44 44 7c 9b 9a 7b 6c 4b 4b 60 0f |_y..(DD|..{lKK`.| 00000070 a9 97 87 bc 85 9f db bb d2 1a 88 9f aa 49 18 d5 |.............I..| 00000080 92 2d db 7e fe f7 8d 7a 18 c0 33 c5 bd 7a 46 07 |.-.~...z..3..zF.| 00000090 c8 27 13 66 94 49 62 9f bc 99 56 55 25 fb 94 a9 |.'.f.Ib...VU%...| 000000a0 3f b2 a7 0a 87 d0 a4 4e 51 f1 09 02 c4 29 eb ff |?......NQ....)..| 000000b0 26 3b 51 3e 5a 0c db ee a6 57 a7 c3 ba a1 74 90 |&;Q>Z....W....t.| 000000c0 ee 70 08 18 cc b8 d0 22 ce 96 c7 cb 68 40 98 20 |.p....."....h@. | 000000d0 49 3d 07 ec df d1 8d cf 19 bc 42 90 70 24 01 b4 |I=........B.p$..| 000000e0 28 cf c6 50 d3 95 5a 1b 18 15 33 c7 b2 a8 95 92 |(..P..Z...3.....| 000000f0 bb 93 fe 18 2b 81 c1 6b 9c 30 f1 65 50 6a 80 3d |....+..k.0.ePj.=| 00000100 74 37 a8 59 a6 51 8a 63 b6 d8 16 9f a9 47 2a 7c |t7.Y.Q.c.....G*|| 00000110 04 a7 fe 69 47 02 bf e9 b7 1b 7a ea 60 5c 3c 53 |...iG.....z.`\<S| 00000120 5b 10 78 dc 4d d2 a8 22 30 45 37 fb 56 06 9f 06 |[.x.M.."0E7.V...| 00000130 aa df cf 87 3a 3e cf 72 f2 e5 a6 c6 aa e2 7c 1c |....:>.r......|.| 00000140 64 c2 fc 80 ce 02 fc 7f 0f c6 60 81 bf cd 3b 5a |d.........`...;Z| 00000150 37 a5 38 1b 0c 1b 39 2e d6 f6 3d a2 36 e5 87 c3 |7.8...9...=.6...| 00000160 17 b5 fd ee 33 c7 ce a3 d9 c2 57 dc ee 85 48 9d |....3.....W...H.| 00000170 33 60 02 cd c5 83 44 44 ea b6 07 25 0a 4b a6 6e |3`....DD...%.K.n| 00000180 fc 51 42 cd 84 0b 65 b6 19 a1 e5 b2 eb 14 0c fa |.QB...e.........| 00000190 24 77 f5 44 6e 5d 39 dd b6 8e cc f8 30 fe 21 46 |$w.Dn]9.....0.!F| 000001a0 9c ff 95 c6 c7 b5 0a df 54 ca d2 ac bc 64 d0 97 |........T....d..| 000001b0 94 54 d9 29 0f 91 60 20 c3 e4 53 c2 b0 e4 40 72 |.T.)..` ..S...@r| 000001c0 7e 25 bc 81 06 ad 05 46 14 a7 e6 71 6b 5c db 9c |~%.....F...qk\..| 000001d0 0a 5e 76 23 ae 06 01 36 98 21 65 2c 90 e7 4b 1a |.^v#...6.!e,..K.| 000001e0 2a 2d 80 a5 48 db 9e 14 e0 9f e9 aa 00 e3 77 32 |*-..H.........w2| 000001f0 0f fd 94 db 55 a6 64 46 be ae ca de da ee 89 68 |....U.dF.......h| 00000200 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde

    Read the article

  • Not Able To Connect to Windows Server 2008 R2 using FileZilla Externally

    - by obautista
    I configured FTP Service/Role on my Windows Server 2008 R2 machine. I am able to connect from the inside, but not from the outside. On the inside I tested using cmd prompt and IE FTP. On the outside, I am testing with FileZilla and IE FTP. From the outside, IE FTP prompts me to enter my username/pwd, but nothing happens. Page eventually times out and I get "Internet Explorer cannot display page". Using FileZilla, I get the following messages. Note FileZilla resolved domain name and authenticates. I did not configure FTP Wirewall Support on the FTP site. I am not sure if I need to do this. I set up basic authentication, non-ssl, not allowing anonymous. I testing with Windows Firewall Turned off and on (I added windows firewall rule for port 21). On my network firewall (Cisco), I added a rule to forward port 21 traffic to FTP Server. Status: Resolving address of ftp.technologyblends.com Status: Connecting to 75.149.66.201:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER * Response: 331 Password required for . Command: PASS *** Response: 230 User logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: LANG EN* Response: UTF8 Response: AUTH TLS;TLS-C;SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: CCC Response: HOST Response: SIZE Response: MDTM Response: REST STREAM Response: 211 END Command: OPTS UTF8 ON Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing

    Read the article

  • Google Public DNS is not used in trace route

    - by IT researcher
    In my PC i am using google public DNS as DNS server.In Internet protocol(TCP/IP) properties i have set Preferred DNS server as 8 8 4 4 and Alternate DNS server as 8 8 8 8. According to me this DNS server should be used to resolve any request to website to its IP by using this DNS servers.(see google DNS and How Domain Name Servers Work). But when i checked trace route to a website in my PC i got following Tracing route to www.google.com [74.125.236.80] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.201 2 360 ms 349 ms 292 ms 122.178.216.1 3 145 ms 107 ms 148 ms 122.166.32.121 4 32 ms 53 ms 120 ms 122.166.32.9 5 45 ms 42 ms 121 ms 122.175.255.29 6 63 ms 76 ms 51 ms 182.79.255.45 7 52 ms 134 ms 61 ms 72.14.194.22 8 86 ms 59 ms 72 ms 72.14.232.202 9 106 ms 107 ms 60 ms 66.249.94.39 10 101 ms 103 ms 117 ms 209.85.249.235 11 148 ms 224 ms 276 ms 74.125.236.80 Trace complete. When i checked all these IP in who.is i found that it is of my ISP. So my question is where does Google public DNS is used? Also how come my ISP's nameserver is used even if i set google public dns as my dns server in my PC?(OR does my any settings are wrong)

    Read the article

  • Apache to read from /home/user/public_html on CentOS 5.7

    - by C.S.Putra
    this is my first experience using CentOS 5.7 / Linux as my web server OS and I have just finished installing Apache. Then I created a new account using WHM. The account is now created and the domain name can be accessed. I have put the web files under /home/user/public_html/ but when I access the domain assigned for that user which I assigned when creating new account in WHM, it doesn't read the files. In /usr/local/apache/conf/httpd.conf : <VirtualHost 175.103.48.66:80> ServerName domain.com ServerAlias www.domain.com DocumentRoot /home/user/public_html ServerAdmin [email protected] User veevou # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup group1 group1 </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup group1 group1 </IfModule> CustomLog /usr/local/apache/domlogs/domain.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." CustomLog /usr/local/apache/domlogs/domain.com combined ScriptAlias /cgi-bin/ /home/user/public_html/cgi-bin/ </VirtualHost> Instead of reading from /home/user/public_html/ apache will read the /var/ww/html/ folder. How to set the apache so that when user access www.domain.com, they will access the files under /home/user/public_html/ ? Please advice. Thanks

    Read the article

  • Why is mkfs overwriting the LUKS encryption header on LVM on RAID partitions on Ubuntu 12.04?

    - by Starchy
    I'm trying to setup a couple of LUKS-encrypted partitions to be mounted after boot-time on a new Ubuntu server which was installed with LVM on top of software RAID. After running cryptsetup luksFormat, the LUKS header is clearly visible on the volume. After running any flavor of mkfs, the header is overwritten (which does not happen on other systems that were setup without LVM), and cryptsetup will no longer recognize the device as a LUKS device. # cryptsetup -y --cipher aes-cbc-essiv:sha256 --key-size 256 luksFormat /dev/dm-1 WARNING! ======== This will overwrite data on /dev/dm-1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: # hexdump -C /dev/dm-1|head -n5 00000000 4c 55 4b 53 ba be 00 01 61 65 73 00 00 00 00 00 |LUKS....aes.....| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000020 00 00 00 00 00 00 00 00 63 62 63 2d 65 73 73 69 |........cbc-essi| 00000030 76 3a 73 68 61 32 35 36 00 00 00 00 00 00 00 00 |v:sha256........| 00000040 00 00 00 00 00 00 00 00 73 68 61 31 00 00 00 00 |........sha1....| # cryptsetup luksOpen /dev/dm-1 web2-var # mkfs.ext4 /dev/mapper/web2-var [..snip..] Creating journal (32768 blocks): done Writing superblocks and filesystem accounting information: done # hexdump -C /dev/dm-1|head -n5 # cryptsetup luksClose /dev/mapper/web2-var 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00000400 00 40 5d 00 00 88 74 01 66 a0 12 00 17 f2 6d 01 |.@]...t.f.....m.| 00000410 f5 3f 5d 00 00 00 00 00 02 00 00 00 02 00 00 00 |.?].............| 00000420 00 80 00 00 00 80 00 00 00 20 00 00 00 00 00 00 |......... ......| # cryptsetup luksOpen /dev/dm-1 web2-var Device /dev/dm-1 is not a valid LUKS device. I have also tried mkfs.ext2 with the same result. Based on setups I've done successfully on Debian and Ubuntu (but not LVM or Ubuntu 12.04), it's hard to see why this is failing.

    Read the article

  • Problem with wireless networking

    - by Rodnower
    Hello, I have atheros wifi hardware, intell chipset, gigabyte laptop and CentOS 5 installed. Now I try to use wireless network and get problems. First of all I want to say that I have 2 OS on my laptop, and when I load Windows XP I still may to access to the wireless network. First I try to get it on Linux was to make active wlan0 interface in: system - administration - network but I get: Determining IP information for wlan0... failed. Second I try also was unsuccessfully: [root 1 network-scripts]# ifup-wireless Error : unrecognised wireless request "off" This relevant output of iwconfig is: Warning: Driver for device wlan0 recommend version 21 of Wireless Extension, but has been compiled with version 20, therefore some driver features may not be available... wlan0 IEEE 802.11 ESSID:"" Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 {output not in the original format} The same things are happen even if I do: modprobe wlan0 (this not get error) Important to say that modprobe not succeed to find ath_pci, tharefor I decide to download latest version of the madwifi driver from http://madwifi-project.org. I extracted this, but when I make this, this is what I get: [root 1 madwifi-0.9.4]# make /bin/sh: line 0: cd: /lib/modules/2.6.18-164.el5/build: No such file or directory Makefile.inc:66: * /lib/modules/2.6.18-164.el5/build is missing, please set KERNELPATH. Stop. I tried to set KERNELPATH, but I think that it was incorrect: [root 1 madwifi-0.9.4]# make KERNELPATH=/lib/modules/2.6.18-164.el5/kernel/ /bin/sh: cc: command not found Makefile.inc:81: * Cannot detect kernel version - please check compiler and KERNELPATH. Stop. Some one have any ideas? Thank you very much for ahead.

    Read the article

  • Apache Consuming Resources

    - by Chris Edwards
    Our web server suddenly has been giving us load issues. After I restart Apache the load stays low for a few hours up to a day or so then its back up to around 3.0 until I restart Apache again. Any suggestions on tracking down what is causing this? Thanks! Chris Edwards top - 20:15:05 up 19 days, 10:59, 1 user, load average: 2.11, 2.17, 2.47 Tasks: 532 total, 6 running, 525 sleeping, 0 stopped, 1 zombie Cpu(s): 11.5%us, 0.4%sy, 0.0%ni, 88.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32842656k total, 13185872k used, 19656784k free, 6143740k buffers Swap: 1048568k total, 0k used, 1048568k free, 3515252k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 19089 apache 20 0 1912m 1.5g 6584 R 99.6 4.9 71:01.53 /usr/sbin/httpd 21136 apache 20 0 392m 55m 5736 R 95.0 0.2 0:03.45 /usr/sbin/httpd 21139 apache 20 0 374m 38m 5808 S 40.5 0.1 0:04.91 /usr/sbin/httpd 21124 apache 20 0 389m 51m 5948 R 38.9 0.2 0:03.15 /usr/sbin/httpd 21111 apache 20 0 371m 35m 5964 S 18.8 0.1 0:01.22 /usr/sbin/httpd 21127 apache 20 0 375m 39m 5832 S 17.8 0.1 0:01.66 /usr/sbin/httpd 21128 apache 20 0 374m 38m 5792 S 16.2 0.1 0:01.56 /usr/sbin/httpd 21110 apache 20 0 374m 38m 5848 S 15.9 0.1 0:01.02 /usr/sbin/httpd 21113 apache 20 0 374m 38m 5836 S 15.9 0.1 0:02.16 /usr/sbin/httpd 21077 apache 20 0 379m 43m 6408 S 11.0 0.1 0:07.22 /usr/sbin/httpd 21101 apache 20 0 384m 49m 6988 R 5.8 0.2 0:04.47 /usr/sbin/httpd 21112 apache 20 0 374m 38m 5956 R 2.6 0.1 0:01.61 /usr/sbin/httpd

    Read the article

  • How to whitelist external access to an internal webserver via Cisco ACLs?

    - by Josh
    This is our company's internet gateway router. This is what I want to accomplish on our Cisco 2691 router: All employees need to be able to have unrestricted access to the internet (I've blocked facebook with an ACL, but other than that, full access) There is an internal webserver that should be accessible from any internal IP address, but only a select few external IP addresses. Basically, I want to whitelist access from outside the network. I don't have a hardware firewall appliance. Until now, the webserver has not needed to be accessible externally... or in any case, the occasional VPN has sufficed when needed. As such, the following config has been sufficient: access-list 106 deny ip 66.220.144.0 0.0.7.255 any access-list 106 deny ip ... (so on for the Facebook blocking) access-list 106 permit ip any any ! interface FastEthernet0/0 ip address x.x.x.x 255.255.255.248 ip access-group 106 in ip nat outside fa0/0 is the interface with the public IP However, when I add... ip nat inside source static tcp 192.168.0.52 80 x.x.x.x 80 extendable ...in order to forward web traffic to the webserver, that just opens it up entirely. That much makes sense to me. This is where I get stumped though. If I add a line to the ACL to explicitly permit (whitelist) an IP range... something like this: access-list 106 permit tcp x.x.x.x 0.0.255.255 192.168.0.52 0.0.0.0 eq 80 ... how do I then block other external access to the webserver while still maintaining unrestricted internet access for internal employees? I tried removing the access-list 106 permit ip any any. That ended up being a very short-lived config :) Would something like access-list 106 permit ip 192.168.0.0 0.0.0.255 any on an "outside-inbound" work?

    Read the article

  • Change the default route without affecting existing TCP connections

    - by Patrick Horn
    Let's say I have two public network addresses on my server: one NAT through an ISP (192.168.99.0/24), and a VPN through a different ISP (192.168.1.0/24), already configured with a per-host route to the VPN server through my ISP. Here is my initial routing table. I am currently routing through my ISP on subnet 192.168.99.0/24. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.99.1 0.0.0.0 UG 0 0 0 eth1 55.66.77.88 192.168.99.1 255.255.255.255 UGH 0 0 0 eth1 192.168.99.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Now, I want new TCP connections to switch to my 192.168.1.0/24 so I type the following: $ route add -net 0.0.0.0 gw 192.168.1.1 dev tap0 When I do this, it causes some long-standing TCP connections to hang. Is there a way to I safely change the default interface for new connections, while allowing existing TCP connections to use the old route (i.e. do I need enable some sort of stateful routing table)? I am okay with a solution that only works with established TCP connections, and I don't care how hacky it is. For example, if there is a way to add temporary iptables rules for existing connections to force them over the old route. But there has to be some way to do this. EDIT: Just a note about a simple "route add -host ... " for existing connections: this solution would work if I am fine with leaving a subset of IPs on the old interface. However, in my application, this actually doesn't solve my problem because I want to allow new connections to come on the new interface even if they have the same source IP. I'm now looking at using the "ip route" command to set source-based routing rules.

    Read the article

  • Cannot access host from a virtualbox guest using bridged adapter

    - by David Dai
    I have a windows 7 host with firewall turned off. And I have a windowsXP guest running on Virtualbox 4.2.4r81684. In my windowsXP guest I tried to connect to the FTP server on my host machine(which used to work well) but it didn't work. I tried to ping my host machine, but it didn't work either. Then I tried to ping my guest from host, it worked well. my guest ip is :192.168.1.95 my host ip is : 192.168.1.9 route table on guest machine is this: C:\Documents and Settings\wenlong>route PRINT =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...08 00 27 66 54 6c ...... AMD PCNET Family PCI Ethernet Adapter #2 - Packe t Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.95 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.95 192.168.1.95 20 192.168.1.95 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.1.255 255.255.255.255 192.168.1.95 192.168.1.95 20 224.0.0.0 240.0.0.0 192.168.1.95 192.168.1.95 20 255.255.255.255 255.255.255.255 192.168.1.95 192.168.1.95 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None arp cache is this: C:\Documents and Settings\wenlong>arp -a Interface: 192.168.1.95 --- 0x2 Internet Address Physical Address Type 192.168.1.1 00-26-f2-60-3c-04 dynamic 192.168.1.9 90-e6-ba-c2-90-2f dynamic It's strange because there was no problem days before and I didn't make any changes to the setting. could anybody help? PS. the guest can communicate with other machines in the LAN(for example 192.168.1.114) ok. it just cannot connect to the host machine.

    Read the article

  • exim4 redirect mail sent to *@domain1.example.com to *@domain2.example.com

    - by nightcoder
    Current situation: We have a VPS that hosts a website example.org. Exim is configured to work as a smarthost. All emails sent through exim are successfully relayed to another mail server (that is working on example.com). Goal: To forward mail sent to *@example.org to *@example.com, i.e. change the recipient's address from *@example.org to *@example.com. Problem: If I send email to address *@example.org, then it seems exim doesn't change the address, it still relays the message to another mail server but recipient is still *@example.org. Maybe the redirect is not applied for some reason. Configuration and logs: /etc/exim4/update-exim4.conf.conf: dc_eximconfig_configtype='smarthost' dc_other_hostnames='' dc_local_interfaces='' dc_readhost='example.org' dc_relay_domains='example.org' dc_minimaldns='false' dc_relay_nets='0.0.0.0/32' dc_smarthost='example.com::26' CFILEMODE='644' dc_use_split_config='false' dc_hide_mailname='true' dc_mailname_in_oh='true' dc_localdelivery='maildir_home' /etc/exim4/conf.d/router/999_exim4-config_redirect (created by me): domain_redirect: debug_print = "R: forward for $local_part@$domain" driver = redirect domains = example.org data = [email protected] (for now data is set to a specific address for simplicity and testing) exim log when sending email to [email protected] (should be redirected to [email protected]): 2012-03-20 19:40:07 1SA4ud-0005Dw-7k <= [email protected] U=www-data P=local S=657 2012-03-20 19:40:08 1SA4ud-0005Dw-7k => [email protected] R=smarthost T=remote_smtp_smarthost H=domain2.com [184.172.146.66] X=TLS1.0:RSA_AES_256_CBC_SHA1:32 DN="C=US,2.5.4.17=#13053737303932,ST=TX,L=Houston,STREET=Suite 400,STREET=11251 Northwest Freeway,O=HostGator.com,OU=HostGator.com,OU=Comodo PremiumSSL Wildcard,CN=*.hostgator.com" 2012-03-20 19:40:08 1SA4ud-0005Dw-7k Completed So, the address is not changed :( Please help! I'm trying to make it work for half a day already :(

    Read the article

  • Problem with network policy rule in Network Policy Server

    - by Robert Moir
    Trying to configure RADIUS for a college network, and have run into the following frustration: I can't set an "AND" condition for group membership of authenticated objects in the network policy rules, e.g. I'm trying to create a NPS rule that says, essentially "IF user is a member of [list of user groups] And is authenticating from a computer in [wireless computer group] then allow access. The screenshot above is the rule I am having trouble with. It does not work as written. The rule underneath it, which is identical in every aspect except the conditions rule, does work. I've tried changing the non-working rule to define each set of groups as "Windows group" rather than specifically as machine and user groups, with no change. With the "faulty" rule enabled and the working one disabled, any attempt to login with a valid account from a machine that is in the wireless computers group gives a 6273 audit event in the windows event log: Reason code 66 - "the user attempted to use an authentication method that is not enabled on the matching network policy". Disabling the "faulty" rule, enabling the other rule and logging in with the same account and computer works just fine.

    Read the article

  • Batch deletion of smaller files from group of files via unix command line

    - by artlung
    I have a large number (more than 400) of directories full of photos. What I want to do is to keep the larger sizes of these photos. Each directory has 31 to 66 files in it. Each directory has thumbnails, and larger versions, plus a file called example.jpg I dispatched the example.jpg file easily with: rm */example.jpg I initially thought that it would be easy to delete the thumbnails, but the problem is they are not consistently named. The typical pattern was photo1.jpg and photo1s.jpg. I did rm */photo*s.jpg but it ended up some of the files named photoXs.jpg were actually larger and not smaller. Argh. So what I want to do is scan each directory for filesize and delete (or move) the thumbnails. I initially thought I'd just ls -R every file and extract the size of each file and save those under a threshold. The problem? In one directory the large will be 1.1 MB and the thumb is 200k. In another the large is 200k and the small 30k. Even worse, the files really are mostly named photo1.jpg - so simply putting them all in the same folder, sorting by size, and deleting in groups would not work without renaming already, and if it's possible I'd prefer to keep them in their folders. I was almost resolved to just doing this all manually, but then thought I'd ask here. How would you do this task?

    Read the article

  • FreeBSD slow transfers - RFC 1323 scaling issue?

    - by Trey
    I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

    Read the article

  • Haproxy not properly passing on X-Forwarded-For header

    - by JesseP
    I have backend web servers that receive requests by way of haproxy-nginx-fastcgi. The web app used to see multiple ip's coming through in the X-Forwarded-For header, chained together with commas (most original IP on the left). At some point in the recent past (just noticed, so not sure what caused it) something changed, and now I'm only seeing a single IP passed in the header to my web application. I've tried with haproxy 1.4.21 and 1.4.22 (recent upgrade) with the same behavior. Haproxy has the forwardfor header set: option forwardfor Nginx fastcgi_params config defines this header to be passed to the app: fastcgi_param HTTP_X_FORWARDED_FOR $http_x_forwarded_for; Anyone have any ideas on what might be going wrong here? EDIT: I just started logging the $http_x_forwarded_for variable in nginx logs, and nginx is only ever seeing a single IP, which shouldn't ever be the case, as we should always see our haproxy ip added in there, right? So, issue must either be in nginx handling of the variable coming in, or haproxy not building it properly. I'll keep digging... EDIT #2: I enabled request and response header logging in HAProxy, and it is not spitting anything out for X-Forwarded-For, which seems very odd: Oct 10 10:49:01 newark-lb1 haproxy[19989]: 66.87.95.74:47497 [10/Oct/2012:10:49:01.467] http service/newark2 0/0/0/16/40 301 574 - - ---- 4/4/3/0/0 0/0 {} {} "GET /2zi HTTP/1.1" O Here are the options i set for this in my frontend: mode http option httplog capture request header X-Forwarded-For len 25 capture response header X-Forwarded-For len 25 option httpclose option forwardfor EDIT #3: It really seems like haproxy is munging the header and just passing on a single one to the backend. This is fairly impacting to our production service, so if anyone has an ideas it would be greatly appreciated. I'm stumped... :(

    Read the article

  • Fresh Proxmox VE 2.1 installation with defaults can't be reached or pinged

    - by Damainman
    I am using the lastest Proxmox VE 2.1. My server has two NICS with a uplink only connected into eth0. My Server is a co-located server utilizing public IPv4 IPs. It is not behind a firewall or any system which monitors traffic. Via IPKVM I did a fresh install of Proxmox, I put in the correct IP, Mask, Gateway, and DNS information. The install went perfectly fine with no errors. Upon completion and rebooting the system: I am unable to reach the web GUI via the browser, it just times out. I am unable to ping the server. I am unable to ping outside to the Internet from within the server. Tried pinging out to 4.2.2.2 and yahoo.com I tried rebooting the server and restarting the network service. IFCONFIG shows my IP information under vmbro0 which also has the same MAC address as the eth0 device. eth0 only displays a IPv6 Scope:Link address, which I did not setup myself. This is my first time installing proxmox, but after searching for a few hours it doesn't seem like anyone else is having the same issue as me from a fresh install with just the defaults. So far the only thing I did was install it. Also, I know the network cable is good and the IP is good because I was running a Xen XCP server with the same network settings prior to wiping it to install proxmox. Some additional information: for pveversion -v (Installed proxmox-ve_2.1-f9b0f63a-26.iso) pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a) running kernel: 2.6.32-11-pve proxmox-ve-2.6.32: 2.0-66 netstat -nr (note: .136 is my network, and .137 is my gateway) Destination - Gateway - Genmask xxx.xxx.xxx.136 - 0.0.0.0 - 255.255.255.248 0.0.0.0 - xxx.xxx.xxx.137 - 0.0.0.0 /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address xxx.xxx.xxx.138 netmask 255.255.255.248 gateway xxx.xxx.xxx.137 bridge_ports eth0 bridge_stp off bridge_fd 0

    Read the article

  • Help me please with this error

    - by Brandon
    I setup IIS. I moved my folder with all the files to the IIS directory. Now when I go to http://localhost/thefolder I get: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)] Luxand.FSDK.ActivateLibrary(String LicenseKey) +0 FaceRecognition._Default.Page_Load(Object sender, EventArgs e) in D:\Project Details\Layne Projects\DotNet Project\FaceRecognition\FaceRecognition\Default.aspx.cs:60 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42 System.Web.UI.Control.OnLoad(EventArgs e) +132 System.Web.UI.Control.LoadRecursive() +66 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428

    Read the article

  • High apache load but zero traffic

    - by Adie
    I have a problem with new server.. I use VPS Centos with 1GB of ram and I use wordpress CMS. The traffic <100 visitor/hour, but the apache have high load and make the server hang with zero free of ram and can't connect through ssh. I should reboot the vps to make it works here is the load on Apache looks like Tasks: 66 total, 1 running, 65 sleeping, 0 stopped, 0 zombie Cpu(s): 1.6%us, 12.3%sy, 0.0%ni, 48.1%id, 23.0%wa, 4.8%hi, 10.2%si, 0.0% Mem: 1018776k total, 116620k used, 902156k free, 1236k buffers Swap: 1048568k total, 1013052k used, 35516k free, 26628k cached 2949 apache 20 0 459m 42m 3732 D 3.0 4.2 0:09.23 httpd 2959 apache 20 0 460m 29m 3744 D 2.0 3.0 0:02.72 httpd 2968 apache 20 0 460m 26m 3808 D 2.0 2.6 0:02.27 httpd 2972 apache 20 0 460m 24m 3784 D 2.0 2.5 0:02.44 httpd 2986 apache 20 0 460m 29m 3784 R 2.0 2.9 0:02.40 httpd 2969 apache 20 0 458m 29m 3864 D 1.6 3.0 0:02.63 httpd 2974 apache 20 0 460m 25m 3820 D 1.6 2.6 0:02.43 httpd 2990 apache 20 0 460m 23m 3920 D 1.6 2.4 0:02.36 httpd 2994 apache 20 0 460m 31m 3756 D 1.6 3.2 0:02.62 httpd 2956 apache 20 0 460m 26m 3740 D 1.3 2.7 0:02.73 httpd 2957 apache 20 0 465m 22m 3644 D 1.3 2.3 0:02.80 httpd 2967 apache 20 0 458m 24m 3764 D 1.3 2.5 0:02.60 httpd 2970 apache 20 0 463m 25m 3764 D 1.3 2.6 0:03.07 httpd 2971 apache 20 0 451m 22m 3792 D 1.3 2.3 0:02.47 httpd 2973 apache 20 0 458m 25m 3768 D 1.3 2.6 0:02.52 httpd 2987 apache 20 0 465m 20m 3772 D 1.3 2.1 0:03.02 httpd But sometimes the server have uptime more than 5-10hrs but after that the problems start

    Read the article

  • Xmodmap fails to remap modifier keys

    - by ZyX
    When I try to move keys, so that I have CapsLock on escape, Control on CapsLock and Escape on left control, I get the following error: % xmodmap ~/.Xmodmap X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 118 (X_SetModifierMapping) Value in failed request: 0x17 Serial number of failed request: 15 Current serial number in output stream: 15 That is the code that fails: remove Lock = Caps_Lock ! ESC keycode 9 = Caps_Lock add Lock = Caps_Lock remove Control = Control_L ! CapsLock keycode 66 = Control_L add control = Control_L ! Control_R keycode 37 = Escape ! 2*Meta_L keycode 148 = Meta_L add mod1 = Meta_L If I comment out all lines that start with either add or remove it runs without any errors, but does not do what I want. Program versions (Gentoo x86 (stable)): xorg-server-1.7.6 xmodmap-1.0.4 xf86-input-evdev-2.3.2 Xorg.conf: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Evdev Keyboard" "CoreKeyboard" InputDevice "Evdev Mouse" "CorePointer" EndSection Section "Module" Disable "dri" Disable "dri2" Disable "record" EndSection Section "InputDevice" Identifier "Evdev Keyboard" Driver "evdev" Option "Device" "/dev/input/event2" Option "CoreKeyboard" Option "AutoRepeat" "500 25" Option "XkbRules" "xorg" Option "xkb_rules" "xorg" Option "XkbModel" "yahoo" Option "xkb_model" "yahoo" Option "XkbLayout" "dvp2" # ,ru2 Option "xkb_layout" "dvp2" # ,ru2 # Option "XkbVariant" "" # ,winkeys Option "XkbOption" "grp_led:scroll,grp:rctrl_toggle,compose:rwin,grp:lwin_switch" # grp:lwin_switch EndSection Section "InputDevice" Identifier "Evdev Mouse" Driver "evdev" Option "CorePointer" Option "Device" "/dev/input/event3" Option "Name" "Genius Ergo Mouse" Option "HWHEELRelativeAxisButtons" "7 6" Option "WHEELRelativeAxizButtons" "4 5" Option "SendCoreEvents" "true" Option "Buttons" "11" EndSection Section "Files" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/terminus" # FontPath "/usr/share/fonts/intlfonts" FontPath "/usr/share/fonts/ttf-bitstream-vera" # FontPath "/usr/share/fonts/ttf" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/paratype" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Section "ServerFlags" # Option "XkbDisable" "false" # Option "AutoAddDevices" "false" Option "DontVTSwitch" "false" Option "DontZap" "false" # Option "DontZoom" "true" EndSection Everything worked before update.

    Read the article

  • guest crash on long backup via rsync

    - by ToreTrygg
    I recently upgraded host to Ubuntu 9.10 with vmware server 2.0.2, i had two guest machine. One is a sme server i had several crash during a session of backup with rsync to another pc. Normal activities run regularly. The other guest is up without problem since 25 days. I found in the log a lot o f row like these Dec 20 05:29:27.445: vcpu-1| VLANCE: Ethernet0 skipped 2560 time(s) Dec 20 05:29:27.445: vcpu-1| VLANCE: 66 12 5 8 2 3 3 0 1 0 0 1 0 1 2 0 Dec 20 05:29:27.445: vcpu-1| VLANCE: 0 0 1 0 1 0 0 0 1 0 0 0 0 1 0 2452 Dec 20 05:29:27.651: vmx| ide0:0: Command WRITE(10) took 1.947 seconds (ok) Dec 20 05:29:37.945: vmx| ide0:0: Command WRITE(10) took 1.033 seconds (ok) when the vitual machine crash the log report, I paste here only some part to limit the lenght of the message Dec 27 01:48:05.686: Worker#2| Caught signal 6 -- tid 700 Dec 27 01:48:05.686: Worker#2| SIGNAL: eip 0x460422 esp 0xb124c024 ebp 0xb124c03 Dec 27 01:48:05.712: Worker#2| SymBacktrace12 00000000 eip 0x39d7ee in function clone in object /lib/tls/i686/cmov/libc.so.6 loaded at 0x2d1000 Dec 27 01:48:05.719: Worker#2| Unexpected signal: 6. Dec 27 01:48:05.720: Worker#2| Core dump limit is 0 KB. Dec 27 01:48:05.762: Worker#2| Child process 10455 failed to dump core (status 0 x6). Dec 27 01:48:05.762: Worker#2|SymBacktrace13 00000000 eip 0x39d7ee in function clone in object /lib/tls/i686/cmov/libc.so.6 loaded at 0x2d1000 Dec 27 01:48:05.779: Worker#2|Msg_Post: Error Dec 27 01:48:05.780: Worker#2|http://msg.log.error.unrecoverable VMware Server unrecoverable error: (Worker#2) Dec 27 01:48:05.780: Worker#2|Unexpected signal: 6. I have no idea how to solve the problem with this installation, I think to dowgrade the host to a version more compatible with vmware server 2. I read a lot of post about difficult of installation I think the problem of compilation during install could be related to my problem. Excuse me if the post isn't very clear, it's my first post here. Any help or suggest will be appreciated. Thanks

    Read the article

  • Merging cuesheet chapter halves into single track for an audiobook

    - by TheSavo
    I have an audiobook that I have ripped and I need some help constructing chapters. I have already made some cue sheets TITLE "Bookname" PERFORMER "the Author" FILE "File1.FLAC" wave ; 23971906.667 milliseconds TRACK 01 AUDIO TITLE "_Intro" INDEX 01 00:00:00 TRACK 02 AUDIO TITLE "CH 01" INDEX 01 24:15:50 TRACK 03 AUDIO TITLE "CH 02" INDEX 01 66:21:00 TRACK 04 AUDIO TITLE "CH 03" INDEX 01 87:05:00 The audio book is in two files. The chapter at the end of the first file is continued in the second file. However, the second file restates: The publisher Book Title List item Blah blah blah I would like to merge the two 'halves' of the chapter in one seamless track. The only way I can think to do this would be be: Bulk cut down the tracks. Drop the junk info into junk track Continue the track listings as normal Take the two "halves" of the target chapter and build a separate cue sheet for it. I know there has to be an easier way. I am ok with making the 'junk' info a 'gap' or something. These are are FLAC files that will be converted to MP3 for my phone and other potable devices. I have read the primers on cue sheets, but I am just not getting it.

    Read the article

  • Hotmail marking messages as junk

    - by Canadaka
    I was having problems with emails sent from my server being blocked completely by Hotmail, but I found out Hotmail had blocked my IP and by contacting Hotmail I had the block removed. See this question for more info: Email sent from server with rDNS & SPF being blocked by Hotmail But now all emails from my server are going directly to recipients "Junk" folder on hotmail and I can't figure out why. Hotmail says "Microsoft SmartScreen marked this message as junk and we'll delete it after ten days." I tried contacting the same people at Hotmail who had my IP block removed, but I haven't received any reply and its been almost a week. Here are some details: I have a valid SPF record for my domain "v=spf1 a include:_spf.google.com ~all" I have reverse DNS setup I have a Sender Score of 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 I have signed up for Microsoft's SNDS and was approved. My ip says "All of the specified IPs have normal status." Microsoft added my IP to the JMRP Database My IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 my FROM header is being sent in proper format "From: CKA <[email protected]>" Here is a test email source:

    Read the article

  • Performance: Nginx SSL slowness or just SSL slowness in general?

    - by Mauvis Ledford
    I have an Amazon Web Services setup with an Apache instance behind Nginx with Nginx handling SSL and serving everything but the .php pages. In my ApacheBench tests I'm seeing this for my most expensive API call (which cache via Memcached): 100 concurrent calls to API call (http): 115ms (median) 260ms (max) 100 concurrent calls to API call (https): 6.1s (median) 11.9s (max) I've done a bit of research, disabled the most expensive SSL ciphers and enabled SSL caching (I know it doesn't help in this particular test.) Can you tell me why my SSL is taking so long? I've set up a massive EC2 server with 8CPUs and even applying consistent load to it only brings it up to 50% total CPU. I have 8 Nginx workers set and a bunch of Apache. Currently this whole setup is on one EC2 box but I plan to split it up and load balance it. There have been a few questions on this topic but none of those answers (disable expensive ciphers, cache ssl, seem to do anything.) Sample results below: $ ab -k -n 100 -c 100 https://URL This is ApacheBench, Version 2.3 <$Revision: 655654 $> Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/ Licensed to The Apache Software Foundation, http://www.apache.org/ Benchmarking URL.com (be patient).....done Server Software: nginx/1.0.15 Server Hostname: URL.com Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,AES256-SHA,2048,256 Document Path: /PATH Document Length: 73142 bytes Concurrency Level: 100 Time taken for tests: 12.204 seconds Complete requests: 100 Failed requests: 0 Write errors: 0 Keep-Alive requests: 0 Total transferred: 7351097 bytes HTML transferred: 7314200 bytes Requests per second: 8.19 [#/sec] (mean) Time per request: 12203.589 [ms] (mean) Time per request: 122.036 [ms] (mean, across all concurrent requests) Transfer rate: 588.25 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 65 168 64.1 162 268 Processing: 385 6096 3438.6 6199 11928 Waiting: 379 6091 3438.5 6194 11923 Total: 449 6264 3476.4 6323 12196 Percentage of the requests served within a certain time (ms) 50% 6323 66% 8244 75% 9321 80% 9919 90% 11119 95% 11720 98% 12076 99% 12196 100% 12196 (longest request)

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >