Search Results

Search found 56222 results on 2249 pages for 'error checking'.

Page 19/2249 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• HP D530 Startup Error: 512 - Chassis Fan Not Detected

  - by lyrikles

  I'm using the HP D530 Motherboard/CPU that I installed in a new case with a 600W PSU. There was a problem with the onboard chassis fan connector (3-wire) not supplying sufficient power to the chassis fan indicated by the fan spinning very slowly, but I never experienced the "512 Error" at boot. Also, the same fan works perfectly connected directly to the PSU. I disconnected it since I already have plenty of fans connected via the PSU directly. Since then, on startup, I get the error: "512 - Chassis Fan Not Detected" and am asked to "Press F1 to continue". This gets quite annoying since I use this machine remotely (w/ FreeNAS). What could be causing the onboard fan connector to not be giving enough power? If this is unable to be corrected, how can I make the BIOS think there's a chassis fan plugged in without actually plugging a fan into the onboard connector? Would it be possible to jumper the pins without damaging the motherboard or PSU? Thanks,Erik

  Read the article

• Randomly getting a 500 error on my website

  - by randylahey

  I am randomly getting a 500 error on my websites, all of which are hosted on a shared server. It won't happen all the time, just randomly when I will refresh the page I will get a 500 error. It usually will come back after I refresh a few times. I've been reading about it and have heard that .htaccess files can cause this... I did recently start using an .htaccess file to tell my server to start using php 5. I got the code straight from the hosting company that I am with. This is what is in the .htaccess file: AddType x-mapp-php5 .php If anyone has any ideas as to what would be causing this, that would really help. Thanks!

  Read the article

• Error logging with PHP and mod_fcgid

  - by nbv4

  I have a mediawiki install that is acting up. Whenever I try to save an article, it goes to a blank screen. All though if I refresh that blank screen, it will go on to work. I have no idea why it's doing that, but it seems to be that it's a problem with PHP. I guess by default errors don't get logged when using mod_fcgid, because I can't find an error log anywhere. I tried enabling logging in the /etc/php5/cgi/php.ini, but that didn't do anything. How do I achieve php error logging? I'm using ubuntu 9.10.

  Read the article

• OSX: Python packages fail to install, error message "/usr/local/bin: File Exists"

  - by kylehotchkiss

  I keep trying to install django and other python packages, and I keep getting the exact same error message: Installing django-admin.py script to /usr/local/bin error: /usr/local/bin: File exists So I look to make sure that my /usr/local folder is okay. At first glance it appears okay, until I try cd-ing into my bin. It says it can't because it's not a directory. Peculiar, I thought, so then I tried a Anchorage:local khotchkiss$ ls -a -l total 26168 drwxr-xr-x 6 root wheel 204 Dec 26 20:18 . drwxr-xr-x@ 14 root wheel 476 Feb 24 12:54 .. -rwxr-xr-x@ 1 root wheel 13395080 Oct 22 23:04 bin drwxr-xr-x 8 root wheel 272 Dec 26 20:18 git drwxr-xr-x 4 root wheel 136 Dec 18 11:31 include drwxr-xr-x 12 root wheel 408 Dec 18 11:31 lib And haven't a clue of what the 'bin' is, why its so large, and why its preventing me from installing python packages. Any clue?

  Read the article

• "File does not exist" in apache error log.

  - by Samuurai

  Hi, This is an example of an error in out log file: File does not exist: /var/www/website/female, referer: http://www.website.com/female/dresses/A-Dress-Black "/female" doesn't exist, because we use friendly urls via our .htaccess file which looks like this: RewriteEngine On # Turn on the rewriting engine RewriteBase / RewriteCond %{http_host} !^www.website.com$ [nc] RewriteRule ^(.*)$ http://www.website.com/$1 [r=301,nc,L] RewriteRule ^News/?$ news.php [NC,L] RewriteRule ^About/?$ about.php [NC,L] RewriteRule ^Contact/?$ contact.php [NC,L] RewriteRule ^Sign-In/Create-Account?$ sign_up_in.php [NC,L] RewriteRule ^Logout?$ sign_up_in.php?l=1 [NC,L] RewriteRule ^Your-Bag?$ your_bag.php [NC,L] RewriteRule ^Help?$ help.php [NC,L] RewriteRule ^Profile?$ profile.php [NC,L] RewriteRule ^Create-Profile?$ profile_create.php [NC,L] # ITEM RewriteRule ^([A-Za-z-]+)/([A-Za-z-]+)/([A-Za-z0-9-]+)/?$ store_focus.php?sex=$1catName=$2&permalink=$3 [NC,L] # PAGE RewriteRule ^([A-Za-z-]+)/([A-Za-z-]+)/page/([0-9]+)/?$ store.php?sex=$1&catName=$2&page=$3 [NC,L] # CATEGORY RewriteRule ^([A-Za-z-]+)/([A-Za-z-]+)/?$ store.php?sex=$1&catName=$2 [NC,L] # SEX RewriteRule ^([A-Za-z-]+)/?$ store.php?sex=$1 [NC,L] Every request for a page results in an error. Has anyone encountered this before? Thanks! Beren

  Read the article

• webmin bind issue- error when i try to start bind

  - by Arvind

  I am setting up a domain = mydomain.com with 2 nameservers ns1.mydomain.com and ns2.mydomain.com in Webmin - BIND. For this, I have registered 2 child nameservers at my domain registrar, and in Webmin-Bind I have set up a new zone for this domain. In this zone, i have specified 2 nameserver records- one each for ns1 and ns2. Also, I have defined 2 address records- one each for ns1.mydomain.com -> IP Address #1 and for ns2.mydomain.com -> IP Address #2 However when I try to start BIND in Webmin, I get the following error-- Failed to start BIND : Starting named: Error in named configuration: zone mydomain.com/IN: has no NS records zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: bad zone [FAILED]

  Read the article

• Error with TextMate 2 --shell-escape and gnuplot 10.8.2

  - by Manuel

  I have had TM 1.X since a long time ago, but a week ago I updated my system to Mountain Lion 10.8.2 and installed TM2. The problem is that I write with LaTeX, and sometimes I use gnuplot for the graphs (I installed gnuplot with macports). But now it doesn't work because the --shell-escape doesn't work, this is the error message I get: Package pgfplots Error: Sorry, the gnuplot-result file '"untitled 2.pgf-plot.table"' could not be found. Maybe you need to enable the shell-escape feature? For pdflatex, this is ' pdflatex -shell-escape'. You can also invoke ' gnuplot .gnuplot' manually on the respective gnuplot file.. And then, looking around I discovered that it's not just gnuplot but everything which needs --shell-escape. Question What happened? How can I get TM have the correct rights so this works? It worked right in Snow Leopard with TM 1.5.

  Read the article

• Windows Handling Piped Comands Error Redirection

  - by jpmartins

  Warning: I am no expert on building scripts, and sorry for lousy English. In an case of generating a CSV from a database query I'm using the following commands. ... CALL java.exe -classpath ... com.xigole.util.sql.Jisql -user dmfodbc -pf pwd.file -driver com.sybase.jdbc3.jdbc.SybDriver -cstring %constr% -c ; -input 42.sql -formatter csv -delimiter ; 2%LOGFILE% | CALL grep -v -e "SELECT right" -e "executing: " -e " rows affect" %FicheiroR% 2%LOGFILE% ... I'm using windows implementation of grep. The 2%LOGFILE% in both java and grep command is causing an error message indicating the file is being use by another process. The Ugly workaround i have came up with is to put grep error redirect to a temporary %LOGFILE%.aux java ... | grep ... 2%LOGFILE%.aux type %LOGFILE%.aux % %LOGFILE% del %LOGFILE%.aux What is a better solution?

  Read the article

• S3200SH error 5220 every boot (CMOS/NVRAM Cleared by jumper)

  - by TechAUmNu

  I have a S3200SH Intel server board with a Intel Xeon 3220 Quad Core. Every time I boot it, I get error 5220 (CMOS/NVRAM Cleared by jumper). The jumper is not installed and I have replaced the lithium battery. The board overheated once, although still seems to work fine apart from this error. Also if I leave the board sitting in the bios for a while it sometimes randomly turns off, with all 4 diagnostic LED's red. I have moved the 2GB DIMM to another slot, which seems to have fixed this problem. Any ideas would be greatly appreciated.

  Read the article

• Error in Windows 7 after watching a MOV file

  - by JosephStyons

  Ever since watching a .MOV file with Windows Media Player on my pc, I am sporadically getting the below error. Does anyone know the cause of this, or a good way to fix it? This link has a hotfix, but it only applies to Windows XP. --------------------------- Microsoft Visual C++ Runtime Library --------------------------- Runtime Error! Program: C:\Windows\system32\DllHost.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. --------------------------- OK --------------------------- I am running Windows 7 with all updates installed.

  Read the article

• "Access Denied" error when starting Windows Security Center service

  - by Isxek

  I am working on a laptop with Windows 7 Ultimate (32-bit) which had previous issues with Microsoft Security Essentials. I've removed the previous installation of Security Essentials and reinstalled it. There's no problem with the said antivirus now, but after a couple of days it was brought back to me because of the error about Windows Security Center service not being started. I've tried setting it to start Automatically instead of "Delayed Start", but I still keep getting "Error 5: Access is Denied." I've searched other possible solutions but it's mostly been either what I did already or "Don't worry about it." Any ideas? Thanks in advance! EDIT: I've scanned the system with both Malwarebytes AM and SUPERAntiSpyware and have found no traces of anything. EDIT2: I have also tried running sfc /scannow to see if the files might be damaged. Got the message no integrity violations were found, however.

  Read the article

• bash script - spawn, send, interact - commands not found error

  - by Sandeepan Nath

  I my shell script, I am trying to remove password prompt for scp command (as given in http://stackoverflow.com/questions/459182/using-expect-to-pass-a-password-to-ssh/459225#459225) and this is what I have so far :- #!/usr/bin/expect spawn scp $DESTINATION_PATH/exam.tar $SSH_CREDENTIALS':/'$PROJECT_INSTALLATION_PATH expect "password:" send $sshPassword"\n"; interact On running the script, I am getting errors spawn: command not found send: command not found interact: command not found I was also getting error expect: command not found also, then I realised the path to expect was not correct and expect was not installed at all. So, I did yum install expect, corrected the path and the error was gone. But not able to remove the other 3 errors still.

  Read the article

• Running a defect php file cause error 500

  - by John Brunner

  When I address a PHP file, I always get an error 500. I've looked up the logs of my Apache server, and this displays that some includes etc. in the PHP file address files which don't exist on the server. They don't exist because I'm just testing my PHP file. But could it be achieved that the server runs the php file in every case, even when something is wrong? Every 30 seconds an entry is made in the error_log file which says [Sat Jun 09 17:55:07 2012] [error] [client 10.224.55.160] File does not exist: /var/www/html/index.html ... but there IS an index.html?!

  Read the article

• Darik's Boot And Nuke - ERROR /dev/sda

  - by user1403844

  I'm trying to wipe the drive of an old company computer with DBAN so I can install Redhat Enterprise and learn Linux (it's a Dell Inspiron 1210, if that matters). I burnt DBAN to a CD and boot from that CD (running on an external USB CD drive). Whenever I try to run the utility--whether it's Autonuke, or any of manual wiping methods-- it spits on the errors: ERROR /dev/sdb ERROR /dev/sda From what I've read on some other forums, there are some issues with other drives or removable media interfering however I've disabled all other drives in bios, leaving just CD/DVD and the Hard Disk but still no luck. Any advice on how I can reconcile these errors and wipe the disk?

  Read the article

• Remote desktop session ends abruptly with a "protocol error"

  - by Jon

  Intermittently we get a problem where a remote desktop session will get disconnected with the error message “Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.” We are getting this with one server only which is running Windows Server 2008, connecting with Windows 7 clients. The session itself stays running, you just get disconnected, and you can try and reconnect. Sometimes you get in for a while then it will kick you out. We are connecting from Windows 7 clients. We have tried connecting using Cord on a Mac and this works fine, so it's not like the session itself is corrupted. One problem is that there are some critical applications running under the session (I know, let's not discuss the idiocy of that), so we cannot reset the session in any way during the working day – so any diagnostics must have minimum impact. Thanks, Jon

  Read the article

• Disabling hardware checking in the start up

  - by sven

  I have a ubuntu (10.04) on my desktop and it doesn't have monitor. I would like to connect the desktop (ubuntu) via teamviewer from my laptop. However, when the PC is powered, pc gives an error about it could not find monitor and it gets stuck in this error and does not continue. Since the ubuntu started correclty, teamviewer doesnt start to work on ubuntu so that I can not connect to the ubuntu. How can I disable hardware/desktop checking at the startup, so that ubuntu would start normally then I can use teamviewer?

  Read the article

• HD read error while booting linux

  - by sidharth sharma

  I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

  Read the article

• In Windows Vista, when starting any and every program, a "bad image" error is generated

  - by Mark Hatton

  I have a problem where any program is started under Windows Vista, the following error message is generated Bad Image C;\PROGRA~1\Google\GOOGLE~3\GOEC62~1.DLL is either not designed to run on Windows or it contains an error.Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. This happens for every program started, including those that start automatically at boot time. My Google-fu is failing to solve this for me. I have already tried an "sfc /scannow" which did find some problems, but it said that it could not correct them. What might cause this problem? How might it be resolved?

  Read the article

• grub2 error: out of disk

  - by Carl Smotricz

  I'm trying to make a 250G USB hard disk Ubuntu-bootable on a Compaq nc6220 laptop. I've removed all other disks, so /dev/sda (the USB disk) is the only disk other than CDROM. I installed Ubuntu 9.10 to this disk from the live CD, putting the bootloader on /dev/sda . The default system couldn't be booted, and nothing I did in the Grub menu/cmdline helped. So I chrooted onto the disk and did grub-install /dev/sda. That seemed to work fine, but Grub (1.97 beta 4) keeps coming up with error: out of disk Even when I drop to the command line to do something simple like ls or help, it's always the same error message. Any hints for resolving this, please?

  Read the article

• Error Formatting Memory Card

  - by Kirby Fromm

  I just tried to look at some of my pictures on my sony cyber-shot dsc-tx5, with a Lexar platinum II 16 GB memory stick, and it is now saying I have a formatting error every time I turn the camera on. The card and Camera are both 3 months old and have worked perfectly before. I tried to check the card on my computer and it says there is an error, so the camera is working but the card is not. Does anyone know how I can fix this to get the pictures off of the card?

  Read the article

• Error 800 while connecting to VPN

  - by Aamir

  I am trying to connect to my office network through VPN. It used to work fine earlier but now as soon as I hit connect, I get Error 800: Error 800: Unable to establish VPN Connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. I am using Windows XP and I am able to ping the VPN server successfully. I have Symantec Endpoint Protection installed (if it matters). I have tried disabling it as well but nothing changes.

  Read the article

• Which particular file caused "Delayed write failed" error?

  - by user35020

  I sometimes get this error when resuming from hibernation: Delayed Write Failed: Windows was unable to save all the data for the file G:\$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. I know this is caused because the hard drive (G:, an external USB drive) was (a) plugged in when I hibernated and wasn't ready at wake-up, or (b) I simply forgot to plug it when resuming from hibernation. My question is: is there any way to see which particular file/folder/etc failed to be written? The hard drive functions correctly before and after, so there seems to be no permanent damage. Is there a detailed log someplace or a utility? I've searched but found nothing. Thanks for any help!

  Read the article

• Where is this error message coming from?

  - by jordanpg

  Recently switched to a new ISP after a move, running Chrome under OSX 10.7. I see the following error when visiting various sites -- no particular pattern -- from time to time. This is the entire message. It is the only thing that appears in my web browser. The problem fixes itself in a few minutes. Probably a lookup error of some sort, but I don't recognize it. What piece of software is serving this message? What is happening? What is this Reference # referencing? Invalid URL The requested URL "/articles/6517181", is invalid. Reference #9.6f200f6c.235618518a.b7e910cf

  Read the article

• Mac Port error installing gsoap

  - by Kevin

  Hi All, I have installed Mac Ports V1.8.1 no worries. I ran sudo port -v selfupdate no worries. I ran sudo port install gsoap And get the following error message. --- Computing dependencies for gsoap --- Fetching gsoap --- Attempting to fetch gsoap_2.7.13.tar.gz from http://optusnet.dl.sourceforge.net/gsoap2 --- Verifying checksum(s) for gsoap --- Extracting gsoap --- Applying patches to gsoap --- Configuring gsoap Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_gsoap/work/gsoap-2.7" && ./configure --prefix=/opt/local --enable-samples " returned error 77 Command output: checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... no checking build system type... i386-apple-darwin10.2.0 checking host system type... i386-apple-darwin10.2.0 checking whether make sets $(MAKE)... (cached) no checking for C++ compiler default output file name... configure: error: C++ compiler cannot create executables See `config.log' for more details. Error: Status 1 encountered during processing. Any ideas as to why it is failing. Regards Kevin

  Read the article

• Is error suppression acceptable in role of logic mechanism?

  - by Rarst

  This came up in code review at work in context of PHP and @ operator. However I want to try keep this in more generic form, since few question about it I found on SO got bogged down in technical specifics. Accessing array field, which is not set, results in error message and is commonly handled by following logic (pseudo code): if field value is set output field value Code in question was doing it like: start ignoring errors output field value stop ignoring errors The reasoning for latter was that it's more compact and readable code in this specific case. I feel that those benefits do not justify misuse (IMO) of language mechanics. Is such code is being "clever" in a bad way? Is discarding possible error (for any reason) acceptable practice over explicitly handling it (even if that leads to more extensive and/or intensive code)? Is it acceptable for programming operators to cross boundaries of intended use (like in this case using error handling for controlling output)? Edit I wanted to keep it more generic, but specific code being discussed was like this: if ( isset($array['field']) ) { echo '<li>' . $array['field'] . '</li>'; } vs the following example: echo '<li>' . @$array['field'] . '</li>';

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >