Search Results

Search found 1073 results on 43 pages for 'firmware'.

Page 19/43 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Obtaining Embedded Linux Experience

    - by Thomas Matthews
    As an embedded firmware developer, I have used operating systems such as WinCE, Nucleus, ThreadX, VRTX and some background loops. There are more opportunities for me if I had Linux OS experience, or perhaps some certification. In my research, the only way to get Linux experience is to have your company move to a Linux OS. All the recruiters and HR folks won't let you in the door unless you have Linux experience. I haven't found any Universities that teach Linux. Recruiters and HR want some tangible proof (starting up your own Ubuntu box or playing with it doesn't count). So, how does one get into the area of Embedded Linux without Linux experience (I have Unix and Cygwin experience, but not Linux)?

    Read the article

  • Ubuntu 10.10 Netbook Remix on Asus Eee PC 701 4G - boot process hangs up

    - by Andrew
    I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Insall Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

    Read the article

  • using isight camera in macbookpro(8,2) on ubuntu 12.04 virtualbox VM

    - by Kurt Spindler
    I'm having a lot of trouble using the built-in isight camera on my macbookpro8,2 (early 2011) from an ubuntu 12.04 virtual machine, run inside VirtualBox. The following is the log I get when I try to run guvcview ubuntu@ubuntu:~$ guvcview guvcview 1.5.3 ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71 ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. FaceTime HD Camera (Built-in) (location: usb-0000:00:0b.0-1) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/10, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, vid:05ac pid:8509 driver:uvcvideo checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls no codec detected for H264 no codec detected for MP3 - (lavc) Checking video mode 960x540@32bpp : OK Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable write /home/ubuntu/.guvcviewrc OK free controls cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK ubuntu@ubuntu:~$ Any help would be greatly appreciated. Only clue I have is that I initially was having problems, tried using the old method of fixing isights (involving installing isight-firmware-tools) before realizing that I just hadn't turned on the VM setting to allow the VM to access the webcam. :) Anyway, I wonder if installing that messed something up. However, I think this is a red herring because I've: shut down and turned back on the Mac, restarted the VM, tried a different VM (for which I never installed isight-firmware-tools, and created an entirely new ubuntu vm. All instances have had this problem. Similarly, other viewers, such as cheese, avplay, avconv have had all various kinds of errors.

    Read the article

  • iPad Jailbreak &ndash; On The Lam In A Single Day

    - by David Totzke
    Exploits to jailbreak the iPhone are well known.  The iPad runs on the iPhone 3.2 firmware.  What this means is that the iPad was shipped with known security vulnerabilities that would allow someone to gain root access to the device. Nice. It’s not like these are security vulnerabilities that are known but have no exploits.  The exploits are numerous and freely available. Of course, if you fit the demographic, you probably have nothing to worry about. Magical and Revolutionary?  Hardly. Dave Just because I can…

    Read the article

  • Sony steps back from Linux?

    - by EmbeddedInsider
    In Cnet today I saw something interesting: According to Sony, it plans to release PlayStation 3 firmware version 3.21 on Thursday to achieve one goal: eliminate the "Other OS" option currently available in all pre-Slim models of the video game console. The feature allowed PS3 owners to install an operating system--in almost every case, Linux--onto the PlayStation 3. No surprise. l  Sony is a company heavily invested with legacy IP (games, all that music and Blueray).  They know that content can be nowhere near the GPL. http://news.cnet.com/8301-13506_3-10471356-17.html?tag=rtcol;pop

    Read the article

  • problems updating system with apt-get

    - by Javier
    After to do apt-get update and try with apt-get upgrade I have the next error message: This is a coppy of my terminal (in spanish) root@LinuxJGP:/home/javiergp# apt-get upgrade Leyendo lista de paquetes... Hecho Creando árbol de dependencias Leyendo la información de estado... Hecho Se actualizarán los siguientes paquetes: apport apport-symptoms fonts-liberation gnome-icon-theme gnome-orca language-pack-en language-pack-en-base language-pack-es language-pack-es-base language-pack-gnome-en language-pack-gnome-en-base language-pack-gnome-es language-pack-gnome-es-base light-themes linux-firmware oneconf resolvconf sessioninstaller software-center ssl-cert tzdata ubuntu-docs ubuntu-keyring ubuntu-sso-client ubuntuone-control-panel ubuntuone-installer unity-lens-video unity-scope-video-remote xdiagnose 29 actualizados, 0 se instalarán, 0 para eliminar y 0 no actualizados. E: Los archivos de índice de paquetes están dañados. No existe un campo «Filename:» para el paquete ubuntu-keyring. How can resolve this problem?

    Read the article

  • La Playstation 3 de Sony ne supportera plus Linux ou les autres systèmes d'exploitation

    La Playstation 3 de Sony ne supportera plus Linux ou les autres systèmes d'exploitation Après le bug de l'an 2010, Sony fait encore parler de lui avec une nouveauté sur la PS3. Sony vient d'annoncer que le firmware version 3.21 enlévera la possibilité d'installer d'autres systèmes d'exploitation. La raison de la firme japonaise est d'enlever un risque de sécurité à leur console fétiche. Par contre, pour beaucoup, la PS3 est une solution peu chère pour avoir un lecteur Blu-ray mais aussi d'avoir le processeur Cell (d'IBM) à disposition. Du coup, la solution logique était d'installer Lin...

    Read the article

  • Ubuntu on Mac mini and refit

    - by Thomas
    I have successfully installed Ubuntu pangolin 64 bit on a mac mini 2011 5,3 ( server version ). I have used the Ubuntu iso which I then converted to .dmg and dd'ed into an usb stick. I didn't want to keep OS X installed so I deleted the current partition and reformatted the drive as ext4 for / + a small swap partition. Everything seems to work nicely, but I have now a question since I read lots of reviews/howto when you people installed rEfit on Mac OS X. Did you use rEfit to be able to have a dual boot or there are other advantages by doing that ( apart that you will be able to download updated firmware for your hardware in the future via Mac OS ) like BIOS emulation and the like ?

    Read the article

  • Broadcom STA driver doesn't work well with BCM4313

    - by Oli
    Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

    Read the article

  • Referring to hardware/software in first-person? [closed]

    - by JYelton
    At my company, there is a habit for the engineers to refer to their respective hardware/firmware/software in the first-person as if the device they are responsible for is a manifestation of themselves. I'll give you an example: Hardware Engineer: "I don't receive the first byte, so I stay off." Software Engineer: "I'm sending you the first byte after the ack flag, so I thought you were getting it." Hardware Engineer: "No, you're not turning me on." It was this very example I overheard today that nearly had me giggling in fits. "You're not turning me on." Well, I should hope not! So, is it common practice for engineers to do this, or simply unprofessional? Any suggestions for changing this apparently bad habit?

    Read the article

  • Lucid hangs at booting after kernel upgrade

    - by Thomas Deutsch
    This weekend, one of our servers running Lucid has installed some upgrades: libgcrypt11 1.4.4-5ubuntu2.1 linux-firmware 1.34.14 linux-image-2.6.32-41-generic 2.6.32-41.91 linux-libc-dev 2.6.32-41.91 Afterwards, it rebooted since this was a kernel upgrade. Now, it hangs at booting, after /scripts/init-bottom. init-bottom itself should not be the problem, the last line I can see is "done". So the problem has to be shortly after that. http://manpages.ubuntu.com/manpages/hardy/man8/initramfs-tools.8.html tells me, that the next step is procfs and sysfs are moved to the real rootfs and execution is turned over to the init binary which should now be found in the mounted rootfs. But I don't know how and where. The problem exists with older kernels too, and this one here doesn't fix the problem: http://www.tummy.com/journals/entries/jafo_20111003_160440 Anyone an idea?

    Read the article

  • Ubuntu install doesn't recognize kingston SSDnow sv 200 90g

    - by Quique Garcia
    I'm trying install Ubuntu 12.04 on my new Kingston SSD Now SVP200S3/90G, but the installer doesn't list this disk to be installed. However gparted let me do any partitioning operation correctly. I've tryed with Ubuntu Studio and Ubuntu Desktop on different machines: Lenovo ThinkPad T400, Lenovo ThinkStation C20, MoBo ASUS Crosshair V formula. SATA controller in all machines has been set to AHCI and IDE operation and different SATA ports with no luck. The firmware on the SSD has been updated to V.503xxx (latest on kingston page) Any help is appreciated, regards!

    Read the article

  • HP Pavilion tx2000 - Wifi adapter no longer works after moving from 12.04 to a 12.10 clean install

    - by Marek L.
    I have a HP Pavilion tx2000 that I have been running Ubuntu 12.04 on for a couple of months without any problems (wifi worked great) until yesterday when my hard drive failed. I replaced the hard drive and decided to install Ubuntu 12.10. Unlike 12.04, the wifi did not work after the installation finished and all the updates where installed (over Ethernet). The network drop down in the top right didn't even show a wireless option. I Googled about for a bit and found some solutions that seemed like they might work. Unfortunately they did not. Here is what I tried: sudo apt-get remove bcmwl-kernel-source sudo apt-get install b43-fwcutter sudo apt-get install firmware-b43-lpphy-installer Restart the computer. And the wifi still didn't work. At which point I panicked a bit and tried to undo the previous commands by running: sudo apt-get remove b43-fwcutter firmware-b43-lpphy-installer sudo apt-get install bcmwl-kernel-source Restart the computer. The wifi still doesn't work. This is where I stopped because I have no idea what I am doing and don't want to mess something up. The network drop down still doesn't show a wireless option and the hardware wifi switch on the laptop is amber (it turns blue when the wifi is on). Using the hardware switch does not change the color. Output from: sudo lspci ... 08:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01) ... Output from: sudo lshw -class network *-network UNCLAIMED description: Network controller product: BCM4322 802.11a/b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1100000-d1103fff ... Output from: sudo rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes UPDATE: After writing up this question tried the following command: sudo rfkill unblock all At first it didn't do anything but after running it about four times, sudo rfkill list all now returns: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no But the network menu still does not have a wireless option and the hardware switch still glows amber. Pushing the hardware switch turns the hard block back on and I have to run sudo rfkill unblock all multiple times again to turn it off. Any help is appreciated! Update 2: Full output from sudo lspci -nn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a) 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304] 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] 08:00.0 Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01) 09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)

    Read the article

  • How can I host a website on a dynamically-assigned IP address?

    - by nick
    I recently upgraded my internet to the point that it is much faster and more reliable than my current webhost. I would like to move my current domain to be hosted at home, but my IP address is dynamic. As far as I know, I only get a new IP when I restart my modem and or router (which is almost never) or when cable one (my ISP) pushes out a firmware update (rarely). There are a few ways I can see doing this: Convince my ISP to give me a static IP Assign my router my current IP to force a static IP (which might work?) Set my DNS record to my current IP address and update it on the rare occasions that it changes. Obviously I'm hoping that the first one works, but I don't want to pay a lot of extra money (if that's what it takes) to get a static IP address. Which of these options will work most reliably?

    Read the article

  • How to boot load the kernel using EFI stub (efistub) loader?

    - by Pro Backup
    I have Ubuntu 14.04 running in UEFI mode as only operating system, no dual-boot here. The kernel version is 3.13.0-24-generic. There is an EFI partition. In this case the EFI partition is not at the default /dev/sda1 but at /dev/sda3 because I did actually convert BIOS mode to EFI mode. I have used the grub-efi-amd64 package, though that actually loads GRUB boot menu from UEFI firmware boot menu (UEFI boot loads \EFI\ubuntu\grubx64.efi). I want to skip that double boot menu loading step, and boot faster, directly from UEFI into the kernel. The Ubuntu kernels since 12.10 have "Kernel EFI stub loader" feature. I know I do need to copy the Ubuntu kernel to the EFI partition (possibly rename) and create an entry in UEFI boot menu (for instance using efibootmgr). Which exact terminal commands are necessary to do this?

    Read the article

  • Ubuntu server 13 hangs on boot

    - by Slava Fomin II
    I formatted my WD30EFRX 3TB SATA HDD as GPT with the following layout: 200 MB FAT32 (BOOTABLE) 50GB EXT4 (Mount point: /) 4 GB SWAP SPACE ~2.9 TB EXT4 (with no mount point) Then i created a Flash USB using Rufus 1.3.3 and the following ISO-image: ubuntu-13.04-server-amd64.iso. I used following configuration to create the USB: GPT partition scheme for UEFI computer FAT32 (16KB) I successfully booted from this USB on my Intel D510MO motherboard in UEFI mode (there were a black and white boot loader menu instead of a colorful GUI) and installed the OS. During the boot loader installation i saw it was grub-efi-amd64 as it must be. After installation i removed the flash drive and tried to boot the system, but just after a BIOS POST it hangs (there is a white blinking cursor at the left top corner of the black screen) and nothing happens. UEFI Mode is enabled in the BIOS configuration and i've updated the BIOS to the latest firmware. What went wrong, how i can confirm that system was installed properly? How can i boot the OS?

    Read the article

  • My wireless is hard-blocked

    - by Cristian
    I'm new to linux and i am having trouble getting my wireless to work I've found the following things Wireless LAN Soft blocked: no Hard blocked: yes and : *-network DISABLED description: Wireless interface product: RT3090 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 6c:62:6d:19:38:b9 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.2.0-25-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:fdfe0000-fdfefff Can you please tell me what to do?

    Read the article

  • Repeated disconnects on WPA PEAP network

    - by exasperated
    My school has a WPA PEAP network with GTC inner authentication. I am able to connect to the network, but once I load a website or two, the network become unresponsive (i.e. in Chromium, it gets stuck at "Sending request"), and I'm eventually disconnected. Any help will be greatly appreciated. Here's some log output. I can provide more if needed: Ubuntu 13.04 3.8.0-32-generic x86_64 lsusb: 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lsmod: iwldvm                241872  0  mac80211              606457  1 iwldvm iwlwifi               173516  1 iwldvm cfg80211              511019  3 iwlwifi,mac80211,iwldvm dmesg: [    3.501227] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [    3.503541] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 [    3.527153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [    3.527162] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [    3.527170] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [    3.527178] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [    3.527186] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [    3.527192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [    3.527240] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [    3.551049] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [  375.153065] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.159727] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [  375.553201] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.559871] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1892.110738] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1892.117357] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5227.235372] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5227.242122] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5817.817954] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5817.824560] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5824.571917] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 5824.571929] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5824.571935] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6956.290061] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6956.296671] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6963.080560] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6963.080566] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6963.080570] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7613.469241] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7613.475870] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 7620.201265] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7620.201278] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7620.201285] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8232.762453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8232.769065] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 8239.581772] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8239.581784] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8239.581792] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [13763.634808] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [13763.641427] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [16955.598953] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [16955.605574] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 lshw:    *-network        description: Wireless interface        product: Centrino Advanced-N 6235        vendor: Intel Corporation        physical id: 0        bus info: pci@0000:03:00.0        logical name: wlan0        version: 24        serial: b4:b6:76:a0:4b:3c        width: 64 bits        clock: 33MHz        capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless        configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-32-generic firmware=18.168.6.1 ip=10.250.169.96 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn        resources: irq:46 memory:f7c00000-f7c01fff iwlist scan: Cell 02 - Address: 24:DE:C6:B0:C7:D9                     Channel:36                     Frequency:5.18 GHz (Channel 36)                     Quality=29/70  Signal level=-81 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=0000004ff3fe419b                     Extra: Last beacon: 27820ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030124                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1624001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3424001B000000FF000000000000000000000000000000           Cell 04 - Address: 24:DE:C6:B0:C3:E9                     Channel:149                     Frequency:5.745 GHz                     Quality=28/70  Signal level=-82 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=000000181f60e19c                     Extra: Last beacon: 28680ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030195                     IE: Unknown: 050400010000                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1695001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3495001B000000FF000000000000000000000000000000                     IE: Unknown: DD07000B8601040817                     IE: Unknown: DD0E000B860103006170313930333032           Cell 09 - Address: 24:DE:C6:B0:C0:29                     Channel:149                     Frequency:5.745 GHz                     Quality=39/70  Signal level=-71 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=00000112fb688ede                     Extra: Last beacon: 27716ms ago ifconfig (while connected): wlan0     Link encap:Ethernet  HWaddr b4:b6:76:a0:4b:3c             inet addr:10.250.16.220  Bcast:10.250.31.255  Mask:255.255.240.0           inet6 addr: fe80::b6b6:76ff:fea0:4b3c/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:230023 errors:0 dropped:0 overruns:0 frame:0           TX packets:130970 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:255999759 (255.9 MB)  TX bytes:16652605 (16.6 MB) iwconfig (while connected): wlan0     IEEE 802.11abgn  ESSID:"CatChat2x"             Mode:Managed  Frequency:5.745 GHz  Access Point: 24:DE:C6:B0:C0:29              Bit Rate=6 Mb/s   Tx-Power=15 dBm              Retry  long limit:7   RTS thr:off   Fragment thr:off           Power Management:off           Link Quality=36/70  Signal level=-74 dBm             Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0           Tx excessive retries:0  Invalid misc:3   Missed beacon:0

    Read the article

  • What's the story with TRIM support?

    - by Kent Boogaart
    The situation with TRIM in Ubuntu has me utterly confused. I don't know whether I need to manually run it or not. Sources I've found are disparate and unclear. I have Ubuntu 10.04 with latest updates (including kernel 2.6.32-26). I have an Intel X-25M drive with latest firmware, and it is formatted as ext4. So, does TRIM support run automatically? If not, how do I check if I need to run it, and then how do I run it if necessary?

    Read the article

  • Asus Eee PC 701 4G hangs on boot

    - by Andrew
    I've got an old Eee PC 701 4G with the following specifications: 512 MB RAM 4GB SSD drive SM223AC 8GB SD card extension Screen resolution: 800 x 480 BIOS Revision 1101 (05/16/2008) EC Firmware version: EPC-079 Windows XP SP3 works fine on it, but I decided to switch my OS to Ubuntu. I have downloaded an Ubuntu 10.10 Netbook Remix ISO and wrote it to my FAT32 SD card using Universal-USB-Installer-1.8.3.3, as described on ubuntu.com During standard load from the SD card the boot process hangs up with black screen. If I'll press F6 while preloading Ubuntu, it sucessfully displays the boot menu, selecting language and showing 2 main commands: "Run ubuntu from USB drive" and "Install Ubuntu". Selecting either of these commands leading to the same result - after some background work the main loading indicator is displayed ("Ubuntu" text with dotted progress bar under it), and it's progressing forever without any effect. Is Ubuntu 10.10 compatible with my Eee PC at all? How to boot it correctly?

    Read the article

  • Du heartbeat pour les assets

    - by P. Cendrowski
    Avant la version 4.6 du manager ASR, la notion de heartbeat s'entent uniquement entre le manager ASR et l'infrastructure Oracle. Il n'y avait pas de heartbeat au niveau de l'asset. Pour rappel, le heartbeat sert à assurer que la communication entre le manager ASR et l'infrastructure Oracle est toujours opérationnelle. Le manager ASR envoie quotidiennement un heartbeat. Si deux heartbeat consécutifs manquent à l'appel, les assets attachés passent en statut "No heartbeat" dans My Oracle Support (MOS), et un e-mail est envoyé au compte qui a servi à enregistré le manager ASR et aux contacts associés aux assets. La version 4.6 apporte une amélioration significative, dans la mesure ou elle introduit un heartbeat au niveau de l'asset, pour les telemetry sources suivantes : ILOM avec version de firmware 3.2.1.4 ou plus serveurs Fujitsu M-10 Solaris 11 via un Manager ASR relay Cette amélioration renforce la fiabilité de l'outil et mérite vraiment de passer un petit peu de temps pour upgrader le manager ASR en 4.6 (pour upgrader un manager ASR, voir ce billet). Pour connaitre la version actuelle de votre manager ASR : # /opt/SUNWswasr/bin/asr show_version

    Read the article

  • Unexpected advantage of Engineered Systems

    - by user12244672
    It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

    Read the article

  • Set nomodeset in usb installation (efi loader with iso)

    - by Garrett
    I'm working with the studyblast solution (http://studyblast.wordpress.com/2011/08/14/guide-mac-os-x-lion-how-to-boot-a-linux-live-system-from-a-usb-drive-how-to-update-any-ocz-ssds-firmware/) to creating a live usb for osx. I managed to get Ubuntu booted but the screen looks like a corrupt/glitch image. I can just about make out the clock on the bottom right and a few icons. I've been told that this is an easy fix and that nomodeset needs to be set for the graphics card but all the solutions i find are for a hard drive installed Ubuntu where you can cd in and edit the grub file - how do you do this is it's in an iso? Thanks Garrett

    Read the article

  • Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to get it to work?

    - by zewone
    I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686 ![Schizophrenic Ubuntu](http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) Any help much appreciated... Thanks, Philippe 31-10-2012 ... I have some more updates. When I do the following command it does see my Wifi router... So even if it is still disabled... the card seems to work and see the router (ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E") See below: sudo iwlist wlan1 scanning wlan1 Scan completed : Cell 01 - Address: 00:19:70:8F:B0:EA Channel:10 Frequency:2.457 GHz (Channel 10) Quality=51/70 Signal level=-59 dBm Encryption key:on ESSID:"5791BC26-CE9C-11D1-97BF-0000F81E" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000025dbf2188 Extra: Last beacon: 108ms ago IE: Unknown: 002035373931424332362D434539432D313144312D393742462D3030303046383145 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010A IE: Unknown: 0706424520010D14 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101030003A4000027A4000042435E0062322F00 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000

    Read the article

  • What's the story with TRIM support?

    - by Kent Boogaart
    The situation with TRIM in Ubuntu has me utterly confused. I don't know whether I need to manually run it or not. Sources I've found are disparate and unclear. I have Ubuntu 10.04 with latest updates (including kernel 2.6.32-26). I have an Intel X-25M drive with latest firmware, and it is formatted as ext4. So, does TRIM support run automatically? If not, how do I check if I need to run it, and then how do I run it if necessary?

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >