Search Results

Search found 1073 results on 43 pages for 'firmware'.

Page 26/43 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >

  • Parity Initialization after putting in two new disks

    - by lbanz
    All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

    Read the article

  • Web browsing is fast, but downloads are slow

    - by Ricket
    I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

    Read the article

  • What causes Windows Boot to stall?

    - by Nick Berardi
    For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

    Read the article

  • Time values not saving in Airport Base Station MAC Timed Access List

    - by Boiler Bill
    I have an airport base station model A1354. I am attempting to setup MAC Timed Access so a laptop can only connect between 5:00AM and 11:00pm through the Airport Utility version 5.5.2 (552.11). My AEBS is running firmware version 7.5.2 When I try to enter the time values by double clicking over the time and entering 05:00 AM and 11:00PM the time values don't stay as soon as it looses focus. Instead they become what is in the following screenshot, and the laptop looses connectivity as soon as I update the base station. I also tried entering the values in military time with the same result. Any base station power users out there that know how I can get the time values to "stick"?

    Read the article

  • Problem with bios update on Intel S3420GP

    - by wurlog
    I am using the Intel Develepment Assistant CD, but after choosing the newest update I can see a red text but just for a second. Afterwards it tells me to reboot, but it is still the same bios version as before. I can't find access the error message. The whole software seams to be a linux. Maybe I can access a console and look into the log files?? Or are there other solutions to update the bios? EDIT: I tried to download the bios/firmware update packages (using it via network share, because the usb stick wouldn't work), but the software wont use it.

    Read the article

  • What's wrong with my MAC address?

    - by Shaul
    I have a D-Link DSL-2650U router, and exactly one computer on the network. For reasons of port forwarding I want to give my computer a static internal IP address, so that I don't take the chance of losing my NAT settings every time the computer reboots. So here's a screen shot that summarizes the entire problem: WTH is wrong with my MAC address? It's copied and pasted from the command prompt window! I tried editing out the dashes, but it still doesn't work. Am I doing something wrong, or is there a bug in the D-Link firmware?

    Read the article

  • MacBook Pro Trackpad freeze / holds click on its own

    - by lajuette
    My MacBook Pro's Trackpad shows an annoying behavior in the last few days. I think the only relevant thing that changed is the firmware for the Trackpad. An update has been distributed via Software Update a few days ago. Sometimes when i click somewhere the Trackpad won't recognize the mouseup, i.e. hold the click on its own. Clicking again seems to stop the holding and issue a new mousedown, but then again, no mouseup I.e. when i click on a file on the desktop the file will be dragged. But i can't stop dragging! Clicking in a browser or text document will select the text/images. Did anyone notice similar behavior? Any ideas or fixes?

    Read the article

  • How to set up raid monitoring on a Adaptec AAC-RAID on a Dell?

    - by pjz
    I've got Debian on a Dell with an Adaptec RAID: AAC0: kernel 4.1-0[7417] AAC0: monitor 4.1-0[7417] AAC0: bios 4.1-0[7417] AAC0: serial 4edf09 scsi2 : aacraid Vendor: CERC Model: DATA 1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: CERC Model: Data 2 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 I've got it set up using the fine afacli tool (ick). Is there a way to get it to email me when there's an error? Do I need to hand-roll a script for this? what's the right version of the afacli tool to use? v4.1 gets SIGABRT and exits after I ask it to 'container list' or 'enclosure list' v2.8's enclosure commands don't work either Do I need to upgrade firmware? to what? from where? how?

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - Setup guide recommendations?

    - by Peter Mounce
    I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. My ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • SEAGATE Barracuda 7200.11 HDD not running

    - by Dane411
    After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

    Read the article

  • How do I SCP/FTP to a Coraid SR2421

    - by Pitto
    I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

    Read the article

  • Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

    - by BLAU
    My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

    Read the article

  • How to know which revision or router I do have?

    - by Rosamunda
    I´m trying to update my D-link Dir-600 router with the dd-wrt firmware. I´ve searched for it at the site and found that: Revision A1, B1 and B2 are supported, while C isn´t. Now my router has this information on the back: P/N IIR600GNA .... C1G H/W Ver: C1 F/W Ver: 3.01 So I guess the H/W Ver is the revision, and it´s C... so it´s a lost cause? Or maybe because it´s not just C but C1 I could do something with it? Thanks!

    Read the article

  • Windows 8 to 8.1 Pro Upgrade SecureBoot Error

    - by Alexandru
    I upgraded from Windows 8 to Windows 8.1. I have an Alienware Aurora R4 with the latest BIOS firmware version, A09. Ever since I did the upgrade, I get a watermark on my desktop saying, "SecureBoot isn't configured correctly"...I would like to get rid of this watermark the correct way (not by hacking system DLLs). My BIOS shows me booting in UEFI mode, and I see that SecureBoot is actually disabled from there. I cannot enable SecureBoot, in either UEFI mode or Legacy Boot mode. Note, I can't even get Legacy Boot mode working without re-formatting my system which I really don't plan on doing, so my question is this...what has changed in the way Windows handles SecureBoot? As far as I can tell, I do not have SecureBoot enabled, and it is trying to tell me that it isn't configured correctly. Why does it even care to check if my BIOS doesn't have it on anyways?! Its so frustrating!

    Read the article

  • Why can't my networks reach each other?

    - by HOLOGRAPHICpizza
    We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

    Read the article

  • Port Forwarding on Actiontec GT704-WG Router Issues

    - by adamweeks
    I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

    - by Peter Mounce
    I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

    - by Peter Mounce
    Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • iSCSI SAN RAID 10 Performance -- Poor Read, Good Write

    - by Litzner
    I have a EqualLogic PS4000 SAN unit with the latest firmware, setup in RAID 10. I have 3 2TB Volumes on the SAN shared out via iSCSI on 2 eth ports on two different subnets. I have moved a test server over to this newly setup SAN, and my testing is showing me a problem. I am getting dismal read performance in everything except a test with 32 queue depth (see attach image) Write performance seems to be right about where it should be. I have tried MPIO on and off, on was slightly better but not much.

    Read the article

  • Why such a dramatic difference in wireless router max. simultaneous connections?

    - by Jez
    Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

    Read the article

  • Can a consumer wireless router act as both a wireless client and access point?

    - by glibdud
    I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

    Read the article

  • Sun T1000 Fan Noise - Big Issue

    - by Ed Austin
    Long and short, the T1000 makes more noise than 7 HP Servers combined. Firmware updated to latest version. PICL running under Solaris OK. Diagnostics all OK. It is driving us mad. We have a server room in our small office and we can hear this baby through thick concrete.... I cannot believe Sun doesn't mention how loud they are.... thought this was an environmentally friendly server.. Help really appreciated before it drives us all mad.

    Read the article

  • My iPhone is stuck at screen with USB cable and iTunes logo

    - by alex
    I just tried updating the iPhone's firmware, and things went haywire. iTunes informed the update had failed and linked me to this page. The iPhone is stuck on the image from the top of that page. I held down the sleep and home buttons until it turned off and turned it back on, and then went through the iPhone's 'restore' mode. It then error'd again and I'm stuck back with the logos on the iPhone. Does anyone know how to fix this? Thanks

    Read the article

  • I'm using a compatible active DisplayPort to DVI adapter with EyeFinity, why does my monitor still flicker?

    - by Christopher Galpin
    I specifically chose an active DisplayPort <- DVI adapter for use with EyeFinity right out of my graphic card vendor's list of confirmed compatible adapters. Yet the screen fails horribly, it blinks on and off constantly, sometimes the graphics go screwy and the appropriate resolutions won't be available. Sometimes the resolution will be available but I'll discover it's only with interlaced refresh rates and bounces up and down. I have to switch the resolution back and forth, again and again, to get it to work correctly, and then it fails again and the process must be repeated the moment the monitor is turned off or I reboot. It's maddening. What is wrong? Is my GFX card supplying insufficient voltage? (Firmware tweaks allegedly help some people, but my card's isn't modifiable.) Could the adapter be defective? Is it not "active" enough for my card and I need an expensive powered adapter? Is this endemic to DisplayPort in general?

    Read the article

  • Port forwarding on D-Link DIR-615 super-slow, useless

    - by Jaroslav Záruba
    Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless. Accessing the router itself (admin UI) is without issues, no delay whatsoever. But when I try to access a service on another computer in the network the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine turning off firewall on the target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

    Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33  | Next Page >