Search Results

Search found 1367 results on 55 pages for 'kyle west'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 19/55 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Linux machine can't find its tape drive

    - by Kyle Hodgson
    I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

    Read the article

  • New Whitepaper: Primer on Integrating with EBS 12 with Other Applications

    - by Rekha Ayothi
    Oracle E-Business Suite offers several integration points and a variety of integration technologies. While a given integration point may be available through various technologies and products, it is important to select the best approach for your specific integration requirements. I am pleased to announce the publication of a new white paper that can help with this: Oracle E-Business Suite Release 12.1.3 - Integration Products and Technologies Primer (Note 1494997.1) This whitepaper reviews integration strategies for Oracle E-Business Suite applications that are available today. The intended audience is solution architects, integration consultants, and anyone else interested in learning about integration options with Oracle E-Business Suite. The white paper outlines the following enterprise application integration styles: Data-centric integration Integration through native interfaces Process-centric integration Event-driven integration B2B integration Integration through web services  The white paper also discusses Oracle E-Business Suite application layer products and technologies that address the specific needs of each of these integration styles. It concludes with criteria for selecting the appropriate integration-related tools and technologies for your requirements. Attending OpenWorld 2012? We have two sessions covering Oracle E-Business Suite integration. Please join us to hear more on this subject: CON9005 - Oracle E-Business Suite Integration Best Practices ( Tuesday, Oct 2, 1:15 PM - 2:15 PM - Moscone West 2018) CON8716 - Web Services and SOA Integration Options for Oracle E-Business Suite ( Thursday, Oct 4, 11:15 AM - 12:15 PM - Moscone West 2016)  Related Articles E-Business Suite Technology Sessions at OpenWorld 2012 Webcast Replay Available: SOA Integration Options for E-Business Suite BPEL 11.1.1.6 Certified for Prebuilt E-Business Suite 12.1.3 SOA Integrations New Whitepaper: Defining Web Applications Desktop Integrators That Return Error Messages

    Read the article

  • How Does Failover Clustering Work in Windows 2008 R2?

    - by Kyle Brandt
    I am trying to learn how the failover clustering features works with Windows 2008 R2 as I am going to be using as part of SQL Server 2012 always on. I have been able to find information on how to set it up, and what it does. However, I am having trouble finding a nice technical document on how it actually works in detail (For example with keepalived there are docs that explain how often are heartbeat packets sent, what they look like etc). I know this is a pretty broad question, but I would like to have a good understanding of mechanisms of this feature.

    Read the article

  • Where are my Vista documents?

    - by Kyle Sevenoaks
    Hi, on my compputer here at work, the motherboard on one machine decided to fry over the weekend, all of my saved work is on the harddrive here, it has Vista Business as it's OS and my documents were in My Documents. I have since moved the HDD over to a new computer and am trying to locate these files, as I can't work without them and it's not a case of doing it again, this is over three months work. There were three user accounts, mine, my bosses and a guest accont. Where are these My Documents? How can I get them? Thanks for any help you can provide :)

    Read the article

  • Dynamips and Tap Devices, To and From the same machine

    - by Kyle Brandt
    I am setting up a dynamips/dynagen lab and am wondering if there is any way to get traffic to route out one tap devices, go into the lab, and come back to a tap device on the same machine. I have tried host specific routes as well as removing the route created when I give the tun device an ip via ifconfig. With both of these, traffic always preferes the attached devices and won't go through my lab. Any way to make this work without a separate machine or vm?

    Read the article

  • Announcing Fusion Middleware Innovation Awards

    - by Michelle Kimihira
    Author: Neela Chaudhari Every year at OpenWorld, Oracle announces the winners to its most prestigious awards in Middleware, the Fusion Middleware Innovation Awards. This year, we’ll be announcing the winners and highlighting a few of their original implementations during this key session in the Middleware stream: 11:45 AM on Tuesday, October 2nd, CON9162 Oracle Fusion Middleware: Meet This Year's Most Impressive Customer Projects in Moscone West, 3001. In addition, we’ll give a sneak peak of a few winners during GEN9394: Fusion Middleware General Session with Hasan Rizvi at 10:15 AM on Tuesday, October 2nd in Moscone West, Hall D! What kinds of customers win the Fusion Middleware Innovation Awards? Winners are selected based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. The winners are selected by a panel of judges that score each entry across multiple different scoring categories. This year, the following categories included: Oracle Exalogic Cloud Application Foundation Service Integration (SOA) and BPM WebCenter Identity Management Data Integration Application Development Framework and Fusion Development Business Analytics (BI, EPM and Exalytics) Last year at OpenWorld 2011 we had standing room only in our session, so come early!  We had over 30 innovative customers that won the award, including companies like BT, Choice Hotels, Electronic Arts, Clorox Company, ING, Dunkin Brands, Telenor, Haier, AT&T, Manpower, Herbal Life and many others. Did you miss your chance this year to nominate your company? Come join with us in the awards session to get an edge in your next year’s submission and watch for the next opportunity for 2013 on this blog. There’s other awards as part of Oracle’s Excellence awards program or subscribe to our regular Fusion Middleware newsletter to get the latest reminders.

    Read the article

  • IIS running but not serving content

    - by Kyle
    I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

    Read the article

  • Oracle OpenWorld Series: Fusion Middleware Lineup

    - by Michelle Kimihira
    With Oracle OpenWorld just days away, I just wanted to highlight once again these three must-attend session: Monday, 10/1 10:45 AM – 11:45 AM GEN9504 - General Session: Innovation Platform for Oracle Apps, Including Fusion Applications Amit Zavery, Vice President, Fusion Middleware Product Management Strategy and roadmap session for Fusion Middleware for Enterprise Applications with customers, Boeing, Electronic Arts and Underwriters Laboratories Moscone West, 3002/3004 Tuesday, 10/2 10:15 AM – 11:15 AM GEN9394 - General Session: Oracle Fusion Middleware Strategies Driving Business Innovation Hasan Rizvi, Executive Vice President of Product Development Strategy and roadmap session for Fusion Middleware with customers, Nintendo, Los Angeles Dept. of Water & Power and Nike Moscone North, Hall D Tuesday, 10/2 11:45 AM – 12:45AM CON9162 – Oracle Fusion Middleware: Meet This Year’s Most Impressive Customer Projects Hear from the winners of the 2012 Oracle Fusion Middleware Innovation Awards and see which customers are taking home a trophy for the 2012 Oracle Fusion Middleware Innovation Award.  Read more about the Innovation Awards here. Moscone West, 3001 Be sure to check out the individual Focus On documents to serve as your roadmap to must-attend sessions and demos. All other Focus On documents can be found here. Best of Oracle Fusion Middleware Mobile Computing Fusion Middleware for Enterprise Applications Oracle ADF and Fusion Development Business Process Management Oracle Coherence Cloud Application Foundation Oracle WebLogic Server Data Integration SOA and BPM Exalogic Elastic Cloud SOA for Developers Identity Management Social Master Data Management WebCenter   We look forward to seeing you at Oracle OpenWorld and in our Fusion Middleware sessions! Additional Information ·         Relevant Blogs: Oracle OpenWorld Countdown Begins ,  Best of Oracle Fusion Middleware, Fusion Middleware for Enterprise Applications, Amit Zavery’s General Session, Hasan Rizvi’s General Session, All Things Mobile, Oracle OpenWorld Blog ·         Product Information on Oracle.com: Oracle Fusion Middleware ·         Subscribe to our regular Fusion Middleware Newsletter ·         Follow us on Twitter and Facebook

    Read the article

  • How to Set Linux Bonding Interface to Gigabit

    - by Kyle Brandt
    I have enabled Linux active backup mode bonding. Each interface is a gigabit interface, but the bond interface seems to end up at 100 Megabit: bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full. ... bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON ... bonding: bond0: backup interface eth1 is now up ethtool apparently can't provide info on bond: sudo ethtool bond0 Settings for bond0: No data available So does this mean I am operating at 100 or 1000 Megabit (My guess is 1000)? If it is only 100, what options in the ifcfg scripts or the modprobe bonding options do I need to sett to make it 1000?

    Read the article

  • Can't get an IBM xSeries 345 server to load Windows Server 2003 using ServerGuide utility

    - by Kyle Noland
    I have a client that has an IBM xSeries 345 eServer. Per the IBM support website, I have downloaded the ServerGuide Setup 7.4.17 installation ISO and burned a bootable CD. The CD boots fine and loads the utility. I walk through the following screens without any issue: Set the date and Time Detect the IBM ServeRAID card and install the latest firmware Clear the hard disks Set up the RAID array The next step is format the NOS partition. I select my partition size and the utility goes through the following steps: Creating NOS partition Formatting NOS partition (NTFS) Copying W32 files The copying W32 files takes about 10 minutes. I see the CD drive and disks working hard. When the copying is complete, I'm taken to a blank page just NOS Partitioning at the top. At the bottom of the screen are the familiar Back and Exit buttons. I see the place where the Next button should be, and if I click on it I can tell there is something there, but the space is empty. No button is displayed and clicking the empty spot doesn't ever take me to the next screen. I can't load the OS until I get past this part. I have already tried: Burning multiple copies and versions of the ServerGuide CD Letting the final screen just sit there over the weekend thinking it might advance after syncing the drives or something Has anybody else seen this? I'm really at a loss here.

    Read the article

  • Cisco QoS Guidence

    - by Kyle Brandt
    I have a 10M connection to the internet that is hooked into a 100M port. I am getting started with QoS, and am hopping for a little guidance on setting it up on a Cisco 3825 router. Right now I am going forward with the idea that I have to implement it on my router, and the provider can't provide QoS for me. How I envision it working is that the QoS will drop or queue packets on my router and that will help prevent a situation where the provider has to start dropping a lot of packets. Right now all I am tasked with is making sure that one of the 3 LANs gets a certain slice (say 3M for Gig Lan1) of the 10M internet connection (But ideally this will be more flexible in the Future). 10M Internet on 100M port on HWIC-4ESW +-----------------------+ | | Gig Lan1 | Cisco 3825 | Lan3 on HWIC-4ESW | | +-----------------------+ Gig Lan2 I need to learn more about QoS, but having a target technology and maybe example configuration will help me wrap my head around the reading I am doing a little more. Which Cisco QoS Technology do you recommend for this particular situation? Have a basic sample config of how this might work? Right now the 10M line is not congested, so this more to have something in place in case it starts to become mildly congested in the future.

    Read the article

  • Server Fault Wiki: How does Subnetting Work?

    - by Kyle Brandt
    How does Subnetting Work, and How do you do it by hand or in your head? Can someone explain both conceptually and with several examples? Server Fault gets lots of subnetting homework questions, so we could use an answer to point them to on Server Fault itself. If I have a network, how do I figure out how to split it up? If I am given a netmask, how do I know what the network Range is for it? Sometimes there is a slash followed by a number, what is that number? Sometimes there is a subnet mask, but also a wildcard mask, they seem like the same thing but they are different? Someone mentioned something about knowing binary for this? Not looking for links to other sites (unless maybe you have one post with a bunch of good ones). I already know how to subnet, I just thought it would be nice if Server Fault had a generic subnetting answer.

    Read the article

  • MDB2, Pear, Mysql error

    - by Kyle Hudson
    ORIGINALLY POSTED ON http://stackoverflow.com/questions/2682332/mdb2-pear-mysql-error however as its a server issue thought i may have more luck here. Hi Guys, I have PEAR, MDB2 and Mysql Driver installed however I keep getting: Fatal error: Call to undefined function: MDB2_Driver_mysql::_isNewLinkSet(). in /home/**/PEAR/MDB2.php on line 1937. The Server is CentOS I am stuck, any help would be appriciated. Thanks :)

    Read the article

  • Is MozyHome Remote Backup known to slow down Windows Explorer?

    - by Kyle Estes
    Windows Explorer on my home machine is uber slow, and I suspect it is Mozy's fault. In the past Mozy has done some goofy stuff like placing file and folder icon overlays in Windows Explorer, which was really bugging me because I thought they were from TortoiseSVN (and I had uninstalled that!). Anyhow, does anyone else have Mozy installed? Is Windows Explorer really slow respond for you, say when you simply double click the hard drive to browse files? I'd also welcome any tips people might have on debugging why Windows Explorer might be slow (shell extensions known to cause problems, etc.).

    Read the article

  • Wine and Kernel Access

    - by Kyle Rozendo
    My knowledge on the topic is rather limited, but does one have Kernel access/the general ability to change programs at run time whilst running Wine? For Clarification: Can the user of the computer access any information they want via the Kernel on the underlying system running Wine, or does normal Windows security still apply?

    Read the article

  • Confusion about HSRP Groups

    - by Kyle Brandt
    If I have a router that has several LANs on it, and each of these LAN is attached to a second router, do I need to use different HSRP groups for each LAN? With this set up, each virtual gateway will be on a Layer 2 segment. And within a router, no interface will have multiple gateways. So, For example: Router 1: F0/0: ip address 192.168.1.2 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.2 255.255.255.0 standby ip 192.168.2.1 Router 2: F0/0: ip address 192.168.1.3 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.3 255.255.255.0 standby ip 192.168.2.1 Will this work, or do I need standby 1 ip 192.168.2.1 on the F2/0 interfaces? Since according to the RFC, the group number of the packet is in the HSRP multicast packets, my guess is that I don't need different groups, and that multiple groups are only needed when they are all on the same Layer 2 segment. However, I haven't been able to find this setup....

    Read the article

  • Only One Month to OpenWorld-San Francisco!

    - by Stephen Slade
    From around the world, the city is expecting 50,000+ guests to flock to this annual extravaganza.  Over 2,000 sessions will focus on Oracle’s latest product offerings, customer case studies, panels of experts and a variety of other hardware, technology, middleware and applications. For those interested  in the latest capabilities delivered by Oracle’s supply chain applications, the ‘Focus-On’ documents are now avaiable to help guide you in your schedule builder. Schedule builder allows the capability to create a personalized agenda for the sessions you wish to attend, such as: Monday October 1, 2012 TIME TITLE LOCATION  3:15 pm –4:15 pm General Session: Supply Chain Management—Strategy, Update, and Roadmap Richard Jewell, Senior Vice President, Applications Development, Oracle Moscone West Level 2 Room 3014 Tuesday October 2, 2012 TIME TITLE LOCATION  10:15 am –11:15 am Oracle Fusion Supply Chain Management: Overview, Strategy, Customer Experiences, and Roadmap Jon Chorley, CSO & VP, Product Strategy, Oracle Moscone West  Level 2 Room 2006 There is an exciting lineup of about 100 supply chain sessions at OpenWorld. Contact your sales rep or Oracle Partner to obtain a copy of the most current Focus-On document, segmented by pillars such as Manufacturing, Maintenance/EAM, Value Chain Planning, Value Chain Execution, Procurement and Agile/Product Lifecycle Management.  They will provide you with a better informed view to schedule your time in San Francisco.

    Read the article

  • Select tool to minimize JavaScript and CSS size

    - by Michael Freidgeim
    There are multiple ways and techniques how to combine and minify JS and CSS files.The good number of links can be found in http://stackoverflow.com/questions/882937/asp-net-script-and-css-compression and in http://www.hanselman.com/blog/TheImportanceAndEaseOfMinifyingYourCSSAndJavaScriptAndOptimizingPNGsForYourBlogOrWebsite.aspx There are 2 major approaches- do it during build or at run-time.In our application there are multiple user-controls, each of them required different JS or CSS files, and they loaded dynamically in the different combinations. We decided that loading all JS or CSS files for each page is not a good idea, but for each page we need to load different set of files.Based on this combining files on the build stage does not looks feasible.After Reviewing  different links I’ve decided that squishit should fit to our needs. http://www.codethinked.com/squishit-the-friendly-aspnet-javascript-and-css-squisherDifferent limitations of using SquishIt.We had some browser specific CSS files, that loaded conditionally depending of browser type(i.e IE and all other browsers). We had to put them in separate bundles,For Resources and AXD files we decide to use HttpModule and HttpHandler created by Mads KristensenTo GZIP html we are using wwWebUtils.GZipEncodePage() http://www.west-wind.com/weblog/posts/2007/Feb/05/More-on-GZip-compression-with-ASPNET-Content Just swap the order of which encoding you apply to start by asking for deflate support and then GZip afterwards.Additional tips about SquishIt.Use CDN: https://groups.google.com/group/squishit/browse_thread/thread/99f3b61444da9ad1Support intellisense and generate bundle in codebehind http://tech.kipusoep.nl/2010/07/23/umbraco-45-visual-studio-2010-dotless-jquery-vsdoc-squishit-masterpages/Links about other Libraries that were consideredA few links from http://stackoverflow.com/questions/5288656/which-one-has-better-minification-between-squishit-and-combres2.Net 4.5 will have out-of-the-box tools for JS/CSS combining.http://weblogs.asp.net/scottgu/archive/2011/11/27/new-bundling-and-minification-support-asp-net-4-5-series.aspx . It suggests default bundle of subfolder, but also seems supporting similar to squishit explicitly specified files.http://www.codeproject.com/KB/aspnet/combres2.aspx  config XML file can specify expiry etchttps://github.com/andrewdavey/cassette http://stackoverflow.com/questions/7026029/alternatives-to-cassetteDynamically loaded JS files requireJS http://requirejs.org/docs/start.html  http://www.west-wind.com/weblog/posts/2008/Jul/07/Inclusion-of-JavaScript-FilesPack and minimize your JavaScript code sizeYUI Compressor (from Yahoo)JSMin (by Douglas Crockford)ShrinkSafe (from Dojo library)Packer (by Dean Edwards)RadScriptManager  & RadStyleSheetManager -fromTeleric(not free)Tools to optimize performance:PageSpeed tools family http://code.google.com/intl/ru/speed/page-speed/download.htmlv

    Read the article

  • Where would a wildcard DNS record be prioritized?

    - by Kyle
    I have a DNS setup going on where I have several subdomains that cname out to google apps, but I was wondering if I could wildcard the rest of my subdomains, and have my google apps cname correctly. In other words, would the records that aren't a wildcards be parsed before the wildcard record?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >