Search Results

Search found 9134 results on 366 pages for 'live streaming'.

Page 19/366 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • "Loading operating system... boot error" when booting from live CD

    - by jeremy
    I'm having a problem installing Ubuntu 12.10 on a new drive. I was running Windows7 on my SSD but when the drive crashed, I decided to use that as an excuse to make the switch to Ubuntu. I've been experimenting with it on my old laptop until I got my SSD replaced under warranty. Now I have my SSD back and want to install Ubuntu on my desktop machine. I used UNetbootin to make a bootable flash drive. I then I went into my BIOS and made sure USB loaded before the hard drive. However, when I try to load it I get an error that says: Loading operating system ... boot error I know the flash drive works because if I reboot my laptop or my other Windows PC with the flash drive and it loads into Ubuntu...just when I try to do it in the PC with no OS currently on the drive.

    Read the article

  • Make a Drive Image Using an Ubuntu Live CD

    - by Trevor Bekolay
    Cloning a hard drive is useful, but what if you have to make several copies, or you just want to make a complete backup of a hard drive? Drive images let you put everything, and we mean everything, from your hard drive in one big file. With an Ubuntu Live CD, this is a simple process – the versatile tool dd can do this for us right out of the box. We’ve used dd to clone a hard drive before. Making a drive image is very similar, except instead of copying data from one hard drive to another, we copy from a hard drive to a file. Drive images are more flexible, as you can do what you please with the data once you’ve pulled it off the source drive. Your drive image is going to be a big file, depending on the size of your source drive – dd will copy every bit of it, even if there’s only one tiny file stored on the whole hard drive. So, to start, make sure you have a device connected to your computer that will be large enough to hold the drive image. Some ideas for places to store the drive image, and how to connect to them in an Ubuntu Live CD, can be found at this previous Live CD article. In this article, we’re going to make an image of a 1GB drive, and store it on another hard drive in the same PC. Note: always be cautious when using dd, as it’s very easy to completely wipe out a drive, as we will show later in this article. Creating a Drive Image Boot up into the Ubuntu Live CD environment. Since we’re going to store the drive image on a local hard drive, we first have to mount it. Click on Places and then the location that you want to store the image on – in our case, a 136GB internal drive. Open a terminal window (Applications > Accessories > Terminal) and navigate to the newly mounted drive. All mounted drives should be in /media, so we’ll use the command cd /media and then type the first few letters of our difficult-to-type drive, press tab to auto-complete the name, and switch to that directory. If you wish to place the drive image in a specific folder, then navigate to it now. We’ll just place our drive image in the root of our mounted drive. The next step is to determine the identifier for the drive you want to make an image of. In the terminal window, type in the command sudo fdisk -l Our 1GB drive is /dev/sda, so we make a note of that. Now we’ll use dd to make the image. The invocation is sudo dd if=/dev/sda of=./OldHD.img This means that we want to copy from the input file (“if”) /dev/sda (our source drive) to the output file (“of”) OldHD.img, which is located in the current working directory (that’s the “.” portion of the “of” string). It takes some time, but our image has been created…Let’s test to make sure it works. Drive Image Testing: Wiping the Drive Another interesting thing that dd can do is totally wipe out the data on a drive (a process we’ve covered before). The command for that is sudo dd if=/dev/urandom of=/dev/sda This takes some random data as input, and outputs it to our drive, /dev/sda. If we examine the drive now using sudo fdisk –l, we can see that the drive is, indeed, wiped. Drive Image Testing: Restoring the Drive Image We can restore our drive image with a call to dd that’s very similar to how we created the image. The only difference is that the image is going to be out input file, and the drive now our output file. The exact invocation is sudo dd if=./OldHD.img of=/dev/sda It takes a while, but when it’s finished, we can confirm with sudo fdisk –l that our drive is back to the way it used to be! Conclusion There are a lots of reasons to create a drive image, with backup being the most obvious. Fortunately, with dd creating a drive image only takes one line in a terminal window – if you’ve got an Ubuntu Live CD handy! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayHow to Browse Without a Trace with an Ubuntu Live CDWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy WayClone a Hard Drive Using an Ubuntu Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace

    Read the article

  • Is Live Chat a valuable feature?

    - by Jim
    Does having a live chat feature on a website increase conversions enough to cover the cost administration? Most of the data I have found comes from companies selling live chat solutions and is unreliable in my opinion. Do users find this as a valuable feature or an annoyance? Personally, I'm annoyed by sites that use live chat especially when a little box pops up without my explicit request, but if users find this valuable then I should consider implementing it. Any concrete data is appreciated.

    Read the article

  • Presenting at VS Live! Orlando in December

    - by Steve Michelotti
    I’ll be presenting at VS Live! December 10-14 in Orlando, FL. I’ll be presenting Azure Web Sites. This is the session abstract: Azure Web Sites brings a whole new level of power and simplicity to cloud computing. This demo-heavy session will show numerous features that allow you to deploy your site in a matter of seconds. Whether you are building a completely custom app or deploying from one of the numerous templates provided (such as WordPress), you’ll be up and running in no time. Want to use Node.js or PHP and deploy from Git? No problem! Azure Web Sites gives you the power of elastic scaling while still providing streamlined development and an effortless deployment experience. This presentation will also cover features including monitoring, custom domains, working with SQL databases or more!   SPECIAL OFFER: As a speaker, I can extend $500 savings on the 5-day package. Register here: http://bit.ly/VOSPK19Reg  and use code VOSPK19. The great part about Visual Studio Live!: four events in one! This year, the event will be co-located with SQL Server Live!, SharePoint Live!, and Cloud & Virtualization Live!. You can customize your conference agenda and attend ANY sessions from all four events. Register now: http://bit.ly/VOSPK19Reg

    Read the article

  • remastersys created Live DVD hangs in "Choose a picture"

    - by eos2012
    I used remastersys to create a Live DVD. Then, I used the Live DVD for the installation on another computer. The installation hung at the "Choose a picture" session. Both the "Back" and "Continue" buttons were disabled. It seemed like the installation was hung. I had to power-cycle the computer and reinstall from the Live DVD again. After the power-cycle, the installation from the Live DVD went successfully. Any idea why the installation hung at the "Choose a picture" session, and how to fix it without power-cycle the computer? Thanks a lot!

    Read the article

  • Silverlight 4 Launch Event – Watch it live

    - by guybarrette
    The Silverlight 4 Launch Event will be available in streaming live from DevConnections on Tuesday April 13th 2010.  Check www.silverlight.net for more info. BTW, wearing a red shirt is mandatory for watching.  The streaming police will disconnect you if you don’t  ;-)   Photo via Katrien’s blog var addthis_pub="guybarrette";

    Read the article

  • Live Mesh beta on Windows 7 - Did anybody get it working?

    - by Andrew J. Brehm
    I have Live Mesh beta installed on 64 bit Windows 7 but cannot connect to the computer remotely. The "Manage devices" page gives this information: This device is synchronizing but cannot be remotely accessed. Check the Live Mesh notifier on the device to see if Live Mesh remote desktop enhancements need to be installed. However, I cannot find instructions on how to use the "notifier" to "see" if Live Mesh remote desktop enhancements are installed or how I could install them. When I originally installed (both times) Mesh I did tell it to install "remote desktop enhancements". Does this just not work with Windows 7 and/or 64 bit?

    Read the article

  • How can I download and make an Ubuntu CD from inside a booted Ubuntu Live CD?

    - by miguel
    I have an older laptop with a ADA hard disk I can't really buy a new one so I want to erase Windows Vista on my computer and only have Ubuntu so that I can have more space. How do I make it go directly to my blank CD? My Windows Vista is messed up and I can't even get into it. I want to download the new version of Ubuntu while in Ubuntu. I downloaded it but it didn't go directly to the blank CD. I tried to copy all of Ubuntu onto the CD once it was downloaded but it says there was an error while copying. What should I do?

    Read the article

  • Why isn't persistence working on Lubuntu 12.04 Live-USB?

    - by Frodik
    I have used Universal-USB-Installer ever since to install different Linux versions to USB flash drive. But now with Lubuntu 12.04 even though I do the same process by selecting persistence file, it gets created but is never used in Lubuntu. Every time I boot into Lubuntu on flash, it is fresh new Lubuntu without my changes I did last time I have booted it. Anyone can help me or give me some hints ? Thanks in advance.

    Read the article

  • jQuery event handling with .live() problem with setInterval and clearInterval

    - by Kyle Lafkoff
    jQuery 1.4.2: I have an image. When the mouseover event is triggered, a function is executed that runs a loop to load several images. On the contrary, the mouseout event needs to set the image back to a predetermined image and no longer have the loop executing. These are only for the images with class "thumb": $("img.thumb").live("mouseover mouseout", function(event) { var foo = $(this).attr('id'); var wait; var i=0; var image = document.getElementById(foo); if (event.type == 'mouseover') { function incrementimage() { i++; image.src = 'http://example.com/images/file_'+i+'.jpg'; if(i==30) {i=0;} } wait = setInterval(incrementimage,500); } else if (event.type == 'mouseout') { clearInterval (wait); image.src = 'http://example.com/images/default.jpg'; } return false; }); When I mouseout, the image is set to the default.jpg but the browser continues to loop though the images. It will never stop. Can someone hit me with some knowledge? Thanks.

    Read the article

  • how to add jquery live to lightbox v2?

    - by Mahmoud
    Hey all I am trying to create a page that well display a gallery image, when the user clicks on any images it inlarges using lightbox v2 now after that i adding on each image a button that well submit to jcart script which well add to cart, but when the user click on the button it refreshes. so i wanted to use jquery live to submit to jcart without closing the lightbox v2 but i still dont know how to do? code used inside lightbox title is <form class="jcart" method="post" action="" name = "add" > <input type="hidden" name="id" value="".$row['pro_num']."" /> <input type="hidden" name="name" value="".$row['pro_name']."" /> <input type="hidden" name="price" value="".$row['pro_price']."" /> <input type="hidden"name="qty" size = "1" value="1" /> <br /> <input type="image" value="Submit" name="addto" src = "images/add.png" /> </form>

    Read the article

  • Live wallpaper settings not applying

    - by Steve
    I have added settings to my live wallpaper but they are not being applied when changed. I would greatly appreciate it if someone could tell me why my settings are not being applied when changed. Here is my code: settings.xml <PreferenceCategory android:title="@string/more"> <PreferenceScreen android:title="@string/more"> <intent android:action="android.intent.action.VIEW" android:data="market://search?q=pub:PSP Demo Center" /> </PreferenceScreen> <ListPreference android:persistent="true" android:enabled="true" android:entries="@array/settings_light_number_options" android:title="@string/settings_light_number" android:key="light_power" android:summary="@string/settings_light_number_summary" android:defaultValue="3" android:entryValues="@array/settings_light_number_optionvalues" /> <ListPreference android:persistent="true" android:enabled="false" android:entries="@array/settings_speed_number_options" android:title="@string/settings_speed_number" android:key="speed" android:summary="@string/settings_speed_number_summary" android:defaultValue="10" android:entryValues="@array/settings_speed_number_optionvalues" /> <ListPreference android:persistent="true" android:enabled="false" android:entries="@array/settings_rotate_number_options" android:title="@string/settings_rotate_number" android:key="rotate" android:summary="@string/settings_rotate_number_summary" android:defaultValue="8000" android:entryValues="@array/settings_rotate_number_optionvalues" /> </PreferenceCategory> </PreferenceScreen> Settings.java public class GraffitiLWPSettings extends PreferenceActivity implements SharedPreferences .OnSharedPreferenceChangeListener { public static final String SHARED_PREFS_NAME = "wallpaper_settings"; protected void onCreate(Bundle icicle) { super.onCreate(icicle); getPreferenceManager(). setSharedPreferencesName(GraffitiLWP.SHARED_PREFS_NAME); addPreferencesFromResource(R.xml.settings); getPreferenceManager().getSharedPreferences(). registerOnSharedPreferenceChangeListener(this); } protected void onResume() { super.onResume(); } protected void onDestroy() { getPreferenceManager().getSharedPreferences() .unregisterOnSharedPreferenceChangeListener(this); super.onDestroy(); } public void onSharedPreferenceChanged(SharedPreferences sharedPreferences, String key) { } } wallpaper.java public class GraffitiLWP extends Wallpaper { private GraffitiLWPRenderer mRenderer; public static final String SHARED_PREFS_NAME = "wallpaper_settings"; public Engine onCreateEngine() { mRenderer = new GraffitiLWPRenderer(this); return new WallpaperEngine( this.getSharedPreferences(SHARED_PREFS_NAME, Context.MODE_PRIVATE), getBaseContext(), mRenderer); } } renderer.java public class GraffitiLWPRenderer extends RajawaliRenderer { private Animation3D mAnim; private BaseObject3D mCan; private SettingsUpdater settingsUpdater; //private SharedPreferences preferences; public GraffitiLWPRenderer(Context context) { super(context); setFrameRate(20); } public class SettingsUpdater implements SharedPreferences .OnSharedPreferenceChangeListener { private GraffitiLWPRenderer renderer; public SettingsUpdater(GraffitiLWPRenderer renderer) { this.renderer = renderer; } public void onSharedPreferenceChanged( SharedPreferences sharedPreferences, String key) { preferences.getInt("wallpaper_settings", 0); renderer.setSharedPreferences(preferences); } } public void initScene() { System.gc(); ALight light = new DirectionalLight(); light.setPower(this.preferences.getLong("light_power", 3)); light.setPosition(0, 0, -10); mCamera.setPosition(0, -1, -7); mCamera.setLookAt(0, 2, 0); mCamera.setFarPlane(1000); ObjParser parser = new ObjParser(mContext .getResources(), mTextureManager, R.raw.spraycan_obj); parser.parse(); mCan = parser.getParsedObject(); mCan.addLight(light); mCan.setScale(1.2f); addChild(mCan); Number3D axis = new Number3D(0, this.preferences.getLong("speed", 10), 0); axis.normalize(); mAnim = new RotateAnimation3D(axis, 360); mAnim.setDuration(this.preferences.getLong("rotate", 8000)); mAnim.setRepeatCount(Animation3D.INFINITE); mAnim.setInterpolator(new AccelerateDecelerateInterpolator()); mAnim.setTransformable3D(mCan); setSkybox(R.drawable.posz, R.drawable.posx, R.drawable.negz, R.drawable.negx, R.drawable.posy, R.drawable.negy); } public void onSurfaceCreated(GL10 gl, EGLConfig config) { settingsUpdater = new SettingsUpdater(this); this.preferences.registerOnSharedPreferenceChangeListener( settingsUpdater); settingsUpdater.onSharedPreferenceChanged(preferences, null); super.onSurfaceCreated(gl, config); mAnim.start(); } public void onDrawFrame(GL10 glUnused) { super.onDrawFrame(glUnused); mSkybox.setRotY(mSkybox.getRotY() + .5f); } } I know the code is long but I would greatly appreciate any help that someone could give me. Thank you.

    Read the article

  • Jquery Live Function

    - by marharépa
    Hi! I want to make this script to work as LIVE() function. Please help me! $(".img img").each(function() { $(this).cjObjectScaler({ destElem: $(this).parent(), method: "fit" }); }); the cjObjectScaler script (called in the html header) is this: (thanks for Doug Jones) (function ($) { jQuery.fn.imagesLoaded = function (callback) { var elems = this.filter('img'), len = elems.length; elems.bind('load', function () { if (--len <= 0) { callback.call(elems, this); } }).each(function () { // cached images don't fire load sometimes, so we reset src. if (this.complete || this.complete === undefined) { var src = this.src; // webkit hack from http://groups.google.com/group/jquery-dev/browse_thread/thread/eee6ab7b2da50e1f this.src = '#'; this.src = src; } }); }; })(jQuery); /* CJ Object Scaler */ (function ($) { jQuery.fn.cjObjectScaler = function (options) { /* user variables (settings) ***************************************/ var settings = { // must be a jQuery object method: "fill", // the parent object to scale our object into destElem: null, // fit|fill fade: 0 // if positive value, do hide/fadeIn }; /* system variables ***************************************/ var sys = { // function parameters version: '2.1.1', elem: null }; /* scale the image ***************************************/ function scaleObj(obj) { // declare some local variables var destW = jQuery(settings.destElem).width(), destH = jQuery(settings.destElem).height(), ratioX, ratioY, scale, newWidth, newHeight, borderW = parseInt(jQuery(obj).css("borderLeftWidth"), 10) + parseInt(jQuery(obj).css("borderRightWidth"), 10), borderH = parseInt(jQuery(obj).css("borderTopWidth"), 10) + parseInt(jQuery(obj).css("borderBottomWidth"), 10), objW = jQuery(obj).width(), objH = jQuery(obj).height(); // check for valid border values. IE takes in account border size when calculating width/height so just set to 0 borderW = isNaN(borderW) ? 0 : borderW; borderH = isNaN(borderH) ? 0 : borderH; // calculate scale ratios ratioX = destW / jQuery(obj).width(); ratioY = destH / jQuery(obj).height(); // Determine which algorithm to use if (!jQuery(obj).hasClass("cf_image_scaler_fill") && (jQuery(obj).hasClass("cf_image_scaler_fit") || settings.method === "fit")) { scale = ratioX < ratioY ? ratioX : ratioY; } else if (!jQuery(obj).hasClass("cf_image_scaler_fit") && (jQuery(obj).hasClass("cf_image_scaler_fill") || settings.method === "fill")) { scale = ratioX < ratioY ? ratioX : ratioY; } // calculate our new image dimensions newWidth = parseInt(jQuery(obj).width() * scale, 10) - borderW; newHeight = parseInt(jQuery(obj).height() * scale, 10) - borderH; // Set new dimensions & offset jQuery(obj).css({ "width": newWidth + "px", "height": newHeight + "px"//, // "position": "absolute", // "top": (parseInt((destH - newHeight) / 2, 10) - parseInt(borderH / 2, 10)) + "px", // "left": (parseInt((destW - newWidth) / 2, 10) - parseInt(borderW / 2, 10)) + "px" }).attr({ "width": newWidth, "height": newHeight }); // do our fancy fade in, if user supplied a fade amount if (settings.fade > 0) { jQuery(obj).fadeIn(settings.fade); } } /* set up any user passed variables ***************************************/ if (options) { jQuery.extend(settings, options); } /* main ***************************************/ return this.each(function () { sys.elem = this; // if they don't provide a destObject, use parent if (settings.destElem === null) { settings.destElem = jQuery(sys.elem).parent(); } // need to make sure the user set the parent's position. Things go bonker's if not set. // valid values: absolute|relative|fixed if (jQuery(settings.destElem).css("position") === "static") { jQuery(settings.destElem).css({ "position": "relative" }); } // if our object to scale is an image, we need to make sure it's loaded before we continue. if (typeof sys.elem === "object" && typeof settings.destElem === "object" && typeof settings.method === "string") { // if the user supplied a fade amount, hide our image if (settings.fade > 0) { jQuery(sys.elem).hide(); } if (sys.elem.nodeName === "IMG") { // to fix the weird width/height caching issue we set the image dimensions to be auto; jQuery(sys.elem).width("auto"); jQuery(sys.elem).height("auto"); // wait until the image is loaded before scaling jQuery(sys.elem).imagesLoaded(function () { scaleObj(this); }); } else { scaleObj(jQuery(sys.elem)); } } else { console.debug("CJ Object Scaler could not initialize."); return; } }); }; })(jQuery);

    Read the article

  • HTML5 video capture and streaming?

    - by Shyatic
    I'm working on kind of an educational site, where there are teachers and students around the world (potentially). Since it's a non-profit site, and I don't have the need for it to be done tomorrow (kind of a side project of something bigger), I wanted to know the best way to figure out how to do this. I'm not a programmer by trade, I've been on the systems side of things for years, but I understand most technology and the question here is more how to gauge what to do so I can get the right resources in place. That said... here's what I am looking at. I figure the future is HTML5, and that's probably where I'd rather spend my efforts given that it will be cross platform and without the need for plugins. It will work on mobile as well. Question is, how well does HTML5 handle input media, say desktop capture and camera, or on mobile perhaps, where I'd want to use the user's phone camera, etc. Second question is dynamic streaming... I've read about MPEG DASH, then there are technologies like Smooth Streaming (which I think given the way Silverlight is going is going to be gone or useless), then also Apple and Flash, but if I'm doing HTML5 it doesn't benefit me. Any ideas here would be really helpful, and the more detail the better! :) That's about it... there are free chat services out there like using the MSN Web Chat controls (how good they are, I don't know, but worldwide most people have a Hotmail/MSN account) so I can use that for chat. I don't know its limitations of course, but that's something if people know or have suggestions, then I'm all ears. Thanks for the help, I greatly appreciate it!

    Read the article

  • Move Files from a Failing PC with an Ubuntu Live CD

    - by Trevor Bekolay
    You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

    Read the article

  • How to create a bootable system with a squashfs root

    - by cldfzn
    My goal is to be able to take a customized root file system loaded with the software I want. So far I've created a squashed filesystem using debootstrap and chroot to install the software I want on the system. The problem I am now running in to.. whenever I boot in to the system, my user accounts that were set up in the chroot do not work. First boot everything works out, second boot I can't log in. That is baffling to me. Any one know a reason or a place to start looking? Update To get a working system with a squashfs filesystem: sudo apt-get install live-boot live-boot-initramfs-tools extlinux sudo update-initramfs -u Create a squashfs file from a bootstrapped or running ubuntu filesystem with whatever packages you want available. https://help.ubuntu.com/community/LiveCDCustomizationFromScratch provides good instructions for creating a debootstrapped system to build on. Format the target drive with ext2/3/4 and enable the bootable flag. Create the folder layout on the target drive and install extlinux: mkdir -p ${TARGET}/boot/extlinux ${TARGET}/live extlinux -i ${TARGET}/boot/extlinux dd if=/usr/lib/syslinux/mbr.bin of=/dev/sdX #X is the drive letter cp /boot/vmlinuz-$(uname -r) ${TARGET}/boot/vmlinuz cp /boot/initrd.img-$(uname -r) ${TARGET}/boot/initrd cp filesystem.squashfs ${TARGET}/live Create ${TARGET}/boot/extlinux/extlinux.conf with the following contents: DEFAULT Live LABEL Live KERNEL /boot/vmlinuz APPEND initrd=/boot/initrd boot=live toram=filesystem.squashfs TIMEOUT 10 PROMPT 0 Now you should be able to boot from the target drive in to your squashed system.

    Read the article

  • Is there a way to test HTTP Live Streaming via an iSight camera?

    - by bpapa
    I'm working on an iPhone app that will use HTTP Live Streaming. Using Apple's provided tools (particularly mediafilesegmenter), I'm able to successfully segment and serve an archived video. Now I want to test Live Streaming stuff. I don't own any sort of camcorder, I just have my iSight built-in to my Mac. Is there a way to leverage this camera to test out Live Streaming? Run iSight from the command line maybe? If so, I need a port number for mediastreamsegmenter.

    Read the article

  • How to impose control access on flash player streaming through RTMP?

    - by MobiHunterz
    Hi, I'm using ICECAST and I'm streaming AAC/HE-AACv2 audio/video file through flash player and on iPhone. Both are separate. But when I submit url in WINAMP to stream it's requesting username/password. But when I use it with flash player, it just starts streaming. My case is I want to use same streaming (RTMP) for both website and iPhone app and i want to impose control access over my flash player to authenticate who can see streamed video. So, I need to allow access to authenticated users only to see flash player or just reject playing. Now, my provider is not supporting control access on flash player, but i need to do it... can u say how i can do this? Any kind of help will be appreciated. Thanks.

    Read the article

  • Diagnose PC Hardware Problems with an Ubuntu Live CD

    - by Trevor Bekolay
    So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

    Read the article

  • How to Browse Without a Trace with an Ubuntu Live CD

    - by Trevor Bekolay
    No matter how diligently you clear your cache and erase your history, web browsing leaves traces on your computer. If you need keep your browsing private, then an Ubuntu Live CD is the answer. The key to this trick is that the Live CD environment runs completely in RAM, so things like your cache, cookies, and history don’t get saved to a persistent storage location. On a hard drive, even deleted files can be recovered, but once a computer is turned off the data stored in RAM is unrecoverable. In addition, since the Ubuntu Live CD environment is the same no matter what computer you use it on, there’s very little identifying information that a website can use to track you! The first step is to either burn an Ubuntu Live CD, or prepare a non-persistent Ubuntu USB flash drive. Ubuntu treats non-persistent flash drives like CDs, so files will not be written to it, but if you’re paranoid, then using a physical CD ensures that nothing gets written to a storage device. Boot up from the CD or flash drive, and choose to Run Ubuntu from the CD or flash drive if prompted (for more detailed instructions on booting from a CD or USB drive, see this article, or our guide on booting from a flash drive even if your BIOS won’t let you). Once the graphical Ubuntu environment comes up, you can click on the Firefox icon at the top of the screen to start browsing. If your browsing requires Flash, then you can install it by clicking on System at the top-left of the screen, then Administration > Synaptic Package Manager. Click on Settings at the top of the Synaptic window, and then select Repositories. Add a check in the checkbox with the label ending in “multiverse”. Click Close. Click the Reload button in the main Synaptic window. The list of available packages will reload. When they’ve reloaded, type “restricted” in the Quick search box. Right-click on ubuntu-restricted-extras and select Mark for Installation. It will note a number of other packages that will be installed. This list includes audio and video codecs, so after installing these, you should be able to play downloaded movies and songs. Click Mark to accept the installation of these other packages. Once you return to the main Synaptic window, click the Apply button and go through the dialogs to finish the installation of Flash and the other useful packages. If you open up Firefox now, you’ll have no problems using websites that use Flash. When you’re done browsing and shut down or restart your computer, all traces of your web browsing will be gone. It’s a bit of work compared to just using a privacy-centric browser, but if it’s very important that your browsing leave no traces on your hard drive, an Ubuntu Live CD is your best bet. Download Ubuntu Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDAdding extra Repositories on UbuntuHow to Add a Program to the Ubuntu Startup List (After Login)How to install Spotify in Ubuntu 9.10 using WineInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • Clone a Hard Drive Using an Ubuntu Live CD

    - by Trevor Bekolay
    Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

    Read the article

  • Using Live Data in Database Development Work

    - by Phil Factor
    Guest Editorial for Simple-Talk Newsletter... in which Phil Factor reacts with some exasperation when coming across a report that a majority of companies were still using financial and personal data for both developing and testing database applications. If you routinely test your development work using real production data that contains personal or financial information, you are probably being irresponsible, and at worst, risking a heavy financial penalty for your company. Surprisingly, over 80% of financial companies still do this. Plenty of data breaches and fraud have happened from the use of real data for testing, and a data breach is a nightmare for any organisation that suffers one. The cost of each data breach averages out at around $7.2 million in the US in notification, escalation, credit monitoring, fines, litigation, legal costs, and lost business due to customer churn, £1.9 million in the UK. 70% of data breaches are done from within the organisation. Real data can be exploited in a number of ways for malicious or criminal purposes. It isn't just the obvious use of items such as name and address, date of birth, social security number, and credit card and bank account numbers: Data can be exploited in many subtle ways, so there are excellent reasons to ensure that a high priority is given to the detection and prevention of any data breaches. You'll never successfully guess all the ways that real data can be exploited maliciously, or the ease with which it can be accessed. It would be silly to argue that developers never need access to a copy of the database containing live data. Developers sometimes need to track a bug that can only be replicated on the data from the live database. However, it has to be done in a very restrictive harness. The law makes no distinction between development and production databases when a data breach occurs, so the data has to be held with all appropriate security measures in place. In Europe, the use of personal data for testing requires the explicit consent of the people whose data is being held. There are federal standards such as GLBA, PCI DSS and HIPAA, and most US States have privacy legislation. The task of ensuring compliance and tight security in such circumstances is an expensive and time-consuming overhead. The developer is likely to suffer investigation if a data breach occurs, even if the company manages to stay in business. Ironically, the use of copies of live data isn't usually the most effective way to develop or test your data. Data is usually time-specific and isn't usually current by the time it is used for testing, Existing data doesn't help much for new functionality, and every time the data is refreshed from production, any test data is likely to be overwritten. Also, it is not always going to test all the 'edge' conditions that are likely to flush out bugs. You still have the task of simulating the dynamics of actual usage of the database, and here you have no alternative to creating 'spoofed' data. Because of the complexities of relational data, It used to be that there was no realistic alternative to developing and testing with live data. However, this is no longer the case. Real data can be obfuscated, or it can be created entirely from scratch. The latter process used to be impractical, now that there are plenty of third-party tools to choose from. The process of obfuscation isn't risk free. The process must access the live data, and the success of the obfuscation process has to be carefully monitored. Database data security isn't an exciting topic to you or I, but to a hacker it can be an all-consuming obsession, especially if there is financial or political gain involved. This is not the sort of adversary one would wish for and it is far better to accept, and work with, security restrictions that exist for using live data in database development work, especially when the tools exist to create large realistic database test data that can be better for several aspects of testing.

    Read the article

  • 12.10 unable to install or even run from Live CD with nVidia GTX 580

    - by user99056
    I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >