Search Results

Search found 706 results on 29 pages for 'loose'.

Page 19/29 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Server 2003 PDC DNS not working..Failover server is...

  - by Seth

  In the midst of trying to utilize proc power, i create a fault tolerant DNS server a while ago. Since, Ive been trying to add another controller for exchange. So I thought I would revert back to a single primary DNS for the meantime and now Im balancing on a thread. The server i thought I uninstalled DNS, is still acting as DNS. And now the PDC does not resolve. Can anybody walk me through, Im overwhelmed and cant think straight... Im afraid if anyone restarts their machine they wont have internet. Update Ok so from the beginning. I was configuring Exchange on a new server 2008. How it happened I dont know, but it started to not resolve DNS. (exclamation mark on NIC) even though everything was static. So ultimately I decided to remove the server from the problem, because I noticed DNS was in disarray if I used the DNS IP of the first server. This is when I tested with nslookup on each DNS server. I had uninstalled DNS from the second server, but nslookup was still resolving with that IPaddress, which has me all wound up cause I dont understand. So, since the first DNS server isn't resolving, Im assuming if the second one isnt configured right I'll loose internet. Im just confused and dont know where to start troubleshooting...

  Read the article

• Laptop shuts down randomly without warning

  - by Robert P.

  My Asus Zenbook UX32V turns off randomly when I'm working on it. This happens both when the computer is recently turned on (5 minutes), and after being on for several days. I'm not running any heavy software The laptop is not heating The fan is not working on the maximum capacity (it's not heating) It happens when the laptop is lying still on the table It is no warning, it simply goes black It happens both when charging and on battery My guess is that it suddenly lose power somehow. What puzzles me is that I can flip the laptop upside down, sideways, shake it, etc. without it shutting off. This makes me think it's not something that's loose causing occasional short-circuits. I realize that the laptop probably doesn't like flipping and shaking, but it was the best way I could troubleshoot. I rarely turn the computer off, only have it in hibernate or sleep mode (most often hibernate). I've never experienced that the laptop is off when I wake it up from sleep mode. I've had the problem for a few months and it happens 2-8 times a week. Specs: Asus Zenbook UX32V Windows 8.1 (it happened in Windows 8.0 too) Intel i5-3317U CPU @ 1.70GHz The laptop is approx 1.5 years, but it has a small dent on one of the sides that probably voids the warranty. The dent has been there since week one and I don't think it's related to the problems I'm having now. Does anyone have a clue what might cause this, and how it might be fixed? I've read all other questions (some of which are listed below) that seem related to my issue, but none report the same behavior as I'm experiencing. Most report heavy games, heating etc. Asus N53J Laptop randomly shuts down Laptop is randomly shutting off Computer shuts down without warning My laptop acer aspire 5720 suddenly turn off randomly Computer randomly shutting down Windows 8.1 randomly shuts self down ASUS K55VM Laptop unexpectedly shuts down

  Read the article

• Regarding AD Domain controllers and remote branch offices

  - by Alex

  We have central HQ building and a lot of small branch offices connecting via VPN and want to implement AD (If you can believe we still haven't). We want everyone to log in using domain accounts and be policed centrally. We are OK with having a RODC in a branch office with like 10 computers. But we have these small branches with two to four PCs only. Some of these branches connect to HQ via IPSec site-to-site VPN, some via remote access (client-based) VPN. So there is no problem with ones that have local RODC or connecting to HQ DCs via VPN router. But how about small branches? We don't really want to set up a machine there, neither we want to invest into Windows Server licenses or fancy network equipment. Also, the problem is that we cannot access HQ DCs via VPN because we are not logged in and connected to HQ internal network yet, so DCs aren't reachable. What is typically done in that situation if it is needed to have central management over policies on those PCs? Or is it better to let 'em loose and use local policies and accounts in this situation?

  Read the article

• How to scan multiple pages from a book under Linux?

  - by rumtscho

  I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

  Read the article

• Assembly Level Language? Unlock iPhone 3GS with latest Baseband. Need Opinion

  - by getkenny

  Hi Guys, So its more like advice i need. I got 2 iPhone 3GS (Bootloader 06.02 and BB 05.11) which are lying around useless cause it was bought it from US and now i am in Dubai. Cannot use the phone because there is no unlock. Now rather than waiting and relying on other people to provide a unlock for the baseband , i was thinking of learning what it takes to unlock a iPhone. I currently don't even know what i got to learn to do this. I understand from soem reading around that i will need to learn ARM to understand the baseband and try to find a exploit: is it correct? I really want to help people out in getting their iPhones working. Also the iPhones cost was $645 each (16GB) so its not like Apple is going to loose any money of it, the person who bought it for me thought that if your not buying with an AT&T contract it means that it is unlocked but it is not true. I need help, i am willing to learn and you guys are the best bunch around to give me advice. Regards.

  Read the article

• Ubuntu odd mouse and keyboard behavior when window gains inner focus

  - by Scott

  This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

  Read the article

• PHP on several servers with session-sharing

  - by Etu

  there's certanly other threads about this, but I have one more question. We are about to scale the website at work to have more than one server. And we need to share the sessions between the servers. We have been looking into different solutions, one in memcached and use Memcached as sessionhandler in PHP. That will probably work. And the idea would be to run memcached on every machine and let all webservers access all other servers memcached servers, and then we have shared sessions between the machines, yay. (we have no resources to setup with sticky-sessions yet, that's a later project. we need this running, and we need this running now. and we will loadbalance with DNS for a starter) But then... If I want to take one server down, say, for maintenance, or a server crashes, or whatever reason. I don't want the users to just loose their sessions and have to start from the beginning... That's why we need some kind of replication, which Memcached does not support. Then I found http://repcached.lab.klab.org/ -- which has multi-master replication of memcached, which is great, and is what I want. But does it work with 2 machines? Say 3, 5, 10? For future scaling. I also looked into redishttp://redis.io/ -- which also seems great, but is a bit more "shaky" with the php-session-handler support, and no multi-master-replication. The thing is that I like to use memcached, but I want to be able to power down one of two boxes without loosing half of the sessions. Any suggestions?

  Read the article

• USB Device Not Recognized (Mac)

  - by Nargis

  Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

  Read the article

• RESOLVED Why does IPtables's NAT stop working when I enable the firewall's third interface?

  - by Kronick

  On my firewall I've three interfaces : eth0 : public IP (46.X.X.X.) eth0:0 public IP (46.X.X.Y.) eth1 : public IP (88.X.X.X.) eth2 : private LAN (172.X.X.X) I've setup a basic NAT which works great until I turn on the eth1 interface, I basically loose the connectivity. When I turn off the interface (ifconfig eth1 down) then the NAT re-work. I've added some policy routing via iproute, which makes my three public IP's available. I don't understand why turning on eth1 on makes the LAN unavailable. PS : weirder ; when I turn on eth1 BUT remove the NAT, then the firewall is accessible by using the public IPS. So to me it's exclusively a NAT issue, since without the NAT the network works while with the NAT without the second public interface, the NAT does work. Regards EDIT : I've been able to make it work by using iproute2 rules. That was definitely a routing issue. Here is what I did : ip rule add prio 50 table main ip rule add prio 201 from ip1/netmask table 201 ip rule add prio 202 from ip2/netmask table 202 ip route add default via gateway1 dev interface1 src ip1 proto static table 201 ip route append prohibit default table 201 metric 1 proto static ip route add default via gateway2 dev interface2 src ip2 proto static table 202 ip route append prohibit default table 202 metric 1 proto static # mutipath ip rule add prio 221 table 221 ip route add default table 221 proto static \ nexthop via gateway1 dev interface1 weight 2\ nexthop via gateway2 dev interface2 weight 3

  Read the article

• Computer wont start, just blinks on and off

  - by Ryan

  This is really strange. I had a comp that was working fine for over a year, then suddenly it started to shut off, it got so bad that I press the power button and in around 30 secs while booting windows it would shut off, then 20 secs... then 10 secs, then it refused to start all together. So I bought a new PSU (850w Thermaltake, the old one was 550w corsair) thinking that was the problem, I fitted the new PSU now and its the same thing, I press the power button and my fans start for a split second (they have led lights on them, so the lights come on) and then everything goes off again. I thought maybe it was my power button that was loose on my comp, luckily I had another chassis near by so I disconnected the powerSW from the old one and put ran the powerSW from the new chassis, press the power on the new chassis and same thing, it blinks for a split second and off again. Double checked connections from the PSU to the cpu power as well as board mobo power, its tight. It's pretty unlikely both the PSUs have the same exact problem so am lost... Suggestions?

  Read the article

• Windows won't boot after moving house. How do I solve this?

  - by James

  Ive just moved house and tried to set up my desktop after packing it away and now when I power it on, the BIOS boots up and no errors are found but when my computer tires to boot into Windows 7 a continuous fast beeping sound is made and a black screen is displayed. What I've done so far: Reset to UEFI defauts Played about with RAM, I had 4*4 GB sticks, I took all of them out to test for a mobo error which I have and now im only using 1 stick of 4 GB. Changed my GPU, I tok my gtx580 out and now im using the onboard Intel 3000 graphics driver, the BIOS and uefi are correctly displaying so I no longer think its a GPU based error. Ive check all of the connections and nothing seems to be loose. My HDD setup is: 2 128 GB SSD's in Raid 0 as my main C drive (possibly cause of error?) 1 1 TB Games drive 1 2 TB Data Drive Ive also got a blueray drive connected. After searching the internet im pretty much out of suggestions but im currently downloading a live CD to see if it will boot and if I can access some files on my HDD.

  Read the article

• Removing Phantom Registry Entries

  - by shedd

  First, some background: I'm trying to install an HP OfficeJet 6500. I've got the printer setup on my network fine, but the driver software installation on Windows XP (SP3) is a PITA. The installation program keeps dying with the following error: Product: Network -- Error 1324. The folder path 'WD Sync Data' contains an invalid character. WD Sync Data is a program on external Western Digital harddrives, which I used to use on this computer, but no external drive is current mounted. I've searched my registry for those keywords, but haven't found anything. I also ran CCleaner on the registry just to make sure, but no loose ends detected there, either. There are a number of Google results for the error, but no solutions. One post pointed me to the Windows Installer Cleanup Utility, but this utility doesn't even run - it dies with the same error before even starting. Any thoughts on where I could look to clean up this invalid character so I can get the HP installation wizard to successfully run? Many thanks in advance!

  Read the article

• FDE / SSD - partition and leave some unencrypted?

  - by Web Design Hero

  Just bought a used beast of a desktop pc. The system drive is setup as a Raid 0 SSD (Intel 510 SSD Drives) with 128 each. I will probably not have to many programs beyond office and maybe Adobe CS if I spring for it, I will be keeping big data on a regular hdd. My question is about setting up TrueCrypt with my configuration. I have not previously done full disk encryption, but I feel that its probably a good idea. I have done some speed tests using file containers on the hdd and the sdd with truecrypt. While there is a huge hit with the SSDs and Truecrypt, it still outperforms the hdd on its own by a good margin, so I think i will be okay for my needs with truecrypt. I have seen in a few places that they recommend partitioning the drive and leavign some of the SSD not inside truecrypt, does this really make a difference? If so, how much should I leave? Will there be any issue in the Raid0 configuration? I am not really concerned about all the wear leveling issue, rather loose data and be secure, but since I don't need all that space neccesarily, I would like to optimize my setup for security and speed.

  Read the article

• jqtouch / google maps api v3 issue

  - by Rigo Vides

  Hi everyone, I'm having a hard time triying to make jQtouch and Google Maps api V3 together. I've tried almost everything. It seems that the only source of information is here I checked every single post. I'm starting with jQuery and css... so there's a lot of stuff I don't understand. First of all, I'm using jQtouch framework to build a web app with google maps integration, the problem is that whenever I pan the map, strange flickering occurs. It's like jQtouch and the map are trying to fight for a callback. I'm using the latest revision out there. And have several bugs, regarding transition/animation functionality (since I don't wrap the map and all the element's divs within the #jqt wrapper) and css issues with some styling. Anyone has successfully achieve a functional setup build for this scenario? (google maps api v3 & jqtouch), I think is not necessary to paste you some code (But if you think is necessary please let me know and I'll do it), If you paste me a minimal example with a map (detailing jqtouch version, and modification to the styles/.js files), and some transition back and forth from the map to another div/section/page, you'll get the bounty. Thanks a lot in advance. And please, let me know if this is kind of 'legal' here, I mean, there's too loose information on the official wiki, and like 13 'solutions' but nothing concrete... I'm just triying to help anyone who step on in this problem in the future.

  Read the article

• Using jquery validate with multiple fields of the same name

  - by Matt H

  I am trying to get jquery validate to work on multiple fields. Reason being I have dynamically generated fields added and they are simply a list of numbers. So I thought I'd put together a basic example and followed the concept from the accepted answer in the following link: http://stackoverflow.com/questions/931687/using-jquery-validate-plugin-to-validate-multiple-form-fields-with-identical-name However, it's not doing anything useful. Why is it not working? <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <script src="http://code.jquery.com/jquery-latest.js"></script> <script type="text/javascript" src="http://dev.jquery.com/view/trunk/plugins/validate/lib/jquery.delegate.js"></script> <script type="text/javascript" src="http://dev.jquery.com/view/trunk/plugins/validate/jquery.validate.js"></script> <script> $("#submit").click(function(){ $("field").each(function(){ $(this).rules("add", { required: true, email: true, messages: { required: "Specify a valid email" } }); }) }); $(document).ready(function(){ $("#myform").validate(); }); </script> </head> <body> <form id="myform"> <label for="field">Required, email: </label> <input class="left" id="field" name="field" /> <input class="left" id="field" name="field" /> <input class="left" id="field" name="field" /> <input class="left" id="field" name="field" /> <br/> <input type="submit" value="Validate!" id="submit" name="submit" /> </form> </body> </html>

  Read the article

• "Admin module" taking over [Yii framework]

  - by Flavius

  Hi I have an "admin" module and I want it to serve "dynamic controllers", i.e. to provide a default behaviour for controllers which don't really exist ("virtual controllers"). I've invented a lightweight messaging mechanism for loose communication between modules. I'd like to use it such that when e.g. ?r=admin/users/index is requested, it will call the "virtual controller" "UserController" of AdminModule, which would, by default, use this messaging mechanism to notify the real module "UsersModule" it can answer to the request. I thought about simulating this behaviour in AdminModule::init(), but at that point I have no way of deciding whether the action can be processed by a real controller or not, or at least I don't know how to do it. This is because of the way Yii works: bottom-up, the controller is the one that renders the view AND the application layout (or the module's, if it exists), for example. I don't think the module even has a word to say about handling a given controller+action or not. To recap, I'm looking for a kind of CWebModule::missingController($controllerId,$actionId), just like CController::missingAction($actionId), or a workaround to simulate that. That would possibly be in CWebModule::init() or somewhere where I can find out whether the controller actually exists, in which case it's his job to handle it the $actionID and $controllerID whether the module $controllerID exists (I didn't type it wrong, in r=admin/users/index, "users" is the actual module, as specified in the application's config).

  Read the article

• Recover files from corrupt filesystem

  - by Emile 81

  My situation: I have an older 80GB IDE internal hdd, with a few files on that I would like very much to recover: some word documents some latex documents (text files) and pictures (png, jpg, eps files) some other text documents and visual studio project files I had backed them (not the latex ones though) up using svn, but have not committed lately, and would loose a lot of work if I cant recover. the hdd seems to have lost its filesystem, i have no idea how it came about. I know it has/had 3 NTFS partitions, i know the files i want are on the second or third partition. I read http://superuser.com/questions/81877/recover-hard-disk-data Partition Find and Mount did not see all the partitions using intelligent scan TestDisk does (i think), I followed the step by step instructions here, but when I try to list the files it says: "Can't open filesystem, filesystem seems damaged." I'm not sure how to proceed here, as TestDisks wiki does not contain this error message afaik. I don't know if the hdd is gonna fail, or some prog has caused the filesystem to be corrupt, the hdd doesnt make a sound, so i guess that's good. I would like some guidance so I don't accidentally cause more damage. (eg. is it ok to let testdisk write the filesystem to disk? I'm pretty the partitions are listed ok, but not 100%)

  Read the article

• Google App Engine application instance recycling and response times...

  - by Konrad

  Hi, I posted this on GAE for Java group, but I hope to get some answers here quicker :) I decided to do some long-run performance tests on my application. I created some small client hitting app every 5-30 minutes and I run 3-5 of threads with such client. I noticed huge differenced in response times and started to investigate issue. I found reason very quick. I am experiencing same issues as described in following topics: Uneven response time between connection to server to first byte sent Application instances seem to be too aggressively recycled Getting 'Request was aborted after waiting too long to attempt to service your request.' after application idle I am using Springframework, it tkes around 18-20s to start app instance, which is causing response times to take from 1s (when requests hits running app - very rare) to 22s when fresh application is created. Is there any solution for this? I was thinking about creating most basic servlet performing critical tasks (serving API call) and leave UI as is. But then I would loose all benefits of Springframework. Is there any solution for this? After solving (hacking) numerous constrains of App Engine which I hit while developing my app that is the one I think will make me move out of App Engine... that's simply to much to all the time think how to win with GAE problems than how to solve my application problems... Any help? Regards Konrad

  Read the article

• How to use OSGi getServiceReference() right

  - by Jens

  Hello, I am new to OSGi and came across several examples about OSGi services. For example: import org.osgi.framework.*; import org.osgi.service.log.*; public class MyActivator implements BundleActivator { public void start(BundleContext context) throws Exception { ServiceReference logRef = context.getServiceReference(LogService.class.getName()); } } My question is, why do you use getServiceReference(LogService.class.getName()) instead of getServiceReference("LogService") If you use LogService.class.getName() you have to import the Interface. This also means that you have to import the package org.osgi.services.log in your MANIFEST.MF. Isn't that completely counterproductive if you want to reduce dependencies to push loose coupling? As far as I know one advantage of services is that the service consumer doesn't have to know the service publisher. But if you have to import one specific Interface you clearly have to know who's providing it. By only using a string like "LogService" you would not have to know that the Interface is provided by org.osgi.services.log.LogService. What am I missing here?

  Read the article

• Post Loading ads - using appendChild to move an IFRAME with text link ads

  - by Prem

  I have changed code around to basically load an add the bottom of the page in a hidden div and attached an onload event handler that called document.getElementById(xxx).appendChild() to take the hidden ad and move it into the right spot in my page. This works GREAT.. however when the ad is a text ad it AFTER i move the ad there is nothing in the rendered Iframe. I did tests to see what it looks like before i move it and sure enough the text links load in the IFRAME but the second i do the appendChild call to move the div that contains the ad i seem to loose the contents of the Iframe. Any ideas whats going on <div id="myad" style="display: none;"> GA_googleFillSlot("MyADSlotName"); </div> <script> window.onload = function() { // leader board document.getElementById('adplaceholder').appendChild(document.getElementById('myAd')); document.getElementById('myAd').style.display = ''; </script> UPDATE: I think what the problem here is that on text ads google writes to the iframe directly inserting the relevant text links where are on other ads it uses the iframe to just point to some src. seems like when i do the appendchild, if there is no "src" set for the iframe after the copy is done the iframe in the new location contains nothing... guess it does a reload on the src? Any way around this??

  Read the article

• Django forms, inheritance and order of form fields

  - by Hannson

  I'm using Django forms in my website and would like to control the order of the fields. Here's how I define my forms: class edit_form(forms.Form): summary = forms.CharField() description = forms.CharField(widget=forms.TextArea) class create_form(edit_form): name = forms.CharField() The name is immutable and should only be listed when the entity is created. I use inheritance to add consistency and DRY principles. What happens which is not erroneous, in fact totally expected, is that the name field is listed last in the view/html but I'd like the name field to be on top of summary and description. I do realize that I could easily fix it by copying summary and description into create_form and loose the inheritance but I'd like to know if this is possible. Why? Imagine you've got 100 fields in edit_form and have to add 10 fields on the top in create_form - copying and maintaining the two forms wouldn't look so sexy then. (This is not my case, I'm just making up an example) So, how can I override this behavior? Edit: Apparently there's no proper way to do this without going through nasty hacks (fiddling with .field attribute). The .field attribute is a SortedDict (one of Django's internal datastructures) which doesn't provide any way to reorder key:value pairs. It does how-ever provide a way to insert items at a given index but that would move the items from the class members and into the constructor. This method would work, but make the code less readable. The only other way I see fit is to modify the framework itself which is less-than-optimal in most situations. In short the code would become something like this: class edit_form(forms.Form): summary = forms.CharField() description = forms.CharField(widget=forms.TextArea) class create_form(edit_form): def __init__(self,*args,**kwargs): forms.Form.__init__(self,*args,**kwargs) self.fields.insert(0,'name',forms.CharField()) That shut me up :)

  Read the article

• Language Tricks to Shorten My Java Code?

  - by yar

  I am currently rediscovering Java (working with Ruby a lot recently), and I love the compilation-time checking of everything. It makes refactoring so easy. However, I miss playing fast-and-loose with types to do an each loop. This is my worst code. Is this as short as it can be? I have a collection called looperTracks, which has instances that implement Looper. I don't want to modify that collection, but I want to iterate through its members PLUS the this (which also implements Looper). List<Looper> allLoopers = new ArrayList<Looper>(looperTracks.length + 1); for (LooperTrack track : looperTracks) { allLoopers.add(track); } allLoopers.add(this); for (Looper looper : allLoopers) { // Finally! I have a looper I'm particularly concerned about any features that are new to Java from 1.5 on that I may have missed. For this question I am not asking about JRuby nor Groovy, though I know that they would work for this. Edit: Sorry (too much Ruby!)... looperTracks is of type LooperTrack[] and LooperTrack implements Looper.

  Read the article

• div insert in div

  - by lolalola

  Hi, what's wrong with this code? Now disappear background and div after this code show incorrect. But why when i delete "float: left", everything looks good. <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <style type="text/css"> #first{ width: 200px; background-color: #345752; } #left_b{ background:transparent url('img/left.png'); background-position: left top; background-repeat: repeat-y; min-height: 30px; } #right_b{ background:transparent url('img/right.png'); background-position: right top; background-repeat: repeat-y; } #text{ float: left; width: 50px; height: 30px; } #text2{ float: left; width: 70px; height: 30px; } </style> </head> <body> <div id = "first"> <div id = "left_b"> <div id = "right_b"> <div id = "text"> text 1 </div> <div id = "text2"> text 2 </div> </div> </div> </div> </body> </html>

  Read the article

• Excel Range Format: Number is automatically formatted when Range::Value2 is set

  - by A9S6

  I have an Excel addin written in C# that imports a text file into Excel worksheet. Some of the fields in the file are text and some oare numbers. Problem Steps: Change the System's Regional Settings to Dutch (Belgium) Open Excel and import the file into Excel. Records contain values such as 78,1118 which gets converted to 781.118. Note that in Dutch(Belgium), COMMA is the decimal character and DOT is the thousand character. I do not require the number to be formatted automatically but just want to display whatver I get from the file (78,1118). If I set the cell's NumberFormat to "@" i.e. Text, then it displays an error (SmartTag) saying "Number stored as Text". I know I can change the settings by going to the "Options" box but I dont want to change any user options in Excel for this. I have tried setting the cell's Value2 with an "'" (apostrophe) but the same error is displayed. If I set the cell's format to something else after the value is set then the actual value changes and I loose the decimal. Is there a way in Excel to just display the value and NOT display the "Number Stored as Text" error in cell?

  Read the article

• JAX-WS and JPA, how to load stub objects using JPA?

  - by opensas

  I'm trying to develope a soap web service that has to access a mysql db. I have to replicate an existing service, so I created all the stub object from it's wsdl file Netbeans created all the necessary stuff for me (new, web service from wsdl), it works ok... Now I'm trying to use JPA to load all those objects from the database. So far I was going fine, I created the classes using (new, entity class from database), and then copied all the annotations to the classes generated by wsimport, and it was working fine. The problem is that netbeans insists on running wsimport again, and then I loose all my annotations... Is there some way to tell netbeans not to regenerate those files? I think this situation shoulb be pretty common, I mean developing a web service from a wsdl and then having to fill those objects with data using JPA. what would be the correct aproach to this kind of situation? thanks a lot saludos sas I've also tried inheriting from the stubs, and addign there the persistence annotations, but I had troubles with overlaping members, I'm redeclaring protected properties...

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >