Search Results

Search found 50898 results on 2036 pages for 'microsoft access 2003'.

Page 19/2036 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• website not accessible with IIS6 while NAT is configured in Windows 2003

  - by Mohammed Rizwan

  I have Windows2003 server configured with IIS 6. Until now it was working fine, but since I enabled NAT for my users to access the internet via this server, the website becomes unavailable. Note that I have two nics on the server one is WAN and 2nd is for LAN. Both IPs are behind the firewall. If I stop the NAT then the website is available externally. I tried to search the answer in this forum but didn't find appropriate one or maybe didn't properly understand. I'll appreciate if anyone can help me sorting out this issue.

  Read the article

• Sharing a printer over the net from Windows 7 to Windows Server 2003

  - by Grant Unwin

  Hi, I need to share a printer that is connected to a Windows 7 computer. The windows 7 computer is in another building about an hours drive away. The computer that needs to access the printer is running Windows Server 2008. Ive tried setting the printer as 'shared' for 'everyone' on the Windows 7 PC and accessing it from the server by adding a TCP/IP port to the IP address but the printer just wont add. From googling aparently it may need setting up as a printer server through IIS, but i'm just not sure on the best practice. Any help greatly appreciated. Thanks Grant Unwin

  Read the article

• Cross-forest GPO between 2003 and 2008 Denied Beacuse it's "Inaccessible"

  - by j.rightly

  I have a two-way, non-transitive trust between two forests and domains, "W2003" and "W2008". In W2008 I have a GPO with user settings linked to a machine OU containing machine "Server". The GPO applies to Authenticated Users. Cross-forest loopback processing is enabled in merge mode. When I log onto Server as User (whose account exists in the W2003 domain), the GPO does not apply. I run RSoP and see that the GPO is "Denied" for the reason "Inaccessible." The GPO name is not listed, but the GUID is. I have checked the file-level permissions on the DC to ensure that User has access to read the GPO's folder and all its contents. What is going on?

  Read the article

• Windows Server 2003 Terminal Services error

  - by Adrian S

  Hi! I have a Win2K3 machine which I want to access via remote desktop. When I try remote desktop on another machine the session just ends as soon as it attempts connection. I never see the log-on sceeen or anything. It just returns to the remote desktop connection dialog. I have checked the service on the target machine and it's up and running, so how can I determine the error? Is there any way to re-install terminal services and see if it just fixed?

  Read the article

• Switching over an email address from a distribution group to a user account in Exchange 2003

  - by Sevdarkseed

  I'm currently in a transition mode. We currently have a Distribution Group called Quotes and Orders that send out emails to several users. I'm told that a better method would be to create a user and then give access to that fictitious user's email account so that everyone would be able to see everything that goes out and is responded to in a single account. However, I'm not sure what the best method would be for creating an account and shutting down the distribution group. I'm thinking more along the lines of the steps that considered best practice to remove the email account from the distribution group and attach it to the user account. Any thoughts?

  Read the article

• Window 2003 Server - Logon Failure error message in Event Viewer

  - by user45192

  Hi guys, I received alot of event logged in the event viewer with this message. I notice is always the same user id which encounters this error. The user id is use by an application to access the database. However, this account does not exits on this server. How do I trace the services/program use by this user id which causes these error messages? Reason=Unknown user name or bad password&&User Name=&&Domain=&&Logon Type=3&&Logon Process=NtLmSsp&&Authentication Package=NTLM&&Workstation Name=&&Caller User Name=-&&Caller Domain=-&&Caller Logon ID=-&&Caller Process ID=-&&Transited Services=-&&Source Network Address=-&&Source Port=-&&User=SYSTEM&&ComputerName=

  Read the article

• Windows Server 2003: Remapping external domain

  - by Chuck Harmston

  We're playing a going-away prank on a coworker, and would like to use a rule in our internal DNS server to redirect techcrunch.com to point at one of our internal development servers. Basically, I'd like to accomplish the same thing as adding a line to a Linux /etc/hosts file, only for the entire network. I have access to our DNS server. How would you go about doing this? I created an entry in the reverse lookup subnet with the 'Host Name' of techcrunch.com and the 'Host IP' of our development server, a Linux box running Debian on which I've created a virtualhost to handle requests to techcrunch.com. It doesn't appear to be working, however, and my expertise has reached its limit. Thanks!

  Read the article

• Exchange 2003 Internet Mail Size Limits

  - by scampbell

  I have unsuccessfully tried to increase per user incoming mail size settings by editing their user account settings on our Exchange server, but large incoming mail from external domains is still blocked using the default global settings. After reading here: http://support.microsoft.com/default.aspx?scid=kb;en-us;322679 I see that All Internet e-mail messages use the global setting for limits on sending and on receiving. The message categorizer evaluates the sender's sending limit and the recipient's receiving limit. In example 2 earlier, a user with a user mailbox limit of 3 MB could receive messages from another user with a 3-MB sending limit. Because Internet users use the global setting, they can send only a 2-MB message. Which to me is madness! Surely if I want to allow a user to receive mail up to a certain size then I should be able to set it as such? Is there a specific way of getting round this? Would setting the global defaults high and setting a lower, say 10MB, limit on the SMTP connector do the trick? Thanks.

  Read the article

• How do I set permissions on a Server 2003 folder

  - by Richard210363

  Hi There, In my part time position as entire IT department at my Office ( I'm a MCSD developer normally ) I have been asked to change a shared folder. Only I don't really understand all the Shared / Security options. I have a folder that must be accessed by 2 people in the company (and no one else). They both must have read/write/edit and change access. They must be able to read/write/edit each others files; existing or newly created. Should be easy but I'm a bit overwhelemd by all the choices. What should I set? Thanks for your help richard

  Read the article

• PHP on Server 2003: Enabling PHP_APC.DLL creates Error

  - by james.527.

  When trying to enable PHP_APC.DLL, PHP crashes returning invalid access to memory location. Any ideas? I am running 5.2.12 in ISAPI mode. Here is what I have enabled extension wise: ;extension=php_bz2.dll ;extension=php_curl.dll ;extension=php_dba.dll ;extension=php_dbase.dll ;extension=php_exif.dll ;extension=php_fdf.dll extension=php_gd2.dll ;extension=php_gettext.dll ;extension=php_gmp.dll ;extension=php_ifx.dll ;extension=php_imap.dll ;extension=php_interbase.dll extension=php_ldap.dll ;extension=php_mbstring.dll extension=php_mcrypt.dll ;extension=php_mhash.dll ;extension=php_mime_magic.dll ;extension=php_ming.dll ;extension=php_msql.dll ;extension=php_mssql.dll extension=php_mysql.dll extension=php_mysqli.dll ;extension=php_oci8.dll ;extension=php_openssl.dll extension=php_pdo.dll ;extension=php_pdo_firebird.dll ;extension=php_pdo_mssql.dll extension=php_pdo_mysql.dll ;extension=php_pdo_oci.dll ;extension=php_pdo_oci8.dll ;extension=php_pdo_odbc.dll ;extension=php_pdo_pgsql.dll extension=php_pdo_sqlite.dll ;extension=php_pgsql.dll ;extension=php_pspell.dll ;extension=php_shmop.dll ;extension=php_snmp.dll ;extension=php_soap.dll ;extension=php_sockets.dll extension=php_sqlite.dll ;extension=php_sybase_ct.dll ;extension=php_tidy.dll ;extension=php_xmlrpc.dll ;extension=php_xsl.dll extension=php_zip.dll extension=php_win32service.dll ultimately i'm trying to create a PHP based uploader with a progress bar. From what I understand PHP_APC is the only way to do this. If anyone could help me stabilize PHP_APC or know of another UL with progress bar method, it would be appreciated.

  Read the article

• Win Svr 2003 DHCP Bad Addresses

  - by VinceM

  After looking at other posts I still can figure this out. I'll start at the beginning... I inherited this network and I'm not the most knowledgeable about networking... We have a AD DHCP Server that is also our DNS server, We were having some VPN issues (on the same server) and my boss decided to disable routing and remote access, which cleared the settings. We couldn't get it set back up correctly so we rolled back to a backup drive they created a number of months ago. Since rolling back I've had Bad_Address listings in DHCP and there is a number of duplicate records in the DNS Forward Lookup Zones. We have less than 50 devices on the network but I have over 90 Bad Addresses showing. This server is currently running but we get IP address conflicts all the time on pretty much all the computers. I have had people do release and renew but it didn't help... I have also deleted and re-added the scope to no avail either. Any help or ideas would be greatly appreciated and I apologize if I missed another post that has information to help. Thanks, Vince

  Read the article

• pptp server 2003 hands out gateway from nic not dhcp server

  - by Pete

  I have created a pptp RRAS server for a handful of clients to connect to. I would like them to use the servers default gateway (.1) for internet access. They are able to successfully connect (& see LAN) but it then cuts them off the internet. I understand that all internet traffic would be routed through the pptp server but that's ok since I have enough pipe. The problem seems to be that: the clients gateway shows as their assigned RAS ip. The clients assigned DNS settings seem to be what is set to the servers nic not what I have specified in dhcp (which is the same server). DHCP relay agent properties points to the nic DHCP is running on (192.168.100.163). .1 is gateway in nic hw properties & dhcp. I have different dns secondary & third entries on my nic properties than what dhcp is configured for. The problem is that I have a 10.10.1.x network that people can not see if they uncheck the gateway option but, they are then unable to see our other hosted sites on the internet.

  Read the article

• Which external USB drives are compatable with 2003 server?

  - by Tony

  I have been using Seagate free agent GO drives on a windows 2003 server for backup. Sometimes I get a "Delayed Write Failed : Windows was unable to save all the data for the file F:\$Mft." error. I emailed Seagate technical support and the reply was "The product is not supported on Windows 2003 server." The WD elements external USB does not list 2003 as a supported OS. What is a good support external USB drive to use with Windows 2003 server?

  Read the article

• Creating excel template 2003 in C# on a machine with both 2003 and 2007 installed.

  - by Ragha J

  I have both 2003 and 2007 Excel versions installed on my machine. The current source code uses Office11 (2003) interop assembly Microsoft.Office.Interop.Excel.dll to create the Excel template. When I create the template and open in Excel 2007, it opens perfectly. The same template when I open in 2003 I get the message "File format is not valid". _excel = new Excel.Application(); _workbooks = _excel.Workbooks; _excel.Visible = false; _excel.DisplayAlerts = false; // create and add a workbook with 1 worksheet named "Sheet1" _workbook = _workbooks.Add(Excel.XlWBATemplate.xlWBATWorksheet); _sheet = (Excel.Worksheet)_workbook.ActiveSheet;

  Read the article

• VBA Word 2003 Dialog box

  - by user171476

  Hi, Our client enironment recently migrated from word 2000 to 2003, we use the below code in one of the templates to show the word's default insert file dialog box. Word is integrated with another third party application Hummingbird docspen. With Dialogs(wdDialogInsertFile) .Name = "q:*.*" .Show End With In old environment it opens up the default insertfile dialog box pointing to my documents folder, where as in word 2003, it opens up the Docsopen insertfile dialog box. I have compared the settings of word 2000 and 2003 it seems to be same. Any suggestions on this please.

  Read the article

• Expression Encoder SDK - WMA Pro Codec Issues with Windows Server 2003

  - by PortageMonkey

  I am using the Expression Encoder SDK to encode .avi and Flash files to a .wmv format suitable for Silverlight. By default, EE encodes files with audio using the the WMA PRO codec. If you are running Windows Server 2003, this is a problem as it doesn't support the WMA PRO codec and produces and error message similar to the following. Error Message: The Audio Profile settings do not match a valid system profile. Error Source: Microsoft.Expression.Encoder Error Target Site: System.String GetProfileString() I am looking for a way to change the default audio codec to something suitable for WS 2003. I am aware that although not supported natively, there is a highly invasive way to install Windows Media Player 11 and it's codecs on WS 2003 but this involves registry tinkering and other hacks not suitable for our production environments so that solution is out.

  Read the article

• Changing DFS link location from command line

  - by David Collantes

  I have the following AD DFS (Windows 2003 R2): DFS Root name: members DFS Link: me DFS Link Target: \\myserver\meshare DFS Link: you DFS Link Target: \\myserver\youshare I need to change all the link targets to \\theirserver, while keeping everything else the same. I have created the shares meshare and youshare on \\theirserver already, with the files they will hold. How to accomplish this from command line (I will batch it)? Will "dfscmd /move" be the command to use? If so, what would the exact syntax be?

  Read the article

• Send mail from a distrobution groups email address

  - by Campo

  A user has send permission on a distro group on a WINDOWS SERVER 2003 domain. I am the admin. When either of us send email using the distrobution groups email adress we get a non delivery report Your message did not reach some or all of the intended recipients. Subject: TEST Sent: 4/19/2010 4:46 PM The following recipient(s) cannot be reached: [email protected] on 4/19/2010 4:46 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=local/DC=DOMAIN:SERVERNAME Thanks, JC

  Read the article

• Eventtriggers frequence

  - by holian

  Masters, I try to set some event task on windows server 2003. I use this tutorial: http://www.petri.co.il/how-to-use-eventtriggersexe-to-send-e-mail-based-on-event-ids.htm My problem is when i set an event for example "If Event Id 528 in the security log, than send an e-mail.", then the eventrigger fire up the task continously, and i get the mail over and over. Any suggestion how to set eventriggers.exe to send e-mail once after the event occure in the event log? Thank you.

  Read the article

• Send mail from a distrobution groups email adress

  - by Campo

  A user has send permission on a distro group on a WINDOWS SERVER 2003 domain. I am the admin. When either of us send email using the distrobution groups email adress we get a non delivery report Your message did not reach some or all of the intended recipients. Subject: TEST Sent: 4/19/2010 4:46 PM The following recipient(s) cannot be reached: [email protected] on 4/19/2010 4:46 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=local/DC=DOMAIN:SERVERNAME Thanks, JC

  Read the article

• Windows Firewall failing after 9-12 hours?

  - by routeNpingme

  I have 2 VM servers in the exact same NIC configuration: Server 2003 R2, one NIC connected to private (hardware firewall) network in a 10.x private address space, and one NIC connected straight to public internet. Windows Firewall is enabled for the Public Internet NIC only. Now, what doesn't make sense - this fails generally after 9-12 hours. It's not exact, but once or twice a day, traffic will just stop on the Internet NIC. No event log entries when it happens, and restarting the Windows Firewall service as well as stopping or restarting IPSec Services (just for fun) has no effect. Once the server is rebooted, everything is fine again for another 1/2 day. Any suggestions?

  Read the article

• Send mail from a distribution group's email address

  - by Campo

  A user has send permission on a distro group on a WINDOWS SERVER 2003 domain. I am the admin. When either of us sends email using the distribution group's email adress we get a non delivery report Your message did not reach some or all of the intended recipients. Subject: TEST Sent: 4/19/2010 4:46 PM The following recipient(s) cannot be reached: [email protected] on 4/19/2010 4:46 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=local/DC=DOMAIN:SERVERNAME Thanks, JC

  Read the article

• Project 2003 SP2 failing to install SP3

  - by Unsliced

  I have Microsoft Project Professional 2003 installed (11.2.2005.1801.15, SP2). I have been trying to open a MPP file created in a newer version so need the converter, which is part of SP3. But when I try to install the SP3 package (as downloaded from Microsoft's site) I get an error message box: --------------------------- Project 2003 Service Pack 3 (SP3) --------------------------- The expected version of the product was not found on your system. --------------------------- OK --------------------------- Project (and Office) are licensed and otherwise work correctly. Any advice?

  Read the article

• SSIS: How to create and export data to Microsoft Access 2003 database?

  - by Sung Meister

  Goals - Automate exporting SQL Server 2005 views to Microsoft Access 2003 database (no transformation required) through SQL Server Job (with SSIS package) There is no "Access DB Destination" in BI toolbox. So the question is, How can I create an Access database (for me to load data to)?

  Read the article

• Register a dll in Windows Server 2003

  - by Karee

  I'm trying to register some DLLs for a particular application but having some problems. The DLLs are stored in the application folder in the D: drive. I run cmd.exe, go to the D: drive and run regsvr32, but it gives me the error: "The was loaded, but the DllRegisterServer entry point was not found. This file cannot be registered." After searching for other solutions, I also tried copying the DLLs into the C:\WINDOWS\system32 folder and running regsvr32 directly there but that didn't work either. It gave me the same error. I'm not very familiar with Windows Administration, so I may need detailed instructions/explanations. Any help would be greatly appreciated! Thank you very much!

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >