Search Results

Search found 10169 results on 407 pages for 'port'.

Page 19/407 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Open ports broken from internal network

  - by ksvi

  Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP.

  Read the article

• Router behind Router--second router (and its clients) cannot be "seen" even after both routers are D

  - by Trioke

  Couple of terminology I guess I should get out of the way for consistency's sake throughout the post: External Router/Modem - SMC 8014WG - External IP 173.32.144.134 - Internal IP 192.168.0.1 Internal Router - LinkSys WRT120N - "External" IP of 192.168.0.175 - Internal IP 192.168.1.1 - Connected via Ethernet Cable (a really long one, from the basement to the second floor) PC - IP 192.168.200 - Connected Wirelessly via WAP2 Personal. Laptop - Used to try and diagnose the problem, a 4th machine to the setup which won't be part of the final setup once everything works. The actual problem: I've tried setting the LinkySys router as a DMZ'd client on the SMC router, and then DMZ'd the actual PC on the LinkSys. So the DMZ looks like this: On the SMZ, client with IP 192.168.0.175 is DMZ'd. On the LinkSys, client with IP 192.168.1.200 is DMZ'd. No dice. I then tried port forwarding the necessary port on the SMC to the LinkSys (lets just say, port 80). Then port forwarded Port 80 on the LinkSys to the PC. Same as the DMZ scenario above, but change DMZ with port forwarding. No dice, still :(. Now here's where I went stupid--and tell me if one should never do this--I enabled both DMZ and port forwarding at the same time. I fired up Opera--my browser of choice ;)--typed in 173.32.144.134:6333 and... ... Third time is the charm they say? Well, clearly not. Otherwise I wouldn't be here ;). To diagnose the problem, I enabled "Allow remote access to the Admin panel" on the LinkSys router, and specified port 6333 as the port to use. I port forwarded port 6333 on the SMC to 192.168.0.175, and access my external IP of 173.32.144.134:6333 in hopes of seeing the Admin panel... No dice (I think I've ran out of dice by now ;)). So to see where the problem was, I connected a laptop to the SMC via LAN cable, and typed in 192.168.0.175:6333, and viola, Admin Panel access! So the problem looks like it lies with the SMC--But that's as far as I've got, I've done the port forwarding, the DMZ'ing, and I've even disabled the built-in firewall for safe measures, but nothing worked. So, here I am. Unable to connect to the PC behind the Internal router externally, and without anything to go on other than to come here and ask for the wisdom of the the superuser folks :). If any more detail is required, just ask. (Apologies in advance, if questions should never be this long winded!)

  Read the article

• Hosting website when port 80 is taken?

  - by cinqoTimo

  A few months ago, we purchased an R-HUB unit to replace WebEx for remote support. The device operates through port 80, ehich doesn't appear to be configurable. I know in IIS, you can specify a port besides port 80, but the problem is in the port forwarding. On our router, we have to map an incoming port to the forward port which then directs traffic to the node (webserver). However, the incoming port for both the webserver and the R-HUB is 80 - and the server seems to be getting confused as I can only get to the R-HUB, not the website. How can I expose both devices? Host header headers? DNS config?

  Read the article

• Server IP must be a LAN IP (Port Forwarding Netgear Router)? [closed]

  - by rphello101

  I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do? I'm using Windows 7 in case it matters.

  Read the article

• Port listening on localhost:8000 but not on ip:8000

  - by Marionette

  Hello I'm running a web application on port 8000. When I access it from the host server localhost:8000 it responds ok, 127.0.0.1:8000 also works, but 192.168.1.7:8000 does not work. 192.168.1.7 is the ip of my server. Also if i try to go to another web application running on port 80 it works 192.168.1.7 I enabled ufw firewall and set ufw default allow. I am using ubuntu server 12.04 Any suggestions on why I can't get to my app on port 8000 using the ip-address:8000? Thanks in advance!

  Read the article

• Apache wont work after changing port

  - by user73595

  I am working with ubuntu 12.04 server 64-bit edition. I have intalled apache2 without any problems and i can see the "It works" message. And i can also access from other pc within the network. I want to host my website using home DSL, However i found out that my ISP is blocking the port 80, 25 ,110 so i changed the port to 8010 (/etc/apache2/port.conf) After this I am unable to get the "It Works" web page. All it shows that "NOT FOUND" i tried with ipaddress:8010 and it doesnot work with both internal and also external.

  Read the article

• HDMI port not recognized on Sony Vaio

  - by julio

  I am running Ubuntu 11.10 64bit with a Sony VAIO VPC F11. It has an NVIDIA GeForce 310M video card, with the latest Nvidia drivers for the 64 bit linux, and a Windows partition with Win7 64bit. NVIDIA driver version is NVIDIA-Linux-x86_64-280.13 External monitor is Samsung SyncMaster P2770 If I boot into the Windows partition, the HDMI works as expected, with sound and video-- under linux, the HDMI port is not recognized at all, apparently, and provides no signal to the attached monitor. The nividia-settings tool does not recognize any monitor connected to the HDMI port. Disper is installed and cannot recognize an attached external monitor. Can anyone help me diagnose this issue and fix it if possible? The laptop has only the one HDMI port to connect any external monitor, so it I can't get this working I'm stuck using either the laptop screen or Windows. Thanks

  Read the article

• How do I open port 51413 for Transmission?

  - by user94159

  Just moved to ubuntu on my macbook and spend whole day trying to open transmission port 51413. Already done: I have ufw but i opened ports there and tried without it - probably not the problem 51413/tcp ALLOW Anywhere 51413/tcp ALLOW Anywhere (v6) 21/tcp ALLOW OUT Anywhere 80 ALLOW OUT Anywhere 143 ALLOW OUT Anywhere 2049 ALLOW OUT Anywhere 110 ALLOW OUT Anywhere 135,139,445/tcp ALLOW OUT Anywhere 137,138/udp ALLOW OUT Anywhere 25/tcp ALLOW OUT Anywhere 631 ALLOW OUT Anywhere 443/tcp ALLOW OUT Anywhere 53/udp ALLOW OUT Anywhere 123/udp ALLOW OUT Anywhere 993/tcp ALLOW OUT Anywhere 465/tcp ALLOW OUT Anywhere 51413/tcp ALLOW OUT Anywhere router Pirelli DRG A125G; tried disabling firewall, forwarding ports according portforward.com but I have no experience with such thing so I dont know if i succeeded On transmission still shows port blocked and nothing is downloading... CanYouSeeMe.org tried tu use to see if ports are open but it shows that port is blocked Also tried qbitorrent it also doesnt work

  Read the article

• Connecting to VPN / proxy with different port number

  - by user779159

  I have an IP address, port, username, and password for one of those VPN / proxy services that allows you to use an IP address other than what your ISP gives you, but in the 'Edit Connections VPN' GUI I don't see where to enter a port. I enter the IP address under 'Gateway' and the username and password where it asks for it, but it doesn't work. I try to enter it with the IP address ending with a colon, followed by the port, but that doesn't work either (e.g. "1.1.1.1:9999"). Any idea how I could make it work? I'm using Ubuntu 12.04 LTS. Thanks.

  Read the article

• Re-Route Mail to a port other than 25

  - by Ken

  Is there a way to route mail to another port? I have an email account attached to my laptop that I'd like to be able to send and receive mail from. Due to mobility, I'll be passing through various networks that will probably block this port. My dynamic DNS provider allows me to utilize web-forwards for MX domains; is this possible? where I can web forward to a domain:port which is managed by my DNS provider when I traverse between networks. If not, is there a way? Of course i could use web-mail or relay-forwarding from my home server, but that's not geeky enough.

  Read the article

• SSH refusing connection after changing default port

  - by wm90

  currently I'm handling 2 server (A and B). In server A I installed Ubuntu 12.10. I changed the SSH port into 1198 and it works fine. In server B it has been installed with Ubuntu 11.04. I tried to change the port number into 1198 as well but it refused the connection when I tried to connect again using Putty. I change the SSH configuration on /etc/ssh/sshd_config and I did restart the SSH using sudo service ssh restart. I was thinking its because of firewall allowed port but the firewall shows inactive when I run sudo ufw status. Any idea why this can happened?

  Read the article

• Change gui port(8080) utorrent

  - by user87073

  I'm fresh on Ubuntu, still learning how to use it. Recently I've been trying to install utorrent, which I already was able to do so, but I need the port 8080 free to use run tomcat/glassfish and on port 80 php. Briefly, how can I change utorrent port from 8080 to another one? I've been trying to find a solution for this issue for about 3 days now, I saw some solutions, such as create a utserver.config, but I have no clue in how to use it or config it by terminal or on properties, that is something hardly explained by anyone. Any help will be appreciated :D.

  Read the article

• port allocation in remoting

  - by user158182

  in remoting is it possible to connect a particular port(client) to a remote server, i can specify the server port,is there any posibilitis to specify a client port example if server runs in x machine and server port is 8085 and client runs in y where itconnects the server exactly with the specified port ,but the client is connected using a random port(can ispecify a client port),ican do it in basic sockets

  Read the article

• Comcast SMC Port Forwarding Issue

  - by Zach Fedora

  I have a Comcast SMCD3G modem/router and I've been having issues getting the port to forward - When I check an online "open-port-checker" it says the port is forwarded/they can see the port on my IP. (1 Static IP is assigned to the modem) But when I try to access port 80 for example on a browser, it times out. Also when I try to remote desktop to the server (Windows Server 2008 R2) it doesn't work, yet canyouseeme.org says it is open. Any ideas as to what the problem could be?

  Read the article

• C# Detect Localhost Port Usage

  - by ThaKidd

  In advance, thank you for your advice. I am currently working on a program which uses Putty to create a SSH connection with a server that uses local port forwarding to enable a client, running my software, to access the service behind the SSH server via localhost. IE: client:20100 - Internet - Remote SSH server exposed via router/firewall - Local Intranet - Intranet Web POP3 Server:110. Cmd Line: "putty -ssh -2 -P 22 -C -L 20100:intranteIP:110 -pw sshpassword sshusername@sshserver" Client would use putty to create a SSH connection with the SSH server specifying in the connection string that it would like to tie port 110 of the Intranet POP3 Server to port 20100 on the client system. Therefore the client would be able to open up a mail client to localhost:20100 and interact with the Internal POP3 server over the SSH tunnel. The above is a general description. I already know what I am trying to do will work without a problem so am not looking for debate on the above. The question is this...How can I ensure the local port (I cannot use dynamic ports, so it must be static) on localhost is not being used or listened to by any other application? I am currently executing this code in my C# app: private bool checkPort(int port) { try { //Create a socket on the current IPv4 address Socket TestSocket = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); // Create an IP end point IPEndPoint localIP = new IPEndPoint(IPAddress.Parse("127.0.0.1"), port); // Bind that port TestSocket.Bind(localIP); // Cleanup TestSocket.Close(); return false; } catch (Exception e) { // Exception occurred. Port is already bound. return true; } } I am currently calling this function starting with a specific port in a for loop to get the 'false' return at the first available port. The first port I try is actually being listened to by uTorrent. The above code does not catch this and my connection fails. What is the best method to ensure a port is truly free? I do understand some other program may grab the port during/after I have tested it. I just need to find something that will ensure it is not currently in use AT ALL when the test is executed. If there is a way to truly reserve the localhost port during the test, I would love to hear about it.

  Read the article

• Should we increase local port range limit on busy memcached servers

  - by Majid Azimi

  nixcraft has a tutorial on configuring memcached server(link) at the end says: For busy memcached server you need to increase system file descriptor and IP port limits here is the code to do so: # Increase system IP port limits net.ipv4.ip_local_port_range = 2000 65000 why should we do this? memcached is a server and it will respond to clients with its listening port which is 11211 by default. So we shouldn't be limited by local port range.(net.ipv4.ip_local_port_range) The only limit is file descriptors. local port range should be a limit for servers like squid which generate local traffic

  Read the article

• Windows Server 2008 and port 80

  - by Frank

  Hi experts, I'm having an issue with my Windows Server 2008. I can successfuly connect to it with FTP(port 21), remote desktop(whatever the port number is), https but not with simple http or port 80, from the outside of my LAN. Is there some settings I don't know about regarding this special port on the firewall or on IIS7? For your information, I can connect to port 80 as long as I'm on the same LAN, but as soon as the request come from the outside, I get nothing... Please help Thank you

  Read the article

• Why does my Belkin wireless router has eMule port open?

  - by Jeremy Powell

  I have a Belkin F6D4230-4 v1 router. When I port scan it with nmap I get the following: $ sudo nmap -sS -A -T5 192.168.2.1 -p- Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-17 11:40 CDT Interesting ports on 192.168.2.1: Not shown: 65532 closed ports PORT STATE SERVICE VERSION 80/tcp open http Belkin 2307 wifi router http config (IP_SHARER httpd 1.0) |_ html-title: '+i1+' 4661/tcp filtered unknown 4662/tcp filtered edonkey MAC Address: 00:22:75:5D:52:D8 (Belkin International) Device type: WAP|broadband router|firewall|printer|specialized|webcam Running (JUST GUESSING) : Linksys embedded (95%), TRENDnet embedded (95%), Netgear embedded (92%), Canon embedded (89%), On Time RTOS (89%), Symantec embedded (89%), D-Link embedded (86%), Polycom embedded (85%) Aggressive OS guesses: Linksys WRT54GC or TRENDnet TEW-431BRP wireless broadband router (95%), TRENDnet TW100-BRF114 broadband router (95%), Netgear FR114P ProSafe VPN firewall (92%), Canon PIXMA MX850 printer (89%), On Time RTOS (89%), Symantec Firewall/VPN 100 (89%), D-Link DI-714P+ wireless broadband router (86%), Polycom ViewStation video conferencing system (85%) No exact OS matches for host (test conditions non-ideal). Network Distance: 1 hop Service Info: Device: WAP OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ . Nmap done: 1 IP address (1 host up) scanned in 21.57 seconds Why are the 4461 and 4462 ports open? This is a basic, out-of-the-box installation.

  Read the article

• Looking for a small, portable, port-mirroring ethernet switch.

  - by user37244

  I recently had a mac go haywire, taking half a minute or more to get www.google.com loaded. Getting its owner to give up the machine for repair was like pulling teeth - they were insisting that it must be something to do with the network, since so much had changed with the local configuration at about the same time their box went haywire. I eventually set up a port mirror to a box that I could remote to so I could show that the mac was only irregularly getting packets onto the network. Demonstrating this faced an additional challenge: the latency of the remote desktop software I was using meant that I had to point to timestamps instead of just the moment the packet flashed up on the screen as my evidence. This particular user was the reason this was so challenging this time around, but I would like to have a box that I can cart from desk to desk to use wireshark on my laptop at any station where I need it. 3com, cisco, netgear, etc. (ad nauseum), all make switches that can be configured for port mirroring, but in my case, the smaller, the better. For the sake of my sanity, I'll probably end up running it off a battery anyway. If my laptop had two ethernet ports, this would be easy. So, whaddya recommand for a device that requires 0 configuration at each powerup (though I'm fine with poking at it for a while to set it up initially.) Small, light, and cheap enough to get it past purchasing? Thanks,

  Read the article

• JDBC connections: How to specify the port for data-transfer?

  - by LeO

  I wanto to run my JDBC-connection (either Oracle or MSSQL) through a proxy-server. Reason for this is to have additional controls of the traffic, especially for developing. I know, I could specify the proxy, which runs on my machine, and the port in the connection-string. But the specified connection-settings are only taken as some kind of handshake to agree on which port the data is finally transferred. And this is defenitly not the port which I have under proxy-control. So, does anybody have an idea, how to specify the port for the data-transfer? I would prefer if this could be done in the connection-string. The same issue applies for Oracle and MSSQL. Thx LeO

  Read the article

• Where has my parallel port gone? ioperm(888,1,1) returns -1.

  - by marcusw

  I have an old Dell Dimension 8200 running Gentoo which I use solely to control various things using the parallel port. After shutting it down a few weeks ago, I started it up again today and tried to access the parallel port like I usually do. Unfortunately, my code bombed out when it tried to call ioperm(888,1,1) to grab the parallel port which returned an error code of -1. There have been no changes to the system be it hardware or software, no updates, no tweaking, no dropping the case, no over-amping the data pins, nothing. The port and the software have been working fine for months with no changes, and were working fine when I shut it down last. Running my code with root privileges changes nothing. What is breaking this and how can I fix it?

  Read the article

• subdomain .htaccess redirection via ssh remote port forwarding

  - by Achim

  I ask you to help me URL redirecting a subdomain to a SSH remote forwarded port: The current setup is the following: The server A have a local webserver running on port 80. This server is connected to a DSL line or a GPRS connection where the IP address changes often. To prevent a DynDNS setup we established a SSH remote port forwarding to a server B with a static IP adress. This is done on server A by the following statement: ssh -N -p 80 -g -R 10000:localhost:80 tunneling@<Server B IP> So by accessing the new port 10000 of the servers B IP-adress, all traffic is forwarded to the server A port 80 - this works fine! But to offer a more comfortable url to the user I want to hide the server B IP-adress and offer a subdomain. My domain provider allows to add subdomains and redirections to some other servers. In general, this works, I've tested this with different servers. But it don't work if the destination is the port forwarded port of server B. The initial redirection is done, the request is send to server A and the response are forwarded to server B and shown in the browser - fine. But then the URL within the browser is switched away from the subdomain to the IP:port of server B. So the user don't see the subdomain in the URL string of the browser anymore. I've tried this with my providers subdomain redirection, as well as .htaccess redirect, as well as META refresh, the problem always persist. Is there a parameter in the ssh reverse forwarding setup (I guess this is the place where the fix have to be) to keep the typed in subdomain URL and not show the IP. Thanks Achim

  Read the article

• Clear data at serial port in Linux in C?

  - by ipkiss

  Hello guys, I am testing the sending and receiving programs with the code as The main() function is below: include include include include include include include "read_write.h" int fd; int initport(int fd) { struct termios options; // Get the current options for the port... tcgetattr(fd, &options); // Set the baud rates to 19200... cfsetispeed(&options, B9600); cfsetospeed(&options, B9600); // Enable the receiver and set local mode... options.c_cflag |= (CLOCAL | CREAD); options.c_cflag &= ~PARENB; options.c_cflag &= ~CSTOPB; options.c_cflag &= ~CSIZE; options.c_cflag |= CS8; // Set the new options for the port... tcsetattr(fd, TCSANOW, &options); return 1; } int main(int argc, char **argv) { fd = open("/dev/pts/2", O_RDWR | O_NOCTTY | O_NDELAY); if (fd == -1) { perror("open_port: Unable to open /dev/pts/1 - "); return 1; } else { fcntl(fd, F_SETFL, 0); } printf("baud=%d\n", getbaud(fd)); initport(fd); printf("baud=%d\n", getbaud(fd)); char sCmd[254]; sCmd[0] = 0x41; sCmd[1] = 0x42; sCmd[2] = 0x43; sCmd[3] = 0x00; if (!writeport(fd, sCmd)) { printf("write failed\n"); close(fd); return 1; } printf("written:%s\n", sCmd); usleep(500000); char sResult[254]; fcntl(fd, F_SETFL, FNDELAY); if (!readport(fd,sResult)) { printf("read failed\n"); close(fd); return 1; } printf("readport=%s\n", sResult); close(fd); return 0; } read_write.h: #include <stdio.h> /* Standard input/output definitions */ include /* String function definitions */ include /* UNIX standard function definitions */ include /* File control definitions */ include /* Error number definitions */ include /* POSIX terminal control definitions */ int writeport(int fd, char *chars) { int len = strlen(chars); chars[len] = 0x0d; // stick a after the command chars[len+1] = 0x00; // terminate the string properly int n = write(fd, chars, strlen(chars)); if (n < 0) { fputs("write failed!\n", stderr); return 0; } return 1; } int readport(int fd, char *result) { int iIn = read(fd, result, 254); result[iIn-1] = 0x00; if (iIn < 0) { if (errno == EAGAIN) { printf("SERIAL EAGAIN ERROR\n"); return 0; } else { printf("SERIAL read error %d %s\n", errno, strerror(errno)); return 0; } } return 1; } and got the issue: In order to test with serial port, I used the socat (https://help.ubuntu.com/community/VirtualSerialPort ) to create a pair serial ports on Linux and test my program with these port. The first time the program sends the data and the program receives data is ok. However, if I read again or even re-write the new data into the serial port, the return data is always null until I stop the virtual serial port and start it again, then the write and read data is ok, but still, only one time. (In the real case, the sending part will be done by another device, I am just taking care of the reading data from the serial port. I wrote both parts just to test my reading code.) Does anyone have any ideas? Thanks a lot.

  Read the article

• Can I use a serial port as TCP/IP interface on Red Hat Linux?

  - by ShaChris23

  Background We want to run an FTP server on a Red Hat Enterprise OS. The problem is, the machine we have does not have an Ethernet port/interface (please don't ask why; it's just a project requirement). We only have a serial port. Question Is there COTS / open source software that I can use to make serial port "look" like a an Ethernet port? My project is commercial. We run Red Hat Enterprise Linux 5.3. Note: Pardon me if my post title is unclear. If you can think of a better title, please suggest or simply change the title.

  Read the article

• Parallel port no longer accessible even though no changes to system.

  - by marcusw

  I have an old Dell Dimension 8200 running Gentoo which I use solely to control various things using the parallel port. After shutting it down a few weeks ago, I started it up again today and tried to access the parallel port like I usually do. Unfortunately, my code bombed out when it tried to call ioperm(888,1,1) to grab the parallel port which returned an error code of -1. There have been no changes to the system be it hardware or software, no updates, no tweaking, no dropping the case, no over-amping the data pins, nothing. The port and the software have been working fine for months with no changes, and were working fine when I shut it down last. Running my code with root privileges changes nothing. What is breaking this and how can I fix it?

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >