Search Results

Search found 10169 results on 407 pages for 'port'.

Page 21/407 | < Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >

• proftpd, dynamic IP, and filezilla: port troubles

  - by Yami

  The basic setup: Two computers, one running proftpd, one attempting to connect via filezilla. Both linux (xubuntu on the server, kubuntu on the client). Both are at the moment behind a router on a residential (read: dynamic IP) connection; the client is a laptop I plan to take away from the home network, so I'll need this to work externally. I have my router set up to allow specific ports forwarded to each machine and, where possible, have plugged in those numbers into proftpd (via gadmin, double-checking the config file) and filezilla. Attempting to connect via active mode using the internal IP works: Status: Connecting to 192.168.1.139:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 192,168,1,52,153,140 Response: 200 PORT command successful Command: LIST Response: 150 Opening ASCII mode data connection for file list Response: 226 Transfer complete Status: Directory listing successful Attempting to connect via the domain name, however, leads to issues; in active mode, the PORT is the last command to be received according to the server's logs, and in passive mode, it's the PASV command. This leads me to believe I'm being redirected to a bad port? Active Sample: Status: Resolving address of <url> Status: Connecting to <ip:port> Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER <redacted> Response: 331 Password required for <redacted> Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PORT 174,111,127,27,153,139 Response: 200 PORT command successful Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing Passive sample: Status: Resolving address of ftp.bonsaiwebdesigns.com Status: Connecting to 174.111.127.27:8085... Status: Connection established, waiting for welcome message... Response: 220 Crossroads FTP Command: USER yamikuronue Response: 331 Password required for yamikuronue Command: PASS ******* Response: 230 Anonymous access granted, restrictions apply Command: OPTS UTF8 ON Response: 200 UTF8 set to on Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is the current directory Command: TYPE I Response: 200 Type set to I Command: PASV Response: 227 Entering Passive Mode (64,95,64,197,101,88). Command: LIST Error: Connection timed out Error: Failed to retrieve directory listing In both cases, the log file ends at "PORT" or "PASV" - there's no record of ever receiving a "LIST" command. Just above that I can see the attempt to connect actively via the internal IP, which does indeed include a LIST command. My config file includes "PassivePorts 20001-26999", which are the port forwards I set up for the ftp server, and "Port 8085", which is also forwarded to the same machine. I also have a MasqueradeAddress set up to prevent it from reporting its internal IP, which was an earlier issue I had. I think what I'm asking is, is there another setting someplace I have to change to get this setup to work?

  Read the article

• Open ports broken from internal network

  - by ksvi

  Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP. Note: I know I could just use the internal IP inside of the network to access this service. But if I have a laptop that must be able to do this both from inside and outside it would be annoying to constantly switch between 1.2.3.4 and 192.168.1.100 in the software configuration. Router output: > iptables -t nat -L -n Chain PREROUTING (policy ACCEPT) target prot opt source destination ACCEPT all -- 0.0.0.0/0 224.0.0.0/3 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 to:192.168.1.101 DNAT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:25 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 to:192.168.1.101 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:12345 to:192.168.1.102 DNAT udp -- 0.0.0.0/0 192.168.1.1 udp dpt:53 to:217.118.96.203 Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 192.168.1.0/24 0.0.0.0/0 Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• net.tcp Listener Adapter and net.tcp Port Sharing Service not starting on reboot

  - by Peter K.

  I am using the net.tcp protocol for various web services. When I reboot my Windows 7 Ultimate (64-bit) macbook pro, the service never restarts automatically, even though that is how they are set: The only relevant events I can see are in the System Event Log: Error 6/9/2011 19:47 Service Control Manager 7001 None The Net.Tcp Listener Adapter service depends on the Net.Tcp Port Sharing Service service which failed to start because of the following error: The service did not respond to the start or control request in a timely fashion." Error 6/9/2011 19:47 Service Control Manager 7000 None The Net.Tcp Port Sharing Service service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion." Error 6/9/2011 19:47 Service Control Manager 7009 None A timeout was reached (30000 milliseconds) while waiting for the Net.Tcp Port Sharing Service service to connect. This post suggests that it's something else blocking the port (in the post it's SCCM 2007 R3 Client which I don't use). What else could be the problem? If it's something else blocking the port, how do I figure out what? When I manually start the services, they start correctly. Dependencies are: Net.Tcp Port Sharing Service Net.Tcp Listener Adapter Still no luck, but I think the problem might be that my network connection takes too long to come up. I put in a custom view of the event log, and found these items: The first in the series says: A timeout was reached (30000 milliseconds) while waiting for the Net.Tcp Port Sharing Service service to connect.

  Read the article

• on debian, lighttpd apache2 using 80 port, lighttpd throws :address already use error

  - by user1960581

  I bought the linode(linode.com) server the other day. I've been trying to run lighttpd and apache2 at the same port, using lighttpd for static files. As linode is only providing ONE ipv4 address, I tried to bind lighttpd on the ipv6 address. That's where I got the same error each and very single time: can't bind to port [ipv6] 80 Address already in use. I tried bind the ipv4 address. Everything worked. Please help me, this is driving me nuts for the last two days. my lighttpd.conf file:(the ipv6 address isn't true) server.modules = ( "mod_access", "mod_alias", "mod_compress", "mod_redirect", # "mod_rewrite", ) server.document-root = "/var/www" server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) server.errorlog = "/var/log/lighttpd/error.log" server.pid-file = "/var/run/lighttpd.pid" server.username = "www-data" server.groupname = "www-data" server.port = 80 server.bind = "2600:3c02::0000" server.use-ipv6 = "enable" #server.pid-file = "/var/run/lighttpd.pid" index-file.names = ( "index.php", "index.html", "index.lighttpd.html" ) url.access-deny = ( "~", ".inc" ) static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ( "application/javascript", "text/css", "text/html", "text/plain" ) # default listening port for IPv6 falls back to the IPv4 port #include_shell "/usr/share/lighttpd/use-ipv6.pl " + server.port include_shell "/usr/share/lighttpd/create-mime.assign.pl" include_shell "/usr/share/lighttpd/include-conf-enabled.pl" ### ipv6 ### $SERVER["socket"] == "[2600:3c02::0000]:80" { # accesslog.filename = "var/log/lighttpd/ipv6/access.log" # server.document-root = "/var/www/" # server.error-handler-404 = "/index.php?error=404" } and the error message: can't bind to port, 2600:3c02::0000 Address already in use.

  Read the article

• ipv6 port 445 does not accept the request from a global type address

  - by blacktea

  I want to scan the port 445 in windows server 2003, but my scanner only have one type ipv6 address which is global not link-local. When I do this,I find that I can't find port 445 open. But I use the command "netstat -an" to assure the port 445 is listening. Finally I find this confusing phenomenon: 1.when I set a link-local ddress in my scanner, then it will work in scanning port 445. 2.when I only set a global address in my scanner, it doed not work. This means if a host with a link-local address use socket to send a syn packet to the port 445 in server 2003, it will receive a ack packet. But if with a global address it will receive a rst packet. Thus, I can't scan the port 445 in server 2003 with a global address. I need to know why? Can anybody help? And I use the netsh-firewall to check the exception and netsh-interface-ipv6 to turn off the firewall on the specific interface. Still can't establish the connection with port 445, do you have any ideal about this ?

  Read the article

• How to use DNS/Hostnames or Other ways to resolve to a specific IP:Port

  - by tomaszs

  This is a Canonical Question about DNS/Hostnames resolution to IPs/Ports Example 1 I'm running a web server on port 80 and another on port 87. I would like to use DNS so that www.example.com goes to port 87. How can I accomplish this using DNS only? Example 2 I'm running a service on my server on a non-standard port. How can I get clients to connect to this non-standard port automatically? Can I use DNS? Is there some application specific support where DNS could indicate the IP and Port? Example 3 Do some application protocols specifically support hostname awareness, and allow special actions to be taken based on this information? Are there other questions on Server Fault that cover some of these? Commandeering: This question was originally asking about running IIS and Apache on the same server, but the same concepts can be applied to any server software receiving connections from clients. The Answers below describe the technical problems and solutions of using DNS and application protocol support to assign a port number for a client to connect.

  Read the article

• port forwarding with socks over proxy

  - by Oz123

  I am trying to browse a wiki that runs on a server inside one domain from another domain. The wiki is accessible only on the LAN, but I need to browse it from another LAN to which I connect with an SSH tunnel ... Here is my setup and the steps I did so far: ~.ssh/confing on wikihost: Host gateway User kisteuser Port 443 Hostname gateway.companydomain.com ProxyCommand /home/myuser/bin/ssh-https-tunnel %h %p # ssh-https-tunnel: # http://ttcplinux.sourceforge.net/tools/stunnel Protocol 2 IdentityFile ~/.ssh/key_dsa LocalForward 11069 localhost:11069 Host server1 User kisteuser Hostname localhost Port 11069 LocalForward 8022 server1:22 LocalForward 17001 server1:7100 LocalForward 8080 www-proxy:3128 RemoteForward 11069 localhost:22 from wikihost myuser@wikihost: ssh -XC -t gateway.companydomain.com ssh -L11069:localhost:22 server1 on another terminal: ssh gateway.companydomain.com Now, on my companydomain I would like to start firefox and browse the wiki on wikihost. I did: [email protected] ~ $ ssh gateway Have a lot of fun... kisteuser@gateway ~ $ ssh -D 8383 localhost user@localhost's password: user@wikiserver:~> My .ssh/config on that side looks like that: host server1 localforward 11069 localhost:11069 host localhost user myuser port 11069 host wikiserver forwardagent yes user myuser port 11069 hostname localhost Now, I started firefox on the server called gateway, and edited the proxy settings to use SOCKSv5, specifying that the proxy should be gateway and use the port 8383... kisteuser@gateway ~ $ LANG=C firefox -P --no-remote And, now I get the following error popping in the Terminal of wikiserver: myuser@wikiserver:~> channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused Confused? Me too ... Please help me understand how to properly build the tunnels and browse the wiki over SOCKS protocol. update: I managed to browse the wiki on wikiserver with the following changes: host wikiserver forwardagent yes user myuser port 11069 hostname localhost localforward 8339 localhost:8443 Now when I ssh gateway I launch Firefox and go to localhost:8339 and I hit the start page of the wiki, which is served on Port 8443. Now I ask myself is SOCKS really needed? Can someone elaborate on that ?

  Read the article

• Create Second Web Application using the Default port 80 In SharePoint2010

  - by ybbest

  As a SharePoint developer, one of the common tasks is to create SharePoint Web Application. In this post I will show you how to create second Web Application using the default port 80 in SharePoint2010.You need to follow the steps below. 1. Go to Central Admin => Application Management =>Manage web applications and click new Web Application 2. I choose YBBEST as my IIS site name and host header name, change the port number to 80 and leave the rest settings as default. 3. After the web application creation wizard completes, add an entry in the host file located at C:\Windows\System32\Drivers\etc\hosts . 4. Create a root site collection for the new web application. After the site collection is created , you can browse to the site collection using URL http://ybbest.

  Read the article

• Accessing SQL Server using an IP Address and Port Number ... Help!

  - by Mike

  I need to access an SQL Server that is on a machine behind a firewall and you access this machine using an ip address like 95.95.95.33:6930 (not the real ip address) ... But, you get my point that by accessing 95.95.95.33 on port 6930, the firewall routes the requests to that particular machine ... My question is ... How do you construct a connection string to access the machine at address 95.95.95.33:6930 and then further access the SQL Server on port 1433 or maybe a different port like 8484 ??? Thanks Mike

  Read the article

• Intel obligé de rappeler ses puces Sandy Bridge, à cause d'un problème de port SATA

  Intel obligé de rappeler ses puces Sandy Bridge à cause d'un problème de port SATA, il pourrait lui en coûter 1 milliard de dollars Mise à jour du 01.02.2011 par Katleen Parfois, une petite erreur peut chambouler de grandes choses. C'est ce qui est en train d'arriver à Intel, avec ces processeurs Sandy Bridge. La compagnie se voit en effet contrainte de les rappeler, ce qui risque de perturber le travail des constructeurs de PCs. En effet, les puces de la gamme Series 6 (qui sont incorporées dans tous les systèmes Sandy Bridge) ont un problème avec leur port SATA (Cougar Point) : il risque de "se dégrader avec le temps", ce qui pourrait avoir un impact sur les performances ou la fo...

  Read the article

• Find "secret" port number

  - by CJ Sculti

  this may be kind of an odd question. My friend has challenged me. So somehow, he change the "port" of his site to 31337. If you just go to domain.com, you get redirected to google, to access the real site you go to domain.com:31337. He is going to change it again and he is challenging me to find out which port it is. Is this possible without guessing? Hopefully someone can help! Thanks. Oh, and is this the right stack exchange site to post this on...

  Read the article

• Why does a port occasionally stop listening? This happens only on occasion

  - by Binh Nguyen

  I have a Windows Service written in C# that listens on port 8591. I also have a web application hosted in IIS on the same server that makes request to the service. On occasion the port will stop listening and throws the following error: "No connection could be made because the target machine actively refused it 127.0.0.1:8591". This happened 3 times in 2 months and just resolves itself. I can also fix it manually by restarting the service. I'm wondering if any one else has run into this problem and has possible suggestions to resolve. I'm a developer and have worked with our windows group extensively and they assure me there is no firewall or AV blocking the port on occasion. This is running on Windows Server 2008 R2. Very puzzled at what could be causing this to happen. Please let me know if you need more information.

  Read the article

• Port numbers appended to anchor tags

  - by glifchits

  I've built a static site. Locally, when I serve the content with python -m SimpleHTTPServer everything behaves normally, but when I copy the HTML onto the server and browse the site at the server's URL, some links will have a port number appended to the domain. For example: url.com:84/path where the correct path is url.com/path. The port number is usually different, always between 81-85. It is an Apache server. I'm not experienced with web server configuration, and I'm not the admin of the server. Let me know if there is more information that can help solve my problem. ~> cat /etc/*release* SuSE SLES-8 (i386) VERSION = 8.1 UnitedLinux 1.0 (i586) VERSION = 1.0 LSB_VERSION="1.2" DISTRIB_ID="UnitedLinux" DISTRIB_RELEASE="1.0" DISTRIB_DESCRIPTION="UnitedLinux 1.0 (i586)"

  Read the article

• Help me upgrade my pf.conf for OpenBSD 4.7

  - by polemon

  I'm planning on upgrading my OpenBSD to 4.7 (from 4.6) and as you may or may not know, they changed the syntax for pf.conf. This is the relevant portion from the upgrade guide: pf(4) NAT syntax change As described in more detail in this mailing list post, PF's separate nat/rdr/binat (translation) rules have been replaced with actions on regular match/filter rules. Simple rulesets may be converted like this: nat on $ext_if from 10/8 -> ($ext_if) rdr on $ext_if to ($ext_if) -> 1.2.3.4 becomes match out on $ext_if from 10/8 nat-to ($ext_if) match in on $ext_if to ($ext_if) rdr-to 1.2.3.4 and... binat on $ext_if from $web_serv_int to any -> $web_serv_ext becomes match on $ext_if from $web_serv_int to any binat-to $web_serv_ext nat-anchor and/or rdr-anchor lines, e.g. for relayd(8), ftp-proxy(8) and tftp-proxy(8), are no longer used and should be removed from pf.conf(5), leaving only the anchor lines. Translation rules relating to these and spamd(8) will need to be adjusted as appropriate. N.B.: Previously, translation rules had "stop at first match" behaviour, with binat being evaluated first, followed by nat/rdr depending on direction of the packet. Now the filter rules are subject to the usual "last match" behaviour, so care must be taken with rule ordering when converting. pf(4) route-to/reply-to syntax change The route-to, reply-to, dup-to and fastroute options in pf.conf move to filteropts; pass in on $ext_if route-to (em1 192.168.1.1) from 10.1.1.1 pass in on $ext_if reply-to (em1 192.168.1.1) to 10.1.1.1 becomes pass in on $ext_if from 10.1.1.1 route-to (em1 192.168.1.1) pass in on $ext_if to 10.1.1.1 reply-to (em1 192.168.1.1) Now, this is my current pf.conf: # $OpenBSD: pf.conf,v 1.38 2009/02/23 01:18:36 deraadt Exp $ # # See pf.conf(5) for syntax and examples; this sample ruleset uses # require-order to permit mixing of NAT/RDR and filter rules. # Remember to set net.inet.ip.forwarding=1 and/or net.inet6.ip6.forwarding=1 # in /etc/sysctl.conf if packets are to be forwarded between interfaces. ext_if="pppoe0" int_if="nfe0" int_net="192.168.0.0/24" polemon="192.168.0.10" poletopw="192.168.0.12" segatop="192.168.0.20" table <leechers> persist set loginterface $ext_if set skip on lo match on $ext_if all scrub (no-df max-mss 1440) altq on $ext_if priq bandwidth 950Kb queue {q_pri, q_hi, q_std, q_low} queue q_pri priority 15 queue q_hi priority 10 queue q_std priority 7 priq(default) queue q_low priority 0 nat-anchor "ftp-proxy/*" rdr-anchor "ftp-proxy/*" nat on $ext_if from !($ext_if) -> ($ext_if) rdr pass on $int_if proto tcp to port ftp -> 127.0.0.1 port 8021 rdr pass on $ext_if proto tcp to port 2080 -> $segatop port 80 rdr pass on $ext_if proto tcp to port 2022 -> $segatop port 22 rdr pass on $ext_if proto tcp to port 4000 -> $polemon port 4000 rdr pass on $ext_if proto tcp to port 6600 -> $polemon port 6600 anchor "ftp-proxy/*" block pass on $int_if queue(q_hi, q_pri) pass out on $ext_if queue(q_std, q_pri) pass out on $ext_if proto icmp queue q_pri pass out on $ext_if proto {tcp, udp} to any port ssh queue(q_hi, q_pri) pass out on $ext_if proto {tcp, udp} to any port http queue(q_std, q_pri) #pass out on $ext_if proto {tcp, udp} all queue(q_low, q_hi) pass out on $ext_if proto {tcp, udp} from <leechers> queue(q_low, q_std) pass in on $ext_if proto tcp to ($ext_if) port ident queue(q_hi, q_pri) pass in on $ext_if proto tcp to ($ext_if) port ssh queue(q_hi, q_pri) pass in on $ext_if proto tcp to ($ext_if) port http queue(q_hi, q_pri) pass in on $ext_if inet proto icmp all icmp-type echoreq queue q_pri If someone has experience with porting the 4.6 pf.conf to 4.7, please help me do the correct changes. OK, this is how far I've got: I commented out nat-anchor and rdr-anchor, as describted in the guide: #nat-anchor "ftp-proxy/*" #rdr-anchor "ftp-proxy/*" And this is how I've "converted" the rdr rules: #nat on $ext_if from !($ext_if) -> ($ext_if) match out on $ext_if from !($ext_if) nat-to ($ext_if) #rdr pass on $int_if proto tcp to port ftp -> 127.0.0.1 port 8021 match in on $int_if proto tcp to port ftp rdr-to 127.0.0.1 port 8021 #rdr pass on $ext_if proto tcp to port 2080 -> $segatop port 80 match in on $ext_if proto tcp tp port 2080 rdr-to $segatop port 80 #rdr pass on $ext_if proto tcp to port 2022 -> $segatop port 22 match in on $ext_if proto tcp tp port 2022 rdr-to $segatop port 22 rdr pass on $ext_if proto tcp to port 4000 -> $polemon port 4000 match in on $ext_if proto tcp tp port 4000 rdr-to $polemon port 4000 rdr pass on $ext_if proto tcp to port 6600 -> $polemon port 6600 match in on $ext_if proto tcp tp port 6600 rdr-to $polemon port 6600 Did I miss anything? Is the anchor for ftp-proxy OK as it is now? Do I need to change something in the other pass in on... lines?

  Read the article

• Unable to enumerate USB device on port 2 when connecting Android phone

  - by ProfessionalAmateur

  I'm running Ubuntu 11.10 (64-bit) as a VirtualBox guest on a Win7 64-bit host. When I plug in my Android Epic4g (Galaxy S) both the host and guest see the device properly, however lsusb does not. When I run dmesg I get the following: [ 361.664219] usb 1-2: new full speed USB device number 79 using ohci_hcd [ 362.428798] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 363.313782] hub 1-0:1.0: unable to enumerate USB device on port 2 I get the same type of dmesg message with the USB 2.0 (ECHI) Controller enabled and disabled for the guest OS. I'm stuck with this one, can anyone help?

  Read the article

• .NET SerialPort.Read skipps bytes

  - by Lukas Rieger

  Solution Reading the data byte wise via "port.ReadByte" is too slow, the problem is inside the SerialPort class. i changed it to reading bigger chunks via "port.Read" and there are now no buffer overruns. although i found the solution myself, writing it down helped me and maybe someone else has the same problem and finds this via google... (how can i mark it as answered?) EDIT 2 by setting port.ReadBufferSize = 2000000; i can delay the problem for ~30 seconds. so it seems, .Net really is too slow... since my application is not that critical, i just set the buffer to 20MB, but i am still interested in the cause. EDIT i just tested something i had not thought of before (shame on me): port.ErrorReceived += (object self, SerialErrorReceivedEventArgs se_arg) => { Console.Write("| Error: {0} | ", System.Enum.GetName(se_arg.EventType.GetType(), se_arg.EventType)); }; and it seems that i have an overrun. Is the .Net implementation too slow for 500k or is there an error on my side? Original Question i built a very primitive oszilloscope (avr, which sends adc data over uart to an ftdi chip). On the pc side i have a WPF Programm that displays this data. The Protokoll is: two sync bytes (0xaffe) - 14 data bytes - two sync bytes - 14 data bytes - ... i use 16bit values, so inside the 14 data bytes are 7 channels (lsb first). I verified the uC Firmware with hTerm, and it does send and receive everything correct. But, if i try to read the data with C#, sometimes some bytes are lost. The oszilloscop programm is a mess, but i created a small sample application, which has the same symptoms. I added two extension methods to a) read one byte from the COM Port and ignore -1 (EOF) and b) wait for the sync pattern. The sample programm first syncs onto the data stream by waiting for (0xaffe) and then compares the received bytes with the expected values. the loop runs a few times until an assert failed message pops up. I could not find anything about lost bytes via google, any help would be appreciated. Code using System; using System.Collections.Generic; using System.Diagnostics; using System.IO.Ports; using System.Linq; using System.Text; using System.Threading.Tasks; namespace SerialTest { public static class SerialPortExtensions { public static byte ReadByteSerial(this SerialPort port) { int i = 0; do { i = port.ReadByte(); } while (i < 0 || i > 0xff); return (byte)i; } public static void WaitForPattern_Ushort(this SerialPort port, ushort pattern) { byte hi = 0; byte lo = 0; do { lo = hi; hi = port.ReadByteSerial(); } while (!(hi == (pattern >> 8) && lo == (pattern & 0x00ff))); } } class Program { static void Main(string[] args) { //500000 8n1 SerialPort port = new SerialPort("COM3", 500000, Parity.None, 8, StopBits.One); port.Open(); port.DiscardInBuffer(); port.DiscardOutBuffer(); //Sync port.WaitForPattern_Ushort(0xaffe); byte hi = 0; byte lo = 0; int val; int n = 0; // Start Loop, the stream is already synced while (true) { //Read 7 16-bit values (=14 Bytes) for (int i = 0; i < 7; i++) { lo = port.ReadByteSerial(); hi = port.ReadByteSerial(); val = ((hi << 8) | lo); Debug.Assert(val != 0xaffe); } //Read two sync bytes lo = port.ReadByteSerial(); hi = port.ReadByteSerial(); val = ((hi << 8) | lo); Debug.Assert(val == 0xaffe); n++; } } } }

  Read the article

• Dell L501X Display Port Screen issue

  - by jdflorezPA

  I got a Dell XPS L501X with a mini display port to VGA connector for my External Screen. On Displays it shows me: Acer Technologies 24" (which is the monitor) but only lets me up to 1024x768 resolution (The native resolution of this monitor is 1920x1200). I tried adding a new mode with xrandr, but when I applied it, it reverted back to 1024x768. As far as I know, the display port is controlled by the Intel card, right? Any ideas or suggestions would be appreciated. Thanks Using Ubuntu 11.10 32bit

  Read the article

• Basic serial port listening application

  Scans for installed serial ports, queries the supported baud rates and start listening to the port in a separate thread.

  Read the article

• Port flash game to native android

  - by wirate

  Alright here is the problem: the creators of a quite popular flash-based game have asked me to port their game to Android. They are not interested in any other platforms so we don't need to be worrying about iOS or PC. They want the best performance on just Android (I guess that's the point of porting a flash-based game. They could have just went with it) They found Unity 'slow'. How would the performance (on android) of other engines compare? Are they expecting too much i.e. finding Unity slow? I am in favor of Unity since development is a little easier with more things being visual (I am not experienced as you might have guessed). This would be an example of the type of game I am to port Thanks!

  Read the article

• UDP port binding by multiple applications?

  - by moon

  hello i am trying to bind multiple applications running on different pc's across a single lan network is it a good idea when all applications are receiving on same port and sending at same port for example. app1 (receiving at 10000 port , sending at some ip2 and 10000 port) app2 (receiving at 10000 port , sending at some ip1 and 10000 port) any other good idea for performing this task is also accepted .

  Read the article

• Apache/2.4.7 (Ubuntu) Server at localhost Port 80

  - by w3coder

  I am new at Ubuntu and LAMP. This problem is going on during making local server. Please help me. I have made local server. It is working on my browser : localhost/phpmyadmin But whhen I try localhost/joompark/installation/index.php on browser....... it show the Port 80 error. joompark is my folder name. All file and folder are right place var/www/joompark The Result is: Not Found The requested URL /joompark/installation/index.php was not found on this server. Apache/2.4.7 (Ubuntu) Server at localhost Port 80 Thanks in advance

  Read the article

• Win 2k3 Connections Limit per ip:port

  - by DanSpd

  Hello, I want to limit connections number per ip on specific port. Should I use some firewall or anything else? Advice please. P.S. Port doesn't have to be port 80, or 3389. It can be any port

  Read the article

• How to use DNS to redirect domain to specific port on my server

  - by Tomaszs

  I'm running a web server on port 80 and another on port 87. I would like to use DNS so that www.example.com goes to port 87. How can I accomplish this using DNS only? Canonical Question: This question was originally asking about running IIS and Apache on the same server, but the same concepts can be applied to any server software receiving connections from clients. The Answers below describe the technical problems with using DNS to assign a port number for a client to connect.

  Read the article

• Mass Port Forwarding?

  - by Devoted

  Hi I had trouble but I finally port forwarded 21-23 and thus got SSH working on my Ubuntu machine. If I want to do other things with it such as FTP, should I just port forward 1-10000 so I don't have to worry about port forwarding each individual port? What are the advantages/disadvantages of this?

  Read the article

• Java: Check what processes are bound to a port?

  - by bguiz

  Hi, I am developing an application in Netbeans, and it is using JavaDB. I can connect to it and execute queries without issues, but for some reason, the "Output - JavaDB Database Process" pane within Netbeans keeps displaying Security manager installed using the Basic server security policy. Could not listen on port 1527 on host localhost: java.net.BindException: Address already in use How do I find out what process is already using, or bound to that port? On Ubuntu Karmic, Netbeans 6.7.1

  Read the article

< Previous Page | 17 18 19 20 21 22 23 24 25 26 27 28  | Next Page >