Search Results

Search found 4726 results on 190 pages for 'ram jaiswal'.

Page 19/190 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Can I extend my total RAM by buying more, and what kind do I need to buy

    - by Xeon06
    I currently have 4 GB total RAM and I would like to get some more, to bring it to a total of 8 GB. Is it possible to simply buy another 4 GB and bring it to 8? If so, what kind should I be buying? There is a lot of different possibilities, DDR3, DDR2, clock speed, etc. I am kind of lost among all this. My current setup goes like this: ACER EG43M mainboard Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz 4 total RAM slots, 2 occupied by 2 GB sticks According to CPU-Z, my memory type is DDR3 (not sure how reliable that is) Full CPU-Z dump Windows 7 64-bit So basically, I want to know whether it's possible to extend my current RAM to get 8 GB total by buying another 4, and if so, what kind of RAM do I need? Note that I am not looking for shopping recommendations. I'm worried about the hardware compatibility.

    Read the article

  • Why is RAM usage so high on an idle server? [duplicate]

    - by DeeDee
    This question already has an answer here: Why is Linux reporting “free” memory strangely? 2 answers I'm investigating a server used for scientific data analysis. It's running RHEL 6.4 It has almost 200GB of RAM. It's been running very slowly for users via SSH, and after some poking around I quickly noticed that the RAM usage was sky-high. What's odd is that even in an idle state it's still using a ton of RAM: I also looked via htop and I can't see that any running process is using more than 0.1% of the RAM. So I wonder what's going on? Right now the only user-initiated process running is an rsync between two NFS-mounted shares. I tried rebooting the server and it was much more responsive for a few minutes, but then memory usage shot up again. Is there any way I can pinpoint why memory usage is so high?

    Read the article

  • System crashes/lockups + compiz/cairo/gnome-panel crashing due to cached ram, please help?

    - by Kristian Thomson
    Can someone help me to troubleshoot system crashes and lockups which result in compiz/cairo dock and gnome-panel crashing? I also get no window borders after the crash and a lot of kernel memory errors. Logs are telling me that apps were killed due to not enough memory, but the system is caching like 14GB of my ram so I'm a bit stuck on what/how to stop it. I'm running Ubuntu 12.10 on a 2011 Mac Mini with 16 GB ram. Here's some of the logs that look like they could be causing trouble. I woke up this morning to find chrome/skype/cairo dock and a few others had been killed and here is what the log said. Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959890] Out of memory: Kill process 12247 (chromium-browse) score 101 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.959893] Killed process 12247 (chromium-browse) total-vm:238948kB, anon-rss:17064kB, file-rss:20008kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972283] Out of memory: Kill process 10976 (dropbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.972288] Killed process 10976 (dropbox) total-vm:316392kB, anon-rss:115484kB, file-rss:16504kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975890] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9310.975895] Killed process 11515 (tray_icon_worke) total-vm:63336kB, anon-rss:15960kB, file-rss:11436kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281535] Out of memory: Kill process 10887 (rhythmbox) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.281539] Killed process 10887 (rhythmbox) total-vm:528980kB, anon-rss:92272kB, file-rss:36520kB Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283110] Out of memory: Kill process 10889 (skype) score 3 or sacrifice child Nov 5 04:00:45 linkandzelda-Macmini kernel: [ 9311.283113] Killed process 10889 (skype) total-vm:415056kB, anon-rss:84880kB, file-rss:22160kB I went to look deeper into things and saw that the whole time I'm having these kernel errors with out of memory and something mentioning radeon. I have a Radeon HD 6600M graphics card using the open source driver, not the proprietary one. I was wondering if perhaps using the proprietary one would solve the problem. Also, while writing this in Chrome rhythmbox and chrome just got killed while typing this, due to out of memory errors or so it reports, though I have 7 GB of free RAM at the time with 7 GB cached as well. Here is a full copy of my logs that happened in kern.log simply from when I began typing this question. http://pastebin.com/cdxxDktG Thanks in advance, Kris

    Read the article

  • Ubuntu Variant / Linux Distros which uses least system resources (RAM, CPU)?

    - by elegantonyx
    I have a netbook (an older Asus EEEPC 1005HA) which I want to get rid of Windoze on (I like Windows, but I don't think it works well in a netbook environment). Basically, my question is which Ubuntu variant will use the least RAM and CPU running idle, and/or the same question except when running Firefox and Libreoffice Writer, say. I am also open to suggestions of non-Ubuntu Linux distros, but since this is AskUbuntu I thought the first question would be more appropriate. I have a disk drive which I can attach to the netbook, so it doesn't have to be a Ubuntu Variant / Linux Distro which solely boots from a USB drive. I have at my disposal: DVDs, DVD writer/ disk drive, 4gb flash drive, 8 gb flash drive I was thinking either Lubuntu or Archbang / Crunchbang but I would like some help from more knowledgable people Specs: Can't boot into it right now, but I think I have either Intel Atom N270 @1.60ghz OR Intel Atom N280 @1.66ghz (single core, I think) 2gb RAM 160 GB hard drive

    Read the article

  • Ubuntu 12.04 NVIDIA GeForce Go 7600 black screen during boot

    - by Florian Schmidt
    I'm using Ubuntu as the only operating system since two years. In the first Ubuntu versions I had seen my BIOS screen and the boot screens. Actually im using Ubuntu 12.04 and my screen stays black until Ubuntu is started (both screens are missing). I guess this situation appeared the first time in Ubuntu 11 (not sure). I searched via google and tried the popular activities but was not able to fix my issue. I opened the laptop and checked all connections. I'm using boot option nomodeset. I had a look through many many web pages. I don't know how to continue and hope somebody could be helpful. My hardware: Acer Aspire 9300 AMD Turion 64 x2 NVIDIA GeForce Go 7600 (using proposed driver) lspci | grep NVIDIA 00:00.0 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:04.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 03:00.0 VGA compatible controller: NVIDIA Corporation G73 [GeForce Go 7600] (rev a1) So my question is what to do to fix the black screen during boot?

    Read the article

  • Running KVM/XEN/Hyper-V VMs from a RAM disk, is this possible? Practical?

    - by Ausmith1
    Currently I'm using ESX (v3 and v4) to test a scripted OS (Windows 2003) and application install DVD. The DVD ISO (8GB) is mounted on a 1Gbps NFS datastore and the VMDK's (20GB) are on an SSD mounted via NFS over a 10Gbps link. It still takes a lot longer than I'd really like for to run through a test iteration and I'm wondering if mounting the virtual disks and ISO on a RAM disk on the same server as the hypervisor is running on would be worth my while. I can dedicate a server to this VM and 32GB of RAM in the system should be adequate to do the trick I'd guess. (1GB hypervisor OS, 28GB RAM disk and 2GB for the VM is < the 32GB available to me) Since hosting a RAM disk within ESX does not seem possible I'm open to trying KVM/Xen/Hyper-V. KVM would probably be my first choice of these three. Anyone out there tried this? Bear in mind this is purely for a test run of the installer, the VM will be discarded as soon as the test is completed so I'm not worried about losing data from the remote possibility of a power failure.

    Read the article

  • Would a PHP application benefit from being served from a RAM drive?

    - by Tom Marthenal
    I am in charge of hosting a PHP application that is large and slow, but easy to scale. The application is entirely static, with writable disk storage needed. We've profiled the application, and the main bottleneck appears to come from loading the application and not the work the application does. The application is not CPU-intensive, although it does use a fair amount of memory (think Magento). Currently we distribute it by having a series of servers with the same PHP files on their hard drive and a load balancer in front of them. Easy but expensive. I've been reading about RAM disks and the IO benefits they offer, and was wondering if they would be well-suited to PHP applications. Since PHP applications are loaded from disk for every request and often involve lots of different files (as opposed to being kept in memory like with a Java application), I would figure that disk performance can be a severe bottleneck. Would placing the PHP files on a RAM disk and using the mount point as Apache's document root offer performance benefits? A startup script could create the RAM drive and then copy the files (which are plain-text and small) from a permanent location to the temporary RAM drive. Does this make sense, or should I just trust the linux kernel to cache the appropriate files in memory by itself?

    Read the article

  • Why doesn't the value in /proc/meminfo seem to map exactly to the system RAM?

    - by Eric Asberry
    The values in /proc/meminfo for MemTotal don't make sense. As a human, eyeballing it, it seems to roughly correspond to the installed RAM, but for using it to display the installed RAM from an automated utility it appears to be inexact, and inconsistent. For a system with 1G of RAM, I would expect the MemTotal line to have a value of 1048576 - 1024*1024. But instead, I'm seeing 1029392. On another 4G box, I'm seeing 3870172, which is not a multiple of 1024, and it's not even close to 1029392*4. On an 8G box, I get 8128204, which again seems to have no correlation to the other values, nor is it a multiple of 1024. I'm trying to use this information to report the RAM on a status web page. My work-around is to just "round" it to the nearest 1G multiple, but I'd like to understand why these values seem inconsistent and don't match my expectations. Can somebody fill me in on what I'm missing here? EDIT: To expand on the accepted answer below.... The reference can be found here. Also of interest to me from that page, which explains the inconsistency, is this bit: meminfo: Provides information about distribution and utilization of memory. This varies by architecture and compile options. ...

    Read the article

  • How can I optimize Apache to use 1GB of RAM on my website? [closed]

    - by Markon
    My VPS plan gives me 1GB of RAM burstable to 2GB. Of course I cannot use 2 GB, nor 1 GB, everyday, so I'm planning to optimize the performance of my webserver. The average of hits-per-hour is about 8'000-10'000. This means about 2 connections-per-second. Max hits-per-hour reached until now is about 60'000. That means about 16 connections-per-second. Unluckily my current apache configuration uses too much memory (when there are not connected clients - usually during the night - it uses about 1GB) so I've tried to customize the apache installation to fit to my needs. I'm using Ubuntu, kernel 2.6.18, with apache2-mpm-worker, since I've read it requires less memory, and fcgid ( + PHP). This is my /etc/apache2/apache2.conf: Timeout 45 KeepAlive on MaxKeepAliveRequests 100 KeepAliveTimeout 10 <IfModule mpm_worker_module> StartServer 2 MinSpareThreads 25 MaxSpareThreads 75 MaxClients 100 MaxRequestsPerChild 0 </IfModule> This is the output of ps aux: www-data 9547 0.0 0.3 423828 7268 ? Sl 20:09 0:00 /usr/sbin/apache2 -k start root 17714 0.0 0.1 76496 3712 ? Ss Feb05 0:00 /usr/sbin/apache2 -k start www-data 17716 0.0 0.0 75560 2048 ? S Feb05 0:00 /usr/sbin/apache2 -k start www-data 17746 0.0 0.1 76228 2384 ? S Feb05 0:00 /usr/sbin/apache2 -k start www-data 20126 0.0 0.3 424852 7588 ? Sl 19:24 0:02 /usr/sbin/apache2 -k start www-data 24260 0.0 0.3 424852 7580 ? Sl 19:42 0:01 /usr/sbin/apache2 -k start while this is ps aux for php5: www-data 7461 2.9 2.2 142172 47048 ? S 19:39 1:39 /usr/lib/cgi-bin/php5 www-data 23845 1.3 1.7 135744 35948 ? S 20:17 0:15 /usr/lib/cgi-bin/php5 www-data 23900 2.0 1.7 136692 36760 ? S 20:17 0:22 /usr/lib/cgi-bin/php5 www-data 27907 2.0 2.0 142272 43432 ? S 20:00 0:43 /usr/lib/cgi-bin/php5 www-data 27909 2.5 1.9 138092 40036 ? S 20:00 0:53 /usr/lib/cgi-bin/php5 www-data 27993 2.4 2.2 142336 47192 ? S 20:01 0:50 /usr/lib/cgi-bin/php5 www-data 27999 1.8 1.4 135932 31100 ? S 20:01 0:38 /usr/lib/cgi-bin/php5 www-data 28230 2.6 1.9 143436 39956 ? S 20:01 0:54 /usr/lib/cgi-bin/php5 www-data 30708 3.1 2.2 142508 46528 ? S 19:44 1:38 /usr/lib/cgi-bin/php5 As you can see it use a lot of memory. How can I reduce it to fit to just 1GB of RAM? PS: I also think about the switch to nginx, if Apache can't fit to my needs...

    Read the article

  • How to know the maximum capacity of memory/RAM of a server? [closed]

    - by Nam G. VU
    I have a Dell PowerEdge T410 and have installed 16Gb RAM for it. I don't know if I can extend it to 32Gb, 64Gb, ... RAM on this server. As the description, it seems I have no such choice. So my question is, how to know exactly the maximum capacity of memory/RAM of a server? I need this information so as to verify the number by myself. ps. My server is not exactly the same as the description on Dell website - I indeed modify the configuration to meet my budget. Currently my server is my purchased server configuration

    Read the article

  • Can I upgrade an Asus M51Sn laptop to 2x4GB of RAM? (DDR2)

    - by matteo
    My Asus M51Sn has 2 RAM slots which currently have 1x1GB + 1x2GB DDR2-800 SODimm RAM modules installed. I've found out that 4GB DDR2 SODimm modules do exist, though they are impossible to find in local stores nere here, but I've found them in online stores like these: http://www.pccomponentes.com/g_skill_ddr2_800_pc2_6400_4gb_so_dimm.html They seem to meet the specification, so can I replace both my current modules with 2x4GB modules, and reach a total of 8GB? Or should I worry about some limit (e.g. 4GB max or 2GB per slot) imposed by the matherboard, chipset or whatever? (I currently use Ubuntu 12.04 32 bit, so I plan to use the pae kernel, which supposedly supports 4GB ram on a 32bit system; or I may consider switching tu 64bit ubuntu; the question is about hardware limitations, not OS limitations).

    Read the article

  • How to configure nginx to serve static contents from RAM?

    - by Vijayendra Tripathi
    I want to set up nginx as my web server. I want to have image files cached in the memory (RAM) rather then disk. I am serving a small page and want few images always served from RAM. I dont wish to use varnish (or any other such tools) for this as I believe nginx has a capability to cache contents into RAM. I am not sure as how may I configure nginx for this? I did try few combinations but they didn't work. nginx uses disk all the time to get images. For example, when I tried apache benchmark to test with following command - ab -c 500 -n 1000 http://localhost/banner.jpg I get following error - socket: Too many open files (24) I guess this means nginx is trying to open to many files simultaneously from the disk and OS is not allowing this operation. Can anyone please suggest me a correct configuration? Thanks for considering this message.

    Read the article

  • What are the specifications on the RAM inside my computer?

    - by Faken
    I have a Dell Dimension 9200 that I bought 4 years ago. I want to find out the exact specifications (manufacturer, speed, timings, etc.). Is there a way to get this specific info without having to open up the PC (it's buried in and under a bunch of furniture, I'd perfer not to have to dig it out). All I know about it right now is that it is 4 1GB sticks of DDR2 RAM at 667 Mhz. It is the standard RAM that shipped with the computer 4 years ago (from Dell). Does anyone know what the specifications are of the RAM that Dell used in this particular model of computer 4 years ago? Note: I've done my research before coming here. CPU-Z, EVEREST, and AIDA32 all have been unable to give me any more information other than 4 x 1GB @ 667Mhz. I can't find any specifications in the Dell online manuals either (at least not as specific as I want). Thanks -Faken

    Read the article

  • Why is my Asus P5PL2-E using 640MB of RAM (out of 4GB) ? [closed]

    - by Tom
    Possible Duplicate: Windows XP and RAM 3.5GB+ I've recently installed 4GB of RAM on my server, which is running Windows XP SP2 32-bit and My Computer showed that only 3.37GB were installed. After digging Google for a bit, I couldn't find anything helpful, but I do remember reading a post in a forum regarding the motherboard using 640MB of RAM. Digging in my own BIOS, I've also found that my motherboard has also reserved that amount for its self. Why does my motherboard reserve this memory and how can I tune it down to say 128MB?

    Read the article

  • PC wont boot with more than 1 stick of RAM.

    - by Aidan
    Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

    Read the article

  • PC wont boot with more than 1 stick of RAM.

    - by Aidan
    Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

    Read the article

  • Do I need more RAM for programming if I switch to a 64 Bit OS?

    - by Buttercup
    Hi, Given that today (for performance reasons?) variables are usually aligned to the "bit-width" (I wanted to use "word-width" here, but on x86 a "word" is still 16 bits right?) of the processor, would switching from a 32 bit OS to its 64 bit version double the RAM usage? Would this then in turn mean that to do the same work a 32 bit OS can do with 4 GB RAM (well, the 3.x GB actually...) with a 64 bit OS I would need 8 GB of RAM for programming? Please note that I'm only talking about everyday x86 computers here.

    Read the article

  • Web & SQL Hosting 32 vs. 16 GB of ram

    - by TravisK
    I'm in the market for a new dedicated host for my website. My question is I can pay more to upgrade to 32GB of RAM, but it seems overkill for my website right now, in fact, 16GB seems a little overkill. However, I run a lot of pretty intense full text searches for my site. I'm wondering if SQL Server would benefit, or could it be configured to use the 32 GB of RAM if I purchase the additional to help speed things up? I am assuming that most of my latency is caused by disk I/O and that for the extra money spent on RAM, I might not see any improvement in overall speed?

    Read the article

  • How would I measure the amount of RAM needed per Glassfish domain? [closed]

    - by oligofren
    Possible Duplicate: Can you help me with my capacity planning? In our test environment we have a lot of apps spread out over a few servers and Glassfish domains. To make versioning easier I would have liked to have one Glassfish domain per customer per app (kind of like a heavyweight version of lots of jetty instances). But I have heard that Glassfish is kind of heavy on the resources, and so I would need to measure approximately how many instances would fit in the available RAM. These are low-traffic/low load testing servers, so CPU is not really an issue, though RAM might be. How would I get an approximate measure of how much RAM is needed? This is one Glassfish 3 instance with one heavy EAR application deployed. top? jvmstats? ??

    Read the article

  • Why does installing NVidia 9600GT graphics card, take 1GB of RAM away from Windows?

    - by Nick G
    Hi, I've changed graphics cards in my PC and now Windows 7 (32bit) is reporting that I have a whole gigabyte less physical RAM in my PC. Why is this? Firstly, the machine has 4GB of physical RAM. The old card was an ATI 2600XT with 256MB and the new card is an NVidia 9600GT with 512MB. With the ATI card windows sees 3326MB. With the NVidia card, windows sees 2558MB. I realise that due to address space restrictions I will not see all 4GB with 32bit windows, but why is there such a massive loss of RAM when simply changing cards (bearing in mind BOTH cards have their own RAM and borrow no main memory like some built on chipsets do). Would using 64 bit windows solve this? Thanks Nick.

    Read the article

  • BSOD Before Windows Will Loads - Graphics Related

    - by Brian
    Alright deep breath here: (Windows 7 Home Premium 64 bit btw) Today I installed Star Craft 2 Beta. After trying to log in, it had some issues where it said my device stopped working (referring to my video device I have to imagine). After I force quit the game there were some random "hot" (various colors if i remember correctly) pixels on the screen. I decided to reboot and try again with similar results. I figured that maybe my display drivers could stand to be updated (I don't frequently update them as I don't often run into problems). I went out to nVidia's website and grabbed the latest drivers for Windows 7 64 bit GeForce 9 series. (I have SLi-ed 9800 GTs). Everything seemed to install fine and I performed the restart. This is when things went from bad (can't play SC2 beta ;) ) to worse (can't boot into windows!). Initially the very first splash screen - I think it's the bios splash screen - had lines of colored pixels covering it. It then displayed a screen that had lots of "(" on it. After that it showed the normal windows 7 splash screen as if it were going to load into Windows. Before getting much further, it BSODed on me. It was a 0x0000003B stop error. At nvlddmkm.sys. A little digging let verified that this was a problem with an nVidia graphics device, not a real shocker. Windows decided it would try to help me diagnose the problem, which it's only answer to was a System Restore, which did nothing to alleviate the problem. I was able to boot up fine in safe mode and was not able to roll back the driver, however I did uninstall the driver and reboot. I still had the graphical anomalies during the first two screens (same colored "."'s and weird "("'s), but there was NOT a stop error. Windows loaded up, found a default driver for the device and installed it and I restarted to let it load - and had yet another BSOD Stop error. Repeat driver uninstall, this time I reloaded the same version (I think it's possible that I was running a 32 bit version or a vista versus windows 7 version, but I don't have that information handy) of the nVidia driver from their website. Restart, same anomalies, same Stop Error. I am at a loss - At this point all I can think is that the firmware for the Video cards got fried or there's actual damage to the cards which I sincerely hope is not the case but the sooner I know the better. Any insight into what I might be able to do to troubleshoot/fix this problem would be most helpful. Attached below is a dump from DxDiag. Please let me know if there is more info that I could provide. ------------------ System Information ------------------ Time of this report: 3/18/2010, 23:22:48 Machine name: BRIAN-PC Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255) Language: English (Regional Setting: English) System Manufacturer: Dell Inc System Model: XPS 630i BIOS: Phoenix - AwardBIOS v6.00PG Processor: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (4 CPUs), ~2.3GHz Memory: 8192MB RAM Available OS Memory: 8190MB RAM Page File: 1855MB used, 14521MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7600.16385 32bit Unicode DxDiag Previously: Crashed in DirectShow (stage 1). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Sound Tab 3: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Manufacturer: Chip type: DAC type: Device Key: Enum\ Display Memory: n/a Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1600 x 1200 (32 bit) (1Hz) Driver Name: Driver File Version: () Driver Version: DDI Version: unknown Driver Model: unknown Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: {D7B70EE0-4340-11CF-B123-B03DAEC2CB35} Vendor ID: 0x0000 Device ID: 0x0000 SubSys ID: 0x00000000 Revision ID: 0x0000 Driver Strong Name: Unknown Rank Of Driver: Unknown Video Accel: Deinterlace Caps: n/a D3D9 Overlay: n/a DXVA-HD: n/a DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (Realtek High Definition Audio) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek Digital Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Realtek HDMI Output (Realtek High Definition Audio) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0888&SUBSYS_10280249&REV_1001 Manufacturer ID: 1 Product ID: 100 Type: WDM Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail WHQL Logo'd: n/a Date and Size: 8/18/2008 04:05:28, 1485592 bytes Other Files: Driver Provider: Realtek Semiconductor Corp. HW Accel Level: Basic Cap Flags: 0x0 Min/Max Sample Rate: 0, 0 Static/Strm HW Mix Bufs: 0, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (Realtek High Definition Audio) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 Description: Realtek Digital Input (Realtek High Definition Audio) Default Sound Capture: No Default Voice Capture: No Driver Name: RTKVHD64.sys Driver Version: 6.00.0001.5667 (English) Driver Attributes: Final Retail Date and Size: 8/18/2008 04:05:28, 1485592 bytes Cap Flags: 0x0 Format Flags: 0x0 ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: ESA FW Update Attached: 1 Controller ID: 0x0 Vendor/Product ID: 0x0955, 0x000A FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x10DE, 0x026D | Matching Device ID: usb\root_hub | Service: usbhub | +-+ USB Input Device | | Vendor/Product ID: 0x0955, 0x000A | | Location: Port_#0002.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant device | | | Vendor/Product ID: 0x0955, 0x000A | | | Matching Device ID: hid_device | | +-+ USB Input Device | | Vendor/Product ID: 0x046D, 0xC01E | | Location: Port_#0003.Hub_#0001 | | Matching Device ID: generic_hid_device | | Service: HidUsb | | | +-+ HID-compliant mouse | | | Vendor/Product ID: 0x046D, 0xC01E | | | Matching Device ID: hid_device_system_mouse | | | Service: mouhid ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 324.3 GB Total Space: 608.4 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: D: Free Space: 1.0 GB Total Space: 2.0 GB File System: NTFS Model: WDC WD64 00AAKS-75A7B SCSI Disk Device Drive: E: Model: TSSTcorp DVD+-RW TS-H653F SCSI CdRom Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7600.16385 (English), , 0 bytes -------------- System Devices -------------- Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B7&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&18 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AF&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0A Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_10DE&DEV_03A3&SUBSYS_02491028&REV_A2\3&2411E6FE&1&00 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0267&SUBSYS_02491028&REV_A1\3&2411E6FE&1&78 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B6&SUBSYS_02491028&REV_A1\3&2411E6FE&1&10 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AE&SUBSYS_02491028&REV_A1\3&2411E6FE&1&09 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0272&SUBSYS_02491028&REV_A3\3&2411E6FE&1&52 Driver: n/a Name: NVIDIA nForce Serial ATA Controller Device ID: PCI\VEN_10DE&DEV_0266&SUBSYS_02491028&REV_A1\3&2411E6FE&1&70 Driver: n/a Name: LSI 1394 OHCI Compliant Host Controller Device ID: PCI\VEN_11C1&DEV_5811&SUBSYS_02491028&REV_70\4&14591D7E&0&2880 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B5&SUBSYS_02491028&REV_A1\3&2411E6FE&1&06 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AD&SUBSYS_02491028&REV_A1\3&2411E6FE&1&08 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_0270&SUBSYS_02491028&REV_A2\3&2411E6FE&1&48 Driver: n/a Name: Standard Dual Channel PCI IDE Controller Device ID: PCI\VEN_10DE&DEV_0265&SUBSYS_02491028&REV_A1\3&2411E6FE&1&68 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&4BABE2A&0&0028 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B4&SUBSYS_02491028&REV_A1\3&2411E6FE&1&07 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&01 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_026F&SUBSYS_CB8410DE&REV_A2\3&2411E6FE&1&80 Driver: n/a Name: NVIDIA nForce PCI System Management Device ID: PCI\VEN_10DE&DEV_0264&SUBSYS_02491028&REV_A3\3&2411E6FE&1&51 Driver: n/a Name: NVIDIA GeForce 9800 GT Device ID: PCI\VEN_10DE&DEV_0605&SUBSYS_062D10DE&REV_A2\4&10BD3C89&0&0018 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B3&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0E Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AB&SUBSYS_02491028&REV_A1\3&2411E6FE&1&04 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_10DE&DEV_026E&SUBSYS_02491028&REV_A3\3&2411E6FE&1&59 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_10DE&DEV_0260&SUBSYS_02491028&REV_A3\3&2411E6FE&1&50 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BC&SUBSYS_02491028&REV_A1\3&2411E6FE&1&11 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B2&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0D Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03AA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&02 Driver: n/a Name: Standard OpenHCD USB Host Controller Device ID: PCI\VEN_10DE&DEV_026D&SUBSYS_02491028&REV_A3\3&2411E6FE&1&58 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03BA&SUBSYS_02491028&REV_A1\3&2411E6FE&1&12 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B1&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0C Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A9&SUBSYS_02491028&REV_A1\3&2411E6FE&1&03 Driver: n/a Name: High Definition Audio Controller Device ID: PCI\VEN_10DE&DEV_026C&SUBSYS_02491028&REV_A2\3&2411E6FE&1&81 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_10DE&DEV_03B8&SUBSYS_000010DE&REV_A1\3&2411E6FE&1&28 Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03B0&SUBSYS_02491028&REV_A1\3&2411E6FE&1&0B Driver: n/a Name: PCI standard RAM Controller Device ID: PCI\VEN_10DE&DEV_03A8&SUBSYS_02491028&REV_A2\3&2411E6FE&1&05 Driver: n/a Name: NVIDIA nForce Networking Controller Device ID: PCI\VEN_10DE&DEV_0269&SUBSYS_02491028&REV_A3\3&2411E6FE&1&A0 Driver: n/a --------------- EVR Power Information --------------- Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

    Read the article

  • Hosting rails sites; vps or shared, and how much ram? [closed]

    - by raphael_turtle
    Possible Duplicate: How to find web hosting that meets my requirements? I have 3 rails sites to launch, all of which are fairly small and consisting of a custom cms, one with an online store, and 2 sinatra sites which are mainly static, portfolio sites. What would be the best way to host these sites (I've deployed on dreamhost shared before and some vps's) Is it best to manage them together under one vps? e.g linode $20/m (for the cheapest option, 512mb and would that even be enough ram?) or keep each rails site separate and host each one on a small vps? e.g $4/m (there's often lots of deals like this on webhostingtalk) I'm currently hosting the sinatra sites for free on heroku but finding it a bit slow sometimes.

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >