Search Results

Search found 15906 results on 637 pages for 'scott and the dev team'.

Page 19/637 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Drag and Drop Team Selection

  - by davidjwest

  I have a Fantasy F1 Website, currently users select their teams using dropdown menus. It works OK but isn't as user friendly as I would like. I would like to implement a drag and drop type of system, there's jQuery code out there that would go part of the way to allowing me to do this: http://jqueryui.com/demos/draggable/ But I am not sure about how to integrate that into PHP and MySQL, my jQuery skills are limited! I'd also need to stop them spending more than a certain amount of money, each driver has a value and the teams can only spend a certain amount of money. There's also limits for example you can only pick a driver once, but you can have three different drivers. Finally, how would you decide that the user had picked their team, I don't want a submit button as that kind of defeats the object of the exercise! Thanks for any advice, I don't expect anyone to write the code for me but some pointers would be greatly appreciated.

  Read the article

• Failed to install GRUB on a separate '/boot' partition on a fake RAID 0 (12.04LTS)

  - by gerben

  I'm having some problems getting GRUB configured for Ubuntu 12.04LTS on a fake RAID 0. I can either get the GRUB rescue prompt at startup, or just a GRUB prompt but I cannot boot to Ubuntu manually. How can I configure the GRUB to actually use the Ubuntu install? The steps taken: Installing Ubuntu on fake raid The Ubuntu installer cannot install Ubuntu on the drive. After defining the partitions to use it fails with "Error: ???", pressing OK terminates the installer. Therefore, I used GParted to configure the partitions: /dev/mapper/sil_agadaccfacbg : (the RAID configuration, created partition): /dev/mapper/sil_agadaccfacbg1:ext2, 200MiB, (with 'boot' flag) /dev/mapper/sil_agadaccfacbg3:ext2, 67.75GiB, (which will contain Ubuntu) /dev/mapper/sil_agadaccfacbg2:extended, 1.00GiB, (for swap) Contains: /dev/mapper/sil_agadaccfacbg5: unknown Because of the fake-RAID, I already mounted the destination partitions before running the Ubuntu installer: > mkdir /mnt/boot > sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot > mkdir /mnt/ubuntu > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu In the installer I chose the following partition usage: /dev/mapper/sil_agadaccfacbg1 ext2, mount at /boot (209MB) /dev/mapper/sil_agadaccfacbg3 ext2, mount at / (72751MB) /dev/mapper/sil_agadaccfacbg5 swap Device for boot loader installation: /dev/mapper/sil_agadaccfacbg, linux device-mapper (striped) (74.0GB) This will install Ubuntu, but will fail to install GRUB (it seems to use /dev/sda no matter which one I choose) Installing GRUB with dpkg-reconfigure I followed this guide, but adapted it for two partitions: sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu sudo mount --bind /dev /mnt/ubuntu/dev sudo mount --bind /proc /mnt/ubuntu/proc sudo mount --bind /sys /mnt/ubuntu/sys sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot sudo mount --bind /boot /mnt/boot sudo chroot /mnt/ubuntu dpkg-reconfigure grub-pc However, it does not ask where to install GRUB (I should choose /dev/mapper/sil_agadaccfacbg somewhere..) After reboot I get the GRUB rescue prompt with message no such device Installing GRUB with grub-install After the same mount commands as above, I continued with: > sudo grub-install --root-directory=/mnt/boot /dev/mapper/sil_agadaccfacbg This gives the following message: /usr/sbin/grub-probe: error: cannot find a device for /mnt/boot/boot/grub (is /dev mounted?) It does succeed when mounting just the boot partition : sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with: Installation finished. No error reported. After reboot I get the GRUB console, with welcome text. Attempting to manually start Ubuntu: ls (hd0) (hd0,msdos3) : (Ubuntu install partition) (hd0,msdos1) : (Ubuntu boot partition) (hd1) (hd1,msdos1) : (Ubuntu live USB) ls (hd0,msdos3)/ contains: - vmlinuz - lib/ - tmp/ - initrd.img - mnt/ - var/ - proc/ - boot/ - root/ - etc/ - run/ - media/ - sbin/ - bin/ - selinux/ - dev/ - srv/ - home/ - sys/ ls (hd0,msdos1)/ contains: -grub/ -boot/ -initrd.img-3.8.0-29-generic -vmlinuz-3.8.0.29-generic -config-3.8 linux (hd0,msdos3)/vmlinuz This returns "error: out of disk" Installing GRUB on Ubuntu partition with grub-install > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt > sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with message: > Installation finished. No error reported. After reboot get the message "error: out of disk" and the GRUB rescue prompt. Configuring GRUB with grub-mkconfig Attempting to run grub-mkconfig with different destinations results in the same message: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Remarks: Initially I didn't use a separate /boot partition, but the GRUB install then also failed. Because some mention that a small partition at the beginning of the drive is necessary on old machines, I retried with a /boot partition This is a single boot (no other OS's installed/used)

  Read the article

• team foundation server 2010 installation from DVD - I get agent installation instead!

  - by Avi

  GRRRRRRRRRRRR!(#Y%)@#!! They bragged they now have a very easy installation! I don't get it. I entered the MSDN "Disk 5000: Developer Tools" DVD, opened default.htm, clicked on the "Visual Studio Team Foundation Server 2010" link. The VSTFS2010 folder open. I click autorun.exe. And then I get "Microsoft Visual Studio Agents 2010 Setup". I don't get it. Why "agents"? I wanted to instal a server!

  Read the article

• Raid1+0: create stripe over two /dev/mdx on partition or not?

  - by Chris

  Given that I haven't found a way to define how a Raid10 is created with mdadm, i went the Raid1+0 solution. How to display/define Mirror/Stripping pairs with mdadm mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sda1 /dev/sdf1 mdadm --create /dev/md1 --level=1 --raid-devices=2 /dev/sdg1 /dev/sdh1 mdadm --create /dev/md10 --level=0 --raid-devices=2 /dev/md0 /dev/md1 My question is about the stripe. For the mirror I create a primary partition over the full HD and set partition type to FD. So, should I do the same for the Stripe? Create partition on /dev/md0 and /dev/md1 (primary over full 'HDD', set partition type correctly) and then do the stripe on the partition? Is there a correct way here or are there any advantages/disadvantages to a solution? Thank you

  Read the article

• Trade-offs of local vs remote development workflows for a web development team

  - by lamp_scaler

  We currently have SVN setup on a remote development server. Developers SSH into the server and develops on their sandbox environment on the server. Each one has a virtual host pointed to their sandbox so they can preview their changes via the web browser by connecting to developer-sandbox1.domain.com. This has worked well so far because the team is small and everyone uses computers with varying specs and OSs. I've heard some web shops are using a workflow that has the developers work off of a VM on their local machine and then finally push changes to the remote server that hosts SVN. The downside to this is that everyone will need to make sure their machine is powerful enough to run both the VM and all their development tools. This would also mean creating images that mirror the server environment (we use CentOS) and have them install it into their VMs. And this would mean creating new images every time there is an update to the server environment. What are some other trade-offs? Ultimately, why did you choose one workflow over the other?

  Read the article

• Connecting to MSP430 via /dev/ttyACM0

  - by speciousfool

  I'd like some suggestions about how to fix garbled serial output from a device connected on /dev/ttyACM0. Lately I've been working on a development project making use of TI's MSP430 microcontroller (specifically the eZ430-RF2560). Over on this thread you can see we've been testing some code and have found that the output of the microcontroller over serial is garbled. The btstack provides simple counter test program. When we run the program and look at the serial port output using PuTTY on Windows 7 we see: rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26230 rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26231 However if we connect from various Ubuntu clients we get something like: Stt.R. BTacn 0 BTacn 002BTacn 0 BTcct 04BTtacoe 5BTacun My current belief is that this is because the device is being detected by cdc_acm as a generic USB ACM device. Another thread about a similar microcontroller suggests that the device should use a specific usb serial driver. We've verified that the module is compiled on our system and did a "modprobe ti_usb_3410_5052" but this had no effect on cdc_acm. Here is the relevant section of the kernel's debug log: [ 2735.092987] usb 2-1.2: new full speed USB device number 5 using ehci_hcd [ 2735.213655] cdc_acm 2-1.2:1.0: This device cannot do calls on its own. It is not a modem. [ 2735.213669] cdc_acm 2-1.2:1.0: No union descriptor, testing for castrated device [ 2735.213720] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device [ 2745.241996] generic-usb 0003:0451:F432.0003: usb_submit_urb(ctrl) failed [ 2745.242023] generic-usb 0003:0451:F432.0003: timeout initializing reports [ 2745.242401] generic-usb 0003:0451:F432.0003: hiddev0,hidraw0: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1d.0-1.2/input1 So, in summary, we'd like to figure out how to properly connect to this device. Also of use may be the appropriate place to file a bug report.

  Read the article

• West Palm Beach Dev Group August 2012 Meeting Recap

  - by Sam Abraham

  As the saying goes, it’s better late than never. Such is the case with my overdue West Palm Beach Dev Group August 2012 meeting report. Our August meeting was full of both knowledge and adventure. It comes as no surprise that the knowledge was brought to us by our favorite DotNetNuke Technical Evangelist, Will Strohl. Will introduced and thoroughly presented the new social features in DNN 6.2. Unfortunately, our meeting date coincided with Hurricane Isaac having just passed us by. Aside from road closures and floods that kept public schools closed for two days, our meeting host, PC Professor, had to close the school the day of our meeting on a short notice due to flooding which we found out about at midnight on the day of the event.  This left us scrambling to find an available alternate meeting location close enough to our original venue. Cancelling the meeting was always an option, but we opted to keep it as the very last resort. Luckily, we were fortunate to find a meeting room at the Hampton Inn only a few minutes away from our original location. Having heard of our challenge, our event sponsor, Applied Innovations, stepped-in and covered the meeting room cost in addition to the food and beverages. We would like to thank our volunteers and sponsors who made that event a success: Jess Coburn, CEO and Cara Pluff, Director of Sales at Applied Innovations, Dave Noderer for suggesting the alternate venue and Venkat Subramanian for his hard work keeping our members informed of the venue change and for being our event photographer.   We look forward to seeing you at our upcoming meetings: -September 25th, 2012 with Jonas Stawski, Microsoft MVP -October 23rd, 2012 with our Microsoft Developer Evangelist, Joe “DevFish” Healy -Ending an exciting year will be our November 27th meeting with Dycom Industries’ Senior Software Developer, Tom Huynh.   All the best, --Sam

  Read the article

• Welcome to the FMW Install and Admin Proactive Team Blog

  - by Daniel Mortimer

  IntroductionWelcome to the Fusion Middleware Install and Administration Proactive Support blog.  This is our first post, so let's begin by introducing ourselves and our mission. Who We AreWe are a small team of support engineers based in Europe.  Our expertise covers all matters related to the installation and administration of Oracle Application Server 10g, Oracle Fusion Middleware 11g and future versions to come. We particularly focus on core components such as the Installers and Configuration Wizards Web Tier ( Oracle HTTP Server ) OPMN Enterprise Manager Console for Application Server as well as general questions / problems relating to patching, maintenance and architecture. Our Mission Improve the customer experience Enable customers to avoid / prevent issues when working with our products Enable faster resolution of problems when they occur Our Activities Enhancement and maintenance of our knowledge base In particular, develop and maintain special content such as the Fusion Middleware Information Centers and Lifecycle Support Advisors Seek continuous improvement of the product documentation Contribute to the Fusion Middleware Support News Moderation of the "Oracle Application Server" support community Participate in the Support Advisor Webcast program Involved in the Lifecycle of diagnostic tools such as RDA and OCM User Acceptance Testing Logging of enhancements and health check ideas Provide feedback to product management / development Logging of product bugs and enhancements Suggest improvements that could be made to web sites like OTN Promote new support documents, tools via channels such as Newsletter and Social Media We hope that this blog will be a two-way communication as we are interested in feedback on what we can improve. Many suggestions we can act on immediately while others may take more time, but all of them will be acknowledged and followed up.Thank you for your time and we look forward to both informing and working with you.Postscript: Many links you will find in our blog entries will require a login to My Oracle Support. For readers who do not have a login, please accept our apologies - when and where possible we will endeavour to ensure the links will supplement rather than replace wording in the blog entries.

  Read the article

• How do I Series: Connecting an Expression Blend Project to Team Foundation Server

  - by Enrique Lima

  I have heard of people wanting and needing to add projects created in Expression Blend to Team Foundation Server. Here is the recipe: 1) Create your project in Expression Blend … click OK 2) Select the option to open your recently created project in Visual Studio. Once that option is selected, your solution will open up in Visual Studio, close Expression Blend at this point. Now, I want to add this project to Source Control … Next, I connect to my TFS environment, and pick the location to save my project Once the project is added, I will get a status window of pending changes for my project, all that we are left to do is to check in those changes. Since we have checked in our project, we can now close Visual Studio, and we will proceed to open Expression Blend again. And select our project we will! We notice some differences from before, just by opening it What differences you say?!? Notice the lock to the right of the item name … And we also get this when we right click … And there we have it, it is a combination of tools to achieve this, but it is well worth it.

  Read the article

• wxCam can't open /dev/dsp

  - by SIJAR

  I try to run wxCam through PulseAudio using the following command: $ padsp -d wxcam Although wxCam started ok, wxCam is been set to use xdiv format to enable sound during recording, but while recording the I get the error: Cannot open /dev/dsp. Video file will be recorded without audio track Please help me in fixing this issue. Below is some debug information: $ padsp -d wxcam Determining video4linux API version... Using video4linux 2 API VIDIOC_ENUM_FRAMESIZES: Invalid argument V4L2_CID_GAMMA is not supported Determining pixel format... pixel format: YUV 4:2:2 (YUYV) Found V4L2_PIX_FMT_YUYV pixel format pixel format: MJPEG Found V4L2_PIX_FMT_MJPEG pixel format --DEBUG: [wxcam] Generating standard Huffman tables for this frame. Corrupt JPEG data: 2 extraneous bytes before marker 0xd2 ... repeats a couple of times ... open of failed: No such file or directory --DEBUG: [wxcam] Generating standard Huffman tables for this frame. Corrupt JPEG data: 2 extraneous bytes before marker 0xd4 ... repeats a couple of times .... /home/sij/Videos/Webcam/video.avi written: 640x480, 1334396 bytes --DEBUG: [wxcam] Generating standard Huffman tables for this frame. Corrupt JPEG data: 2 extraneous bytes before marker 0xd3 ... repeats a couple of times ...

  Read the article

• Best arguments for/against introducing ORM technology into a companies dev process

  - by james

  I have started using ORM technology in the last few years. My first exposure was NHibernate. I then moved onto Linq 2 Sql, and Entity Framework. The issue I have however is, there are some organisations where I have found strong opposition to introducing ORM tools. They usually have a number of reasons: they have a lot of built up SQL skills in the team, and are worried about the underlying SQL that ORM's generate. they have DBA's who like to be able to see the SQL an app uses in order that can review it for best practice. they are worried about performance (some people have "heard" the ORM's aren't as performant but have no real proof themselves - there may well be some truth in this! :). So, I'm looking for the best or most convincing arguments that you have put forward FOR the use of ORM tools. Equally, I would be interested in the against arguments too. Note: this is NOT a discussion over which ORM I should use.

  Read the article

• github team workflow - to fork or not?

  - by aporat

  We're a small team of web developers currently using subversion but soon we're making a switch to github. I'm looking at different types of github workflows, and we're not sure if the whole forking concept in github for each developer is such a good idea for us. If we use forks, I understand each developer will have his own private remote & local repositories. I'm worried it will make pushing changesets hard and too complex. Also, my biggest concern is that it will force each developer to have 2 remotes: origin (which is the remote fork) and an upstream (which is used to "sync" changes from the main repository). Not sure if it's such a easy way to do things. This is similar to the workflow explained here: https://github.com/usm-data-analysis/usm-data-analysis.github.com/wiki/Git-workflow If we don't use forks, we can probably get by fine by using a central repo creating a branch for each task we're working on, and merge them into the development branch on the same repository. It means we won't be able to restrict merging of branches and might be a little messy to have many branches on the central repository. Any suggestions from teams who tried both workflow?

  Read the article

• Microsoft Dev Days &ndash; Johannesburg 2010

  - by MarkPearl

  So I am half way through dev days in Johannesburg. It has been quite an interesting day… Maybe it is me, but this year it hasn’t been as OMG as at previous conferences. A few things that stood out though… 1) This is the first time I have had to queue in a line to use the gents toilets before – yes, a true sign that we are at a typically male dominated industry event in this country – the men’s toilets were jam packed – the ladies if there were any there didn’t have a problem. 2) Bart De Smet presentation still rocks – I am a fan of Bart’s and once again his presentation was great. Something that I am going to look into in more depth which I think is a new feature in .Net is called Code Contracts. 3) I have got to get into Silverlight more… I have known this for a long time and have dabbled in it for a while, but Silverlight in my opinion will become the main platform for “hosting” applications. So… 3 things so far, hopefully I get some OMG’s from the rest of the day…

  Read the article

• Advice: How to convince my newly annointed team lead against writing the code base from scratch

  - by shan23

  I work in a pretty reknowned MNC, and the module that I work in has been assigned to a new "lead". The code base is pretty huge (~130K or more, with inter dependencies on other modules) , but stable - some parts have grown ugly over the years, but its provably in working state. (Our products are running for years on them, even new ones). The problem is, our lead wants to rewrite the code from scratch, to encompass "finer granularity and a proactive design". I know in my guts thats not a very good idea, but how do I convince him/the rest of the team(who are pretty much more senior than me in terms of years of exp), without sounding too pedantic myself (Thou shalt not rewrite , as Joel et al have clear articles prohibiting it)? I have a good working relation with the person concerned, and don't want to ruin it, but neither do I want to be party to a decision which would surely plague us for years to come !! Any suggestions for a milder,yet effective approach ? Even accounts of how you have tackled such a situation to your liking would help me a lot! EDIT: The code base I'm talking about is not a product/GUI, but at kernel level with all the critical functionalities for our product. I hope now you know why i sound so apprehensive !!

  Read the article

• Cannot Connect Modem ( /dev/ttySL0 ) Using gnome-ppp - Dial-Up Connection

  - by nicorellius

  I'm trying to connect my Toshiba Satellite running Ubuntu 10.04 to my Eris running Android 2.1 through a Bluetooth connection and establish a dial-up connection (DUN) with the modem. I can connect my phone to my laptop, and I can detect my modem (after installing drivers), which is located at /dev/ttySL0. But when I launch gnome-ppp and enter my phone number (123 for PDA-Net) I get a dialog that says "Connecting... Sending Password" with Log and Cancel buttons. The log shows this: --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Please enter password (or empty password to stop): --> Configuration does not specify a valid login name. The PDA-Net DUN protocol is running and shows no error. Any ideas? Any help is much appreciated.

  Read the article

• Do you know how to move the Team Foundation Server cache

  - by Martin Hinshelwood

  There are a number of reasons why you may want to change the folder that you store the TFS Cache. It can take up “some” amount of room so moving it to another drive can be beneficial. This is the source control Cache that TFS uses to cache data from the database. Moving the Cache is pretty easy and should allow you to organise your server space a little more efficiently. You may also get a performance improvement (although small) by putting it on another drive.. Create a new directory to store the Cache. e.g. “d:\TfsCache\” Figure: Create a new folder Give the local TFS WPG group full control of the directory   Figure: You need to use the App Tier Service WPG In the application tier web.config (~\Application Tier\Web Services\web.config) add the following setting (to the appSettings section). Figure: The web.config for TFS is stored in the application folder <appsettings> ... <add value="D:\" key="dataDirectory" /> ... </appsettings> Figure: Adding this to the web.config will trigger a restart of the app pool Figure: Your web.config should look something like this The app pool will automatically recycle and Team Web Access will start using the new location.  If you then download a file (not via a proxy) a folder with a GUID should be created immediately in the folder from #1.  If the folder doesn’t appear, then you probably don’t have permissions set up properly.

  Read the article

• Do you know how to move the Team Foundation Server cache

  - by Martin Hinshelwood

  There are a number of reasons why you may want to change the folder that you store the TFS Cache. It can take up “some” amount of room so moving it to another drive can be beneficial. This is the source control Cache that TFS uses to cache data from the database. Moving the Cache is pretty easy and should allow you to organise your server space a little more efficiently. You may also get a performance improvement (although small) by putting it on another drive.. Create a new directory to store the Cache. e.g. “d:\TfsCache\” Give the local TFS WPG group full control of the directory Figure: You need to use the App Tier service WPG In the application tier web.config (~\Application Tier\Web Services\web.config) add the following setting (to the appSettings section). <appsettings> ... <add value="D:\" key="dataDirectory" /> ... </appsettings> The app pool will automatically recycle and Team Web Access will start using the new location.  If you then download a file (not via a proxy) a folder with a GUID should be created immediately in the folder from #1.  If the folder doesn’t appear, then you probably don’t have permissions set up properly.

  Read the article

• team viewer 8 beta wont run

  - by Conner Jones

  I installed team viewer 7 and then one of my friends using windows got version 8 so I installed the beta of version 8 for linux. When I try to run it for terminal I get these errors i atempted to do as the comment bellow said and when trying to run teamveiwer i stil got an error conner@DemonicGrace:~$ teamviewer Init... Checking setup... Launching TeamViewer... wine: cannot find L"C:\windows\system32\winemenubuilder.exe" err:wineboot:ProcessRunKeys Error running cmd L"C:\windows\system32\winemenubuilder.exe -a -r" (2) err:winedevice:ServiceMain driver L"MountMgr" failed to load err:secur32:SECUR32_initSchannelSP libgnutls not found, SSL connections will fail fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:ole:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:process:SetProcessShutdownParameters (00000100, 00000000): partial stub. fixme:resource:GetGuiResources (0xffffffff,0): stub fixme:win:EnumDisplayDevicesW ((null),0,0x32df64,0x00000000), stub! fixme:win:EnumDisplayDevicesW (L"\\.\DISPLAY1",0,0x32dc1c,0x00000000), stub! fixme:win:EnumDisplayDevicesW ((null),1,0x32df64,0x00000000), stub! please help me out if anyone has ideas im more than willing to listen

  Read the article

• Putting Together a Game Design Team?

  - by Kaia

  I'm attempting to put together a game design team that is willing to help me design/program, test, and somewhat produce the game we make to the public. I need anyone who knows anything about programming/coding, designing, etc. Once we get it up and running and out into the world (over dramatic maybe? haha) I have ideas of generating a profit from it so there is a possibility of payment. My thinking on it (so far) is this: 2D (possibly. I haven't decided if I want it 2D or 3D. It really depends on what is easier) 3rd person. Adventure (I want there to be a point to it, but like a point with no real end) I want there to be a story to it. If you've ever played Dofus, think like that. There is a story to the game, but no real end. I want (if possible) to include mini-games. These could end up becoming a possible way for a player to aquire in-game money, quest items, etc. If anyone is interested in helping me create the story line/script (which we will finsih first, before creating the game) please contact me. I want to get this completed as soon as possible.

  Read the article

• github team workflow - to fork or not?

  - by aporat

  We're a small team of web developers currently using subversion but soon we're making a switch to github. I'm looking at different types of github workflows, and we're not sure if the whole forking concept in github for each developer is such a good idea for us. If we use forks, I understand each developer will have his own private remote & local repositories. I'm worried it will make pushing changesets hard and too complex. Also, my biggest concern is that it will force each developer to have 2 remotes: origin (which is the remote fork) and an upstream (which is used to "sync" changes from the main repository). Not sure if it's such a easy way to do things. This is similar to the workflow explained here: https://github.com/usm-data-analysis/usm-data-analysis.github.com/wiki/Git-workflow If we don't use forks, we can probably get by fine by using a central repo creating a branch for each task we're working on, and merge them into the development branch on the same repository. It means we won't be able to restrict merging of branches and might be a little messy to have many branches on the central repository. Any suggestions from teams who tried both workflow?

  Read the article

• Creating an in-house single source software development team

  - by alphadogg

  Our company wants to create a single department for all software development efforts (rather than having software development managed by each business unit). Business units would then "outsource" their software needs to this department. What would you setup as concerns/expectations that must be cleared before doing this? For example: Need agreement between units on how much actual time (FTE) is allocated to each unit Need agreement on scheduling of staff need agreement on request procedure if extra time is required by one party etc... Have you been in a situation like this as a manager of one unit destined to use this? If so, what were problems you experienced? What would you have or did implement? Same if you were the manager of the shared team. Please assume, for discussion, that the people concerned know that you can't swap devs in and out on a whim. I don't want to know the disadvantages of this approach; I know them. I want to anticipate issues and know how to mitigate the fallout.

  Read the article

• Software architecture map to aid cross team communication?

  - by locster

  I work in a company where multiple teams each work on different parts of a software product in a vaguely agile/scrum manner. Mostly the organisation works well but there have been instances where a team may make a change without realising its impact on other teams. Where dependence is known communication has been good, and where dependence is suspected then 'broadcast' emails and informal conversations have also worked well. But there exists a sub-set of tasks that fall between the cracks. Broadcast emails are likely not the solution as they would become too numerous such that the email signal/noise ratio would fall. I'm contemplating a solution that involves a sort of map of the software, which details all of the various parts of the system and loosely tries to place interacting and dependent parts near to each other. Each developer then updates their position on the map (today I'm working on X and Y), and therefore if two or more developers happen to be co-located (or proximate) on the map then we can see this each day and this could form the trigger for further discussion on possible overlap and conflict. Is such a method out there and in use? If so what is it and does it work? Otherwise, do you think such a scheme has merit?

  Read the article

• raid md device is not remove from memory, how to overcome this problem

  - by santhosha

  i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

  Read the article

• Share code between projects in tfs 2010

  - by Jimmy Engtröm

  Hi What is the best way to handle code sharing in TFS 2010? We have a couple of Visual studio projects that other Visual Studio projects use. ex: Shared Project Project 1 Solution -Shared Project -Project 1 Project Project 2 Solution -Shared Project -Project 2 Project Also we have Third party code for example: Third Party -Telerik --2009.1.402.35 --2009.02.0701.35 When I open my "Project 1" solution i want my shared code project to be included in that solution. (thats the way we work today). We basically have one TFS Project that contains all the code. Now we want to use it the "right" (?) way, We would like to have Project 1 and 2 in separate TFS solutions. If I for example makes sure we have all our project in the same structure on disk and just add the shared project to my Project 1 solution (even if the projects reside in two different TFS Projects) would that work with builds? How have you solved the problem, I guess we are not the only ones having shared code between projects? Cheers /Jimmy

  Read the article

• Roll up project-level tasks to the project collection portal in TFS2010

  - by adam.mokan

  I have a Project Collection setup in my TFS2010RC deployment. I have two Projects setup under this collection with their own task lists, which are populated with data. I fully expected the tasks from these individual projects to "roll up" and appear in the task list at the Project Collection level, but they do not. The Project Collection task list is empty. Basically, I'm looking to provide a view so a supervisor could see all tasks across projects quickly and easily. I'm sure I could write a reporting services report, but it seems like this is something so basic that it would have been included and it just need to be turned on or something. I'm sure I'm probably missing something really simple here. Thanks.

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >