Search Results

Search found 61369 results on 2455 pages for 'simulation help'.

Page 19/2455 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

  • Need help with exploring a USB drive

    - by Bob Getsla
    When I plug in a USB drive, I see it on the left hand edge of the Unity desktop (11.10, 64 bit) but when I try to explore it, VLC starts and tries to play whatever it can find in the USB drive. This behavior began when I updated from 11.04 to 11.10. I literally cannot look into the contents of any of the USB drives I have, because I cannot stop VLC, nor can I do anything when I click Open other than watch VLC start up. This is very frustrating because it makes my USB sticks essentially useless. HELP! I'm sure that there is something a wizard could do about this, but I am not a wizard, and I am at my wits ends. Trying to get to the System Settings menu works, and I can see the setup for "Removable" devices, and they are all set to "Ask" but that is clearly not what is happening. So it looks like I must reach for the command line, but where do I go to find the settings for what the desktop does when I plug in a USB drive and wish to explore the file structure in it and possible copy a file into the USB or from the USB drive. Right now, VLC media player is always getting in my way. :-(

    Read the article

  • Help Creating a Google Analytics Funnel for Check out process

    - by Drew
    have a funnel question. I am currently working on tracking (through GA) guest and logged in member activity once they get to my sites shopping cart. But need help with setting up funnels. Specifically to see; Total sales Logged in member total sales List item Guest member sales The urls associated to the check out proces are: Logged in members /cart (arriving to checkout) /checkout (checking out as a logged in member) /checkout/confirmation (thank you - confirmed sale) Guest members - /cart (arriving to checkout) - /checkout-guest (checking out as a guest) - /checkout/confirmation (thanks you - confirmed sale) I've tested the funnels set up for the above with 9 transactions. But the end maths doesn't seem to line up. Total sales funnel shows 9 completed transactions when only tracking these to urls: - /cart - /checkout/confirmation Which is great - cause it's working Logged in member sales show a total of 9 completed transactions based on each step of the logged in url steps (above) being tracked in a funnel. Not good because this number should be 3. Guest check out funnel (see guest steps above) shows 9 as well. What the?!?!?!? The results I am looking for should reflect the following - total sales = 9, logged in members = 3, guest members = 6 Is there any way to set these urls up so that the funnels report the correct results - or do I need to changed the urls and provide logged in members and guest stand alone purchase confirmation pages (this would mean I can not track total sales which combine results from both streams)? Any knowledge in this area is welcome. Thanks.

    Read the article

  • SEO Keyword Research Help

    - by user5857
    I'm new at SEO and keyword research. I am using Market Samurai as my research tool, and I was wondering if I could ask for your help to identify the best key word to target for my niche. I do plan on incorporating all of them into my site, but I wanted to start with one. If you could give me your input on these keywords, I would appreciate it. This is all new to me :) I'm too new to post pictures, but here are my keywords (Searches, SEO Traffic, and SEO Value / Day): Searches | SEO Traffic | PBR | SEO Value | Average PR/Backlinks of Current Top 10 1: 730 | 307 | 20% | 2311.33 | 1.9 / 7k-60k 2: 325 | 137 | 24% | 822.94 | 2.3 / 7k-60k 3: 398 | 167 | 82% | 589.79 | 1.6 / 7k-60k I'm wondering if the PBR (Phrase-to-broad) value of #1 is too low. It seems like the best value because the SEOV is crazy high. That is like $70k a month. #3 has the highest PBR, but also the lowest SEOV. #2 doesn't seem worth it because of the PR competetion. Might be a little too hard to get into the top page of Google. I'm wondering which keywords to target, and if I should be looking at any other metric to see if this is a profitable niche to jump into. Thanks.

    Read the article

  • Need help installing the Intel VGA Driver [closed]

    - by Ary Catur Wicaksono
    Possible Duplicate: How do I install the Intel Graphics driver in my system? how to install intel VGA drive..?? I've been searching on google but did not see too I've been trying to ask the ubuntu forum in Indonesia. but they did not reply my post.. is there anything that can help me? *I am sorry my English is rather chaotic arthur@Chunx:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) arthur@Chunx:~$ sudo lshw -c display [sudo] password for arthur: *-display description: VGA compatible controller product: 82G33/G31 Express Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 10 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:42 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff arthur@Chunx:~$ sudo apt-get install xserver-xorg-video-intel Sedang membaca daftar paket... Selesai Membangun pohon ketergantungan Membaca informasi yang tersedia... Selesai xserver-xorg-video-intel telah berada dalam versi terbaru. 0 dimutakhirkan, 0 baru terinstal, 0 akan dihapus dan 190 tidak akan dimutakhirkan.

    Read the article

  • Ping Access to a Nested VM !! Plz Help

    - by Shivaramakrishnan
    I have a problem in communication between the host and the nested VM.This is my layout. I have installed KVM on host machine having a single nic interface (public ip) running Ubuntu.On top of this,I have VM running Ubuntu.I have installed KVM in this VM too.I then have a VM inside this running a web server. I am able to ping the host from this web server VM and ssh into it.But from host to VM ,ping is being unsuccessful. The VM (named L1hyp) on host was created using libvirt-manager and has IP of 192.168.122.8. The vswitch interface created at host is in default config (NAT-ed). Its IP is 192.168.122.1. Now this VM is also having a vswitch interface which is in default config (NAT-ed).Its IP is 192.168.100.1. The Web server VM is created on top of this L1hyp VM, is having an IP of 192.168.100.186. The Webserver VM uses 192.168.100.1 as its default gw. The L1hyp uses 192.168.122.1 as its default gw. From Host: ping 192.168.122.8 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS ping 192.168.100.1 - SUCCEEDS ping 192.168.100.186 - FAILS Comes up with Destination Host Unreachable From 192.168.122.1. But there is route to 192.168.100.0/24 subnet from host.Ping to 192.168.100.1 succeeds. From Webserver VM: ping 192.168.100.1 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS SSH from web server VM to host succeeds. Can anyone help me out what needs to be modified to have two way communication between the host and Webserver VM at the earliest? I am pondering over this problem for over a week now.

    Read the article

  • Help with the RT3290 Wireless adapter

    - by Potek
    I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

    Read the article

  • help download and install and save and use my wireless stick modem and software

    - by ADAM
    i installed Linux Ubuntu after my win os went totally dead by fatal blue screen. cannot reboot or install form CD ROM or get safe mode i installed Linux Ubuntu i still unable to install my wireless stick usb modem to connect and surf the Internet wireless form my provider. i use wireless network from neighborhood And i find it difficult to download and install and save porg and application from the INTERNET like skype and real player and others. it is different form windows and not that easy to use. i click to download for example and find real player but when click on it it opens as text file only and i cannot use it as it should be used for video and download and record from you tube. how to do it. and is there with Linux Ubuntu similar prog to download and record and save from you tube as in windows? Is there any trick to restart or reboot windows OS from the dead. can i use linux to reboot windows or to import my files from the blue screen stopped windows7? Any help is highly appreciated. thanks please email me to : [email protected]

    Read the article

  • How to help FGLRX detect a device

    - by user113416
    I have HD 4850 card, Ubuntu 12.10 and installed legacy drivers using makson96 ppa. The issue is, that FGLRX can not detect my device and loads vesa bios. I had the same problem on ubuntu 11.10, 12.04 versions. I want to manually help fglrx find a matching device to load as it shoudld do. It is interesting, why does fglrx search for a device in a PCI:0@1:0:1 Bus? in xorg.cof different bus is indicated: Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 4800 Series OpenGL version string: 3.3.11653 Compatibility Profile Context Here is a part of my xorg log: [ 3.846] (II) VESA: driver for VESA chipsets: vesa [ 3.846] (II) FBDEV: driver for framebuffer: fbdev [ 3.846] (++) using VT number 7 [ 3.846] (WW) Falling back to old probe method for fglrx [ 3.883] (II) Loading PCS database from /etc/ati/amdpcsdb [ 3.883] (--) Assigning device section with no busID to primary device [ 3.883] (--) Chipset Supported AMD Graphics Processor (0x9442) found [ 3.884] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 3.884] (II) AMD Video driver is running on a device belonging to a group targeted for this release [ 3.884] (II) AMD Video driver is signed [ 3.884] (II) fglrx(0): pEnt->device->identifier=0xb7791d8f [ 3.884] (WW) Falling back to old probe method for vesa [ 3.884] (WW) Falling back to old probe method for fbdev Thanks in advance.

    Read the article

  • Yelp, Google's API for restaurants help

    - by chris
    Ok I have looked into this, and I'm not sure if anyone else has experience with it. I'm having termendous difficulties with Yelp and Google's API. To help explain what I am trying to do here is the concept of the website. We would have to pull restaurants based on user distance, and then randomize them based on quality of restaurant based on feedback from review websites (Yelp, Google, urbanspoon, zagat, opentable, kudzu, yahoo - doesn't have to be from all), and feedback from our users (on results page for the random restaurant users can select good recommendation/bad recommendation). There’s a lot we could calculate for our formula. Things that will dictate your results will be based on if you’re at home or work. If you’re at home you will have more time to drive out to the city to grab some dinner or lunch. If you’re at work we would have to recommend restaurants nearby as lunch is typically 30 minutes to a hour. A 30 minute lunch would require take out most likely or quick service. A hour lunch break you could dine in at a local fine dining restaurant. So in a nutshell, user comes to website. Select if they're at home or work, click submit and we will have a random restaurant selected for them to go. If they don't like it they can click retry and a new restaurant can show. The issue I am having is using the API to gather all the restaurants in the US. I know it can be done because there are similiar websites/apps that pull restaurants that are closest to you such as Ness, Alfred, and I believe there's two more but I can't remember the names. Anyone know if this can be accomplish?

    Read the article

  • Help me with this logic (newbie) [migrated]

    - by Surendra
    I need to generate a half pyramid number series with the entered starting number and the number of lines in a html page using Javascript and show the result in html page . I have done the Java scripting and stuff . What I don't get is the logic to it. Take a look at this you may get an idea what I'm talking about: Here is my function in Javascript that will be triggered on a button click function doFunction(){ var enteredNumber=document.getElementById("start"); var lines=document.getElementById("lines"); var result; for(i=0;i<=lines.value;i++) { for(j=enteredNumber.value;j<=i;j++) { document.write(j + "&nbsp;" + "&nbsp;"); } document.write("<br />"); } } Help me with the logic to print following order: 1 1 2 1 2 3 1 2 3 4 1 2 3 4 5 There is a condition. I will specify $start and $lines. If $start = 5 and $lines = 3 then output should be like: 5 5 6 5 6 7 I have had used the for loop , but that doesn't work if I give my own start number that is higher than the number of lines. I actually need it done with Javascript, I have had done the necessary but I'm confused with the logic to generate such series (with the user given values) I had actually used two for loops to generate the regular number series like below 1 1 2 1 2 3 and so on.

    Read the article

  • I need help with Grub and restoring Windows?

    - by Bob Tahog
    I started out with Windows XP and then I installed Zorin (a sub distro of Ubuntu) and then I installed Ubuntu. This was working great. Then I installed Windows 8 on yet another partition and couldn't get into my other OSs. I asked my tech teacher at school how to fix it and she said just clear the partition that I installed Windows 8 on, so I booted onto a live version of Ubuntu and cleared the Windows 8 partition. Okay then I rebooted and it still went into Windows 8 for some reason. So I got back onto live Ubuntu and it turns out Windows 8 partition didn't clear for some reason so I did it again (and I'm positive it was the Windows 8 partition). I still couldn't fix grub but I needed something out of my XP partition so I mounted it on the live Ubuntu and now all the XP partition have are the folders 'Boot', 'Recovery', 'System Volume Information', 'temp' and the files 'bootmgr', 'BOOTNXT', 'BOOTSECT.BAK' and 'Recovery.txt'. Anybody know how to fix this or what I did wrong? Also, if I try booting from my hard drive it shows the Windows and says 'preparing automatic repair' then 'Diagnosing your PC' then restarts. Any and all help is greatly appreciated.

    Read the article

  • help with yes/no radio button for multiple questions pull from database

    - by Darlene
    hey guys i need a little help with this questionaire form. The tables currently using are: user userid| username answers aswerid|quesid|ans|userid|date ques quesid|ques The form below is what im using however i'm gettin errors for radio button.... could anyone offer advice? $query = mysql_query("SELECT * FROM ques", $con) or die("Cannot Access tblprequeations From Server"); echo"<div id='quesform' class='quesform'>"; echo"<form name='QForm' method='post' action='answers.php' onsubmit='return validateQForm(this);'>"; echo"<p>"; while($row = mysql_fetch_array($query)) { echo"<p>"; echo"<label>".$row['quesid']."</label>&nbsp; &nbsp;"; echo"<label>".$row['ques']."</label>&nbsp; &nbsp;"; echo"<input type='radio' name='ans' value='yes' if (isset($_POST['ans']) && $_POST['ans'] == 'yes') echo'checked'/>"; echo"<input type='radio' name='ans' value='no' if (isset($_POST['ans']) && $_POST['ans'] == 'no') echo'checked'/>"; echo"</p>"; } echo"</p>";

    Read the article

  • Help with collision detection method [on hold]

    - by derek jones
    I was wondering if any of you could spare me some time to go over some collision detection on my platform engine. i tried XNA a few years back but for reasons i wont go into online could not continue, my health is now at a state where i am ready to try again but due to my current circumstances (and age) schooling is out of the question so i turn to you guys for help. Whilst i can adapt the MS sample ok and have some great features, you will agree modifying code is not really learning. So i have spent the last couple of week going over my old MS code and lots of stuff online and decided on what i want and have ported most of it over to code that i understand 90% of. I have my player class that moves about, jumps with gravity, has animations and a bounding box that follows it around. I have my map & basic level class to load levels from text files. Its just how i handle the collisions that i am struggling with as i will want per pixel collision on some tiles(i have code for this in a pong game i made so that should be ok). I'm pretty clear in my mind on what i need to do its just putting it in code and in the right place, here's what i was thinking. I was going to do it all in layers, have a tile layer, a collision layer & an item layer this way i could make a nice map editor in Win Forms at some point. Anyway i need to read in the collision layer the assign each tile a rectangle and collision property, and this is where i get me. Would any of you be able to spare some time and go over this with me ? I will post some code later Regards Del

    Read the article

  • Need help for array when no checkbox is selected [closed]

    - by darlene
    Hi guys I have created a form that has checkboxes, the code works great when a checkbox is selcted however when no checkboxes are selected I get errors such as "Undefined index: onemon in and Warning: Invalid argument supplied for foreach()" Please help:) FORM 1. Had a cold, fever or headache? input type="checkbox" name="onemon[]" value="q1" if(isset($_GET['onemon']) && $_GET['onemon']= "q1") 2. Had dental extractions or teeth cleaning? input type="checkbox" name="onemon[]" value="q2" if(isset($_GET['onemon']) && $_GET['onemon']= "q2") 3. Had minor outpatient sugery? input type="checkbox" name="onemon[]" value="q3" if(isset($_GET['onemon']) && $_GET['onemon']= "q3") 4. Had any vaccines? input type="checkbox" name="onemon[]" value="q4" if(isset($_GET['onemon']) && $_GET['onemon']= "q4") PHP $date = date('Y-m-d'); $onemon = $_POST ['onemon']; { $con = mysql_connect("localhost","root","") or die ("Could not connect to DB Server"); $db_selected = mysql_select_db("nbtsdb", $con) or die("Could not locate the DB"); // You have to loop through the array of checked box values ... $ques=""; foreach($onemon as $entry){ $ques .= $entry.","; } //$addPersonalSql holds the insert SQL query string $query = "INSERT INTO defferal(defid, intdate, onemonth) VALUES('','$date','$ques')"; $addMemberSql = $query or die ("Unable to Insert Data into defferal Table"); mysql_query($addMemberSql); }

    Read the article

  • pls help to log back in to FB with an existing profile [closed]

    - by Katalin Glegyák
    Dear to Whom it may concern on Facebook, My name is Katalin Glegyák. I have had an account with an email: [email protected], even though I do not use that email anymore. Someone wanted to hack my account, so I changed password to a pretty complicated one, which I could not remember..(I know:)) I needed to prove my identity by typing in 3 codes that were sent to 3 friends on fb. I did it. Fb told me to come back in one day. I did so. But this is the message I keep getting: "We're sorry. The email you used to start the account recovery process is already in use. Please restart the process with a new email address.". I really do not want to log back in again with a new subscribtion. I already have 600 ppl who I know from places, and I have certain important messages also...Pls pls..help me..... Thank you very much, Merry Xmas, Kate Glegyák ([email protected])

    Read the article

  • Disable the user of Internet explorer through policies when called from HTML help

    - by Stephane
    Hello, I have a locked down environment where users are prohibited from doing, well, basically anything but run the specific programs we specify. We just switched a program from using the venerable "WinHELP" help format to HTML help (CHM) but that seem to have an unwanted and rather dangerous side effect: when a user click on a hyperlink inside the HTML help, a new internet explorer window is opened and the user is free to browse and do terrible things to my server (well, not that much, but still...) I have checked the session in this case and the IE window is actually hosted within the help engine: there is no iexplore.exe process running in the user session (and it cannot: it's explicitly prohibited). We have disable all help right now until we find a solution. I'm working with the help team to have all external URLs removed from the help file but that is going to be a long and error-prone task. Meanwhile, I've checked all the group policies option but I have to say that I was unable to find anything that would prevent a standalone IE window hosted in a random process from running. I don't want to disable WinHTTP or the IE rendering engine or anything of the sort. But I need to prevent all users members of a specific AD user group from ever having an IE window displayed to them. The servers are running Windows 2003 and Citrix metaframe 4.5. Thanks in advance

    Read the article

  • Need help fixing a strange path error in bash

    - by Evan
    UPDATE Ok, I found some errors in the path which I think I fixed, but now it's not running in any case - which for some reason I think is a step forward. Thanks for suggesting the following steps, here is their output: user@computer:~$ echo $PATH /usr/share/fsl/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/matlab/bin:/usr/local/VoxBo/bin:/usr/local/itt/idl64/bin:/usr/local/afni/bin/:/usr/local/mricron:/usr/lib/voxbo/bin:/home/user/folder:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11/:/usr/games/:/usr/local/matlab/bin:/usr/local/VoxBo/bin/:/usr/local/itt/idl64/bin:/usr/local/afni/bin/:/usr/local/mricron/ user@computer:~$ typeset -p PATH declare -x PATH="/usr/share/fsl/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/matlab/bin:/usr/local/VoxBo/bin:/usr/local/itt/idl64/bin:/usr/local/afni/bin/:/usr/local/mricron:/usr/lib/voxbo/bin:/home/user/folder:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11/:/usr/games/:/usr/local/matlab/bin:/usr/local/VoxBo/bin/:/usr/local/itt/idl64/bin:/usr/local/afni/bin/:/usr/local/mricron/" user@computer:~$ type app1 app1 is /home/user/folder/app1 user@computer:~$ type app2 app2 is /home/user/folder/app2 user@computer:~$ app1 bash: /home/user/folder/app1: No such file or directory user@computer:~$ app2 bash: /home/user/folder/app2: No such file or directory user@computer:~$ /home/user/folder/app1 bash: /home/user/folder/app1: No such file or directory user@computer:~$ /home/user/folder/app2 bash: /home/user/folder/app2: No such file or directory user@computer:~$ cd /home/user/folder user@computer:~/folder$ app1 bash: /home/user/folder/app1: No such file or directory user@computer:~/folder$ ./app1 bash: ./app1: No such file or directory user@computer:~/folder$ ./app2 bash: ./app2: No such file or directory user@computer:~/folder$ ls -l total 29384 -rwxr-xr-x 1 user user 14949776 2011-02-03 11:09 app1 -rwxr-xr-x 1 user user 15137300 2011-02-03 11:10 app2 user@computer:~/folder$ Thanks for everyone's input! ORIGINAL QUESTION I have two executable files I downloaded and am trying to add to the path. They are located in /home/user/folder and the specific files are /home/user/folder/app1 /home/user/folder/app2 Both app1 and app2 have the executable flag set to all (user, group, other). I can execute the files if I am in /home/user/folder and I execute these commands ./app1 ./app2 However I can't run them from elsewhere. I added this line to my .profile PATH="$PATH:/home/user/folder" and then sourced the path with . /home/user/.profile and I can see app1 and app2 when I use command completion (pressing tab). However here is what happens when I try to run app1 or app2 with the following commands (the following only shows 'app1' but the same is true of 'app2') user@comp:~$ app1 -bash: app1: command not found user@comp:~$ /home/user/folder/app1 -bash: app1: command not found user@comp:~/folder$ ./app1 (program runs) I'm stumped :), I must have missed something simple. Thanks for your help!!

    Read the article

  • DMV {dm_os_ring_buffers} - Queries to help pinpoint current Issues / usual usage patterns

    - by NeilHambly
    I'm been running some queries (below) to help me identify when I have had time-sensitive performance issues around Memory/CPU, I didn't want to load up additional overhead to the system (unless absolutely neccessary) using traces or profiler  - naturally we have various methods to do this Perfmon counters, DBCC, DMVs etc.. One quick way I like is to run a few DMV queries (normally back in seconds) to help me find those RECENT specific time periods when the system has been substantially changed in some way using, this is using the DMV dm_os_ring_buffers This one helps me identify when I'm expericing Timeout Errors (1222).. modiy code to look for other error as highlight belowDECLARE @ts_now BIGINT,@dt_max BIGINT, @dt_min BIGINT  SELECT @ts_now = cpu_ticks / CONVERT(FLOAT, cpu_ticks_in_ms) FROM sys.dm_os_sys_info SELECT @dt_max = MAX(timestamp), @dt_min = MIN(timestamp)    FROM sys.dm_os_ring_buffers WHERE ring_buffer_type = N'RING_BUFFER_EXCEPTION'  SELECT       record_id      ,DATEADD(ms, -1 * (@ts_now - [timestamp]), GETDATE()) AS EventTime      ,y.Error      ,UserDefined      ,b.description as NormalizedText FROM       (       SELECT       record.value('(./Record/@id)[1]', 'int')                    AS record_id,       record.value('(./Record/Exception/Error)[1]', 'int')        AS Error,       record.value('(./Record/Exception/UserDefined)[1]', 'int')  AS UserDefined,      TIMESTAMP       FROM             (             SELECT TIMESTAMP, CONVERT(XML, record) AS record             FROM sys.dm_os_ring_buffers             WHERE ring_buffer_type = N'RING_BUFFER_EXCEPTION'             AND record LIKE '% %'            ) AS x      ) AS y INNER JOIN sys.sysmessages b on y.Error = b.error WHERE b.msglangid = 1033 and  y.Error = 1222 ORDER BY record_id DESC Sample Output record_id EventTime Error UserDefined NormalizedText 15199195 18/03/2010 14:00 1222 0 Lock request time out period exceeded. 15199194 18/03/2010 14:00 1222 0 Lock request time out period exceeded. 15199193 18/03/2010 14:00 1222 0 Lock request time out period exceeded. 15199192 18/03/2010 14:00 1222 0 Lock request time out period exceeded. 15199191 18/03/2010 14:00 1222 0 Lock request time out period exceeded.  This one helps me identify when I have Unusally High Processing (> 50%) or # Page-FaultsSELECT record.value('(./Record/@id)[1]', 'int') AS record_id,record.value('(./Record/SchedulerMonitorEvent/SystemHealth/SystemIdle)[1]', 'int')              AS SystemIdle,record.value('(./Record/SchedulerMonitorEvent/SystemHealth/ProcessUtilization)[1]', 'int')      AS SQLProcessUtilization,record.value('(./Record/SchedulerMonitorEvent/SystemHealth/UserModeTime)[1]', 'bigint')         AS UserModeTime,record.value('(./Record/SchedulerMonitorEvent/SystemHealth/KernelModeTime)[1]', 'bigint')       AS KernelModeTime,record.value('(./Record/SchedulerMonitorEvent/SystemHealth/PageFaults)[1]', 'bigint')           AS PageFaults,record.value('(./Record/SchedulerMonitorEvent/SystemHealth/WorkingSetDelta)[1]', 'bigint')      AS WorkingSetDelta,record.value('(./Record/SchedulerMonitorEvent/SystemHealth/MemoryUtilization)[1]', 'int')       AS MemoryUtilization,TIMESTAMPFROM (        SELECT TIMESTAMP, CONVERT(XML, record) AS record         FROM sys.dm_os_ring_buffers         WHERE ring_buffer_type = N'RING_BUFFER_SCHEDULER_MONITOR'        AND record LIKE '% %'         ) AS x Example: Showing entries > 50% SQL CPU record_id SystemIdle SQLProcessUtilization UserModeTime KernelModeTime PageFaults WorkingSetDelta MemoryUtilization TIMESTAMP 111916 66 29 36718750 1374843750 21333 -40960 100 7991061289 111917 54 41 50156250 1954062500 26914 -28672 100 7991121290 111918 57 39 42968750 1838437500 30096 20480 100 7991181290 111919 41 53 43906250 2530156250 22088 -4096 100 7991241307 111920 48 45 40937500 2124062500 26395 8192 100 7991301310 111921 52 43 35625000 2052812500 21996 155648 100 7991361311 111922 40 55 36875000 2637343750 33355 -262144 100 7991421311 111923 36 58 44843750 2786562500 47019 28672 100 7991481311 111924 31 64 53437500 3046562500 31027 61440 100 7991541314 111925 36 57 43906250 2711250000 37074 -8192 100 7991601317 111926 52 43 43437500 2060156250 29176 20480 100 7991661318 111927 71 24 33750000 1141250000 14478 16384 100 7991721320 111928 71 23 34531250 1116250000 12711 -20480 100 7991781320 111929 53 36 46562500 1714062500 26684 200704 100 7991841323 Finally one to provide some understanding of the level of memory state changes that are ocuringSELECT record.value('(./Record/@id)[1]', 'int')                                                       AS 'record_id',record.value('(./Record/ResourceMonitor/Notification)[1]', 'VARCHAR(100)')                     AS 'ReservedMemory',record.value('(./Record/ResourceMonitor/Indicators)[1]', 'int')                                AS 'Indicators',record.value('(./Record/ResourceMonitor/Effect/@state)[1]', 'VARCHAR(100)')         + ' - ' + record.value('(./Record/ResourceMonitor/Effect/@reversed)[1]', 'VARCHAR(100)')      + ' - ' + record.value('(./Record/ResourceMonitor/Effect)[1]', 'VARCHAR(100)')                           AS 'APPLY-HIGHPM',record.value('(./Record/ResourceMonitor/Effect/@state)[2]', 'VARCHAR(100)')         + ' - ' + record.value('(./Record/ResourceMonitor/Effect/@reversed)[2]', 'VARCHAR(100)')      + ' - ' + record.value('(./Record/ResourceMonitor/Effect)[2]', 'VARCHAR(100)')                           AS 'APPLY-HIGHPM',record.value('(./Record/ResourceMonitor/Effect/@state)[3]', 'VARCHAR(100)')         + ' - ' + record.value('(./Record/ResourceMonitor/Effect/@reversed)[3]', 'VARCHAR(100)')      + ' - ' + record.value('(./Record/ResourceMonitor/Effect)[3]', 'VARCHAR(100)')                           AS 'REVERT_HIGHPM',record.value('(./Record/MemoryNode/ReservedMemory)[1]', 'int')                                 AS 'ReservedMemory',record.value('(./Record/MemoryNode/CommittedMemory)[1]', 'int')                                AS 'CommittedMemory',record.value('(./Record/MemoryNode/SharedMemory)[1]', 'int')                                   AS 'SharedMemory',record.value('(./Record/MemoryNode/AWEMemory)[1]', 'int')                                      AS 'AWEMemory',record.value('(./Record/MemoryNode/SinglePagesMemory)[1]', 'int')                              AS 'SinglePagesMemory',record.value('(./Record/MemoryNode/CachedMemory)[1]', 'int')                                   AS 'CachedMemory',record.value('(./Record/MemoryRecord/MemoryUtilization)[1]', 'int')                            AS 'MemoryUtilization',record.value('(./Record/MemoryRecord/TotalPhysicalMemory)[1]', 'int')                          AS 'TotalPhysicalMemory',record.value('(./Record/MemoryRecord/AvailablePhysicalMemory)[1]', 'int')                      AS 'AvailablePhysicalMemory',record.value('(./Record/MemoryRecord/TotalPageFile)[1]', 'int')                                AS 'TotalPageFile',record.value('(./Record/MemoryRecord/AvailablePageFile)[1]', 'int')                            AS 'AvailablePageFile',record.value('(./Record/MemoryRecord/TotalVirtualAddressSpace)[1]', 'bigint')                  AS 'TotalVirtualAddressSpace',record.value('(./Record/MemoryRecord/AvailableVirtualAddressSpace)[1]', 'bigint')              AS 'AvailableVirtualAddressSpace',record.value('(./Record/MemoryRecord/AvailableExtendedVirtualAddressSpace)[1]', 'bigint')      AS 'AvailableExtendedVirtualAddressSpace', TIMESTAMPFROM (        SELECT TIMESTAMP, CONVERT(XML, record) AS record         FROM sys.dm_os_ring_buffers         WHERE ring_buffer_type = N'RING_BUFFER_RESOURCE_MONITOR'        AND record LIKE '% %'        ) AS x  

    Read the article

  • Please help me give this principle a name

    - by Brent Arias
    As a designer, I like providing interfaces that cater to a power/simplicity balance. For example, I think the LINQ designers followed that principle because they offered both dot-notation and query-notation. The first is more powerful, but the second is easier to read and follow. If you disagree with my assessment of LINQ, please try to see my point anyway; LINQ was just an example, my post is not about LINQ. I call this principle "dial-able power". But I'd like to know what other people call it. Certainly some will say "KISS" is the common term. But I see KISS as a superset, or a "consumerism" practice. Using LINQ as my example again, in my view, a team of programmers who always try to use query notation over dot-notation are practicing KISS. Thus the LINQ designers practiced "dial-able power", whereas the LINQ consumers practice KISS. The two make beautiful music together. I'll give another example. Imagine a C# logging tool that has two signatures allowing two uses: void Write(string message); void Write(Func<string> messageCallback); The purpose of the two signatures is to fulfill these needs: //Every-day "simple" usage, nothing special. myLogger.Write("Something Happened" + error.ToString() ); //This is performance critical, do not call ToString() if logging is //disabled. myLogger.Write( () => { "Something Happened" + error.ToString() }); Having these overloads represents "dial-able power," because the consumer has the choice of a simple interface or a powerful interface. A KISS-loving consumer will use the simpler signature most of the time, and will allow the "busy" looking signature when the power is needed. This also helps self-documentation, because usage of the powerful signature tells the reader that the code is performance critical. If the logger had only the powerful signature, then there would be no "dial-able power." So this comes full-circle. I'm happy to keep my own "dial-able power" coinage if none yet exists, but I can't help think I'm missing an obvious designation for this practice. p.s. Another example that is related, but is not the same as "dial-able power", is Scott Meyer's principle "make interfaces easy to use correctly, and hard to use incorrectly."

    Read the article

  • Oracle Joins XBRL US To Help Drive Adoption

    - by Theresa Hickman
    Recently, Oracle joined XBRL US, the national consortium for XML business reporting standards to stay ahead of the technology and help increase XBRL adoption by U.S. companies by 2011. Large accelerated filers were mandated to use XBRL starting in 2009; other large filers started in 2010 and all other public companies must comply in June 2011. Here is a list of other organizations that recently joined XBRL US: Oracle Citi Federal Filings LLC Edgar Agents LLC XSP For those of you who have been living under a rock, XBRL stands for eXtensible Business Reporting Language. Simply put, it's reporting electronically. Just like PDFs or spreadsheets are a type of output, XBRL is another output option in electronic form. Right now, the transition to XBRL means extra work for publicly traded companies because they need to file their financial statements in both EDGAR and XBRL formats. Once the SEC phases out the EDGAR system, XBRL will be the primary way to deliver financial information with footnotes and supporting schedules to multiple audiences without having to re-key or reformat the information. A single XBRL document can be converted to printed output, published via the Web, fed into an SEC database (e.g. EDGAR) or forwarded to a creditor for analysis. Question: How does Oracle support XBRL reporting? Answer: The latest XBRL 2.1 specifications are supported by Oracle Hyperion Disclosure Management, which is part of Oracle's Hyperion Financial Close Suite along with Hyperion Financial Management, Hyperion Financial Data Quality Management and Hyperion Financial Close Management. Hyperion Disclosure Management supports the authoring of financial filings in Microsoft Office, with "hot links" to reports and data stored in Hyperion Financial Management or Oracle Essbase. It supports the XBRL tagging of financial statements as well as the disclosures and footnotes within your 10K and 10Q filings. Because many of our customers use Hyperion Financial Management (HFM) for their consolidation needs, they simply generate XBRL statements from their consolidated financial results. Question: What if you don't use Hyperion Financial Management, and you only use E-Business Suite General Ledger or PeopleSoft General Ledger? Answer: No problem, all you need is Hyperion Disclosure Management to generate XBRL from your general ledger. Here are the steps: Upload the XBRL taxonomy from the SEC or XBRL website into Hyperion Disclosure Management. Publish your financial statements out of general ledger to Excel. Perform the XBRL tag mapping from the Excel output to Hyperion Disclosure Management. For more information and some interesting background on XBRL, I recommend reading What You Need To Know About XBRL written by our EPM expert, John O'Rourke.

    Read the article

  • Help with this optimization

    - by Milo
    Here is what I do: I have bitmaps which I draw into another bitmap. The coordinates are from the center of the bitmap, thus on a 256 by 256 bitmap, an object at 0.0,0.0 would be drawn at 128,128 on the bitmap. I also found the furthest extent and made the bitmap size 2 times the extent. So if the furthest extent is 200,200 pixels, then the bitmap's size is 400,400. Unfortunately this is a bit inefficient. If a bitmap needs to be drawn at 500,500 and the other one at 300,300, then the target bitmap only needs to be 200,200 in size. I cannot seem to find a correct way to draw in the components correctly with a reduced size. I figure out the target bitmap size like this: float AvatarComposite::getFloatWidth(float& remainder) const { float widest = 0.0f; float widestNeg = 0.0f; for(size_t i = 0; i < m_components.size(); ++i) { if(m_components[i].getSprite() == NULL) { continue; } float w = m_components[i].getX() + ( ((m_components[i].getSprite()->getWidth() / 2.0f) * m_components[i].getScale()) / getWidthToFloat()); float wn = m_components[i].getX() - ( ((m_components[i].getSprite()->getWidth() / 2.0f) * m_components[i].getScale()) / getWidthToFloat()); if(w > widest) { widest = w; } if(wn > widest) { widest = wn; } if(w < widestNeg) { widestNeg = w; } if(wn < widestNeg) { widestNeg = wn; } } remainder = (2 * widest) - (widest - widestNeg); return widest - widestNeg; } And here is how I position and draw the bitmaps: int dw = m_components[i].getSprite()->getWidth() * m_components[i].getScale(); int dh = m_components[i].getSprite()->getHeight() * m_components[i].getScale(); int cx = (getWidth() + (m_remainderX * getWidthToFloat())) / 2; int cy = (getHeight() + (m_remainderY * getHeightToFloat())) / 2; cx -= m_remainderX * getWidthToFloat(); cy -= m_remainderY * getHeightToFloat(); int dx = cx + (m_components[i].getX() * getWidthToFloat()) - (dw / 2); int dy = cy + (m_components[i].getY() * getHeightToFloat()) - (dh / 2); g->drawScaledSprite(m_components[i].getSprite(),0.0f,0.0f, m_components[i].getSprite()->getWidth(),m_components[i].getSprite()->getHeight(),dx,dy, dw,dh,0); I basically store the difference between the original 2 * longest extent bitmap and the new optimized one, then I translate by that much which I would think would cause me to draw correctly but then some of the components look cut off. Any insight would help. Thanks

    Read the article

  • Help needed with pyparsing [closed]

    - by Zearin
    Overview So, I’m in the middle of refactoring a project, and I’m separating out a bunch of parsing code. The code I’m concerned with is pyparsing. I have a very poor understanding of pyparsing, even after spending a lot of time reading through the official documentation. I’m having trouble because (1) pyparsing takes a (deliberately) unorthodox approach to parsing, and (2) I’m working on code I didn’t write, with poor comments, and a non-elementary set of existing grammars. (I can’t get in touch with the original author, either.) Failing Test I’m using PyVows to test my code. One of my tests is as follows (I think this is clear even if you’re unfamiliar with PyVows; let me know if it isn’t): def test_multiline_command_ends(self, topic): output = parsed_input('multiline command ends\n\n',topic) expect(output).to_equal( r'''['multiline', 'command ends', '\n', '\n'] - args: command ends - multiline_command: multiline - statement: ['multiline', 'command ends', '\n', '\n'] - args: command ends - multiline_command: multiline - terminator: ['\n', '\n'] - terminator: ['\n', '\n']''') But when I run the test, I get the following in the terminal: Failed Test Results Expected topic("['multiline', 'command ends']\n- args: command ends\n- command: multiline\n- statement: ['multiline', 'command ends']\n - args: command ends\n - command: multiline") to equal "['multiline', 'command ends', '\\n', '\\n']\n- args: command ends\n- multiline_command: multiline\n- statement: ['multiline', 'command ends', '\\n', '\\n']\n - args: command ends\n - multiline_command: multiline\n - terminator: ['\\n', '\\n']\n- terminator: ['\\n', '\\n']" Note: Since the output is to a Terminal, the expected output (the second one) has extra backslashes. This is normal. The test ran without issue before this piece of refactoring began. Expected Behavior The first line of output should match the second, but it doesn’t. Specifically, it’s not including the two newline characters in that first list object. So I’m getting this: "['multiline', 'command ends']\n- args: command ends\n- command: multiline\n- statement: ['multiline', 'command ends']\n - args: command ends\n - command: multiline" When I should be getting this: "['multiline', 'command ends', '\\n', '\\n']\n- args: command ends\n- multiline_command: multiline\n- statement: ['multiline', 'command ends', '\\n', '\\n']\n - args: command ends\n - multiline_command: multiline\n - terminator: ['\\n', '\\n']\n- terminator: ['\\n', '\\n']" Earlier in the code, there is also this statement: pyparsing.ParserElement.setDefaultWhitespaceChars(' \t') …Which I think should prevent exactly this kind of error. But I’m not sure. Even if the problem can’t be identified with certainty, simply narrowing down where the problem is would be a HUGE help. Please let me know how I might take a step or two towards fixing this.

    Read the article

  • Need help fixing DPKG errors after update from 12.04 to 12.10

    - by James Wulfe
    So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

    Read the article

  • Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

    - by Amrutha
    Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows: --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 --volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then --c1:setFillColor(10,105,0) --c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I'll try to frame the query better :). Thanks in advance.

    Read the article

  • Help with Collision of spawned object(postion fixed) with objects that there are translating on screen

    - by Amrutha
    Hey guys I am creating a game using Corona SDK and so coding it in Lua. So there are 2 separate functions, To translate the hit objects and change their color when they are tapped The link below is the code I am using to for the first function http://developer.anscamobile.com/sample-code/fishies Spawn objects that will hit the translating objects on collision. Alos on collision the spawned object disappears and the translating object bears a color(indicating the collision). In addition the size of this spawned object is dependent on i/p volume level. The function I have written is as follows, --VOICE INPUT CODE local r = media.newRecording() r:startRecording() r:startTuner() --local function newBar() -- local bar = display.newLine( 0, 0, 1, 0 ) -- bar:setColor( 0, 55, 100, 20 ) -- bar.width = 5 -- bar.y=400 -- bar.x=20 -- return bar --end local c1 = display.newImage("str-minion-small.png") c1.isVisible=false local c2 = display.newImage("str-minion-mid.png") c2.isVisible=false local c3 = display.newImage("str-minion-big.png") c3.isVisible=false --SPAWNING local function spawnDisk( event ) local phase = event.phase local volumeBar = display.newLine( 0, 0, 1, 0 ) volumeBar.y = 400 volumeBar.x = 20 -- volumeBar.isVisible=false local v = 20*math.log(r:getTunerVolume()) local MINTHRESH = 30 local LEFTMARGIN = 20 local v2 = MINTHRESH + math.max (v, -MINTHRESH) v2 = (display.contentWidth - 1 * LEFTMARGIN ) * v2 / MINTHRESH volumeBar.xScale = math.max ( 20, v2 ) local l = volumeBar.xScale local cnt1 = 0 local cnt2 = 0 local cnt3 = 0 local ONE =1 local val = event.numTaps --local px=event.x --local py=event.y if "ended" == phase then --audio.play( popSound ) --myLabel.isVisible = false if l > 50 and l <=150 then -- c1:setFillColor(10,105,0) -- c1.isVisible=false c1.x=math.random( 10, 450 ) c1.y=math.random( 10, 300 ) physics.addBody( c1, { density=1, radius=10.0 } ) c1.isVisible=true cnt1= cnt1+ ONE return c1 elseif l > 100 and l <=250 then --c2:setFillColor(200,10,0) c2.x=math.random( 10, 450 ) c2.y=math.random( 10, 300 ) physics.addBody( c2, { density=2, radius=9000.0 } ) c2.isVisible=true cnt2= cnt2+ ONE return c2 elseif l >=250 then c3.x=math.random( 40, 450 ) c3.y=math.random( 40, 300 ) physics.addBody( c3, { density=2, radius=7000.0 , bounce=0.0 } ) c3.isVisible=true cnt3= cnt3+ ONE return c3 end end end buzzR:addEventListener( "touch", spawnDisk ) -- touch the screen to create disks Now both functions work fine independently but there is no collision happening. Its almost as if the translating object and the spawn object are on different layers. The translating object passes through the spawn object freely. Can anyone please tell me how to resolve this problem. And how can I get them to collide. Its my first attempt at game development, that too for a mobile platform so would appreciate all help. Also if I have not been specific do let me know. I ll try to frame the query better :). Thanks in advance.

    Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >