Search Results

Search found 6065 results on 243 pages for 'usb modeswitch'.

Page 19/243 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• USB modem dosn't working in Ubuntu

  - by skeeph

  In Ubuntu 12.10 USB-modem Huawei 171 from MTS is not connected to the network. First on the message "Are you registered on the network", immediately after that, "You are disconnected from the network." This happened after there was an internal error notification Ubuntu. I did not pay attention, and closed by sending the report. After the reboot does not work. Settings are not changed. I am online with this modem in Windows 8. Could you tell me why it is not working,please thank you in advance P.S Sorry for my English. It's foreign language for me. Please mention to me where are my mistakes. Thanks

  Read the article

• Ubuntu 12.04 USB (HP)

  - by xShadoWolf

  I have put ubuntu 12.04 on a USB (Kingston 8GB) and I go to install and I can't it gives options for erase and something else I have 4 primary partitions win7 for my main partition and 3 created by HP HP_TOOLS, HP_RECOVERY and SYSTEM To get to my point how do I install ubuntu on HDD I have a HP probook 200 notebook PC. Can I remove any partitions? When I do sudo fdisk -l This Comes Up Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ed7e7b0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 946591743 473091072 7 HPFS/NTFS/exFAT /dev/sda3 946591744 976560127 14984192 7 HPFS/NTFS/exFAT /dev/sda4 976560128 976771119 105496 c W95 FAT32 (LBA) Disk /dev/sdb: 7803 MB, 7803174912 bytes 122 heads, 58 sectors/track, 2153 cylinders, total 15240576 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 8064 15240575 7616256 c W95 FAT32 (LBA)

  Read the article

• Encrypted usb stick not booting anymore how can I resolve the Disaster

  - by statquant

  Guys I am experiencing massive problem here. I created a bootable usb stick that I "full disk" encrypted with Ubuntu 13.04. I was using it when it froze. I had to reboot it manually and now I cannot boot on it anymore (It is not listed in the boot menu anymore) If I put when I run Ubuntu on my laptop ubuntu can see it and I am asked for a password But the correct password does not seem to work (I assume that this passphrase is the one I was using previously at startup) Can you please help me figure this thing out, this is massive problem to me...

  Read the article

• USB Port not working for Ubuntu 14.04 LTS

  - by user292125

  I have recently installed Ubuntu 14.04 LTS on my system. But the usb port does not seem to be working. When I type lsusb in terminal, following is displayed on the screen: Bus 002 Device 114: ID 0951:1665 Kingston Technology Bus 002 Device 004: ID 413c:2106 Dell Computer Corp. Dell QuietKey Keyboard Bus 002 Device 003: ID 04ca:0062 Lite-On Technology Corp. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub. However the disk utility shows no media. Kindly help me on this. Suggestions will be appreciated.

  Read the article

• usb stop working

  - by miguel

  I'm using Xubuntu 12.04 on a 64 bit Intel core duo laptop and the 3 USB 3.0 ports stopped working if I do not use the mouse. I updated the kernel to 3.9 but the bug persists. I googled too much and the few reponses I got cannot fixed this. The only solution is shuting down, unplugging and then plugging them back, then all works fine. But after half an hour or two days the bug reappears. How can I solve this? Thanks and excuse my poor english.

  Read the article

• How to get rid of auto-generated sequence number in network's device name in Windows?

  - by Piotr Dobrogost

  Every time one plugs in the same usb wireless adapter in a new usb port, Windows creates new network device with auto-generated sequence number which looks like this Wireless-N USB Network Adapter #2, Wireless-N USB Network Adapter #3, ... The name of a device is being displayed as part of network's information in Control Panel|Network Connections. How can I get rid of this sequence number? I found out device name which is displayed in network's information is kept in the FriendlyName REG_SZ value under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_[device specific string]\[usb port specific string] However when I try to modify this value I get error Cannot edit FriendlyName: Error writing the value's new contents. I tried to delete extra keys under HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Enum\USB\VID_13B1&PID_0029 but got Cannot delete KEY NAME: Error while deleting key. error. Trying to solve this problem I followed this answer but trying to change owner with Replace owner on subcontainers and objects option checked I got this error - Registry Editor could not set owner on the currently selected, or some of its subkeys. To find out which subkey is the source of problem I tried changing owner of each subkey. After successfully changing owner of Properites subkey I saw it has subkeys which were previously hidden. Now trying to change owner of these subkeys looks like this: Any idea how to delete these keys?

  Read the article

• Formatted USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine

  - by Željko Filipin

  I have formatted Canyon CN-MP4A USB flash drive with Disk Utility on Mac and now it is not recognized on any Mac or Windows machine. I have formatted with Disk Utility > drive > Erease > Format > MS-DOS (FAT). Now when I plug it in any Mac or Windows machine, nothing happens. Like nothing is plugged in. It has a screen, and I was able to format it directly from the device before, but now when I turn it on, welcome screen appears, but nothing else. I can not get to the menu. Is there a way I can format it? I am looking for the answer on the internet, but no luck so far.

  Read the article

• Is there a command line (or autohotkey) way of dismounting a USB drive?

  - by justintime

  I find dismounting a USB drive takes far too many mouse clicks for my liking. Is there are command line way of doing it (XP and Vista)? Addition I have an eye condition that makes hand mouse coordination difficult so any suggestion that there aren't too many clicks will be downvoted as not answering my question. However I use AutoHotkey a lot and one use case would be to call it from an AHK script. So if there is a way to code it in AHK that will do. Added this to the tags. Further question - is it safe to remove a disk when the computer is a. on Standby or b. Hibernated. I recall that W2000 got uspet if you pulled a disk from a hibernated machine. Or is it better to explicitly dismount or sync before you hibernate or standby - prabably in a script.

  Read the article

• If using a bootable Ubuntu USB drive, can I use the internal hard drive as a temporary download and

  - by NoCatharsis

  I am new to Linux, so this is probably a basic problem... My flash drive is only 4GB in size and that is not enough to hold kernel and other package updates, even if only temporary. I am actually using Kubuntu, but I don't think this would change the nature of the question...? I would just like to be able to set my download directory to the internal drive to download the upgrades, then replace the old versions installed on the USB. Of course I have no use for keeping the older versions, so would I also have to manually remove those after upgrading?

  Read the article

• Is there a Generic USB TouchScreen Driver 12.04?

  - by lbjoum

  Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

  Read the article

• How can I remove all drivers and other files related to a USB Mass Storage device?

  - by Bob

  I have a flash drive here that does not work on one OS on computer - let's call it the desktop Windows 7. It works fine on another computer - laptop Windows 7. It also works fine on Windows 8 on the same desktop computer. Other flash drives work fine under desktop Windows 7. So not a hardware issue, not a generic USB Mass Storage driver issue. It's something specific to this drive. On desktop Windows 7, I can connect the drive but no volume comes up under Windows Explorer. Ditto for Disk Management. With diskpart, loading hangs until I unplug the drive, if I replug it and try list disk it hangs again. If I unplug the drive at this point, list disk prints out all attached drives - including the just removed flash drive. The drive consistently appears under Device Manager, but uninstalling the drivers, restarting and reinstalling the drivers (by inserting the drive) only works for the first insertion. After that it fails again. I get the feeling that the driver files are not actually removed, and are corrupted, meaning every reinstall it's the same corrupted drivers being installed. Is there any way to remove these drivers completely? Or perhaps some other setting Windows 7 retains? Formatting the drive through another computer/OS does not help. I've also tried a complete wipe and rebuild of the MBR and single partition. The allocation unit size makes no difference; neither does a NTFS format. This is a relatively small matter, and I would not like to reinstall the entire OS!

  Read the article

• Trouble installing Ubuntu 12.04 from USB

  - by Kyle J

  I want to dual-boot Ubuntu Desktop 12.04 on my new ultrabook which has an Intel i7 3517U processor 6GB RAM Windows 7, 64-bit no CD/DVD drive I created my bootable USB stick using pendrivelinux.com with the "ubuntu-12.04.1-desktop-i386.iso". I am following these directions because they include nice screenshots; however, I do not get very far in the process. I am able to boot into the Live Desktop, and then I try to install onto my hard disk. Here are the series of actions that I take next: First, I see this ( http://i.imgur.com/vucYH ) window, and click 'continue' Then I get this ( http://imgur.com/2wESc ) window, and click 'continue' again This appears: and I get worried because it seems like there is no recognition that I have Windows installed. According to the directions I am following, I should see /dev/sda1 and /dev/sda2 partitions. In the drop-down menu at the bottom the only "Device for boot loader installation" is /dev/sdb and no information is shown. I am hesitant to click 'Install Now' for fear of what it might do to Windows. 4. I click 'Quit' and cancel the installation, but then about 5 seconds later this ( http://imgur.com/a/yXi0C ) window pops up (I have expanded it to full screen to scroll and show all the details). 5. Another second later this ( http://imgur.com/vxcrN ) comes up. I'm not sure how relevant this is. Does anyone have any insight into this issue?? Why does it not show my current Windows partition? What would happen if I tried to continue with the installation process? Thanks! PS - sorry, it would only let me post 2 hyperlinks as a new user

  Read the article

• unable to access usb device.

  - by Tom

  Hi everyone, I'm reading my boot logs, at /var/log trying to understand why the boot process is taking so long. I found that the system can't access many usb devices, but can't understand why. Is there a way to stop Ubuntu from trying to access them? Here are the lines: /var/log# grep -r "usb_id" . ./boot.log:usb_id[716]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/mouse1' ./boot.log:usb_id[721]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./boot.log:usb_id[725]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input7/event7' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./syslog:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[955]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[956]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/mouse3' ./daemon.log:Jan 12 21:12:05 TomsterInc usb_id[963]: unable to access '/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input16/event16' Any help will be greatly appreciated. Thanks in advance.

  Read the article

• Cannot mount USB drive -- FSTAB error

  - by user107646

  Recently, one of my desktops seems to have developed a problem with the fstab and mounting USB drives. The specific error I receive is... Unable to mount TRAVELDRIVE Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at http://tuxera.com/community/ntfs-3g-faq/#unprivileged The contents of my fstab are... /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sdc1 : UUID=7e3431cd-522f-4e35-b286-4300fa702d4a / ext4 errors=remount-ro 0 1 #Entry for /dev/sda1 : UUID=60684D08684CDE82 /media/Archive ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdc5 : UUID=cd166221-4b1d-40f7-b9de-785208990587 none swap sw 0 0 /dev/sdd1 /media/sdd1 ntfs nls=iso8859-1,ro,users,umask=000,user 0 0 /dev/sdd5 /media/PS3 (fat32) vfat users,user 0 0 /dev/sdd5 /media/sdd5 vfat uid=m3talhead,users,user 0 0 I'm guessing its a problem with the duplicate /dev/sdd5 entries (?), but being the *nix noob I am, I'm not certain. What am I missing? Any assist is greatly appreciated!

  Read the article

• 1.5 TB USB Drive failed to mount

  - by user89348

  Seagate 1.5Tb FreeAgent USB Hard Drive. Formatted FAT32. I figure it is 75% full. Used to work fine in XUBUNTU it shows up in Cairo Dock but when I click on it I get "failed to mount drive'. Nautilus does not display the icon nor does Thunar. Windows Vista will no longer recognise drive either. Back Track 5R3 also no longer fails to mount it. BUT and here is the BIG BUT my Pioneer DV-410 reads the files and plays the everything just fine. I believe this all happened after an unclean shutdown / XUbuntu 12.10 system freeze. Why can't XUBUNTU mount this drive when a crappy 13 year old DVD player can mount it. I am desperate to back up the data before just in case the drive becomes completely unreadable. Using XUBUNTU 12.10 Quantal current 3.5.0.17 Kernel (past 3 Kernels wont read it either) and all newest apt-get update / dist-upgrade are applied. I will post any other info you folks request as needed. Additional info as requested by githlar. $ sudo fsck.vfat /dev/sdb dosfsck 3.0.13, 30 Jun 2012, FAT32, LFN Read 512 bytes at 0:Input/output error $ lsusb Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter Bus 002 Device 002: ID 0bc2:3001 Seagate RSS LLC Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• How to create an GUI that communicate with the USB Devices

  - by VINAYAK

  I am doing my Project using win 32 programming.I am just learning about win32 programming and able to create an UI.I want to communicate with an USB Device with that UI.SO,How can i go for that?Is there any predefined functions will be there are we need to create the function for communicating with the OS and get the devices List and got the details about them. My purpose is to , 1.Creating an UI that tells about the Basic information about the device(We want to send a control request to the device to get the descriptors). 2.For that first of all i want to communicate with the OS for device attachment.That will lead to get the information about the device and Enumeration takes place and then only i request the device information through descriptors by using standard Requests. 3.And also i want to create the driver for my device.That will also need to achieve for communicating with OS(Windows). So,can anyone help me about this?How can i achieve this or approach this? Note: I am at the entry level now so anyone give response will be in a detailed format like step by step process would be appreciable.

  Read the article

• USB Keyboard doesn't work in Ubuntu 14.04

  - by Steven Crossan

  My USB keyboard isn't working in Ubuntu 14.04, but also didn't work in 13.10. I upgraded today in the hope that the issue would be resolved, but it wasn't. The keyboard works in BIOS and GRUB but stops working when I reach the login screen. It is detected by the system, but just doesn't work. Output of lsusb: Bus 002 Device 002: ID 0846:9011 NetGear, Inc. WNDA3100v2 802.11abgn [Broadcom BCM4323] Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 1532:000d Razer USA, Ltd Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 060b:2231 Solid Year KSK-6001 UELX Keyboard Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I added: hid usbhid hid_generic ohci_pci To /etc/initramfs-tools/modules and did update-initramfs -u, but that didn't work. I'm new to Ubuntu/Linux and any help you could provide would be greatly appreciated!

  Read the article

• Cannot Create Bootable USB Drive from .iso file

  - by tarabyte

  I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

  Read the article

• Ubuntu 12.04 LTS - Apple iPad 3 (iOS 7 non-jailbroken) USB connection problem

  - by Eldian

  I've bought an Apple iPad 3 (iOS 7 non-jailbroken), and I'm trying to connect it to my PC running Ubuntu 12.04 through the original USB cable. After I plugged in the cable, I got this message on the PC: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. Slide to unlock on iPad, it's OK, I got this message on the PC again: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. iPad: Trust this computer? TRUST/DON'T TRUST I've selected TRUST. PC: Unable to mount - DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) OK, I've read some forums, everywhere there was this solution: "Install: ifuse, libimobiledevice-utils, Rhythmbox OK, I've installed them through terminal, and used the idevicepair unpair && idevicepair pair command also in the terminal. Then I got this message: Device is not paired with this host. I don't know what to do. Please help!

  Read the article

• ifconfig can't see USB wireless

  - by Alex

  I have a wifi USB dongle which I have previously used on a Raspberry Pi (this it is what it is target at). I am trying to get it working on an Nvidia Jetson TK1, however I am having some problems. When I run ifconfig I can't see the wifi, only the ethernet and local loopback. iwconfig reports no wireless extensions on all devices. lsusb does find the device: Bus 002 Device 008: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter So I am not sure why the network tools can't see it. I have tried logging on with a GUI and opening up the network settings through Unity, but cannot see any wireless devices either. Not sure if this is useful, but output of lsmod: Module Size Used by nvhost_vi 2940 0 How can I enable wireless networking on this computer? Command line approach is preferred, but either is fine. UPDATE I don't have the kernel module rt2800usb anywhere on my system. If I do an apt-file search for rt2800usb it lists a number of packages of the pattern: linux-image-3.13.0-*. Perhaps installing one of these will do the trick, but can anyone tell me if its safe to do so?

  Read the article

• Usb stick too slow to benchmark?

  - by user85340

  I have a Core 2 Duo [email protected] with 3GB RAM. After some time using XUbuntu 10.10 on an 8GB stick I decided to switch to 12.04 and put it onto a 32GB stick (Transcend). I use an EXT4 with no journalling, noatime etc set. /tmp and /run is using tmpfs. And it is REALLY slow. MUCH slower than the old Xubuntu on the 8GB stick. Starting takes minutes, all applications "fade" because they respond too slow. I first thought that the NVidia graphics card is responsible for this, because there seem to be some known problems with that. Doing the adjustment (uncheck the sync checkbox) did not help. I believe the root cause is that the access to the USB stick is extremely slow. Running the read benchmark of the disk utility then brought the message "disk is too slow to benchmark"! BUT: When I do the same benchmark with the live CD I get around 20MB read performance and have a very responsive system! So how can I find out what is going one here?

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• Can I do full install on 4GB usb stick? [closed]

  - by Radek

  Possible Duplicate: How do I install Ubuntu to a USB key? Can I do full install of Ubuntu 11.10 on 4GB usb stick? Can I do so without downloading alternate version of Ubuntu? All I want is firefox wi-fi What I have live USB of Ubuntu 11.10 notebook without hdd internet access 4GB usb stick UPDATE after this question was closed The reason why I need full install is to install new programs (skype) and do upgrade (of flash player)

  Read the article

• Can I just download the Ubuntu ISO file to my USB and run it straight away with no installers?

  - by Paul Clarke

  I don't have access to running any installer at the minute so I knew that if running from the CD you just burn the iso file to the CD and your ready to go..but can I download this iso file to my USB and run it straight away when I change my bios to boot from USB?..or do I have to use the installer?..I can't use the installer for different reasons and I'm not really looking to install ubuntu just yet I just want to run it off my USB to try it out..so is it possible not to use the installer to put it on my USB? (I downloaded Ubuntu 12.10)

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >