Search Results

Search found 5709 results on 229 pages for 'persistence unit'.

Page 190/229 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

  • Common business drivers that lead to creating and sustaining a project

    Common business drivers that lead to creating and sustaining a project include and are not limited to: cost reduction, increased return on investment (ROI), reduced time to market, increased speed and efficiency, increased security, and increased interoperability. These drivers primarily focus on streamlining and reducing cost to make a company more profitable with less overhead. According to Answers.com cost reduction is defined as reducing costs to improve profitability, and may be implemented when a company is having financial problems or prevent problems. ROI is defined as the amount of value received relative to the amount of money invested according to PayperclickList.com.  With the ever increasing demands on businesses to compete in today’s market, companies are constantly striving to reduce the time it takes for a concept to become a product and be sold within the global marketplace. In business, some people say time is money, so if a project can reduce the time a business process takes it in fact saves the company which is always good for the bottom line. The Social Security Administration states that data security is the protection of data from accidental or intentional but unauthorized modification, destruction. Interoperability is the capability of a system or subsystem to interact with other systems or subsystems. In my personal opinion, these drivers would not really differ for a profit-based organization, compared to a non-profit organization. Both corporate entities strive to reduce cost, and strive to keep operation budgets low. However, the reasoning behind why they want to achieve this does contrast. Typically profit based organizations strive to increase revenue and market share so that the business can grow. Alternatively, not-for-profit businesses are more interested in increasing their reach within communities whether it is to increase annual donations or invest in the lives of others. Success or failure of a project can be determined by one or more of these drivers based on the scope of a project and the company’s priorities associated with each of the drivers. In addition, if a project attempts to incorporate multiple drivers and is only partially successful, then the project might still be considered to be a success due to how close the project was to meeting each of the priorities. Continuous evaluation of the project could lead to a decision to abort a project, because it is expected to fail before completion. Evaluations should be executed after the completion of every software development process stage. Pfleeger notes that software development process stages include: Requirements Analysis and Definition System Design Program Design Program Implementation Unit Testing Integration Testing System Delivery Maintenance Each evaluation at every state should consider all the business drivers included in the scope of a project for how close they are expected to meet expectations. In addition, minimum requirements of acceptance should also be included with the scope of the project and should be reevaluated as the project progresses to ensure that the project makes good economic sense to continue. If the project falls below these benchmarks then the project should be put on hold until it does make more sense or the project should be aborted because it does not meet the business driver requirements.   References Cost Reduction Program. (n.d.). Dictionary of Accounting Terms. Retrieved July 19, 2009, from Answers.com Web site: http://www.answers.com/topic/cost-reduction-program Government Information Exchange. (n.d.). Government Information Exchange Glossary. Retrieved July 19, 2009, from SSA.gov Web site: http://www.ssa.gov/gix/definitions.html PayPerClickList.com. (n.d.). Glossary Term R - Pay Per Click List. Retrieved July 19, 2009, from PayPerClickList.com Web site: http://www.payperclicklist.com/glossary/termr.html Pfleeger, S & Atlee, J.(2009). Software Engineering: Theory and Practice. Boston:Prentice Hall Veluchamy, Thiyagarajan. (n.d.). Glossary « Thiyagarajan Veluchamy’s Blog. Retrieved July 19, 2009, from Thiyagarajan.WordPress.com Web site: http://thiyagarajan.wordpress.com/glossary/

    Read the article

  • Silverlight Cream for December 13, 2010 -- #1010

    - by Dave Campbell
    In this Issue: Rénald Nollet, Benjamin Gavin, Dennis Doomen, Tim Greenfield, Mike Taulty, Jeff Blankenburg, Michael Crump, Laurent Duveau, Dragos Manolescu, KeyboardP, Yochay Kiriaty. Above the Fold: Silverlight: "Silverlight RIA Services and Basic, Anonymous Authentication" Benjamin Gavin WP7: "lving Circular Navigation in Windows Phone Silverlight Applications" Yochay Kiriaty SQL Azure: "SQL Azure Database Manager – Part 1 : How to connect to your SQL Azure DB" Rénald Nollet Shoutouts: Yochay Kiriaty has a post up on the Windows Phone Devloper Blog about open source (MSPL) projects helping WP7 devs: Windows Phone Recipes – Helping the Community Jesse Liberty's latest Yet Another Podcast is up and thie time it's Joe Stagner: Yet Another Podcast #18 – Joe Stagner Josh Schwartzberg sent me this link to what is apparently his yearly web-only rock Christmas album: MetalXmas... done in Silverlight and RIA Services From SilverlightCream.com: SQL Azure Database Manager – Part 1 : How to connect to your SQL Azure DB Rénald Nollet posted Part 1 of a series on a SQL Azure database manager all in Silverlight... has a live demo running, some description, and is making us wait for the next part! Silverlight RIA Services and Basic, Anonymous Authentication Benjamin Gavin has a quick post up resolving a basic RIA Services problem that I bet a lot of folks are looking for the answer on... like 500 series errors... cool little find he ferreted out... A night of Silverlight, WPF, unit testing and Caliburn Micro Dennis Doomen in concert with his employer gave a couple talks at the local DotNED user group, and covered literally a cornucopia of topics... slides, and example code for both talks... lotsa material here... Tim Greenfield on PuzzleTouch WP7 Application Tim Greenfield is the latest WP7 app developer to be interviewed by the SilverlightShow crew... lots of interesting comments and insight from Tim. Rebuilding the PDC 2010 Silverlight Application (Part 4) Mike Taulty has part 4 of his PDC 2010 Silverlight app construction project up and is taking the app into Blend, and the considerations that brought to the table. What I Learned In WP7 – Issue #2 Jeff Blankenburg continues his "What I Learned" series with this discussion about fonts, the Non-Linear Navigation service I mention below, and possible WP7 jobs. Part 3 of 4 : Tips/Tricks for Silverlight Developers Michael Crump has Part 3 of his Tips/Tricks up today. Lots of goodies this time: underlining in a TextBlock, getting browser info, startup params, VisualTreeHelper, and child windows. My Windows Phone 7 presentation in Montreal Laurent Duveau gave a WP7 presentation in Montreal as part of the Microsoft Windows Phone 7 Developer's Briefing, and has posted his materials and slide deck WP7 Code: Mocking Event Streams with IEnumerable Dragos Manolescu has a very cool post up on using IEnumerable to Mock event streams by leveraging the IObservable/IEnumerable duality, and uses the 2D bubble app that you can run and test in the emulator without needing an accelerometer Transparent Wallpapers – Video Tutorial KeyboardP has had so many queries about his Transparent wallpaper for WP7 that he produced a video tutorial for it... Solving Circular Navigation in Windows Phone Silverlight Applications Yochay Kiriaty discusses the first recipe they are releasing ... see the shoutout above, a Nonlinear Navigation Service ... to help with apps that have loops in navigation. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • HP and Microsoft: That&rsquo;s What Friends Are For ?

    - by andrewbrust
    Today, HP pre-announced the second coming out for its recently acquired Palm webOS mobile operating system.  I happen to think webOS is quite good, and when the Palm Pre first came out, I thought it a worthwhile phone.  I was worried though that the platform would never attract the developer mindshare it needed to be competitive, and that turned out to be the case.  But then HP acquired Palm and announced it would be revamping the webOS offering, not only on phones, but also on tablets.  It later announced that it would also use webOS as an embedded solution on HP printers. The timing of this came shortly after HP had announced it would be producing a “Slate” product running Windows 7. After the Palm deal, HP became vague about whether the Windows-powered slate would actually come out.  They did, in fact, bring the Slate 500 to market, but by some accounts, they only built 5000 units. Another recent awkward moment between HP and Microsoft: HP withdrew itself from the Windows Home Server ecosystem.  That one hurt, as they were the dominant OEM there.  But Microsoft’s decision to kill Drive Extender had driven away many parties, not just HP. On Wednesday, HP came out with their TouchPad, and new phone models.  Not a nice thing for Windows Phone 7, but other OEMs are taking a wait and see attitude there too, I suppose.  There was one more zinger though, and it was bigger: HP announced they’d be porting webOS to PCs. No Windows Phone 7? OK. No Windows Home Server?  Whatcha gonna do?  But no Windows 7 either?  From HP?  What comes after that, no ink and toner? Some people think Microsoft’s been around too long to be relevant.  But HP started out making oscilloscopes!  The notion that HP is too cool for Windows school is a it far-fetched.  This is the company that bought EDS. This is the company that bought Compaq.  And Compaq was the company that bought Digital Equipment Corporation.  Somehow, I don’t think the VT 220 outclasses Windows PCs. What could possibly be going on?  My sense is that HP wants to put webOS on PCs that also have Windows, and that people will buy because they have Windows.  And for every one of those sold, HP gets to count, technically speaking, another webOS unit in the install base.  webOS is really nice, as I said.  But being good isn’t good enough when you are trying to get market share.  Number of units shipped matters.  The question is whether counting PCs with webOS installed, but dormant, is helpful to HP’s cause.  Seems like a funny way to account for market share, and a strange way to treat a big partner in Redmond.

    Read the article

  • BizTalk 2009 - Architecture Decisions

    - by StuartBrierley
    In the first step towards implementing a BizTalk 2009 environment, from development through to live, I put forward a proposal that detailed the options available, as well as the costs and benefits associated with these options, to allow an informed discusion to take place with the business drivers and budget holders of the project.  This ultimately lead to a decision being made to implement an initial BizTalk Server 2009 environment using the Standard Edition of the product. It is my hope that in the long term, as projects require it and allow, we will be looking to implement my ideal recommendation of a multi-server enterprise level environment, but given the differences in cost and the likely initial work load for the environment this was not something that I could fully recommend at this time.  However, it must be noted that this decision was made in full awareness of the limits of the standard edition, and the business drivers of this project were made fully aware of the risks associated with running without the failover capabilities of the enterprise edition. When considering the creation of this new BizTalk Server 2009 environment, I have also recommended the creation of the following pre-production environments:   Usage Environment Development Development of solutions; Unit testing against technical specifications; Initial load testing; Testing of deployment packages;  Visual Studio; BizTalk; SQL; Client PCs/Laptops; Server environment similar to Live implementation; Test Testing of Solutions against business and technical requirements;  BizTalk; SQL; Server environment similar to Live implementation; Pseudo-Live As Live environment to allow testing against Live implementation; Acts as back-up hardware in case of failure of Live environment; BizTalk; SQL; Server environment identical to Live implementation; The creation of these differing environments allows for the separation of the various stages of the development cycle.  The development environment is for use when actively developing a solution, it is a potentially volatile environment whose state at any given time can not be guaranteed.  It allows developers to carry out initial tests in an environment that is similar to the live environment and also provides an area for the testing of deployment packages prior to any release to the test environment. The test environment is intended to be a semi-volatile environment that is similar to the live environment.  It will change periodically through the development of a solution (or solutions) but should be otherwise stable.  It allows for the continued testing of a solution against requirements without the worry that the environment is being actively changed by any ongoing development.  This separation of development and test is crucial in ensuring the quality and control of the tested solution. The pseudo-live environment should be considered to be an almost static environment.  It should mimic the live environment and can act as back up hardware in the case of live failure.  This environment acts as an area to allow for “as live” testing, where the performance and behaviour of the live solutions can be replicated.  There should be relatively few changes to this environment, with software releases limited to “release candidate” level releases prior to going live. Whereas the pseudo-live environment should always mimic the live environment, to save on costs the development and test servers could be implemented on lower specification hardware.  Consideration can also be given to the use of a virtual server environment to further reduce hardware costs in the development and test environments, indeed this virtual approach can also be extended to pseudo-live and live assuming the underlying technology is in place. Although there is no requirement for the development and test server environments to be identical to live, the overriding architecture implemented should be the same as in live and an understanding must be gained of the performance differences to be expected across the different environments.

    Read the article

  • Having fun with Reflection

    - by Nick Harrison
    I was once asked in a technical interview what I could tell them about Reflection.   My response, while a little tongue in cheek was that "I can tell you it is one of my favorite topics to talk about" I did get a laugh out of that and it was a great ice breaker.    Reflection may not be the answer for everything, but it often can be, or maybe even should be.     I have posted in the past about my favorite CopyTo method.   It can come in several forms and is often very useful.   I explain it further and expand on the basic idea here  The basic idea is to allow reflection to loop through the properties of two objects and synchronize the ones that are in common.   I love this approach for data binding and passing data across the layers in an application. Recently I have been working on a project leveraging Data Transfer Objects to pass data through WCF calls.   We won't go into how the architecture got this way, but in essence there is a partial duplicate inheritance hierarchy where there is a related Domain Object for each Data Transfer Object.     The matching objects do not share a common ancestor or common interface but they will have the same properties in common.    By passing the problems with this approach, let's talk about how Reflection and our friendly CopyTo could make the most of this bad situation without having to change too much. One of the problems is keeping the two sets of objects in synch.   For this particular project, the DO has all of the functionality and the DTO is used to simply transfer data back and forth.    Both sets of object have parallel hierarchies with the same properties being defined at the corresponding levels.   So we end with BaseDO,  BaseDTO, GenericDO, GenericDTO, ProcessAreaDO,  ProcessAreaDTO, SpecializedProcessAreaDO, SpecializedProcessAreaDTO, TableDo, TableDto. and so on. Without using Reflection and a CopyTo function, tremendous care and effort must be made to keep the corresponding objects in synch.    New properties can be added at any level in the inheritance and must be kept in synch at all subsequent layers.    For this project we have come up with a clever approach of calling a base GetDo or UpdateDto making sure that the same method at each level of inheritance is called.    Each level is responsible for updating the properties at that level. This is a lot of work and not keeping it in synch can create all manner of problems some of which are very difficult to track down.    The other problem is the type of code that this methods tend to wind up with. You end up with code like this: Transferable dto = new Transferable(); base.GetDto(dto); dto.OfficeCode = GetDtoNullSafe(officeCode); dto.AccessIndicator = GetDtoNullSafe(accessIndicator); dto.CaseStatus = GetDtoNullSafe(caseStatus); dto.CaseStatusReason = GetDtoNullSafe(caseStatusReason); dto.LevelOfService = GetDtoNullSafe(levelOfService); dto.ReferralComments = referralComments; dto.Designation = GetDtoNullSafe(designation); dto.IsGoodCauseClaimed = GetDtoNullSafe(isGoodCauseClaimed); dto.GoodCauseClaimDate = goodCauseClaimDate;       One obvious problem is that this is tedious code.   It is error prone code.    Adding helper functions like GetDtoNullSafe help out immensely, but there is still an easier way. We can bypass the tedious code, by pass the complex inheritance tricks, and reduce all of this to a single method in the base class. TransferObject dto = new TransferObject(); CopyTo (this, dto); return dto; In the case of this one project, such a change eliminated the need for 20% of the total code base and a whole class of unit test cases that made sure that all of the properties were in synch. The impact of such a change also needs to include the on going time savings and the improvements in quality that can arise from them.    Developers who are not worried about keeping the properties in synch across mirrored object hierarchies are freed to worry about more important things like implementing business requirements.

    Read the article

  • How to convert from amateur web app developer to professional web apper?

    - by Nilesh
    This is more of a practical question on web app development and deployment process. Here is some background information. I use PHP for server side scripting, javascript for client side. I use Netbeans and notepad++. I user Firefox and firebug for debugging and testing. The process I use is very amateurish, I code something in netbeans, something in notepad++ and since there is nothing to compile, I just refresh the firefox browser and test it. This is convenient and faster compared to the Java development enviornment where you would have to atleast compile and deploy the jar files before you could run them. I have been thinking of putting a formal process in my development and find it hard putting it together. There are so many things to do before you can deploy your final web app. I keep hearing jslint, compression, unit testing (selenium), Ant, YUI compressor etc but I am now looking for some steps that I can take to make me more organized. For e.g I use netbeans but don't use any projects within it. I directly update the files. I don't use any source control but use my Iomega backup that saves each save into a different version and at the end of the day I backup the dev directory to my Amazon s3 account. For me development environment is just a DEV directory, TEST is my intermediate stage and PROD is the final directory that gets pushed out to the server. But all these directories are in the same apache home. I have few php scripts that just copies the needed files into the production directory. Thats about it for my development approach. I know I am missing the following - Regression testing (manual or automated ??) - automated testing (selenium ??) - automated deployment (ANT ??) - source control (svn ??) - quality control (jslint ??) Can someone explain what are the missing steps and how to go about filling those steps in order to have more professional approach. I am looking for tools with example tutorials in streamlining the whole development to deployment stage. For me just getting a hang of database, server side and client side development all in synchronization was itself a huge accomplishment. And now I feel there is lot missing before you can produce quality web application. For e.g I see lot of mention about using automated testing but how to put in use with respect to javascript and php. How to use ANT for the deployment etc. Is this all too much for a single or two person development team? Is there a way to automate all the above so that I just keep coding in netbeans and then run a batch file that is configured once and run it everytime to produce the code in the production directory? Lot of these information is scattered on the web and here, if someone can guide I would be happy to consolidate here. Thank you for your patience :)

    Read the article

  • Introducing Oracle System Assistant

    - by B.Koch
    by Josh Rosen One of the challenges with today's servers is getting the server up and running and understanding what all of the steps are once you plug the server in for the first time. So many different pieces come into play: installing drivers, updating firmware, configuring RAID, and provisioning the operating system. All of these steps must be done before you can even start using the server. Finding the latest firmware and drivers, making sure you have the right versions, and knowing that all the different software and firmware components work together properly can be a real challenge. If not done correctly, such as if you separately downloading disk firmware or controller firmware that doesn't match the existing OS drivers, you could experience bugs, performance problems, and incompatibilities. Gone are the days of having to locate the tools and drivers media that shipped with the server only to find out that newer versions of software and firmware are available on the web. Oracle has solved these challenges in the new X3-2 family of servers by introducing Oracle System Assistant. Oracle System Assistant is an innovative tool that is built-in to every new x86 server. It provides step-by-step assistance with configuring the server, updating firmware and drivers, and provisioning the operating system. Once you have completed all of the steps in the Oracle System Assistant tool, the server is ready to use. Oracle System Assistant was designed to be easy and straightforward. Starting it is as simple as pressing F9 when the server is booting. You'll need a keyboard, monitor, and mouse or you can use the remote console feature of Oracle ILOM (Integrated Lights Out Manager) to access a virtual KVM to the server from any machine. From there Oracle System Assistant will walk you through each of the steps necessary to set up your server. After configuring the network settings for Oracle System Assistant, the next step is to check for any new software or firmware for the server. Oracle System Assistant connects back to Oracle using your My Oracle Support account and downloads any updates that were made available to you for this specific server. This is where you really start to see the innovation that went into Oracle System Assistant. Firmware for Oracle ILOM and BIOS, operating system drivers, and other system firmware (including for option cards and disk drivers) come as a single bundle, downloading as a single unit, that has been engineered and tested to work together by Oracle. Oracle System Assistant figures out the right combination for your server, so you don't have to. Now that the server has the latest firmware, Oracle System Assistant will next walk you through configuring the hardware. From Oracle System Assistant, you can configure many Oracle ILOM settings, including the network settings and initial user accounts. This ensures that ILOM is accessible and ready to use. Oracle System Assistant is where all parts of the server come together. In addition to communicating with Oracle ILOM and interacting with BIOS, Oracle System Assistant understands and can configure the storage subsystem. Before installing the operating system, Oracle System Assistant can detect the storage configuration and configure RAID for all disks in the system. At this point, the server is ready to be provisioned with the host operating system. You can use Oracle System Assistant to provision a supported OS, including Oracle Linux, Oracle VM, RHEL, SuSe Linux, and Windows. And by using Oracle System Assistant, you can be sure that the proper OS drivers are installed for each of the installed hardware components. With Oracle System Assistant, initial setup of the server has never been easier. If we can innovate around problems and find solutions to make our servers easier to manage, this reduces IT costs and makes managing servers simpler. I think with Oracle System Assistant we have done just that. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

    Read the article

  • Knowledge Pathways Designer - Recommended Settings

    - by ted.henson
    The General page of the Options dialog box contains the application preferences for Knowledge Pathways Designer. It is recommended that you leave certain settings as they are, unless you have a specific reason for changing them. The following are a few of the settings on the General page with an explanation of the recommended setting. They are in the order they appear on the page: Allow version 2.0 style links: This option should remain disabled unless you were using content that was created using version 2.0 of Knowledge Pathways and you want the same linking functionality that existed in that version 2.0. This feature enables you to reuse parts of titles that contain no AUs. However, keep in mind that this type of link is not a true link, but a cross between a copy and a link. To create a 2.0 style link, you drag and drop sections between titles. You can only create 2.0 style links to sections that belong to the Title AU. When creating a version 2.0 style link, your mouse pointer will change to indicate a 2.0 link is being created. Confirm deletion of outline items and Confirm deletion of titles: It is recommended that these options remain enabled to avoid deleting something by accident. Display tracking data loss warning when opening a published title: It recommended that this option be enabled so you will receive the warning message when you open the development copy of a title, reminding you of the implications of your changes. ulCopy files when converting a Section to an Assignable Unit: This option should remain enabled unless you have a specific reason for not copying the files. If this is disabled, you will (in effect) lose your content files upon converting because they will not be copied to the new AU directory on the content root. In this case, you would need to use Windows Explorer to copy your files manually. Working with Spelling Options All of the spelling options are enabled by default. Your design team can review these options to determine if you want to make changes, depending upon your specific needs. Understanding Dictionary Options You should leave the dictionary options as they are, unless you have a specific reason for changing them. While you can delete the user (customizable) dictionary, doing so is not recommended. Setting Check In/Check Out Options The ability to check in and check out titles and AUs will impact the efficiency of your design team. Decide what your check in and check out processes are before you start developing titles. The Check In/Check Out page of the Options dialog box contains two options that affect what happens when you open a title using the Open Title dialog box. Both of these options are enabled by default and are described below: Check Out for editing enabled: This option ensures that the Check Out for editing option will be selected when you open the development copy of a title from the Open Title dialog box. If this option is disabled, you must select the Check Out for editing option every time you want to check out a title for editing. Attempt to Check Out for entire branch: When this option is enabled, Designer checks out the selected title and all AUs and sections that are part of that title, provided they are available for check out. If this option is disabled, you will only check out the Title AU and anything that belongs to that Title AU (e.g., sections, questions, etc.), but not other AUs. The Check In/Check Out page of the Options dialog box also contains options that control what happens when you close a title. You can choose one option in the Check In when Closing a Title area. The option selected is a matter of preference and you should determine which option is most appropriate for your design team.

    Read the article

  • Is the Cloud ready for an Enterprise Java web application? Seeking a JEE hosting advice.

    - by Jakub Holý
    Greetings to all the smart people around here! I'd like to ask whether it is feasible or a good idea at all to deploy a Java enterprise web application to a Cloud such as Amazon EC2. More exactly, I'm looking for infrastructure options for an application that shall handle few hundred users with long but neither CPU nor memory intensive sessions. I'm considering dedicated servers, virtual private servers (VPSs) and EC2. I've noticed that there is a project called JBoss Cloud so people are working on enabling such a deployment, on the other hand it doesn't seem to be mature yet and I'm not sure that the cloud is ready for this kind of applications, which differs from the typical cloud-based applications like Twitter. Would you recommend to deploy it to the cloud? What are the pros and cons? The application is a Java EE 5 web application whose main function is to enable users to compose their own customized Product by combining the available Parts. It uses stateless and stateful session beans and JPA for persistence of entities to a RDBMS and fetches information about Parts from the company's inventory system via a web service. Aside of external users it's used also by few internal ones, who are authenticated against the company's LDAP. The application should handle around 300-400 concurrent users building their product and should be reasonably scalable and available though these qualities are only of a medium importance at this stage. I've proposed an architecture consisting of a firewall (FW) and load balancer supporting sticky sessions and https (in the Cloud this would be replaced with EC2's Elastic Load Balancing service and FW on the app. servers, in a physical architecture the load-balancer would be a HW), then two physical clustered application servers combined with web servers (so that if one fails, a user doesn't loose his/her long built product) and finally a database server. The DB server would need a slave backup instance that can replace the master instance if it fails. This should provide reasonable availability and fault tolerance and provide good scalability as long as a single RDBMS can keep with the load, which should be OK for quite a while because most of the operations are done in the memory using a stateful bean and only occasionally stored or retrieved from the DB and the amount of data is low too. A problematic part could be the dependency on the remote inventory system webservice but with good caching of its outputs in the application it should be OK too. Unfortunately I've only vague idea of the system resources (memory size, number and speed of CPUs/cores) that such an "average Java EE application" for few hundred users needs. My rough and mostly unfounded estimate based on actual Amazon offerings is that 1.7GB and a single, 2-core "modern CPU" with speed around 2.5GHz (the High-CPU Medium Instance) should be sufficient for any of the two application servers (since we can handle higher load by provisioning more of them). Alternatively I would consider using the Large instance (64b, 7.5GB RAM, 2 cores at 1GHz) So my question is whether such a deployment to the cloud is technically and financially feasible or whether dedicated/VPS servers would be a better option and whether there are some real-world experiences with something similar. Thank you very much! /Jakub Holy PS: I've found the JBoss EAP in a Cloud Case Study that shows that it is possible to deploy a real-world Java EE application to the EC2 cloud but unfortunately there're no details regarding topology, instance types, or anything :-(

    Read the article

  • 30 Steps to Master ASP.NET MVC Application development

    - by Rajesh Pillai
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Welcome Readers!,   I am starting out a new series on ASP.NET  MVC skill building which will be posted over the next couple of weeks.  Let me know your thoughts on the content, which I have planned and a couple of them has been taken from ASP.NET MVC2 Cookbook. (NOTE: Only the heading has been taken, the content will be not :)).   Do let me know what you would like to see, or any additional inputs or ideas to cover in this topics.  The 30 steps are oultined below for quick reference.  Will start filling this out quickly.   Outlined is the ‘30’ step to master ASP.NET MVC.   A Peek Into Model What is a model? Different types of model Presentation/ViewModel Model Mapping (AutoMapper)   A Peak into View How view works in ASP.NET MVC? View Engine Design Custom View Engine View Best Practices Templated Helpers Partial Views   A Peak into Controller Introduction Controller Design Controller Best Practices Asynchronous Controller Custom Action Result Action Filters Controller Factory to use with IOC   Routes Explanation Routes from the database Routes from XML More complex routing   Master Pages Basics Setting Master Page Dynamically   Working with data in the view Repeating Views Array of check boxes Array of radio buttons Paged data CRUD Client side action Confirmation Dialog (modal window) jqGrid   Working with Forms   Validation Model Validation with DataAnnotations Using the xVal validation framework Client side validation with jQuery Validation Fluent Validation Model Binders   Templating Create strongly typed helper using T4 Custom View Templates with T4 Create custom MVC project template using T4   IOC AutoFac Ninject Unity Application   Areas   jQuery, Ajax and jQuery Plugins   State Maintenance Application State User state Cookies Webfarm   Error Handling View error handling Controller error handling ELMAH (Error Logging Modules and Handlers)   Authentication and Authorization User Registration form SignOn Process Password Reminder Membership and Roles Windows authentication Restricting access to all pages Restricting access to selected pages Restricting access to pages by role Restricting access to a controller Restricting access to selected area   Profiles and Themes Using Profiles Inheriting a Profile Migrating an anonymous profile Creating custom themes Using themes User personalized themes   Configuration Adding custom application settings in web.config Displaying custom error messages Accessing other web.config configuration elements Adding custom configuration elements to web.config Encrypting web.config sections   Tracing, Debugging and Logging   Caching Caching a whole page Caching pages based on route details Caching pages based on browser type and version Caching pages based custom strings Caching partial pages Caching application data Object Caching Using Microsoft Velocity Using MemCache Using AppFabric cache   Localization   HTTP Handlers and Modules   Security XSS/CSRF AnitForgery Encoding   HtmlHelpers Strongly typed helpers Writing custom helpers   Repository Pattern (Data access)   WF/WCF   Unit Testing   Mocking Framework   Integration Testing   Load / Performance Testing   Deployment    Once again let me know your thoughts on this.   Till then, Enjoy MVC'ing!!!

    Read the article

  • The Data Scientist

    - by BuckWoody
    A new term - well, perhaps not that new - has come up and I’m actually very excited about it. The term is Data Scientist, and since it’s new, it’s fairly undefined. I’ll explain what I think it means, and why I’m excited about it. In general, I’ve found the term deals at its most basic with analyzing data. Of course, we all do that, and the term itself in that definition is redundant. There is no science that I know of that does not work with analyzing lots of data. But the term seems to refer to more than the common practices of looking at data visually, putting it in a spreadsheet or report, or even using simple coding to examine data sets. The term Data Scientist (as far as I can make out this early in it’s use) is someone who has a strong understanding of data sources, relevance (statistical and otherwise) and processing methods as well as front-end displays of large sets of complicated data. Some - but not all - Business Intelligence professionals have these skills. In other cases, senior developers, database architects or others fill these needs, but in my experience, many lack the strong mathematical skills needed to make these choices properly. I’ve divided the knowledge base for someone that would wear this title into three large segments. It remains to be seen if a given Data Scientist would be responsible for knowing all these areas or would specialize. There are pretty high requirements on the math side, specifically in graduate-degree level statistics, but in my experience a company will only have a few of these folks, so they are expected to know quite a bit in each of these areas. Persistence The first area is finding, cleaning and storing the data. In some cases, no cleaning is done prior to storage - it’s just identified and the cleansing is done in a later step. This area is where the professional would be able to tell if a particular data set should be stored in a Relational Database Management System (RDBMS), across a set of key/value pair storage (NoSQL) or in a file system like HDFS (part of the Hadoop landscape) or other methods. Or do you examine the stream of data without storing it in another system at all? This is an important decision - it’s a foundation choice that deals not only with a lot of expense of purchasing systems or even using Cloud Computing (PaaS, SaaS or IaaS) to source it, but also the skillsets and other resources needed to care and feed the system for a long time. The Data Scientist sets something into motion that will probably outlast his or her career at a company or organization. Often these choices are made by senior developers, database administrators or architects in a company. But sometimes each of these has a certain bias towards making a decision one way or another. The Data Scientist would examine these choices in light of the data itself, starting perhaps even before the business requirements are created. The business may not even be aware of all the strategic and tactical data sources that they have access to. Processing Once the decision is made to store the data, the next set of decisions are based around how to process the data. An RDBMS scales well to a certain level, and provides a high degree of ACID compliance as well as offering a well-known set-based language to work with this data. In other cases, scale should be spread among multiple nodes (as in the case of Hadoop landscapes or NoSQL offerings) or even across a Cloud provider like Windows Azure Table Storage. In fact, in many cases - most of the ones I’m dealing with lately - the data should be split among multiple types of processing environments. This is a newer idea. Many data professionals simply pick a methodology (RDBMS with Star Schemas, NoSQL, etc.) and put all data there, regardless of its shape, processing needs and so on. A Data Scientist is familiar not only with the various processing methods, but how they work, so that they can choose the right one for a given need. This is a huge time commitment, hence the need for a dedicated title like this one. Presentation This is where the need for a Data Scientist is most often already being filled, sometimes with more or less success. The latest Business Intelligence systems are quite good at allowing you to create amazing graphics - but it’s the data behind the graphics that are the most important component of truly effective displays. This is where the mathematics requirement of the Data Scientist title is the most unforgiving. In fact, someone without a good foundation in statistics is not a good candidate for creating reports. Even a basic level of statistics can be dangerous. Anyone who works in analyzing data will tell you that there are multiple errors possible when data just seems right - and basic statistics bears out that you’re on the right track - that are only solvable when you understanding why the statistical formula works the way it does. And there are lots of ways of presenting data. Sometimes all you need is a “yes” or “no” answer that can only come after heavy analysis work. In that case, a simple e-mail might be all the reporting you need. In others, complex relationships and multiple components require a deep understanding of the various graphical methods of presenting data. Knowing which kind of chart, color, graphic or shape conveys a particular datum best is essential knowledge for the Data Scientist. Why I’m excited I love this area of study. I like math, stats, and computing technologies, but it goes beyond that. I love what data can do - how it can help an organization. I’ve been fortunate enough in my professional career these past two decades to work with lots of folks who perform this role at companies from aerospace to medical firms, from manufacturing to retail. Interestingly, the size of the company really isn’t germane here. I worked with one very small bio-tech (cryogenics) company that worked deeply with analysis of complex interrelated data. So  watch this space. No, I’m not leaving Azure or distributed computing or Microsoft. In fact, I think I’m perfectly situated to investigate this role further. We have a huge set of tools, from RDBMS to Hadoop to allow me to explore. And I’m happy to share what I learn along the way.

    Read the article

  • MEB Support to NetBackup MMS

    - by Hema Sridharan
    In MySQL Enterprise Backup 3.6, new option was introduced to support backup to tapes via SBT interface. SBT stands for System Backup to Tape, an Oracle API that helps to perform backup and restore jobs via media management software such as Oracle's Secure Backup (OSB). There are other storage managers like IBM's Tivoli Storage Manager (TSM) and Symantec's Netbackup (NB) which are also supported by MEB but we don't guarantee that it will function as expected for every release. MEB supports SBT API version 2.0 In this blog, I am primarily going to focus the interface of MEB and Symantec's NB. If we are using tapes for backup, ensure that tape library and tape drives are compatible. Test Setup 1. Install NB 7.5 master and media servers in Linux OS. ( NB 7.1 can also be used but for testing purpose I used NB 7.5)2. Install MEB 3.8 also in Linux OS.3. Install NB admin console in your windows desktop and configure the NB master server from there. Note: Ensure that you have root user permission to install NetBackup. Configuration Steps for MEB and NB Once MEB and NB are installed, Ensure that NB is linked to MEB by specifying the library /usr/openv/netbackup/bin/libobk.so64 in the mysqlbackup command line using --sbt-lib-path. Configure the NB master server from windows console. That is configure the storage units by specifying the Storage unit name, Disk type, Media Server name etc.  Create NetBackup policies that are user selectable. But please make sure that policy type is "Oracle".  Define the clients where MEB will be executed. Some times this will be different host where MEB is run or some times in same Media server where NB and tapes are attached. Now once the installation and configuration steps are performed for MEB and NB, the next part is the actual execution.MEB should be run as single file backup using --backup-image option with prefix sbt:(it is a tag which tells MEB that it should stream the backup image through the SBT interface) which is sent to NB client via SBT interface . The resulting backup image is stored where NB stores the images that it backs up. The following diagram shows how MEB interacts with MMS through SBT interface. Backup The following parameters should also be ready for the execution,    --sbt-lib-path : Path to SBT library specific to NetBackup MMS. SBT lib for NetBackup  is in /usr/openv/netbackup/bin/libobk.so64    --sbt-environment: Environment variables must be defined specific to NetBackup. In our example below, we use     NB_ORA_SERV=myserver.com,    NB_ORA_CLIENT=myserver.com,    NB_ORA_POLICY=NBU-MEB    ORACLE_HOME = /export/home2/tmp/hema/mysql-server/ ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --port=13000 --protocol=tcp --user=root --backup-image=sbt:bkpsbtNB --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64 --sbt-environment="NB_ORA_SERV=myserver.com, NB_ORA_CLIENT=myserver.com, NB_ORA_POLICY=NBU-MEB, ORACLE_HOME=/export/home2/tmp/hema/mysql-server/” --backup-dir=/export/home2/tmp/hema/MEB_bkdir/ backup-to-image ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Once backup is completed successfully, this should appear in Activity Monitor in NetBackup Console.For restore,  image contents has to be extracted using image-to-backup-dir command and then apply-log and copy-back steps are applied. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ./mysqlbackup --sbt-lib-path=/usr/openv/netbackup/bin/libobk.so64  --backup-dir=/export/home2/tmp/hema/NBMEB/ --backup-image=sbt:bkpsbtNB image-to-backup-dir-----------------------------------------------------------------------------------------------------------------------------------Now apply logs as usual, shutdown the server and perform restore, restart the server and check the data contents. ./mysqlbackup   ---backup-dir=/export/home2/tmp/hema/NBMEB/  apply-log ./mysqlbackup --datadir=/export/home2/tmp/hema/mysql-server/mysql-5.5-meb-repo/mysql-test/var/mysqld.1/data/  --backup-dir=/export/home2/tmp/hema/MEB_bkpdir/ innodb_log_files_in_group=2 --innodb_log_file_size=5M --user=root --port=13000 --protocol=tcp copy-back The NB console should show 'Restore" job as done. If you don't see that there is something wrong with MEB or NetBackup.You can also refer to more detailed steps of MEB and NB integration in whitepaper here

    Read the article

  • Healthcare and Distributed Data Don't Mix

    - by [email protected]
    How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

    Read the article

  • MacGyver Moments

    - by Geoff N. Hiten
    Denny Cherry tagged me to write about my best MacGyver Moment.  Usually I ignore blogosphere fluff and just use this space to write what I think is important.  However, #MVP10 just ended and I have a stronger sense of community.  Besides, where else would I mention my second best Macgyver moment was making a BIOS jumper out of a soda can.  Aluminum is conductive and I didn't have any real jumpers lying around. My best moment is probably my entire home computer network.  Every system but one is hand-built, usually cobbled together out of spare parts and 'adapted' from its original purpose. My Primary Domain Controller is a Dell 2300.   The Service Tag indicates it was shipped to the original owner in 1999.  Box has a PERC/1 RAID controller.  I acquired this from a previous employer for $50.  It runs Windows Server 2003 Enterprise Edition.  Does DNS, DHCP, and RADIUS services as a bonus.  RADIUS authentication is used for VPN and Wireless access.  It is nice to sign in once and be done with it. The Secondary Domain Controller is an old desktop.  Dual P-III 933 with some extra drives. My VPN box is a P-II 250 with 384MB of RAM and a 21 GB hard drive.  I did a P-to-V to my Hyper-V box a year or so ago and retired the hardware again.  Dynamic DNS lets me connect no matter how often Comcast shuffles my IP. The Hyper-V box is a desktop system with 8GB RAM and an AMD Athlon 5000+ processor.  Cost me less than $500 to put together nearly two years ago.  I reasoned that if Vista and Windows 2008 were the same code then Vista 64-bit certified meant the drivers for Vista would load into Windows 2008.  Turns out I was right. Later I added three 1TB drives but wasn't too happy with how that turned out.  I recovered two of the drives yesterday and am building an iSCSI storage unit. (Much thanks to Starwind.  Great product).  I am using an old AMD 1.1GhZ box with 1.5 GB RAM (cobbled together from three old PCs) as my storave server.  The Hyper-V box is slated for an OS rebuild to 2008 R2 once I get the storage system worked out.  maybe in a week or two. A couple of DLink Gigabit switches ties everything together. Add in the Vonage box, the three PCs, the Wireless-N Access Point, the two notebooks and the XBox and you have gone from MacGyver to darn near Rube Goldberg. The only thing I really spend money on is power supplies and fans.  I buy top-of-the-line for both. I even pull and crimp my own cables. Oh, and if my kids hose up a PC, I have all of their data on a server elsewhere.  Every PC and laptop is pretty much interchangable for email and basic workstation tasks.  That helps a lot too. Of course I will tag SQLVariant.

    Read the article

  • Why SQL Developer Rocks for the Advanced User Too

    - by thatjeffsmith
    While SQL Developer may be ‘perfect for Oracle beginners,’ that doesn’t preclude advanced and intermediate users from getting their fair share of toys! I’ve been working with Oracle since the 7.3.4 days, and I think it’s pretty safe to say that the WAY an ‘old timer’ uses a tool like SQL Developer is radically different than the ‘beginner.’ If you’ve been reluctant to use SQL Developer because it’s a GUI, give me a few minutes to try to convince you it’s worth a second (or third) look. 1. Help when you want it, and only when you want it One of the biggest gripes any user has with a piece of software is when said software can’t get out of it’s own way. When you’re typing in a word processor, sometimes you can do without the grammar and spelling checks, the offer to auto-complete your words, and all of the additional mark-up. This drives folks to programs like Notepad++ and vi. You can disable the code insight feature so you can type unmolested by SQL Developer’s attempt to auto-complete your object names. Now, if you happen to come across a long or hard to spell object name, you can still invoke the feature on demand using Ctrl+Spacebar Code Editor – Completion Insight – Enable Completion Auto-Popup (Keyword being Auto) 2. Automatic File Tracking SQL*Minus is nice. Vi is cool. Notepad++ has a lot of features I like. But not too many editors offer automatic logging of changes to your files without having to setup a source control system. I was doing some work on my login.sql. I’m not doing anything crazy, but seeing what I had done in previous iterations was helpful. Now imagine how nice it would be to have this available for your l,000+ line scripts! Track your scripts as they change, no setup required! 3. Extend the Functionality Know SQL and XML? Wish SQL Developer did JUST a little bit more? Build your own extensions. You can have custom context menus and object pages in just a few minutes. This is an example of lazy developers writing code that write code. 4. Get Your Money’s Worth You’ve licensed Enterprise Edition. You got your Diagnostic and Tuning packs. Now start using them! Not everyone has access to Enterprise Manager, especially developers. But that doesn’t mean they don’t need help with troubleshooting and optimizing poorly performing SQL statements. ASH, AWR, Real-Time SQL Monitoring and the SQL Tuning Advisor are built into the Reports and Worksheet. Yes you could make the package calls, but that’s a whole lot of typing, and I’d rather just get to the results. 5. Profile, Debug, & Unit Testing PLSQL An Interactive Development Environment (IDE) built by the same folks that own the programming language (Hello – Oracle PLSQL!) should be complete. It should ‘hug’ the developer and empower them to churn out programs that work, run fast, and are easy to maintain. Write it, test it, debug it, and tune it. When you’re running your programs and you just want to see the data that’s returned, that shouldn’t require any special settings or workaround to make it happen either. Magic! And a whole lot more… I could go on and talk about the support for things like DataPump, RMAN, and DBMS_SCHEDULER, but you’re experts and you’re plenty busy. If you think SQL Developer is falling short somewhere, I want you to let us know about it.

    Read the article

  • Implementing a modern web application with Web API on top of old services

    - by Gaui
    My company has many WCF services which may or may not be replaced in the near future. The old web application is written in WebForms and communicates straight with these services via SOAP and returns DataTables. Now I am designing a new modern web application in a modern style, an AngularJS client which communicates with an ASP.NET Web API via JSON. The Web API then communicates with the WCF services via SOAP. In the future I want to let the Web API handle all requests and go straight to the database, but because the business logic implemented in the WCF services is complicated it's going to take some time to rewrite and replace it. Now to the problem: I'm trying to make it easy in the near future to replace the WCF services with some other data storage, e.g. another endpoint, database or whatever. I also want to make it easy to unit test the business logic. That's why I have structured the Web API with a repository layer and a service layer. The repository layer has a straight communication with the data storage (WCF service, database, or whatever) and the service layer then uses the repository (Dependency Injection) to get the data. It doesn't care where it gets the data from. Later on I can be in control and structure the data returned from the data storage (DataTable to POCO) and be able to test the logic in the service layer with some mock repository (using Dependency Injection). Below is some code to explain where I'm going with this. But my question is, does this all make sense? Am I making this overly complicated and could this be simplified in any way possible? Does this simplicity make this too complicated to maintain? My main goal is to make it as easy as possible to switch to another data storage later on, e.g. an ORM and be able to test the logic in the service layer. And because the majority of the business logic is implemented in these WCF services (and they return DataTables), I want to be in control of the data and the structure returned to the client. Any advice is greatly appreciated. Update 20/08/14 I created a repository factory, so services would all share repositories. Now it's easy to mock a repository, add it to the factory and create a provider using that factory. Any advice is much appreciated. I want to know if I'm making things more complicated than they should be. So it looks like this: 1. Repository Factory public class RepositoryFactory { private Dictionary<Type, IServiceRepository> repositories; public RepositoryFactory() { this.repositories = new Dictionary<Type, IServiceRepository>(); } public void AddRepository<T>(IServiceRepository repo) where T : class { if (this.repositories.ContainsKey(typeof(T))) { this.repositories.Remove(typeof(T)); } this.repositories.Add(typeof(T), repo); } public dynamic GetRepository<T>() { if (this.repositories.ContainsKey(typeof(T))) { return this.repositories[typeof(T)]; } throw new RepositoryNotFoundException("No repository found for " + typeof(T).Name); } } I'm not very fond of dynamic but I don't know how to retrieve that repository otherwise. 2. Repository and service // Service repository interface // All repository interfaces extend this public interface IServiceRepository { } // Invoice repository interface // Makes it easy to mock the repository later on public interface IInvoiceServiceRepository : IServiceRepository { List<Invoice> GetInvoices(); } // Invoice repository // Connects to some data storage to retrieve invoices public class InvoiceServiceRepository : IInvoiceServiceRepository { public List<Invoice> GetInvoices() { // Get the invoices from somewhere // This could be a WCF, a database, or whatever using(InvoiceServiceClient proxy = new InvoiceServiceClient()) { return proxy.GetInvoices(); } } } // Invoice service // Service that handles talking to a real or a mock repository public class InvoiceService { // Repository factory RepositoryFactory repoFactory; // Default constructor // Default connects to the real repository public InvoiceService(RepositoryFactory repo) { repoFactory = repo; } // Service function that gets all invoices from some repository (mock or real) public List<Invoice> GetInvoices() { // Query the repository return repoFactory.GetRepository<IInvoiceServiceRepository>().GetInvoices(); } }

    Read the article

  • Kernel oops on Linux running in VirtualBox breaks some IO-related functionality on the server

    - by Kristoffer E
    We are having problems with CentOS release 6.3 running in VirtualBox on Windows 7 machines. The symptoms are the following: Everything works as normal for several hours, even days. Then something happens which breaks the system. What we still can do after this something happens: Access the web server Use existing SSH sessions to run top and free What does not work: Starting new SSH sessions (hangs after username and password is entered) Running ls in existing SSH sessions (hangs) SSI includes from our web servers that fetch data from remote machines probably more What we see on the server when this something happens is the following: Load average go from basically nothing to around 3 CPU usage is still low (5%) Disk activity is low (running iostat) Plenty of memory available Plenty of disk space available In /var/log/messages we get the following: Jun 14 01:10:48 devvm kernel: e1000 0000:00:03.0: eth0: Detected Tx Unit Hang Jun 14 01:10:48 devvm kernel: Tx Queue <0> Jun 14 01:10:48 devvm kernel: TDH <2e> Jun 14 01:10:48 devvm kernel: TDT <30> Jun 14 01:10:48 devvm kernel: next_to_use <30> Jun 14 01:10:48 devvm kernel: next_to_clean <2e> Jun 14 01:10:48 devvm kernel: buffer_info[next_to_clean] Jun 14 01:10:48 devvm kernel: time_stamp <1038284db> Jun 14 01:10:48 devvm kernel: next_to_watch <2f> Jun 14 01:10:48 devvm kernel: jiffies <103828b42> Jun 14 01:10:48 devvm kernel: next_to_watch.status <0> Jun 14 01:10:50 devvm kernel: e1000 0000:00:03.0: eth0: Detected Tx Unit Hang Jun 14 01:10:50 devvm kernel: Tx Queue <0> Jun 14 01:10:50 devvm kernel: TDH <2e> Jun 14 01:10:50 devvm kernel: TDT <30> Jun 14 01:10:50 devvm kernel: next_to_use <30> Jun 14 01:10:50 devvm kernel: next_to_clean <2e> Jun 14 01:10:50 devvm kernel: buffer_info[next_to_clean] Jun 14 01:10:50 devvm kernel: time_stamp <1038284db> Jun 14 01:10:50 devvm kernel: next_to_watch <2f> Jun 14 01:10:50 devvm kernel: jiffies <103829312> Jun 14 01:10:50 devvm kernel: next_to_watch.status <0> Jun 14 01:10:52 devvm kernel: ------------[ cut here ]------------ Jun 14 01:10:52 devvm kernel: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) Jun 14 01:10:52 devvm kernel: Hardware name: VirtualBox Jun 14 01:10:52 devvm kernel: NETDEV WATCHDOG: eth0 (e1000): transmit queue 0 timed out Jun 14 01:10:52 devvm kernel: Modules linked in: vboxsf(U) ipv6 ppdev parport_pc parport microcode sg vboxguest(U) i2c_piix4 i2c_core e1000 snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc pcnet32 mii ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Jun 14 01:10:52 devvm kernel: Pid: 0, comm: swapper Not tainted 2.6.32-279.el6.x86_64 #1 Jun 14 01:10:52 devvm kernel: Call Trace: Jun 14 01:10:52 devvm kernel: <IRQ> [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 Jun 14 01:10:52 devvm kernel: [<ffffffff8106b836>] ? warn_slowpath_fmt+0x46/0x50 Jun 14 01:10:52 devvm kernel: [<ffffffff814595fd>] ? dev_watchdog+0x26d/0x280 Jun 14 01:10:52 devvm kernel: [<ffffffff81099138>] ? sched_clock_cpu+0xb8/0x110 Jun 14 01:10:52 devvm kernel: [<ffffffff81459390>] ? dev_watchdog+0x0/0x280 Jun 14 01:10:52 devvm kernel: [<ffffffff8107e897>] ? run_timer_softirq+0x197/0x340 Jun 14 01:10:52 devvm kernel: [<ffffffff810a21c0>] ? tick_sched_timer+0x0/0xc0 Jun 14 01:10:52 devvm kernel: [<ffffffff8102b40d>] ? lapic_next_event+0x1d/0x30 Jun 14 01:10:52 devvm kernel: [<ffffffff81073ec1>] ? __do_softirq+0xc1/0x1e0 Jun 14 01:10:52 devvm kernel: [<ffffffff81096c50>] ? hrtimer_interrupt+0x140/0x250 Jun 14 01:10:52 devvm kernel: [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 Jun 14 01:10:52 devvm kernel: [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 Jun 14 01:10:52 devvm kernel: [<ffffffff81073ca5>] ? irq_exit+0x85/0x90 Jun 14 01:10:52 devvm kernel: [<ffffffff81505be0>] ? smp_apic_timer_interrupt+0x70/0x9b Jun 14 01:10:52 devvm kernel: [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 Jun 14 01:10:52 devvm kernel: <EOI> [<ffffffff810387cb>] ? native_safe_halt+0xb/0x10 Jun 14 01:10:52 devvm kernel: [<ffffffff810149cd>] ? default_idle+0x4d/0xb0 Jun 14 01:10:52 devvm kernel: [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 Jun 14 01:10:52 devvm kernel: [<ffffffff814e433a>] ? rest_init+0x7a/0x80 Jun 14 01:10:52 devvm kernel: [<ffffffff81c21f7b>] ? start_kernel+0x424/0x430 Jun 14 01:10:52 devvm kernel: [<ffffffff81c2133a>] ? x86_64_start_reservations+0x125/0x129 Jun 14 01:10:52 devvm kernel: [<ffffffff81c21438>] ? x86_64_start_kernel+0xfa/0x109 Jun 14 01:10:52 devvm kernel: ---[ end trace 2c7bb984812cf120 ]--- Jun 14 01:10:52 devvm kernel: e1000 0000:00:03.0: eth0: Reset adapter Jun 14 01:10:53 devvm abrtd: Directory 'oops-2013-06-14-01:10:53-1537-0' creation detected Jun 14 01:10:53 devvm abrt-dump-oops: Reported 1 kernel oopses to Abrt Jun 14 01:10:53 devvm abrtd: Can't open file '/var/spool/abrt/oops-2013-06-14-01:10:53-1537-0/uid': No such file or directory Jun 14 01:10:55 devvm kernel: Bridge firewalling registered After this we see for a while, every two minutes: Jun 14 01:14:22 devvm kernel: INFO: task events/0:19 blocked for more than 120 seconds. Jun 14 01:14:22 devvm kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jun 14 01:14:22 devvm kernel: events/0 D 0000000000000000 0 19 2 0x00000000 Jun 14 01:14:22 devvm kernel: ffff880116c4fb90 0000000000000046 00000000ffffffff 0000000000000008 Jun 14 01:14:22 devvm kernel: 0000000000016680 0000000000016680 ffff880028210400 0000000000016680 Jun 14 01:14:22 devvm kernel: ffff880116c4daf8 ffff880116c4ffd8 000000000000fb88 ffff880116c4daf8 Jun 14 01:14:22 devvm kernel: Call Trace: Jun 14 01:14:22 devvm kernel: [<ffffffff8105b483>] ? perf_event_task_sched_out+0x33/0x80 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100975d>] ? __switch_to+0x13d/0x320 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe323>] wait_for_common+0x123/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff81060250>] ? default_wake_function+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d093>] __cancel_work_timer+0x1b3/0x1e0 Jun 14 01:14:22 devvm kernel: [<ffffffff8108cbe0>] ? wq_barrier_func+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d0f0>] cancel_work_sync+0x10/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffffa01c5ca5>] e1000_down_and_stop+0x25/0x50 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cb695>] e1000_down+0x155/0x200 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cbcb0>] ? e1000_reset_task+0x0/0xe0 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffffa01cbd1e>] e1000_reset_task+0x6e/0xe0 [e1000] Jun 14 01:14:22 devvm kernel: [<ffffffff8108c760>] worker_thread+0x170/0x2a0 Jun 14 01:14:22 devvm kernel: [<ffffffff810920d0>] ? autoremove_wake_function+0x0/0x40 Jun 14 01:14:22 devvm kernel: [<ffffffff8108c5f0>] ? worker_thread+0x0/0x2a0 Jun 14 01:14:22 devvm kernel: [<ffffffff81091d66>] kthread+0x96/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100c14a>] child_rip+0xa/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff81091cd0>] ? kthread+0x0/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100c140>] ? child_rip+0x0/0x20 Jun 14 01:14:22 devvm kernel: INFO: task parted:8069 blocked for more than 120 seconds. Jun 14 01:14:22 devvm kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Jun 14 01:14:22 devvm kernel: parted D 0000000000000003 0 8069 7994 0x00000080 Jun 14 01:14:22 devvm kernel: ffff8800908b3bb8 0000000000000082 0000000000000000 ffff88010ab50080 Jun 14 01:14:22 devvm kernel: ffff880116c7d500 0000000000000001 0000000000000000 0000000000000000 Jun 14 01:14:22 devvm kernel: ffff88010ab50638 ffff8800908b3fd8 000000000000fb88 ffff88010ab50638 Jun 14 01:14:22 devvm kernel: Call Trace: Jun 14 01:14:22 devvm kernel: [<ffffffff814fe6a5>] schedule_timeout+0x215/0x2e0 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe323>] wait_for_common+0x123/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff81060250>] ? default_wake_function+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8112b6d0>] ? lru_add_drain_per_cpu+0x0/0x10 Jun 14 01:14:22 devvm kernel: [<ffffffff814fe43d>] wait_for_completion+0x1d/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d177>] flush_work+0x77/0xc0 Jun 14 01:14:22 devvm kernel: [<ffffffff8108cbe0>] ? wq_barrier_func+0x0/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff8108d2f3>] schedule_on_each_cpu+0x133/0x180 Jun 14 01:14:22 devvm kernel: [<ffffffff811ad440>] ? invalidate_bh_lru+0x0/0x50 Jun 14 01:14:22 devvm kernel: [<ffffffff8112ae35>] lru_add_drain_all+0x15/0x20 Jun 14 01:14:22 devvm kernel: [<ffffffff811adf6a>] invalidate_bdev+0x2a/0x50 Jun 14 01:14:22 devvm kernel: [<ffffffff8125e9a4>] blkdev_ioctl+0x3b4/0x6e0 Jun 14 01:14:22 devvm kernel: [<ffffffff811b381c>] block_ioctl+0x3c/0x40 Jun 14 01:14:22 devvm kernel: [<ffffffff8118dec2>] vfs_ioctl+0x22/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8118e064>] do_vfs_ioctl+0x84/0x580 Jun 14 01:14:22 devvm kernel: [<ffffffff8118e5e1>] sys_ioctl+0x81/0xa0 Jun 14 01:14:22 devvm kernel: [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b In /var/spool/abrt/oops-2013-06-14-01:10:53-1537-0 we can see the following information: In backtrace: WARNING: at net/sched/sch_generic.c:261 dev_watchdog+0x26d/0x280() (Not tainted) Hardware name: VirtualBox NETDEV WATCHDOG: eth0 (e1000): transmit queue 0 timed out Modules linked in: vboxsf(U) ipv6 ppdev parport_pc parport microcode sg vboxguest(U) i2c_piix4 i2c_core e1000 snd_intel8x0 snd_ac97_codec ac97_bus snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc pcnet32 mii ext4 mbcache jbd2 sd_mod crc_t10dif ahci dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Not tainted 2.6.32-279.el6.x86_64 #1 Call Trace: <IRQ> [<ffffffff8106b747>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b836>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff814595fd>] ? dev_watchdog+0x26d/0x280 [<ffffffff81099138>] ? sched_clock_cpu+0xb8/0x110 [<ffffffff81459390>] ? dev_watchdog+0x0/0x280 [<ffffffff8107e897>] ? run_timer_softirq+0x197/0x340 [<ffffffff810a21c0>] ? tick_sched_timer+0x0/0xc0 [<ffffffff8102b40d>] ? lapic_next_event+0x1d/0x30 [<ffffffff81073ec1>] ? __do_softirq+0xc1/0x1e0 [<ffffffff81096c50>] ? hrtimer_interrupt+0x140/0x250 [<ffffffff8100c24c>] ? call_softirq+0x1c/0x30 [<ffffffff8100de85>] ? do_softirq+0x65/0xa0 [<ffffffff81073ca5>] ? irq_exit+0x85/0x90 [<ffffffff81505be0>] ? smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8100bc13>] ? apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff810387cb>] ? native_safe_halt+0xb/0x10 [<ffffffff810149cd>] ? default_idle+0x4d/0xb0 [<ffffffff81009e06>] ? cpu_idle+0xb6/0x110 [<ffffffff814e433a>] ? rest_init+0x7a/0x80 [<ffffffff81c21f7b>] ? start_kernel+0x424/0x430 [<ffffffff81c2133a>] ? x86_64_start_reservations+0x125/0x129 [<ffffffff81c21438>] ? x86_64_start_kernel+0xfa/0x109 In cmdline: ro root=/dev/mapper/vg_01-lv_root rd_NO_LUKS LANG=en_US.UTF-8 KEYBOARDTYPE=pc KEYTABLE=sv-latin1 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_01/lv_root crashkernel=129M@0M rhgb quiet rd_LVM_LV=vg_01/lv_swap rd_NO_DM rhgb quie Additional information: # uname -a Linux devvm 2.6.32-279.el6.x86_64 #1 SMP Fri Jun 22 12:19:21 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/redhat-release CentOS release 6.3 (Final) VirtualBox version 4.2.6. Any insight in how we can proceed with troubleshooting this is appreciated. If you need more information, just let me know.

    Read the article

  • Securing Flexfield Value Sets in EBS 12.2

    - by Sara Woodhull
    Release 12.2 includes a new feature: flexfield value set security. This new feature gives you additional options for ensuring that different administrators have non-overlapping responsibilities, which in turn provides checks and balances for sensitive activities.  Separation of Duties (SoD) is one of the key concepts of internal controls and is a requirement for many regulations including: Sarbanes-Oxley (SOX) Act Health Insurance Portability and Accountability Act (HIPAA) European Union Data Protection Directive. Its primary intent is to put barriers in place to prevent fraud or theft by an individual acting alone. Implementing Separation of Duties requires minimizing the possibility that users could modify data across application functions where the users should not normally have access. For flexfields and report parameters in Oracle E-Business Suite, values in value sets can affect functionality such as the rollup of accounting data, job grades used at a company, and so on. Controlling access to the creation or modification of value set values can be an important piece of implementing Separation of Duties in an organization. New Flexfield Value Set Security feature Flexfield value set security allows system administrators to restrict users from viewing, adding or updating values in specific value sets. Value set security enables role-based separation of duties for key flexfields, descriptive flexfields, and report parameters. For example, you can set up value set security such that certain users can view or insert values for any value set used by the Accounting Flexfield but no other value sets, while other users can view and update values for value sets used for any flexfields in Oracle HRMS. You can also segregate access by Operating Unit as well as by role or responsibility.Value set security uses a combination of data security and role-based access control in Oracle User Management. Flexfield value set security provides a level of security that is different from the previously-existing and similarly-named features in Oracle E-Business Suite: Function security controls whether a user has access to a specific page or form, as well as what operations the user can do in that screen. Flexfield value security controls what values a user can enter into a flexfield segment or report parameter (by responsibility) during routine data entry in many transaction screens across Oracle E-Business Suite. Flexfield value set security (this feature, new in Release 12.2) controls who can view, insert, or update values for a particular value set (by flexfield, report, or value set) in the Segment Values form (FNDFFMSV). The effect of flexfield value set security is that a user of the Segment Values form will only be able to view those value sets for which the user has been granted access. Further, the user will be able to insert or update/disable values in that value set if the user has been granted privileges to do so.  Flexfield value set security affects independent, dependent, and certain table-validated value sets for flexfields and report parameters. Initial State of the Feature upon Upgrade Because this is a new security feature, it is turned on by default.  When you initially install or upgrade to Release 12.2.2, no users are allowed to view, insert or update any value set values (users may even think that their values are missing or invalid because they cannot see the values).  You must explicitly set up access for specific users by enabling appropriate grants and roles for those users.We recommend using flexfield value set security as part of a comprehensive Separation of Duties strategy. However, if you choose not to implement flexfield value set security upon upgrading to or installing Release 12.2, you can enable backwards compatibility--users can access any value sets if they have access to the Values form--after you upgrade. The feature does not affect day-to-day transactions that use flexfields.  However, you must either set up specific grants and roles or enable backwards compatibility before users can create new values or update or disable existing values. For more information, see: Release 12.2 Flexfield Value Set Security Documentation Update for Patch 17305947:R12.FND.C (Document 1589204.1) R12.2 TOI: Implement and Use Application Object Library (AOL) - Flexfields Security and Separation of Duties for Value Sets (recorded training)

    Read the article

  • The SmartAssembly Rearchitecture

    - by Simon Cooper
    You may have noticed that not a lot has happened to SmartAssembly in the past few months. However, the team has been very busy behind the scenes working on an entirely new version of SmartAssembly. SmartAssembly 6.5 Over the past few releases of SmartAssembly, the team had come to the realisation that the current 'architecture' - grown organically, way before RedGate bought it, from a simple name obfuscator over the years into a full-featured obfuscator and assembly instrumentation tool - was simply not up to the task. Not for what we wanted to do with it at the time, and not what we have planned for the future. Not only was it not up to what we wanted it to do, but it was severely limiting our development capabilities; long-standing bugs in the root architecture that couldn't be fixed, some rather...interesting...design decisions, and convoluted logic that increased the complexity of any bugfix or new feature tenfold. So, we set out to fix this. Earlier this year, a new engine was written on which SmartAssembly would be based. Over the following few months, each feature was ported over to the new engine and extensively tested by our existing unit and integration tests. The engine was linked into the existing UI (no easy task, due to the tight coupling between the UI and old engine), and existing RedGate products were tested on the new SmartAssembly to ensure the new engine acted in the same way. The result is SmartAssembly 6.5. The risks of a rearchitecture Are there risks to rearchitecting a product like SmartAssembly? Of course. There was a lot of undocumented behaviour in the old engine, and as part of the rearchitecture we had to find this behaviour, define it, and document it. In the process we found some behaviour of the old engine that simply did not make sense; hence the changes in pruning & obfuscation behaviour in the release notes. All the special edge cases we had to find, document, and re-implement. There was a chance that these special cases would not be found until near the end of the project, when everything is functionally complete and interacting together. By that stage, it would be hard to go back and change anything without a whole lot of extra work, delaying the release by months. We always knew this was a possibility; our initial estimate of the time required was '4 months, ± 4 months'. And that was including various mitigation strategies to reduce the likelihood of these issues being found right at the end. Fortunately, this worst-case did not happen. However, the rearchitecture did produce some benefits. As well as numerous bug fixes that we could not fix any other way, we've also added logging that lets you find out exactly why a particular field or property wasn't pruned or obfuscated. There's a new command line interface, we've tested it with WP7.1 and Silverlight 5, and we've added a new option to error reporting to improve the performance of instrumented apps by ~10%, at the cost of inaccurate line numbers in reports. So? What differences will I see? Largely none. SmartAssembly 6.5 produces the same output as SmartAssembly 6.2. The performance of 6.5 will be much faster for some users, and generally the same as 6.2 for the remaining. If you've encountered a bug with previous versions of SmartAssembly, I encourage you to try 6.5, as it has most likely been fixed in the rearchitecture. If you encounter a bug with 6.5, please do tell us; we'll be doing another release quite soon, so we'll aim to fix any issues caused by 6.5 in that release. Most importantly, the new architecture finally allows us to implement some Big Things with SmartAssembly we've been planning for many months; these will fundamentally change how you build, release and monitor your application. Stay tuned for further updates!

    Read the article

  • maintaining a growing, diverse codebase with continuous integration

    - by Nate
    I am in need of some help with philosophy and design of a continuous integration setup. Our current CI setup uses buildbot. When I started out designing it, I inherited (well, not strictly, as I was involved in its design a year earlier) a bespoke CI builder that was tailored to run the entire build at once, overnight. After a while, we decided that this was insufficient, and started exploring different CI frameworks, eventually choosing buildbot. One of my goals in transitioning to buildbot (besides getting to enjoy all the whiz-bang extras) was to overcome some of the inadequacies of our bespoke nightly builder. Humor me for a moment, and let me explain what I have inherited. The codebase for my company is almost 150 unique c++ Windows applications, each of which has dependencies on one or more of a dozen internal libraries (and many on 3rd party libraries as well). Some of these libraries are interdependent, and have depending applications that (while they have nothing to do with each other) have to be built with the same build of that library. Half of these applications and libraries are considered "legacy" and unportable, and must be built with several distinct configurations of the IBM compiler (for which I have written unique subclasses of Compile), and the other half are built with visual studio. The code for each compiler is stored in two separate Visual SourceSafe repositories (which I am simply handling using a bunch of ShellCommands, as there is no support for VSS). Our original nightly builder simply took down the source for everything, and built stuff in a certain order. There was no way to build only a single application, or pick a revision, or to group things. It would launched virtual machines to build a number of the applications. It wasn't very robust, it wasn't distributable. It wasn't terribly extensible. I wanted to be able to overcame all of these limitations in buildbot. The way I did this originally was to create entries for each of the applications we wanted to build (all 150ish of them), then create triggered schedulers that could build various applications as groups, and then subsume those groups under an overall nightly build scheduler. These could run on dedicated slaves (no more virtual machine chicanery), and if I wanted I could simply add new slaves. Now, if we want to do a full build out of schedule, it's one click, but we can also build just one application should we so desire. There are four weaknesses of this approach, however. One is our source tree's complex web of dependencies. In order to simplify config maintenace, all builders are generated from a large dictionary. The dependencies are retrieved and built in a not-terribly robust fashion (namely, keying off of certain things in my build-target dictionary). The second is that each build has between 15 and 21 build steps, which is hard to browse and look at in the web interface, and since there are around 150 columns, takes forever to load (think from 30 seconds to multiple minutes). Thirdly, we no longer have autodiscovery of build targets (although, as much as one of my coworkers harps on me about this, I don't see what it got us in the first place). Finally, aformentioned coworker likes to constantly bring up the fact that we can no longer perform a full build on our local machine (though I never saw what that got us, either, considering that it took three times as long as the distributed build; I think he is just paranoically phobic of ever breaking the build). Now, moving to new development, we are starting to use g++ and subversion (not porting the old repository, mind you - just for the new stuff). Also, we are starting to do more unit testing ("more" might give the wrong picture... it's more like any), and integration testing (using python). I'm having a hard time figuring out how to fit these into my existing configuration. So, where have I gone wrong philosophically here? How can I best proceed forward (with buildbot - it's the only piece of the puzzle I have license to work on) so that my configuration is actually maintainable? How do I address some of my design's weaknesses? What really works in terms of CI strategies for large, (possibly over-)complex codebases?

    Read the article

  • NHibernate 3.0 and FluentNHibernate, how to get up and running&hellip;.

    - by DesigningCode
    First up. Its actually really easy. I’m not very religious about my DB tech, I don’t really care, I just want something that works.  So I’m happy to consider all options if they provide an advantage, and recently I was considering jumping from NHibernate to EF 4.0.  However before ditching NHibernate and jumping to EF 4.0 I thought I should try the head version of NHibernates trunk and the Head version of FluentNHibernate. I currently have a “Repository / Unit of Work” Framework built up around these two techs.  All up it makes my life pretty simple for dealing with databases.   The problem is the current release of NHibernate + the Linq provider wasn’t too hot for our purposes.  Especially trying to plug it into older VB.NET code.   The Linq provider spat the dummy with VB.NET lambdas.  Mainly because in C# Query().Where(l => l.Name.Contains("x") || l.Name.Contains("y")).ToList(); is not the same as the VB.NET Query().Where(Function(l) l.Name.Contains("x") Or l.Name.Contains("y")).ToList VB.NET seems to spit out … well…. something different :-) so anyways… Compiling your own version of NHibernate and FluentNHibernate.  It’s actually pretty easy! First you’ll need to install tortisesvn NAnt and Git if you don’t already have them.  NHibernate first step, get the subversion trunk https://nhibernate.svn.sourceforge.net/svnroot/nhibernate/trunk/ into a directory somewhere.  eg \thirdparty\nhibernate Then use NAnt to build it.   (if you open the .sln it will show errors in that  AssemblyInfo.cs doesn’t exist ) to build it, there is a .txt document with sample command line build instructions,  I simply used :- NAnt -D:project.config=release clean build >output-release-build.log *wait* *wait* *wait* and ta da, you will have a bin directory with all the release dlls. FluentNHibernate This was pretty simple. there’s instructions here :- http://wiki.fluentnhibernate.org/Getting_started#Installation basically, with git, create a directory, and you issue the command git clone git://github.com/jagregory/fluent-nhibernate.git and wait, and soon enough you have the source. Now, from the bin directory that NHibernate spit out, take everything and dump it into the subdirectory “fluent-nhibernate\tools\NHibernate” Now, to build, you can use rake….which a ruby build system, however you can also just open the solution and build.   Which is what I did.  I had a few problems with the references which I simply re-added using the new ones.  Once built, I just took all the NHibnerate dlls, and the fluent ones and replaced my existing NHibernate / Fluent and killed off the old linq project. All I had to change is the places that used  .Linq<T>  and replace them with .Query<T>  (which was easy as I had wrapped it already to isolate my code from such changes) and hey presto, everything worked.  Even the VB.NET linq calls. I need to do some more testing as I’ve only done basic smoke tests, but its all looking pretty good, so for now, I will stick to NHibernate!

    Read the article

  • Code Contracts: validating arrays and collections

    - by DigiMortal
    Validating collections before using them is very common task when we use built-in generic types for our collections. In this posting I will show you how to validate collections using code contracts. It is cool how much awful looking code you can avoid using code contracts. Failing code Let’s suppose we have method that calculates sum of all invoices in collection. We have class Invoice and one of properties it has is Sum. I don’t introduce here any complex calculations on invoices because we have another problem to solve in this topic. Here is our code. public static decimal CalculateTotal(IList<Invoice> invoices) {     var sum = invoices.Sum(p => p.Sum);     return sum; } This method is very simple but it fails when invoices list contains at least one null. Of course, we can test if invoice is null but having nulls in lists like this is not good idea – it opens green way for different coding bugs in system. Our goal is to react to bugs ASAP at the nearest place they occur. There is one more way how to make our method fail. It happens when invoices is null. I thing it is also one common bugs during development and it even happens in production environments under some conditions that are usually hardly met. Now let’s protect our little calculation method with code contracts. We need two contracts: invoices cannot be null invoices cannot contain any nulls Our first contract is easy but how to write the second one? Solution: Contract.ForAll Preconditions in code are checked using Contract.Ensures method. This method takes boolean value as argument that sais if contract holds or not. There is also method Contract.ForAll that takes collection and predicate that must hold for that collection. Nice thing is ForAll returns boolean. So, we have very simple solution. public static decimal CalculateTotal(IList<Invoice> invoices) {     Contract.Requires(invoices != null);     Contract.Requires(Contract.ForAll<Invoice>(invoices, p => p != null));       var sum = invoices.Sum(p => p.Sum);     return sum; } And here are some lines of code you can use to test the contracts quickly. var invoices = new List<Invoice>(); invoices.Add(new Invoice()); invoices.Add(null); invoices.Add(new Invoice()); //CalculateTotal(null); CalculateTotal(invoices); If your code is covered with unit tests then I suggest you to write tests to check that these contracts hold for every code run. Conclusion Although it seemed at first place that checking all elements in collection may end up with for-loops that does not look so nice we were able to solve our problem nicely. ForAll method of contract class offered us simple mechanism to check collections and it does it smoothly the code-contracts-way. P.S. I suggest you also read devlicio.us blog posting Validating Collections with Code Contracts by Derik Whittaker.

    Read the article

  • Thoughts on C# Extension Methods

    - by Damon
    I'm not a huge fan of extension methods.  When they first came out, I remember seeing a method on an object that was fairly useful, but when I went to use it another piece of code that method wasn't available.  Turns out it was an extension method and I hadn't included the appropriate assembly and imports statement in my code to use it.  I remember being a bit confused at first about how the heck that could happen (hey, extension methods were new, cut me some slack) and it took a bit of time to track down exactly what it was that I needed to include to get that method back.  I just imagined a new developer trying to figure out why a method was missing and fruitlessly searching on MSDN for a method that didn't exist and it just didn't sit well with me. I am of the opinion that if you have an object, then you shouldn't have to include additional assemblies to get additional instance level methods out of that object.  That opinion applies to namespaces as well - I do not like it when the contents of a namespace are split out into multiple assemblies.  I prefer to have static utility classes instead of extension methods to keep things nicely packaged into a cohesive unit.  It also makes it abundantly clear where utility methods are used in code.  I will concede, however, that it can make code a bit more verbose and lengthy.  There is always a trade-off. Some people harp on extension methods because it breaks the tenants of object oriented development and allows you to add methods to sealed classes.  Whatever.  Extension methods are just utility methods that you can tack onto an object after the fact.  Extension methods do not give you any more access to an object than the developer of that object allows, so I say that those who cry OO foul on extension methods really don't have much of an argument on which to stand.  In fact, I have to concede that my dislike of them is really more about style than anything of great substance. One interesting thing that I found regarding extension methods is that you can call them on null objects. Take a look at this extension method: namespace ExtensionMethods {   public static class StringUtility   {     public static int WordCount(this string str)     {       if(str == null) return 0;       return str.Split(new char[] { ' ', '.', '?' },         StringSplitOptions.RemoveEmptyEntries).Length;     }   }   } Notice that the extension method checks to see if the incoming string parameter is null.  I was worried that the runtime would perform a check on the object instance to make sure it was not null before calling an extension method, but that is apparently not the case.  So, if you call the following code it runs just fine. string s = null; int words = s.WordCount(); I am a big fan of things working, but this seems to go against everything I've come to know about instance level methods.  However, an extension method is really a static method masquerading as an instance-level method, so I suppose it would be far more frustrating if it failed since there is really no reason it shouldn't succeed. Although I'm not a fan of extension methods, I will say that if you ever find yourself at an impasse with a die-hard fan of either the utility class or extension method approach, then there is a common ground.  Extension methods are defined in static classes, and you call them from those static classes as well as directly from the objects they extend.  So if you build your utility classes using extension methods, then you can have it your way and they can have it theirs. 

    Read the article

  • Thoughts on ODTUG Kscope12

    - by thatjeffsmith
    The rodeo rocked! This wasn’t my first rodeo, and it wasn’t my first Kscope, but it was probably my favorite one. What is Kscope? It’s the annual conference for the Oracle Development Tools User Group. 1,000+ attendees from 20+ countries with an average Jeff Klout score of 65. I just made that metric and score up, but this conference attracts the best and brightest in the Oracle database space. I’m not just talking about the speakers either. The attendees are all top notch. They actively participate in sessions, make an effort to get to know their fellow conference mates, and often turn into volunteers and speakers. Developers that enjoy unit testing, understand the importance of modeling your data, and are eager to understand the Oracle CBO – these are traits that describe the ‘average’ ODTUG developer. 2012′s event was held in San Antonio. Yes, it was very hot. But this might have been the nicest Marriott property I’ve ever visited, and I’ve stayed at some nice ones in Hawaii and St. Thomas. They had free WiFi everywhere – the rooms, the Conference Center, the lobby, bars, everywhere. And it worked. The after hours events were very fun. I embarrassed myself several times, but that’s OK. The rodeo was an awesome event and the Thirsty Games experience was something I hope does not make it onto YouTube or Facebook — talking to you Chet Justice. I finally got to meet and spend some time with some folks I’ve always wanted to get to know better, @timothyjgorman, @alexgorbachev, @lj_dobson, @dschleis, @kentGraziano, @chriscmuir, @GaloBalda, @patch72, and many, many more! I even made some new friends thanks to the Mentor program and @carol_finn. 2013′s event will be in New Orleans. If you haven’t joined ODTUG or haven’t made it to Kscope, go ahead and mark your calendars. I had 3 presentations this year. Sunday’s was not a good performance, and I want to apologize to anyone who was there and was hoping for more. My Tips and Debugging sessions on Monday and Tuesday were more to my liking, and I enjoyed them as a presenter. I hope you enjoyed them as an attendee. I understand that my slidedecks were corrupted on the ODTUG site, and I’m working with the coordinator now to get those fixed ASAP. Apparently the 2 most well-received Tips was the /*CSV*/ formatting hint and recalling your previous SQL history via the keyboard. I’ll be doing a follow-up webinar with ODTUG in a few weeks for those members that weren’t able to see my Tips and Debugger sessions in San Antonio. I’ll be sure to post details on that here when I have the details. My next scheduled conference is Oracle Open World, and I may have a couple of shows after that to round out 2012.

    Read the article

  • From J2EE to Java EE: what has changed?

    - by Bruno.Borges
    See original @Java_EE tweet on 29 May 2014 Yeap, it has been 8 years since the term J2EE was replaced, and still some people refer to it (mostly recruiters, luckily!). But then comes the question: what has changed besides the name? Our community friend Abhishek Gupta worked on this question and provided an excellent response titled "What's in a name? Java EE? J2EE?". But let me give you a few highlights here so you don't lose yourself with YATO (yet another tab opened): J2EE used to be an infrastructure and resources provider only, requiring developers to depend on external 3rd-party frameworks to then implement application requirements or improve productivity J2EE used to require hundreds of XML lines of codes to define just a dozen of resources like EJBs, MDBs, Servlets, and so on J2EE used to support only EAR (Enterprise Archives) with a bunch of other archives like JARs and WARs just to run a simple Web application And so on, and so on! It was a great technology but still required a lot of work to get something up and running. Remember xDoclet? Remember Struts? The old days of pure Hibernate code? Or when Ajax became a trending topic and we were all implementing it with DWR Servlet? Still, we J2EE developers survived, and learned, and helped evolve the platform to a whole new level of DX (Developer Experience). A new DX for J2EE suggested a new name. One that referred to the platform as the Enterprise Edition of Java, because "Java is why we're here" quoting Bill Shannon. The release of Java EE 5 included so many features that clearly showed developers the platform was going after all those DX gaps. Radical simplification of the persistence model with the introduction of JPA Support of Annotations following the launch of Java SE 5.0 Updated XML APIs with the introduction of StAX Drastic simplification of the EJB component model (with annotations!) Convention over Configuration and Dependency Injection A few bullets you may say but that represented a whole new DX and a vision for upcoming versions. Clearly, the release of Java EE 5 helped drive the future of the platform by reducing the number of XMLs, Java Interfaces, simplified configurations, provided convention-over-configuration, etc! We then saw the release of Java EE 6 with even more great features like Managed Beans, CDI, Bean Validation, improved JSP and Servlets APIs, JASPIC, the posisbility to deploy plain WARs and so many other improvements it is difficult to list in one sentence. And we've gotta give Spring Framework some credit here: thanks to Rod Johnson and team, concepts like Dependency Injection fit perfectly into the Java EE Platform. Clearly, Spring used to be one of the most inspiring frameworks for the Java EE platform, and it is great to see things like Pivotal and Spring supporting JSR 352 Batch API standard! Cooperation to keep improving DX at maximum in the server-side Java landscape.  The master piece result of these previous releases is seen and called today as Java EE 7, which by providing a newly and improved JavaServer Faces release, with new features for Web Development like WebSockets API, improved JAX-RS, and JSON-P, but also including Batch API and so many other great improvements, has increased developer productivity and brought innovation to server-side Java developers. Java EE is not just a new name (which was introduced back in May 2006!) but a new Developer Experience for server-side Java developers. To show you why we are here and where we are going (see the Java EE 8 update), we wanted to share with you a draft of the new Java EE logos that the evangelist team created, to help you spread the word about Java EE. You can get access to these images at the Java EE Platform Facebook Album, or the Google+ Java EE Platform Album whichever is better for you, but don't forget to like and/or +1 those social network profiles :-) A message to all job recruiters: stop using J2EE and start using Java EE if you want to find great Java EE 5, Java EE 6, or Java EE 7 developers To not only save you recruiter valuable characters when tweeting that job opportunity but to also match the correct term, we invite you to replace long terms like "Java/J2EE" or even worse "#Java #J2EE #JEE" or all these awkward combinations with the only acceptable hashtag: #JavaEE. And to prove that Java EE is catching among developers and even recruiters, and that J2EE is past, let me highlight here how are the jobs trends! The image below is from Indeed.com trends page, for the following keywords: J2EE, Java/J2EE, Java/JEE, JEE. As you can see, J2EE is indeed going away, while JEE saw some increase. Perhaps because some people are just lazy to type "Java" but at the same time they are aware that J2EE (the '2') is past. We shall forgive that for a while :-) Another proof that J2EE is going away is by looking at its trending statistics at Google. People have been showing less and less interest in the term J2EE. See the chart below:  Recruiter, if you still need proof that J2EE is past, that Java EE is trending, and that other job recruiters are seeking for Java EE developers, and that the developer community is aware of the new term, perhaps these other charts can show you what term you should be using. See for example the Job Trends for Java EE at Indeed.com and notice where it started... 2006! 8 years ago :-) Last but not least, the Google Trends for Java EE term (including the still wrong but forgivable JavaEE term) shows us that the new term is catching up very well. J2EE is past. Oh, and don't worry about the curves going down. We developers like to be hipsters sometimes and today only AngularJS, NodeJS, BigData are going up. Java EE and other traditional server-side technologies such as Spring, or even from other platforms such as Ruby on Rails, PHP, Grails, are pretty much consolidated and the curves... well, they are consolidated too. So If you are a Java EE developer, drop that J2EE from your résumé, and let recruiters also know that this term is past. Embrace Java EE, and enjoy a new developer experience for server-side Java developers. Java EE on TwitterJava EE on Google+Java EE on Facebook

    Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >