Search Results

Search found 19332 results on 774 pages for 'hard drive'.

Page 191/774 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Dual boot windows 8.1 acer V3-571G with Ubuntu 13.10

  - by tara512

  I am trying to dual boot my acer which came with windows 8 pre-installed. I tried using the tutorial here doing it the simple way but when I load Ubuntu from my transcended flash drive it says that there is no other operating system installed. I tried partitioning my hard drive but I seem to have 3 recovery partitions and even though I have 485GB free I can only allocate 100GB to the new partition. I would like to have most of my hard drive allocated to Ubuntu and just use the windows for programs like microsoft office.

  Read the article

• /dev/sda2 contains a filesystem with error after partitioning

  - by Private

  I just wanted to create a separate home partition on my Ubuntu 12.10 system. I booted the liveDVD, resized the sda2 partition (28gb of data resized to 30gb based on MiB [originally on a 100gb partition]) and made a new ext4 partition for the home folder. The drive is an SSD drive. I had changed the settings (noatime etc.) for SSD succesfully a week ago. On reboot I get the following error: /dev/sda2 contains a filesystem with errors Inode 74669 has an invalid extent node (blk 6881289) fsd / [953] terminated with status 4 What would you suggest me to do? If I can avoid a clean install that would save me a lot of time (I had just done all the config). I was following this HOWTO, but I did not get to changing any of the files or configs other than those with gparted. I have a (two-week old) SSD Samsung drive which is functioning just fine (other specs see bottom of this question). Other specs: 64bit 12.10, i7, 8gb ram, nvidia.

  Read the article

• "Failed to mount Windows share" error in Samba

  - by Ranjith R

  This is the situation. There are 3 machines in the office. The Operating systems on them are respectively, Linux mint Ubuntu 12.04 Windows Vista The Ubuntu (#2) machine is supposed to be the common file server between the machines #1 and #3. Machine #2 has two hard disks. One is a 500 GB NTFS empty drive and the other is a 160 GB ext4 drive. My plan is to make the 500 GB as the file sharing disk. When I share a folder like ~/Documents using Nautilus context menu on machine #2, I can access the files easily on both #1 and #3, but when I try to share some folder on 500 GB disk, I get an error on machine #1 that says Failed to mount windows share I do not mind formatting the drive to ext4 if needed, but I am sure that something simple is wrong. EDIT I took @Marty's comment as a hint and used ntfs-config to configure automount of that partition. It is working now. Thanks

  Read the article

• disk not accessible

  - by user107044

  i formatted my hard drive yesterday and it was working well even after the formatting. But when I restarted my system again , is is showing that the space is alloted to my files but they are inaccessible. I have even tried to unhide the files and folders, if they got hidden somehow. But nothing works. the hard drive is being shown empty but the properties are saying that it still conatins the data : http://imgur.com/ObjTE in the image, it is showing that the directory has only 1 file of size:4.8 kbps but the space being used by the drive is 11.6 GB. do suggest some solution.

  Read the article

• Is it normal for 12.04 to occupy almost 4GB? Also, related questions

  - by Grant

  I'm using a ASUS EeePC 901 and have some basic questions/issues. I installed 12.04 on the 4GB drive, selecting the option to erase it before doing so. Immediately after the installation I saw that Update Manager had over 100 updates pending. I attempted to install these, but was told that I had less than 100 MB remaining. Does the OS occupy all the other space? It seems that the best solution is to install 12.04 on the 16GB drive. Is this true? If I do this, what is the best way to erase the 4GB drive afterwards?

  Read the article

• Got problem with installation. "No root file system is defined."

  - by user92322

  I'm very new with Ubuntu and generally with linux. I saw ubuntu and it seems like this OS is really good and stable, and so I decided to install it alongside my windows 7 OS. I have a few problems with the installation. Here is what I did: I downloaded the 64bit version from Ubuntu official website, and burned it on a dvd. I set the boot sequence to first load from my CD-Rom. Ubuntu installation started, and I chose "Install Ubuntu" in the menu. (where there is also a "Try Ubuntu" option) I clicked forward until I got into the installation type screen As you can see, the installation wont show my actual details about my hard drive! I have 1 hard drive with 750 GB - 80 GB - My main drive with windows 7 OS 600GB - All of my stuff 20GB Free space that I saved for Ubuntu But the installation wont show that!

  Read the article

• Is it normal for 12.04 to occupy almost 4GB?

  - by Grant

  I'm using a ASUS EeePC 901 and have some basic questions/issues. I installed 12.04 on the 4GB drive, selecting the option to erase it before doing so. Immediately after the installation I saw that Update Manager had over 100 updates pending. I attempted to install these, but was told that I had less than 100 MB remaining. Does the OS occupy all the other space? It seems that the best solution is to install 12.04 on the 16GB drive. Is this true? If I do this, what is the best way to erase the 4GB drive afterwards?

  Read the article

• PLS HELP!!How to boot windows 7 after installing ubuntu 12.10?

  - by user113553

  Im new to linux and im interested in learning it so I installed ubuntu 12.10 yesterday. Installation went smoothly and i chose "install alongside windows option" and I set about 50 gb using that slider and i tot i used 50 gb from c: drive but to my shock it used 50 gb space from f: drive. This was my first shock.Then when i restarted n tried to log into windows, nothing happened a black screen appeared saying "To restart press alt+ctrl+delete" but even pressing that it wont restart. No matter how many times i try rebooting windows is not booting same black screen saying restart appears. But i can log in to ubuntu and i can see that windows c: drive is fine. PLEASE HELP ME!!!!

  Read the article

• Daemon for moving files between partitions?

  - by RATHI

  I have a system with Ubuntu installed in 20GB and windows in 100 GB, two partitions - each of 100GB using NTFS. While using DC++ (multiple downloading of big file) I used to get message that system is running out of memory. Is there any way to make a deamon which will be checking the Ubuntu partition so that if its used space goes up to a certain amount (let's say 18 GB) it will automatically start a moving file from this drive to another drive (let's assume it will pick the file from movie folder or largest media file from this drive to move)? Or it prompt to ask from user which file to move? Is there any program which can do this for me? If not, can you suggest something to read so that I could make it?

  Read the article

• What is the best way of testing Ubuntu?

  - by Jay

  I'm a little confused as to whether I should install Ubuntu on its own partition on my hard drive, use VirtualBox or another virtualization package to install it, or use Wubi to install it directly on top of my current OS (Win 7). I definitely want to learn and use Ubuntu, so this is not just for playing around with it. Also, if I choose to partition, should I partition the hard drive myself or should I let the Ubuntu installation menu do it for me? I understand that I am going to need a main partition, for Ubuntu's core components, and also a swap partition. Then there is the option to add a partition for "home"- I don't understand what combination of these partitioning options I should choose, or whether it is better to partition in Windows before I install Ubuntu or just partition my hard drive when I install Ubuntu itself

  Read the article

• ubuntu 14.04 slow

  - by TURN A

  so i upgraded to ubuntu 14.04 from 12.04 with a usb but i have internet ,my computer is really slow at 1024x768 definition ,everything works super slow ,windows closing and opening and streaming videos ,everything ive used so far.but it works fine at 800x600 definition ,i want it to be fine at the higher definition ,how do i make it run well at 1024x768 ? in additional drivers nothing shows ,and my computer mirrors by default for some reason ,i tried stopping it from mirroring but most buttons dont want to work and weird glitches happen ,the system doesnt work well when not mirroring , i dont care if it mirrors or not i just want good performance .thank you in advance for any answers !! here are the computer specs Processor 1.8 GHz 8032 RAM 2 GB DDR3 Memory Speed 1066 MHz Hard Drive 32 GB Graphics Coprocessor Graphics Media Accelerator HD Wireless Type 802.11B, 802.11G, 802.11n Number of USB 2.0 Ports 4 Expand Other Technical Details Brand Name Asus Item model number EB1030-B003L Hardware Platform Linux Operating System Ubuntu Item Weight 1.5 pounds Item Dimensions L x W x H 1.14 x 6.70 x 8.60 inches Color Black Processor Brand Intel Processor Count 1 Computer Memory Type DDR3 SDRAM Flash Memory Size 32 Hard Drive Interface Solid State Optical Drive Type No

  Read the article

• unable to boot from live USB!

  - by ramblinman

  Linux noob here. I was messing around with my new dual-boot (win7 and the latest ubuntu, 12.04 I think?) Long story short, I deleted some partitions that I shouldn't have. When I boot up the machine, I get: error: no such partition. grub rescue _ I know that I could probably fix this by booting from the live USB. But I can't boot from the live USB either! On startup, I can get "boot from drive" options by pressing F12. (This is how I installed Ubuntu in the first place.) But when I select the USB drive, I get this error: error: no such device: [long string of letters and numbers]. grub rescue _ I've searched around for a fix but most threads addressing the first problem suggest booting from live drive. And I can't do that! Any help much appreciated.

  Read the article

• best cloud storage + rsnapshot

  - by humbledude

  I’ve started using rsnapshot as my backup system for home PC. I really like the idea of hard links and how they are handled. But can’t find best workflow. Currently I keep my snapshots on the same partition and let’s say, copy newest one to a pendrive at the end of the week. Cloud storage is what I’m looking for. As of rsnapshot, Dropbox doesn’t fit my needs. More over there is no way to make it respect hard links — all snapshots are treated as a full snapshot. Renting a server is pretty expensive so my question is, are there better alternatives for backup in the cloud? I would like to benefit from hard links and send only incremental backups, just like in my local host.

  Read the article

• My Computer in Ubuntu?

  - by Casey Hungler

  I was wondering if Ubuntu has an equivalent to the Windows feature "My Computer", which lists all available drives/storage devices. Typically, My Computer shows C:, which can be opened to view all of your directories and files. At this point, it is very similar to Ubuntu's Home Folder, but I am looking for something that allows me to view/select all available HDD's/Partitions. Here's my reason: I found a 6gb IDE HDD in my basement, and got an IDE cable for it. My desktop computer has a SATA drive in it, but has an IDE slot, so I wanted to plug it in and see what might be on it. The drive seems to be recognized in BIOS, but I can't find it in Ubuntu to view files, and Ubuntu is the only OS on that particular computer. If anyone has any ideas as to how to view the contents of that drive WITHOUT formatting it or tampering with the contents in any way, I would greatly appreciate your help. Thanks in advance!

  Read the article

• Windows 7 and Ubuntu Boot issue

  - by user115137

  I had the idea to dual boot Win 7 and Ubuntu and what I did was the following: Made a clean install of win 7 using all of my hard drive, next I used the Ubuntu live cd and gparted to partition my drive to be the following: /dev/sda1 ext4 20GB (Linux root) /dev/sda2 ntfs 100GB(Win7) /dev/sda3 ext4 350GB(Home) /dev/sda4 extended 4GB(swap) The thing is, when installing ubuntu I deleted the partition win 7 creates for its boot sector and recovery and then resized the drive to look like what I mentioned, and Ubuntu installed GRUB to the MBR. When GRUB boots I can see Ubuntu but not Windows, how can I chainload it? Or should I fix the windows mbr with the windows 7 installation disk and try to set the dual boot from there? I don't really care which one of the 2 bootloaders I end up using, I just want the dual boot to work out. Thanks

  Read the article

• What of my Swap space if I choose to replace windows with ubuntu?

  - by Ramandeep

  When I install Ubunut 12.04 I'll be presented with three options - install ubuntu alongside windows, replace windows with ubuntu and 'something else'. If I choose 'replace windows' then I can not be able to make a swap space. So what then. I've 1GB ram. And if I choose 'replace windows' will my only C drive get replaced or what'll happen? If only C drive is affected then will data on the other 2 drives get saved? Again if yes, how can I access it (on which drive of ubuntu) after installing ubuntu?

  Read the article

• Live USB does not work

  - by MARUF SARKER

  I've made live USB using these "Universal-USB-Installer-1.9.1.9", "unetbootin-windows-581", "YUMI-0.0.8.0" & "LinuxLive USB Creator 2.8.18" in "FAT32" format, but unfortunately I could not boot using the pen-drive. My BIOS supports boot from USB drive. When I am booting from the live usb, it just show black screen with a blinking "_", but nothing happens after that( I have waited more than 10 minutes, but nothing happens). So, can anyone please help me on this? [Additional Info.: I've made Bootable USB using PowerISO and that booted, but it was not possible to access the USB normally afterwards,because PowerISO formatted the USB Drive as RAW(or anything I don't know) and it became 8GB to 700MB, afterwards I had to format it using MiniTool Partition manager.]

  Read the article

• Unknown file system: grub Rescue

  - by samba

  I deleted the partition which contains the Ubuntu 12.0.4 OS. I have windows one other drive. When I reboot the system, It shows the following. unknown filesystem. grub rescue I read the previous questions about this topic and I tried to install Linux again using usb flash drive but was unable to boot from flash drive. I do not have a DVD ROM... what Shall I do now to boot from windows...? thank you in advance....

  Read the article

• updating from 8.04 to a newer version?

  - by user175802

  I have an old system. It doesn't have a DVD drive, and I think the cd drive is a bit wonky. The only disk that I have been able to get to install is an old (official) 8.04 Kubuntu disk. No disk that I've burned on a few systems works. They check out, but they don't seem to survive the install (another issue). I thought once I got a version on that I could update over the web, but no luck. It appears EOL. No updates seem to be available, or software to install. Is there a way? I'd like to get it to as new a version as possible. The next step would be to pull the drive and get a new one, but I'd rather not.

  Read the article

• How should game objects with fixed positions in the world be positioned?

  - by mars

  I have some game objects that are always at the same position in my game world as they make up some of the scenery of my puzzle game. At the moment, their positions are sort of hard coded in and some of their positions are calculated relative to the hard coded positions of other objects at the time of game initialization. This has been hard to maintain because whenever I've decided to change the position of these scenery objects as the game design evolved, I have to go and rewrite parts of the code that place the created objects and calculate their positions in the world. Is there a more maintainable way of handling the positioning of fixed game objects?

  Read the article

• True live USB: Fully Functional

  - by jhewitt3476

  I can't seem to have the affect I'm looking for on a "Live Ubuntu" I want to run it from the USB drive, a fully functional, fully upgradable version. I do not want to use as a "trial version", or to set up a dual boot or run in a virtual system. I have kids that are killing my computer & everything on my HD, they need their own OS & drive but don't have the $$$ for a laptop for them, I just want it to work on the USB the same way it works on the C: drive

  Read the article

• Wireless Connected But No Internet Connection (Ubuntu 12.04)

  - by Zxy

  I am using same network for 2 days and everything was normal. However, today even though it shows me as connected to the network, I do not have internet connection. If I use ethernet cable instead of wireless, I am still able to connect to the internet. Also my friends are able to connect to the wireless network and they can get internet connection. I did not update or install anything since yesterday. Therefore I do not have any idea why it is happening. Here is some information about my connection: I will be appreciate to any kind of help. root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 root@ghostrider:/etc/resolvconf# ping 127.0.0.1 PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data. 64 bytes from 127.0.0.1: icmp_req=1 ttl=64 time=0.042 ms 64 bytes from 127.0.0.1: icmp_req=2 ttl=64 time=0.023 ms 64 bytes from 127.0.0.1: icmp_req=3 ttl=64 time=0.036 ms 64 bytes from 127.0.0.1: icmp_req=4 ttl=64 time=0.040 ms ^C --- 127.0.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2998ms rtt min/avg/max/mdev = 0.023/0.035/0.042/0.008 ms root@ghostrider:/etc/resolvconf# ping 192.168.1.3 PING 192.168.1.3 (192.168.1.3) 56(84) bytes of data. ^C --- 192.168.1.3 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18143ms root@ghostrider:/etc/resolvconf# ping 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. ^C --- 8.8.8.8 ping statistics --- 11 packets transmitted, 0 received, 100% packet loss, time 10079ms root@ghostrider:/etc/resolvconf# cat /etc/lsb-release; uname -a DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04 LTS" Linux ghostrider 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux root@ghostrider:/etc/resolvconf# lspci -nnk | grep -iA2 net 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8131 Gigabit Ethernet [1969:1063] (rev c0) Subsystem: Lenovo Device [17aa:3956] Kernel driver in use: atl1c -- 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] Kernel driver in use: wl root@ghostrider:/etc/resolvconf# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 007: ID 0489:e00d Foxconn / Hon Hai Bus 001 Device 004: ID 1c7a:0801 LighTuning Technology Inc. Fingerprint Reader Bus 001 Device 005: ID 064e:f219 Suyin Corp. Bus 002 Device 010: ID 0424:2412 Standard Microsystems Corp. Bus 002 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 002 Device 011: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC root@ghostrider:/etc/resolvconf# iwconfig lo no wireless extensions. eth1 IEEE 802.11 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz Access Point: 00:16:E3:40:C3:E4 Bit Rate=54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=-52 dBm Noise level=-97 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 eth0 no wireless extensions. root@ghostrider:/etc/resolvconf# rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no 5: hci0: Bluetooth Soft blocked: no Hard blocked: no root@ghostrider:/etc/resolvconf# lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 snd_hda_codec_realtek 174055 1 rfcomm 38139 12 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 joydev 17393 0 ftdi_sio 35859 1 usbserial 37173 3 ftdi_sio snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec acer_wmi 23612 0 hid_logitech_dj 18177 0 snd_pcm 80845 2 snd_hda_intel,snd_hda_codec uvcvideo 67203 0 btusb 17912 2 snd_seq_midi 13132 0 videodev 86588 1 uvcvideo bluetooth 158438 23 rfcomm,bnep,btusb psmouse 72919 0 usbhid 41906 1 hid_logitech_dj snd_rawmidi 25424 1 snd_seq_midi intel_ips 17753 0 serio_raw 13027 0 hid 77367 2 hid_logitech_dj,usbhid ideapad_laptop 17890 0 sparse_keymap 13658 2 acer_wmi,ideapad_laptop lib80211_crypt_tkip 17275 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event wl 2646601 0 wmi 18744 1 acer_wmi i915 414672 3 drm_kms_helper 45466 1 i915 snd_timer 28931 2 snd_pcm,snd_seq mac_hid 13077 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq lib80211 14040 2 lib80211_crypt_tkip,wl drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 snd 62064 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_se q,snd_timer,snd_seq_device video 19068 1 i915 mei 36570 0 soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp atl1c 36718 0 root@ghostrider:/etc/resolvconf# nm-tool NetworkManager Tool State: connected (global) - Device: eth1 [PoliTekno] ---------------------------------------------------- Type: 802.11 WiFi Driver: wl State: connected Default: yes HW Address: AC:81:12:7F:6B:B2 Capabilities: Speed: 54 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) CnDStudios: Infra, 00:12:BF:3F:0A:8A, Freq 2412 MHz, Rate 54 Mb/s, Strength 85 WPA AIR_TIES: Infra, 00:1C:A8:6E:84:32, Freq 2462 MHz, Rate 54 Mb/s, Strength 72 WPA2 VKSS: Infra, 00:E0:4D:01:0D:47, Freq 2452 MHz, Rate 54 Mb/s, Strength 62 WPA2 PROGEDA: Infra, 00:1A:2A:60:BF:61, Freq 2462 MHz, Rate 54 Mb/s, Strength 47 WPA MobilAtolye: Infra, 72:2B:C1:65:75:3C, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 AIRTIES_WAR-141: Infra, 00:1C:A8:AB:AA:48, Freq 2422 MHz, Rate 54 Mb/s, Strength 35 WPA WPA2 tilda_biri_yeni: Infra, 54:E6:FC:B0:3C:E9, Freq 2437 MHz, Rate 0 Mb/s, Strength 34 WEP *PoliTekno: Infra, 00:16:E3:40:C3:E4, Freq 2462 MHz, Rate 54 Mb/s, Strength 100 WPA2 AIRTIES_RJY: Infra, 00:1A:2A:BD:85:16, Freq 2462 MHz, Rate 54 Mb/s, Strength 55 WEP IPv4 Settings: Address: 0.0.0.0 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: F0:DE:F1:6C:90:65 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off root@ghostrider:/etc/resolvconf# sudo iwlist scan lo Interface doesn't support scanning. eth1 Scan completed : Cell 01 - Address: 00:16:E3:40:C3:E4 ESSID:"PoliTekno" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-48 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: 00:E0:4D:01:0D:47 ESSID:"VKSS" Mode:Managed Frequency:2.452 GHz (Channel 9) Quality:4/5 Signal level:-64 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s Cell 03 - Address: 00:1C:A8:AB:AA:48 ESSID:"AIRTIES_WAR-141" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-77 dBm Noise level:-95 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: DDB20050F204104A0001101049001E007FC5100018DE7CF0D8B70223A62711C18926AC290E30303030303139631044000102103B0001031047001076B31BC241E953CB99C3872554425A28102100194169725469657320576972656C657373204E6574776F726B73102300074169723534343010240008312E322E302E31321042000F4154303939313131383030323832351054000800060050F20400011011000741697235343430100800020084103C000103 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 04 - Address: 72:2B:C1:65:75:3C ESSID:"MobilAtolye" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:2/5 Signal level:-78 dBm Noise level:-92 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: Unknown: DDA20050F204104A0001101044000102103B00010310470010BC329E001DD811B28601722BC165753C1021001D48756177656920546563686E6F6C6F6769657320436F2E2C204C74642E1023001C48756177656920576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F204000110110009487561776569415053100800020084103C000100 IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 12 Mb/s 24 Mb/s; 48 Mb/s Cell 05 - Address: 00:12:BF:3F:0A:8A ESSID:"CnDStudios" Mode:Managed Frequency:2.412 GHz (Channel 1) Quality:5/5 Signal level:-47 dBm Noise level:-95 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 06 - Address: 00:1C:A8:6E:84:32 ESSID:"AIR_TIES" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:5/5 Signal level:-56 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Cell 07 - Address: 54:E6:FC:B0:3C:E9 ESSID:"tilda_biri_yeni" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-85 dBm Noise level:-99 dBm Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s 48 Mb/s; 54 Mb/s Cell 08 - Address: 18:28:61:16:57:C3 ESSID:"obilet" Mode:Managed Frequency:2.437 GHz (Channel 6) Quality:1/5 Signal level:-88 dBm Noise level:-99 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 09 - Address: 00:1A:2A:60:BF:61 ESSID:"PROGEDA" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-75 dBm Noise level:-98 dBm IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 22 Mb/s 6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s eth0 Interface doesn't support scanning.

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Ubuntu 12.04 Bootloader failed to install

  - by Chris

  Sorry about the excessively long question, but I figured giving more information would be better. I recently bought a new desktop for myself, running Windows 7. It has two hard drives, and I wanted to install Ubuntu on a small partition on the second hard drive. I created 25GB "free space" in Windows and ran a LiveCD install. I wanted to select the install options myself but accidentally selected "Install alongside Windows 7," but it seemed to pick up the free space and installed itself there as I wanted it to. However, I was told that the bootloader installation had failed. I chose to "Cancel installation," leaving my computer unable to boot. I wiped my computer and reinstalled Windows. After that, I tried installing Ubuntu through Windows using WUBI, once using files from my LiveCD and once downloading everything again. Both times the install succeeded, but both times when I restarted and tried to load Ubuntu, it gave me an error - wubildr.mbr was corrupt or missing. I checked in Windows - it was indeed present on the C:\ drive. I went back to the LiveCD installation, this time going the custom options route. I assigned 16GB to an Ext4 journaling file system and 10GB to a swap file. I got the same bootloader error as before. Being prompted to select a different partition to install the bootloader to, I first tried the partition Ubuntu was installed on. A window came up saying that the install had succeeded, but a second window gave me the same error and choices as before. I went through every single option it gave me, including the Windows partition and the hard drives themselves (dev/sda, dev/sdb). Same result. I then chose to not install a bootloader. Windows still works fine, and I assume Ubuntu has installed but is unbootable. Knowing that my computer could potentially brick itself again - and, this time around, with a lot of data to lose and hassle to go through if I mess it up - I really don't want to do anything without some advice. So I'll ask this: a) Why did the bootloader fail to install? Can I fix the error and install Ubuntu fresh? b) Is there any way to get around the error, install the bootloader, and point it towards an existing installation of Ubuntu? c) Is there a quicker and easier solution I might have missed? EDIT: Thanks for the tip, AthloX. After testing the liveCD in Virtualbox with no installation problems, I looked around for some alternate bootloaders but had no success. I attempted another install, which installed the bootloader and Ubuntu just fine but bricked Windows 7. I wiped both hard disks clean, including some "System Reserved" partitions I hadn't noticed before, before re-installing Windows 7 on one hard drive and immediately afterwards installing Ubuntu on the other. Now the computer boots into Windows, but I can pop into the BIOS at startup to boot into Ubunbtu via it's bootloader, and I'm guessing it'll only take a bit of poking at the BIOS to swap the load order. Many thanks!

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >