Search Results

Search found 19332 results on 774 pages for 'hard drive'.

Page 192/774 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

  • ubuntu 10.04: wlan0 No such device

    - by AodhanOL
    I am using a Dell xps l702x and I am using ubuntu 10.04 because I need to use f77 (don't ask) and I wasn't able to get it working on later versions of ubuntu. I cannot use the wifi at all. I have tried to fix it and have had limited success (changed the output from rfkill list all from Hard blocked: yes, to hard blocked: no). Here is the output from rfkill list all aodhan@aodhan-laptop:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-bluetooth: Bluetooth Soft blocked: no Hard blocked: no Here is the output from iwconfig: aodhan@aodhan-laptop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. And here is the output from ifconfig -a: aodhan@aodhan-laptop:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 5c:f9:dd:3d:f2:f7 inet addr:192.168.1.17 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::5ef9:ddff:fe3d:f2f7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3417 errors:0 dropped:0 overruns:0 frame:0 TX packets:2894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3317567 (3.3 MB) TX bytes:505049 (505.0 KB) Interrupt:30 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) pan0 Link encap:Ethernet HWaddr 7e:7e:e8:39:70:af BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And finally, the output from lspci: 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4b (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1246 (rev a1) 03:00.0 Network controller: Intel Corporation Device 008a (rev 34) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Please help me! Thank you in advance. Edit: Further info - this is a dual install with a windows 7 system as the other option. However, I can't access that until tomorrow (I won't have access to the windows 7 disc until then, and grub isn't letting me load it). Therefore, I can't be sure whether it still works on that or not. It used to, though.

    Read the article

  • C# export to excel from sql server

    - by Manish Gupta
    In my C# windows application, I am exporting sql server data to excel on remote drive. But it is too slow. However, if I export data to excel in the local drive, it is fast. How can I increase the time if I want to export data to remote drive? Thanks in advance...

    Read the article

  • Ant Copy Task: Failed to copy due to java.io.FileNotFoundException

    - by rfkrocktk
    I'm trying to compile a Flex application in Ant (no problems here, I can do it fine). When I try to publish the contents of the project to a Windows network drive (known as "Z:\" on my system), I get the following LAME exception thrown by Java/Ant: BUILD FAILED C:\workspace\bkeller\build.xml:42: Failed to copy C:\workspace\bkeller\web\assets\text\biography.html to Z:\web\bkeller\assets\text\biography.html due to java.io.FileNotFoundException Z:\web\bkeller\assets\text\biography.html (The system cannot find the file specified) Which kind of sucks. I can't find any way to get rid of this problem and it's pretty crucial to my project that I get this working. I know for sure that I have read/write/execute permissions on the network drive, I can create/edit/delete files on the drive just fine through Windows explorer. Drive Z is a network mount to virtualbox, allowing me to get access to my host OS, Ubuntu. I've double checked that it has write permissions. Any ideas?

    Read the article

  • Bash scripting problem

    - by komidore64
    I'm writing a bash script to sync my iTunes music directory to a directory on a removable hard drive. The script works fine when there is absolutely nothing in the folder on the external hard drive. Once all files have been copied to the external drive, then the script begins to act strange. Even though i just sync'd everything over, it proceeds to recopy certain files again. After the initial sync, it chooses the same files to resync each consecutive time the script is executed without any changes being made to the source directory. #!/bin/bash # shell script to sync music with gigabeat and/or firewire drive musicdir="/Users/komidore64/Music/iTunes/iTunes Media/Music" gigadir="/Volumes/GIGABEAT/music" # fwdir="/Volumes/" remove() { find "$1" \ ! \( -name "*.wav" \ -o -name "*.ogg" \ -o -name "*.flac" \ -o -name "*.aac" \ -o -name "*.mp3" \ -o -name "*.m4a" \ -o -name "*.wma" \ -o -name "*.m4p" \ -o -name "*.ape" \ -o -type d \) \ -exec rm -i {} \; } if [ $# == 0 ]; then echo "no device argument present" echo "specify '-g' for gigabeat" echo "or '-f' for firewire drive" else remove "$musicdir" while [ $1 ]; do case $1 in -g | --gigabeat ) rsync --archive --verbose --delete "$musicdir/" "$gigadir" ;; -f | --firewire ) rsync --archive --verbose --delete "$musicdir/" "$fwdir" esac shift done echo "music synced" fi

    Read the article

  • customizing setup using NSIS Script Editor

    - by vikaskardode
    I developed customize setup wizard using NSIS Editor. Setup allows an user to Install an application in only available Drive Letter In Client Machine, shown in combobox . But problem is that removable Drive like PENDRIVE also detects in Setup Wizard if it is connected , Is that Possible to not detecting Removable Drive In Setup Wizard

    Read the article

  • fsutil hardlink doesn't work?

    - by Alix Axel
    I was looking for a way to create hard links under Windows and I found this page: http://technet.microsoft.com/en-us/library/cc788097.aspx To try it out, I created a file (1.txt) on the root of my C: drive with 100 lines of the following content: C:\1.txt (2.598 bytes): test test test test test Then I open the command prompt and type: fsutil hardlink create C:\2.txt C:\1.txt Success, 2.txt was created but when I go to see it's size it has exactly 2.598 bytes and also noticed some strange behaviours (as far as my understanding of hard links goes): If I delete 2.txt (the hard linked file) 1.txt is not deleted, and vice-versa. If I open 2.txt after I delete 1.txt (the original file) the content is still the same. How does the fsutil hardlink create command differs from the copy command? And how can I create a true hard link under Windows? I'm using Windows XP SP 3, and my file system is NTFS.

    Read the article

  • All partitions missing when copying

    - by LiveEn
    I bought a new 320GB SATA hard drive few months ago no recently when i try to copy something to the drive after about 20 seconds the all the partitions in the hard drive suddenly disappears. The hard drive is not shown in either Disk manager or device manager. To get the HD work i have to restart the PC again.The same thing happens when i try to copy. Even when i play any audio or video after abt 5 minutes i get the same problem. The drives are NTFS and im running Windows XP.. Xan some one please help me solve the problem??

    Read the article

  • Why is my mdadm raid-1 recovery so slow?

    - by dimmer
    On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

    Read the article

  • calculate space in mount point

    - by user175084
    i have a folder tempAgents within a mount point drive. This mount point drive is within my E drive. so the address is like this "E:\mountpoint\tempAgents" now i need to calculate the free space and total space of the mount point. is there a way to do so.. thanks

    Read the article

  • A peculiar problem

    - by rajivpradeep
    I have an application on a pen drive, which executes some flash files on the same USB flash drive. when i run the application with in the drive, the application just keeps running in the back ground without running the flash files. When i copy the application on desktop, it runs the flash files in the USB. Also i programmed the app to write log file, when i run the application with in USB, the app is running but the log file is not getting written, when i remove the pen drive, the file gets written. What might be the problem, I am using VC++ , VS 2008 to build the application.

    Read the article

  • Interrupt ?13 (ah=48) - don't working

    - by GLeBaTi
    mov dl,00h mov ah,08h int 13h this is code showing normal parameters of floppy disk. mov dl,80h mov ah,08h int 13h this is code, showing not valid parameters of hard disk(may be, my hard disk space is big (LBA)), And I've written this code: mov dl,80h mov ah,48h int 13h it is code doing cf = 1(error). How fix it? I want learn parameters of my hard disk. (http://lrs.uni-passau.de/support/doc/interrupt-57/RB-0677.HTM)

    Read the article

  • Problem with an application in USB

    - by rajivpradeep
    I have an application on a pen drive, which executes some flash files on the same USB flash drive. when i run the application with in the drive, the application just keeps running in the back ground without running the flash files. When i copy the application on desktop, it runs the flash files in the USB. Also i programmed the app to write log file, when i run the application with in USB, the app is running but the log file is not getting written, when i remove the pen drive, the file gets written. What might be the problem, I am using VC++ , VS 2008 to build the application.

    Read the article

  • Interrupt ?13 (ah=48) - not working

    - by GLeBaTi
    I want fetch the parameters of my hard disk. Using the technique described here. This is code showing normal parameters of floppy disk: mov dl,00h mov ah,08h int 13h This is code, showing not valid parameters of hard disk (may be, my hard disk space is big (LBA)): mov dl,80h mov ah,08h int 13h And I've written this code: mov dl,80h mov ah,48h int 13h The code is giving cf = 1(error). How do I fix it?

    Read the article

  • Dual Boot issues with Windows 7 and Ubuntu

    - by Michael
    I'm finding myself in a rather unique situation. I've read through just about every resource I can find about this and while things have helped me understand some background, I haven't yet been able to find a solution. So I'm asking here. I originally had just a Windows 7 64-bit OS installation on my desktop. Learning that I couldn't do anything with Apache, PHP and MySql from within a 64-bit system, I did some research and found out that I could use Ubuntu. I've installed the latest version: 11.04. I created a CD to install Ubuntu from and the install went just fine. I installed it side-by-side with Windows 7. I can boot into Ubuntu just fine through the dual-boot option. When I reboot to load Windows though, the Grub2 list shows Windows 7 (loader) and when I select this option the Windows System Recovery loads instead of the actual OS. I haven't made it past there because I didn't know what to do. I just shut the computer down and rebooted into Ubuntu. I've been working for the last hour and a half to try to figure out how to boot into the Windows 7 OS and I haven't got a clue. While I'm somewhat proficient with Windows 7, I'm totally new to Ubuntu, so if you do know what needs to happen, please keep it simple enough that I'll be able to understand. Thanks for all your help in advance. Here's the results after using the Boot Info Script: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for cbh. => Windows is installed in the MBR of /dev/sdb => Grub 2 is installed in the MBR of /dev/mapper/pdc_bdadcfbdif and looks on the same drive in partition #5 for cbh. sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /boot/BCD sdb4: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: pdc_bdadcfbdif1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD pdc_bdadcfbdif2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe pdc_bdadcfbdif3: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy mount: unknown filesystem type '' =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sda2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/sda3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sdb2 206,911 1,342,554,688 1,342,347,778 7 HPFS/NTFS /dev/sdb3 1,930,344,448 1,953,521,663 23,177,216 7 HPFS/NTFS /dev/sdb4 1,342,556,158 1,930,344,447 587,788,290 5 Extended /dev/sdb5 1,342,556,160 1,896,806,399 554,250,240 83 Linux /dev/sdb6 1,896,808,448 1,930,344,447 33,536,000 82 Linux swap / Solaris Drive: pdc_bdadcfbdif ___________________ _____________________________________________________ Disk /dev/mapper/pdc_bdadcfbdif: 750.0 GB, 749999947776 bytes 255 heads, 63 sectors/track, 91182 cylinders, total 1464843648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/mapper/pdc_bdadcfbdif1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 ends after the last sector of /dev/mapper/pdc_bdadcfbdif blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/mapper/pdc_bdadcfbdif1 888E54CC8E54B482 ntfs SYSTEM /dev/mapper/pdc_bdadcfbdif2 C2766BF6766BEA1D ntfs OS /dev/mapper/pdc_bdadcfbdif: PTTYPE="dos" /dev/sda1 888E54CC8E54B482 ntfs SYSTEM /dev/sda2 C2766BF6766BEA1D ntfs OS /dev/sda3 BE6CA31D6CA2CF87 ntfs HP_RECOVERY /dev/sda promise_fasttrack_raid_member /dev/sdb1 20B65685B6565B7C ntfs SYSTEM /dev/sdb2 B4467A314679F508 ntfs HP /dev/sdb3 6E10B7A410B77227 ntfs FACTORY_IMAGE /dev/sdb4: PTTYPE="dos" /dev/sdb5 266f9801-cf4f-4acc-affa-2092be035f0c ext4 /dev/sdb6 1df35749-a887-45ff-a3de-edd52239847d swap /dev/sdb: PTTYPE="dos" error: /dev/mapper/pdc_bdadcfbdif3: No such file or directory error: /dev/sdc: No medium found error: /dev/sdd: No medium found error: /dev/sde: No medium found error: /dev/sdf: No medium found error: /dev/sdg: No medium found ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sdb5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc- affa-2092be035f0c ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic-pae } menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c echo 'Loading Linux 2.6.38-8-generic-pae ...' linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc-affa-2092be035f0c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos1)' search --no-floppy --fs-uuid --set=root 20B65685B6565B7C chainloader +1 } menuentry "Windows Recovery Environment (loader) (on /dev/sdb3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos3)' search --no-floppy --fs-uuid --set=root 6E10B7A410B77227 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb5 during installation UUID=266f9801-cf4f-4acc-affa-2092be035f0c / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb6 during installation UUID=1df35749-a887-45ff-a3de-edd52239847d none swap sw 0 0 =================== sdb5: Location of files loaded by Grub: =================== 900.1GB: boot/grub/core.img 825.0GB: boot/grub/grub.cfg 688.7GB: boot/initrd.img-2.6.38-8-generic-pae 688.0GB: boot/vmlinuz-2.6.38-8-generic-pae 688.7GB: initrd.img 688.0GB: vmlinuz =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on pdc_bdadcfbdif3 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde sdf sdg =============================== StdErr Messages: =============================== ERROR: dos: partition address past end of RAID device hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory ERROR: dos: partition address past end of RAID device

    Read the article

  • Prevent auto mounting Android sdcard under Linux Mint

    - by BullShark
    I recently obtained an older Android phone, so that I could test Android Apps on it. I've needed it because I have a Nexus 7 but not older Android versions, hardware, etc. to test on. I'm having a problem with it under Linux Mint with Cinnamon. When I plug the phone in, or remove and plug the sdcard from the phone back to it while the phone is plugged in, Linux automatically mounts the sdcard. This is a problem because once it is mounted under Linux, it dismounts from the phone running Android 2.3.5, and I can no longer test Android Apps I write that require the sdcard to be present, writable. I went to Menu System Tools System Settings System Details Removable Media, and it brings up this window. I have changed the settings to always "Ask what to do" on "Select how media should be handled". However, the sdcard still gets mounted and then I am asked how I want to open these files (media players, photo importers, file browser, etc.). If I click the checkbox for "Never prompt or start programs on media insertion", then the sdcard is mounted, and I am not asked how to open these files. Eject is just a noob word for Ubuntu users that means umount (unmount) like "Adminstrator" is another ubuntu noob word for the root user. And if I unmount the sdcard, the phone doesn't recognize it again until I take the sdcard out and plug it back in. The phone sees it for a brief moment until Linux Mint takes it over. There are 2 possible solutions and maybe more: 1) Prevent Linux from automounting sdcards some how 2) Tell Android not to allow the computer it is plugged into to take over the sdcard, HOW? Edit: I found out how to prevent the sdcard from being automatically mounted: Now it gets recognized by Linux: bullshark@beastlinux ~ $ dmesg | tail -n 25 [597212.218323] sd 21:0:0:0: [sde] Attached SCSI removable disk [597212.218639] sr 21:0:0:1: Attached scsi CD-ROM sr2 [597212.218910] sr 21:0:0:1: Attached scsi generic sg7 type 5 [597217.139373] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597217.140726] sd 21:0:0:0: [sde] No Caching mode page present [597217.140735] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.143595] sd 21:0:0:0: [sde] No Caching mode page present [597217.143602] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.152240] sde: sde1 [597389.751008] 4:2:1: cannot get freq at ep 0x84 [597390.238742] 4:2:1: cannot get freq at ep 0x84 [597624.903132] sde: detected capacity change from 1977614336 to 0 [597637.677763] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597637.679616] sd 21:0:0:0: [sde] No Caching mode page present [597637.679626] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.682508] sd 21:0:0:0: [sde] No Caching mode page present [597637.682515] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.692758] sde: sde1 [597661.857979] sde: detected capacity change from 1977614336 to 0 [597688.775455] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597688.776814] sd 21:0:0:0: [sde] No Caching mode page present [597688.776823] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.780055] sd 21:0:0:0: [sde] No Caching mode page present [597688.780062] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.788639] sde: sde1 bullshark@beastlinux ~ $ However, the phone still unmounts the sdcard upon being detected by Linux. Linux detects but does not mount, and a few seconds later: Edit #2 (Solution): I solved this one by changing the usb connection type (was usb mass storage) :

    Read the article

  • How to get rid of a stubborn 'removed' device in mdadm

    - by T.J. Crowder
    One of my server's drives failed and so I removed the failed drive from all three relevant arrays, had the drive swapped out, and then added the new drive to the arrays. Two of the arrays worked perfectly. The third added the drive back as a spare, and there's an odd "removed" entry in the mdadm details. I tried both mdadm /dev/md2 --remove failed and mdadm /dev/md2 --remove detached as suggested here and here, neither of which complained, but neither of which had any effect, either. Does anyone know how I can get rid of that entry and get the drive added back properly? (Ideally without resyncing a third time, I've already had to do it twice and it takes hours. But if that's what it takes, that's what it takes.) The new drive is /dev/sda, the relevant partition is /dev/sda3. Here's the detail on the array: # mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Oct 26 12:27:49 2011 Raid Level : raid1 Array Size : 729952192 (696.14 GiB 747.47 GB) Used Dev Size : 729952192 (696.14 GiB 747.47 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 12 17:48:53 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 2fdbf68c:d572d905:776c2c25:004bd7b2 (local to host blah) Events : 0.34665 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - spare /dev/sda3 If it's relevant, it's a 64-bit server. It normally runs Ubuntu, but right now I'm in the data centre's "rescue" OS, which is Debian 7 (wheezy). The "removed" entry was there the last time I was in Ubuntu (it won't, currently, boot from the disk), so I don't think that's not some Ubuntu/Debian conflict (and they are, of course, closely related). Update: Having done extensive tests with test devices on a local machine, I'm just plain getting anomalous behavior from mdadm with this array. For instance, with /dev/sda3 removed from the array again, I did this: mdadm /dev/md2 --grow --force --raid-devices=1 And that got rid of the "removed" device, leaving me just with /dev/sdb3. Then I nuked /dev/sda3 (wrote a file system to it, so it didn't have the raid fs anymore), then: mdadm /dev/md2 --grow --raid-devices=2 ...which gave me an array with /dev/sdb3 in slot 0 and "removed" in slot 1 as you'd expect. Then mdadm /dev/md2 --add /dev/sda3 ...added it — as a spare again. (Another 3.5 hours down the drain.) So with the rebuilt spare in the array, given that mdadm's man page says RAID-DEVICES CHANGES ... When the number of devices is increased, any hot spares that are present will be activated immediately. ...I grew the array to three devices, to try to activate the "spare": mdadm /dev/md2 --grow --raid-devices=3 What did I get? Two "removed" devices, and the spare. And yet when I do this with a test array, I don't get this behavior. So I nuked /dev/sda3 again, used it to create a brand-new array, and am copying the data from the old array to the new one: rsync -r -t -v --exclude 'lost+found' --progress /mnt/oldarray/* /mnt/newarray This will, of course, take hours. Hopefully when I'm done, I can stop the old array entirely, nuke /dev/sdb3, and add it to the new array. Hopefully, it won't get added as a spare!

    Read the article

  • Windows 7: How to place SuperFetch cache on an SSD?

    - by Ian Boyd
    I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

    Read the article

  • How to place SuperFetch cache on an SSD?

    - by Ian Boyd
    I'm thinking of adding a solid state drive (SSD) to my existing Windows 7 installation. I know I can (and should) move my paging file to the SSD: Should the pagefile be placed on SSDs? Yes. Most pagefile operations are small random reads or larger sequential writes, both of which are types of operations that SSDs handle well. In looking at telemetry data from thousands of traces and focusing on pagefile reads and writes, we find that Pagefile.sys reads outnumber pagefile.sys writes by about 40 to 1, Pagefile.sys read sizes are typically quite small, with 67% less than or equal to 4 KB, and 88% less than 16 KB. Pagefile.sys writes are relatively large, with 62% greater than or equal to 128 KB and 45% being exactly 1 MB in size. In fact, given typical pagefile reference patterns and the favorable performance characteristics SSDs have on those patterns, there are few files better than the pagefile to place on an SSD. What I don't know is if I even can put a SuperFetch cache (i.e. ReadyBoost cache) on the solid state drive. I want to get the benefit of Windows being able to cache gigabytes of frequently accessed data on a relativly small (e.g. 30GB) solid state drive. This is exactly what SuperFetch+ReadyBoost (or SuperFetch+ReadyDrive) was designed for. Will Windows offer (or let) me place a ReadyBoost cache on a solid state flash drive connected via SATA? A problem with the ReadyBoost cache over the ReadyDrive cache is that the ReadyBoost cache does not survive between reboots. The cache is encrypted with a per-session key, making its existing contents unusable during boot and SuperFetch pre-fetching during login. Update One I know that Windows Vista limited you to only one ReadyBoost.sfcache file (I do not know if Windows 7 removed that limitation): Q: Can use use multiple devices for EMDs? A: Nope. We've limited Vista to one ReadyBoost per machine Q: Why just one device? A: Time and quality. Since this is the first revision of the feature, we decided to focus on making the single device exceptional, without the difficulties of managing multiple caches. We like the idea, though, and it's under consideration for future versions. I also know that the 4GB limit on the cache file was a limitation of the FAT filesystem used on most USB sticks - an SSD drive would be formatted with NTFS: Q: What's the largest amount of flash that I can use for ReadyBoost? A: You can use up to 4GB of flash for ReadyBoost (which turns out to be 8GB of cache w/ the compression) Q: Why can't I use more than 4GB of flash? A: The FAT32 filesystem limits our ReadyBoost.sfcache file to 4GB Can a ReadyBoost cache on an NTFS volume be larger than 4GB? Update Two The ReadyBoost cache is encrypted with a per-boot session key. This means that the cache has to be re-built after each boot, and cannot be used to help speed boot times, or latency from login to usable. Windows ReadyDrive technology takes advantage of non-volatile (NV) memory (i.e. flash) that is incorporated with some hybrid hard drives. This flash cache can be used to help Windows boot, or resume from hibernate faster. Will Windows 7 use an internal SSD drive as a ReadyBoost/*ReadyDrive*/SuperFetch cache? Is it possible to make Windows store a SuperFetch cache (i.e. ReadyBoost) on a non-removable SSD? Is it possible to not encrypt the ReadyBoost cache, and if so will Windows 7 use the cache at boot time? See also SuperUser.com: ReadyBoost + SSD = ? Windows 7 - ReadyBoost & SSD drives? Support and Q&A for Solid-State Drives Using SDD as a cache for HDD, is there a solution? Performance increase using SSD for paging/fetch/cache or ReadyBoost? (Win7) Windows 7 To Boost SSD Performance How to Disable Nonvolatile Caching

    Read the article

  • My 2009 MacBook Logic board failed - options to proceed and how difficult?

    - by user181061
    Scannerz just gave my MacBook logic board a big fat F! I upgraded from Snow Leopard to Mountain Lion about 3 weeks ago. The system was running short of memory so I upgraded it. The system was running fine for about 2 weeks. Yesterday the thing started acting erratic. A lot of spinning beach balls, delays, and then some errors saying files couldn't be read to or from the drive. I figured the drive was going because the system is over 3 years old. I ran Scannerz on it and it indicated a lot of errors and irregularities. I rescanned it in cursory mode, and none of them were repeatable, just showing up all over the place in different regions of the scan. I went through the docs and they implied either an I/O cable was bad, a connection was damaged, or the logic board was bad. I tossed on my backup of Snow Leopard that I cloned from the original hard drive because I figured Mountain Lion was to blame and booted from the USB drive with the clone on it. It wasn't. I performed scans on every single port, and errors and irregularities that couldn't be repeated were showing up on every single one of them. I then, for kicks, put a CD into the CD player. Scannerz doesn't test optical drives but I figured surely that will work. No it won't. More spinning beach balls and messages telling me it can't be read. It was working fine 3 days ago. I know a lot of people don't like MacBook's, but mine's been great, at least until now. It was working great even with Mountain Lion after the upgrade. The system is a mid-2009 MacBook. In my opinion, it's a complete waste to toss this system. The display is too good, the keyboard works great, and it still looks good, plus this type of MacBook still uses the FireWire 400 port and I use that for Time Machine backups. I've tried reseating the RAM, it didn't do anything. I shut the system down and put in the old RAM, booted to Snow Leopard, and the problems persist. Here are my questions: The Scannerz documentation somewhere said something about the Airport card not being seated properly, but when I go to iFixit, it's apparent, at least I think it's apparent, that this isn't a slot type Airport card that the user can easily install or remove. If the cables or connections to the Airport card are bad, could they be causing this problem. How about any other connections that can be intermittent, failing or erratic? Any type of resets that I could possibly do to get rid of this? For any of those that have replaced a logic board on a MacBook, if this really is the culprit, are there any "gotcha's" I need to be aware of? As an FYI, I replaced the hard drive on an old iBook @500MHz that I had a long time ago, and I replaced the drive on a 1.33GHz PowerBook about 6 years ago. You have to be careful, but using some of the info on web sites like iFixit it's not that hard. Time consuming, but not that hard. The Intel based MacBook's to me look like they're easier to service than either of those. I'm thinking about getting a unit off of eBay that matches mine but has something else wrong with it, like a busted display. I REFUSE to buy a new system. A guy at my office has a 2007 Mac Pro and he can't upgrade to Mountain Lion because his system is "obsoleted." That's ridiculous. If you pay nearly $7,500 for a system it shouldn't be trash just because Apple decides they don't have enough money (sorry for the soap box, but it's true, IMO!) Any input is appreciated.

    Read the article

  • Disable the Splash Screen in Portable Firefox (and Other Portable Apps)

    - by Mysticgeek
    Portable applications are cool because you can run them on any machine from your thumb drive. What isn’t cool is the annoying splash screens that appear when launching the apps. Here’s how to disable the annoyance. In this example we are using Portable Apps version 1.6.1. Disable Splash Screen in Portable Firefox  To disable the Splash Screen, open up Computer and double-click on your flash drive containing PortableApps.   Now browse to the following location… PortableApps\FirefoxPortable\Other\Source In this directory you’ll find the file FirefoxPortable.ini. Open this file with Notepad… This ini file should look similar to the shot below. By default, the line DisableSplashScreen=False … we just need to change False to True. Then make sure to save the change… Now copy the FirefoxPortable.ini file we just edited. Then go back to the main directory PortableApps \ FirefoxPortable and paste it there. That is all there is to it! Now when you launch Portable Firefox, you won’t have to wait while the Splash Screen displays before you can start using it. If you ever want to revert back to having the Splash Screen display, all you’ll need to do is delete FirefoxPortable.ini from PortableApps \ FirefoxPortable. The process is essentially the same in other PortableApps as well. Just follow the steps shown above. For example here we’re disabling the Splash Screen from KeePassPortable by going into the thumb drive PortableApps \ KeePassPortable \ Other \ Source and changing the KeePassPortable.ini file for DisableSplashScreen to equal True. Save it… Then copy it to the main KeePassPortable directory… If you are annoyed by having to see the Splash Screen every time you launch a portable app, following these steps rids the annoyance! Download PortableApps Similar Articles Productive Geek Tips Speed up Visual Studio 2003 Startup Time By Disabling the Splash ScreenSpeed up Visual Studio 2003 Startup Time By Disabling the Splash ScreenUpdate Portable Firefox the Easy WayStart Portable Firefox in Safe ModeInstall and Run Applications from Your iPod, Flash Drive or Mp3 Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer

    Read the article

  • Best solution for multiplayer realtime Android game

    - by piotrek
    I plan to make multiplayer realtime game for Android (2-8 players), and I consider, which solution for multiplayer organization is the best: Make server on PC, and client on mobile, all communition go through server ( ClientA - PC SERVER - All Clients ) Use bluetooth, I don't used yet, and I don't know is it hard to make multiplayer on bluetooth Make server on one of devices, and other devices connect ( through network, but I don't know is it hard to resolve problem with devices over NAT ? ) Other solution ?

    Read the article

  • How can I troubleshoot a "Hardware Malfunction" blue screen?

    - by AaronSieb
    My computer has suddenly started crashing to a blue screen with the following text: hardware malfunction call your hardware vendor for support *the system has halted* The crash occurs randomly during normal use. I have thus far always been able to reproduce it by transferring the contents of a large folder... But I'm not sure if this is caused by the file transfer, or simply because the transfer takes long enough for something else to trigger it. A bit about my hardware I have an dual core Intel CPU, and Asus motherboard. Video card is by nVidia, and connects via PCIe. My hard drives are in pairs, and connect via SATA to a RAID controller on the motherboard. They are configured to use a RAID0 configuration. What I've tried so far There is nothing in the Windows Event Log. WhoCrashed was unable to find any crash records. ScanDisk runs to completion (it launches prior to Windows load) and reports no errors. MemTest reports no errors (to 200% coverage). System temperatures are in the range of 40 to 50 degrees Celsius, with video card temperatures in the range of 60 to eighty degrees Celsius. I have stripped the system down to a minimal configuration (hard drive, video card, one memory module, motherboard, CPU, power supply). The problem still occurrs. However, this has allowed me to rule out a few components: It is not the video card because the problem still occurred after replacing the video card another one I had on hand. It is not the hard drive or anything software related because the problem occurred after a fresh installation of Windows on a replacement hard drive. It is not the hard drive cables because I replaced those with new ones and still had the problem. It is not the power supply because the problem still occurred after replacing the power supply with another one I had on hand. It is probably not the memory because I've tried three different memory modules in three different memory slots and was still able to replicate the issue. Is there anything I can do to confirm what's causing the issue? At the moment it seems as though it must be either the motherboard or CPU, but those are both difficult components to replace... In addition, both components are relatively new (two to three years old). I will gladly edit in any additional information I can get my hands on, and/or focus the question as I can find more details...

    Read the article

  • 6 Things You Shouldn’t Do With Solid-State Drives

    - by Chris Hoffman
    Solid-state drives are different from the mechanical, magnetic hard drives in wide use. Many of the things you’ve done with typical mechanical hard drives shouldn’t be done with newer solid-state drives. Solid-state drives are presented by the operating system the same way mechanical drives are, but they work differently. If you’re a geek, knowing what you shouldn’t do is important.    

    Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >