Search Results

Search found 29588 results on 1184 pages for 'really'.

Page 191/1184 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Putting a versioned-but-not-via-source control project in source control

  - by Emilio

  I have some old code (an old but still maintained VB6 application) that from a source control point of view is the ultimate example of the plumber's plumbing (or cobbler's shoes). It's been version controlled by the approach of making a new directory for each version. Are there any major downsides to taking the following approach? Do the initial check-in of all files Erase all files from the working directory, then copy all files from the next version to the working directory Check them in Goto #2 until done Note that I have a general change log text file which I'd grab the comments from for each version I check in/commit. I don't have (or really care about at this point) comments on a per-file- basis. I don't really know at this point what files have changed between versions, and being lazy I figured I could avoid doing file compares between versions to find out, so that's why I'm taking the approach above. Not to mention that erasing all the files first allows file deletions to be detected. I specifically haven't mentioned which version control tool I'm using since I'm hoping (also assuming, but maybe very incorrectly) that the answer is fairly independent. When I use terms like "check-in" I use them in the general sense, not specific to a tool.

  Read the article

• Redirect from URL with QueryString to the same URL without QueryString

  - by Slauma

  I have a page request with a QueryString, say http://www.xyz.net/Orders.aspx?OrderID=1. The page is displayed in a browser. Now there is an asp:LinkButton on the page which should enable the user to open the page without the QueryString (as if he had entered http://www.xyz.net/Orders.aspx directly in the browser's address bar). I had two ideas: 1) Use the PostBackUrl attribute of the LinkButton: <asp:LinkButton ID="LinkButton1" runat="server" Text="Select" PostBackUrl="~/Orders.aspx" /> 2) Use "RedirectUrl" in an event handler: <asp:LinkButton ID="LinkButton1" runat="server" Text="Select" OnClick="LinkButton1_Click" /> ...and... protected void LinkButton1_Click(object sender, EventArgs e) { Response.Redirect("~/Orders.aspx"); } In both cases the browser's address bar shows http://www.xyz.net/Orders.aspx without the QueryString, as I like to have it. But in the first case the page does not change at all. But it should, because I'm evaluating the QueryString in code-behind and control the appearance of the page depending on whether a QueryString exists or not. The second option works as intended. If I am not wrong the second option requires an additional roundtrip: Browser sends request to server Event handler on server side sends Redirect URL to browser Browser sends again request to the server, but with the new URL Server sends new requested page to browser Is this correct at all? Whereas the first option omits the first two steps in the list above, thus saving the additional roundtrip and resulting in: Browser sends request to the server, but with the new URL (the PostbackURL specified in the LinkButton) Server sends new requested page to browser But, as said, the result isn't the same. I'm sure my try to explain the differences between the two options is wrong somewhere. But I don't know where exactly. Can someone explain what's really the difference? Do I really need this second roundtrip of option (2) to achieve what I want? Thanks in advance!

  Read the article

• How can I Fail a WebTest?

  - by craigb

  I'm using Microsoft WebTest and want to be able to do something similar to NUnit's Assert.Fail(). The best i have come up with is to throw new webTestException() but this shows in the test results as an Error rather than a Failure. Other than reflecting on the WebTest to set a private member variable to indicate the failure, is there something I've missed? EDIT: I have also used the Assert.Fail() method, but this still shows up as an error rather than a failure when used from within WebTest, and the Outcome property is read-only (has no public setter). EDIT: well now I'm really stumped. I used reflection to set the Outcome property to Failed but the test still passes! Here's the code that sets the Oucome to failed: public static class WebTestExtensions { public static void Fail(this WebTest test) { var method = test.GetType().GetMethod("set_Outcome", BindingFlags.NonPublic | BindingFlags.Instance); method.Invoke(test, new object[] {Outcome.Fail}); } } and here's the code that I'm trying to fail: public override IEnumerator<WebTestRequest> GetRequestEnumerator() { this.Fail(); yield return new WebTestRequest("http://google.com"); } Outcome is getting set to Oucome.Fail but apparently the WebTest framework doesn't really use this to determine test pass/fail results.

  Read the article

• How to dispose a Writeable Bitmap? (WPF)

  - by Mario

  Some time ago i posted a question related to a WriteableBitmap memory leak, and though I received wonderful tips related to the problem, I still think there is a serious bug / (mistake made by me) / (Confusion) / (some other thing) here. So, here is my problem again: Suppose we have a WPF application with an Image and a button. The image's source is a really big bitmap (3600 * 4800 px), when it's shown at runtime the applicaton consumes ~90 MB. Now suppose i wish to instantiate a WriteableBitmap from the source of the image (the really big Image), when this happens the applications consumes ~220 MB. Now comes the tricky part, when the modifications to the image (through the WriteableBitmap) end, and all the references to the WriteableBitmap (at least those that I'm aware of) are destroyed (at the end of a method or by setting them to null) the memory used by the writeableBitmap should be freed and the application consumption should return to ~90 MB. The problem is that sometimes it returns, sometimes it does not. Here is a sample code: // The Image's source whas set previous to this event private void buttonTest_Click(object sender, RoutedEventArgs e) { if (image.Source != null) { WriteableBitmap bitmap = new WriteableBitmap((BitmapSource)image.Source); bitmap.Lock(); bitmap.Unlock(); //image.Source = null; bitmap = null; } } As you can see the reference is local and the memory should be released at the end of the method (Or when the Garbage collector decides to do so). However, the app could consume ~224 MB until the end of the universe. Any help would be great.

  Read the article

• Using CakePHP with GoDaddy IIS 7 IIS7 and Microsoft URL Rewriter

  - by ricky

  Hi, I'm trying to move a CakePHP app from a Windows Apache setup to a GoDaddy shared IIS7 setup. It's been easy to migrate except for the Apache mod_rewrite part -- which obviously wouldn't work in IIS7. I basically have no url rewriting capability, which is crucial for Cake to work. GoDaddy now offers MS URL Rewriter, but they don't offer technical support for it. I haven't seen any blog post that discusses how to do this in detail. I'd really like to avoid third-party software, especially since GoDaddy provides MS URL Rewriter, which ought to be more than sufficient. The mod_rewrite directives that will allow Cake to work on GoDaddy look ridiculously easy (pasted below); can someone help me convert it to a web.config I can use with URL Rewriter? The URL Rewriter manual is really long and complicated. I'd rather not have to read the whole thing if I don't have to. Here's the contents of the apache .htaccess file: <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ /index.php?url=$1 [QSA,L] </IfModule> Here's a link that discusses GoDaddy's limited support for URL Rewriter: http://stackoverflow.com/questions/416727/url-rewriting-under-iis-at-godaddy Many thanks! Rich

  Read the article

• Async.Parallel or Array.Parallel.Map ?

  - by gurteen2

  Hello- I'm trying to implement a pattern I read from Don Syme's blog (http://blogs.msdn.com/dsyme/archive/2010/01/09/async-and-parallel-design-patterns-in-f-parallelizing-cpu-and-i-o-computations.aspx) which suggests that there are opportunities for massive performance improvements from leveraging asynchronous I/O. I am currently trying to take a piece of code that "works" one way, using Array.Parallel.Map, and see if I can somehow achieve the same result using Async.Parallel, but I really don't understand Async.Parallel, and cannot get anything to work. I have a piece of code (simplified below to illustrate the point) that successfully retrieves an array of data for one cusip. (A price series, for example) let getStockData cusip = let D = DataProvider() let arr = D.GetPriceSeries(cusip) return arr let data = Array.Parallel.map (fun x -> getStockData x) stockCusips So this approach contructs an array of arrays, by making a connection over the internet to my data vendor for each stock (which could be as many as 3000) and returns me an array of arrays (1 per stock, with a price series for each one). I admittedly don't understand what goes on underneath Array.Parallel.map, but am wondering if this is a scenario where there are resources wasted under the hood, and it actually could be faster using asynchronous I/O? So to test this out, I have attempted to make this function using asyncs, and I think that the function below follows the pattern in Don Syme's article using the URLs, but it won't compile with "let!". let getStockDataAsync cusip = async { let D = DataProvider() let! arr = D.GetData(cusip) return arr } The error I get is: This expression was expected to have type Async<'a but here has type obj It compiles fine with "let" instead of "let!", but I had thought the whole point was that you need the exclamation point in order for the command to run without blocking a thread. So the first question really is, what's wrong with my syntax above, in getStockDataAsync, and then at a higher level, can anyone offer some additional insight about asychronous I/O and whether the scenario I have presented would benefit from it, making it potentially much, much faster than Array.Parallel.map? Thanks so much.

  Read the article

• pulling an UIImage from a UITextView or UILabel gives white image

  - by user293139

  Hello all, I need to grab an UIImage from a UITextView or UILabel. I've got a method that will pull an image successfully from other types of views ( [UIViewController view], MKMapView, UIButtons) but I am just getting a white rect for my UITextView. I've been banging my head against the wall for a while and suspect something really, really basic. many thanks! @interface TaskAccomplishmentViewController : UIViewController { MKMapView *mapView; UILabel *timeLeftText; UITextView *challengeText; UIButton *successButton; -(void) setChallangeImageToImageFromChallenge { // works // [currChallenge setChallengeImage:[UIImageUtils grabImageFromView:mapView]]; // [currChallenge setChallengeImage:[UIImageUtils grabImageFromView:[self view]]]; // [currChallenge setChallengeImage:[UIImageUtils grabImageFromView:successButton]]; //doesn't work // [currChallenge setChallengeImage:[UIImageUtils grabImageFromView:timeLeftText]]; [currChallenge setChallengeImage:[UIImageUtils grabImageFromView:challengeText]]; } and the grabImage from a UIView code +(UIImage *)grabImageFromView: (UIView *) viewToGrab { UIGraphicsBeginImageContext(viewToGrab.bounds.size); [[viewToGrab layer] renderInContext:UIGraphicsGetCurrentContext()]; UIImage *viewImage = UIGraphicsGetImageFromCurrentImageContext(); UIGraphicsEndImageContext(); return viewImage; }

  Read the article

• Confused about C++'s std::wstring, UTF-16, UTF-8 and displaying strings in a windows GUI

  - by dfrey

  I'm working on a english only C++ program for Windows where we were told "always use std::wstring", but it seems like nobody on the team really has much of an understanding beyond that. I already read the question titled "std::wstring VS std::string. It was very helpful, but I still don't quite understand how to apply all of that information to my problem. The program I'm working on displays data in a Windows GUI. That data is persisted as XML. We often transform that XML using XSLT into HTML or XSL:FO for reporting purposes. My feeling based on what I have read is that the HTML should be encoded as UTF-8. I know very little about GUI development, but the little bit I have read indicates that the GUI stuff is all based on UTF-16 encoded strings. I'm trying to understand where this leaves me. Say we decide that all of our persisted data should be UTF-8 encoded XML. Does this mean that in order to display persisted data in a UI component, I should really be performing some sort of explicit UTF-8 to UTF-16 transcoding process? I suspect my explanation could use clarification, so I'll try to provide that if you have any questions.

  Read the article

• WPF custom BalloonTips problem with multithreading

  - by Erika

  Hi, I have read other related question but i cant really get them to relate to this so I thought it were best to ask, Im pretty new to WPF and so on so please bear with me. I am using this http://www.codeproject.com/KB/WPF/wpf_notifyicon.aspx api to work with custom WPF Windows (in particular FancyBalloon). However, i'm coming across the following problem, I seem unable to start off BalloonTips in a separate thread ( i need this because i'm parsing emails and hence if there are 3 emails for instance, it displays the first email (that works fine), but when it comes to the second email it crashes with a TargetInvocationException , {"Specified element is already the logical child of another element. Disconnect it first."}. Thing is, im supposedly working with the same instance and i have attempted calling it to close it before, disposing it etc but to no avail. (then again if i dispose it, i cant create another instance as apparently WPF UI components must be called from a static thread so throughout the looping of emails + displaying balloon, i am trying to use the same BalloonTip. Any suggestions please? I am really at a loss here and i've been on it for quite a while now :/ I was wondering if there was anyone

  Read the article

• [OffTopic] PhD is it worth it?

  - by Zenzen

  So I'll be graduating next year (hopefully) and lately I started thinking about getting a PhD in computer science (to be more precise I was thinking about something related to "distributed systems", don't have any specific topics yet in mind), but is it really worth it? A PhD course here lasts 4 years and is free IF you're doing the "normal one" (which means you have class from monday to friday) OR you have to pay if you want to study on the weekends. So I've been thinking about getting a normal full time job (as a JEE programmer) and doing my PhD during the weekends OR doing the normal PhD course (mon-fri) and getting a part time job as a software dev (the main reason I want a job is simple - I need to eat). That would give me practical working experience and theoretical knowledge+a PhD, but it would also mean working 7days a week from 9 to 5 for 4 years straight (sounds like an overkill). Is it, job wise, really worth getting a PhD? As an employer do you prefer people with PhDs or MScs? This might be kinda important - I'm not from the US or western europe, how are PhDs from other countries (I am graduating one of the best, if not the best, school in my country but it's still a central european country...) seen? Are they useless? I won't hide it - after graduation I am thinking about moving abroad.

  Read the article

• Windows Workflow Foundation - Application-Integrated Debugging

  - by user292103

  I've got a typical n-tier app that has a heavy workflow component to it, so I'm interested in using WWF. There's a server-side piece that runs as a Windows Service, and there's the client-side piece written in Silverlight. To have a really great, seamlessly integrated experience for my users, what I want is to incorporate both a workflow designer and a workflow debugger into the application. Not Visual Studio, but something tightly integrated right into the app itself. Using the Silverlight client, the user (probably more of a power user) can design workflows. But not only that, they can open a debugger from within the Silverlight client, set breakpoints (which are really remote breakpoints back to the Windows Service), catch in-process workflows, and step through them. Wouldn't that be great? I think I have some idea how I might go about incorporating an integrated designer (use a Silverlight diagramming component, save the diagram to .XAML, parse the .XAML to re-create the diagram, etc., etc.) but how on Earth would I do the debugger? I have no idea how I would do that part. Is there some kind of debugging support engineered into WWF?

  Read the article

• System.Web.Caching vs. Enterprise Library Caching Block

  - by ESV

  For a .NET component that will be used in both web applications and rich client applications, there seem to be two obvious options for caching: System.Web.Caching or the Ent. Lib. Caching Block. What do you use? Why? System.Web.Caching Is this safe to use outside of web apps? I've seen mixed information, but I think the answer is maybe-kind-of-not-really. a KB article warning against 1.0 and 1.1 non web app use The 2.0 page has a comment that indicates it's OK: http://msdn.microsoft.com/en-us/library/system.web.caching.cache(VS.80).aspx Scott Hanselman is creeped out by the notion The 3.5 page includes a warning against such use Rob Howard encouraged use outside of web apps I don't expect to use one of its highlights, SqlCacheDependency, but the addition of CacheItemUpdateCallback in .NET 3.5 seems like a Really Good Thing. Enterprise Library Caching Application Block other blocks are already in use so the dependency already exists cache persistence isn't necessary; regenerating the cache on restart is OK Some cache items should always be available, but be refreshed periodically. For these items, getting a callback after an item has been removed is not very convenient. It looks like a client will have to just sleep and poll until the cache item is repopulated. Memcached for Win32 + .NET client What are the pros and cons when you don't need a distributed cache?

  Read the article

• Entity Framework query not returning correctly enumerated results.

  - by SkippyFire

  I have this really strange problem where my entity framework query isn't enumerating correctly. The SQL Server table I'm using has a table with a Sku field, and the column is "distinct". It isn't a key, but it doesn't contain any duplicate values. Using actual SQL with where, distinct and group by cluases I have confirmed this. However, when I do this: // Not good foreach(var product in dc.Products) or // Not good foreach(var product in dc.Products.ToList()) or // Not good foreach(var product in dc.Products.OrderBy(p => p.Sku)) the first two objects that are returned ARE THE SAME!!! The third item was technically the second item in the table, but then the fourth item was the first row from the table again!!! The only solution I have found is to use the Distinct extension method, which shouldn't really do anything in this situation: // Good foreach(var product in dc.Products.ToList().Distinct()) Another weird thing about this is that the count of the resulting queries is the same!!! So whether or not the resulting enumerable has the correct results or duplicates, I always get the number of rows in the actual table! (No I don't have a limit clause anywhere). What could possibly cause this!?!?!?

  Read the article

• Python - Help with multiprocessing / threading basics.

  - by orokusaki

  I haven't ever used multi-threading, and I decided to learn it today. I was reluctant to ever use it before, but when I tried it out it seemed way to easy, which makes me wary. Are there any gotchas in my code, or is it really that simple? import uuid import time import multiprocessing def sleep_then_write(content): time.sleep(5) f = open(unicode(uuid.uuid4()), 'w') f.write(content) f.close() if __name__ == '__main__': for i in range(3): p = multiprocessing.Process(target=sleep_then_write, args=('Hello World',)) p.start() My primary purpose of using threading would be to offload multiple images to S3 after re-sizing them, all at the same time. Is that a reasonable task for Python's multiprocessing? I've read a lot about certain types of tasks not really getting any gain from using threading in Python due to the GIL, but it seems that multiprocessing completely removes that worry, yes? I can imagine a case where 50 users hit the system and it spawns 150 Python interpreters. I can also imagine that wouldn't be good on a production server. How can something like that be avoided? Finally (but most important): How can I return control back to the caller of the new processes? I need to be able to continue with returning an HTTP response and content back to the user and then have the processes continue doing there work after the user of my website is done with the transaction.

  Read the article

• Problem trying to install PyCurl on Mac Snow Leopard

  - by Ldn

  Hi, My app needs to use PyCurl, so i tried to install it on my Mac but i found a lot of problems and error :( Requirement: First of all i've to say that the version of Python working on my Mac is 32 bit based, because i need to use WxPython, that needs 32 bit Python. For doing this i used: defaults write com.apple.versioner.python Prefer-32-Bit -bool yes To install PyCurl i used: sudo env ARCHFLAGS="-arch x86_64" easy_install setuptools pycurl And the terminal returned: Best match: setuptools 0.6c11 Processing setuptools-0.6c11-py2.6.egg setuptools 0.6c11 is already the active version in easy-install.pth Installing easy_install script to /usr/local/bin Installing easy_install-2.6 script to /usr/local/bin Using /Library/Python/2.6/site-packages/setuptools-0.6c11-py2.6.egg Processing dependencies for setuptools Finished processing dependencies for setuptools Searching for pycurl Best match: pycurl 7.16.2.1 Processing pycurl-7.16.2.1-py2.6-macosx-10.6-universal.egg pycurl 7.16.2.1 is already the active version in easy-install.pth Using /Library/Python/2.6/site-packages/pycurl-7.16.2.1-py2.6-macosx-10.6-universal.egg Processing dependencies for pycurl Finished processing dependencies for pycurl so i thought that pycurl was correctly installed and working. But... But when i started my app, python return me an error: python /Users/lorenzodenobili/Desktop/Python/AGGIORNATORE_PY/Dropbox/wxPython/test.py Traceback (most recent call last): File "/Users/lorenzodenobili/Desktop/Python/AGGIORNATORE_PY/Dropbox/wxPython/test.py", line 20, in <module> import pycurl File "build/bdist.macosx-10.6-universal/egg/pycurl.py", line 7, in <module> File "build/bdist.macosx-10.6-universal/egg/pycurl.py", line 6, in __bootstrap__ ImportError: dlopen(/Users/lorenzodenobili/.python-eggs/pycurl-7.16.2.1-py2.6-macosx-10.6-universal.egg-tmp/pycurl.so, 2): no suitable image found. Did find: /Users/lorenzodenobili/.python-eggs/pycurl-7.16.2.1-py2.6-macosx-10.6-universal.egg-tmp/pycurl.so: mach-o, but wrong architecture Yep, there is something quite big that goes wrong. I really don't have any idea on how to solve this error, so i really need your help! thank you so much!!

  Read the article

• Perl unpack in list context

  - by drewk

  A common 'Perlism' is generating a list as something to loop over in this form: for($str=~/./g) { print "the next character from \"$str\"=$_\n"; } In this case the global match regex returns a list that is one character in turn from the string $str, and assigns that value to $_ Instead of a regex, split can be used in the same way or 'a'..'z', map, etc. I am investigating unpack to generate a field by field interpretation of a string. I have always found unpack to be less straightforward to the way my brain works, and I have never really dug that deeply into it. As a simple case, I want to generate a list that is one character in each element from a string using unpack (yes -- I know I can do it with split(//,$str) and /./g but I really want to see if unpack can be used this way...) Obviously, I can use a field list for unpack that is unpack("A1" x length($str), $str) but is there some other way that kinda looks like globbing? ie, can I call unpack(some_format,$str) either in list context or in a loop such that unpack will return the next group of character in the format group until $str is exausted? I have read The Perl 5.12 Pack pod and the Perl 5.12 pack tutorial and the Perkmonks tutorial Here is the sample code: #!/usr/bin/perl use warnings; use strict; my $str=join('',('a'..'z', 'A'..'Z')); #the alphabet... $str=~s/(.{1,3})/$1 /g; #...in groups of three print "str=$str\n\n"; for ($str=~/./g) { print "regex: = $_\n"; } for(split(//,$str)) { print "split: \$_=$_\n"; } for(unpack("A1" x length($str), $str)) { print "unpack: \$_=$_\n"; }

  Read the article

• Can I autogenerate/compile code on-the-fly, at runtime, based upon values (like key/value pairs) parsed out of a configuration file?

  - by Kumba

  This might be a doozy for some. I'm not sure if it's even 100% implementable, but I wanted to throw the idea out there to see if I'm really off of my rocker yet. I have a set of classes that mimics enums (see my other questions for specific details/examples). For 90% of my project, I can compile everything in at design time. But the remaining 10% is going to need to be editable w/o re-compiling the project in VS 2010. This remaining 10% will be based on a templated version of my Enums class, but will generate code at runtime, based upon data values sourced in from external configuration files. To keep this question small, see this SO question for an idea of what my Enums class looks like. The templated fields, per that question, will be the MaxEnums Int32, Names String() array, and Values array, plus each shared implementation of the Enums sub-class (which themselves, represent the Enums that I use elsewhere in my code). I'd ideally like to parse values from a simple text file (INI-style) of key/value pairs: [Section1] Enum1=enum_one Enum2=enum_two Enum3=enum_three So that the following code would be generated (and compiled) at runtime (comments/supporting code stripped to reduce question size): Friend Shared ReadOnly MaxEnums As Int32 = 3 Private Shared ReadOnly _Names As String() = New String() _ {"enum_one", "enum_two", "enum_three"} Friend Shared ReadOnly Enum1 As New Enums(_Names(0), 1) Friend Shared ReadOnly Enum2 As New Enums(_Names(1), 2) Friend Shared ReadOnly Enum3 As New Enums(_Names(2), 4) Friend Shared ReadOnly Values As Enums() = New Enums() _ {Enum1, Enum2, Enum3} I'm certain this would need to be generated in MSIL code, and I know from reading that the two components to look at are CodeDom and Reflection.Emit, but I was wondering if anyone had working examples (or pointers to working examples) versus really long articles. I'm a hands-on learner, so I have to have example code to play with. Thanks!

  Read the article

• Struggling with currency in Cocoa.

  - by Meltemi

  I'm trying to do something I'd think would be fairly simple: Let a user input a dollar amount, store that amount in an NSNumber (NSDecimalNumber?), then display that amount formatted as currency again at some later time. My trouble is not so much with the setNumberStyle:NSNumberFormatterCurrencyStyle and displaying floats as currency. The trouble is more with how said numberFormatter works with this UITextField. I can find few examples. This thread from November and this one give me some ideas but leaves me with more questions. I am using the UIKeyboardTypeNumberPad keyboard and understand that I should probably show $0.00 (or whatever local currency format is) in the field upon display then as a user enters numerals to shift the decimal place along: Begin with display $0.00 Tap 2 key: display $0.02 Tap 5 key: display $0.25 Tap 4 key: display $2.54 Tap 3 key: display $25.43 Then [numberFormatter numberFromString:textField.text] should give me a value I can store in my NSNumber variable. Sadly I'm still struggling: Is this really the best/easiest way? If so then maybe someone can help me with the implementation? I feel UITextField may need a delegate responding to every keypress but not sure what, where and how to implement it?! Any sample code? I'd greatly appreciate it! I've searched high and low... Edit1: So I'm looking into NSFormatter's stringForObjectValue: and the closest thing I can find to what benzado recommends: UITextViewTextDidChangeNotification. Having really tough time finding sample code on either of them...so let me know if you know where to look?

  Read the article

• Android: Creating a Scrollable Layout

  - by MD

  I'm trying to create a "scrollable" layout in Android. Even using developers.android.com, though, I feel a little bit lost at the moment. I'm somewhat new to Java, but not so much that I feel I should be having these issues--being new to Android is the bigger problem right now. The layout I'm trying to create should scroll in a sort of a "grid". I THINK what I'm looking for is the Gallery view, but I'm really lost as to how to implement it at the moment. I want it to "snap" to center the frame, like in the actual Gallery application. Essentially, if I had a photo gallery of 9 pictures, the idea is to scroll between them up/down AND side to side, in a 3x3 manner. Doesn't need to dynamically adjust, or anything like that, I just want a grid I can scroll through. I'm also not asking for anyone to give me explicit code for it--I'm trying to learn, more than anything. But pointing me in the right direction for helpful layout programming resources would be greatly appreciated, and confirming if it's a Gallery view I'm looking for would also be really helpful. EDIT: To clarify, the goal is to have ONE item on screen at a time. If you scroll between one item and the next, the previous one leaves the screen, and the new one snaps into place. So if it were a photo gallery, each spot on the grid would take up the entire screen size, approximately, and would be flung out of the viewable area when you slide across to the next photo, in either direction. (Photos are just an example for illustration purposes)

  Read the article

• Mimic CALayer shadow properties found in iPhone OS 3.2 for OS 3.1

  - by niblha

  The CALayer shadow properties like shadowOffset, shadowRadius, shadowColor are not available in iPhone OS versions below 3.2 and I'm wondering how I could mimic that functionality for use with 3.1 and below. I want to use this to be able to add drop shadows to UIViews in a clean way so that the shadows are drawn at layer level somehow, and not by drawing it in a view's -(void)drawRect:(CGRect)rect method which requires to shrink the actual views frame to accomodate for the shadow. (This shrinking approach have been proposed in the other UIView drop shadow related questions I found here on SO). I was thinking a layered approach would be cleaner. For example I tried creating subclassing CALayer to which I added a separate shadow layer as a sublayer, but then that would be drawn on top of whatever was draw in the drawRect: method of the UIView that had the main layer as backing layer. I've also tried implementing the subclass CALayer's drawInContext: something like this, - (void)drawInContext:(CGContextRef)ctx { // code to draw shadow for a frame the size of the layer's frame [super drawInContext:ctx]; } But then the shadow is still clipped to the current clipping bounding box of the context, which seems to be the layers own frame. I also had some idea of redirecting the drawing of the main layer to a sublayer, which would be placed above another sublayer which had the shadow drawn onto it. Then I would probably get rid of the clipping and the shadow would be farthest away. But I couldn't really wrap my head around how I would do that, and it doesn't really feel like a clean approach. Any ideas on how to go about this? Just to make clear how my UIView drop shadow related question is different from the other ones I found here on SO; I do not want to shrink the actual drawing frame of a UIView to accomodate for a shadow. I want it to somehow be on a separate layer in the background, whithout beeing clipped.

  Read the article

• How to best handle exception to repeating calendar events

  - by blcArmadillo

  I'm working on a project that will require me to implement a calendar. I'm trying to come up with a system that is very flexible: can handle repeating events, exceptions to repeats, etc. I've looked at the schema for applications like iCal, Lotus Notes, and Mozilla to get an idea of how to go about implementing such a system. Currently I'm having trouble deciding what is the best way to handle exceptions to repeating events. I've used databases quite a bit but don't have a ton of experience with really optimizing everything so I'm not sure which method of the two I'm considering would be optimal in terms of overall performance and ability to query/search: Breaking the repeating event. So taking the changing the ending date on the current row for the repeating event, inserting a new row with the exception, and adding another row continuing the old sequence. Simply adding an exception. So adding a new row with some field that indicates it as an override. So here is why I can't decide. Method one will result in a lot more rows since each edit requires 2 extra rows as apposed to only one row by the second method. On the other hand I think the query to find an event would be much simper, and thus possibly faster(?) using the first method. The second method seems like it will require more calculating on the application server since once you get the data you'll have to remove the intersection of the two rows. I know databases are often the bottleneck for websites and while I'm sure a lot of you are thinking either is fine because your project will probably never get large enough for the difference in efficiency to really matter, I'd still like to implement the best solution. So what method would you guys pick, or would you do something completely different? Also, as a side note I'll be using MySQL and PHP. If there is another technology that you think would be better suited for this, especially in the database area, please mention it. Thanks for the advice.

  Read the article

• using paperclip with secure and non-secure files

  - by crankharder

  First off, we have this namespaced/sti'd structure for our different types of 'Media' Media< Ar::Base Media::Local < Media Media::Local::Image < Media::Local Media::Local::Csv < Media::Local etc... etc.. This is excellent since a user can have many media, and how we display each piece of media is based on the class name and a co-responding partial. But what if we have some Csv's that need to be secure? That is, they can't reside inside of public. I really hate the idea of branching Media again and doing something like this: Media::Secure < Media Media::Secure::Image < Media::Secure Media::NotSecure < Media Media::NotSecure::Image < Media::NotSecure ...where Secure and NotSecure would have different params passed to has_attached_file. Now there are two classes that represent Image and it makes my view/helper system that much more complicated -- not to mention it feels very obtuse. What I would really like to do is be able to change where certain Paperclip::Attachment objects get saved before they get saved (e.g. anything uploaded through foo_secure_action) -- but I can't seem to make this work. Paperclip::Attachment has an @options hash with :path and :url, but changing those before it is saved doesn't have an effect on where it actually gets set. Even if this is possible, I'm not sure if it would have further consequences... I'm open to alternative ideas for structuring this data, but for the moment I like the idea of using STI for this situation.

  Read the article

• Are endless loops in bad form?

  - by rlbond

  So I have some C++ code for back-tracking nodes in a BFS algorithm. It looks a little like this: typedef std::map<int> MapType; bool IsValuePresent(const MapType& myMap, int beginVal, int searchVal) { int current_val = beginVal; while (true) { if (current_val == searchVal) return true; MapType::iterator it = myMap.find(current_val); assert(current_val != myMap.end()); if (current_val == it->second) // end of the line return false; current_val = it->second; } } However, the while (true) seems... suspicious to me. I know this code works, and logically I know it should work. However, I can't shake the feeling that there should be some condition in the while, but really the only possible one is to use a bool variable just to say if it's done. Should I stop worrying? Or is this really bad form. EDIT: Thanks to all for noticing that there is a way to get around this. However, I would still like to know if there are other valid cases.

  Read the article

• Rotate UIViewController to counteract changes in UIInterfaceOrientation

  - by Peter Hajas

  Hi there, I've been searching a lot on this, and can't find anything to help me. I have a UIViewController contained within another UIViewController. When the parent UIViewController rotates, say from Portrait to LandscapeLeft, I want to make it look as though the child didn't rotate. That is to say. I want the child to have the same orientation to the sky regardless of the parent's orientation. If it has a UIButton that's upright in Portrait, I want the right-side of the button to be "up" in UIInterfaceOrientationLandscapeLeft. Is this possible? Currently, I'm doing really gross stuff like this: -(void) rotate:(UIInterfaceOrientation)fromOrientation: toOr:(UIInterfaceOrientation)toOrientation { if(((fromOrientation == UIInterfaceOrientationPortrait) && (toOrientation == UIInterfaceOrientationLandscapeRight)) || ((fromOrientation == UIInterfaceOrientationPortraitUpsideDown) && (toOrientation == UIInterfaceOrientationLandscapeLeft))) { } if(((fromOrientation == UIInterfaceOrientationLandscapeRight) && (toOrientation == UIInterfaceOrientationPortraitUpsideDown)) || ((fromOrientation == UIInterfaceOrientationLandscapeLeft) && (toOrientation == UIInterfaceOrientationPortrait))) { } if(((fromOrientation == UIInterfaceOrientationPortrait) && (toOrientation == UIInterfaceOrientationLandscapeLeft)) || ((fromOrientation == UIInterfaceOrientationPortraitUpsideDown) && (toOrientation == UIInterfaceOrientationLandscapeRight))) { } if(((fromOrientation == UIInterfaceOrientationLandscapeLeft) && (toOrientation == UIInterfaceOrientationPortraitUpsideDown)) || ((fromOrientation == UIInterfaceOrientationLandscapeRight) && (toOrientation == UIInterfaceOrientationPortrait))) { } if(((fromOrientation == UIInterfaceOrientationPortrait) && (toOrientation == UIInterfaceOrientationPortraitUpsideDown)) || ((fromOrientation == UIInterfaceOrientationPortraitUpsideDown) && (toOrientation == UIInterfaceOrientationPortrait))) { } if(((fromOrientation == UIInterfaceOrientationLandscapeLeft) && (toOrientation == UIInterfaceOrientationLandscapeRight)) || ((fromOrientation == UIInterfaceOrientationLandscapeRight) && (toOrientation == UIInterfaceOrientationLandscapeLeft))) { } } which seems like a perfectly good waste of code. Furthermore, I was planning on using CGAffineTransform (like cited here: http://www.crystalminds.nl/?p=1102) but I'm confused about whether I should change the view's dimensions to match what they will be after the rotation. The big nightmare here is that you have to keep track of a global "orientation" variable. If you don't, the illusion is lost and the ViewController is rotated into whatever. I could really use some help on this, thanks!

  Read the article

• Extract known pattern substring from NSString (without regex)

  - by d11wtq

  I'm really tempted to drop RegexKit (or my own libpcre wrapper) into my project in order to do this, but before I do that I want to know how Cocoa developers manage to do half of this basic stuff without really convoluted code or without linking with RegexKit or another regular expression library. I find it gobsmacking that Cocoa does not include any regular expression matching features. I've so accustomed to using regular expressions for all kinds of things that I'm lost without them. I can do what I need without them, but the code would be rather convoluted. So, Cocoa devs, I ask you, what's the "Cocoa way" to do this... The problem is an everyday problem in programming as far as I'm concerned. Cocoa must have ways of doing this with the built-in features. Note that the position of the elements I want to match changes, and sometimes "quotes" are present. Whitespace is variable. Take the following strings: Content-Type: application/xml; charset=utf-8 Content-Type: text/html; charset="iso-8859-1" Content-Type: text/plain; charset=us-ascii Content-Type: text/plain; name="example.txt"; charset=utf-8 From all of these strings, how would you go about determining the mime type (e.g. text/plain) and the charset (e.g. utf-8) using just the built-in Cocoa classes? I'd end up performing a series of -rangeOfString: and substring calls, with conditional checks to deal with the optional quotes etc. Is there a way to do this with NSScanner? The NSScanner class seems to have a pretty naive API to me. Something like C's sscanf() that works for NSString objects would be an ideal fit. Most of my string parsing needs are simple such as this example so maybe regular expressions, while I'm accustomed to them, are overkill?

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >