Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 191/365 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

  • Ubunti 12.10 wake on lan not working with Realtek 8139

    - by f.cipriani
    My pc doesn't wake up when receiving a magic packet from a pc connected to the same router. ethtool: fcipriani@ubuntu:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I have enabled all the wake up features in my bios, and I have verified the magic packet gets to the pc. I suspect the main problem is that the NIC light is completely turned off after the shutdown, but even after spending a lot of time researching I can't understand if this is a limit of my network card, my mobo, or something in the OS which needs to be configured correctly in order to leave the NIC in stand by mode with the light flashing. the NIC is Realtek 8139, the motherboard Asus P5L13L-X

    Read the article

  • ATI Proprietary Driver Over/Underscan setting ignored after reboot

    - by Lassi
    I installed the proprietary driver (fglrx-updates) on Ubuntu 12.10 64-bit for my graphics card (ATI Radeon HD 7570). I am using two displays, one connected with DVI, one with HDMI. I set the desktop to be expanded to both screens and disabled the under scan for the HDMI screen, which is always for some reason enabled on HDMI screens. Now the issue. Everything was fine until I restarted my computer. After reboot, the screen connected with HDMI cable had the black borders again, meaning that the under scan is again enabled. I checked the ATI CCC, and under scan was disabled. However, moving the slider to enable under scan and then back to zero fixed the issue -- temporarily. The same issue is repeated every time I restart my computer. The settings remains the same, but the computer seems to ignore it. Any ideas how I could solve the issue?

    Read the article

  • Wireless not working, no driver showing in the Additional Drivers window

    - by edit lopez
    I am a new user of Ubuntu. I have a Asus Q501L laptop that came preinstalled with Windows 8, but I wanted to move from Windows and try something new, so I just decided to install Ubuntu without thinking to much about it. The problem I have is that I can't install the additional drivers. When I go to to Additional Drivers nothing appears, it just says: no proprietary drivers are in use and in small letters continues: a proprietary driver has private code that Ubuntu developers can't review and improve. security and others updates are dependent on drivers vendor.. I can't even use the wireless connection. I really don't know what to do. I tried to download the drivers from Asus, but when I tried to install them it said: an error occurred while loading the archive. Also I don't know the model of the PC wireless card. If there is something I can do to find out that please tell me. Thanks!

    Read the article

  • Hard-copy approaches to time tracking

    - by STW
    I have a problem: I suck at tracking time-on-task for specific feature/defects/etc while coding them. I tend to jump between tasks a fair bit (partly due to the inherit juggling required by professional software development, partly due to my personal tendancy to focus on the code itself and not the business process around code). My personal preference is for a hard-copy system. Even with gabillions of pixels of real-estate on-screen I find it terribly distracting to keep a tracking window convienient; either I forget about it or it gets in my ways. So, looking for suggestions on time-tracking. My only requirement is a simple system to track start/stop times per task. I've considered going as far as buying a time-clock and giving each ticket a dedicated time-card. When I start working on it, punch-in; when done working, punch-out.

    Read the article

  • QotD: Sharat Chander on Java Embedded @ JavaOne

    - by $utils.escapeXML($entry.author)
    This year, JavaOne is expanding to offer business leaders a chance to participate, as well. I'm very proud to announce the deployment of "Java Embedded @ JavaOne." With the explosion of new unconnected devices and data creation, a new IT revolution is taking place in the embedded space. This net-new conference will specifically contain business content addressing the growing embedded ecosystem.As part of the "Java Embedded @ JavaOne" call-for-papers (CFP), interested speakers can continue forward and make business submissions, and due to high interest they also have the additional opportunity to make technical submissions for the flagship JavaOne conference, but _*ONLY*_ for the "Java ME, Java Card, Embedded and Devices" track. Sharat Chander in a set of posts on Java Embedded @ JavaOne to the JUG Leaders mailing list.

    Read the article

  • Tutorial (or livedisk) for multiseat setup with dual-head display supporting openGL direct rendering?

    - by Tobias Kienzler
    I'm currently running Ubuntu 10.10 (64 bit), the GPU is an ATI Radeon HD 4290 onboard a ASUS M4A89GTD PRO/USB3 mainboard. The Ubuntu wiki doesn't cover 10.10 yet and I also don't know if that method would support direct rendering. I heard mentions of xephyr and xgl, what are the differences? Where should I start? I tried the mdm livedisk but that doesn't boot. I'm also willing to try a different distribution if necessary. Edit: 1 Will the HowTo: A well performing, full eye-candy, accelerated pseudo-multiseat setup on a single dualhead GPU. for Ubuntu 9.04 still work? I'm afraid it omits how to setup two input devices and sound however... Edit: 2 http://multiseatonlinux.blogspot.com/2010/06/part-1-setting-up-base.html covers 10.10 but requires pinning gdm. Is that circumvenatable? Also how does that setup have to be modified for dual-head?

    Read the article

  • Ubuntu 12.10 Nvidia GT555M Bumblebee

    - by herczigem
    I have laptop with Nvidia GT 555M video card. System Ubuntu 12.10, kernel Linux 3.5.0-17-generic step what i do: sudo add-apt-repository ppa:bumblebee/stable sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install bumblebee bumblebee-nvidia restart system optirun glxgears This message give me: Cannot access secondary GPU - error: Could not load GPU driver Aborting because fallback start is disabled. Open sudo gedit /etc/bumblebee/bumblebee.conf and change Driver= to Driver=nvidia and KernelDriver=nvidia-current to KernelDriver=nvidia. Restart the system and run optirun glxgears. This message gives me: The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect. Could not connect to bumblebee daemon - is it running? Anybody have idea?!

    Read the article

  • security cameras and Ubuntu

    - by Josh
    I am setting up a server of sorts and chose ubuntu for the OS as my dad has it on a few computers. I am unimpressed with Windows or MAC due to all the add-ons and complexity of it when all I want is something simple. The system will have 3 purposes, storing my wife's photography work (she is a professional photographer) storing music for quick access to our entertainment system (will be running the system thru the tv in our living room and thus though our surround sound) and will also serve as a DVR unit for a home security system I am going to put together. My question is what sort of software options are there for the Ubuntu system as far as a DVR with frame by frame playback. It does not need to be fancy but of course a variety of options are a nice touch.

    Read the article

  • Aser Aspire 3690 WIreless Not working, new Ubuntu user

    - by drew
    I don't know that much about Ubuntu, but I put it on an Acer Aspire 3690 Laptop (replaced Win Vista). Everything seems to work fine, but the wireless connection. It says "FIRMWARE MISSING". It detects that I have a wireless card, so I don't know what to do. I've already used the "ADDITIONAL DRIVERS" thing, and that didn't work. I've googled and have not found anything helpful. I don't really know what I'm doing, so can your directions please be kindergarden level? Thank you very much for any help you can provide. I really appreciate it.

    Read the article

  • jWIN JC-AM100 not working

    - by Tony Kilgore
    jWIN JC-AM100 not working in skype, i just see black and the little light that comes on the webcam showing its in use does not come on ether, but it works with cheese but its upside down. =[ lsusb: Bus 002 Device 012: ID 093a:2620 Pixart Imaging, Inc. Bus 002 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. Bus 002 Device 005: ID 046d:c05a Logitech, Inc. Optical Mouse M90 Bus 002 Device 004: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub<

    Read the article

  • Instance Patching Demo for BPM 11.1.1.7 by Mark Nelson

    - by JuergenKress
    BPM 11.1.1.7 has a new ‘instance patching and migration’ feature that allows you to apply changes to running instances of processes (without changing the revision of the process) and/or to migrate running instances between revisions of a process. There is a short viewlet demonstration posted here, but there is unfortunately no sound. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: Mark Nelson,BPM,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • Broadcom STA driver doesn't work well with BCM4313

    - by Oli
    Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

    Read the article

  • Software requirements specification, please help!

    - by Nicholas Chow
    For a school project, I had to create a SRS for a "fictional" application. However they did not show us what it exactly entails, and were very vague with explanations. The SRS asked of us has to have at least 5 functional requirements, 5 non functional requirements and 1 constraint. Now I have tried my best to make one however I think there are still a lot of mistakes in it. Could you all please look at it and provide me with some feedback on which parts I can improve or just tell me which parts are plain out wrong and how to make it better? (The project has a maximum of 12 pages so it is a bit long, I will post it below. FR1 Registration of Organizer FR1 describes the registration of an Organizer on CrowdFundum FR1.1 The system shall display a registration form on the website. FR1.2 The system shall require a Name, Username, Document number passport/ID card, Address, Zip code, City, Email address, Telephone number, Bank account, Captcha code on the registration form when a user registers.

    Read the article

  • PIN request at each login after update to Maverick

    - by Giacomo Verticale
    I have a netbook with included 3G mobile broadband card (Huawei E620). I have configured the broadband network connection in the Network Manager and it works perfectly. However since Maverick upgrade, a window appears just after login I asking for the SIMcard PIN. This happens every time I log in and did not happen with Lucid. Note that the PIN is stored in the configuration of the mobile broadband connection and Lucid was satisfied with that. Is there a way to prevent this request or, at least, to have the system rember the PIN and stop ansking for it? If it may be useful, the broadband network connection is configured as not being available for other users. Also, I would like to keep the SIMcard asking for the PIN; only I do not want to insert it manually at login.

    Read the article

  • Does FFMpeg support gpu acceleration of media encoding/decoding?

    - by Jason123
    I was wondering if ffmpeg supported gpu acceleration. I was reading on their websites and came across contradicting information. http://www.ffmpeg.org/general.html#Video-Codecs -H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (VDPAU acceleration) http://ffmpeg.org/trac/ffmpeg/wiki/x264EncodingGuide -Will a graphics card make x264 encode faster? No. libx264 doesn't use them (at least not yet). There are some proprietary encoders that utilize the GPU, but that does not mean they are well optimized, though encoding time may be faster; and they might be worse than x264 anyway, and possibly slower. Regardless, FFmpeg today doesn't support any means of gpu encoding, outside of libx264. If not, is there any way to add gpu acceleration to h.264 encoding/decoding?

    Read the article

  • How to use MythBuntu to send TV signal to a 2nd frontend

    - by Mark Preston
    I guess the a MythTV or MythBuntu backend acts as a "server" for the frontends. I have MythBuntu installed. It runs fine, I can tune live TV, hear the sound, etc. To get this to work, I had to config the Wired Network IP4V settings to Method: Link-Local Only. The Local Backend IP address is: 127.0.0.1 and the info (bottom of screen) says that if there is another frontend, that this IP add. must be changed. 1 - Does this mean changed to the IP address of the 2nd frontend? 2 - What "Method" do I use to make 2 or more frontends? 3 - I have an ethernet switch which currently "sees" the tv signal, sends it to the computer's ethernet port where Mythbuntu makes use of it. 4 - How do I set up the Myth to send it's output (the tv shows) to both televisions? If you know of a How-To, or website, please give the URL or identifying keywords.

    Read the article

  • Emailing Interviewer after interview regarding technical solution

    - by Raghav Shankar
    I had an interview yesterday where I was given a programming problem and I was asked to figure the optimal solution for it. I gave a solution that worked in linear time, but used 2 loops (not inner loops). At the end of the interview, the interviewer saw I was interested in solving the problem, so he said the optimal solution uses only one loop and has linear complexity and at the end of the interview I had asked for his card and he gave one to me. I think I might have figured out a solution and I was wondering if it's alright to email the recruiter thanking him for his time and also mentioning about the solution I had figured out?

    Read the article

  • Should I start learning WPF?

    - by questron
    Hi, I've been studying C# for about 2 months so far, I have a few years experience programming however in VBA and VB6, but nothing too in depth (I've written simple tools, but nothing too advanced). I am very interested in WPF and I was wondering whether it would be too early for me to start learning how to use it? For reference, I am about 400 pages into 'Head First C#' and I've written a program that can quickly tag image files for moving into a predefined folder or to delete (Allows the user to pull images off of a camera memory card and sort VERY quickly). That's the most advanced app I've written.

    Read the article

  • Replace Broadcom "wl" driver with "b43"

    - by Laszlo Boros
    I'm using Ubuntu 10.04.4 LTS, and in my laptop there is a Broadcom BCM4312 wlan card. lspci output: 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) Subsystem: Broadcom Corporation Device 04b5 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f4500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 81-ac-1d-ff-ff-12-54-92 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, ssb So as you can see, the current (and default) driver is wl - installed with jockey. But I have another Ubuntu based distribution on my laptop (BackTrack linux), which is also 10.04, but it has the b43 driver installed and the overall performance is MUCH better. So I would like to install it on this OS too, but even google didn't help me. So my question is how to install the latest b43 driver on my Ubuntu?

    Read the article

  • Shotwell issues in 11.10

    - by John Speed
    I had used Shotwell happily previously then updated to Natty last week. Despite Shotwell showing on the tool bar on screen, when clicked, nothing happened, and it ignored my SD card when loaded. I read all sorts of remedies and tried everything to no avail. When I next turned on the laptop, Ocelot was available so with nothing to loose, I upgraded again. Still no Shotwell. Tried all the new fixes and now atleast I have the icon pictures but nothing behind it. When I ran the command to load the log file, Shotwell loaded and all my photos are present. Exited programme, and now nothing. Can anyone tell me where I have gone wrong please.

    Read the article

  • Ubuntu 12.04: Unity stuck in 2D. Compiz crashes

    - by JohnK.
    I have been trying to get Unity to work in 3D and hardware wise there should be no problem. I have the 310.14 NVIDIA driver and am using a GTX660-Ti card. Output of: unity --replace Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Fatal: No composite extension compiz (composite) - Error: initScreen failed compiz (core) - Error: Couldn't activate plugin 'composite' compiz (core) - Error: Plugin 'composite' not loaded. compiz (core) - Error: InitPlugin 'opengl' failed compiz (core) - Error: Couldn't activate plugin 'opengl' compiz (core) - Error: Plugin 'composite' not loaded. compiz (core) - Fatal: No composite extension compiz (core) - Fatal: No composite extension Segmentation fault (core dumped) What am I missing to get this working?

    Read the article

  • Jr developer report bug to potential future boss [on hold]

    - by Cryptoforce
    I applied for a Web developer job in Quebec City, and they called me back for a phone interview. Everything went well, it last for over a hours, and at the end they ask me to send code simple and a portfolio, but in my research about the company and their products I found a PHP error(bug) in their app. Should I tell them or I would that make me look like a total jerk and blow my chance for a interview? I know it might sound stupid. As a junior developer I did 2 interviews they didn't go so well. I am very interested in this position part of my question is like a big lack of confidence so to make it short should I tell them about where is the error and how to fix it? Thanks

    Read the article

  • Can't get my Blue Snowflake Mic to work

    - by TheNerdAL
    It was working fine when I bought it. I think it was an update or something that made it stop. I don't think the Mic is broken, at least I hope not. Can anyone help? Please? I need it before tommorrow. I'm working on a video. I get this when I check the terminal for what USB devices are connected: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 2525:8912 Bus 003 Device 003: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader Bus 003 Device 002: ID 056a:00d2 Wacom Co., Ltd Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks.

    Read the article

  • How easily recognized are new TLDs?

    - by Ryan Muller
    I'm interested in purchasing a domain name for a new service I intend to market. I know that .com is instantly recognizable as a domain ending, and if I see stackoverflow.com I know it's a web address. However, I also recognize strings like github.io and mysite.tk as domains, since I've worked with domains like these. To the average member of the public, if one sees an address ending in .io or similar, non-mainstream TLD (e.g. on a billboard or business card) would they immediately know it's a URL and to type it into a browser? Or are these new domains only useful 1) for a technical audience or 2) when you will be primarily promoting your site through links and not print?

    Read the article

  • IKEA Lamps Hacked into Flexible Speaker Mounts

    - by Jason Fitzpatrick
    This simple hack combines the swing arms of two IKEA work lamps with a set of computer speakers for flexible and easily adjustable sound. IKEAHackers reader Bill Dwyer wanted an easy way to get the speakers off his desk but still be able to easily adjust them. By hacking apart two IKEA work lamps (he removed the light assembly and snipped the wires off) he was able to attach his computer speakers to the arms and, in the process, get them off the desk. The arms make it super simple to adjust the speakers exactly where he wants them, including towards other parts of his office/apartment. Hit up the link below to check out more pictures and read Bill’s instructions. Very Flexible Computer Speaker Mounts [IKEAHackers] Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed How to Run Android Apps on Your Desktop the Easy Way HTG Explains: Do You Really Need to Defrag Your PC?

    Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >