Search Results

Search found 39405 results on 1577 pages for 'zeta two'.

Page 191/1577 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

  • Device Manager - does USB listing look right?

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Graph coloring Algorithm

    - by Amitd
    From wiki In its simplest form, it is a way of coloring the vertices of a graph such that no two adjacent vertices share the same color; this is called a vertex coloring. Similarly, an edge coloring assigns a color to each edge so that no two adjacent edges share the same color, and a face coloring of a planar graph assigns a color to each face or region so that no two faces that share a boundary have the same color. Given 'n' colors and m vertices, how easily can a graph coloring algorithm be implemented? Lan

    Read the article

  • Please help. Creating threads and wait till finsh

    - by Raj Aththanayake
    Hi I have two method calls that I want to call using two threads. Then I want them to wait till method executions get completed before continuing. My sample solution is something like below. public static void Main() { Console.WriteLine("Main thread starting."); String[] strThreads = new String[] { "one", "two" }; String ctemp = string.Empty; foreach (String c in strThreads) { ctemp = c; Thread thread = new Thread(delegate() { MethodCall(ctemp); }); thread.Start(); thread.Join(); } Console.WriteLine("Main thread ending."); Console.Read(); } public static void MethodCalls(string number) { Console.WriteLine("Method call " + number); } Is this will do the job? Or is there another better way to do the same thing?

    Read the article

  • How to get all rows but specifc columns from a DataTable?

    - by Oliver
    Currently i am having some problems with getting some data out of a DataTable by selecting all rows, but only some columns. To be a little more descriptive here is a little example: Sample Data | ID | FirstName | LastName | Age | +----+-----------+----------+-----+ | 1 | Alice | Wannabe | 22 | | 2 | Bob | Consumer | 27 | | 3 | Carol | Detector | 25 | What i have So what we got from our GUI is a IEnumerable<DataColumn> selectedColumns and there we'll find two elements (FirstName and LastName). Now i need some result which contains all rows, but only the above two columns (or any other list of selected columns). So far i already used LINQ on several one dimensional objects, but this two dimensional object gives me a little headache. // The hard-coded way Table.AsEnumerable().Select(row => new { FirstName = row[1], LastName = row[2] }); // The flexible way Table.AsEnumerable().Select(row => row ???) But how can i now say, which columns from row should be selected by using my selectedColumns?

    Read the article

  • Mix RGB colors (L*a*b*)

    - by Samuel
    Hello! Basically I want two mix two colours color1 and color2. Since simple calculation's bring up stuff like blue+yellow = grey ((color1.r + color2.r)/2 etc) i did some research and found that apparently mixing colors in order for the mixed color to look like we expect it too (e.g. blue+yellow = green) isn't that straight forward. What another stackoverflow post taught me was that in order two achieve the mixture correctly i'd have to use the L*a*b* space / CIELAB and linked to the wikipedia page about this topic. I found it informative but i couldn't really understand how to convert RGB to (sRGB and than to) L*a*b* - how to mix the obtained colors and how to convert back I hope somebody here can help me Thanks, Samuel

    Read the article

  • Redundant Connection Issue

    - by Adam
    I'm trying to set up a redundant connection for our web hosting servers. I have a BGP-capable router connecting two lines from two separate ISP's, one fiber (primary), one DSL (failover). I've already confirmed that I can push routes into the DSL ISP's system, so long as they aren't malicious. My question is, what do I need to do on the fiber side to make those IP's routable through the DSL? Is there something I'm missing?

    Read the article

  • Networking switch setup

    - by Crash893
    I have two 48 port gigabit netgear switches with 2 SFP ports each (i also have two Mini-GBIC copper transceiver modules) Is it best to set the ports up by using the built in ports (ie plug port 1 of switchB into port 48 of switchA and port1 of switchA into the router) or is there an advantage to using the mini-gbic? (lets call the sfp ports 49 and 50) router - port 49 on switchA, port 50 switchA - port 49 SwitchB

    Read the article

  • Algorithm for measuring distance between disordered sequences of strings

    - by Kinopiko
    The Levenshtein distance gives us a way to calculate the distance between two similar strings in terms of disordered individual characters: quick brown fox quikc brown fax The Levenshtein distance = 3. What is a similar algorithm for the distance between two strings with similar subsequences? For example, in quickbrownfox brownquickfox the Levenshtein distance is 10, but this takes no account of the fact that the strings have two similar subsequences, which makes them more "similar" than completely disordered words like quickbrownfox qburiocwknfox and yet this completely disordered version has a Levenshtein distance of eight. What distance measures exist which take the length of subsequences into account, without assuming that the subsequences can be easily broken into distinct words?

    Read the article

  • Best practice for sharing code between OSX and IOS app

    - by Alberto
    I am creating an iOS version of an existing OSX app and am wondering what the best practices are for sharing code between the two. The code in question only depends on the foundation framework and the Sqlite dynamic library, so it should compile and run fine on both platforms. It seems to me there are three possible options: Create a single project with and OSX and an IOS targets, add source files to each target as appropriate. Create two separate projects for the OSX and IOS apps, put shared code in a common location in the workspace and add it as reference to both projects. Create three projects: OSX app, IOS app and a shared static library with an OSX and an IOS targets; add each library target to the respective application. Is there any reason one of the above approaches may be better than the other two? If not, option 2 seems to be the simplest by far.

    Read the article

  • Bad resolution from Displayport converter on third of three screens

    - by Carl
    I am currently using three screens at the same time with my ATI 5770 & an active Displayport converter. The thing is that the third screen (the one using the active Displayport converter) is showing terrible resolution compared to my other two screens. The third screen is a Samsung Syncmaster P23. Two of my screens have a max resolution of 1920x1080, meanwhile the third on is only capable of 1600x1200. Do any of you know a solution to this problem?

    Read the article

  • Multiple nt52 entries in bootmgr

    - by SLaks
    I have a machine with Windows XP, Server 2003 R2, and Server 2008 R2. Right now, bootmgr has one entry for Server 2008 R2 and one entry for ntldr, which then leads to the ntldr boot.ini menu. Is it possible to add two different nt52 entries on two partitions so that I can access all three OSes from the bootmgr menu? Right now, Server 2008 and XP are in logical drives on an extended partition, but (I assume) I can image them onto basic partitions if necessary.

    Read the article

  • OpenMP timer doesn't work on inline assembly code?

    - by Brett
    I'm trying to compare some code samples for speed, and I decided to use the OpenMP timer since I'll eventually be multi threading the code. The timer works great on two of my four code snippets, but not on the other two start=omp_get_wtime(); /*code here*/ finish = omp_get_wtime() - start_time; The four code here sections are serial code, xmmintrin.h code, and two inline assembly codes. The serial and xmminstrin.h code are able to be timed, but the inline assembly codes returns -1.#IND00 for a time. I can't seem to figure out why this is? Thanks for any help or suggestions!

    Read the article

  • Django ORM QuerySet intersection by a field

    - by Sri Raghavan
    These are the (pseudo) models I've got. Blog: name etc... Article: name blog creator etc User (as per django.contrib.auth) So my problem is this: I've got two users. I want to get all of the articles that the two users published on the same blog (no matter which blog). I can't simply filter the Article model by both users, because that would yield the set of Articles created by both users. Obviously not what I want. but can I filter somehow to get all of the articles where a field of the object matches between the two querysets?

    Read the article

  • Master's in Software Engineering vs. Master's in Computer Science: which degree is preferred by empl

    - by dbarker
    I've been building software professionally for 7 years and am considering a master's degree. I understand the difference between these two degrees as simply: MSCS is the theory while MSE is the practice. I'm equally interested in both and would be happy with either, although I'm curious how these degrees rank in the eyes of a potential employer. I could see two views that a hiring manager could possibly take: a MSCS is loftier and has an implied knowledge of Software Engineering an MSE is more practical and has an implied knowledge of Computer Science In my own experience I've seen both MSCS degree holders than cannot program at all while others are among the best programmers I've met, so of course actual ability will depend on the individual. My question is about the "on paper" value of these two degrees when seeking a job. All things considered, is one degree more hirable, higher-paying than the other?

    Read the article

  • How do I find a file that begins with a phraze in Windows Search?

    - by plasmuska
    Hi Guys, What is the syntax for searching a file with file name that STARTS with a certain phrase? Example: I have two files: 60933 blahblah.xls PZ 60933 blahblah.xls I would like to search only for the first one but Windows Search always returns two results. I have tried these but none of them seem to work: filename:60933 filename:^60933* filename:60933..xls My setup: Windows XP Pro CZ, Windows Search 4, files are located on indexed network share.

    Read the article

  • Simultaneonus NX client connections

    - by Ja Sam
    I would like to have two separate NX connections for the same username going from one dual-monitor client to NX server. The idea is to get two separate same username KDE sessions. When I try to do it the most obvious way (by starting one NX client on each separate monitor), second connection just over takes the first one. Any idea on how to do this?

    Read the article

  • Which Windows 8 edition should I update to from Windows 7 Home Premium?

    - by Max
    I have Windows 7 Home Premium on my laptop, need to upgrade to Windows 8. If there were a Windows 8 Home Premium midway between those two I would've chosen that... but there are only two Windows 8 or Windows 8 Pro, so I'm a bit confused, as I don't want the former to be like Windows 7 Basic. My usage is mostly coding, game development, mid-performance gaming and some benchmarking and video editing. Your recommendations please?

    Read the article

  • mysqldump triggering repair of MySQL tables

    - by Rhodri
    I have an automated backup of a 6 Gigabyte MySQL database running very two hours. I also have a script which checks every minute for the need to repair MySQL tables. Increasingly I'm getting tables having to be repaired during the backup process with the message returned of: Auto-increment value: 0 is smaller than max used value: xx Is this being caused by corruption? Are the two scripts conflicting? Any ideas?

    Read the article

  • problem plotting on logscale in matplotlib in python

    - by user248237
    I am trying to plot the following numbers on a log scale as a scatter plot in matplotlib. Both the quantities on the x and y axes have very different scales, and one of the variables has a huge dynamic range (nearly 0 to 12 million roughly) while the other is between nearly 0 and 2. I think it might be good to plot both on a log scale. I tried the following, for a subset of the values of the two variables: fig = plt.figure(figsize(8, 8)) ax = fig.add_subplot(1, 1, 1) ax.set_yscale('log') ax.set_xscale('log') plt.scatter([1.341, 0.1034, 0.6076, 1.4278, 0.0374], [0.37, 0.12, 0.22, 0.4, 0.08]) The x-axes appear log scaled but the points do not appear -- only two points appear. Any idea how to fix this? Also, how can I make this log scale appear on a square axes, so that the correlation between the two variables can be interpreted from the scatter plot? thanks.

    Read the article

  • connect remotely to apache2 on ubuntu 10.04

    - by ronakin
    I've apache2 server installed on a machine that connected to two different networks, therefore it has two different addresses: 192.168.1.111 (static ip on ethernet network) and 109.253.78.211. when connecting through 109.253.78.211 on the browser, the web pages are displayed perfectly, However, when connecting through 109.253.78.211 the web pages are displayed partially. I've not installed any firewalls. I'll really appreciate if you could redirect me to checks I should commit to reach the source of the problem. Thank you :)

    Read the article

  • How to get items that are and are not in a list

    - by Chris
    I have an IEnumerable, listOfOnes, and an IEnumerable, listOfTwos. Assuming that I can compare objects of V against objects of T, I'd like to find which items are in listOfOnes but, not in listOfTwos. And vice versa. ex: var listOfOnes = new List<One> { new One { name = "chris", type = "user" }, new One { name = "foo", type = "group" }, new One { name = "john", type = "user" }, }; var listOfTwos = new[] { new Two { name = "chris", type = "user" }, new Two { name = "john", type = "user" }, new Two { name = "the Steves", type = "group" } }; var notInTwos; //= listOfOnes.FindDifferences(listOfTwos); //find all objects not in listOfTwos. Should find 'foo'. var notInOnes; //= listOfTwos.FindDifferences(listOfOnes) //find all objects not in listOfOnes. Should find 'the Steves'.

    Read the article

  • angular js scope property is undefined

    - by user2071301
    why is $scope.orderBy undefined? Shouldnt it be "test" ? http://jsfiddle.net/XB4QA/4/ var app = angular.module("Foo", []); app.directive("two", function () { return { scope: { orderBy: '@' }, restrict: 'E', transclude: true, controller: function ($scope, $element, $attrs) { console.log($scope.orderBy); // is undefined, why? }, template: '<div></div>', replace: true }; }); <div ng-app="Foo"> <two order-by="test">test</two> </div>

    Read the article

  • Copying data across tabs

    - by Guillermo
    Hello, I got two different forms in two different tabs. One has data from our system and the other one is an interface of another, external, system in wich we need to copy data into (XML or API integration not an option here) The this is that, having open both forms - in two different tabs - i need a greasemonkey script or something similar that allows my to copy data from one form to the other (using the getValue method in Javascript). The problem right now is that I cannot figure out how to reference with a greasemonkey script one particular tab or window (to rad data from or write data to). Do you think it would be possible to do what I'm thinking to do? THANKS

    Read the article

  • Cisco IPSec, nat, and port forwarding don't play well together

    - by Alan
    I have two Cisco ADSL modems configured conventionally to nat the inside traffic to the ISP. That works. I have two port forwards on one of them for SMTP and IMAP from the outside to the inside this provides external access to the mail server. This works. The modem doing the port forwarding also terminates PPTP VPN traffic. There are two DNS servers one inside the office which resolves mail to the local address, one outside the office which resolves mail for the rest of the world to the external interface. That all works. I recently added an IPSec VPN between the two modems and that works for every thing EXCEPT connections over the IPSec VPN to the mail server on port 25 or 143 from workstations on the remote lan. It would seem that the modem with the port forwards is confusing traffic from the mail server destined for a machine on the other side of the IPSec VPN for traffic that should go back to a port forward connection. PPTP VPN traffic to the mail server is fine. Is this a scenario anybody is familiar with and are there any suggestions on how to work around it? Many thanks Alan But wait there is more..... This is the strategic parts of the nat config. A route map is used to exclude the lans that are reachable via IPSec tunnels from being Nated. int ethernet0 ip nat inside int dialer1 ip nat outside ip nat inside source route-map nonat interface Dialer1 overload route-map nonat permit 10 match ip address 105 access-list 105 remark *** Traffic to NAT access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.9.0 0.0.0.255 access-list 105 deny ip 192.168.1.0 0.0.0.255 192.168.48.0 0.0.0.255 access-list 105 permit ip 192.168.1.0 0.0.0.255 any ip nat inside source static tcp 192.168.1.241 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.241 143 interface Dialer1 143 At the risk of answering my own question, I resolved this outside the Cisco realm. I bound a secondary ip address to mail server 192.168.1.244, changed the port forwards to use it while leaving all the local and IPSec traffic to use 192.168.1.241 and the problem was solved. New port forwards. ip nat inside source static tcp 192.168.1.244 25 interface Dialer1 25 ip nat inside source static tcp 192.168.1.244 143 interface Dialer1 143 Obviously this is a messy solution and being able to fix this in the Cisco would be preferable.

    Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >