Search Results

Search found 5633 results on 226 pages for 'follow'.

Page 192/226 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• NTFS Issues in Windows 7 and 2008 R2 - 'Is it a Bug?'

  - by renewieldraaijer

  I have been using the various versions of the Microsoft Windows product line since NT4 and I really thought I knew the ins and outs about the NTFS filesystem by now. There were always a few rules of thumb to understand what happens if you move data around. These rules were: "If you copy data, the copied data will inherit the permissions of the location it is being copied to. The same goes for moving data between disk partitions. Only when you move data within the same partition, the permissions are kept."  Recently I was asked to assist in troubleshooting some NTFS related issues. This forced me to have another good look at this theory. To my surprise I found out that this theory does not completely stand anymore. Apparently some things have changed since the release of Windows Vista / Windows 2008. Since the release of these Operating Systems, a move within the same disk partition results in the data inheriting the permissions of the location it is being copied into. A major change in the NTFS filesystem you would think!  Not quite! The above only counts when the move operation is being performed by using Windows Explorer. A move by using the 'move' command from within a cmd prompt for example, retains the NTFS permissions, just like before in Windows XP and older systems. Conclusion: The Windows Explorer is responsible for changing the ACL's of the moved data. This is a remarkable change, but if you follow this theory, the resulting ACL after a move operation is still predictable.  We could say that since Windows Vista and Windows 2008, a new rule set applies: "If you copy data, the copied data will inherit the permissions of the location it is being copied to. Same goes for moving data between disk partitions and within disk partitions. Only when you move data within the same partition by using something else than the Windows Explorer, the permissions are kept." The above behavior should be unchanged in Windows 7 / Windows 2008 R2, compared to Windows Vista / 2008. But somehow the NTFS permissions are not so predictable in Windows 7 and Windows 2008 R2. Moving data within the same disk partition the one time results in the permissions being kept and the next time results in inherited permissions from the destination location. I will try to demonstrate this in a few examples: Example 1 (Incorrect behavior): Consider two folders, 'Folder A' and 'Folder B' with the following permissions configured.                    Now we create the test file 'test file 1.txt' in 'Folder A' and afterwards move this file to 'Folder B' using Windows Explorer.                       According to the new theory, the file should inherit the permissions of 'Folder B' and therefore 'Group B' should appear in the ACL of 'test file 1.txt'. In the screenshot below the resulting permissions are displayed. The permissions from the originating location are kept, while the permissions of 'Folder B' should be inherited.                   Example 2 (Correct behavior): Again, consider the same two folders. This time we make a small modification to the ACL of 'Folder A'. We add 'Group C' to the ACL and again we create a file in 'Folder A' which we name 'test file 2.txt'.                    Next, we move 'test file 2.txt' to 'Folder B'.                       Again, we check the permissions of 'test file 2.txt' at the target location. We can now see that the permissions are inherited. This is what should be happening, and can be considered 'correct behavior' for Windows Vista / 2008 / 7 / 2008 R2. It remains uncertain why this behavior is so inconsistent. At this time, this is under investigation with Microsoft Support. The investigation has been going for the last two weeks and it is beginning to look like there is no rational reason for this, other than a bug in the Windows Explorer in Windows 7 and 2008 R2. As soon as there is any certainty on this, I will note it here in this blog.                   The examples above are harmless tests, by using my own laptop. If you would create the same set of folders and groups, and configure exactly the same permissions, you will see exactly the same behavior. Be sure to use Windows 7 or Windows 2008 R2.   Initially the problem arose at a customer site where move operations on data on the fileserver by users would result in unpredictable results. This resulted in the wrong set of people having àccess permissions on data that they should not have permissions to. Off course this is something we want to prevent at all costs.   I have also done several tests with move operations by using the move command in a cmd prompt. This way the behavior is always consistent. The inconsistent behavior is only exposed when using the Windows Explorer to initiate the move operation, and only when using Windows 7 or Windows 2008 R2 systems. It is evident that this behavior changes when the ACL of a folder has been changed, for example by adding an extra entry. The reason for this remains uncertain though. To be continued…. A dutch version of this post can be found at: http://blogs.platani.nl/?p=612

  Read the article

• HTML5 and Visual Studio 2010

  - by Harish Ranganathan

  All of us work with Visual Studio (or the free Visual Web Developer Express Edition) for developing web applications targeting ASP.NET / ASP.NET MVC or Silverlight etc.,  Over the years, Visual Studio has grown to a great extent.  From being a simple limited functionality tool in VS.NET 2002 to the multi-faceted, MEF driven Visual Studio 2010, it has come a long way.  And as much as Visual Studio supports rapid web development by generating HTML mark up, it also added intellisense for some of the HTML specifications that one has otherwise monotonously type every time.  Ex.- In Visual Studio 2010, one can just type the angular bracket “<” and then the first keyword “h” or “x” for html or xhtml respectively and then press tab twice and it would render the entire markup required for XHTML or HTML 1.0/1.1 strict/transitional and the fully qualified W3C URL. The same holds good for specifying HTML type declaration.  Now, the difference between HTML and XHTML has been discussed in detail already, though, if you are interested to know, you can read it from http://www.w3schools.com/xhtml/xhtml_html.asp But, the industry trend or the buzz around is HTML5.  With browsers like IE9 Beta, Google Chrome, Firefox 4 etc., supporting HTML5 standards big time, everyone wants to start developing HTML5 based websites. VS developers (like me) often get the question around when would VS start supporting HTML5.  VS 2010 was released last year and HTML5 is still specifications under development.  Clearly, with the timelines we started developing Visual Studio (way back in 2008), HTML5 specs were almost non-existent.  Even today, the HTML5 body recommends not to fully depend on the entire mark up set as they are still under development specs and might change in the future. However, with Visual Studio 2010 SP1 beta, there is quite a bit of support for HTML5 based web development.  In fact, one of my colleagues pointed out that SP1 beta’s major enhancement is its ability to support HTML5 tags and even add server mode to them. Lets look at the existing validation schema available in Visual Studio (Tools – Options – Validation) This is before installing Visual Studio 2010 SP1 Beta.  Clearly, the validation options are restricted to HTML 4.01 and XHTML 1.1 transitional and below. Also, lets consider using some of the new HTML5 input type elements.  (I found out this, just today from my friend, also an, ASP.NET team member) <input type=”email”> is one of the new input type elements according to the HTML5 specification.  Now, this works well if you type it as is  in Visual Studio and the page renders without any issue (since the default behaviour is, if there is an “undefined” type specified to input tag, it would fall back on the default mode, which is text. The moment you add <input type=”email” runat=”server” >, you get an error Naturally you don’t get intellisense support as well for these new tags.  Once you install Visual Studio 2010 Service Pack 1 Beta from here (it takes a while so you need to be patient for the installation to complete), you will start getting additional Validation templates for HTML5, as below:- Once you set this, you can start using HTML5 elements in your web page without getting errors/warnings.  Look at the screen shot below, for the new “video” tag which is showing up in intellisense (video is a part of the new HTML5 specifications)     note that, you still need to hook up the <!DOCTYPE html /> on the top manually as it doesn’t change automatically  (from the default XHTML 1.0 strict) when you create a new page. Also, the new input type tags in HTML5 are also supported One, can also use the <asp:TextBox type=”email” which would in turn generate the <input type=”email”> markup when the page is rendered.  In fact, as of SP1 beta, this is the only way to put the new input type tags with the runat=”server” attribute (otherwise you will get the parser error mentioned above.  This issue would be fixed by the final release of SP1 beta) Going further, there may be more support for having server tags for some of the common HTML5 elements, but this is work in progress currently. So, other than not having runat=”server” support for the new HTML5  input tags, you can pretty much build and target HTML5 websites with Visual Studio 2010 SP1 Beta, today.  For those who are running Visual Studio 2008, you also have the “HTML5 intellisense for Visual Studio 2010 and 2008” available for download, from http://visualstudiogallery.msdn.microsoft.com/d771cbc8-d60a-40b0-a1d8-f19fc393127d/ Note that, if you are running Visual Studio 2010, the recommended approach is to install the SP1 beta which would be the way forward for HTML5 support in Visual Studio. Of course, you need to test these on a browser supporting HTML5 such as IE9 Beta or Chrome or FireFox 4.  You can download IE9 Beta from here You can also follow the Visual Web Developer Team Blog for more updates on the stuff they are building. Cheers !!!

  Read the article

• Help Prevent Carpal Tunnel Problems with Workrave

  - by Matthew Guay

  Whether for work or leisure, many of us spend entirely too much time on the computer everyday.  This puts us at risk of having or aggravating Carpal Tunnel problems, but thanks to Workrave you can help to divert these problems. Workrave helps Carpal Tunnel problems by reminding you to get away from your computer periodically.  Breaking up your computer time with movement can help alleviate many computer and office related health problems.  Workrave helps by reminding you to take short pauses after several minutes of computer use, and longer breaks after continued use.  You can also use it to keep from using the computer for too much You time in a day.  Since you can change the settings to suit you, this can be a great way to make sure you’re getting the breaks you need. Install Workrave on Windows If you’re using Workrave on Windows, download (link below) and install it with the default settings. One installation setting you may wish to change is the startup.  By default Workrave will run automatically when you start your computer; if you don’t want this, you can simply uncheck the box and proceed with the installation. Once setup is finished, you can run Workrave directly from the installer. Or you can open it from your start menu by entering “workrave” in the search box. Install Workrave in Ubuntu If you wish to use it in Ubuntu, you can install it directly from the Ubuntu Software Center.  Click the Applications menu, and select Ubuntu Software Center. Enter “workrave” into the search box in the top right corner of the Software Center, and it will automatically find it.  Click the arrow to proceed to Workrave’s page. This will give you information about Workrave; simply click Install to install Workrave on your system. Enter your password when prompted. Workrave will automatically download and install.   When finished, you can find Workrave in your Applications menu under Universal Access. Using Workrave Workrave by default shows a small counter on your desktop, showing the length of time until your next Micro break (30 second break), Rest break (10 minute break), and max amount of computer usage for the day. When it’s time for a micro break, Workrave will popup a reminder on your desktop. If you continue working, it will disappear at the end of the timer.  If you stop, it will start a micro-break which will freeze most on-screen activities until the timer is over.  You can click Skip or Postpone if you do not want to take a break right then. After an hour of work, Workrave will give you a 10 minute rest break.  During this it will show you some exercises that can help eliminate eyestrain, muscle tension, and other problems from prolonged computer usage.  You can click through the exercises, or can skip or postpone the break if you wish.   Preferences You can change your Workrave preferences by right-clicking on its icon in your system tray and selecting Preferences. Here you can customize the time between your breaks, and the length of your breaks.  You can also change your daily computer usage limit, and can even turn off the postpone and skip buttons on notifications if you want to make sure you follow Workrave and take your rests! From the context menu, you can also choose Statistics.  This gives you an overview of how many breaks, prompts, and more were shown on a given day.  It also shows a total Overdue time, which is the total length of the breaks you skipped or postponed.  You can view your Workrave history as well by simply selecting a date on the calendar.   Additionally, the Activity tab in the Statics pane shows more info about your computer usage, including total mouse movement, mouse button clicks, and keystrokes. Conclusion Whether you’re suffering with Carpal Tunnel or trying to prevent it, Workrave is a great solution to help remind you to get away from your computer periodically and rest.  Of course, since you can simply postpone or skip the prompts, you’ve still got to make an effort to help your own health.  But it does give you a great way to remind yourself to get away from the computer, and especially for geeks, this may be something that we really need! Download Workrave Similar Articles Productive Geek Tips Switch to the Dvorak Keyboard Layout in XPAccess Your MySQL Server Remotely Over SSHHow to Secure Gaim Instant Messenger traffic at Work with SecureCRT and SSHConnect to VMware Server Console Over SSHDisclaimers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional StockFox puts a Lightweight Stock Ticker in your Statusbar Explore Google Public Data Visually The Ultimate Excel Cheatsheet Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader

  Read the article

• 2d tank movement and turret solution

  - by Phil

  Hi! I'm making a simple top-down tank game on the ipad where the user controls the movement of the tank with the left "joystick" and the rotation of the turret with the right one. I've spent several hours just trying to get it to work decently but now I turn to the pros :) I have two referencial objects, one for the movement and one for the rotation. The referencial objects always stay max two units away from the tank and I use them to tell the tank in what direction to move. I chose this approach to decouple movement and rotational behaviour from the raw input of the joysticks, I believe this will make it simpler to implement whatever behaviour I want for the tank. My problem is 1; the turret rotates the long way to the target. With this I mean that the target can be -5 degrees away in rotation and still it rotates 355 degrees instead of -5 degrees. I can't figure out why. The other problem is with the movement. It just doesn't feel right to have the tank turn while moving. I'd like to have a solution that would work as well for the AI as for the player. A blackbox function for the movement where the player only specifies in what direction it should move and it moves there under the constraints that are imposed on it. I am using the standard joystick class found in the Unity iPhone package. This is the code I'm using for the movement: public class TankFollow : MonoBehaviour { //Check angle difference and turn accordingly public GameObject followPoint; public float speed; public float turningSpeed; void Update() { transform.position = Vector3.Slerp(transform.position, followPoint.transform.position, speed * Time.deltaTime); //Calculate angle var forwardA = transform.forward; var forwardB = (followPoint.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff > 5) { //Rotate to transform.Rotate(new Vector3(0, (-turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff < 5) { transform.Rotate(new Vector3(0, (turningSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else { } transform.position = new Vector3(transform.position.x, 0, transform.position.z); } } And this is the code I'm using to rotate the turret: void LookAt() { var forwardA = -transform.right; var forwardB = (toLookAt.transform.position - transform.position); var angleA = Mathf.Atan2(forwardA.x, forwardA.z) * Mathf.Rad2Deg; var angleB = Mathf.Atan2(forwardB.x, forwardB.z) * Mathf.Rad2Deg; var angleDiff = Mathf.DeltaAngle(angleA, angleB); //print(angleDiff.ToString()); if (angleDiff - 180 > 1) { //Rotate to transform.Rotate(new Vector3(0, (turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); } else if (angleDiff - 180 < -1) { transform.Rotate(new Vector3(0, (-turretSpeed * Time.deltaTime),0)); //transform.rotation = new Quaternion(transform.rotation.x, transform.rotation.y + adjustment, transform.rotation.z, transform.rotation.w); print((angleDiff - 180).ToString()); } else { } } Since I want the turret reference point to turn in relation to the tank (when you rotate the body, the turret should follow and not stay locked on since it makes it impossible to control when you've got two thumbs to work with), I've made the TurretFollowPoint a child of the Turret object, which in turn is a child of the body. I'm thinking that I'm making it too difficult for myself with the reference points but I'm imagining that it's a good idea. Please be honest about this point. So I'll be grateful for any help I can get! I'm using Unity3d iPhone. Thanks!

  Read the article

• Installing Catalyst 11.6 for an ATI HD 6970

  - by David Oliver

  Ubuntu Maverick 10.10 is displaying the desktop okay (though limited to 1600x1200) after my having installed my new HD 6970 card, so I'm now trying to install the proprietary driver (I understand the open source one requires a more recent kernel than that in Maverick). The proprietary driver under 'Additional Drivers' resulted in a black screen on boot, so I deactivated and am trying to follow the manual install instructions at the cchtml Ubuntu Maverick Installation Guide. When I try to create the .deb packages with: sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick I get: david@skipper:~/catalyst11.6$ sh ati-driver-installer-11-6-x86.x86_64.run --buildpkg Ubuntu/maverick Created directory fglrx-install.oLN3ux Verifying archive integrity... All good. Uncompressing ATI Catalyst(TM) Proprietary Driver-8.861......................... ===================================================================== ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager ===================================================================== Generating package: Ubuntu/maverick Package build failed! Package build utility output: ./packages/Ubuntu/ati-packager.sh: 396: debclean: not found dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.64Vzxk dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.QEmIld dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . Can't exec "debian/rules": Permission denied at /usr/bin/debuild line 1314. debuild: fatal error at line 1313: couldn't exec debian/rules: Permission denied dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.xtY6vC dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Cleaning in directory . /usr/bin/fakeroot: line 176: debian/rules: Permission denied debuild: fatal error at line 1319: couldn't exec fakeroot debian/rules: dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions dpkg-buildpackage: source package fglrx-installer dpkg-buildpackage: source version 2:8.861-0ubuntu1 dpkg-buildpackage: source changed by ATI Technologies Inc. <http://ati.amd.com/support/driver.html> dpkg-source --before-build fglrx.oYWICI dpkg-buildpackage: host architecture amd64 debian/rules build Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507. dpkg-buildpackage: error: debian/rules build failed with unknown exit code -1 Removing temporary directory: fglrx-install.oLN3ux I've installed devscripts which has debclean in it. I've tried running the command with and without sudo. I'm not experienced with installing from downloads/source, but it seems like the file debian/source isn't being set to be executable when it needs to be. If I extract only, without using the package builder command, debian/rules is 744. As to what to do next, I'm stumped. Many thanks.

  Read the article

• Trash Destination Adapter

  The Trash Destination and this article came from early experiences of using SSIS and community feedback at the time. When developing a package it is very useful to have a destination adapter that does nothing but consume rows with no setup requirement. You often want run a package part way through development, or just add a path so you can set a Data Viewer. There are stock tasks that can be used, but with the Trash Destination all columns are treated as selected automatically (usage type of read-only), so the pipeline knows they are required. It is also obvious that this is for development or diagnostic purposes, and is clearly not a part of the functional design of the package. It is also ideal for just playing around and exploring concepts in SSIS, and is often used in conjunction with the Data Generator Source. Using these two components it is easy to setup a test of an expression in the Derived Column Transformation for example. The Data Generator Source provides some dummy data, and the Trash Destination allows you to anchor the output path and set a Data Viewer to examine the results. It can also be used when performance tuning packages. It is a consistent and known quantity that has no external influences, so it is ideal as a destination when breaking the data flow into sections to isolate a bottleneck. The adapter is really simple to use and requires no setup. Simply drop it onto the pipeline designer and use it to terminate your data flow path. Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally, for 2005/2008, you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trash Destination transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Downloads The Trash Destination is available for SQL Server 2005, SQL Server 2008 (includes R2) and SQL Server 2012. Please choose the version to match your SQL Server version, or you can install multiple versions and use them side by side if you have more than one version of SQL Server installed. Trash Destination for SQL Server 2005 Trash Destination for SQL Server 2008 Trash Destination for SQL Server 2012 Version History SQL Server 2012 Version 3.0.0.34 - SQL Server 2012 release. Includes upgrade support for both 2005 and 2008 packages to 2012. (5 Jun 2012) SQL Server 2008 Version 2.0.0.33 - SQL Server 2008 release. Includes support for upgrade of 2005 packages. RTM compatible, previously February 2008 CTP. (4 Mar 2008) Version 2.0.0.31 - SQL Server 2008 November 2007 CTP. (14 Feb 2008) SQL Server 2005 Version 1.0.2.18 - SQL Server 2005 RTM Refresh. SP1 Compatibility Testing. (12 Jun 2006) Version 1.0.1.1 - SQL Server 2005 IDW 15 June CTP. Minor enhancements over v1.0.1.0. (11 Jun 2005) Version 1.0.1.0 - SQL Server 2005 IDW 14 April CTP. First Public Release. (30 May 2005) Troubleshooting Make sure you have downloaded the version that matches your version of SQL Server. We offer separate downloads for SQL Server 2005, SQL Server 2008 and SQL Server 2012. If you an error when you try and use the component along the lines of The component could not be added to the Data Flow task. Please verify that this component is properly installed.  ... The data flow object "Konesans ..." is not installed correctly on this computer, this usually indicates that the internal cache of SSIS components needs to be updated. This is held by the SSIS service, so you need restart the the SQL Server Integration Services service. You can do this from the Services applet in Control Panel or Administrative Tools in Windows. You can also restart the computer if you prefer. You may also need to restart any current instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. The full error message is shown below for reference: TITLE: Microsoft Visual Studio ------------------------------ The component could not be added to the Data Flow task. Please verify that this component is properly installed. ------------------------------ ADDITIONAL INFORMATION: The data flow object "Konesans.Dts.Pipeline.TrashDestination.Trash, Konesans.Dts.Pipeline.TrashDestination, Version=1.0.1.0, Culture=neutral, PublicKeyToken=b8351fe7752642cc" is not installed correctly on this computer. (Microsoft.DataTransformationServices.Design) For 2005/2008, once installation is complete you need to manually add the task to the toolbox before you will see it and to be able add it to packages - How do I install a task or transform component? This is not necessary for SQL Server 2012 as the new SSIS toolbox automatically detects components. If you are still having issues then contact us, but please provide as much detail as possible about error, as well as which version of the the task you are using and details of the SSIS tools installed.

  Read the article

• User Experience Fundamentals

  - by ultan o'broin

  Understanding what user experience means in the modern work environment is central to building great-looking usable applications on the desktop or mobile devices. What better place to start a series of blog posts on such Applications User Experience team enablement for customers and partners than by sharing what the term really means, writes team member Karen Scipi. Applications UX have gained valuable insights into developing a user experience that reflects the experience of today’s worker. We have observed real workers performing real tasks in real work environments, and we have developed a set of new standards of application design that have been scientifically proven to be beneficial to enable today’s workers. We share such expertise to enable our customers and partners to benefit from our insights and to further their return on investment when building Oracle applications. So, What is User Experience? ?The user interface (UI) is about the on-screen user context provided by the layout of widgets (such as icons, fields, and buttons and more) and the visual impact of colors, typographic choices, and so on. The UI comprises the “look and feel” of the application that users interact with, and reflects, in essence, the most immediate aspects of usability we can now all relate to.  User experience, on the other hand, is about understanding the whole context of the world of work, how workers go about completing tasks, crossing all sorts of boundaries along the way. It is a study of how business processes and workers goals coincide, how users work with technology or other tools to get their jobs done, their interactions with other users, and their response to the technical, physical, and cultural environment around them. User experience is all about how users work—their work environments, office layouts, desk tools, types of devices, their working day, and more. Even their job aids, such as sticky notes, offer insight for UX innovation. User experience matters because businesses needs to be efficient, work must be productive, and users now demand to be satisfied by the applications they work with. In simple terms, tasks finished quickly and accurately for a business evokes organization and worker satisfaction, which in turn makes workers feel good and more than willing to use the application again tomorrow. Design Principles for the Enterprise Worker The consumerization of information technology has raised the bar for enterprise applications. Applications must be consistent, simple, intuitive, but above all contextual, reflecting how and when workers work, in the office or on the go. For example, the Google search experience with its type-ahead keyword-prompting feature is how workers expect to be able to discover enterprise information, too. Type-ahead in PeopleSoft 9.1 To build software that enables workers to be productive, our design principles meet modern work requirements about consistency, with well-organized, context-driven information, geared for a working world of discovery and collaboration. Our applications must also behave in a simple, web-like way just like Amazon, Google, and Apple products that workers use at home or on the go. Our user experience must also reflect workers’ needs for flexibility and well-loved enterprise practices such as using popular desktop tools like Microsoft Excel or Outlook as required. Building User Experience Productively The building blocks of Oracle Fusion Applications are the user experience design patterns. Based on the Oracle Fusion Middleware technology used to build Oracle Fusion Applications, the patterns are reusable solutions to common usability challenges that ADF developers typically face as they build applications, extensions, and integrations. Developers use the patterns as part of their Oracle toolkits to realize great usability consistently and in a productive way. Our design pattern creation process is informed by user experience research and science, an understanding of our technology’s capabilities, the demands for simplification and intuitiveness from users, and the best of Oracle’s acquisitions strategy (an injection of smart people and smart innovation). The patterns are supported by usage guidelines and are tested in our labs and assembled into a library of proven resources we used to build own Oracle Fusion Applications and other Oracle applications user experiences. The design patterns library is now available to the ADF community and to our partners and customers, for free. Developers with ADF skills and other technology skills can now offer more than just coding and functionality and still use the best in enterprise methodologies to ensure that a great user experience is easily applied, scaled, and maintained, whether it be for SaaS or on-premise deployments for Oracle Fusion Applications, for applications coexistence, or for partner integrations scenarios.  Oracle partners and customers already using our design patterns to build solutions and win business in smart and productive ways are now sharing their experiences and insights on pattern use to benefit your entire business. Applications UX is going global with the message and the means. Our hands-on user experience enablement through ADF  is expanding. So, stay tuned to Misha Vaughan's Voice of User Experience (VOX) blog and follow along on Twitter at @usableapps for news of outreach events and other learning opportunities. Interested in Learning More? Oracle Fusion Applications User Experience Patterns and Guidelines Library Shout-outs for Oracle UX Design Patterns Oracle Fusion Applications User Experience Design Patterns: Productivity Realized

  Read the article

• Create a Social Community of Trust Along With Your Federal Digital Services Governance

  - by TedMcLaughlan

  The Digital Services Governance Recommendations were recently released, supporting the US Federal Government's Digital Government Strategy Milestone Action #4.2 to establish agency-wide governance structures for developing and delivering digital services. Figure 1 - From: "Digital Services Governance Recommendations" While extremely important from a policy and procedure perspective within an Agency's information management and communications enterprise, these recommendations only very lightly reference perhaps the most important success enabler - the "Trusted Community" required for ultimate usefulness of the services delivered. By "ultimate usefulness", I mean the collection of public, transparent properties around government information and digital services that include social trust and validation, social reach, expert respect, and comparative, standard measures of relative value. In other words, do the digital services meet expectations of the public, social media ecosystem (people AND machines)? A rigid governance framework, controlling by rules, policies and roles the creation and dissemination of digital services may meet the expectations of direct end-users and most stakeholders - including the agency information stewards and security officers. All others who may share comments about the services, write about them, swap or review extracts, repackage, visualize or otherwise repurpose the output for use in entirely unanticipated, social ways - these "stakeholders" will not be governed, but may observe guidance generated by a "Trusted Community". As recognized members of the trusted community, these stakeholders may ultimately define the right scope and detail of governance that all other users might observe, promoting and refining the usefulness of the government product as the social ecosystem expects. So, as part of an agency-centric governance framework, it's advised that a flexible governance model be created for stewarding a "Community of Trust" around the digital services. The first steps follow the approach outlined in the Recommendations: Step 1: Gather a Core Team In addition to the roles and responsibilities described, perhaps a set of characteristics and responsibilities can be developed for the "Trusted Community Steward/Advocate" - i.e. a person or team who (a) are entirely cognizant of and respected within the external social media communities, and (b) are trusted both within the agency and outside as practical, responsible, non-partisan communicators of useful information. The may seem like a standard Agency PR/Outreach team role - but often an agency or stakeholder subject matter expert with a public, active social persona works even better. Step 2: Assess What You Have In addition to existing, agency or stakeholder decision-making bodies and assets, it's important to take a PR/Marketing view of the social ecosystem. How visible are the services across the social channels utilized by current or desired constituents of your agency? What's the online reputation of your agency and perhaps the service(s)? Is Search Engine Optimization (SEO) a facet of external communications/publishing lifecycles? Who are the public champions, instigators, value-adders for the digital services, or perhaps just influential "communicators" (i.e. with no stake in the game)? You're essentially assessing your market and social presence, and identifying the actors (including your own agency employees) in the existing community of trust. Step 3: Determine What You Want The evolving Community of Trust will most readily absorb, support and provide feedback regarding "Core Principles" (Element B of the "six essential elements of a digital services governance structure") shared by your Agency, and obviously play a large, though probably very unstructured part in Element D "Stakeholder Input and Participation". Plan for this, and seek input from the social media community with respect to performance metrics - these should be geared around the outcome and growth of the trusted communities actions. How big and active is this community? What's the influential reach of this community with respect to particular messaging or campaigns generated by the Agency? What's the referral rate TO your digital services, FROM channels owned or operated by members of this community? (this requires governance with respect to content generation inclusive of "markers" or "tags"). At this point, while your Agency proceeds with steps 4 ("Build/Validate the Governance Structure") and 5 ("Share, Review, Upgrade"), the Community of Trust might as well just get going, and start adding value and usefulness to the existing conversations, existing data services - loosely though directionally-stewarded by your trusted advocate(s). Why is this an "Enterprise Architecture" topic? Because it's increasingly apparent that a Public Service "Enterprise" is not wholly contained within Agency facilities, firewalls and job titles - it's also manifested in actual, perceived or representative forms outside the walls, on the social Internet. An Agency's EA model and resulting investments both facilitate and are impacted by the "Social Enterprise". At Oracle, we're very active both within our Enterprise and outside, helping foster social architectures that enable truly useful public services, digital or otherwise.

  Read the article

• Towards an F# .NET Reflector add-in

  - by CliveT

  When I had the opportunity to spent some time during Red Gate's recent "down tools" week on a project of my choice, the obvious project was an F# add-in for Reflector . To be honest, this was a bit of a misnomer as the amount of time in the designated week for coding was really less than three days, so it was always unlikely that very much progress would be made in such a small amount of time (and that certainly proved to be the case), but I did learn some things from the experiment. Like lots of problems, one useful technique is to take examples, get them to work, and then generalise to get something that works across the board. Unfortunately, I didn't have enough time to do the last stage. The obvious first step is to take a few function definitions, starting with the obvious hello world, moving on to a non-recursive function and finishing with the ubiquitous recursive Fibonacci function. let rec printMessage message  =     printfn  message let foo x  =    (x + 1) let rec fib x  =     if (x >= 2) then (fib (x - 1) + fib (x - 2)) else 1 The major problem in decompiling these simple functions is that Reflector has an in-memory object model that is designed to support object-oriented languages. In particular it has a return statement that allows function bodies to finish early. I used some of the in-built functionality to take the IL and produce an in-memory object model for the language, but then needed to write a transformer to push the return statements to the top of the tree to make it easy to render the code into a functional language. This tree transform works in some scenarios, but not in others where we simply regenerate code that looks more like CPS style. The next thing to get working was library level bindings of values where these values are calculated at runtime. let x = [1 ; 2 ; 3 ; 4] let y = List.map  (fun x -> foo x) x The way that this is translated into a set of classes for the underlying platform means that the code needs to follow references around, from the property exposing the calculated value to the class in which the code for generating the value is embedded. One of the strongest selling points of functional languages is the algebraic datatypes, which allow definitions via standard mathematical-style inductive definitions across the union cases. type Foo =     | Something of int     | Nothing type 'a Foo2 =     | Something2 of 'a     | Nothing2 Such a definition is compiled into a number of classes for the cases of the union, which all inherit from a class representing the type itself. It wasn't too hard to get such a de-compilation happening in the cases I tried. What did I learn from this? Firstly, that there are various bits of functionality inside Reflector that it would be useful for us to allow add-in writers to access. In particular, there are various implementations of the Visitor pattern which implement algorithms such as calculating the number of references for particular variables, and which perform various substitutions which could be more generally useful to add-in writers. I hope to do something about this at some point in the future. Secondly, when you transform a functional language into something that runs on top of an object-based platform, you lose some fidelity in the representation. The F# compiler leaves attributes in place so that tools can tell which classes represent classes from the source program and which are there for purposes of the implementation, allowing the decompiler to regenerate these constructs again. However, decompilation technology is a long way from being able to take unannotated IL and transform it into a program in a different language. For a simple function definition, like Fibonacci, I could write a simple static function and have it come out in F# as the same function, but it would be practically impossible to take a mass of class definitions and have a decompiler translate it automatically into an F# algebraic data type. What have we got out of this? Some data on the feasibility of implementing an F# decompiler inside Reflector, though it's hard at the moment to say how long this would take to do. The work we did is included the 6.5 EAP for Reflector that you can get from the EAP forum. All things considered though, it was a useful way to gain more familiarity with the process of writing an add-in and understand difficulties other add-in authors might experience. If you'd like to check out a video of Down Tools Week, click here.

  Read the article

• Getting to grips with the stack in nasm

  - by MarkPearl

  Today I spent a good part of my day getting to grips with the stack and nasm. After looking at my notes on nasm I think this is one area for the course I am doing they could focus more on… So here are some snippets I have put together that have helped me understand a little bit about the stack… Simplest example of the stack You will probably see examples like the following in circulation… these demonstrate the simplest use of the stack… org 0x100 bits 16 jmp main main: push 42h push 43h push 44h mov ah,2h ;set to display characters pop dx    ;get the first value int 21h   ;and display it pop dx    ;get 2nd value int 21h   ;and display it pop dx    ;get 3rd value int 21h   ;and display it int 20h The output from above code would be… DCB Decoupling code using “call” and “ret” This is great, but it oversimplifies what I want to use the stack for… I do not know if this goes against the grain of assembly programmers or not, but I want to write loosely coupled assembly code – and I want to use the stack as a mechanism for passing values into my decoupled code. In nasm we have the call and return instructions, which provides a mechanism for decoupling code, for example the following could be done… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov ah,2h mov dx,41h int 21h ret ;---------------------------------------- main: call displayChar int 20h   This would output the following to the console A So, it would seem that call and ret allow us to jump to segments of our code and then return back to the calling position – a form of segmenting the code into what we would called in higher order languages “functions” or “methods”. The only issue is, in higher order languages there is a way to pass parameters into the functions and return results. Because of the primitive nature of the call and ret instructions, this does not seem to be obvious. We could of course use the registers to pass values into the subroutine and set values coming out, but the problem with this is we… Have a limited number of registers Are threading our code with tight coupling (it would be hard to migrate methods outside of their intended use in a particular program to another one) With that in mind, I turn to the stack to provide a loosely coupled way of calling subroutines… First attempt with the Stack Initially I thought this would be simple… we could use code that looks as follows to achieve what I want… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov ah,2h pop dx int 21h ret ;---------------------------------------- main: push 41h call displayChar int 20h   However running this application does not give the desired result, I want an ‘A’ to be returned, and I am getting something totally different (you will to). Reading up on the call and ret instructions a discovery is made… they are pushing and popping things onto and off the stack as well… When the call instruction is executed, the current value of IP (the address of the instruction to follow) is pushed onto the stack, when ret is called, the last value on the stack is popped off into the IP register. In effect what the above code is doing is as follows with the stack… push 41h push current value of ip pop current value of ip to dx pop 41h to ip This is not what I want, I need to access the 41h that I pushed onto the stack, but the call value (which is necessary) is putting something in my way. So, what to do? Remember we have other registers we can use as well as a thing called indirect addressing… So, after some reading around, I came up with the following approach using indirect addressing… org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov bp,sp mov ah,2h mov dx,[bp+2] int 21h ret ;---------------------------------------- main: push 41h call displayChar int 20h In essence, what I have done here is used a trick with the stack pointer… it goes as follows… Push 41 onto the stack Make the call to the function, which will push the IP register onto the stack and then jump to the displayChar label Move the value in the stack point to the bp register (sp currently points at IP register) Move the at the location of bp minus 2 bytes to dx (this is now the value 41h) display it, execute the ret instruction, which pops the ip value off the stack and goes back to the calling point This approach is still very raw, some further reading around shows that I should be pushing the value of bp onto the stack before replacing it with sp, but it is the starting thread to getting loosely coupled subroutines. Let’s see if you get what the following output would be? org 0x100 bits 16 jmp main ;---------------------------------------- displayChar: mov bp,sp mov ah,2h mov dx,[bp+4] int 21h mov dx,[bp+2] int 21h ret ;---------------------------------------- main: push 41h push 42h call displayChar int 20h The output is… AB Where to from here? If by any luck some assembly programmer comes along and see this code and notices that I have made some fundamental flaw in my logic… I would like to know, so please leave a comment… appreciate any feedback!

  Read the article

• Big Data – Various Learning Resources – How to Start with Big Data? – Day 20 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned how to become a Data Scientist for Big Data. In this article we will go over various learning resources related to Big Data. In this series we have covered many of the most essential details about Big Data. At the beginning of this series, I have encouraged readers to send me questions. One of the most popular questions is - “I want to learn more about Big Data. Where can I learn it?” This is indeed a great question as there are plenty of resources out to learn about Big Data and it is indeed difficult to select on one resource to learn Big Data. Hence I decided to write here a few of the very important resources which are related to Big Data. Learn from Pluralsight Pluralsight is a global leader in high-quality online training for hardcore developers.  It has fantastic Big Data Courses and I started to learn about Big Data with the help of Pluralsight. Here are few of the courses which are directly related to Big Data. Big Data: The Big Picture Big Data Analytics with Tableau NoSQL: The Big Picture Understanding NoSQL Data Analysis Fundamentals with Tableau I encourage all of you start with this video course as they are fantastic fundamentals to learn Big Data. Learn from Apache Resources at Apache are single point the most authentic learning resources. If you want to learn fundamentals and go deep about every aspect of the Big Data, I believe you must understand various concepts in Apache’s library. I am pretty impressed with the documentation and I am personally referencing it every single day when I work with Big Data. I strongly encourage all of you to bookmark following all the links for authentic big data learning. Haddop - The Apache Hadoop® project develops open-source software for reliable, scalable, distributed computing. Ambari: A web-based tool for provisioning, managing, and monitoring Apache Hadoop clusters which include support for Hadoop HDFS, Hadoop MapReduce, Hive, HCatalog, HBase, ZooKeeper, Oozie, Pig and Sqoop. Ambari also provides a dashboard for viewing cluster health such as heat maps and ability to view MapReduce, Pig and Hive applications visually along with features to diagnose their performance characteristics in a user-friendly manner. Avro: A data serialization system. Cassandra: A scalable multi-master database with no single points of failure. Chukwa: A data collection system for managing large distributed systems. HBase: A scalable, distributed database that supports structured data storage for large tables. Hive: A data warehouse infrastructure that provides data summarization and ad hoc querying. Mahout: A Scalable machine learning and data mining library. Pig: A high-level data-flow language and execution framework for parallel computation. ZooKeeper: A high-performance coordination service for distributed applications. Learn from Vendors One of the biggest issues with about learning Big Data is setting up the environment. Every Big Data vendor has different environment request and there are lots of things require to set up Big Data framework. Many of the users do not start with Big Data as they are afraid about the resources required to set up framework as well as a time commitment. Here Hortonworks have created fantastic learning environment. They have created Sandbox with everything one person needs to learn Big Data and also have provided excellent tutoring along with it. Sandbox comes with a dozen hands-on tutorial that will guide you through the basics of Hadoop as well it contains the Hortonworks Data Platform. I think Hortonworks did a fantastic job building this Sandbox and Tutorial. Though there are plenty of different Big Data Vendors I have decided to list only Hortonworks due to their unique setup. Please leave a comment if there are any other such platform to learn Big Data. I will include them over here as well. Learn from Books There are indeed few good books out there which one can refer to learn Big Data. Here are few good books which I have read. I will update the list as I will learn more. Ethics of Big Data Balancing Risk and Innovation Big Data for Dummies Head First Data Analysis: A Learner’s Guide to Big Numbers, Statistics, and Good Decisions If you search on Amazon there are millions of the books but I think above three books are a great set of books and it will give you great ideas about Big Data. Once you go through above books, you will have a clear idea about what is the next step you should follow in this series. You will be capable enough to make the right decision for yourself. Tomorrow In tomorrow’s blog post we will wrap up this series of Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Allowing Access to HttpContext in WCF REST Services

  - by Rick Strahl

  If you’re building WCF REST Services you may find that WCF’s OperationContext, which provides some amount of access to Http headers on inbound and outbound messages, is pretty limited in that it doesn’t provide access to everything and sometimes in a not so convenient manner. For example accessing query string parameters explicitly is pretty painful: [OperationContract] [WebGet] public string HelloWorld() { var properties = OperationContext.Current.IncomingMessageProperties; var property = properties[HttpRequestMessageProperty.Name] as HttpRequestMessageProperty; string queryString = property.QueryString; var name = StringUtils.GetUrlEncodedKey(queryString,"Name"); return "Hello World " + name; } And that doesn’t account for the logic in GetUrlEncodedKey to retrieve the querystring value. It’s a heck of a lot easier to just do this: [OperationContract] [WebGet] public string HelloWorld() { var name = HttpContext.Current.Request.QueryString["Name"] ?? string.Empty; return "Hello World " + name; } Ok, so if you follow the REST guidelines for WCF REST you shouldn’t have to rely on reading query string parameters manually but instead rely on routing logic, but you know what: WCF REST is a PITA anyway and anything to make things a little easier is welcome. To enable the second scenario there are a couple of steps that you have to take on your service implementation and the configuration file. Add aspNetCompatibiltyEnabled in web.config Fist you need to configure the hosting environment to support ASP.NET when running WCF Service requests. This ensures that the ASP.NET pipeline is fired up and configured for every incoming request. <system.serviceModel>     <serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" /> </system.serviceModel> Markup your Service Implementation with AspNetCompatibilityRequirements Attribute Next you have to mark up the Service Implementation – not the contract if you’re using a separate interface!!! – with the AspNetCompatibilityRequirements attribute: [ServiceContract(Namespace = "RateTestService")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class RestRateTestProxyService Typically you’ll want to use Allowed as the preferred option. The other options are NotAllowed and Required. Allowed will let the service run if the web.config attribute is not set. Required has to have it set. All these settings determine whether an ASP.NET host AppDomain is used for requests. Once Allowed or Required has been set on the implemented class you can make use of the ASP.NET HttpContext object. When I allow for ASP.NET compatibility in my WCF services I typically add a property that exposes the Context and Request objects a little more conveniently: public HttpContext Context { get { return HttpContext.Current; } } public HttpRequest Request { get { return HttpContext.Current.Request; } } While you can also access the Response object and write raw data to it and manipulate headers THAT is probably not such a good idea as both your code and WCF will end up writing into the output stream. However it might be useful in some situations where you need to take over output generation completely and return something completely custom. Remember though that WCF REST DOES actually support that as well with Stream responses that essentially allow you to return any kind of data to the client so using Response should really never be necessary. Should you or shouldn’t you? WCF purists will tell you never to muck with the platform specific features or the underlying protocol, and if you can avoid it you definitely should avoid it. Querystring management in particular can be handled largely with Url Routing, but there are exceptions of course. Try to use what WCF natively provides – if possible as it makes the code more portable. For example, if you do enable ASP.NET Compatibility you won’t be able to self host a WCF REST service. At the same time realize that especially in WCF REST there are number of big holes or access to some features are a royal pain and so it’s not unreasonable to access the HttpContext directly especially if it’s only for read-only access. Since everything in REST works of URLS and the HTTP protocol more control and easier access to HTTP features is a key requirement to building flexible services. It looks like vNext of the WCF REST stuff will feature many improvements along these lines with much deeper native HTTP support that is often so useful in REST applications along with much more extensibility that allows for customization of the inputs and outputs as data goes through the request pipeline. I’m looking forward to this stuff as WCF REST as it exists today still is a royal pain (in fact I’m struggling with a mysterious version conflict/crashing error on my machine that I have not been able to resolve – grrrr…).© Rick Strahl, West Wind Technologies, 2005-2011Posted in ASP.NET  AJAX  WCF  

  Read the article

• Puppet: Making Windows Awesome Since 2011

  - by Robz / Fervent Coder

  Originally posted on: http://geekswithblogs.net/robz/archive/2014/08/07/puppet-making-windows-awesome-since-2011.aspxPuppet was one of the first configuration management (CM) tools to support Windows, way back in 2011. It has the heaviest investment on Windows infrastructure with 1/3 of the platform client development staff being Windows folks.  It appears that Microsoft believed an end state configuration tool like Puppet was the way forward, so much so that they cloned Puppet’s DSL (domain-specific language) in many ways and are calling it PowerShell DSC. Puppet Labs is pushing the envelope on Windows. Here are several things to note: Puppet x64 Ruby support for Windows coming in v3.7.0. An awesome ACL module (with order, SIDs and very granular control of permissions it is best of any CM). A wealth of modules that work with Windows on the Forge (and more on GitHub). Documentation solely for Windows folks - https://docs.puppetlabs.com/windows. Some of the common learning points with Puppet on Windows user are noted in this recent blog post. Microsoft OpenTech supports Puppet. Azure has the ability to deploy a Puppet Master (http://puppetlabs.com/solutions/microsoft). At Microsoft //Build 2014 in the Day 2 Keynote Puppet Labs CEO Luke Kanies co-presented with Mark Russonivich (http://channel9.msdn.com/Events/Build/2014/KEY02  fast forward to 19:30)! Puppet has a Visual Studio Plugin! It can be overwhelming learning a new tool like Puppet at first, but Puppet Labs has some resources to help you on that path. Take a look at the Learning VM, which has a quest-based learning tool. For real-time questions, feel free to drop onto #puppet on freenode.net (yes, some folks still use IRC) with questions, and #puppet-dev with thoughts/feedback on the language itself. You can subscribe to puppet-users / puppet-dev mailing lists. There is also ask.puppetlabs.com for questions and Server Fault if you want to go to a Stack Exchange site. There are books written on learning Puppet. There are even Puppet User Groups (PUGs) and other community resources! Puppet does take some time to learn, but with anything you need to learn, you need to weigh the benefits versus the ramp up time. I learned NHibernate once, it had a very high ramp time back then but was the only game on the street. Puppet’s ramp up time is considerably less than that. The advantage is that you are learning a DSL, and it can apply to multiple platforms (Linux, Windows, OS X, etc.) with the same Puppet resource constructs. As you learn Puppet you may wonder why it has a DSL instead of just leveraging the language of Ruby (or maybe this is one of those things that keeps you up wondering at night). I like the DSL over a small layer on top of Ruby. It allows the Puppet language to be portable and go more places. It makes you think about the end state of what you want to achieve in a declarative sense instead of in an imperative sense. You may also find that right now Puppet doesn’t run manifests (scripts) in order of the way resources are specified. This is the number one learning point for most folks. As a long time consternation of some folks about Puppet, manifest ordering was not possible in the past. In fact it might be why some other CMs exist! As of 3.3.0, Puppet can do manifest ordering, and it will be the default in Puppet 4. http://puppetlabs.com/blog/introducing-manifest-ordered-resources You may have caught earlier that I mentioned PowerShell DSC. But what about DSC? Shouldn’t that be what Windows users want to choose? Other CMs are integrating with DSC, will Puppet follow suit and integrate with DSC? The biggest concern that I have with DSC is it’s lack of visibility in fine-grained reporting of changes (which Puppet has). The other is that it is a very young Microsoft product (pre version 3, you know what they say :) ). I tried getting it working in December and ran into some issues. I’m hoping that newer releases are there that actually work, it does have some promising capabilities, it just doesn’t quite come up to the standard of something that should be used in production. In contrast Puppet is almost a ten year old language with an active community! It’s very stable, and when trusting your business to configuration management, you want something that has been around awhile and has been proven. Give DSC another couple of releases and you might see more folks integrating with it. That said there may be a future with DSC integration. Portability and fine-grained reporting of configuration changes are reasons to take a closer look at Puppet on Windows. Yes, Puppet on Windows is here to stay and it’s continually getting better folks.

  Read the article

• Identity R2 - Experts Podcast Series

  - by Tanu Sood

  To follow up on the Identity Management R2 launch, a series of podcasts were recorded with subject matter experts from customer organizations, our partners and Oracle’s PM team to discuss key trends, R2 capabilities, implementation best practices and more. Below is a roll-up of the podcast series that is available on Fusion Middleware radio. R2 Podcasts:   ·         Designing the Next-Generation Identity Platform Vadim Lander, Oracle Highlights: Common architecture model, integration, interoperability and the driving factors behind R2 innovation IT Departments are shifting their Identity Management strategy to be able to support mobile, cloud and social applications. Oracle has anticipated this shift and has built a product roadmap to take advantage of this focus. Join Vadim as he discusses the design strategy behind the latest 11gR2 release and talks about how IDM services have to evolve to meet this new challenge.   ·         BETA Customer Perspective on R2 Ravi Meduri, Kaiser Permanente Highlights: R2 scalability and high availability In this podcast Ravi discusses the new features in 11gR2 that he is most interested in, including High Availability options for Access Management, multi-datacenter architecture, and what it was like working with the Oracle product team during the BETA program.   ·         Partner Perspective on R2 Rex Thexton, PricewaterhouseCoopers Highlights: Usability Enhancements for Users and Administrators A lot of new usability features went into the 11gR2 release making this the most business friendly IDM release to date. In this podcast Rex Thexton, Managing Director from PwC, talks about some of the new UI changes for both end users and administrators, and also about the new connector creation framework.   Access Request Updates in R2 Marc Boroditsky, Oracle Highlights: Access request User Interface innovations A lot of changes have been made to the Access Request user interface in the latest version of Oracle Identity Manager 11gR2. A real focus has been put on making the request process more business user friendly, and a lot of new customization capability has been added for the IT administrators. Hear Marc discuss the updated UI, and explain how administrators will be able to customize OIM to meet their company's requirements   ·         Oracle Optimized System for Oracle Unified Directory (OOS4OUD) Nick Kloski, Oracle Highlights: New Optimized System configuration for Unified Directory One of the new features in 11gR2 is the availability of an Optimized System configuration for Oracle Unified Directory. Oracle engineers installed the OUD software onto off the shelf hardware and then created a performance tuned configuration. Join us as we talk to Nick Kloski, Infrastructure Solutions Manager, all about the testing process and the resulting performance metrics.   Privileged Account Management Mark Wilcox, Oracle Highlights: Oracle Privileged Account Manager key capabilities, use cases The new release of Oracle Identity Management 11g R2 includes the capability to manage privileged accounts. Privileged accounts, if compromised, create a risk for fraud in the enterprise and as a result controlling access to privileged accounts is critical. Hear what Mark Wilcox, Principal Product Manager of Oracle Privileged Account Manager has to say about the capabilities of the offering in this podcast.   ·         Browser-based User Interface (UI) Customization Clayton Donley, Oracle Highlights: Benefits of Durable UI Configuration framework Business users need user interfaces that are not only friendly but also easily customizable. However the downside of any customization project is the cost and complexity involved in developing, testing, deploying and managing custom code. In this podcast, we examine how a new capability in Oracle Identity Management around browser based UI customization can reduce costs and complexity of customization while simplifying self service integration with corporate portal strategies.   ·         Simplifying Mobile and Social Sign-On Dan Killmer, Oracle Highlights: Secure mobile sign-on and consumption of social identities with Oracle Access Management The proliferation of mobile devices has spurred a new trend where employees tend to bring their own mobile devices to work and access corporate applications the same way they would access from a desktop or laptop. In this podcast, we examine how Oracle's latest innovation in Identity Management around Mobile and Social Sign On can simplify security and access management challenges posed by the widespread adoption of mobile devices in the enterprise. ·         Enabling Your Business with IDM R2 Scott Bonnell, Oracle Highlights: Self service, mobile access, personalization Gone are the days when Identity Management was just about stopping unauthorized users in their tracks. Identity Management if done right, can also enable your business. Join Scott Bonnell as he discusses how the IDM 11gR2 release enables the enterprise by providing self service, personalization and mobile access to corporate resources.

  Read the article

• Patch an Existing NK.BIN

  - by Kate Moss' Open Space

  As you know, we can use MAKEIMG.EXE tool to create OS Image file, NK.BIN, or ROMIMAGE.EXE with a BIB for more accurate. But what if the image file is already created but need to be patched or you want to extract a file from NK.BIN? The Platform Builder provide many useful command line utilities, and today I am going to introduce one, BINMOD.EXE. http://msdn.microsoft.com/en-us/library/ee504622.aspx is the official page for BINMOD tool. As the page says, The BinMod Tool (binmod.exe) extracts files from a run-time image, and replaces files in a run-time image and its usage binmod [-i imagename] [-r replacement_filename.ext | -e extraction_filename.ext] This is a simple tool and is easy to use, if we want to extract a file from nk.bin, just type binmod –i nk.bin –e filename.ext And that's it! Or use can try -r command to replace a file inside NK.BIN. The small tool is good but there is a limitation; due to the files in MODULES section are fixed up during ROMIMAGE so the original file format is not preserved, therefore extract or replace file in MODULE section will be impossible. So just like this small tool, this post supposed to be end here, right? Nah... It is not that easy. Just try the above example, and you will find, the tool is not work! Double check the file is in FILES section and the NK.BIN is good, but it just quits. Before you throw away this useless toy, we can try to fix it! Yes, the source of this tool is available in your CE6, private\winceos\COREOS\nk\tools\romimage\binmod. As it is a tool run in your Windows so you need to Windows SDK or Visual Studio to build the code. (I am going to save you some time by skipping the detail as building a desktop console mode program is fairly trivial) The cbinmod.cpp is the core logic for this program and follow up the error message we got, it looks like the following code is suspected.   //   // Extra sanity check...   //   if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast &&       (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= pTOCLoc->dlllast)   {     dprintf("Found pTOC  = 0x%08x\n", (DWORD)dwpTOC);     fFoundIt = true;     break;   }    else    {     dprintf("NOTICE! Record %d looked like a TOC except DLL first = 0x%08X, and DLL last = 0x%08X\r\n", i, pTOCLoc->dllfirst, pTOCLoc->dlllast);   } The logic checks if dllfirst <= dlllast but look closer, the code only separated the high/low WORD from dllfirst but does not apply the same to dlllast, is that on purpose or a bug? While the TOC is created by ROMIMAGE.EXE, so let's move to ROMIMAGE. In private\winceos\coreos\nk\tools\romimage\romimage\bin.cpp    Module::s_romhdr.dllfirst  = (HIWORD(xip_mem->dll_data_bottom) << 16) | HIWORD(xip_mem->kernel_dll_bottom);   Module::s_romhdr.dlllast   = (HIWORD(xip_mem->dll_data_top) << 16)    | HIWORD(xip_mem->kernel_dll_top); It is clear now, the high word of dll first is the upper 16 bits of XIP DLL bottom and the low word is the upper 16 bits of kernel dll bottom; also, the high word of dll last is the upper 16 bits of XIP DLL top and the low word is the upper 16 bits of kernel dll top. Obviously, the correct statement should be if((DWORD)(HIWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(HIWORD(pTOCLoc->dlllast) << 16) &&    (DWORD)(LOWORD(pTOCLoc->dllfirst) << 16) <= (DWORD)(LOWORD(pTOCLoc->dlllast) << 16)) So update the code like this should fix this issue or just like the comment, it is an extra sanity check, you can just get rid of it, either way can make the code moving forward and everything worked as advertised.  "Extracting out copies of files from the nk.bin... replacing files... etc." Since the NK.BIN can be compressed, so the BinMod needs the compress.dll to decompress the data, the DLL can be found in C:\program files\microsoft platform builder\6.00\cepb\idevs\imgutils.

  Read the article

• BizTalk 2009 - Installing BizTalk Server 2009 on XP for Development

  - by StuartBrierley

  At my previous employer, when developing for BizTalk Server 2004 using Visual Studio 2003, we made use of separate development and deployment environments; developing in Visual Studio on our client PCs and then deploying to a seperate shared BizTalk 2004 Server from there.  This server was part of a multi-server Standard BizTalk environment comprising of separate BizTalk Server 2004 and SQL Server 2000 servers.  This environment was implemented a number of years ago by an outside consulting company, and while it worked it did occasionally cause contention issues with three developers deploying to the same server to carry out unit testing! Now that I am making the design and implementation decisions about the environment that BizTalk will be developed in and deployed to, I have chosen to create a single "server" installation on my development PC, installling SQL Server 2008, Visual Studio 2008 and BizTalk Server 2009 on a single system.  The client PC in use is actually a MacBook Pro running Windows XP; not the most powerful of systems for high volume processing but it should be powerful enough to allow development and initial unit testing to take place. I did not need to, and so chose not to, install all of the components detailed in the Microsoft guide for installing BizTalk 2009 on Windows XP but I did follow the basics of the procedures detailed within.  Outlined below are the highlights of this process and any details of what choices I made.   Install IIS I had previsouly installed Windows XP, including all current service packs and critical updates.  At the time of installation this included Service Pack 3, the .Net Framework 3.5 and MS Windows Installer 3.1.  Having a running XP system, my first step was to install IIS - this is quite straightforward and posed no difficulties. Install Visual Studio 2008 The next step for me was to install Visual Studio 2008.  Making sure to select a custom installation is crucial at this point, as you need to make sure that you deselect SQL Server 2005 Express Edition as it can cause the BizTalk installation to fail.  The installation guide suggests that you only select Visual C# when selecting features to install, but  I decided that due to some legacy systems I have code for that I would also select the VB and ASP options. Visual Studio 2008 Service Pack 1 Following the completion of the installation of Visual Studio itself you should then install the Visual Studio 2008 Service Pack 1. SQL Server 2008 Standard Edition The next step before intalling BizTalk Server 2009 itself is to install SQL Server 2008 Standard Edition. On the feature selection screen make sure that you select the follwoing options: Database Engine Services SQL Server Replication Full-Text Search Analysis Services Reporting Services Business Intelligence Development Studio Client Tools Connectivity Integration Services Management Tools Basic and Complete Use the default instance and the same accounts for all SQL server instances - in my case I used the Network Service and Local Service accounts for the two sets of accounts. On the database engine configuration screen I selected windows authentication and added the current user, adding the same user again on the Analysis services Configuration screen.  All other screens were left on the default settings. The SQL Server 2008 installation also included the installation of hotfix for XP KB942288-v3, the Windows Installer 4.5 Redistributable. System Configuration At this stage I took a moment to disable the SQL Server shared memory protocol and enable the Named Pipes and TCP/IP protocols.  These can be found in the SQL Server Configuration Manager > SQL Server Network Configuration > Protocols for MSSQLServer.  I also made sure that the DTC settings were configured correctley.   BizTalk Server 2009 The penultimate step is to install BizTalk Server 2009 Standard Edition. I had previsouly downloaded the redistributable prerequisites as a CAB file so was able to make use of this when carrying out the installation. When selecting which components to install I selected: Server Runtime BizTalk EDI/AS2 Runtime WCF Adapter Runtime Portal Components Administrative Tools WFC Administartion Tools Developer Tools and SDK, Enterprise SSO Administration Module Enterprise SSO Master Secret Server Business Rules Components BAM Alert Provider BAM Client BAM Eventing Once installation has completed clear the launch BizTalk Server Configuration check box and select finish. Verify the Installation Before configuring BizTalk Server it is a good idea to check that BizTalk Server 2009 is installed and that SQL Server 2008 has started correctly.  The easiest way to verify the BizTalk installation is check the Programs and Features in Control panel.  Check that SQL is started by looking in the SQL Server Configuration Manager. Configure BizTalk Server 2009 Finally we are ready to configure BizTalk Server 2009.  To start this I opted for a custom configuration that allowed me to choose in more detail the settings to be used. For all databases I selected the local server and default database names. For all Accounts I used a local account that had been created specifically for the BizTalk Services. For all windows groups I allowed the configuration wizard to create the default local groups. The configuration wizard then ran:   Upon completion you will be presented with a screen detailing the success or failure of the configuration.  If your configuration failed you will need to sort out the issues and try again (it is possible to save the configuration settings for later use if you want too - except passwords of course!).  If you see lots of nice green ticks - congratulations BizTalk Server 2009 on XP is now installed and configured ready for development.

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Is Linear Tape File System (LTFS) Best For Transportable Storage?

  - by rickramsey

  Those of us in tape storage engineering take a lot of pride in what we do, but understand that tape is the right answer to a storage problem only some of the time. And, unfortunately for a storage medium with such a long history, it has built up a few preconceived notions that are no longer valid. When I hear customers debate whether to implement tape vs. disk, one of the common strikes against tape is its perceived lack of usability. If you could go back a few generations of corporate acquisitions, you would discover that StorageTek engineers recognized this problem and started developing a solution where a tape drive could look just like a memory stick to a user. The goal was to not have to care about where files were on the cartridge, but to simply see the list of files that were on the tape, and click on them to open them up. Eventually, our friends in tape over at IBM built upon our work at StorageTek and Sun Microsystems and released the Linear Tape File System (LTFS) feature for the current LTO5 generation of tape drives as an open specification. LTFS is really a wonderful feature and we’re proud to have taken part in its beginnings and, as you’ll soon read, its future. Today we offer LTFS-Open Edition, which is free for you to use in your in Oracle Enterprise Linux 5.5 environment - not only on your LTO5 drives, but also on your Oracle StorageTek T10000C drives. You can download it free from Oracle and try it out. LTFS does exactly what its forefathers imagined. Now you can see immediately which files are on a cartridge. LTFS does this by splitting a cartridge into two partitions. The first holds all of the necessary metadata to create a directory structure for you to easily view the contents of the cartridge. The second partition holds all of the files themselves. When tape media is loaded onto a drive, a complete file system image is presented to the user. Adding files to a cartridge can be as simple as a drag-and-drop just as you do today on your laptop when transferring files from your hard drive to a thumb drive or with standard POSIX file operations. You may be thinking all of this sounds nice, but asking, “when will I actually use it?” As I mentioned at the beginning, tape is not the right solution all of the time. However, if you ever need to physically move data between locations, tape storage with LTFS should be your most cost-effective and reliable answer. I will give you a few use cases examples of when LTFS can be utilized. Media and Entertainment (M&E), Oil and Gas (O&G), and other industries have a strong need for their storage to be transportable. For example, an O&G company hunting for new oil deposits in remote locations takes very large underground seismic images which need to be shipped back to a central data center. M&E operations conduct similar activities when shooting video for productions. M&E companies also often transfers files to third-parties for editing and other activities. These companies have three highly flawed options for transporting data: electronic transfer, disk storage transport, or tape storage transport. The first option, electronic transfer, is impractical because of the expense of the bandwidth required to transfer multi-terabyte files reliably and efficiently. If there’s one place that has bandwidth, it’s your local post office so many companies revert to physically shipping storage media. Typically, M&E companies rely on transporting disk storage between sites even though it, too, is expensive. Tape storage should be the preferred format because as IDC points out, “Tape is more suitable for physical transportation of large amounts of data as it is less vulnerable to mechanical damage during transportation compared with disk" (See note 1, below). However, tape storage has not been used in the past because of the restrictions created by proprietary formats. A tape may only be readable if both the sender and receiver have the same proprietary application used to write the file. In addition, the workflows may be slowed by the need to read the entire tape cartridge during recall. LTFS solves both of these problems, clearing the way for tape to become the standard platform for transferring large files. LTFS is open and, as long as you’ve downloaded the free reader from our website or that of anyone in the LTO consortium, you can read the data. So if a movie studio ships a scene to a third-party partner to add, for example, sounds effects or a music score, it doesn’t have to care what technology the third-party has. If it’s written back to an LTFS-formatted tape cartridge, it can be read. Some tape vendors like to claim LTFS is a “standard,” but beauty is in the eye of the beholder. It’s a specification at this point, not a standard. That said, we’re already seeing application vendors create functionality to write in an LTFS format based on the specification. And it’s my belief that both customers and the tape storage industry will see the most benefit if we all follow the same path. As such, we have volunteered to lead the way in making LTFS a standard first with the Storage Network Industry Association (SNIA), and eventually through to standard bodies such as American National Standards Institute (ANSI). Expect to hear good news soon about our efforts. So, if storage transportability is one of your requirements, I recommend giving LTFS a look. It makes tape much more user-friendly and it’s free, which allows tape to maintain all of its cost advantages over disk! Note 1 - IDC Report. April, 2011. “IDC’s Archival Storage Solutions Taxonomy, 2011” - Brian Zents Website Newsletter Facebook Twitter

  Read the article

• 7 reasons you had to be at JavaOne Latin America 2012

  - by Bruno.Borges

  Yesterday was 12/12/12, and everybody went crazy on Twitter with cool memes like this one. And maybe you are now wondering why I mentioned 7 (seven) on the blog title. Because I want to play numbers? Yes! Today is 7 days after JavaOne Latin America 2012 is over (... and I had to figure out an excuse for taking so long to blog about it...). So unless you were at JavaOne Latin America this year, here are 7 things you missed: OTN Lounge mini-theatreThere was a mini-theatre holding several lightning talks. We had people from SouJava JUG, GoJava JUG, Globalcode, and several other Java gurus and companies running demos, talks, and even more. For example, @drspockbr talked about the ScrumToys project, that demonstrates the power of JSF. Hands On Lab for JAX-RS and WebSocketsOne of the cool things to do during JavaOne is to come to these Hands On labs and really do something using new technologies with the help of experts. This one in particular, was covered by me, Arun Gupta, and Reza Rahman. The HOL had more people than laptops (and we had 48 laptops!) interested on understanding and learning about the new stuff that is coming within Java EE 7. Things like JAX-RS, Server-sent Events and WebSockets. Hey, if you want to try this HOL by yourself, it is available on Github, so go for it! If you have questions, just let me know! Java Community KeynoteThis keynote presented a lot of cool things like startups using Java in their projects, the Duke Awards, SouJava winning the JCP Outstanding Award, the Java Band, and even more! It was really a space where the Java community could present what they are doing and what they want to do. There's a lot of interest on the Adopt-a-JSR program and the Adopt-OpenJDK. There's also an Adopt-a-JavaEE-JSR program! Take a look if you want to participate and Make the Future Java. Java EE (JMS, JAX-RS) sessions from Reza Rahman, the HeavyMetal guyReza is a well know professional and Java EE enthusiast from the communitty who just joined Oracle this year. His sessions were very well attended, perhaps because of a high interest on the new things coming to Java EE 7 like JMS 2.0 and JAX-RS 2.0. If you want to look at what he did at this JavaOne edition, read his blog post. By the way, if you like Java and heavymetal, you should follow him on Twitter as well! :-) Java EE (WebSockets, HTML5) sessions from Arun Gupta, the GlassFish guyIf you don't know Arun Gupta, no worries. You will have time to know about him while you read his Java EE 6 Pocket Guide. Arun has been evangelizing Java EE for a long time, and is now spreading his word about the new upcoming version Java EE 7. He gave one talk about HTML5 Productivity on the Java EE 7 platform, and another one on building web apps with WebSockets. Pretty neat! Arun blogged about JavaOne Latin America as well. Read it here. Java Embedded and JavaFXIf there are two things that are really trending in the Java World right now besides Java EE 7, certainly they are JavaFX and Java Embedded. There were 14 talks covering Java Embedded, from Java Cards to Raspberry.pi, from Java ME to Java on your TV with Ginga-J. The Internet of Things is becoming true, and Java is the only platform today that can connect it all in an standardized and concise way. JavaFX gained a lot of attention too. There were 8 sessions covering what the platform has to offer in terms of Rich User Experience. The JavaFX Scene Builder is an awesome tool to start playing designing an UI, and coding for JavaFX is like coding Swing with 8 hands, one holding your coffee cup. You can achieve a lot, with your two hands (unless, you really have 8 hands, then you can achieve 4 times more :-). If you want to read more about JavaFX, go to Stephen Chin's blog post. GlassFish and Friends Party, 1st edition at JavaOne Lating AmericaThis is probably the thing that I'm most proud. We brought to Brasil the tradition of holding a happy hour for all GlassFish, Java EE friends. This party started almost 7 years ago in San Francisco, and it was about time to bring it to Brazil! The party happened on Tuesday night, right after JavaOne General Keynote, at the Tribeca Pub. We had about 80 attendees and met a lot of Java EE developers there! People from JUGs, Oracle, Locaweb and Red Hat showed up too, including some execs from Oracle that didn't resist and could not miss a party like this one.Lots of caipirinhas, beer and food to everyone, some cool music... even The Fish walking around the party with Juggy!You can see more photos from the party on an album I shared with the recently created GlassFish Brasil community on Google+ here (but you may be more interested in joining the GlassFish english community). There's also more pictures that Arun took and shared on this link. So now you may want to consider coming to Brazil next year! Java EE 7 is on its way, and Brazil is happily and patiently waiting for it, with a lot of enthusiasm. By the way, GlassFish and Java EE 6 just celebrated a Happy Birthday!

  Read the article

• Timeout Considerations for Solicit Response – Part 2

  - by Michael Stephenson

  To follow up a previous article about timeouts and how they can affect your application I have extended the sample we were using to include WCF. I will execute some test scenarios and discuss the results. The sample We begin by consuming exactly the same web service which is sitting on a remote server. This time I have created a .net 3.5 application which will consume the web service using the basichttp binding. To show you the configuration for the consumption of this web service please refer to the below diagram. You can see like before we also have the connectionManagement element in the configuration file. I have added a WCF service reference (also using the asynchronous proxy methods) and have the below code sample in the application which will asynchronously make the web service calls and handle the responses on a call back method invoked by a delegate. If you have read the previous article you will notice that the code is almost the same.   Sample 1 – WCF with Default Timeouts In this test I set about recreating the same scenario as previous where we would run the test but this time using WCF as the messaging component. For the first test I would use the default configuration settings which WCF had setup when we added a reference to the web service. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client-side trace is as follows:   The server-side trace is as follows: Some observations on the results are as follows: The timeouts happened quicker than in the previous tests because some calls were timing out before they attempted to connect to the server The first few calls that timed out did actually connect to the server and did execute successfully on the server   Test 2 – Increase Open Connection Timeout & Send Timeout In this test I wanted to increase both the send and open timeout values to try and give everything a chance to go through. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The client side trace for this test was   The server-side trace for this test was: Some observations on this test are: This test proved if the timeouts are high enough everything will just go through   Test 3 – Increase just the Send Timeout In this test we wanted to increase just the send timeout. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:10:00"   The Test We simulated 21 calls to the web service   Test Results The below is the client side trace The below is the server side trace Some observations on this test are: In this test from both the client and server perspective everything ran through fine The open connection timeout did not seem to have any effect   Test 4 – Increase Just the Open Connection Timeout In this test I wanted to validate the change to the open connection setting by increasing just this on its own. The timeout values for this test are: closeTimeout="00:01:00" openTimeout="00:10:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"   The Test We simulated 21 calls to the web service Test Results The client side trace was The server side trace was Some observations on this test are: In this test you can see that the open connection which relates to opening the channel timeout increase was not the thing which stopped the calls timing out It's the send of data which is timing out On the server you can see that the successful few calls were fine but there were also a few calls which hit the server but timed out on the client You can see that not all calls hit the server which was one of the problems with the WSE and ASMX options   Test 5 – Smaller Increase in Send Timeout In this test I wanted to make a smaller increase to the send timeout than previous just to prove that it was the key setting which was controlling what was timing out. The timeout values for this test are: openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:02:30"   The Test We simulated 21 calls to the web service Test Results The client side trace was   The server side trace was Some observations on this test are: You can see that most of the calls got through fine On the client you can see that call 20 timed out but still hit the server and executed fine.   Summary At this point between the two articles we have quite a lot of scenarios showing the different way the timeout setting have played into our original performance issue, and now we can see how WCF could offer an improved way to handle the problem. To summarise the differences in the timeout properties for the three technology stacks: ASMX The timeout value only applies to the execution time of your request on the server. The timeout does not consider how long your code might be waiting client side to get a connection. WSE The timeout value includes both the time to obtain a connection and also the time to execute the request. A timeout will not be thrown as an error until an attempt to connect to the server is made. This means a 40 second timeout setting may not throw the error until 60 seconds when the connection to the server is made. If the connection to the server is made you should be aware that your message will be processed and you should design for this. WCF The WCF send timeout is the setting most equivalent to the settings we were looking at previously. Like WSE this setting the counter includes the time to get a connection as well as the time to execute on a server. Unlike WSE and ASMX an error will be thrown as soon as the send timeout from making your call from user code has elapsed regardless of whether we are waiting for a connection or have an open connection to the server. This may to a user appear to have better latency in getting an error response compared to WSE or ASMX.

  Read the article

• Online Password Security Tactics

  - by BuckWoody

  Recently two more large databases were attacked and compromised, one at the popular Gawker Media sites and the other at McDonald’s. Every time this kind of thing happens (which is FAR too often) it should remind the technical professional to ensure that they secure their systems correctly. If you write software that stores passwords, it should be heavily encrypted, and not human-readable in any storage. I advocate a different store for the login and password, so that if one is compromised, the other is not. I also advocate that you set a bit flag when a user changes their password, and send out a reminder to change passwords if that bit isn’t changed every three or six months.    But this post is about the *other* side – what to do to secure your own passwords, especially those you use online, either in a cloud service or at a provider. While you’re not in control of these breaches, there are some things you can do to help protect yourself. Most of these are obvious, but they contain a few little twists that make the process easier.   Use Complex Passwords This is easily stated, and probably one of the most un-heeded piece of advice. There are three main concepts here: ·         Don’t use a dictionary-based word ·         Use mixed case ·         Use punctuation, special characters and so on   So this: password Isn’t nearly as safe as this: P@ssw03d   Of course, this only helps if the site that stores your password encrypts it. Gawker does, so theoretically if you had the second password you’re in better shape, at least, than the first. Dictionary words are quickly broken, regardless of the encryption, so the more unusual characters you use, and the farther away from the dictionary words you get, the better.   Of course, this doesn’t help, not even a little, if the site stores the passwords in clear text, or the key to their encryption is broken. In that case…   Use a Different Password at Every Site What? I have hundreds of sites! Are you kidding me? Nope – I’m not. If you use the same password at every site, when a site gets attacked, the attacker will store your name and password value for attacks at other sites. So the only safe thing to do is to use different names or passwords (or both) at each site. Of course, most sites use your e-mail as a username, so you’re kind of hosed there. So even though you have hundreds of sites you visit, you need to have at least a different password at each site.   But it’s easier than you think – if you use an algorithm.   What I’m describing is to pick a “root” password, and then modify that based on the site or purpose. That way, if the site is compromised, you can still use that root password for the other sites.   Let’s take that second password: P@ssw03d   And now you can append, prepend or intersperse that password with other characters to make it unique to the site. That way you can easily remember the root password, but make it unique to the site. For instance, perhaps you read a lot of information on Gawker – how about these:   P@ssw03dRead ReadP@ssw03d PR@esasdw03d   If you have lots of sites, tracking even this can be difficult, so I recommend you use password software such as Password Safe or some other tool to have a secure database of your passwords at each site. DO NOT store this on the web. DO NOT use an Office document (Microsoft or otherwise) that is “encrypted” – the encryption office automation packages use is very trivial, and easily broken. A quick web search for tools to do that should show you how bad a choice this is.   Change Your Password on a Schedule I know. It’s a real pain. And it doesn’t seem worth it…until your account gets hacked. A quick note here – whenever a site gets hacked (and I find out about it) I change the password at that site immediately (or quit doing business with them) and then change the root password on every site, as quickly as I can.   If you follow the tip above, it’s not as hard. Just add another number, year, month, day, something like that into the mix. It’s not unlike making a Primary Key in an RDBMS.   P@ssw03dRead10242010   Change the site, and then update your password database. I do this about once a month, on the first or last day, during staff meetings. (J)   If you have other tips, post them here. We can all learn from each other on this.

  Read the article

• Trace File Source Adapter

  The Trace File Source adapter is a useful addition to your SSIS toolbox.  It allows you to read 2005 and 2008 profiler traces stored as .trc files and read them into the Data Flow.  From there you can perform filtering and analysis using the power of SSIS. There is no need for a SQL Server connection this just uses the trace file. Example Usages Cache warming for SQL Server Analysis Services Reading the flight recorder Find out the longest running queries on a server Analyze statements for CPU, memory by user or some other criteria you choose Properties The Trace File Source adapter has two properties, both of which combine to control the source trace file that is read at runtime. SQL Server 2005 and SQL Server 2008 trace files are supported for both the Database Engine (SQL Server) and Analysis Services. The properties are managed by the Editor form or can be set directly from the Properties Grid in Visual Studio. Property Type Description AccessMode Enumeration This property determines how the Filename property is interpreted. The values available are: DirectInput Variable Filename String This property holds the path for trace file to load (*.trc). The value is either a full path, or the name of a variable which contains the full path to the trace file, depending on the AccessMode property. Trace Column Definition Hopefully the majority of you can skip this section entirely, but if you encounter some problems processing a trace file this may explain it and allow you to fix the problem. The component is built upon the trace management API provided by Microsoft. Unfortunately API methods that expose the schema of a trace file have known issues and are unreliable, put simply the data often differs from what was specified. To overcome these limitations the component uses  some simple XML files. These files enable the trace column data types and sizing attributes to be overridden. For example SQL Server Profiler or TMO generated structures define EventClass as an integer, but the real value is a string. TraceDataColumnsSQL.xml  - SQL Server Database Engine Trace Columns TraceDataColumnsAS.xml    - SQL Server Analysis Services Trace Columns The files can be found in the %ProgramFiles%\Microsoft SQL Server\100\DTS\PipelineComponents folder, e.g. "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsSQL.xml" "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml" If at runtime the component encounters a type conversion or sizing error it is most likely due to a discrepancy between the column definition as reported by the API and the actual value encountered. Whilst most common issues have already been fixed through these files we have implemented specific exception traps to direct you to the files to enable you to fix any further issues due to different usage or data scenarios that we have not tested. An example error that you can fix through these files is shown below. Buffer exception writing value to column 'Column Name'. The string value is 999 characters in length, the column is only 111. Columns can be overridden by the TraceDataColumns XML files in "C:\Program Files\Microsoft SQL Server\100\DTS\PipelineComponents\TraceDataColumnsAS.xml". Installation The component is provided as an MSI file which you can download and run to install it. This simply places the files on disk in the correct locations and also installs the assemblies in the Global Assembly Cache as per Microsoft’s recommendations. You may need to restart the SQL Server Integration Services service, as this caches information about what components are installed, as well as restarting any open instances of Business Intelligence Development Studio (BIDS) / Visual Studio that you may be using to build your SSIS packages. Finally you will have to add the transformation to the Visual Studio toolbox manually. Right-click the toolbox, and select Choose Items.... Select the SSIS Data Flow Items tab, and then check the Trace File Source transformation in the Choose Toolbox Items window. This process has been described in detail in the related FAQ entry for How do I install a task or transform component? We recommend you follow best practice and apply the current Microsoft SQL Server Service pack to your SQL Server servers and workstations. Please note that the Microsoft Trace classes used in the component are not supported on 64-bit platforms. To use the Trace File Source on a 64-bit host you need to ensure you have the 32-bit (x86) tools available, and the way you execute your package is setup to use them, please see the help topic 64-bit Considerations for Integration Services for more details. Downloads Trace Sources for SQL Server 2005 -- Trace Sources for SQL Server 2008 Version History SQL Server 2008 Version 2.0.0.382 - SQL Sever 2008 public release. (9 Apr 2009) SQL Server 2005 Version 1.0.0.321 - SQL Server 2005 public release. (18 Nov 2008) -- Screenshots

  Read the article

• T-SQL Tuesday #21 - Crap!

  - by Most Valuable Yak (Rob Volk)

  Adam Machanic's (blog | twitter) ever popular T-SQL Tuesday series is being held on Wednesday this time, and the topic is… SHIT CRAP. No, not fecal material.  But crap code.  Crap SQL.  Crap ideas that you thought were good at the time, or were forced to do due (doo-doo?) to lack of time. The challenge for me is to look back on my SQL Server career and find something that WASN'T crap.  Well, there's a lot that wasn't, but for some reason I don't remember those that well.  So the additional challenge is to pick one particular turd that I really wish I hadn't squeezed out.  Let's see if this outline fits the bill: An ETL process on text files; That had to interface between SQL Server and an AS/400 system; That didn't use SSIS (should have) or BizTalk (ummm, no) but command-line scripting, using Unix utilities(!) via: xp_cmdshell; That had to email reports and financial data, some of it sensitive Yep, the stench smell is coming back to me now, as if it was yesterday… As to why SSIS and BizTalk were not options, basically I didn't know either of them well enough to get the job done (and I still don't).  I also had a strict deadline of 3 days, in addition to all the other responsibilities I had, so no time to learn them.  And seeing how screwed up the rest of the process was: Payment files from multiple vendors in multiple formats; Sent via FTP, PGP encrypted email, or some other wizardry; Manually opened/downloaded and saved to a particular set of folders (couldn't change this); Once processed, had to be placed BACK in the same folders with the original archived; x2 divisions that had to run separately; Plus an additional vendor file in another format on a completely different schedule; So that they could be MANUALLY uploaded into the AS/400 system (couldn't change this either, even if it was technically possible) I didn't feel so bad about the solution I came up with, which was naturally: Copy the payment files to the local SQL Server drives, using xp_cmdshell Run batch files (via xp_cmdshell) to parse the different formats using sed, a Unix utility (this was before Powershell) Use other Unix utilities (join, split, grep, wc) to process parsed files and generate metadata (size, date, checksum, line count) Run sqlcmd to execute a stored procedure that passed the parsed file names so it would bulk load the data to do a comparison bcp the compared data out to ANOTHER text file so that I could grep that data out of the original file Run another stored procedure to import the matched data into SQL Server so it could process the payments, including file metadata Process payment batches and log which division and vendor they belong to Email the payment details to the finance group (since it was too hard for them to run a web report with the same data…which they ran anyway to compare the emailed file against…which always matched, surprisingly) Email another report showing unmatched payments so they could manually void them…about 3 months afterward All in "Excel" format, using xp_sendmail (SQL 2000 system) Copy the unmatched data back to the original folder locations, making sure to match the file format exactly (if you've ever worked with ACH files, you'll understand why this sucked) If you're one of the 10 people who have read my blog before, you know that I love the DOS "for" command.  Like passionately.  Like fairy-tale love.  So my batch files were riddled with for loops, nested within other for loops, that called other batch files containing for loops.  I think there was one section that had 4 or 5 nested for commands.  It was wrong, disturbed, and completely un-maintainable by anyone, even myself.  Months, even a year, after I left the company I got calls from someone who had to make a minor change to it, and they called me to talk them out of spraying the office with an AK-47 after looking at this code.  (for you Star Trek TOS fans) The funniest part of this, well, one of the funniest, is that I made the deadline…sort of, I was only a day late…and the DAMN THING WORKED practically unchanged for 3 years.  Most of the problems came from the manual parts of the overall process, like forgetting to decrypt the files, or missing/late files, or saved to the wrong folders.  I'm definitely not trying to toot my own horn here, because this was truly one of the dumbest, crappiest solutions I ever came up with.  Fortunately as far as I know it's no longer in use and someone has written a proper replacement.  Today I would knuckle down and do it in SSIS or Powershell, even if it took me weeks to get it right. The real lesson from this crap code is to make things MAINTAINABLE and UNDERSTANDABLE.  sed scripting regular expressions doesn't fit that criteria in any way.  If you ever find yourself under pressure to do something fast at all costs, DON'T DO IT.  Stop and consider long-term maintainability, not just for yourself but for others on your team.  If you can't explain the basic approach in under 5 minutes, it ultimately won't succeed.  And while you may love to leave all that crap behind, it may follow you anyway, and you'll step in it again.   P.S. - if you're wondering about all the manual stuff that couldn't be changed, it was because the entire process had gone through Six Sigma, and was deemed the best possible way.  Phew!  Talk about stink!

  Read the article

• Getting started with Oracle Database In-Memory Part III - Querying The IM Column Store

  - by Maria Colgan

  In my previous blog posts, I described how to install, enable, and populate the In-Memory column store (IM column store). This weeks post focuses on how data is accessed within the IM column store. Let’s take a simple query “What is the most expensive air-mail order we have received to date?” SELECT Max(lo_ordtotalprice) most_expensive_order FROM lineorderWHERE  lo_shipmode = 5; The LINEORDER table has been populated into the IM column store and since we have no alternative access paths (indexes or views) the execution plan for this query is a full table scan of the LINEORDER table. You will notice that the execution plan has a new set of keywords “IN MEMORY" in the access method description in the Operation column. These keywords indicate that the LINEORDER table has been marked for INMEMORY and we may use the IM column store in this query. What do I mean by “may use”? There are a small number of cases were we won’t use the IM column store even though the object has been marked INMEMORY. This is similar to how the keyword STORAGE is used on Exadata environments. You can confirm that the IM column store was actually used by examining the session level statistics, but more on that later. For now let's focus on how the data is accessed in the IM column store and why it’s faster to access the data in the new column format, for analytical queries, rather than the buffer cache. There are four main reasons why accessing the data in the IM column store is more efficient. 1. Access only the column data needed The IM column store only has to scan two columns – lo_shipmode and lo_ordtotalprice – to execute this query while the traditional row store or buffer cache has to scan all of the columns in each row of the LINEORDER table until it reaches both the lo_shipmode and the lo_ordtotalprice column. 2. Scan and filter data in it's compressed format When data is populated into the IM column it is automatically compressed using a new set of compression algorithms that allow WHERE clause predicates to be applied against the compressed formats. This means the volume of data scanned in the IM column store for our query will be far less than the same query in the buffer cache where it will scan the data in its uncompressed form, which could be 20X larger. 3. Prune out any unnecessary data within each column The fastest read you can execute is the read you don’t do. In the IM column store a further reduction in the amount of data accessed is possible due to the In-Memory Storage Indexes(IM storage indexes) that are automatically created and maintained on each of the columns in the IM column store. IM storage indexes allow data pruning to occur based on the filter predicates supplied in a SQL statement. An IM storage index keeps track of minimum and maximum values for each column in each of the In-Memory Compression Unit (IMCU). In our query the WHERE clause predicate is on the lo_shipmode column. The IM storage index on the lo_shipdate column is examined to determine if our specified column value 5 exist in any IMCU by comparing the value 5 to the minimum and maximum values maintained in the Storage Index. If the value 5 is outside the minimum and maximum range for an IMCU, the scan of that IMCU is avoided. For the IMCUs where the value 5 does fall within the min, max range, an additional level of data pruning is possible via the metadata dictionary created when dictionary-based compression is used on IMCU. The dictionary contains a list of the unique column values within the IMCU. Since we have an equality predicate we can easily determine if 5 is one of the distinct column values or not. The combination of the IM storage index and dictionary based pruning, enables us to only scan the necessary IMCUs. 4. Use SIMD to apply filter predicates For the IMCU that need to be scanned Oracle takes advantage of SIMD vector processing (Single Instruction processing Multiple Data values). Instead of evaluating each entry in the column one at a time, SIMD vector processing allows a set of column values to be evaluated together in a single CPU instruction. The column format used in the IM column store has been specifically designed to maximize the number of column entries that can be loaded into the vector registers on the CPU and evaluated in a single CPU instruction. SIMD vector processing enables the Oracle Database In-Memory to scan billion of rows per second per core versus the millions of rows per second per core scan rate that can be achieved in the buffer cache. I mentioned earlier in this post that in order to confirm the IM column store was used; we need to examine the session level statistics. You can monitor the session level statistics by querying the performance views v$mystat and v$statname. All of the statistics related to the In-Memory Column Store begin with IM. You can see the full list of these statistics by typing: display_name format a30 SELECT display_name FROM v$statname WHERE  display_name LIKE 'IM%'; If we check the session statistics after we execute our query the results would be as follow; SELECT Max(lo_ordtotalprice) most_expensive_order FROM lineorderWHERE lo_shipmode = 5; SELECT display_name FROM v$statname WHERE  display_name IN ('IM scan CUs columns accessed',                        'IM scan segments minmax eligible',                        'IM scan CUs pruned'); As you can see, only 2 IMCUs were accessed during the scan as the majority of the IMCUs (44) in the LINEORDER table were pruned out thanks to the storage index on the lo_shipmode column. In next weeks post I will describe how you can control which queries use the IM column store and which don't. +Maria Colgan

  Read the article

• So you want a French Site?

  - by juanlarios

  I thought I would write a quick write up of how to create a french site in SharePoint 2007. I'm not talking about a Variation but just a plain French Site from the ground up. There were some gotchas that I felt were worth blogging about. First:  go to Microsoft Telnet Article and follow the install instructions. Make sure that when you get to the download page that you select "French" as part of the drop down and you download and install the right language pack. I noticed that if you did not click the "change" button enven though I selected the 'french' language pack, it reverted back to the english language pack.   Second: You will notice a couple of things. When you go to central admin you will see the following:    Now you can pick between french site or english. You will get this if you install other language packs and they will be listed in the drop down. You will notice that you now have french headings and frech listings of sites. You see "Publishing" as a heading because I have a custom site definition that I deployed as a french site. Third: As you start navigating around and trying to create document libraries or sites you will start getting errors. Errors like the following: "Cannot make a cache safe URL for "SelectorControls.js", file not found. Please verify that the file exists under the layouts directory. " Troubleshoot issues with Windows SharePoint Services. Once you resolve the issue with this "js" file, you will find that there are other js files that are missing. The only problem is that if you are not fluent in French or the language you are trying to deploy, Well, you'll have a tough time understanding error messages as they will all be in the new language you are trying to deploy. So let's just talk about what happened when you installed the language pack. In the 12 Hive:  12/Template    you will now see a 1033 folder and a 1036 folder. The 1036 folder is the folder that was created and added as part of the language pack. What the above error is saying is that now that it's looking at the 1036 folder, well, it's missing some files. The nice thing is that these files are included in the 1033 folder (which is the English Language Pack). Simply copy and paste the controls from the one folder to the other. There will be more than one conflict so you will have to move serveral controls over. Can't remember how many but simply add them as error messages come up. I had to add some navigation controls and some content selectors.   Now that's all that you need to install the Frech Language pack anc reate site collections that are entirely in a another language. Do not mistake this with Variations, where you can have multiple language sites. For those of you doing a little bit extra with this, let me share what I was doing extra and what I needed to get it working for me. I had had a custom site definition which was obviously not showing up in my selection of french sites. I was under the impression that all sites in English would show up in french and that the sites were simply routed to a new Resource file for french content. And that is the case but there is a little extra that needs to be done if you have a custom site definition deployed:  First: Under hive 12/Template/1033/XML  there is a listing of site definition files that are deployed to the English side of things. If you navigate to 12/Template/1036/XML  and open one of the site definitions you will see that they are similar and reference the existing site definitions installed on the server, except that they have some french added to descriptions and names. Simply copy the xml file of your custom template to the 1036 folder to have it show up as a selection when you select French as the dropdown entry when create a site colleciton. You can go ahead and change the description and name to suit the language it's under.    Second: As part of my site definition, I packaed up several list templates, that were saved as STP files. When you navigate to the list template listing, well, the templates are for English sites, not French so I cannot create document libraries based on the template. What now? well here comes KWIzCom to the rescue! They seem to have put out a "STP language converter" where you can take a site template or list template and convert it to any target language you are after. It's a free download, Use it and you're good to go.  One thing I will mention is that when I convereted the English documents I whent ahead and converted them to French-Canadien. And it didn't work! so I finally figured out that the French Version it was expecting in the french site was "French-France". Don't know why that is, it's just what needs to be done to get that working. When I did that, I was able to use the List templates that I created in the English site for the French Site.   Hope it helps , good luck!

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >