security roles - Page 192

What is the correct procedure to install a Drupal security patch?

- by Dan Albey

The back-end admin interface informs me that there is a new security patch for Drupal 6, but I can find any information about ho wto install it.

Process for Securing Web Sites and Applications

The following quick-start guide provides a detailed overview of how to configure security for IIS 6.0. Reduce the Attack Surface of the Web Server 1. Enable only essential Windows Server 2003 components and services. 2. Enable only essential IIS 6.0 components and services. 3. Enable only essential Web service extensions. 4. Enable only essential Multipurpose Internet Mail Extensions (MIME) types. 5. Configure Windows Server 2003 security settings. Prevent Unauthorized Access to Web Sites and Applications 1. Store content on a dedicated disk volume. 2. Set IIS Web site permissions. 3. Set IP address and domain name restrictions. 4. Set the NTFS file system permissions. Isolate Web Sites and Applications 1. Evaluate the effects of impersonation on application compatibility: 2· Identify the impersonation behavior for ASP applications. 3· Select the impersonation behavior for ASP.NET applications. 4. Configure Web sites and applications for isolation. Configure User Authentication 1. Configure Web site authentication. 2· Select the Web site authentication method. 3· Configure the Web site authentication method. 4. Configure File Transfer Protocol (FTP) site authentication. Encrypt Confidential Data Exchanged with Clients 1. Use Secure Sockets Layer (SSL) to encrypt confidential data. 2. Use Internet Protocol security (IPSec) or virtual private network (VPN) with remote administration. Maintain Web Site and Application Security 1. Obtain and apply current security patches. 2. Enable Windows Server 2003 security logs. 3. Enable file access auditing for Web site content. 4. Configure IIS logs. 5. Review security policies, processes, and procedures. Note:To secure the Web sites and applications in a Web farm, use the process described in this chapter to configure security for each server in the Web farm. Link:http://www.studentacad.com/post/2010/04/28/Process-for-Securing-Web-Sites-and-Applications.aspx

Read the article

Whitepaper list for the application framework

- by Rick Finley

We're reposting the list of technical whitepapers for the Oracle ETPM framework (called OUAF, Oracle Utilities Application Framework). These are are available from My Oracle Support at the Doc Id's mentioned below. Some have been updated in the last few months to reflect new advice and new features. This is reposted from the OUAF blog: http://blogs.oracle.com/theshortenspot/entry/whitepaper_list_as_at_november Doc Id Document Title Contents 559880.1 ConfigLab Design Guidelines This whitepaper outlines how to design and implement a data management solution using the ConfigLab facility. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 560367.1 Technical Best Practices for Oracle Utilities Application Framework Based Products Whitepaper summarizing common technical best practices used by partners, implementation teams and customers. 560382.1 Performance Troubleshooting Guideline Series A set of whitepapers on tracking performance at each tier in the framework. The individual whitepapers are as follows: Concepts - General Concepts and Performance Troublehooting processes Client Troubleshooting - General troubleshooting of the browser client with common issues and resolutions. Network Troubleshooting - General troubleshooting of the network with common issues and resolutions. Web Application Server Troubleshooting - General troubleshooting of the Web Application Server with common issues and resolutions. Server Troubleshooting - General troubleshooting of the Operating system with common issues and resolutions. Database Troubleshooting - General troubleshooting of the database with common issues and resolutions. Batch Troubleshooting - General troubleshooting of the background processing component of the product with common issues and resolutions. 560401.1 Software Configuration Management Series A set of whitepapers on how to manage customization (code and data) using the tools provided with the framework. The individual whitepapers are as follows: Concepts - General concepts and introduction. Environment Management - Principles and techniques for creating and managing environments. Version Management - Integration of Version control and version management of configuration items. Release Management - Packaging configuration items into a release. Distribution - Distribution and installation of releases across environments Change Management - Generic change management processes for product implementations. Status Accounting - Status reporting techniques using product facilities. Defect Management - Generic defect management processes for product implementations. Implementing Single Fixes - Discussion on the single fix architecture and how to use it in an implementation. Implementing Service Packs - Discussion on the service packs and how to use them in an implementation. Implementing Upgrades - Discussion on the the upgrade process and common techniques for minimizing the impact of upgrades. 773473.1 Oracle Utilities Application Framework Security Overview A whitepaper summarizing the security facilities in the framework. Now includes references to other Oracle security products supported. 774783.1 LDAP Integration for Oracle Utilities Application Framework based products Updated! A generic whitepaper summarizing how to integrate an external LDAP based security repository with the framework. 789060.1 Oracle Utilities Application Framework Integration Overview A whitepaper summarizing all the various common integration techniques used with the product (with case studies). 799912.1 Single Sign On Integration for Oracle Utilities Application Framework based products A whitepaper outlining a generic process for integrating an SSO product with the framework. 807068.1 Oracle Utilities Application Framework Architecture Guidelines This whitepaper outlines the different variations of architecture that can be considered. Each variation will include advice on configuration and other considerations. 836362.1 Batch Best Practices for Oracle Utilities Application Framework based products This whitepaper outlines the common and best practices implemented by sites all over the world. 856854.1 Technical Best Practices V1 Addendum Addendum to Technical Best Practices for Oracle Utilities Customer Care And Billing V1.x only. 942074.1 XAI Best Practices This whitepaper outlines the common integration tasks and best practices for the Web Services Integration provided by the Oracle Utilities Application Framework. 970785.1 Oracle Identity Manager Integration Overview This whitepaper outlines the principals of the prebuilt intergration between Oracle Utilities Application Framework Based Products and Oracle Identity Manager used to provision user and user group security information. For Fw4.x customers use whitepaper 1375600.1 instead. 1068958.1 Production Environment Configuration Guidelines A whitepaper outlining common production level settings for the products based upon benchmarks and customer feedback. 1177265.1 What's New In Oracle Utilities Application Framework V4? Whitepaper outlining the major changes to the framework since Oracle Utilities Application Framework V2.2. 1290700.1 Database Vault Integration Whitepaper outlining the Database Vault Integration solution provided with Oracle Utilities Application Framework V4.1.0 and above. 1299732.1 BI Publisher Guidelines for Oracle Utilities Application Framework Whitepaper outlining the interface between BI Publisher and the Oracle Utilities Application Framework 1308161.1 Oracle SOA Suite Integration with Oracle Utilities Application Framework based products This whitepaper outlines common design patterns and guidelines for using Oracle SOA Suite with Oracle Utilities Application Framework based products. 1308165.1 MPL Best Practices Oracle Utilities Application Framework This is a guidelines whitepaper for products shipping with the Multi-Purpose Listener. This whitepaper currently only applies to the following products: Oracle Utilities Customer Care And Billing Oracle Enterprise Taxation Management Oracle Enterprise Taxation and Policy Management 1308181.1 Oracle WebLogic JMS Integration with the Oracle Utilities Application Framework This whitepaper covers the native integration between Oracle WebLogic JMS with Oracle Utilities Application Framework using the new Message Driven Bean functionality and real time JMS adapters. 1334558.1 Oracle WebLogic Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using Oracle WebLogic for Oracle Utilities Application Framework based products. 1359369.1 IBM WebSphere Clustering for Oracle Utilities Application Framework New! This whitepaper covers process for implementing clustering using IBM WebSphere for Oracle Utilities Application Framework based products 1375600.1 Oracle Identity Management Suite Integration with the Oracle Utilities Application Framework New! This whitepaper covers the integration between Oracle Utilities Application Framework and Oracle Identity Management Suite components such as Oracle Identity Manager, Oracle Access Manager, Oracle Adaptive Access Manager, Oracle Internet Directory and Oracle Virtual Directory. 1375615.1 Advanced Security for the Oracle Utilities Application Framework New! This whitepaper covers common security requirements and how to meet those requirements using Oracle Utilities Application Framework native security facilities, security provided with the J2EE Web Application and/or facilities available in Oracle Identity Management Suite.

Read the article

Should I be using WAI-ARIA in my HTML website builds?

- by DBUK

Should I be using WAI-ARIA in my website builds? Will it have any benefit? Is anyone adding 'role' to their code at the moment? The tab, link, checkbox and slider roles, plus many more, aren't available yet for HTML5. From looking at the list of what is available (see below), and what will be coming in the future, it looks like we might be applying roles to a huge amount of tags on our pages. Its not an issue especially if it brings benefit to users using readers etc Also, a side question, will search engines give any benefits to sites using WAI-ARIA? List of safe roles to use (I think) • role="article" • role="banner" • role="complementary" • role="contentinfo" • role="form" • role="heading" • role="main" • role="navigation" • role="search" Examples of usage: <header role="banner"></div>for a main header, banner only allowed once per page <header role="heading"></div>- for all headers after the main one <aside role="complementary"></aside> <form role="search"></form>

Read the article

Documentation Changes in Solaris 11.1

- by alanc

One of the first places you can see Solaris 11.1 changes are in the docs, which have now been posted in the Solaris 11.1 Library on docs.oracle.com. I spent a good deal of time reviewing documentation for this release, and thought some would be interesting to blog about, but didn't review all the changes (not by a long shot), and am not going to cover all the changes here, so there's plenty left for you to discover on your own. Just comparing the Solaris 11.1 Library list of docs against the Solaris 11 list will show a lot of reorganization and refactoring of the doc set, especially in the system administration guides. Hopefully the new break down will make it easier to get straight to the sections you need when a task is at hand. Packaging System Unfortunately, the excellent in-depth guide for how to build packages for the new Image Packaging System (IPS) in Solaris 11 wasn't done in time to make the initial Solaris 11 doc set. An interim version was published shortly after release, in PDF form on the OTN IPS page. For Solaris 11.1 it was included in the doc set, as Packaging and Delivering Software With the Image Packaging System in Oracle Solaris 11.1, so should be easier to find, and easier to share links to specific pages the HTML version. Beyond just how to build a package, it includes details on how Solaris is packaged, and how package updates work, which may be useful to all system administrators who deal with Solaris 11 upgrades & installations. The Adding and Updating Oracle Solaris 11.1 Software Packages was also extended, including new sections on Relaxing Version Constraints Specified by Incorporations and Locking Packages to a Specified Version that may be of interest to those who want to keep the Solaris 11 versions of certain packages when they upgrade, such as the couple of packages that had functionality removed by an (unusual for an update release) End of Feature process in the 11.1 release. Also added in this release is a document containing the lists of all the packages in each of the major package groups in Solaris 11.1 (solaris-desktop, solaris-large-server, and solaris-small-server). While you can simply get the contents of those groups from the package repository, either via the web interface or the pkg command line, the documentation puts them in handy tables for easier side-by-side comparison, or viewing the lists before you've installed the system to pick which one you want to initially install. X Window System We've not had good X11 coverage in the online Solaris docs in a while, mostly relying on the man pages, and upstream X.Org docs. In this release, we've integrated some X coverage into the Solaris 11.1 Desktop Adminstrator's Guide, including sections on installing fonts for fontconfig or legacy X11 clients, X server configuration, and setting up remote access via X11 or VNC. Of course we continue to work on improving the docs, including a lot of contributions to the upstream docs all OS'es share (more about that another time). Security One of the things Oracle likes to do for its products is to publish security guides for administrators & developers to know how to build systems that meet their security needs. For Solaris, we started this with Solaris 11, providing a guide for sysadmins to find where the security relevant configuration options were documented. The Solaris 11.1 Security Guidelines extend this to cover new security features, such as Address Space Layout Randomization (ASLR) and Read-Only Zones, as well as adding additional guidelines for existing features, such as how to limit the size of tmpfs filesystems, to avoid users driving the system into swap thrashing situations. For developers, the corresponding document is the Developer's Guide to Oracle Solaris 11 Security, which has been the source for years for documentation of security-relevant Solaris API's such as PAM, GSS-API, and the Solaris Cryptographic Framework. For Solaris 11.1, a new appendix was added to start providing Secure Coding Guidelines for Developers, leveraging the CERT Secure Coding Standards and OWASP guidelines to provide the base recommendations for common programming languages and their standard API's. Solaris specific secure programming guidance was added via links to other documentation in the product doc set. In parallel, we updated the Solaris C Libary Functions security considerations list with details of Solaris 11 enhancements such as FD_CLOEXEC flags, additional *at() functions, and new stdio functions such as asprintf() and getline(). A number of code examples throughout the Solaris 11.1 doc set were updated to follow these recommendations, changing unbounded strcpy() calls to strlcpy(), sprintf() to snprintf(), etc. so that developers following our examples start out with safer code. The Writing Device Drivers guide even had the appendix updated to list which of these utility functions, like snprintf() and strlcpy(), are now available via the Kernel DDI. Little Things Of course all the big new features got documented, and some major efforts were put into refactoring and renovation, but there were also a lot of smaller things that got fixed as well in the nearly a year between the Solaris 11 and 11.1 doc releases - again too many to list here, but a random sampling of the ones I know about & found interesting or useful: The Privileges section of the DTrace Guide now gives users a pointer to find out how to set up DTrace privileges for non-global zones and what limitations are in place there. A new section on Recommended iSCSI Configuration Practices was added to the iSCSI configuration section when it moved into the SAN Configuration and Multipathing administration guide. The Managing System Power Services section contains an expanded explanation of the various tunables for power management in Solaris 11.1. The sample dcmd sources in /usr/demo/mdb were updated to include ::help output, so that developers like myself who follow the examples don't forget to include it (until a helpful code reviewer pointed it out while reviewing the mdb module changes for Xorg 1.12). The README file in that directory was updated to show the correct paths for installing both kernel & userspace modules, including the 64-bit variants.

Read the article

wuinstall doesn't work with winrs

- by wizard

I've been having issues with psexec so I've been migrating to use winrs (part of the winrm system). It's a very nice remoting tool which is proving to be more reliable then psexec. Wuinstall is used to install available windows updates. The two however don't play well together. I'm working on a verity of windows servers 2003, 2008 and 2008r2. Wuinstall behaves the same across all hosts and behaves as expected if executed locally by the same user. Command: winrs -r:server wuinstall /download Produces WUInstall.exe Version 1.1 Copyright by hs2n Informationstechnologie GmbH 2009 Visit: http://www.xeox.com, http://www.hs2n.at for new versions Searching for updates ... Criteria: IsInstalled=0 and Type='Software' Result Code: Succeeded 7 Updates found, listing all: Security Update for Windows Server 2008 R2 x64 Edition (KB2544893) Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2518869) Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows S erver 2008 R2 SP1 for x64-based Systems (KB2539635) Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows S erver 2008 R2 SP1 for x64-based Systems (KB2572077) Security Update for Windows Server 2008 R2 x64 Edition (KB2588516) Security Update for Windows Server 2008 R2 x64 Edition (KB2620704) Security Update for Windows Server 2008 R2 x64 Edition (KB2617657) Downloading updates ... Error occured: CreateUpdateDownloader failed! Result CODE: 0x80070005 Return code: 1 Googling "0x80070005" finds "unspecified error" which isn't helpful. Thoughts? Is there a better way?

Read the article

Cisco SR520w FE - WAN Port Stops Working

- by Mike Hanley

I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

Read the article

Solaris ldap Authentication

- by Tman

Iv been having a trouble trying to get my Solaris 10 server to authenticate against an eDir server.im managed to Set up my linux(RHeL,SLES) servers to authenticate against the ldap Server.which works fine. Here is my configuration Files. ldapclient list: NS_LDAP_FILE_VERSION= 2.0 NS_LDAP_BINDDN= cn=proxyuser,o=AEDev NS_LDAP_BINDPASSWD= {NS1}ecfa88f3a945c22222233 NS_LDAP_SERVERS= 192.168.0.19 NS_LDAP_SEARCH_BASEDN= ou=auth,o=AEDev NS_LDAP_AUTH= simple NS_LDAP_SEARCH_SCOPE= sub NS_LDAP_CACHETTL= 0 NS_LDAP_CREDENTIAL_LEVEL= anonymous NS_LDAP_SERVICE_SEARCH_DESC= group:ou=Groups,ou=auth,o=AEDev NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=users,ou=auth,o=AEDev?sub?objectClass=shadowAccount NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=auth,o=AEDev?sub?objectClass=posixAccount NS_LDAP_BIND_TIME= 10 NS_LDAP_SERVICE_AUTH_METHOD= pam_ldap:simple getent passwd works fine: root:x:0:0:Super-User:/:/sbin/sh daemon:x:1:1::/: bin:x:2:2::/usr/bin: sys:x:3:3::/: adm:x:4:4:Admin:/var/adm: lp:x:71:8:Line Printer Admin:/usr/spool/lp: uucp:x:5:5:uucp Admin:/usr/lib/uucp: nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico smmsp:x:25:25:SendMail Message Submission Program:/: listen:x:37:4:Network Admin:/usr/net/nls: gdm:x:50:50:GDM Reserved UID:/: webservd:x:80:80:WebServer Reserved UID:/: postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh svctag:x:95:12:Service Tag UID:/: nobody:x:60001:60001:NFS Anonymous Access User:/: noaccess:x:60002:60002:No Access User:/: nobody4:x:65534:65534:SunOS 4.x NFS Anonymous Access User:/: tlla:x:2012:100::/home/tlla: test:x:2011:100::/home/test: thato:x:2010:100::/home/thato: pam.conf login auth sufficient pam_unix_auth.so.1 #server_policy login auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass login auth required pam_dial_auth.so.1 rlogin auth sufficient pam_rhosts_auth.so.1 rlogin auth requisite pam_authtok_get.so.1 rlogin auth required pam_dhkeys.so.1 rlogin auth required pam_unix_cred.so.1 rlogin auth sufficient pam_unix_auth.so.1 rlogin auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass rsh auth sufficient pam_rhosts_auth.so.1 rsh auth required pam_unix_cred.so.1 rsh auth sufficient pam_unix_auth.so.1 #server_policy rsh auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other auth requisite pam_authtok_get.so.1 other auth required pam_dhkeys.so.1 other auth required pam_unix_cred.so.1 other auth sufficient pam_unix_auth.so.1 other auth sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass passwd auth required pam_passwd_auth.so.1 passwd auth sufficient pam_unix_auth.so.1 ssh account sufficient pam_unix.so.1 ssh account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other account requisite pam_roles.so.1 other account sufficient pam_unix_account.so.1 other account sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass other password required pam_dhkeys.so.1 other password requisite pam_authtok_get.so.1 other password requisite pam_authtok_check.so.1 other password required pam_authtok_store.so.1 other password sufficient pam_unix.so.1 other password sufficient /usr/lib/security/pam_ldap.so.1 try_first_pass Local Authentication Works But LDAP Authentication Doesn't Work.

Read the article

Terminal Server 2008 Login: Access Denied

- by user1236435

When I try to RDP into a Server 2008 Terminal Server, I get a message that says "Access Denied" and an OK button. I setup the licensing mode correctly (per user) and also have setup to allow all remote connections. I get the following in the security event log: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 28/06/2012 12:01:16 Event ID: 4656 Task Category: File System Level: Information Keywords: Audit Failure User: N/A Computer: 0BraApps1.brenntagLA.hou Description: A handle to an object was requested. Subject: Security ID: BRENNTAGLA\jaadmin Account Name: jaadmin Account Domain: BRENNTAGLA Logon ID: 0xbbe3f Object: Object Server: Security Object Type: File Object Name: C:\Windows\System32\ServerManager.msc Handle ID: 0x0 Process Information: Process ID: 0x60c Process Name: C:\Windows\System32\mmc.exe Access Request Information: Transaction ID: {00000000-0000-0000-0000-000000000000} Accesses: READ_CONTROL SYNCHRONIZE WriteData (or AddFile) AppendData (or AddSubdirectory or CreatePipeInstance) WriteEA ReadAttributes WriteAttributes Access Reasons: READ_CONTROL: Granted by D:(A;;0x1200a9;;;BA) SYNCHRONIZE: Granted by D:(A;;0x1200a9;;;BA) WriteData (or AddFile): Not granted AppendData (or AddSubdirectory or CreatePipeInstance): Not granted WriteEA: Not granted ReadAttributes: Granted by ACE on parent folder D:(A;;0x1301bf;;;BA) WriteAttributes: Not granted Access Mask: 0x120196 Privileges Used for Access Check: - Restricted SID Count: 0 Event Xml: 4656 1 0 12800 0 0x8010000000000000 1535565 Security 0BraApps1.brenntagLA.hou S-1-5-21-205301047-3902605089-2438454170-21511219 jaadmin BRENNTAGLA 0xbbe3f Security File C:\Windows\System32\ServerManager.msc 0x0 {00000000-0000-0000-0000-000000000000} %%1538 %%1541 %%4417 %%4418 %%4420 %%4423 %%4424 %%1538: %%1801 D:(A;;0x1200a9;;;BA) %%1541: %%1801 D:(A;;0x1200a9;;;BA) %%4417: %%1805 %%4418: %%1805 %%4420: %%1805 %%4423: %%1811 D:(A;;0x1301bf;;;BA) %%4424: %%1805 0x120196 - 0 0x60c C:\Windows\System32\mmc.exe Any ideas?

Read the article

Exception during secure communication implementation

- by Liran

hi everyone. im trying to implement simple secured client server communiction using WCF. when im launching mt server everty thing is OK , But when im launching my client im getting this error: Error : An error occurred while making the HTTP request to https://localhost:800 0/ExchangeService. This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caus ed by a mismatch of the security binding between the client and the server. this is the server code : Uri address = new Uri("https://localhost:8000/ExchangeService"); WSHttpBinding binding = new WSHttpBinding(); //Set Binding Params binding.Security.Mode = SecurityMode.Transport; binding.Security.Transport.ClientCredentialType = HttpClientCredentialType.None; binding.Security.Transport.ProxyCredentialType = HttpProxyCredentialType.None; Type contract = typeof(ExchangeService.ServiceContract.ITradeService); ServiceHost host = new ServiceHost(typeof(TradeService)); host.AddServiceEndpoint(contract, binding, address); host.Open(); this is the client configuration (app.config): </client> <bindings> <wsHttpBinding> <binding name="TradeWsHttpBinding"> <security mode="Transport"> <transport clientCredentialType="None" proxyCredentialType ="None"/> </security> </binding> </wsHttpBinding> </bindings> the security configuration at both the client and the server are the same , and i dont need certificate for the server in that kind of security (transport) so why do i get this exception ???? thanks...

Read the article

Audio in xCode4.x is producing console warnings

- by David DelMonte

While the app works, I am seeing pages of console log warnings when I'm running my app on the simulator. Even Apple's "LoadPresetDemo" sample app produces the same warning messages. I don't want to reproduce them all here (about 500 lines), but here are few. I would appreciate any insight into what's going on... Expected in: /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk/System/Library/Frameworks/CoreFoundation.framework/CoreFoundation in /System/Library/Frameworks/Security.framework/Versions/A/Security 2011-11-30 17:43:00.098 appname[4175:16c03] Error loading /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bundle/Contents/MacOS/AppleHDAHALPlugIn: dlopen(/System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bundle/Contents/MacOS/AppleHDAHALPlugIn, 262): Symbol not found: ___CFObjCIsCollectable Referenced from: /System/Library/Frameworks/Security.framework/Versions/A/Security ... Referenced from: /System/Library/Frameworks/Security.framework/Versions/A/Security Expected in: /Developer/Platforms/iPhoneSimulator.platform/Developer/SDKs/iPhoneSimulator5.0.sdk/System/Library/Frameworks/CoreFoundation.framework/CoreFoundation in /System/Library/Frameworks/Security.framework/Versions/A/Security 2011-11-30 17:43:00.245 appname[4175:16c03] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x7b6b0780 (bundle, not loaded) 2011-11-30 17:43:00.255 appname[4175:16c03] Error loading /Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/MacOS/iSightAudio: dlopen(/Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/MacOS/iSightAudio, 262): Symbol not found: ___CFObjCIsCollectable

Read the article

How can I get the user object from a service in Symfony2

- by pogo

My site is using a third party service for authentication as well as other bits of functionality so I have setup a service that does all the API calls for me and it's this service that I need to be able to access the user object. I've tried injecting the security.context service into my API service but I get a ServiceCircularReferenceException because my user authentication provider references the API service (it has to in order to authenticate the user). So I get a chain of security.context -> authentication provider -> user provider -> API service -> security.context I'm struggling to this of another way of getting the user object and I can't see any obvious way of splitting up this chain. My configs are all defined in config.yml, here are the relevant bits myapp.database: class: Pogo\MyAppBundle\Service\DatabaseService arguments: siteid: %siteid% entityManager: "@doctrine.orm.entity_manager" myapp.apiservice: class: Pogo\MyAppBundle\Service\TicketingService arguments: entityManager: "@myapp.database" myapp.user_provider: class: Pogo\MyAppBundle\Service\APIUserProvider arguments: entityManager: "@myapp.database" ticketingAdapter: "@myapp.apiservice" securityContext: "@security.context" myapp.authenticationprovider: class: Pogo\MyAppBundle\Service\APIAuthenticationProvider arguments: userChecker: "@security.user_checker" encoderFactory: "@security.encoder_factory" userProvider: "@myapp.user_provider" myapp.user_provider is the service that I've defined as my user provider service in security.yml which I presume is how it's being referenced by security.context

Read the article

makecert gives "Fail to acquire a security provider from the issuer's certificate" - why?

- by mark

Dear ladies and sirs. Observe this simple batch file: makecert -n "CN=MyCA" -sr localmachine -ss root -a sha1 -cy authority -r -sv MyCA.pvk MyCA.cer del MyCA.pvk del MyCA.cer makecert -n "CN=il-mark-lt" -sr localmachine -ss my -cy end -pe -sky exchange -a sha1 -is root -ir localmachine -in MyCA However, the last makecert fails with the following error message: Error: Fail to acquire a security provider from the issuer's certificate How do I troubleshoot it? Any ideas? BTW, the first makecert succeeds. Of course, I delete it again, before running the commands again. Thanks. EDIT1 I understood the reasons for the failure. The second command expects the file MyCA.pvk to exist, but I do not want to keep it around. So, what can I do?

Read the article

How to use CFUUID, can CFUUID be traced back to a unique individual. security/privacy

- by Kevin

Hi, i an new to iphone Dev and the concept of CFUUID, so thought i should ask, before i start implementing it. so the string returned by CFUUID is it really unique or can it be traced back to a unique individual. meaning lets say, i generate a CFUUID object and convert it to string(using the methods provided) , and then this info is used in my app or stored on a server database. and how unique is it, i mean is their a chance it can be similar to one generated on some other device. is it a good idea to use this info freely or are their some security/privacy aspects that i am not thinking about here. any help is greatly appreciated thanks

Read the article

CFMX6.1 deplying on Websphere 6.1 Server: Error 500: The Security service is not available.

- by ahiru

I am deploying a CFMX6.1 application to a Websphere 6.1 server. The server starts up without any errors but when I goto the CF Adminstrator page (or any cf page) I get the following error: Error 500: The Security service is not available. Can you deploy CFMX6.1 to WS6.1? My searches on the internets seem to say yes and no. As far as the error goes I normally end up at a page that lists the same error with stacktrace but no answers. Am I just searching using the wrong question? Thanks.

Read the article

Issue accessing remote Infinispan mbeans

- by user1960172

I am able to access the Mbeans by local Jconsole but not able to access the MBEANS from a remote Host. My COnfiguration: <?xml version='1.0' encoding='UTF-8'?> <server xmlns="urn:jboss:domain:1.4"> <extensions> <extension module="org.infinispan.server.endpoint"/> <extension module="org.jboss.as.clustering.infinispan"/> <extension module="org.jboss.as.clustering.jgroups"/> <extension module="org.jboss.as.connector"/> <extension module="org.jboss.as.jdr"/> <extension module="org.jboss.as.jmx"/> <extension module="org.jboss.as.logging"/> <extension module="org.jboss.as.modcluster"/> <extension module="org.jboss.as.naming"/> <extension module="org.jboss.as.remoting"/> <extension module="org.jboss.as.security"/> <extension module="org.jboss.as.threads"/> <extension module="org.jboss.as.transactions"/> <extension module="org.jboss.as.web"/> </extensions> <management> <security-realms> <security-realm name="ManagementRealm"> <authentication> <local default-user="$local"/> <properties path="mgmt-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> <security-realm name="ApplicationRealm"> <authentication> <local default-user="$local" allowed-users="*"/> <properties path="application-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> </security-realms> <management-interfaces> <native-interface security-realm="ManagementRealm"> <socket-binding native="management-native"/> </native-interface> <http-interface security-realm="ManagementRealm"> <socket-binding http="management-http"/> </http-interface> </management-interfaces> </management> <profile> <subsystem xmlns="urn:jboss:domain:logging:1.2"> <console-handler name="CONSOLE"> <level name="INFO"/> <formatter> <pattern-formatter pattern="%K{level}%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> </console-handler> <periodic-rotating-file-handler name="FILE" autoflush="true"> <formatter> <pattern-formatter pattern="%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> <file relative-to="jboss.server.log.dir" path="server.log"/> <suffix value=".yyyy-MM-dd"/> <append value="true"/> </periodic-rotating-file-handler> <logger category="com.arjuna"> <level name="WARN"/> </logger> <logger category="org.apache.tomcat.util.modeler"> <level name="WARN"/> </logger> <logger category="org.jboss.as.config"> <level name="DEBUG"/> </logger> <logger category="sun.rmi"> <level name="WARN"/> </logger> <logger category="jacorb"> <level name="WARN"/> </logger> <logger category="jacorb.config"> <level name="ERROR"/> </logger> <root-logger> <level name="INFO"/> <handlers> <handler name="CONSOLE"/> <handler name="FILE"/> </handlers> </root-logger> </subsystem> <subsystem xmlns="urn:infinispan:server:endpoint:6.0"> <hotrod-connector socket-binding="hotrod" cache-container="clustered"> <topology-state-transfer lazy-retrieval="false" lock-timeout="1000" replication-timeout="5000"/> </hotrod-connector> <memcached-connector socket-binding="memcached" cache-container="clustered"/>  <rest-connector virtual-server="default-host" cache-container="clustered" /> <websocket-connector socket-binding="websocket" cache-container="clustered"/> </subsystem> <subsystem xmlns="urn:jboss:domain:datasources:1.1"> <datasources/> </subsystem> <subsystem xmlns="urn:infinispan:server:core:5.3" default-cache-container="clustered"> <cache-container name="clustered" default-cache="default"> <transport executor="infinispan-transport" lock-timeout="60000"/> <distributed-cache name="default" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="memcachedCache" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="namedCache" mode="SYNC" start="EAGER"/> </cache-container> <cache-container name="security"/> </subsystem> <subsystem xmlns="urn:jboss:domain:jca:1.1"> <archive-validation enabled="true" fail-on-error="true" fail-on-warn="false"/> <bean-validation enabled="true"/> <default-workmanager> <short-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </short-running-threads> <long-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </long-running-threads> </default-workmanager> <cached-connection-manager/> </subsystem> <subsystem xmlns="urn:jboss:domain:jdr:1.0"/> <subsystem xmlns="urn:jboss:domain:jgroups:1.2" default-stack="${jboss.default.jgroups.stack:udp}"> <stack name="udp"> <transport type="UDP" socket-binding="jgroups-udp"/> <protocol type="PING"/> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-udp-fd"/> <protocol type="FD_ALL"/> <protocol type="pbcast.NAKACK"/> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> <stack name="tcp"> <transport type="TCP" socket-binding="jgroups-tcp"/>  <protocol type="TCPPING"> <property name="initial_hosts">10.32.50.53[7600],10.32.50.64[7600]</property> </protocol> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-tcp-fd"/> <protocol type="FD"/> <protocol type="VERIFY_SUSPECT"/> <protocol type="pbcast.NAKACK"> <property name="use_mcast_xmit">false</property> </protocol> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> </subsystem> <subsystem xmlns="urn:jboss:domain:jmx:1.1"> <show-model value="true"/> <remoting-connector use-management-endpoint="false"/> </subsystem> <subsystem xmlns="urn:jboss:domain:modcluster:1.1"> <mod-cluster-config advertise-socket="modcluster" connector="ajp" excluded-contexts="console"> <dynamic-load-provider> <load-metric type="busyness"/> </dynamic-load-provider> </mod-cluster-config> </subsystem> <subsystem xmlns="urn:jboss:domain:naming:1.2"/> <subsystem xmlns="urn:jboss:domain:remoting:1.1"> <connector name="remoting-connector" socket-binding="remoting" security-realm="ApplicationRealm"/> </subsystem> <subsystem xmlns="urn:jboss:domain:security:1.2"> <security-domains> <security-domain name="other" cache-type="infinispan"> <authentication> <login-module code="Remoting" flag="optional"> <module-option name="password-stacking" value="useFirstPass"/> </login-module> <login-module code="RealmUsersRoles" flag="required"> <module-option name="usersProperties" value="${jboss.server.config.dir}/application-users.properties"/> <module-option name="rolesProperties" value="${jboss.server.config.dir}/application-roles.properties"/> <module-option name="realm" value="ApplicationRealm"/> <module-option name="password-stacking" value="useFirstPass"/> </login-module> </authentication> </security-domain> <security-domain name="jboss-web-policy" cache-type="infinispan"> <authorization> <policy-module code="Delegating" flag="required"/> </authorization> </security-domain> </security-domains> </subsystem> <subsystem xmlns="urn:jboss:domain:threads:1.1"> <thread-factory name="infinispan-factory" group-name="infinispan" priority="5"/> <unbounded-queue-thread-pool name="infinispan-transport"> <max-threads count="25"/> <keepalive-time time="0" unit="milliseconds"/> <thread-factory name="infinispan-factory"/> </unbounded-queue-thread-pool> </subsystem> <subsystem xmlns="urn:jboss:domain:transactions:1.2"> <core-environment> <process-id> <uuid/> </process-id> </core-environment> <recovery-environment socket-binding="txn-recovery-environment" status-socket-binding="txn-status-manager"/> <coordinator-environment default-timeout="300"/> </subsystem> <subsystem xmlns="urn:jboss:domain:web:1.1" default-virtual-server="default-host" native="false"> <connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/> <connector name="ajp" protocol="AJP/1.3" scheme="http" socket-binding="ajp"/> <virtual-server name="default-host" enable-welcome-root="false"> <alias name="localhost"/> <alias name="example.com"/> </virtual-server> </subsystem> </profile> <interfaces> <interface name="management"> <inet-address value="${jboss.bind.address.management:10.32.222.111}"/> </interface> <interface name="public"> <inet-address value="${jboss.bind.address:10.32.222.111}"/> </interface> </interfaces> <socket-binding-group name="standard-sockets" default-interface="public" port-offset="${jboss.socket.binding.port-offset:0}"> <socket-binding name="management-native" interface="management" port="${jboss.management.native.port:9999}"/> <socket-binding name="management-http" interface="management" port="${jboss.management.http.port:9990}"/> <socket-binding name="management-https" interface="management" port="${jboss.management.https.port:9443}"/> <socket-binding name="ajp" port="8089"/> <socket-binding name="hotrod" port="11222"/> <socket-binding name="http" port="8080"/> <socket-binding name="https" port="8443"/> <socket-binding name="jgroups-mping" port="0" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45700"/> <socket-binding name="jgroups-tcp" port="7600"/> <socket-binding name="jgroups-tcp-fd" port="57600"/> <socket-binding name="jgroups-udp" port="55200" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45688"/> <socket-binding name="jgroups-udp-fd" port="54200"/> <socket-binding name="memcached" port="11211"/> <socket-binding name="modcluster" port="0" multicast-address="224.0.1.115" multicast-port="23364"/> <socket-binding name="remoting" port="4447"/> <socket-binding name="txn-recovery-environment" port="4712"/> <socket-binding name="txn-status-manager" port="4713"/> <socket-binding name="websocket" port="8181"/> </socket-binding-group> </server> Remote Process: service:jmx:remoting-jmx://10.32.222.111:4447 I added user to both management and application realm admin=2a0923285184943425d1f53ddd58ec7a test=2b1be81e1da41d4ea647bd82fc8c2bc9 But when i try to connect its says's: Connection failed: Retry When i use Remote process as:10.32.222.111:4447 on the sever it prompts a warning : 16:29:48,084 ERROR [org.jboss.remoting.remote.connection] (Remoting "djd7w4r1" read-1) JBREM000200: Remote connection failed: java.io.IOException: Received an invali d message length of -2140864253 Also disabled Remote authentication: -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.port=12345 Still not able to connect. Any help will be highly appreciated . Thanks

Read the article

alternate way to read excel files without providing "network service" security.

- by Jebli

Hi, I am using a web application to read the excel file and uploading it in the database. I have deployed the application in the server.I am using windows service 2003 as the server.I am able to read the excel file only if i set the set the security settings to "network service" for the microsoft excel application in the control panel -- administrative tools -- componetn service -- computer -- My computer -- DCOM config -- microsoft excel application . Why is it so . There are also other applications running in the server. 1) Doing like this will create any issue ? 2) Why do we need to do it ? 3) Is there any alternative way to do it ? 4) What are we doing actually by providing network service access ? Please help

Read the article

Methods in the namespace System.Security.Cryptography take 2 minutes to perform when service is hosted in IIS

- by Asaf Saf

I built an ASP.NET web-service that uses the System.Security.Cryptography namespace when it handles its requests. When I hosted the service in ASP.NET Development Server, everything worked fine. Then I moved the service into IIS, still using localhost addresses, and surprisingly, each time the service calls a method from the specified namespace, it takes 2 minutes to complete! If a single request requires the service to call 3 methods of the specified namespace, then the request takes total of 6 minutes to complete! The traces show that the request has been received on time, and they show an interval of around 2 minutes upon each call to the specified namespace. Did anyone see this strange behavior elsewhere? Any speculation would be appreciated!

Read the article

How do you preform an EJB lookup with application security?

- by Hillgod

I'm trying to lookup an EJB from a standalone java application. I'm thinking in terms of WebSphere Application Server 6.1, but if someone knows how to do this for another application server, it may get me in the right direction. What I'm currently doing: initialContext= new InitialContext(env); initialContext.lookup(""); lc = new LoginContext("WSLogin", new WSCallbackHandlerImpl("wasadmin", "defaultWIMFileBasedRealm", "wasadmin")); lc.login(); subject = lc.getSubject(); WSSubject.setRunAsSubject(subject); This isn't working... my subject is still "/UNAUTHENTICATED", and I get an error when I try to lookup the EJB. I'm also specifying the following parameters to the VM when executing the application: -Dcom.ibm.CORBA.ConfigURL="C:\was\profiles\AppSrv01\properties\sas.client.props" -Djava.security.auth.login.config="C:\was\profiles\AppSrv01\properties\wsjaas_client.conf"

Read the article

Using user editable image URL in application. Security issues.

- by sharas

Hi there. I am writing an application where users are required to show their photo, however as my server resources are very limited I can not let them upload it to the server. So I have three major questions: 1. How to properly validate photo URL? At least I can validate with regexp, however I need to check for file ending: `validates_format_of :photo_url, :with => URI::regexp(%w(http https))` 2. Security issues? XSS? Even I validate the picture at the moment of creation, hacker can replace image with malicious stuff anytime. 3. Maybe there are free asset stores with API?

Read the article

Drupal: does removing these lines from .htaccess cause security issues ?

- by Patrick

hi, I had to comment these lines from the htaccess files in my main Drupal folder and in sites folder # Don't show directory listings for URLs which map to a directory. #Options -Indexes # Follow symbolic links in this directory. #Options +FollowSymLinks ...in order to not get a 500 Internal Error on the new server. Can I leave them uncommented or am I going to have security issues ? ps. I've also set all content in files folder 777 permission. Is this ok ? thanks

Read the article

Problems with Update Manager

- by user65965

Whenever I try to update with update manager I get the following errors: W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-updates/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-backports/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise-security/Release Unable to find expected entry 'commercial/source/Sources' in Release file (Wrong sources.list entry or malformed file) W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/source/Sources 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-amd64/Packages 404 Not Found W:Failed to fetch http://ppa.launchpad.net/iefremov/ppa/ubuntu/dists/precise/main/binary-i386/Packages 404 Not Found E:Some index files failed to download. They have been ignored, or old ones used instead. Any help would be much appreciated, thank you. Thank you very much Eliah. I'm still pretty new to Ubuntu. Here's the output I got from the terminal: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04 LTS Release: 12.04 Codename: precise # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise restricted main commercial multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-updates restricted main commercial multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial deb-src http://archive.ubuntu.com/ubuntu precise-backports main restricted universe multiverse commercial #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security main restricted commercial deb-src http://archive.ubuntu.com/ubuntu precise-security restricted main commercial multiverse universe #Added by software-properties deb http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu oneiric partner deb-src http://archive.canonical.com/ubuntu precise partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main ## This is a 3rd party script to install and update Oracle Java deb http://www.duinsoft.nl/pkg debs all ## Sun-Java6-JRE deb http://security.ubuntu.com/ubuntu hardy-security main multiverse ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/askubuntu-tools-ppa-precise.list.save: deb http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/askubuntu-tools/ppa/ubuntu precise main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu oneiric main ** /etc/apt/sources.list.d/effie-jayx-turpial-oneiric.list.save: deb http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/effie-jayx/turpial/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/getdeb.list.distUpgrade: deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps ** /etc/apt/sources.list.d/getdeb.list.save: # deb http://archive.getdeb.net/ubuntu oneiric-getdeb apps # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.distUpgrade: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu oneiric main ** /etc/apt/sources.list.d/hotot-team-ppa-oneiric.list.save: deb http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise deb-src http://ppa.launchpad.net/hotot-team/ppa/ubuntu precise main # disabled on upgrade to precise ** /etc/apt/sources.list.d/iefremov-ppa-precise.list: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/iefremov-ppa-precise.list.save: deb http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/iefremov/ppa/ubuntu precise main ** /etc/apt/sources.list.d/jockey.list: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/jockey.list.distUpgrade: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree ** /etc/apt/sources.list.d/jockey.list.save: deb http://www.openprinting.org/download/printdriver/debian/ lsb3.2 main-nonfree # disabled on upgrade to precise ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/plexydesk-plexydesk-dailybuild-precise.list.save: deb http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main deb-src http://ppa.launchpad.net/plexydesk/plexydesk-dailybuild/ubuntu precise main ** /etc/apt/sources.list.d/precise-partner.list: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/precise-partner.list.save: deb http://archive.canonical.com/ubuntu precise partner #Added by software-center ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list: # deb https://justin-dormandy:[email protected]/commercial-ppa-uploaders/crossover-pro/ubuntu precise main #Added by software-center disabled on upgrade to precise ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.distUpgrade: Permission denied ** /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: cat: /etc/apt/sources.list.d/private-ppa.launchpad.net_commercial-ppa-uploaders_crossover-pro_ubuntu.list.save: Permission denied ** /etc/apt/sources.list.d/screenlets-ppa-precise.list: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/screenlets-ppa-precise.list.save: deb http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main deb-src http://ppa.launchpad.net/screenlets/ppa/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main ** /etc/apt/sources.list.d/webupd8team-java-precise.list.save: deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main

Read the article

Package Dependencies Error in almost every install

- by Betaxpression

New to Ubuntu. In the other sofware sources i have "Debian 4.0 eth" officially supported "non-us.debian.org/"; etc ... "ppa.launcpad.net" and installing applications has stopped working. I think i first came across this problem after installing Blender 2.58 When using update manager it is prompting for a partial upgrade. Almost every software when trying to install showing the same error Package Dependencies Error or GPG PUB KEY missing, tried to fixing to them but no luck. Output to: sudo apt-get update && sudo apt-get upgrade (links disabled http:// -- http:/ as new user can't put more no. of hyperlinks) Ign http:/non-us.debian.org stable/non-US InRelease Ign http:/non-us.debian.org stable/non-US Release.gpg Ign http:/non-us.debian.org stable/non-US Release Ign http:/non-us.debian.org stable/non-US/contrib TranslationIndex Ign http:/non-us.debian.org stable/non-US/main TranslationIndex Ign http:/non-us.debian.org stable/non-US/non-free TranslationIndex Err http:/non-us.debian.org stable/non-US/main Sources 503 Service Unavailable Err http:/non-us.debian.org stable/non-US/contrib Sources 503 Service Unavailable Err http:/non-us.debian.org stable/non-US/non-free Sources 503 Service Unavailable Err http:/non-us.debian.org stable/non-US/main amd64 Packages 503 Service Unavailable Err http:/non-us.debian.org stable/non-US/contrib amd64 Packages 503 Service Unavailable Err http:/non-us.debian.org stable/non-US/non-free amd64 Packages 503 Service Unavailable Ign http:/non-us.debian.org stable/non-US/contrib Translation-en_IN Ign http:/non-us.debian.org stable/non-US/contrib Translation-en Ign http:/non-us.debian.org stable/non-US/main Translation-en_IN Ign http:/non-us.debian.org stable/non-US/main Translation-en Ign http:/non-us.debian.org stable/non-US/non-free Translation-en_IN Ign http:/non-us.debian.org stable/non-US/non-free Translation-en Ign http:/archive.ubuntu.com natty InRelease Ign http:/archive.canonical.com natty InRelease Ign http:/extras.ubuntu.com natty InRelease Ign http:/http.us.debian.org stable InRelease Ign http:/ftp.us.debian.org etch InRelease Ign http:/archive.ubuntu.com natty-updates InRelease Hit http:/archive.canonical.com natty Release.gpg Get:1 http:/extras.ubuntu.com natty Release.gpg [72 B] Ign http:/ppa.launchpad.net natty InRelease Get:2 http:/http.us.debian.org stable Release.gpg [1,672 B] Ign http:/linux.dropbox.com natty InRelease Ign http:/ftp.us.debian.org etch Release.gpg Ign http:/archive.ubuntu.com natty-security InRelease Hit http:/archive.canonical.com natty Release Hit http:/extras.ubuntu.com natty Release Ign http:/ppa.launchpad.net natty InRelease Get:3 http:/linux.dropbox.com natty Release.gpg [489 B] Ign http:/ftp.us.debian.org etch Release Ign http:/dl.google.com stable InRelease Get:4 http:/archive.ubuntu.com natty Release.gpg [198 B] Ign http:/ppa.launchpad.net natty InRelease Hit http:/archive.canonical.com natty/partner Sources Hit http:/extras.ubuntu.com natty/main Sources Get:5 http:/linux.dropbox.com natty Release [2,599 B] Get:6 http:/archive.ubuntu.com natty-updates Release.gpg [198 B] Ign http:/ppa.launchpad.net natty InRelease Hit http:/archive.canonical.com natty/partner amd64 Packages Hit http:/extras.ubuntu.com natty/main amd64 Packages Get:7 http:/linux.dropbox.com natty/main amd64 Packages [784 B] Get:8 http:/archive.ubuntu.com natty-security Release.gpg [198 B] Ign http:/ppa.launchpad.net natty InRelease Ign http:/archive.canonical.com natty/partner TranslationIndex Ign http:/extras.ubuntu.com natty/main TranslationIndex Get:9 http:/http.us.debian.org stable Release [104 kB] Ign http:/linux.dropbox.com natty/main TranslationIndex Hit http:/archive.ubuntu.com natty Release Ign http:/ppa.launchpad.net natty InRelease Ign http:/http.us.debian.org stable Release Hit http:/archive.ubuntu.com natty-updates Release Get:10 http:/ppa.launchpad.net natty InRelease [316 B] Ign http:/ppa.launchpad.net natty InRelease Hit http:/archive.ubuntu.com natty-security Release Get:11 http:/ppa.launchpad.net natty InRelease [316 B] Ign http:/ppa.launchpad.net natty InRelease Hit http:/archive.ubuntu.com natty/restricted Sources Get:12 http:/ppa.launchpad.net natty Release.gpg [316 B] Ign http:/http.us.debian.org stable/main Sources/DiffIndex Get:13 http:/ppa.launchpad.net natty Release.gpg [316 B] Hit http:/archive.ubuntu.com natty/main Sources Ign http:/ftp.us.debian.org etch/contrib TranslationIndex Ign http:/http.us.debian.org stable/contrib Sources/DiffIndex Get:14 http:/ppa.launchpad.net natty Release.gpg [1,502 B] Ign http:/http.us.debian.org stable/non-free Sources/DiffIndex Ign http:/ftp.us.debian.org etch/main TranslationIndex Get:15 http:/ppa.launchpad.net natty Release.gpg [1,928 B] Ign http:/http.us.debian.org stable/main amd64 Packages/DiffIndex Ign http:/ftp.us.debian.org etch/non-free TranslationIndex Ign http:/ppa.launchpad.net natty Release.gpg Hit http:/http.us.debian.org stable/contrib amd64 Packages/DiffIndex W: GPG error: http:/http.us.debian.org stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY AED4B06F473041FA NO_PUBKEY 64481591B98321F9 W: GPG error: http:/ppa.launchpad.net natty InRelease: File /var/lib/apt/lists/partial/ppa.launchpad.net_sunab_kdenlive-release_ubuntu_dists_natty_InRelease doesn't start with a clearsigned message W: GPG error: http:/ppa.launchpad.net natty InRelease: File /var/lib/apt/lists/partial/ppa.launchpad.net_ubuntu-wine_ppa_ubuntu_dists_natty_InRelease doesn't start with a clearsigned message E: Could not open file /var/lib/apt/lists/http.us.debian.org_debian_dists_stable_contrib_binary-amd64_Packages.IndexDiff - open (2: No such file or directory) output to: sudo cat /etc/apt/sources.list # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release amd64 (20110427.1)]/ natty main restricted # See http:/help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http:/archive.ubuntu.com/ubuntu natty main restricted deb-src http:/archive.ubuntu.com/ubuntu natty restricted main multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http:/archive.ubuntu.com/ubuntu natty-updates main restricted deb-src http:/archive.ubuntu.com/ubuntu natty-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http:/archive.ubuntu.com/ubuntu natty universe deb http:/archive.ubuntu.com/ubuntu natty-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http:/archive.ubuntu.com/ubuntu natty multiverse deb http:/archive.ubuntu.com/ubuntu natty-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http:/us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse # deb-src http:/us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse deb http:/archive.ubuntu.com/ubuntu natty-security main restricted deb-src http:/archive.ubuntu.com/ubuntu natty-security restricted main multiverse universe #Added by software-properties deb http:/archive.ubuntu.com/ubuntu natty-security universe deb http:/archive.ubuntu.com/ubuntu natty-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http:/archive.canonical.com/ubuntu natty partner deb-src http:/archive.canonical.com/ubuntu natty partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http:/extras.ubuntu.com/ubuntu natty main deb-src http:/extras.ubuntu.com/ubuntu natty main deb http:/ftp.us.debian.org/debian/ etch main contrib non-free deb-src http:/ftp.us.debian.org/debian/ etch main contrib non-free deb http:/http.us.debian.org/debian stable main contrib non-free deb-src http:/http.us.debian.org/debian stable main contrib non-free deb http:/non-us.debian.org/debian-non-US stable/non-US main contrib non-free deb-src http:/non-us.debian.org/debian-non-US stable/non-US main contrib non-free Thanks But after removing Debian repositories still getting this error: W:GPG error: http://ppa.launchpad.net natty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9BDB3D89CE49EC21, W:GPG error: http://ppa.launchpad.net natty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 80E7349A06ED541C, W:GPG error: http://ppa.launchpad.net natty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8C851674F96FD737, W:GPG error: http://ppa.launchpad.net natty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 94E58C34A8670E8C, E:Unable to parse package file /var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_natty-updates_multiverse_i18n_Index (1) I actually tried this before, but i am always getting this error --Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv-keys 8C851674F96FD737 gpg: requesting key F96FD737 from hkp server keyserver.ubuntu.com ?: keyserver.ubuntu.com: Connection refused gpgkeys: HTTP fetch error 7: couldn't connect: Connection refused gpg: no valid OpenPGP data found. gpg: Total number processed: 0

Read the article

Partner Blog Series: PwC Perspectives Part 2 - Jumpstarting your IAM program with R2

- by Tanu Sood

Identity and access management (IAM) isn’t a new concept. Over the past decade, companies have begun to address identity management through a variety of solutions that have primarily focused on provisioning. . The new age workforce is converging at a rapid pace with ever increasing demand to use diverse portfolio of applications and systems to interact and interface with their peers in the industry and customers alike. Oracle has taken a significant leap with their release of Identity and Access Management 11gR2 towards enabling this global workforce to conduct their business in a secure, efficient and effective manner. As companies deal with IAM business drivers, it becomes immediately apparent that holistic, rather than piecemeal, approaches better address their needs. When planning an enterprise-wide IAM solution, the first step is to create a common framework that serves as the foundation on which to build the cost, compliance and business process efficiencies. As a leading industry practice, IAM should be established on a foundation of accurate data for identity management, making this data available in a uniform manner to downstream applications and processes. Mature organizations are looking beyond IAM’s basic benefits to harness more advanced capabilities in user lifecycle management. For any organization looking to embark on an IAM initiative, consider the following use cases in managing and administering user access. Expanding the Enterprise Provisioning Footprint Almost all organizations have some helpdesk resources tied up in handling access requests from users, a distraction from their core job of handling problem tickets. This dependency has mushroomed from the traditional acceptance of provisioning solutions integrating and addressing only a portion of applications in the heterogeneous landscape Oracle Identity Manager (OIM) 11gR2 solves this problem by offering integration with third party ticketing systems as “disconnected applications”. It allows for the existing business processes to be seamlessly integrated into the system and tracked throughout its lifecycle. With minimal effort and analysis, an organization can begin integrating OIM with groups or applications that are involved with manually intensive access provisioning and de-provisioning activities. This aspect of OIM allows organizations to on-board applications and associated business processes quickly using out of box templates and frameworks. This is especially important for organizations looking to fold in users and resources from mergers and acquisitions. Simplifying Access Requests Organizations looking to implement access request solutions often find it challenging to get their users to accept and adopt the new processes.. So, how do we improve the user experience, make it intuitive and personalized and yet simplify the user access process? With R2, OIM helps organizations alleviate the challenge by placing the most used functionality front and centre in the new user request interface. Roles, application accounts, and entitlements can all be found in the same interface as catalog items, giving business users a single location to go to whenever they need to initiate, approve or track a request. Furthermore, if a particular item is not relevant to a user’s job function or area inside the organization, it can be hidden so as to not overwhelm or confuse the user with superfluous options. The ability to customize the user interface to suit your needs helps in exercising the business rules effectively and avoiding access proliferation within the organization. Saving Time with Templates A typical use case that is most beneficial to business users is flexibility to place, edit, and withdraw requests based on changing circumstances and business needs. With OIM R2, multiple catalog items can now be added and removed from the shopping cart, an ecommerce paradigm that many users are already familiar with. This feature can be especially useful when setting up a large number of new employees or granting existing department or group access to a newly integrated application. Additionally, users can create their own shopping cart templates in order to complete subsequent requests more quickly. This feature saves the user from having to search for and select items all over again if a request is similar to a previous one. Advanced Delegated Administration A key feature of any provisioning solution should be to empower each business unit in managing their own access requests. By bringing administration closer to the user, you improve user productivity, enable efficiency and alleviate the administration overhead. To do so requires a federated services model so that the business units capable of shouldering the onus of user life cycle management of their business users can be enabled to do so. OIM 11gR2 offers advanced administrative options for creating, managing and controlling business logic and workflows through easy to use administrative interface and tools that can be exposed to delegated business administrators. For example, these business administrators can establish or modify how certain requests and operations should be handled within their business unit based on a number of attributes ranging from the type of request or the risk level of the individual items requested. Closed-Loop Remediation Security continues to be a major concern for most organizations. Identity management solutions bolster security by ensuring only the right users have the right access to the right resources. To prevent unauthorized access and where it already exists, the ability to detect and remediate it, are key requirements of an enterprise-grade proven solution. But the challenge with most solutions today is that some of this information still exists in silos. And when changes are made to systems directly, not all information is captured. With R2, oracle is offering a comprehensive Identity Governance solution that our customer organizations are leveraging for closed loop remediation that allows for an automated way for administrators to revoke unauthorized access. The change is automatically captured and the action noted for continued management. Conclusion While implementing provisioning solutions, it is important to keep the near term and the long term goals in mind. The provisioning solution should always be a part of a larger security and identity management program but with the ability to seamlessly integrate not only with the company’s infrastructure but also have the ability to leverage the information, business models compiled and used by the other identity management solutions. This allows organizations to reduce the cost of ownership, close security gaps and leverage the existing infrastructure. And having done so a multiple clients’ sites, this is the approach we recommend. In our next post, we will take a journey through our experiences of advising clients looking to upgrade to R2 from a previous version or migrating from a different solution. Meet the Writers: Praveen Krishna is a Manager in the Advisory Security practice within PwC. Over the last decade Praveen has helped clients plan, architect and implement Oracle identity solutions across diverse industries. His experience includes delivering security across diverse topics like network, infrastructure, application and data where he brings a holistic point of view to problem solving. Dharma Padala is a Director in the Advisory Security practice within PwC. He has been implementing medium to large scale Identity Management solutions across multiple industries including utility, health care, entertainment, retail and financial sectors. Dharma has 14 years of experience in delivering IT solutions out of which he has been implementing Identity Management solutions for the past 8 years. Scott MacDonald is a Director in the Advisory Security practice within PwC. He has consulted for several clients across multiple industries including financial services, health care, automotive and retail. Scott has 10 years of experience in delivering Identity Management solutions. John Misczak is a member of the Advisory Security practice within PwC. He has experience implementing multiple Identity and Access Management solutions, specializing in Oracle Identity Manager and Business Process Engineering Language (BPEL). Jenny (Xiao) Zhang is a member of the Advisory Security practice within PwC. She has consulted across multiple industries including financial services, entertainment and retail. Jenny has three years of experience in delivering IT solutions out of which she has been implementing Identity Management solutions for the past one and a half years.

Read the article

The broken Promise of the Mobile Web

- by Rick Strahl

High end mobile devices have been with us now for almost 7 years and they have utterly transformed the way we access information. Mobile phones and smartphones that have access to the Internet and host smart applications are in the hands of a large percentage of the population of the world. In many places even very remote, cell phones and even smart phones are a common sight. I’ll never forget when I was in India in 2011 I was up in the Southern Indian mountains riding an elephant out of a tiny local village, with an elephant herder in front riding atop of the elephant in front of us. He was dressed in traditional garb with the loin wrap and head cloth/turban as did quite a few of the locals in this small out of the way and not so touristy village. So we’re slowly trundling along in the forest and he’s lazily using his stick to guide the elephant and… 10 minutes in he pulls out his cell phone from his sash and starts texting. In the middle of texting a huge pig jumps out from the side of the trail and he takes a picture running across our path in the jungle! So yeah, mobile technology is very pervasive and it’s reached into even very buried and unexpected parts of this world. Apps are still King Apps currently rule the roost when it comes to mobile devices and the applications that run on them. If there’s something that you need on your mobile device your first step usually is to look for an app, not use your browser. But native app development remains a pain in the butt, with the requirement to have to support 2 or 3 completely separate platforms. There are solutions that try to bridge that gap. Xamarin is on a tear at the moment, providing their cross-device toolkit to build applications using C#. While Xamarin tools are impressive – and also *very* expensive – they only address part of the development madness that is app development. There are still specific device integration isssues, dealing with the different developer programs, security and certificate setups and all that other noise that surrounds app development. There’s also PhoneGap/Cordova which provides a hybrid solution that involves creating local HTML/CSS/JavaScript based applications, and then packaging them to run in a specialized App container that can run on most mobile device platforms using a WebView interface. This allows for using of HTML technology, but it also still requires all the set up, configuration of APIs, security keys and certification and submission and deployment process just like native applications – you actually lose many of the benefits that Web based apps bring. The big selling point of Cordova is that you get to use HTML have the ability to build your UI once for all platforms and run across all of them – but the rest of the app process remains in place. Apps can be a big pain to create and manage especially when we are talking about specialized or vertical business applications that aren’t geared at the mainstream market and that don’t fit the ‘store’ model. If you’re building a small intra department application you don’t want to deal with multiple device platforms and certification etc. for various public or corporate app stores. That model is simply not a good fit both from the development and deployment perspective. Even for commercial, big ticket apps, HTML as a UI platform offers many advantages over native, from write-once run-anywhere, to remote maintenance, single point of management and failure to having full control over the application as opposed to have the app store overloads censor you. In a lot of ways Web based HTML/CSS/JavaScript applications have so much potential for building better solutions based on existing Web technologies for the very same reasons a lot of content years ago moved off the desktop to the Web. To me the Web as a mobile platform makes perfect sense, but the reality of today’s Mobile Web unfortunately looks a little different… Where’s the Love for the Mobile Web? Yet here we are in the middle of 2014, nearly 7 years after the first iPhone was released and brought the promise of rich interactive information at your fingertips, and yet we still don’t really have a solid mobile Web platform. I know what you’re thinking: “But we have lots of HTML/JavaScript/CSS features that allows us to build nice mobile interfaces”. I agree to a point – it’s actually quite possible to build nice looking, rich and capable Web UI today. We have media queries to deal with varied display sizes, CSS transforms for smooth animations and transitions, tons of CSS improvements in CSS 3 that facilitate rich layout, a host of APIs geared towards mobile device features and lately even a number of JavaScript framework choices that facilitate development of multi-screen apps in a consistent manner. Personally I’ve been working a lot with AngularJs and heavily modified Bootstrap themes to build mobile first UIs and that’s been working very well to provide highly usable and attractive UI for typical mobile business applications. From the pure UI perspective things actually look very good. Not just about the UI But it’s not just about the UI - it’s also about integration with the mobile device. When it comes to putting all those pieces together into what amounts to a consolidated platform to build mobile Web applications, I think we still have a ways to go… there are a lot of missing pieces to make it all work together and integrate with the device more smoothly, and more importantly to make it work uniformly across the majority of devices. I think there are a number of reasons for this. Slow Standards Adoption HTML standards implementations and ratification has been dreadfully slow, and browser vendors all seem to pick and choose different pieces of the technology they implement. The end result is that we have a capable UI platform that’s missing some of the infrastructure pieces to make it whole on mobile devices. There’s lots of potential but what is lacking that final 10% to build truly compelling mobile applications that can compete favorably with native applications. Some of it is the fragmentation of browsers and the slow evolution of the mobile specific HTML APIs. A host of mobile standards exist but many of the standards are in the early review stage and they have been there stuck for long periods of time and seem to move at a glacial pace. Browser vendors seem even slower to implement them, and for good reason – non-ratified standards mean that implementations may change and vendor implementations tend to be experimental and likely have to be changed later. Neither Vendors or developers are not keen on changing standards. This is the typical chicken and egg scenario, but without some forward momentum from some party we end up stuck in the mud. It seems that either the standards bodies or the vendors need to carry the torch forward and that doesn’t seem to be happening quickly enough. Mobile Device Integration just isn’t good enough Current standards are not far reaching enough to address a number of the use case scenarios necessary for many mobile applications. While not every application needs to have access to all mobile device features, almost every mobile application could benefit from some integration with other parts of the mobile device platform. Integration with GPS, phone, media, messaging, notifications, linking and contacts system are benefits that are unique to mobile applications and could be widely used, but are mostly (with the exception of GPS) inaccessible for Web based applications today. Unfortunately trying to do most of this today only with a mobile Web browser is a losing battle. Aside from PhoneGap/Cordova’s app centric model with its own custom API accessing mobile device features and the token exception of the GeoLocation API, most device integration features are not widely supported by the current crop of mobile browsers. For example there’s no usable messaging API that allows access to SMS or contacts from HTML. Even obvious components like the Media Capture API are only implemented partially by mobile devices. There are alternatives and workarounds for some of these interfaces by using browser specific code, but that’s might ugly and something that I thought we were trying to leave behind with newer browser standards. But it’s not quite working out that way. It’s utterly perplexing to me that mobile standards like Media Capture and Streams, Media Gallery Access, Responsive Images, Messaging API, Contacts Manager API have only minimal or no traction at all today. Keep in mind we’ve had mobile browsers for nearly 7 years now, and yet we still have to think about how to get access to an image from the image gallery or the camera on some devices? Heck Windows Phone IE Mobile just gained the ability to upload images recently in the Windows 8.1 Update – that’s feature that HTML has had for 20 years! These are simple concepts and common problems that should have been solved a long time ago. It’s extremely frustrating to see build 90% of a mobile Web app with relative ease and then hit a brick wall for the remaining 10%, which often can be show stoppers. The remaining 10% have to do with platform integration, browser differences and working around the limitations that browsers and ‘pinned’ applications impose on HTML applications. The maddening part is that these limitations seem arbitrary as they could easily work on all mobile platforms. For example, SMS has a URL Moniker interface that sort of works on Android, works badly with iOS (only works if the address is already in the contact list) and not at all on Windows Phone. There’s no reason this shouldn’t work universally using the same interface – after all all phones have supported SMS since before the year 2000! But, it doesn’t have to be this way Change can happen very quickly. Take the GeoLocation API for example. Geolocation has taken off at the very beginning of the mobile device era and today it works well, provides the necessary security (a big concern for many mobile APIs), and is supported by just about all major mobile and even desktop browsers today. It handles security concerns via prompts to avoid unwanted access which is a model that would work for most other device APIs in a similar fashion. One time approval and occasional re-approval if code changes or caches expire. Simple and only slightly intrusive. It all works well, even though GeoLocation actually has some physical limitations, such as representing the current location when no GPS device is present. Yet this is a solved problem, where other APIs that are conceptually much simpler to implement have failed to gain any traction at all. Technically none of these APIs should be a problem to implement, but it appears that the momentum is just not there. Inadequate Web Application Linking and Activation Another important piece of the puzzle missing is the integration of HTML based Web applications. Today HTML based applications are not first class citizens on mobile operating systems. When talking about HTML based content there’s a big difference between content and applications. Content is great for search engine discovery and plain browser usage. Content is usually accessed intermittently and permanent linking is not so critical for this type of content. But applications have different needs. Applications need to be started up quickly and must be easily switchable to support a multi-tasking user workflow. Therefore, it’s pretty crucial that mobile Web apps are integrated into the underlying mobile OS and work with the standard task management features. Unfortunately this integration is not as smooth as it should be. It starts with actually trying to find mobile Web applications, to ‘installing’ them onto a phone in an easily accessible manner in a prominent position. The experience of discovering a Mobile Web ‘App’ and making it sticky is by no means as easy or satisfying. Today the way you’d go about this is: Open the browser Search for a Web Site in the browser with your search engine of choice Hope that you find the right site Hope that you actually find a site that works for your mobile device Click on the link and run the app in a fully chrome’d browser instance (read tiny surface area) Pin the app to the home screen (with all the limitations outline above) Hope you pointed at the right URL when you pinned Even for you and me as developers, there are a few steps in there that are painful and annoying, but think about the average user. First figuring out how to search for a specific site or URL? And then pinning the app and hopefully from the right location? You’ve probably lost more than half of your audience at that point. This experience sucks. For developers too this process is painful since app developers can’t control the shortcut creation directly. This problem often gets solved by crazy coding schemes, with annoying pop-ups that try to get people to create shortcuts via fancy animations that are both annoying and add overhead to each and every application that implements this sort of thing differently. And that’s not the end of it - getting the link onto the home screen with an application icon varies quite a bit between browsers. Apple’s non-standard meta tags are prominent and they work with iOS and Android (only more recent versions), but not on Windows Phone. Windows Phone instead requires you to create an actual screen or rather a partial screen be captured for a shortcut in the tile manager. Who had that brilliant idea I wonder? Surprisingly Chrome on recent Android versions seems to actually get it right – icons use pngs, pinning is easy and pinned applications properly behave like standalone apps and retain the browser’s active page state and content. Each of the platforms has a different way to specify icons (WP doesn’t allow you to use an icon image at all), and the most widely used interface in use today is a bunch of Apple specific meta tags that other browsers choose to support. The question is: Why is there no standard implementation for installing shortcuts across mobile platforms using an official format rather than a proprietary one? Then there’s iOS and the crazy way it treats home screen linked URLs using a crazy hybrid format that is neither as capable as a Web app running in Safari nor a WebView hosted application. Moving off the Web ‘app’ link when switching to another app actually causes the browser and preview it to ‘blank out’ the Web application in the Task View (see screenshot on the right). Then, when the ‘app’ is reactivated it ends up completely restarting the browser with the original link. This is crazy behavior that you can’t easily work around. In some situations you might be able to store the application state and restore it using LocalStorage, but for many scenarios that involve complex data sources (like say Google Maps) that’s not a possibility. The only reason for this screwed up behavior I can think of is that it is deliberate to make Web apps a pain in the butt to use and forcing users trough the App Store/PhoneGap/Cordova route. App linking and management is a very basic problem – something that we essentially have solved in every desktop browser – yet on mobile devices where it arguably matters a lot more to have easy access to web content we have to jump through hoops to have even a remotely decent linking/activation experience across browsers. Where’s the Money? It’s not surprising that device home screen integration and Mobile Web support in general is in such dismal shape – the mobile OS vendors benefit financially from App store sales and have little to gain from Web based applications that bypass the App store and the cash cow that it presents. On top of that, platform specific vendor lock-in of both end users and developers who have invested in hardware, apps and consumables is something that mobile platform vendors actually aspire to. Web based interfaces that are cross-platform are the anti-thesis of that and so again it’s no surprise that the mobile Web is on a struggling path. But – that may be changing. More and more we’re seeing operations shifting to services that are subscription based or otherwise collect money for usage, and that may drive more progress into the Web direction in the end . Nothing like the almighty dollar to drive innovation forward. Do we need a Mobile Web App Store? As much as I dislike moderated experiences in today’s massive App Stores, they do at least provide one single place to look for apps for your device. I think we could really use some sort of registry, that could provide something akin to an app store for mobile Web apps, to make it easier to actually find mobile applications. This could take the form of a specialized search engine, or maybe a more formal store/registry like structure. Something like apt-get/chocolatey for Web apps. It could be curated and provide at least some feedback and reviews that might help with the integrity of applications. Coupled to that could be a native application on each platform that would allow searching and browsing of the registry and then also handle installation in the form of providing the home screen linking, plus maybe an initial security configuration that determines what features are allowed access to for the app. I’m not holding my breath. In order for this sort of thing to take off and gain widespread appeal, a lot of coordination would be required. And in order to get enough traction it would have to come from a well known entity – a mobile Web app store from a no name source is unlikely to gain high enough usage numbers to make a difference. In a way this would eliminate some of the freedom of the Web, but of course this would also be an optional search path in addition to the standard open Web search mechanisms to find and access content today. Security Security is a big deal, and one of the perceived reasons why so many IT professionals appear to be willing to go back to the walled garden of deployed apps is that Apps are perceived as safe due to the official review and curation of the App stores. Curated stores are supposed to protect you from malware, illegal and misleading content. It doesn’t always work out that way and all the major vendors have had issues with security and the review process at some time or another. Security is critical, but I also think that Web applications in general pose less of a security threat than native applications, by nature of the sandboxed browser and JavaScript environments. Web applications run externally completely and in the HTML and JavaScript sandboxes, with only a very few controlled APIs allowing access to device specific features. And as discussed earlier – security for any device interaction can be granted the same for mobile applications through a Web browser, as they can for native applications either via explicit policies loaded from the Web, or via prompting as GeoLocation does today. Security is important, but it’s certainly solvable problem for Web applications even those that need to access device hardware. Security shouldn’t be a reason for Web apps to be an equal player in mobile applications. Apps are winning, but haven’t we been here before? So now we’re finding ourselves back in an era of installed app, rather than Web based and managed apps. Only it’s even worse today than with Desktop applications, in that the apps are going through a gatekeeper that charges a toll and censors what you can and can’t do in your apps. Frankly it’s a mystery to me why anybody would buy into this model and why it’s lasted this long when we’ve already been through this process. It’s crazy… It’s really a shame that this regression is happening. We have the technology to make mobile Web apps much more prominent, but yet we’re basically held back by what seems little more than bureaucracy, partisan bickering and self interest of the major parties involved. Back in the day of the desktop it was Internet Explorer’s 98+% market shareholding back the Web from improvements for many years – now it’s the combined mobile OS market in control of the mobile browsers. If mobile Web apps were allowed to be treated the same as native apps with simple ways to install and run them consistently and persistently, that would go a long way to making mobile applications much more usable and seriously viable alternatives to native apps. But as it is mobile apps have a severe disadvantage in placement and operation. There are a few bright spots in all of this. Mozilla’s FireFoxOs is embracing the Web for it’s mobile OS by essentially building every app out of HTML and JavaScript based content. It supports both packaged and certified package modes (that can be put into the app store), and Open Web apps that are loaded and run completely off the Web and can also cache locally for offline operation using a manifest. Open Web apps are treated as full class citizens in FireFoxOS and run using the same mechanism as installed apps. Unfortunately FireFoxOs is getting a slow start with minimal device support and specifically targeting the low end market. We can hope that this approach will change and catch on with other vendors, but that’s also an uphill battle given the conflict of interest with platform lock in that it represents. Recent versions of Android also seem to be working reasonably well with mobile application integration onto the desktop and activation out of the box. Although it still uses the Apple meta tags to find icons and behavior settings, everything at least works as you would expect – icons to the desktop on pinning, WebView based full screen activation, and reliable application persistence as the browser/app is treated like a real application. Hopefully iOS will at some point provide this same level of rudimentary Web app support. What’s also interesting to me is that Microsoft hasn’t picked up on the obvious need for a solid Web App platform. Being a distant third in the mobile OS war, Microsoft certainly has nothing to lose and everything to gain by using fresh ideas and expanding into areas that the other major vendors are neglecting. But instead Microsoft is trying to beat the market leaders at their own game, fighting on their adversary’s terms instead of taking a new tack. Providing a kick ass mobile Web platform that takes the lead on some of the proposed mobile APIs would be something positive that Microsoft could do to improve its miserable position in the mobile device market. Where are we at with Mobile Web? It sure sounds like I’m really down on the Mobile Web, right? I’ve built a number of mobile apps in the last year and while overall result and response has been very positive to what we were able to accomplish in terms of UI, getting that final 10% that required device integration dialed was an absolute nightmare on every single one of them. Big compromises had to be made and some features were left out or had to be modified for some devices. In two cases we opted to go the Cordova route in order to get the integration we needed, along with the extra pain involved in that process. Unless you’re not integrating with device features and you don’t care deeply about a smooth integration with the mobile desktop, mobile Web development is fraught with frustration. So, yes I’m frustrated! But it’s not for lack of wanting the mobile Web to succeed. I am still a firm believer that we will eventually arrive a much more functional mobile Web platform that allows access to the most common device features in a sensible way. It wouldn't be difficult for device platform vendors to make Web based applications first class citizens on mobile devices. But unfortunately it looks like it will still be some time before this happens. So, what’s your experience building mobile Web apps? Are you finding similar issues? Just giving up on raw Web applications and building PhoneGap apps instead? Completely skipping the Web and going native? Leave a comment for discussion. Resources Rick Strahl on DotNet Rocks talking about Mobile Web© Rick Strahl, West Wind Technologies, 2005-2014Posted in HTML5 Mobile Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Search Results

Search found 13810 results on 553 pages for 'security roles'.

Page 192/553 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199 | Next Page >

- by Dan Albey

- by Aamir Hasan

- by Rick Finley

- by DBUK

- by alanc

- by wizard

- by Mike Hanley

- by Tman

- by user1236435

- by Liran

- by David DelMonte

- by pogo

- by mark

- by Kevin

- by ahiru

- by user1960172

- by Jebli

- by Asaf Saf

- by Hillgod

- by sharas

- by Patrick

- by user65965

- by Betaxpression

- by Tanu Sood

- by Rick Strahl

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199 | Next Page >