Search Results

Search found 41766 results on 1671 pages for 'two finger drag'.

Page 192/1671 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

• Understanding ESXi and Memory Usage

  - by John

  Hi, I am currently testing VMWare ESXi on a test machine. My host machine has 4gigs of ram. I have three guests and each is assigned a memory limit of 1 GB (and only 512 MB reserved). The host summary screen shows a memory capacity of 4082.55 MB and a usage of 2828 MB with two guests running. This seems to make sense, two gigs for each VM plus an overhead for the host. 800MB seems high but that is still reasonable. But on the Resource Allocation Screen I see a memory capacity of 2356 MB and an available capacity of 596 MB. Under the configuration tab, memory link I see a physical total of 4082.5 MB, System of 531.5 MB and VM of 3551.0 MB. I have only allocated my VMs for a gig each, and with two VMs running they are taking up almost two times the amount of ram allocated. Why is this, and why does the Resource Allocation screen short change me so much?

  Read the article

• dhclient append settings from multiple DHCP servers

  - by Brian

  I have a server with two interfaces connected to two separate networks, using DHCP for both. When dhclient is writing /etc/resolv.conf, I would like it to append settings that aren't already there. For instance, if I receive from one DHCP server: nameserver 10.0.0.1 search one.mydomain.com and from another: nameserver 10.1.1.254 search two.mydomain.com Then resolv.conf should look like this: search one.mydomain.com two.mydomain.com nameserver 10.0.0.1 nameserver 10.1.1.254 At the moment, it seems the last dhclient overwrites whatever was there. I know I can preconfigure settings in dhclient.conf using supercede or append, but then I have to hard-code the values. I've scoured the man page for dhclient, but it seems like dhclient prefers to work alone (i.e. not in conjunction with any other dhclients)...or am I missing something?

  Read the article

• Zipping folder with absolute path without keeping tree of folders

  - by Preston

  I am attempting to use the zip -r command to zip a folder which includes two files. I need to pass the absolute path of the folder with two files (/path/to/my/files/), which is causing all of the folders to be zipped with it, where as I only need the last folder (files/) and its contents to be zipped, so that when the file is unzipped, there is only one folder and the two files within it. How can I modify the command to be able to pass the absolute paths in the arguments while keeping only the last folder?

  Read the article

• Enable ReadyBoost on a second internal HDD?

  - by kd304

  I have two SATA HDDs in my desktop PC (one for daily activity, one for storage and backup). I can finely use ReadyBoost with pendrives, but I wonder, Is there a way I could use my underutilized second HDD to participate in the cacheing mechanism (same concept as having two CPU cores crunch things in parallel: have two HDDs fetch data in parallel)? Clearly speaking: I want to enable ReadyBoost on my separate D: drive.

  Read the article

• Can't select text with mouse in Word / Office 2007

  - by asc99c

  I'm having a very weird problem here for the last few months. In Word, and in fact all programs from the Office 2007 suite, I can't drag the mouse pointer to select text. I can click at a point in the text and the cursor moves correctly to that point. If I double click, the word under the cursor is selected, and triple clicking selects the whole line. However if I hold the mouse button down and drag the mouse, no text is selected. Occasionally the problem disappears and everything works fine, but it then reappears a few minutes later. Text selection with the mouse works everywhere else (Firefox, PuTTY, OpenOffice), just not in Office. The only addins are Google Desktop Office Addin, and Person Name (). For info it is Office 2007 SP3, running on Windows 7 64-bit.

  Read the article

• Diff -b and -w difference

  - by dotancohen

  From the diff manpage: -b, --ignore-space-change ignore changes in the amount of white space -w, --ignore-all-space ignore all white space From this, I infer that the difference between the -b and -w options must be that -b is sensitive to the type of whitespace (tabs vs. spaces). However, that does not seem to be the case: $ diff 1.txt 2.txt 1,3c1,3 < Four spaces, changed to one tab < Eight Spaces, changed to two tabs < Four spaces, changed to two spaces --- > Four spaces, changed to one tab > Eight Spaces, changed to two tabs > Four spaces, changed to two spaces $ diff -b 1.txt 2.txt $ diff -w 1.txt 2.txt $ So, what is the difference between the -b and -w options? Tested with diffutils 3.2 on Kubuntu Linux 13.04.

  Read the article

• Is it possible to use a dual processor computer as your desktop?

  - by Ivo Flipse

  I've seen some people suggesting to get a motherboard that supports two processors and stick two Xeon Nehalem processors in it. Could you use this system as a desktop PC or is this useless or even impossible? It's more hypothetical question if Windows 7 would support such a set-up. I know you could just take an i7, but wouldn't two of those processors be a whole lot more awesome? Like the previous generation Skulltrails? The idea would be to have a motherboard like this ASUS Z8NA-D6C Dual LGA 1366 Intel 5500 ATX and two Xeons (since I don't think i7's could be used) Intel Xeon E5405 Harpertown to run something like Windows 7 Ultimate.

  Read the article

• How to achieve redundancy across data centers?

  - by BrandonBT

  I have a LAMP server with a lot of hardware redundancy built in. I am not worried about the server becoming unavailable. What I am worried about, however, are potential network issues in the data center the server is in. What I would like to have is another server in another data center for redundancy. Load balancing is less of a concern. With that said, I am relatively clueless on two points: How to have two servers in two geographically separate data centers that have exactly the same data, in terms of both files and MySQL databases. How to ensure that all traffic coming into one data center are automatically transferred to the other database in the case of a network or server failure at the first data center. Any guidance on how to accomplish the above two problems would be greatly appreciated.

  Read the article

• Add second ip address to an existing SQl 2008 failover clustering

  - by Cédric Boivin

  Hello, I got actually a failover cluster on Windows Server 2008, with sql server 2008. On each server i got two network card, with two different network one are on 10.10.10.x and other are on 192.168.99.x I want my sqlserver cluster listen on the two network. Is it possible and how i add new ip address. When i add a new ip address directly in the cluster, and i do a telnet on the 1433 port with the new cluster ip address it's not working. Thanks

  Read the article

• Can a website see/know my MAC address even if I use a VPN?

  - by ilhan

  I have searched other results and read many of them but I could not get an enough information. My question is that can a website see my MAC address or can they have an information about that I'm the same person under these conditions: I am using a VPN and I use two IPs: first one is normal one, the second one is the VPN's IP. I use two browsers to hide behind browser fingerprinting. I use both browsers with Incognito Mode. I always use one for normal IP, one for the VPN IP. I do not know that if the website uses cookies or not. But can they collect an enough information to prove that these two identities belong to same person? Is there any other way for them to see that I am the same person? I use different IPs, different browsers and I use both browsers in incognito mode. I even changed one of browsers language to only English. So even if they collect my info from browser, they will see two browsers using different languages. (Addition after edit): So I have changed my IP and browser information and the website can not reach this information anymore to prove that I am the same person using two accounts. Then let's come to the title: Can they see my MAC address? Because I think that it is the last way that they can identify me and my main question is that. I wrote the information above to mention that I changed IPs and I have some precautions to avoid browser fingerprinting (btw my VPN provider already has a service about blocking it). I wrote them because I read similar advices in some related questions but my question is that can they see my MAC address (or anything else that can make me detected) despite all these precautions. And lastly, Is there an extra way to be anonymized that I can do? For example, can my system clock or anything else give an information? Thanks in advance.

  Read the article

• VM's, virtual networks and my home network.

  - by Jason Taylor

  I want to create a small lab of VM's to test out networking with. I have two PC's running VMWare and I need the VM's on these two PC's to be connected to their own LAN. I am planning on bridging the VM's into my home network. My home network and PC's are in the 192.168.0.0 range, but I want my VM's to be in 10.1.0.0. If I do it this way (Bridging the VM's on both hosts into the network) will the VM's be able to communicate? Will my home router freak out seeing two different subnets? Is there another, easier way to connect the virtual lan's on two vmware workstations together?

  Read the article

• How to migrate Lotus Notes Mail in database to Exchange public folder?

  - by elsni

  I need to migrate a Lotus Notes Mail database to Exchange. In the past, Users get mails in their Notes mail accounts and sort them manually by drag and drop in a specific folder structure in a seperate Notes mail database. This should be mapped to Exchange. I considered using outlook and a sharepoint Library mapped to outlook, but Outlook does not support drag and drop from the mail account to a standard doclib and the discussion libs do not support folders. So I think it's the easiest way to use an Exchange public folder instead of a sharepoint lib, which should work as in Notes (correct me if I'm wrong). But how I do migrate the old Notes db to the public folder including all subfolders? Thank you!

  Read the article

• Folder vs File Folder - Can I create a folder from the command line?

  - by Tim Gradwell

  If I create a shortcut to a folder and drag the shortcut onto the start menu, then the shortcut on the start menu behaves just like any other shortcut - click it to open the folder in explorer. However, if I drag the folder onto the start menu, then it expands in-situ. If I then copy this shortcut(?) into another location on my machine and compare it to other files/folders, its type appears as "Folder" as opposed to "File Folder" (which is what I get when I choose File-New-Folder. What's the difference between these two types of folder? Can I create one of these folders without dragging onto the start menu? Thanks

  Read the article

• On ESXi, guest machines hang for significant intervals compared to real machines. How can I fix this?

  - by Tarbox

  This is ESXi version 5.0.0. We plan on upgrading to 5.5 eventually. I have four code profiles, two taken on a real, unvirtualized machine, two taken on a virtual machine. Ordering the list of subroutines by time spent in each one, the two real profiles are practically identical. The two virtual profiles are different from each other and from the real profiles: a subset of subroutines are taking a lot more time on the virtual machines, and the subset is different for each run. The two virtual profiles take a similar amount of time, which is 3 times the amount of time the real profiles take. This gross "how long does it take?" result is consistent after hundreds of tests across three different virtual machines on two different host machines -- the virtual machine is just slower. I've only the code profiling on the four, however. Here's the most guilty set of lines: This is the real machine: 8µs $text = '' unless defined $text; 1.48ms foreach ( split( "\n", $text ) ) { This is the first run on the virtual machine: 20.1ms $text = '' unless defined $text; 1.49ms foreach ( split( "\n", $text ) ) { This is the second run on the virtual machine: 6µs $text = '' unless defined $text; 21.9ms foreach ( split( "\n", $text ) ) { My WAG is that the VM is swapping out the thread and then swapping it back in, destroying some level of cache in the process, but these code profiles were taken when the vm in question was the only active vm on the host, so... what? What does that mean? The guest itself is under light load, this is a latency problem for my users rather than throughput. The host is also under a light load, if I knew what resources to assign where, I could do it without worrying about the cost. I've attempted to lock memory, reserve cpu, assign a restrictive affinity, and disable hyperthread sharing. They don't help, it still takes the VM 2-4x the amount of time to do the same thing as the real machine. The host the tests were run on is 6x2.50GHz, Intel Xeon E5-26400 w/ 16gigs of ram. The guest exhibits the same performance under a wide combination of settings. The real machine is 4x2.13GHz, Xeon E5506 w/ 2 gigs of ram. Thank you for all advice.

  Read the article

• Cross platform KVM over ethernet

  - by Falmarri

  I'm not sure if this exists, but this is what I'd like to do. I have a laptop and a desktop that I work on about equally. The laptop runs windows 7 and the desktop is on kubuntu 10.04. What I want to be able to do is be able to drag my mouse accross my screen and have it act like my laptop is a second monitor. Whereby I can use my desktop mouse, drag it say to the left off of my desktop monitor, and use it on my laptop (I don't care about the keyboard, just the mouse). Is that possible? Are there any other solutions that exist? I'd prefer not to have a physical kvm switch.

  Read the article

• Which to install: Apache Worker or Prefork? What are the (dis-)advantages of each?

  - by Aron Rotteveel

  Based on the descriptions for both the Prefork and Worker MPM, it seems the prefork type is somewhat outdated, but I can't really find a proper comparison of the two types. What i'd like to know: What are the differences between the two versions? What are the (dis-)advantages of each server type? Are there any basic guidelines on which type to choose based on the conditions? Are there any big performance differences between the two?

  Read the article

• I have a sheet that has 2 cols; in one is the name, in the other there are one or more emails, separed by comma

  - by Totty

  I have an Excel worksheet that has two columns, in one is the name, in the other there are one or more emails, separated by a comma. Now, I want to get two columns with repeated names but unique emails, so no more than one email address in a single cell, I just want column one to have a name and column two to have an email. Now it is like this: name1 email1, email2, email3 name2 email1 name3 email1, email2 And I want it like this: name1 email1 name1 email2 name1 email3 name2 email1 name3 email1 name3 email2 thanks

  Read the article

• securing communication between 2 Linux servers on local network for ports only they need access to

  - by gkdsp

  I have two Linux servers connected to each other via a cross-connect cable, forming a local network. One of the servers presents a DMZ for the other server (e.g. database server) that must be very secure. I'm restricting this question to communication between the two servers for ports that only need to be available to these servers (and no one else). Thus, communication between the two servers can be established by: (1) opening the required port(s) on both servers, and authenticating according to the applications' rules. (2) disabling IP Tables associated with the NIC cards the cross-connect cable is attached to (on both servers). Which method is more secure? In the first case, the needed ports are open to the external world, but protected by user name and password. In the second case, none of the needed ports are open to the outside world, but since the IP Tables are disabled for the NIC cards associated with the cross-connect cables, essentially all of the ports may be considered to be "open" between the two servers (and so if the server creating the DMZ is compromized, the hacker on the DMZ server could view all ports open using the cross-connect cable). Any conventional wisdom how to make the communication secure between two servers for ports only these servers need access to?

  Read the article

• Ubuntu server boot degraded raid

  - by beacon_bonanza

  I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails.

  Read the article

• how to change the existing printed line in AWK

  - by manimaran

  Hi, when i execute the following line, its prints the words in newline. awk 'BEGIN { print "line one\nline two\nline three" }' like line one line two line three How can i print the info in the same line with flush the existing line. For example, while executing the loop, it should print 'one' then wipe out the line and prints 'two' then wipe out the line and prints 'three' etc. can you please assist me?

  Read the article

• VMware vSwitches and spanning tree

  - by dunxd

  I have two redundant core switches I want to connect to a new vSwitch I am setting up on a VMware ESX host. The switch will have two physical NICs each of which will connect to one of the core switches. The core switches are connected. If this was a physical switch, I would worry about connecting it to both core switches, because this would create a network loop. Do I need to worry about this for a VMware virtual switch? VMware's documentation says it is not possible to connect two vSwitches in a loop, therefore STP is not required. However, I am worried about connecting two physical switches together via a vSwitch.

  Read the article

• Firefox: fast dictionary language switching

  - by Lo'oris

  I have two language dictionaries installed on Firefox 3.6, and I would like to be able to switch really fast between them, using the keyboard. At the moment the only way I know I can switch is right clicking in a text input field, go into Language, and then click the language. I would instead to be able to switch between those two just hitting two keys at most, if possible just one (something like F13). Searching for addons I've found tons of extensions somewhat related but that don't actually do what I want.

  Read the article

• How do I enable subfolders in Dovecot?

  - by yarun can

  In the past I was able to drag and drop my folder with subfolders (local emails) into my imap accounts inside Thunderbird. Now I moved to my own vps and its running Dovecot. So far so good with emails. Today I wanted to copy some folders with messages again but I realized that it does not let me copy to folders. I can drag and drop individual emails into some folders in Imap however folders stuff does not work. I am not sure what this feature is called. The previous email servers might be using some other imap server so I am really not sure what it might be even called. Is this a Dovecot or Thundenbird thing? If it is a Dovecot feature how I enable it on my server? Dovecot is running on Debian Wheezy 64 bit vps thanks

  Read the article

• multiple droppable

  - by Sune

  Ive have multiple droppable divs (which all have the same size) and one draggable div. The draggable div is 3 times bigger than one droppable. When I drag the draggable div on the droppables divs I want to find which droppable has been affeckted. My code looks like this: $(function () { $(".draggable").draggable({ drag: function (event, ui) { } }); $(".droppable").droppable({ drop: function (event, ui) { alert(this.id); } }); }); the html <div style="height:100px; width:200px; border-bottom:1px solid red; " id="Div0" class="droppable"> drop in me1! </div> <div style="height:100px; width:200px; border-bottom:1px solid red;" id="Div1" class="droppable"> drop in me2! </div> <div style="height:100px; width:200px; border-bottom:1px solid red; " id="Div2" class="droppable"> drop in me2! </div> <div style="height:100px; width:200px; border-bottom:1px solid red; " id="Div3" class="droppable"> drop in me2! </div> <div style="height:100px; width:200px; border-bottom:1px solid red; " id="Div4" class="droppable"> drop in me2! </div> <div style="height:100px; width:200px; border-bottom:1px solid red; " id="Div5" class="droppable"> drop in me2! </div> <div style="height:100px; width:200px; border-bottom:1px solid red; " id="Div6" class="droppable"> drop in me2! </div> <div style="height:100px; width:200px; border-bottom:1px solid red; " id="Div7" class="droppable"> drop in me2! </div> <div class="draggable" id="drag" style="height:300px; width:50px; border:1px solid black;"><span>Drag</span></div> But my alert only shows the first which my draggable div (Div0) hits, how can I find the missing (Div1 and Div2), which also is affeckted?? Here's a guy with the same problem : http://forum.jquery.com/topic/drop-onto-multiple-droppable-elements-at-once

  Read the article

• QGraphicsView and custom Cursors

  - by Etienne de Martel

  I am trying to make use of a mix of custom cursors and preset cursors for my QGraphicsView. In my implementation we have created a notion of "modes" for the view. Meaning that depending on what "mode" the user is in, different things will happen on the left-click, or left-click drag. Anyway, none of that is the problem, just the context. The problem arises when I try to change the cursor for each mode. For instance, for mode 1 we want to show the regular Arrow cursor, but for mode 2, we want to use a custom pixmap. Seemingly simple we call graphicsview->viewport()->setCursor(Qt::QArrowCursor)  when we are switching to mode 1, and graphicsview->viewport()->setCursor(our custom cursor) for mode 2. Except it doesn't work at all. Firstly, the cursor does not change to the custom cursor. That is the first problem. However, if through another operation the drag mode of the graphics view gets set to ScrollHandDrag, the cursor will switch to the custom cursor once the drag operation is complete. Weird. But the plot thickens... Once we switch to the custom cursor, it can never be changed back to the ArrorCursor no matter how many times we call setCursor(Qt::QArrowCursor). it also doesn't seem to matter whether I call setCursor on the viewport or the graphics view itself. So, just for fun, I added a call to graphicsview->unsetCursor() just before we want to change the cursor, and that at least rectifies the second problem. The cursor changes just fine so long as we do a little HandDragging in between. Better, but certainly not optimal. However it should be noted, that doing the unsetCursor on the viewport doesn't work. it must absolutely be done on the graphicsview - regardless of the fact that we are setting the cursor on the viewport. To completely patch over the problem I have added these two lines after I set the cursor: graphicsview->setDragMode(QGraphicsView::ScrollHandDrag); graphicsview->setDragMode(QGraphicsView::NoDrag); Which works, but ye gads!! So something magical is happening inside these two methods that fixes the problem, but glancing at the code I don't see what. Something to do with the fact that the drag mode is changing the cursor I imagine. Just for completeness, I should also mention that the thing that triggers the mode change, is a QPushButton that has been added to the scene using QGraphicsScene->addWidget(). I don't know if that has anything to do with it, but you never know. I am hoping that either someone could clarify why I need to make these seemingly random calls. I don't think I am doing anything wrong anywhere. Thanks in advance for any help. EDIT: Here is an actual code example with the cursor patches as described above. You can look at and/or download them from the link below. It was a little long to paste here. I included the framework around which the cursors are changed, because I have a funny feeling that that is important somehow. https://gist.github.com/712654 The code where the problem lies is in MyGraphicsView.cpp starting at line 104. This is where the cursor is set in the graphics view. It is exactly as described above. Keep in mind, with the very ugly patches in place the cursors do work - more or less. Without those lines you will see very clearly the problems listed in the post above. Also included in the link, is all the code for a mainWindow that uses the view, etc... the only thing missing are the images I am using. But the images themselves don't matter, any 16x16 pngs will do.

  Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >