Search Results

Search found 10269 results on 411 pages for 'video sitemap'.

Page 192/411 | < Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >

  • Boot screen appears to be asking a question but garbled

    - by mark kaylor
    I'm running 12.04 Precise Pangolin, Kernel 3.2.0-32 w/ GNOME 3.4.2 I perused the prior questions/answers and did not find exactly the same problem, I am concerned that AUTOFSCK, Grub or some other critical event that needs some attention ? Any idea on how to get my video clean during boot? Once I get past the boot screen the video driver/card, etc is performing beautifully ! Here is a photo of the boot screen; nVidia GeForce CARD INFORMATION (lspci -vvv) 01:00.0 VGA compatible controller: NVIDIA Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Gateway 2000 Device 3a07 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: Kernel driver in use: nvidia Kernel modules: nvidia_173, nouveau, nvidiafb Thanks for your help/advice.

    Read the article

  • codes to convert from avi to asf

    - by George2
    Hello everyone, No matter what library/SDK to use, I want to convert from avi to asf very quickly (I could even sacrifice some quality of video and audio). I am working on Windows platform (Vista and 2008 Server), better .Net SDK/code, C++ code is also fine. :-) I learned from the below link, that there could be a very quick way to convert from avi to asf to support streaming better, as mentioned "could convert the video from AVI to ASF format using a simple copy (i.e. the content is the same, but container changes).". My question is after some hours of study and trial various SDK/tools, as a newbie, I do not know how to begin with so I am asking for reference sample code to do this task. :-) (as this is a different issue, we decide to start a new topic. :-) ) http://stackoverflow.com/questions/743220/streaming-avi-file-issue thanks in advance, George EDIT 1: I have tried to get the binary of ffmpeg from, http://ffmpeg.arrozcru.org/autobuilds/ffmpeg-latest-mingw32-static.tar.bz2 then run the following command, C:\software\ffmpeg-latest-mingw32-static\bin>ffmpeg.exe -i test.avi -acodec copy -vcodec copy test.asf FFmpeg version SVN-r18506, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --enable-memalign-hack --prefix=/mingw --cross-prefix=i686-ming w32- --cc=ccache-i686-mingw32-gcc --target-os=mingw32 --arch=i686 --cpu=i686 --e nable-avisynth --enable-gpl --enable-zlib --enable-bzlib --enable-libgsm --enabl e-libfaac --enable-pthreads --enable-libvorbis --enable-libmp3lame --enable-libo penjpeg --enable-libtheora --enable-libspeex --enable-libxvid --enable-libfaad - -enable-libschroedinger --enable-libx264 libavutil 50. 3. 0 / 50. 3. 0 libavcodec 52.25. 0 / 52.25. 0 libavformat 52.32. 0 / 52.32. 0 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 1 / 0. 7. 1 built on Apr 14 2009 04:04:47, gcc: 4.2.4 Input #0, avi, from 'test.avi': Duration: 00:00:44.86, start: 0.000000, bitrate: 5291 kb/s Stream #0.0: Video: msvideo1, rgb555le, 1280x1024, 5 tbr, 5 tbn, 5 tbc Stream #0.1: Audio: pcm_s16le, 22050 Hz, mono, s16, 352 kb/s Output #0, asf, to 'test.asf': Stream #0.0: Video: CRAM / 0x4D415243, rgb555le, 1280x1024, q=2-31, 1k tbn, 5 tbc Stream #0.1: Audio: pcm_s16le, 22050 Hz, mono, s16, 352 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 224 fps=222 q=-1.0 Lsize= 29426kB time=44.80 bitrate=5380.7kbits/s video:26910kB audio:1932kB global headers:0kB muxing overhead 2.023317% C:\software\ffmpeg-latest-mingw32-static\bin> http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.6001.7000&id=C00D11B1&contextid=230&originalid=C00D36E6 then have the following error when using Windows Media Player to play it, does anyone have any ideas? http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.6001.7000&id=C00D11B1&contextid=230&originalid=C00D36E6

    Read the article

  • how can i convert a .tpl file to a .php file? [closed]

    - by kim
    What do I do?? I am building a site and there is a categories.tpl that I want to go where sitemap.php is. sorry i am brand new to all this. let me try to be more clear.id show you a picture but it is marking it as spam. i have a menu at the top of my site like with any retail site. [About Cart Account and Products]. when you click products it takes to you the sitemap.php file. however i need the content from the categories.tpl to appear instead. (Categories in prestashop is another way of saying products) here is the categories.tpl code: {include file=$tpl_dir./breadcrumb.tpl} {include file=$tpl_dir./errors.tpl} {if $category-id AND $category-active} {$category-name|escape:'htmlall':'UTF-8'} {$nb_products|intval} {if $nb_products1}{l s='products'}{else}{l s='product'}{/if} {if $scenes} <!-- Scenes --> {include file=$tpl_dir./scenes.tpl scenes=$scenes} {else} <!-- Category image --> {if $category->id_image} <img src="{$link->getCatImageLink($category->link_rewrite, $category->id_image, 'category')}" alt="{$category->name|escape:'htmlall':'UTF-8'}" title="{$category->name|escape:'htmlall':'UTF-8'}" id="categoryImage" /> {/if} {/if} {if $category->description} <div class="cat_desc">{$category->description}</div> {/if} {if isset($subcategories)} <!-- Subcategories --> <div id="subcategories"> <h3>{l s='Subcategories'}</h3> <ul class="inline_list"> {foreach from=$subcategories item=subcategory} <li> <a href="{$link->getCategoryLink($subcategory.id_category, $subcategory.link_rewrite)|escape:'htmlall':'UTF-8'}" title="{$subcategory.name|escape:'htmlall':'UTF-8'}"> {if $subcategory.id_image} <img src="{$link->getCatImageLink($subcategory.link_rewrite, $subcategory.id_image, 'medium')}" alt="" /> {else} <img src="{$img_cat_dir}default-medium.jpg" alt="" /> {/if} </a> <br /> <a href="{$link->getCategoryLink($subcategory.id_category, $subcategory.link_rewrite)|escape:'htmlall':'UTF-8'}">{$subcategory.name|escape:'htmlall':'UTF-8'}</a> </li> {/foreach} </ul> <br class="clear"/> </div> {/if} {if $products} {include file=$tpl_dir./product-sort.tpl} {include file=$tpl_dir./product-list.tpl products=$products} {include file=$tpl_dir./pagination.tpl} {elseif !isset($subcategories)} <p class="warning">{l s='There is no product in this category.'}</p> {/if} {elseif $category-id} {l s='This category is currently unavailable.'} {/if} and here is the sitemap.php include(dirname(FILE).'/config/config.inc.php'); include(dirname(FILE).'/header.php'); include(dirname(FILE).'/product-sort.php'); $nbProducts = intval(Product::getNewProducts(intval($cookie-id_lang), isset($p) ? intval($p) - 1 : NULL, isset($n) ? intval($n) : NULL, true)); include(dirname(FILE).'/pagination.php'); $smarty-assign(array( 'products' = Product::getNewProducts(intval($cookie-id_lang), intval($p) - 1, intval($n), false, $orderBy, $orderWay), 'nbProducts' = intval($nbProducts))); $smarty-display(_PS_THEME_DIR_.'new-products.tpl'); include(dirname(FILE).'/footer.php'); ?

    Read the article

  • Nginx http_mp4_module seam installed but dont work

    - by Tahola
    I try to use the http_mp4_module on my Ubuntu server but that didnt seem to work at all. When i check nginx -V i get : nginx version: nginx/1.1.19 TLS SNI support enabled configure arguments: --prefix=/etc/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-log-path=/var/log/nginx/access.log --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --lock-path=/var/lock/nginx.lock --pid-path=/var/run/nginx.pid --with-debug --with-http_addition_module --with-http_dav_module --with-http_flv_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_mp4_module --with-http_perl_module --with-http_random_index_module --with-http_realip_module --with-http_secure_link_module --with-http_stub_status_module --with-http_ssl_module --with-http_sub_module --with-http_xslt_module --with-ipv6 --with-sha1=/usr/include/openssl --with-md5=/usr/include/openssl --with-mail --with-mail_ssl_module --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-auth-pam --add-module=/build/buildd/nginx-1.1.19/debian/modules/chunkin-nginx-module --add-module=/build/buildd/nginx-1.1.19/debian/modules/headers-more-nginx-module --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-development-kit --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-echo --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-http-push --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-lua --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-upload-module --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-upload-progress --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-upstream-fair --add-module=/build/buildd/nginx-1.1.19/debian/modules/nginx-dav-ext-module --with-http_mp4_module and --with-http_flv_module are there, I also add on sites-available/domaine.conf location ~ .mp4$ { mp4; mp4_buffer_size 4M; mp4_max_buffer_size 10M; } location ~ .flv$ { flv; } and Nginx restarted witout error, everything seem ok but when i check my urls myvideo.mp4?start=60 return a 404 error (what i think is normal) and video.mp4?starttime=60 return the video but whatever the starttime number is i get the full video from the begining, did i miss something ?

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • QoS for Cisco Router to Prioritize Voice and Interactive Traffic

    - by TJ Huffington
    I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

    Read the article

  • What is the best / latest software to convert DVD recorder disc to YouTube?

    - by Jian Lin
    I recorded some Wii gameplay to a DVD-R using a DVD recorder, and tried using Handbrake to convert it to YouTube compatible format. Basically, it needs resizing to 16:9, and selecting 00:03 to 3:10 of the chapter (out of the 7 minutes). It seems Handbrake can't do it for 480p... and if using AutoGK and then VirtualDub to resize and do video time selection, it feels so old school (autogk not updated since 2005)... Windows Movie Maker seems like 15fps video quality... Is there a way to do it nicely? Details if using Handbrake: I can't find a way to convert a DVD recorded video which is 720 x 480 (Wii Gameplay in 16 : 9 ratio) into 852 x 480... It seems that the only possible resize is to shrink but not to expand? It is fine to make it 720 x 406... except YouTube won't be able to show it as 480p... If it can be made 852 x 480, then YouTube can at least show it as 480p (besides 360p and 240p)... is there any way to do it? thanks.

    Read the article

  • How to speed up a HP M9517C

    - by Jen
    I bought a system with 8GB RAM, 1TB HD, Quad-Core AMD Phenom 9550, Nvidia Geforce 9300GE, 64-bit Windows Vista Machine. Bought it primarily because it was cheap and came with 25.5 inch screen. Problem: It's slow - if you can believe it. My Dell laptop 1525 is faster and more stable! I tried installing and dual-booting Linux Mint and ran into video and audio troubles. I need fast and stable and I'm going for awesome. Anyone have some suggestions on making this thing smoking hot? Vista is fine, but slows over time - suspect virus/spyware/etc.. But I need to use Photoshop, Fireworks, Dreamweaver, Illustrator. I've tried the alternatives and I just don't like them. When you've got deadlines looming you want to work with what you know. Also use Skype (and I had audio problems with it in Linux), gotomeeting, gotowebinar. Don't need MS Office. Tried VMWare, Virtualbox and again - I keep getting audio/video problems. I'd love someone's input on THEIR setup and how they got there. I'm sure I need to upgrade my video card, but what should I go to?

    Read the article

  • Monitor connected with WiDi just shows a black screen

    - by Pops
    I have a Dell XPS 18 and want to use an external monitor with it. The monitor has VGA and DVI-D inputs. The XPS 18 has no video output ports, but it does support Intel WiDi. I have a Netgear P2TV2000 WiDi receiver, but it only has composite and HDMI outputs. I'm connecting the receiver to the monitor with an HDMI cable and an HDMI/DVI-D adapter. So, in short, the video path is: Computer → WiDi → WiDi receiver → HDMI cable → HDMI/DVI-D adapter → Monitor After setting all this up, I can't get anything to display on the monitor. At the moment I power the monitor on, I can see my desktop for a brief fraction of a second, and then everything goes black. All of the relevant drivers have been updated to the latest versions. When I use a different WiDi-enabled computer to connect to the same monitor, everything works fine. When I use the original computer and receiver to connect to a TV, everything works fine. It's only when I connect the original computer to the monitor I want to use that the connection fails. What could be going wrong here, and how can I get the video to work consistently?

    Read the article

  • New SSD freezing on older motherboard (intel G31)

    - by DJM
    I have an ECS G31T-M motherboard running a Core2 Quad processor, 4gb RAM, Windows 7 32bit, Geforce 9600GT. Bought a Sandisk Extreme III 120GB (SDSSDX-120G-G25) and installed today. I'm outputting this from my 9600GT with included TV-out adapter to Component video (to my HDTV). This motherboard is SATA 2 and from what I can tell, SSDs run on the IDE controller and there is nothing fancy to set up advanced features of SSDs. I've noticed on other forums (but not verifying with ECS) this board does not support AHCI. I have two versions of Windows 7 installed on two drives, the SSD and an old 500G disc drive. When booted from my older 500G HDD, video plays fine on the HDTV. When booting the SSD windows 7 install, I am freezing constantly, as in, video plays OK for a minute, then picture freezes for 1-3 minutes (sometimes as audio continues playing) and returns for 20-30 seconds before doing the same thing again. Other tasks such as basic maneuvering through file folders seems to be no problem. Please help!! Do I need a new system for this thing to work, or could there be other fixes? I updated firmware to R201 to no avail. DJM

    Read the article

  • How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

    - by McCoy
    Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

    Read the article

  • Are there any wireless webcams/cameras that Windows will recognize as a capture device?

    - by Keithius
    I'd like to have a webcam in a different room from my computer, and the distance means USB is out of the question. I know there are many wireless cameras, but what I can't seem to find out is if any of them would be recognized by Windows as a capture device (just like a locally connected USB webcam). Most of the wireless cameras I can find (e.g., D-Link DCS920; Cisco-Linksys WVC54GCA, etc.) can all stream video directly from the camera itself, which is fine if you're using the camera as a "security" camera (for private use only), but not for other uses (say, sending the video to an online video streaming service, e.g., Ustream). It seems like this should be possible; after all, wireless (WiFi) printers with scanners are recognized by Windows. Are there any wireless (WiFi) cameras out there that would be recognized by Windows as a capture device in the same way as a USB webcam would? Alternatively, a camera that's not wireless (e.g., connects via Ethernet) would do the trick too - but I imagine if anyone is going to make a remote camera like this, they'd go the extra step and make it wireless, too.

    Read the article

  • User Receiving Partial Downloads

    - by JGB146
    Some background: I run a subscription-based poker strategy video website. Our videos range in length from 30 mins up to 80 mins, and in size from 20MB up to 500MB. The site is on a shared server with hostmonster.com One of my users is having problems downloading some of the larger video file. He reports problems with anything over 100MB. Basically, he's only getting part of the file, which means that the video stops before the end. He has tried multiple computers from multiple locations. He reports that he is able to successfully download 500MB files from other sites. He is using Internet Explorer (version unknown) as his browser. I have suggested that he try Firefox or Chrome to see if their download managers work any better for him, but as of yet I have not heard anything back. He has also reported that his downloads do not report any filesize. I see the same thing (no file size reported), but I have not experienced any problems with the downloads themselves. We pass the downloads through a php script which verifies login information and records the download to our database before returning the file. I suspect this is why there is no filesize reported. What else should I ask the user? What other things could he or I try?

    Read the article

  • file association in Windows 8

    - by Robith Nuriel Haq
    Associating a file to a program should be easy in Windows. However, i find it rather difficult when I'm working on Windows 8. associating a file to a desktop application that I install on my computer is easy because the whole operation is entirely the same with that in the previous Windows releases. What I find rather difficult is associating a file to a Metro apps that I download from the store. So far, I have been using Multimedia 8 (a metro app) to open my video files. However, this app cannot handle particular files-like *.dat-that can be associated easily to desktop video applications, such as media player classic and the like. When I try to associate my DAT files to Multimedia 8, there is indeed a "look for another app on this PC" option at the bottom of the "open with" pop up. But alas, I cannot figure out how to locate my Multimedia 8 app to which I want to associate my DAT file (as well as other video files that are not yet associated to this metro app). If anyone of you knows how to locate those metro apps, please tell me. many thanks

    Read the article

  • How can I fix my vista PCs screen resolution and refresh rate

    - by Antony Scott
    I have a media PC running media portal hooked up to my HDTV via HDMI. The TV is a couple of years old now, so only supports 1080i, which is 1920x1080@25Hz. I've got it connected to my PC via a HDMI compatible AV receiver. If I power up the amp (wait for it to boot fully) followed by the TV| and finally the PC, all is well and I get a picture. If I deviate from that sequence, or don't wait for the amp to book up fully, or even switch the amp to another video input (for example, my PS3). The PC sees this and defaults the screen resolution/refresh rate to 1920x1080@60Hz. So, I end up with a blank screen. To fix this I have to use UltraVNC from a PC and change the refresh rate back to 25Hz. So, is there a way to turn off that auto detection, or to manually define what resolution/refresh rates the monitor can do. I'm using the on-board Radeon 3200 video and do not have any of the AMD software installed as it seems to cause problems with video playback. So, I'm looking for a native vista fix, or possible some 3rd party software.

    Read the article

  • My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

    - by hrunting
    I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

    Read the article

  • How can I split 200Mbps of streaming traffic into routers?

    - by Jared
    As the title says, I have 200Mbps of streaming video traffic coming into my command center. How do I split the load between routers? Setup is like this: fiber --- router --- switch --- workstations I'm sorry I haven't dealt with this much traffic before. so please be gentle if you're going to kick me out :) EDITED FOR DETAILS: Okay, this specific project is for our company's IP CCTV system. We have deployed over 100++ cameras all over a building/campus and we have estimated each camera to take about 2Mbps of bandwidth each. Now, they're all connected to a switch and that's entirely fine. But coming into our command center, they have to be on a router since it'll get more than 200++ cameras next year (and I don't want to have too many hosts on one subnet). My plan was to have the 1st hundred on a 172.16.9.x block and the 2nd hundred on a 172.16.10.x block (all /24). The servers I have are currently sized to match (about 5 dual 6-core xeons) and I'd have about 19 workstations all streaming video from the 5 servers. (servers pull video from the cameras). But 200Mbps of constant traffic? How the hell do I even break this up? I need to have 1 gateway, to manage the routes... I honestly think I'm way in over my head.

    Read the article

  • LG W3000H-BN monitor cannot go above 1280x800

    - by Jo Profit
    I noticed that there are many people complaining about this issue with the W3000H but I have yet to find a solution that works for me. I am using Windows 7 Professional and and using a nVidia Quadro NVS 240 video card with a 4 monitor splitter cable. The cable from the monitor and the splitter are rated DVI-D Dual Link and the video card itself is rated for 2560x1600. I have installed the latest drivers for the video card and just grabbed the .inf, icm and cat file from the LG website and manually installed the monitor drivers. Does anyone have problems with the same setup? I have 3 other monitors (2 at 1920x1080 and 1 at 1280x1024). I really would like to be able to display the full resolution or else the large screen is useless. (I triple checked that the monitor itself supports this resolution). So monitor, cable, splitter and card supposedly support 2560x1600. Drivers are up to date but I cannot select that resolution when in the "Screen Resolution" menu, nor through the nVidia control panel. Please save me from madness :)

    Read the article

  • Constant crashes in windows 7 64bit when playing games

    - by yx
    I've tried everything I can possibly think of in trying to fix this problem and I'm totally out of ideas, so any help would be appreciated: The problem: whenever I fire up a game, it works for a short while with no problems and then it would crash. Either its a hard crash, forcing me to reboot, or windows would report that the display driver has stopped working and recovered. Here is a list of things I've already tried: Drivers - tried the latest drivers (catalyst 9.12) as well as the stock drivers that came with the video card. Also have the latest BIOS/chipset Memtest - Ran Memtest86+ overnight, had no problems, the windows diagnostic tool also does not find any problems. Overheating - Video card/cpu temperatures are well below peak (42 and 31 Celsius receptively) PSU Voltage - CPUID shows that the voltage levels are all above what they should be. The PSU itself is only roughly 16 months old and is a good model. HDD - No errors when checked GPU - Brand new (replaced previous card since I thought it was the problem, apparently not) Overclocking - Everything is at stock levels, memory voltage is set to manufacturer's standard Specs: Motherboard: ASUS P5Q Pro CPU: Core 2 Duo E8400 3.0 ghz OS: Windows 7 home premium 64 bit Memory: Mushkin Enhanced 4GB DDR2 GPU: Sapphire HD 5850 1GB PSU: SeaSonic M12 600W ATX12V DirectX: DX11 Event Viewer after a crash always has these logged: A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 1 The details view of this entry contains further information. A fatal hardware error has occurred. Reported by component: Processor Core Error Source: Machine Check Exception Error Type: Bus/Interconnect Error Processor ID: 0 The details view of this entry contains further information. A previous card that I had (4850x2) also had these errors, so I changed video cards, but the same thing is happening.

    Read the article

  • 2 subnets off of 1 PC with 2 NICs

    - by Jeff
    I have a general setup I'd like to do with some IP cameras. This seems like it will work but I think I may be missing something. Our system consists of a video recorder PC connected to a switch which is connected to a number of IP cameras. I'd like to connect this system into an existing network but I want it on a different subnet. The main reason is that the cameras use a lot of bandwidth that I don't want slowing down the existing network. My idea was to install 2 NICs on the video recorder pc. 1 NIC connects to the existing network on 192.169.1.x for example, and the other NIC connect to the switch with the cameras. This NIC would be 192.168.100.x. Then we could remote to the video recorder PC with a GoToMyPC type thing for administration via the existing network. I've included a diagram of how I see this working but I'm a little fuzzy on the setup of the NICs (if this can work at all). My problem may be trying to deal with 2 subnets without a router but It really doesn't seem like it's necessary in this situation. BTW, gliffy is cool.

    Read the article

  • How do I stop panning on a monitor that supports a specific resolution?

    - by IronicMuffin
    Hi all, I've been battling this for a few days now. Any and all help is appreciated. I have a planar monitor with a native res of 1280x1024. At one point, I had used PowerStrip to override "something" and set the res to 1600x1200, and it worked great. I then installed new intel graphics drivers for my 86895g (or w/e model) video card, which screwed up whatever settings I had. If I set it to 1600x1200 this time, it would set the res correctly, but give me a 1280x1024 viewport and the screen would pan when the mouse got to the edges of the screen. Absolutely not useful. Ok, so I was limited to 1280x1024 now. W/e. Now...enter new video card with two video ports. I have two monitors now and the latest nVidia drivers. I decide to try to get dual 1600x1200 going...ended up screwing the original monitor up so much now that it's at 1280x1024, with a 1024x768 viewport and panning! Absolutely not usable now. So what I need, and I can't seem to find on any forums, is help doing one or more of the following: Clearing out all monitor/edid info out of the windows registry without corrupting the registry. Actually correctly override the EDID values and get my sweet res back. Some other way of getting back to at least dual 1280x1024 with NO panning. Note: My device manager shows 4 monitors for some reason. My registry shows entries for all sorts of monitors that have been hooked up to the machine over the years. It's making it difficult to debug. Experience with PowerStrip would be helpful. I've been mucking with Phoenix EDID designer and MonInfo as well, but I'm stumbling around in the dark with these. Windows XP SP2 nVidia GeForce 6200 nVidia drivers: v258.96 Monitor: Planar PL 1910M Thanks!

    Read the article

  • Monitor is flashing through camera but not in the naked eye

    - by odyodyodys
    Two monitors: Samsung T23C350 - Samsung 2243NW Lets call the first A and the other B. A is a LED monitor with a 2ms response time (in specs) with a native resolution of 1920*1080@60Hz B is an older not-led one with 5ms response in specs with a resolution of 1680*1050@60Hz In the attached images and video you'll see that A (on the LEFT) is flickering but this is not visible to the naked eye. I took some pictures and videos with a camera and a mobile phone. This is also happening to all digital camcorders I've tested. A has a setting response time with values normal, fast, fastest. No matter the setting, the effect is the same. A on the left and B on the right. You can see the flickering, although both are @60Hz A video where you can see both monitors. A is always the left monitor. Another video where you can see what my digital camera sees. Another thing is that I managed to get a picture where the left monitor is completely black whilst the right one is displaying fine. This proves that the monitor is continuously flashing. My question is: Is this normal behavior and what is causing it? Am I affected by this fast flickering? I am using this as my primary monitor and as a programmer I have to keep my eyes on it for hours.

    Read the article

  • FFmpeg overlay two videos, one input with transparency

    - by Gian B.
    I am trying to create a karaoke from a CD+G file (converted to AVI using FFmpeg) and add a video as a background of the lyrics. Here's a screenshot of a the output from CD+G conversion, for simplicity let's call this lyrics.avi http://imgur.com/wUwHUhV Now a have this video.mp4 file that I'd like to put behind this lyrics.avi Here's a sample of what I'm trying to achieve http://imgur.com/8GuWXtQ I'm sure most of you are familiar with karaoke. I haven't used FFmpeg much and I'm not really sure if what I want to achieve is possible with FFmpeg. Is it possible to overlay two videos, and add a transparency to one of the videos? In this case the colour black? How can I set the offset time of the lyrics.avi? Here's the command the I've tried so far: ffmpeg -i video.mp4 -i lyrics.avi -filter_complex "nullsrc=size=854x480 [base]; [0:v] setpts=PTS-STARTPTS, scale=854x480 [upperleft]; [1:v] setpts=PTS-STARTPTS, scale=854x200 [bottomleft]; [base][upperleft] overlay=shortest=1 [tmp1]; [tmp1][bottomleft] overlay=shortest=1:y=280" -c:v libx264 -y karaoke.mp4

    Read the article

  • How do I install a different OS on a Compaq Presario cq56 with preinstalled SuSE 11?

    - by McCoy
    Thing is, I don't have a clue of Linux systems, I usually use WinXP. Bought a notebook with SuSE 11 on it, because I have my XP licence and thought I could install that if I found the chipset drivers for the hardware (which I'm not completely sure I have the right versions of). Then I thought I'd give it a shot with the SuSE, looked nice enough. But I can't get my external hd to work (tried force mount) and the banshee doesn't do anything like playing video. Since that is one of the two main purposes of this notebook, I need to get that to work. Tried downloading VLC player, but that only works with SuSE 11.1 upwards. So I downloaded a SuSE 11.3 and burned the iso. But surprise, no way the notebook would boot from cd. Same with the XP cd (considered setting up a dual boot). And no, I can't get to BIOS to reset to default, either. So I can basically do nothing else than going online with this thing and that's not enough for me (gamer in withdrawal, yikes!). I need at least to get to my firefox profile on the external hd and be able to watch video. Can somebody please help me? I think at this point I'd prefer to install XP and MAYBE the SuSE 11.3 after that. I'm not a native speaker, so please speak plainly, thanks. :) Edit: if this is impossible, could someone please help me with the external hd mount and video playback? Edit: Found out how to boot from cd by now. But still no XP, because I get bluescreen after bluescreen while setup is loading files. I guess it's the missing SATA drivers...

    Read the article

< Previous Page | 188 189 190 191 192 193 194 195 196 197 198 199  | Next Page >