Search Results

Search found 14598 results on 584 pages for 'address'.

Page 193/584 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Clarification of the difference between PCI memory addressing and I/O addressing?

  - by KevinM

  Could someone please clarify the difference between memory and I/O addresses on the PCI/PCIe bus? I understand that I/O addresses are 32-bit, limited to the range 0 to 4GB, and do not map onto system memory (RAM), and that memory addresses are either 32-bit or 64-bit. I get the impression that memory addressing must map onto available RAM, is this true? That if a PCI device wishes to transfer data to a memory address, that address must exist in actual system RAM (and is allocated during PCI configuration) and not virtual memory. So if a PCI device only needs to transfer a small amount of data at a time, where there is no advantage to putting it into RAM or using DMA, then I/O addressing is fine (e.g. a parallel port implemented on a PCI card). And why do I keep reading that PCI/PCIe I/O addressing is being deprecated in favour of memory addressing? Thanks!

  Read the article

• How to enable a Web portal-based enterprise platform on different domains and hosts without customization

  - by S.Jalali

  I work at Coscend, a cloud and communications software product company. We have built a Web portal-based collaboration platform that we would like to host on five different Windows- and Linux-based servers in different hosting environments that run Web servers. Each of these Windows and Linux servers have a different host name and domain name (and IP address). Out team would appreciate your guidance on: (1) Is there a way to implement this Web portal-based platform on these Linux servers without customizing the host name, domain name and IP address for each individual instance? (2) Is there a way to create some variables using JavaScript for host name and domain name and call them from the different implementations? (3) Can these JavaScript modules be made portable and re-usable object modules for different environments and instances? The portal is written in JavaScript that is embedded in HTML5 and padded with CSS3. Other technologies include Flash, Flex. Databases used are PostgreSQL and MySQL.

  Read the article

• How do I change the domain name of my AD DS? [closed]

  - by Gaate

  I recently set up a server with AD DC and used a mydomain.local address for it. I now would like to be able to access the server through remote desktop from outside my local network. So I have purchased a domain name that I have set up with my router for DDNS and forwarded to the IP of my server. I was wondering a few things. A) Is there a way I can forward the DDNS to point to my current AD DC x.local address so I wouldn't have to change the domain to log in from outside of local network? B) If there is not a way to do what I mentioned above, what is the easiest way to change the Domain Name (mydomain.local) in my AD DC? Should I completely remove it or is there a way to change it? I am using windows server 2012.

  Read the article

• Port forwarding (portmap) works only locally

  - by Tag Wint

  There are four hosts hostA winXP hostB Win2003 hostC Linux RHEL hostD Linux RHEL hostA cannot connect to C and D directly, but B can hostA connects to hostB using VPN hostB and hostC belong to the same subnet1 hostD is in subnet2 From hostA I need to connect to hostC and hostD by SSH. Now I can do it as follows: 1.connecting from hostA to hostB by RDP logon and there: 2.start putty client. I'd like to omit step 1 and connect from A to C and D directly On hostB I have admin acoount and configure port forwarding as follows: netsh interface portproxy add v4tov4 listenport=N1 connectaddress=hostC_IP connectport=N2 netsh interface portproxy add v4tov4 listenport=N3 connectaddress=hostD_IP connectport=N2 netsh interface portproxy show all: Listen on IPv4: Connect to IPv4: Address Port Address Port --------------- ---------- --------------- ---------- * N1 hostC_IP N2 * N3 hostD_IP N2 Now from hostB I can connect to either C and D: ssh localhost:N1 ssh localhost:N3 from hostA ssh hostB:N1 works too, but ssh hostB:N3 DON'T I guess the reason might be different subnets, still have no idea how to fix it. What should I do?

  Read the article

• Setting domain name to web application [on hold]

  - by aditk

  I have a website and I have kept the structure to be: Website Web Application 1 Web Application 2 Now, I want to access my website at example.com and access web applications using webapp1.example.com or webapp2.example.com; I have a control panel for my domain name from where I have set up a “web forward” to my server. From what I have done, I am getting to see my IP address when I type in domain name. Yes, I have disabled cloaking here! How I would like it to be is, when I access example.com and then navigate to other pages, they should be shown in the address bar, e.g. http://example.com/firstpage.aspx and so forth. Is the structure I have set up a good one?

  Read the article

• Can't connect to service on ubuntu?

  - by user36914

  I have a service i just installed on a ubuntu workstation machine. Say its running under port 511. I can connect locally : telnet localhost 511 When i try to connect from a remote machine it fails telnet 192.168.0.1 511 Whats wierd is i tried to connect locally using the ip address and i get the following error: "Unable to connect to remote host: Connection Refused" I checked the status of the firewall: sudo ufw status and get back "status:inactive" So does anyone know why i can't connect remotely since the firewall is disabled and why can't i connect locally using its ip address. I don't know if this matters but its running under esxi.

  Read the article

• Destination host unreachable

  - by user1010101

  I have 2 router connected to 1 switch which contains two vlans, 1 router has the ip table of vlan1 and the other router have the ip table of vlan2 I have trunked both router cable to the switch. I have set 1 ip table per router which correspond to the ip address of the PC that have this router address as a gateway. When I ping from 192.168.100.2 to 192.168.200.2 it tells me that destination host is unreachable and the message is from the router 192.168.100.1. So I guess router for 192.168.100.x does not see the router for 192.168.200.x , right ? Or am I wrong ? What are good troubleshooting steps ? http://i.imgur.com/b94Ir.png is the representation of the network, i cannot post image since im not reputated enough.

  Read the article

• Internet connection fails in Ubuntu on VirtualBox when virtual machine is created from "Import appli

  - by Sanoj

  I have installed Ubuntu Server 9.10 in a virtual machine in VirtualBox, then I made a cope/clone and exported it with "Export appliance" so I can create many cloned virtual machines. But when I try to import an appliance, everthing seams to be fine with the Ubuntu except that it can't connect to Internet and doesn't get an IP-address. The machine is used in Bridged mode. And it doesn't help to change to NAT-mode either. The machine that I cloned seams to work fine, and get an IP address. How to fix this? Where am I doing wrong?

  Read the article

• iptables change destination IP without DNAT

  - by Mad_Ady

  Hello, I'm trying to workaround a broken application which insists on connecting to the private address (and thus unreachable) of a server, instead of connecting to the public address (even if the relevant port is open). Changing the application is not an option. I'm trying to add iptables rules on the client(s) to change the destination ip for the packets going to 192.168.251.3 to go to 1.2.3.4 instead. DNAT isn't working since 1.2.3.4 is not an IP on any of my client interfaces. Can anyone point me to the relevant documentation that allows me to use MANGLE to change destination IPs?

  Read the article

• old .pst files on a networked drive still being accessed

  - by icecurtain

  Real quick question, A few months back I have set up email accounts exchange using AD on a domain all is fine. (email, address books ,calendars etc.) But I left the old .pst files on a networked drive. For some reason outlook the clients are still accessessing the old .pst not for (email, address books ,calendars). I have removed an account with no adverse effect as a test. But can any one tell me why outlook is still accessing the old .pst, as I was going to delete all the old .pst files until they all had todays timestamp on.

  Read the article

• How would I Enable FTP on Home PC (Win7)?

  - by jp2code

  In my home, all PCs connect through a small router. Some wired and some wireless. Our Media PC (HTPC) is controlled via a Media Center TV style remote, so managing files on it is tedious. I can access all of the files on the HTPC from my desktop PC, but moving a 6 GB file from \\HTPC\Folder1 to \\HTPC\Folder2 involves copying the data to the desktop and then transferring it back. If I were on the HTPC, this would likely be handled by a simple address change for the file (i.e. it would be done almost instantly). I'm thinking if I could get an FTP program to connect to the HTPC, I could simplify things ...but how do I enable that ability on the HPTC? Then, how would I go about connecting to the HTPC? Would I simply enter \\HTPC as the FTP address?

  Read the article

• Two routers in a LAN

  - by taxi

  router A no wifi +--- pc01 +--- pc02 | +--- router B wifi +--- pc03 +--- printer In my LAN I have a modem-router (say A) (no wifi connection) acting as DHCP server, and connected to the Internet. Now, I want to add another router (say B) (with wifi connection) to the LAN, in order to connect wifi pc's and net printers. Here I would disable DCHP server functionality. Is it correct to connect router B to router A via an ethernet port? In router A I define an IP address (eg 192.168.1.100) to be assigned to router B (MAC address). I expect to see router B listed as an attached device, in router A's status, but on the contrary it is not listed.

  Read the article

• How Do I Get To Preferences In FireFox

  - by user123

  I'm currently trying to get to preferences in FireFox in Linux Ubuntu. Because I don't have 10 reputation, I can't post an image (otherwise I would). All I see in the browser is the Address Bar, Downloads and Home. If I right-click (or left click) on any of these, I don't have further options (other than Home, but it only allows me to add items to the toolbar, none of which are Preferences/Options/Etc). I tried vising a website to see if more options would open; nothing. I tried right clicking on the main page and each toolbar item (listed) to see if there was another options like "Preferences" or "Options"; nothing. I tried entering "Preferences" in the address bar, thinking maybe it would open automatically; nothing. I tried right clicking on FireFox on the Linux Menu to see if I could open options without opening the program (and tried this even when the program was open); nothing.

  Read the article

• Wrapping a point-to-point link

  - by user3712955

  I'm using a pair of IP radios (non-WiFi) to bridge my office engineering LAN (172.0.0.0/8) to a lab in another building. The radios work fine, but they expose a web management interface I'd like to hide, and they also generate traffic (ARP, STP, and more) that I need to keep off my (very, very clean) LAN segments. I have some ARM-Linux boards (similar to Beagle/Panda/RasPi) running Ubuntu, and I've put one at each end of the link, between the radio and the LAN. Each of the boards has 2 wired Ethernet interfaces, eth0 and eth1. The LAN segments are connected to eth0, and the radios are connected to eth1. I'd like to accomplish the following: Keep radio-originated traffic off my LAN segments! Hide all services provided by the radio (web, ssh, etc.) Transparently pass all traffic between the LAN segments (including things like ARP). The above also applies to the ARM-Linux boards: No stray traffic my LAN from them either! I'd like the system to look like a switch: LAN packets arriving at one eth0 appear at the other. And neither eth0 should have an IP address: The working system should behave like a CAT6 cable with some latency (instead of ARM boards and radios). Unfortunately, I'm confused about how to properly configure the ARM Ubuntu systems. What I'm guessing I need is a bridge on each board (br0?) and a VLAN (vlan0 or eth0.0?) to isolate the LAN traffic from everything else as it passes through the ARM boards and the radios. Then I need some kind of a firewall to block sending anything out eth0 that isn't from the other eth0 (via the VLAN). I've looked at the ip and ebtables commands (especially -t broute). While the concepts sorta-kinda make sense, I'm completely lost in the details. Edit: In the perverse case that a system on one of my LAN segments has the same IP address as one of the radios, or as eth1 on the ARM-Ubuntu boards, a VLAN won't work. Which I believe means I need to tunnel all traffic between the two eth0 interfaces to get that "like a wire" behavior. Help? Finally, I'd like to have a way to temporarily expose services on the ARM boards (ssh) and the radios (web) for maintenance purposes. Ideally, it would expose an IP address with ssh available on port 22. Once connected, I figure I'd start an X11 session and run a browser on the ARM board to access the radios. Or something. I could login via the console to enable/disable this, or perhaps could use a GPIO to trigger a script. I feel I've identified most of the pieces needed to make all this happen, but I have no idea how to combine them to make a working system. Thanks!

  Read the article

• A really unique case of Load Balancing

  - by Shamshun

  I have an internet connection which has limited up/down bandwidth per IP address. What I want to do is to get multiple IP addresses on a "single" LAN interface, and use a load balancer to distribute traffic through them. I was successful at getting 100 ip addresses on a single interface. my problem is that Linux and Windows use the first ip address of an interface by default, so my bandwidth is not increased. I would appreciate if someone tells me what Load Balancing software has the ability to distribute load between multiple IPs on a single interface. I have tried to do so on both Win7 and Backtrack-LinuxR2

  Read the article

• How can I redirect HTTP(S) traffic to another gateway?

  - by PsyStyle

  I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. All the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for that I'm using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway keeping untouched the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a DNAT like: DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case.

  Read the article

• Windows 7 computer apparently connected to working wireless network but can't access router page or internet

  - by Hemmer

  I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

  Read the article

• VPN on PC vs Mac

  - by allstar

  I am trying to connect to a VPN from my home computer, as opposed to my work computer which already has the network info set up. I have received instructions on connecting from a mac, but since I don't have that I'm trying to do the equivalent on my PC. I know the: server group name secret and my own login account and password Using the Windows 7 VPN, there's space for: Internet address destination name user name password domain (optional) I'm trying to determine what's what. I assume the internet address is the server. I've tried using the "secret" as the Password, b/c i'd think the first part is connecting to the VPN as opposed to logging in. It still wants a user name though. I tried mine, I tried the "group name". I would appreciate your help with this. Thanks!

  Read the article

• How can I set clean urls (enable rewrite) if I don't have a domain ?

  - by Patrick

  In order to enable clean urls in Drupal, I add the lines below to the lighttpd configuration file. However I'm now working on a local server and I don't have a domain available. So I need to work with this address http://local.ip/Sites/mywebsite I've tried to replace ["host"] with ["socket"] and replace the domain with ip and subfolders (see address above), but unsuccessfully. How can I set the configuration file to set clean urls even if I don't have a domain ? thanks $HTTP["host"] =~ "(^|\.)mywebsite\.com" { server.document-root = "/var/www/sites/mywebsite" server.errorlog = "/var/log/lighttpd/mywebsite/error.log" server.name = "mywebsite.com" accesslog.filename = "/var/log/lighttpd/mywebsite/access.log" include_shell "./drupal-lua-conf.sh mywebsite.com" url.access-deny += ( "~", ".inc", ".engine", ".install", ".info", ".module", ".sh", "sql", ".theme", ".tpl.php", ".xtmpl", "Entries", "Repository", "Root" ) # "Fix" for Drupal SA-2006-006, requires lighttpd 1.4.13 or above # Only serve .php files of the drupal base directory $HTTP["url"] =~ "^/.*/.*\.php$" { fastcgi.server = () url.access-deny = ("") } magnet.attract-physical-path-to = ("/etc/lighttpd/drupal-lua-scripts/p-.lua") }

  Read the article

• Virtualbox share guest (windows xp) printer to host(linux)

  - by M0E-lnx

  I have a weird situation. I own a printer that has 0 support in linux, but of course, it works in windows. So I have installed VirtualBox 3.1.2 with guest additions to provide access to my usb devices. I have successfully setup the printer and the guest os can print fine. Now, the question is: Is there any way to make this printer accessible to the host OS? I noticed that the guest OS takes an ip address of 10.0.2.15, but when I try to ping that address from the linux host, it goes nowhere. No response. Has anyone here done this before? can anyone think of a way to do this?

  Read the article

• Block a Server from reaching a machine

  - by user

  I have a Windows 2003 server that I want to block from accessing a specific IP address. I want to control this from the Server. because I control the machine. The traffic is http traffic (webservice call). It uses a non-standard port, so IP address+ Port combination would also work. Background: I have a development enviornment that for some reason is ignoring host file enteries under some circumstances. These host files point the enviornment at services in another Dev enviornment. Wne th host files are ignored, dev is talking to production. This is not my question, rather the motivation for this inquiry. I want is a failsafe to ensure dev will error instead of happily engaging in transactions with production. I control the dev server, I do not control the firewalls or the target production machine.

  Read the article

• My raspberry pi server hostname doesn't work?

  - by xSpartanCx

  The people over on the rPi forums don't have any answers for me... I've got a raspberry pi running raspbian server edition. My problem is that the only way I can ssh into it with putty is through the static ip. My router doesn't recognize the hostname; it shows the mac address as the name. This causes the pi not to show my apache2 website online (I think). The only way I've gotten it to work is using my other linux server to forward using virtual hosts, and that has to use the ip address, too. However, now that I have my other server off, the website doesn't work.

  Read the article

• How do I simplify my URLs with Apache (or DNS)?

  - by user45015

  I'm running Apache 2.2 with WHM / cPanel. Let me know what other info you need to answer this question. I want to set up some kind of forwarding/redirect so that the following occurs: _http://appname.mydomain.com/ (ignore the underscore, couldn't post actual links) actually sends you to _http://mydomain.com:8072/appname/ This can be overt (your browser address bar changes) or not, it doesn't really matter (although if I get to pick I would prefer the address bar NOT change). My initial thought was to use a CNAME, but I've since learned you can't include a port in your cname. Now I'm thinking I have to do something with my Apache VHOST? I am very much a novice at apache / web server internal workings, but I know my way around a command line well enough.

  Read the article

• Mirrored servers in data centers nationwide -- how? [closed]

  - by Sysadmin Evstar

  Possible Duplicate: Mirrored servers in data centers nationwide — how? Mirrored servers in data centers nationwide -- how? I flunked my IT interview by getting this question wrong. I thought that in the various metropolitan areas, an "http://google.com" request goes to the ISP's DNS server, which somehow returns an IP address for one of several geographically-nearby http servers, and then something internally rolls over to the next available local Google server. But then, I could not explain where the table of available local Google servers is actually cached, or the details of the IP address rollover. Or how they could manually take some server out of the rotation, from anywhere. So, what should I be reading now so I can ace this question next time? Also, what daemons run on these machines 24/7 to keep all those mirrored database disks synchronized?

  Read the article

• jquery selector for elements beside one another? [migrated]

  - by PaulHanak

  this SHOULD be simple, but I have been through the Jquery Selector help for about an hour now and nothing seems to be working. Help! I am basically trying to pull the text (an address) of a SPAN after a user clicks on the link next to it. Please note though, I will have about 10 on a page, so I cannot set a static address. It must be pulled when the user clicks. The html code: <a href="3" class="clicky">Click to Show Map</a> <span style="display: none" class="theaddy">123 Fake Street, Somewhere Else, 12341</span> So really, my question is, how do I grab the text from .theaddy when a user clicks on .clicky? As I said, I cannot use var propertyaddy = $(.theaddy).text(); because there are 10 of these addy's on the same page. I need some sort of "THIS" Next To kinda thing. I also tossed around the idea of placing the SPAN inside the A, but my efforts on that weren't working either. Thank you in advance for any help!

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >