Search Results

Search found 58546 results on 2342 pages for 'bpel http basic authentic'.

Page 193/2342 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Basic networking: Centos Server Router + Ubuntu Client setup.. unable to access outside world from client

  - by ale

  I am trying to set up my Centos Server with two NICs as a router. eth0 is connected to the outside world and eth1 is connected to an Ubuntu client. Here's eth0 on the server: DEVICE=eth0 BOOTPROTO=dhcp ONBOOT=yes TYPE=Ethernet eth1 on the server: DEVICE=eth1 BOOTPROTO=static IPADDR=192.168.0.10 # a free address on my network ONBOOT=yes TYPE=Ethernet My server has IPv4 packet forwarding turned on and my iptables only contains: # iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE # iptables --append FORWARD --in-interface eth1 -j ACCEPT My Ubuntu client has this in its /etc/network/interfaces auto lo iface lo inet loopback iface eth0 inet dhcp gateway 192.168.0.10 but I can't get an Internet connection from the server for my client. I can't even ping my server from the client: $ ping 192.168.0.10 Destination Host Unreachable

  Read the article

• php redirect pages under folder to different domain

  - by matt wilkie

  Using php, how might I redirect all pages under a folder to a different domain? Current site: http://www.example.org/dept http://www.example.org/dept/stuff http://www.example.org/dept/more http://www.example.org/dept/more/stuff New site: http://www.example-too.org/pets/stuff http://www.example-too.org/pets/more http://www.example-too.org/pets/more/stuff I've learned about how to redirect a single page: <? Header( "HTTP/1.1 301 Moved Permanently" ); Header( "Location: http://www.example-too.org/pets/more/stuff" ); ?> but how to apply this to dozens of pages without creating a php redirect for each one? I can't do this using apache mod_rewrite and .htaccess is disabled. thanks.

  Read the article

• LAMP: How do I set up http://myservername.com/~user access?

  - by Travesty3

  Been trying to Google this, but I can't figure out good search terms to find any info about what I need, since I don't really know what it's called. I'm pretty much being thrown to the wolves to figure out how to set up a LAMP server. We had someone who knew how to do it, he set one up and then quit. It was set up so that when I went to "http://{myservername}.com/~travis" it showed the contents of my /home/travis/public_html folder. This worked fine, then we lost power and the server restarted (I know, battery backup, but this is a dev server in a dev building so it's OK). Now, the browser can't find that URL. I also need to know how to set this up on a new server, so instead of wasting time diagnosing this problem (probably just something dumb I did messing with settings or something), I really need to know how to set this up from scratch. Thanks for taking the time to read this and (hopefully) answer!

  Read the article

• How to dynamically set HTTP Header in Apache 2.2?

  - by Michael

  Seems like this should be easy, but I cannot figure out the syntax. In Apache, I want to use the value of an existing request header to set a new request header. Some simple non-working code that illustrates what I'd like to do: RequestHeader set X-Custom-Host-Header "%{HTTP_HOST}e" Ideally, this would make a new HTTP header in the request called "X-Custom-Host-Header" that contains the value of the existing Host header. But it does not. Perhaps I need to copy the existing header into an environment variable first? (If so, I can't figure out how to do that either.) I feel like I'm missing something obvious, but I've gone over the Apache docs and I can't figure it out. Thanks for any help.

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network.

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either The Win 7 desktop or the VM's it alwats returns a destination host unreachable. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• HTTPS version of page throws 404, regular HTTP appears fine?

  - by Ryan

  I'm having a strange issue with a website in IIS on Windows Server 2003. It has a valid wild card certificate on it, however when I use HTTPS on the page I get a 404 not found. Without HTTPS it shows up fine. Also, if I go to the domain root of the site using HTTP the homepage shows up, but with HTTPS it REDIRECTS ME to a totally different website installed on the same IIS server. I am quite confused. I tried giving each site a unique IP address but it didn't change anything, I also tried changing the SSL ports, no luck. This IIS is setup to run PHP also. What could I check to resolve this?

  Read the article

• How to use Cambria as basic font when math symbols are needed?

  - by Jukka K. Korpela

  I first thought one could use Cambria for copy text (in Word), switching to Cambria Math only when needed (when a character is needed that is not present in Cambria). This does not seem to work that well. For example, if I need the minus-or-plus sign “±”, I cannot take it from Cambria, but if I use it from Cambria Math, it has a shape rather different from the style of “±”, “+”, and “–” in the text, if it is written in Cambria. Similarly, the multiplication sign “×” is much larger in Cambria Math than in Cambria. The obvious solution would be to use Cambria Math as copy text font, for uniformity. But Cambria Math lacks italic and bold. (Word’s formula editor uses Cambria Math by default and can do italic and bold, but it gets them from Plane 1 – they are special mathematic italic and mathematic bold characters, not italic and bold glyphs for normal characters.) Is there any better approach than using Cambria Math for copy text and switching to Cambria when italic or bold is needed?

  Read the article

• How to change hybrid disk to basic disk in windows 7?

  - by Marco

  I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

  Read the article

• HTTP, HTTPS and FTP is not working but SMTP and IMAP are working.

  - by nWorx

  Yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. I have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. How can I safely remove the rest of Norton Internet Security? Edit: Norton Internet Security 2010 is sucesfully removed, but still no connectivity...

  Read the article

• Microsoft Outlook 2007 - General Failure. The URL was: "<http:/something.com>". The parameter is incorrect

  - by Simon Peverett

  For the last two days, Outlook has decided it doesn't like URL's. Any email message that comes in containing an URL will show the following in an error dialogue message box when I click on the link: General Failure. The URL was: "http:/something.com/somewhere/". The parameter is incorrect If I copy the link into a browser, it works correctly. OS is Windows XP SP 3, Microsoft Office 2007 (Outlook), Internet Explorer 8 (also Chrome). I have, of course, Googled this and the two most popular solutions are: Solution 1: Add/Remove programs Set Program Access and Defaults Custom tab Make sure a default browser is selected Solution 2: Add/Remove Programs Select the MS Office 2007 item Click Change Click Repair I have tried both of these and I still get the problem. Has anyone else had this problem and solved it with a solution other than those listed above?

  Read the article

• Windows Server 2008 small business server 64-Bit Vmware Server 2 IIS 7 HTTP Error 503. The service i

  - by deeztech69

  Hello, I've tried to install vmware server 2 on a small business server 2008 host and IIS 7 stopped working. Everytime I tried to access any website on the server including OWA I get HTTP Error 503. The service is unavailable. I've tried to restart the IIS services and websites with no luck. Removed vmware server and the problem persists. There are no errors in the application logs concerning IIS or anything related. I'm stumped. Does anyone have an idea what's happenning here and how to fix it?

  Read the article

• Cisco training basic, entry, ASA/PIX. Help to understand network

  - by Inbr3d

  I need to learn how to configure Cisco ASA/PIX boxes within my network. I have the task to impliment a new ASA 5505 into a new site we purchased. I have over 9 devices linking my sites together and with no support from the previous IT company im finding it hard to get to terms with what they can do and what they are currently doing. I know there are hundreds of guides how to configure them but into an existing environment? can anyone recommend courses within the UK that can help me? Im not much of a book reader, i would need to be able to manage my network after. also, should i seek external contracts to support these devices? as they are critical for our work. thanks

  Read the article

• windows 2003 download utility from command line , http or ftp or any other protocol , from one comma

  - by Michael

  Hello , I need to know if there is anyway utility bult-in windows 2003 that I can use from the command line to download a file using only one command. Basically I know that I can download from ftp using the "ftp" utility but in order to do that I need to do first "ftp open" and then pass the other commands so it doesn't help me because I need to do perform the download only from one command. The download may be performed through http, ftp or any other protocol. OS Name: Microsoft(R) Windows(R) Server 2003 Enterprise x64 Editio OS Version: 5.2.3790 Service Pack 2 Build 379 Thank you in advance for any answer !

  Read the article

• How can write a mod_rewrite rule to determine if the domain is not the main domain then change https:// to http://

  - by Oudin

  I've set up a WordPress multi-site with a wildcard ssl for example.com to access the admin area securely. However I'm also using domain mapping to map other domains to other sites e.g. alldogs.com to alldogs.example.com. The problem is when I'm trying to access the front end of a site from and admin for a mapped domain e.g. alldogs.com by clicking "Visit Site" the Link goes to https://alldogs.com because of the forced ssl applied to the admin area. Which produces a certificate warning since the certificate is for example.com and not alldogs.com. How can write a mod_rewrite rule to determine if the url/link clicked on is not the main domain e.g. example.com then change the https:// to http:// so the site can be accessed via port 80 and not generate a certificate warning for that mapped domains

  Read the article

• Basic connectivity issues between Win 7 and XP mixed wired/wireless network. [Solved]

  - by Pulse

  Setup: Windows 7 x64 Ultimate desktop hard wired to Asus WL500gp router (WL500gpv2-1.9.2.7-d-r1445 firmware) Several Bridged VirtualBox VM's running XP, 7, ubuntu server 10.04, Mint 9 and SuSE 11.2 Win XP Pro SP3 notebook with D-Link Airplus wireless network card. No firewall or other security software currently running on either platform (at least for the duration of the test) Situation: Router is acting DHCP server Clients are receiving correct addresses and additional parameters Internet connectivity is available from all clients Windows 7 sharing is set to Network type = work (not home group) NetBT is disabled on all clients using smb over TCP What I can do: I can ping the router and internet addresses from the wireless XP notebook I can ping the Win 7 desktop and any VM from the XP wireless notebook I can ping all devices from the router All VM's and 7 can ping each other and the router as well as Internet addresses What I can't do: I cannot ping the XP wireless notebook from either the Win 7 desktop or the VM's; it always returns a destination host unreachable error. Tracert resolves the name or the XP notebook but also returns a destination host unreachable. From the above it would seem that something is blocking connectivity in a single direction (from the Win 7 box to the Win XP notebook) only but the router can ping the XP notebook. Some fresh input would be most welcome, as this is beginning to drive me batty. Thanks

  Read the article

• What are basic differences bettwen operating systems working as server? [closed]

  - by poz2k4444

  I'd like to know what are the differences bettwen differents operating systems working as server and what operating system is better using for an specific task like linux, unix, windows, solaris, novell, etcetera. It's not about a specific problem, it's just to know, for example, windows server works better with SQL Server, or Ruby with MacOS It's just I think some of us don't know what to choose when we have to use some specific technology

  Read the article

• How to forward http traffic through a specific network adapter.

  - by user18129

  i have the following scenario. Two laptops are connected via a router through the Ethernet ports. These two computers need to be able to communicate together. One computer also needs to access the internet through a different adapter (i.e. we will taking these two laptops two various sites where by the most common type of internet access will be wireless).In isolation all of the various adapters work fine (i.e. the internal network works fine, and the wireless connects to the internet). However,we try to turn on all of the adapters at the same time,the following occurs: If we bridge the two network connections together on the "Server" -The internet connection doesn't work through the wireless If we don't bridge the connections The internet connections don't work It seems like http traffic is trying to be sent through the Ethernet adapter (which of course is not connected to an internet connection). How can we solve this?

  Read the article

• New to Apache: what exacty should my conf file contain for a basic forward proxy?

  - by HankJDoomstorm

  Hi, I was hoping to get some help setting up Apache as a forward proxy, primarily just to know how it's done and for learning. I've found countless examples that look a lot like this: <IfModule mod_proxy> ProxyRequests On ProxyVia On <Proxy *> Allow from all </Proxy> But I'm not sure what to do with that information. What happens in the rest of the conf file? Do I just append it to the bottom and activate all the proxy modules? And if so, why isn't working when I try it with Firefox? Thanks

  Read the article

• What is the lightest, basic Email Server for Linux?

  - by Xeoncross

  I would like to install an extremely small mail server on my VPS and I am only interested in it sending out mail (activation links) from my web site. I don't need it to support mailboxes or incoming mail (although having that option for the future might be nice). The main requirement is that I don't have to worry about monitoring it as often and protecting against people bouncing messages off my server or wasting resources with incoming mail. I just want to send mail out. So something small that only listens on localhost would be ideal. The other requirement is that it is documented so I can learn how to set it up and manage it.

  Read the article

• Conditional https redirect to http depending on URL? (Apache)

  - by Joel Marcey

  Right now I redirect 100% of the time if someone does https://mysite.com <VirtualHost *:443> ServerAdmin [email protected] ServerName mysite.com ServerAlias www.mysite.com RewriteEngine on RewriteRule (.*) http://%{HTTP_HOST} [L,R=permanent] <VirtualHost> However, now I want to conditionally redirect. If a user goes to https://mysite.com/abc/, then I want to use https; otherwise redirect. How do I do this? I tried reading the docs, but just couldn't find what I needed. I am using Apache on Ubuntu Linux.

  Read the article

• windows-server-2003, windows server, download utility from command line , http or ftp or any other p

  - by Michael

  Hello , I need to know if there is anyway utility bult-in windows 2003 that I can use from the command line to download a file using only one command. Basically I know that I can download from ftp using the "ftp" utility but in order to do that I need to do first "ftp open" and then pass the other commands so it doesn't help me because I need to do perform the download only from one command. The download may be performed through http, ftp or any other protocol. OS Name: Microsoft(R) Windows(R) Server 2003 Enterprise x64 Editio OS Version: 5.2.3790 Service Pack 2 Build 379 Thank you in advance for any answer !

  Read the article

• Setting up Django application on lighttpd behind apache reverse proxy

  - by ml256

  I have a Django app at http://some_other_example.com (it will be behind firewall) running on lighttpd server with fastcgi. I need make it available under http://example.com/myapp. It works fine except for redirects - when I login from http://example.com/myapp/login it redirects me to http://example.com instead of http://example.com/myapp. When logging-in from http://some_other_example.com/login it is ok. My configuration: apache2.conf at example.com: ProxyPass /myapp http://some_other_example.com ProxyPassReverse /myapp http://some_other_example.com ProxyHTMLURLMap http://some_other_example.com /myapp <Location /myapp> SetOutputFilter proxy-html ProxyHTMLExtended On ProxyHTMLURLMap / /myapp/ </Location> in settings.py I added USE_X_FORWARDED_HOST = True but it didn't help

  Read the article

• Logins with only HTTP - are they as insecure as I'm thinking?

  - by JoeCool1986

  Recently I was thinking about how websites like gmail and amazon use HTTPS during the login process when accessing your account. This makes sense, obviously, since you're typing in your account username and password and you would want that to be secure. However, on Facebook, among countless other websites, their logins are done with simple HTTP. Doesn't that mean that my login name and password are completely unencrypted? Which, even worse, means that all those people who login to their facebooks (or similar sites) at a wifi hotspot in public are susceptible to anyone getting their credentials using a simple packet sniffer (or something similar)? Is it really that easy? Or am I misunderstanding internet security? I'm a software engineer working on some web related stuff, and although at the current time I'm not too involved with the security aspect of our software, I knew I should probably know the answer to this question, since it's extremely fundamental to website security. Thanks!

  Read the article

• How to add quotes in visual basic? [on hold]

  - by Poistenec

  I'd like to ask how is it possible to add quotes in VB. I'm trying to run command which contains quotes.. example: Shell("cmd.exe") SendKeys.Send("cd "c:\users\abc def" ") <<<<--- this line SendKeys.Send("{ENTER}") there is an syntax error. the problem is that I need to add quotes to some commands as there is a space in folderpath. As a beginner in VB I'm not really sure how to describe the poblem correctly so I hope you can see the it in my example :/ Thank you all in advance

  Read the article

• How do I set up a basic mail server for the first time?

  - by user41010

  This is a n00b question, sorry. I have a site running on a VPS, now I want to be able to receive mails at [email protected]. How do I need to set up the server? And how should I set up the mail client on my PC to receive those mails? The server is running CentOS/RHEL. I'll really appreciate if someone shed some light on the steps that need to be taken. It will be really helpful. Thanks in advance!

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >