Search Results

Search found 6053 results on 243 pages for 'solutionsfactory usage'.

Page 193/243 | < Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >

• Examples of localization in Perl using gettext and Locale::TextDomain, with fallback if Locale::Text

  - by Jakub Narebski

  The "On the state of i18n in Perl" blog post from 26 April 2009 recommends using Locale::TextDomain module from libintl-perl distribution for l10n / i18n in Perl. Besides I have to use gettext anyway, and gettext support in Locale::Messages / Locale::TextDomain is more natural than in gettext emulation in Locale::Maketext. The subsection "15.5.18 Perl" in chapter "15 Other Programming Languages" in GNU gettext manual says: Portability The libintl-perl package is platform independent but is not part of the Perl core. The programmer is responsible for providing a dummy implementation of the required functions if the package is not installed on the target system. However neither of two examples in examples/hello-perl in gettext sources (one using lower level Locale::Messages, one using higher level Locale::TextDomain) includes detecting if the package is installed on the target system, and providing dummy implementation if it is not. What is complicating matter (with respect to detecting if package is installed or not) is the following fragment of Locale::TextDomain manpage: SYNOPSIS use Locale::TextDomain ('my-package', @locale_dirs); use Locale::TextDomain qw (my-package); USAGE It is crucial to remember that you use Locale::TextDomain(3) as specified in the section "SYNOPSIS", that means you have to use it, not require it. The module behaves quite differently compared to other modules. Could you please tell me how one should detect if libintl-perl is present on target system, and how to provide dummy fallthrough implementation if it is not installed? Or give examples of programs / modules which do this?

  Read the article

• Can Sql Server BULK INSERT read from a named pipe/fifo?

  - by Peter

  Is it possible for BULK INSERT/bcp to read from a named pipe, fifo-style? That is, rather than reading from a real text file, can BULK INSERT/bcp be made to read from a named pipe which is on the write end of another process? For example: create named pipe unzip file to named pipe read from named pipe with bcp or BULK INSERT or: create 4 named pipes split 1 file into 4 streams, writing each stream to a separate named pipe read from 4 named pipes into 4 tables w/ bcp or BULK INSERT The closest I've found was this fellow (site now unreachable), who managed to write to a named pipe w/ bcp, with a his own utility and usage like so: start /MIN ZipPipe authors_pipe authors.txt.gz 9 bcp pubs..authors out \\.\pipe\authors_pipe -T -n But he couldn't get the reverse to work. So before I head off on a fool's errand, I'm wondering whether it's fundamentally possible to read from a named pipe w/ BULK INSERT or bcp. And if it is possible, how would one set it up? Would NamedPipeServerStream or something else in the .NET System.IO.Pipes namespace be adequate? eg, an example using Powershell: [reflection.Assembly]::LoadWithPartialName("system.core") $pipe = New-Object system.IO.Pipes.NamedPipeServerStream("Bob") And then....what?

  Read the article

• How to configure properly IntelliJ IDEA for deployment of JBoss Seam project?

  - by Piotr Kochanski

  I would like to use IntelliJ IDEA for development of JBoss Seam project. seam-gen is creating the project stub, however the stub is not complete. In particular it is not clear how to deploy such project. First of all I had to define manually web project facelet and add libraries to its deployment definition. The other problem was persistence.xml file. In the Seam generated project it does not exists, since Ant is using one of the persistence-dev.xml, persistence-prod.xml, persistence-test.xml files, changing its name, depending on deployment type (which is ok). Obviously I can create persistence.xml by hand, but it goes againts Seam way of development. Finally I decided to use directly ant, which is not partucularly comfortable. All these tweaks made me think that I am doing something wrong from the IntelliJ IDEA point of view. What is the efficient way of configuring IntelliJ for usage with JBoss Seam (deployment, in particular)? I am using JBoss Seam 2.1.1, Intellij 8.1.4, JBoss 4.3.3

  Read the article

• Implementing a 2 Legged OAuth Provider

  - by Rob Wilkerson

  I'm trying to find my way around the OAuth spec, its requirements and any implementations I can find and, so far, it really seems like more trouble than its worth because I'm having trouble finding a single resource that pulls it all together. Or maybe it's just that I'm looking for something more specialized than most tutorials. I have a set of existing APIs--some in Java, some in PHP--that I now need to secure and, for a number of reasons, OAuth seems like the right way to go. Unfortunately, my inability to track down the right resources to help me get a provider up and running is challenging that theory. Since most of this will be system-to-system API usage, I'll need to implement a 2-legged provider. With that in mind... Does anyone know of any good tutorials for implementing a 2-legged OAuth provider with PHP? Given that I have securable APIs in 2 languages, do I need to implement a provider in both or is there a way to create the provider as a "front controller" that I can funnel all requests through? When securing PHP services, for example, do I have to secure each API individually by including the requisite provider resources on each? Thanks for your help.

  Read the article

• New to MVVM - Best practices for seperating Data processing thread and UI Thread?

  - by OffApps Cory

  Good day. I have started messing around with the MVVP pattern, and I am having some problems with UI responsiveness versus data processing. I have a program that tracks packages. Shipment and package entities are persisted in SQL database, and are displayed in a WPF view. Upon initial retrieval of the records, there is a noticeable pause before displaying the new shipments view, and I have not even implemented the code that counts shipments that are overdue/active yet (which will necessitate a tracking check via web service, and a lot of time). I have built this with the Ocean framework, and all appears to be doing well, except when I first started my foray into multi-threading. It broke, and it appeared to break something in Ocean... Here is what I did: Private QueryThread As New System.Threading.Thread(AddressOf GetShipments) Public Sub New() ' Insert code required on object creation below this point. Me.New(ViewManagerService.CreateInstance, ViewModelUIService.CreateInstance) 'Perform initial query of shipments 'QueryThread.Start() GetShipments() Console.WriteLine(Me.Shipments.Count) End Sub Public Sub New(ByVal objIViewManagerService As IViewManagerService, ByVal objIViewModelUIService As IViewModelUIService) MyBase.New(objIViewModelUIService) End Sub Public Sub GetShipments() Dim InitialResults = From shipment In db.Shipment.Include("Packages") _ Select shipment Me.Shipments = New ShipmentsCollection(InitialResults, db) End Sub So I declared a new Thread, assigned it the GetShipments method and instanced it in the default constructor. Ocean freaks out at this, so there must be a better way of doing it. I have not had the chance to figure out the usage of the SQL ORM thing in Ocean so I am using Entity Framework (perhaps one of these days i will look at NHibernate or something too). Any information would be greatly appreciated. I have looked at a number of articles and they all have examples of simple uses. Some have mentioned the Dispatcher, but none really go very far into how it is used. Anyone know any good tutorials? Cory

  Read the article

• Inheriting from ViewPage forces explicit casting of model in view

  - by Martin Hansen

  I try to inhering from ViewPage as shown in this question http://stackoverflow.com/questions/370500/inheriting-from-viewpage But I get a Compiler Error Message: CS1061: 'object' does not contain a definition for 'Spot' and no extension method 'Spot' accepting a first argument of type 'object' could be found (are you missing a using directive or an assembly reference?) My viewpage, normally I can do Model.ChildProperty(Spot) when I inherit from ViewPage directly, so I do that here too. But it fails. <%@ Page Language="C#" Inherits="Company.Site.ViewPageBase<WebSite.Models.SpotEntity>" %> <h1><%= Html.Encode(Model.Spot.Title) %></h1> To get it working correctly I have to do like this: <%@ Page Language="C#" Inherits="Company.Site.ViewPageBase<WebSite.Models.SpotEntity>" %> <h1><%= Html.Encode(((WebSite.Models.SpotEntity)Model).Spot.Title) %></h1> Here is my classes: namespace Company.Site { public class ViewPageBase<TModel> : Company.Site.ViewPageBase where TModel:class { private ViewDataDictionary<TModel> _viewData; [System.Diagnostics.CodeAnalysis.SuppressMessage("Microsoft.Usage", "CA2227:CollectionPropertiesShouldBeReadOnly")] public new ViewDataDictionary<TModel> ViewData { get { if (_viewData == null) { SetViewData(new ViewDataDictionary<TModel>()); } return _viewData; } set { SetViewData(value); } } protected override void SetViewData(ViewDataDictionary viewData) { _viewData = new ViewDataDictionary<TModel>(viewData); base.SetViewData(_viewData); } } public class ViewPageBase : System.Web.Mvc.ViewPage { } } So how do I get it to work without the explicit cast?

  Read the article

• SharePoint 2010 HttpModule problem

  - by Chris W

  I'm trying to write an HttpModule to run on our SharePoint farm - essentially it will check whether the user is authenticated and if they are it will validate some info against another database and potentially redirect the user to sign a variety of usage agreements. Whenever I enable the module in the web.config I'm finding that SharePoint has issues rendering the page - it's almost like the CSS is not getting loaded as the page is devoid of any styling. As a test I've even tried an empty module - i.e. an empty init block so it's not even hooking up any code to any events and the same issue arises. At this point it's an empty class that just implements IHttpModule so it's not even my dodgy coding causing the issue! The module is in a class library that I've dropped in to the bin folder of the application it needs to run against. In the web.config of the app I've simply added an entry as below: <modules runAllManagedModulesForAllRequests="true"> ... (default stuff ommitted) <add name="SharePointAUP" type="SPModules.SharePointAUP" /> </modules> I must be missing something really obvious here as I've done exactly the same as every sample I've found and yet I'm getting this strange behaviour. Is there something extra I need to do to get SharePoint to play nice with a custom module?

  Read the article

• Building Cross Platform app - recommendation

  - by Ben

  Hi, I need to build a fairly simple app but it needs to work on both PC and Mac. It also needs to be redistributable on a disc or usb drive as a standalone desktop app. Initially I thought AIR would be perfect for this (it ticks all the API requirements), but the difficulty is making it distributable, as the app would require the AIR runtime to be installed to run. I came across Shu Player as an option as it seems to be able to package the AIR runtime with the app and do a (silent?) install. However this seems to break the T&C from Adobe (as outlined here) so I'm not sure about the legality. Another option could be Zinc but I haven't tested it so I'm not sure how well it'll fit the bill. What would you recommend or suggest I check out? Any suggestion much appreciated EDIT: There's a few more discussions on mono usage (though no real conclusion): Here and Here EDIT2: Titanium could also fit the bill maybe, will check it out. Any more comments from anyone? Ben

  Read the article

• C++/CLI managed thread cleanup

  - by Guillermo Prandi

  Hi. I'm writing a managed C++/CLI library wrapper for the MySQL embedded server. The mysql C library requires me to call mysql_thread_init() for every thread that will be using it, and mysql_thread_end() for each thread that exits after using it. Debugging any given VB.Net project I can see at least seven threads; I suppose my library will see only one thread if VB doesn't explicitly create worker threads itself (any confirmations on that?). However, I need clients to my library to be able to create worker threads if they need to, so my library must be thread-aware to some degree. The first option I could think of is to expose some "EnterThread()" and "LeaveThread()" methods in my class, so the client code will explicitly call them at the beginning and before exiting their DoWork() method. This should work if (1) .Net doesn't "magically" create threads the user isn't aware of and (2) the user is careful enough to have the methods called in a try/finally structure of some sort. However, I don't like it very much to have the user handle things manually like that, and I wonder if I could give her a hand on that matter. In a pure Win32 C/C++ DLL I do have the DllMain DLL_THREAD_ATTACH and DLL_THREAD_DETACH pseudo-events, and I could use them for calling mysql_thread_init() and mysql_thread_end() as needed, but there seem to be no such thing in C++/CLI managed code. At the expense of some performance (not much, I think) I can use TLS for detecting the "usage from a new thread" case, but I can imagine no mechanism for the thread exiting case. So, my questions are: (1) could .net create application threads without the user being aware of them? and (2) is there any mechanism I could use similar to DLL_THREAD_ATTACH / DLL_THREAD_DETACH from managed C++/CLI? Thanks in advance.

  Read the article

• gcc: Do I need -D_REENTRANT with pthreads?

  - by stefanB

  On Linux (kernel 2.6.5) our build system calls gcc with -D_REENTRANT. Is this still required when using pthreads? How is it related to gcc -pthread option? I understand that I should use -pthread with pthreads, do I still need -D_REENTRANT? On a side note, is there any difference that you know off between the usage of REENTRANT between gcc 3.3.3 and gcc 4.x.x ? When I use -pthread gcc option I can see that _REENTRANT gets defined. Will omitting -D_REENTRANT from command line make any difference, for example could some objects be compiled without multithreaded support and then linked into binary that uses pthreads and will cause problems? I assume it should be ok just to use: g++ -pthread > echo | g++ -E -dM -c - > singlethreaded > echo | g++ -pthread -E -dM -c - > multithreaded > diff singlethreaded multithreaded 39a40 > #define _REENTRANT 1 We're compiling multiple static libraries and applications that link with the static libraries, both libraries and application use pthreads. I believe it was required at some stage in the past but want to know if it is still required. Googling hasn't returned any recent information mentioning -D_REENTRANT with pthreads. Could you point me to links or references discussing the use in recent version of kernel/gcc/pthread? Clarification: At the moment we're using -D_REENTRANT and -lpthread, I assume I can replace them with just g++ -pthread, looking at man gcc it sets the flags for both preprocessor and linker. Any thoughts?

  Read the article

• Do the ‘up to date’ guarantees for values of Java's final fields extend to indirect references?

  - by mattbh

  The Java language spec defines semantics of final fields in section 17.5: The usage model for final fields is a simple one. Set the final fields for an object in that object's constructor. Do not write a reference to the object being constructed in a place where another thread can see it before the object's constructor is finished. If this is followed, then when the object is seen by another thread, that thread will always see the correctly constructed version of that object's final fields. It will also see versions of any object or array referenced by those final fields that are at least as up-to-date as the final fields are. My question is - does the 'up-to-date' guarantee extend to the contents of nested arrays, and nested objects? An example scenario: Thread A constructs a HashMap of ArrayLists, then assigns the HashMap to final field 'myFinal' in an instance of class 'MyClass' Thread B sees a (non-synchronized) reference to the MyClass instance and reads 'myFinal', and accesses and reads the contents of one of the ArrayLists In this scenario, are the members of the ArrayList as seen by Thread B guaranteed to be at least as up to date as they were when MyClass's constructor completed? I'm looking for clarification of the semantics of the Java Memory Model and language spec, rather than alternative solutions like synchronization. My dream answer would be a yes or no, with a reference to the relevant text.

  Read the article

• Symfony / Doctrine - How to filter form field by property in related model

  - by Dan

  I have a UserForm class which has a select list populated from a related model (specified by a foreign relationship in the yml) like so: $this->setWidget('report_id', new sfWidgetFormDoctrineChoice(array('model' => $this->getRelatedModelName('Report')))); I'd like to filter the Report objects that come from this relation by one of the Report fields, "active" such that only Reports with active=1 appear in the form. I have a method, ReportTable::GetActiveReports() that performs the appropriate query and returns the filtered reports. So one option is to populate the Widget with the results of that function. Any tips on the syntax to do that? It seems to me the cleaner way is to use the UserFormFilter class to filter the reports by active=1 there. Unfortunately I couldn't find any documentation on how to use form filters (or really what they are), so maybe this is not the right solution. Is a Form Filter the appropriate tool for this job? It seems I should use the Doctrine_Record_Filter_Standard class as defined here: http://www.doctrine-project.org/api/orm/1.2/doctrine/doctrine_record_filter_standard.html But it's not clear to me the appropriate usage. Any guidance would be helpful. Thanks! Dan

  Read the article

• Incoming connections from 2 different Internet connections

  - by RJClinton

  I am hosting a Gameserver on my Windows 2003 Server 32 Bit Server. Due to some limitations of my ISP, I have to take 2 Internet connections in order to satisfy my bandwidth requirement. I am facing serious problems here. The Internet is supplied using Wimax. I am given a POE and the RJ45 from both the POE (2 connections) are plugged into a Netgear 100mbps Switch and another RJ45 connects the server to the switch. I have tried to configure the IP addresses and gateway of both connections to the single NIC in the server. The IP series and the gateway of each Internet connection are very much different. I know that this is not the proper approach, because alternate gateways are meant to be only for backup in case of main gateway failure and the usage of the gateways depends upon the metric (correct me if I am wrong). I am planning to get a second PCI NIC so that I can connect each of the Internet connections into its respective NIC. If I use this approach, will I be able to accept connections on both NICs? Also, please suggest any other alternatives that I might use.

  Read the article

• What are good NoSQL and non-relational database solutions for audit/logging database

  - by Juha Syrjälä

  What would be suitable database for following? I am especially interested about your experiences with non-relational NoSQL systems. Are they any good for this kind of usage, which system you have used and would recommend, or should I go with normal relational database (DB2)? I need to gather audit trail/logging type information from bunch of sources to a centralized server where I could generate reports efficiently and examine what is happening in the system. Typically a audit/logging event would consist always of some mandatory fields, for example globally unique id (some how generated by program that generated this event) timestamp event type (i.e. user logged in, error happened etc) some information about source (server1, server2) Additionally the event could contain 0-N key-value pairs, where value might be up to few kilobytes of text. It must run on Linux server It should work with high amount of data (100GB for example) it should support some kind of efficient full text search It should allow concurrent reading and writing It should be flexible to add new event types and add/remove key-value pairs to new events. Flexible=no changes should be required to database schema, application generating the events can just add new event types/new fields as needed. it should be efficient to make queries against database. For reporting and exploring what happened. For example: How many events with type=X occurred in some time period. Get all events where field A has value Y. Get all events with type X and field A has value 1 and field B is not 2 and event occurred in last 24h

  Read the article

• User (MS-Office) generated content - how?

  - by Avi

  How can I allow users to share Microsoft Office generated content on an ASP.Net site? For example usage, imagine a site similar to StackOverflow. George, writing a question, uses Word, Excel or OneNote to create content, and then inserts the content into the question area (probably copying it into the clipboard and then using some "paste from office" widget). Harry, who doesn't have MS-Office on his computer, can still see in his browser the content George has generate. If Harry wants to add content, he can use the built in editor, same like in Stackoverflow, and have to be satisfied with lesser functionality. Sue, who has MS-Office installed, can of course see the content in the browser just like Harry. In addition, she can "export" this content and process it in the application George used to generate it. So, how do I do it? Would Save/Export to HTML feature work? Any tools? Samples? Articles? Office 2007 or later is OK.

  Read the article

• Any way for a class to prevent outside code from declaring variables of its type?

  - by supercat

  Is it possible for a class of exposing a type for function returns, without allowing users of that class to create variables of that type? A couple usage scenarios: A Fluent interface on a large class; a statement like "foo=bar.WithX(5).WithY(9).WithZ(19);" would be inefficient if it had to create three new instances of the class, but could be much more efficient if the WithX could create one instance, and the other statements could simply use it. A class may wish to support a statement like "foo[19].x = 9;" even when foo itself isn't an array, and does not hold the data in class instances that can be exposed to the public; one way to do that is to have foo[19] return a struct which holds a reference to 'foo' and the value '19', and has a member property 'x' which could call "foo.SetXValue(19, 9);" Such a struct could have a conversion operator to convert itself to the "apparent" type of foo[19]. In both of these scenarios, storing the value returned by a method or property into a variable and then using it more than once would cause strange behavior. It would be desirable if the designer of the class exposing such methods or properties could ensure that callers wouldn't be able to use them more than once. Is there any practical way to accomplish that?

  Read the article

• MEF = may experience frustration?

  - by Dave

  Well, it's not THAT bad yet. :) But I do have questions after Reed has pointed me at MEF as a potential alternative to IoC (and so far it does look pretty good). Consider the following model: As you can see, I have an App, and this app uses Plugins (whoops, missed that association!). Both the App and Plugins require usage of an object of type CandySettings, which is found in yet another assembly. I first tried to use the ComposeParts method in MEF, but the only way I could get this to work was to do something like this in the plugin code. var container = new CompositionContainer(); container.ComposeParts(this, new CandySettings()); But this doesn't make any sense, because why would I want to create the instance of CandySettings in the plugin? It should be in the App. But if I put it in the App code, then the Plugin doesn't magically figure out how to get at ICandySettings, even though I am using [Import] in the plugin, and [Export] in CandySettings. The way I did it was to use MEF's DirectoryCatalog, because this allows the plugin, when constructed, to scan all of the assemblies in the current folder and automagically import everything that is marked with the [Import] attribute. So it looks like this, and potentially in every plugin: var catalog = new DirectoryCatalog( "."); var container = new CompositionContainer( catalog); container.ComposeParts( this); This totally works great, but I can't help but think that this is not how MEF was intended to be used?

  Read the article

• Perl DBI doesn't work with Oracle 11g

  - by John

  I am getting the following error connecting to an Oracle 11g database using a simple perl script: failed: ERROR OCIEnvNlsCreate. Check ORACLE_HOME (Linux) env var or PATH (Windows) and or NLS settings, permissions, etc. at The script is as follows: #!/usr/local/bin/perl use strict; use DBI; if ($#ARGV < 3) { print "Usage: perl testDbAccess.pl dataBaseUser dataBasePassword SID dataBasePort\n"; exit 0; } my ($user, $pwd, $sid, $port) = @ARGV; my $host = `hostname`; my $dbh; my $sth; my $dbname = "dbi:Oracle:HOST=$host;SID=$sid;PORT=$port"; openDbConnection(); closeDbConnection(); sub openDbConnection() { $dbh = DBI->connect ($dbname, $user ,$pwd , { RaiseError => 1}) || die "Database connection not made: $DBI::errstr"; } sub closeDbConnection() { #$sth->finish(); $dbh->disconnect(); } Anyone seen this problem before? /john

  Read the article

• Command-Line Parsing API from TestAPI library - Type-Safe Commands how to

  - by MicMit

  Library at http://testapi.codeplex.com/ Excerpt of usage from http://blogs.msdn.com/ivo_manolov/archive/2008/12/17/9230331.aspx A third common approach is forming strongly-typed commands from the command-line parameters. This is common for cases when the command-line looks as follows: some-exe COMMAND parameters-to-the-command The parsing in this case is a little bit more involved: Create one class for every supported command, which derives from the Command abstract base class and implements an expected Execute method. Pass an expected command along with the command-line arguments to CommandLineParser.ParseCommand – the method will return a strongly-typed Command instance that can be Execute()-d. // EXAMPLE #3: // Sample for parsing the following command-line: // Test.exe run /runId=10 /verbose // In this particular case we have an actual command on the command-line (“run”), which we want to effectively de-serialize and execute. public class RunCommand : Command { bool? Verbose { get; set; } int? RunId { get; set; } public override void Execute() { // Implement your "run" execution logic here. } } Command c = new RunCommand(); CommandLineParser.ParseArguments(c, args); c.Execute(); ============================ I don't get if we instantiate specific class before parsing arguments , what's the point of command line argument "run" which is very first one. I thought the idea was to instantiate and execute command/class based on a command line parameter ( "run" parameter becomes instance RunCommand class, "walk" becomes WalkCommand class and so on ). Can it be done with the latest version ?

  Read the article

• Books and resources for Java Performance tuning - when working with databases, huge lists

  - by Arvind

  Hi All, I am relatively new to working on huge applications in Java. I am working on a Java web service which is pretty heavily used by various clients. The service basically queries the database (hibernate) and then works with a lot of Lists (there are adapters to convert list returned from DB to the interface which the service publishes) and I am seeing lot of issues with the service like high CPU usage or high heap space. While I can troubleshoot the performance issues using a profiler, I want to actually learn about what all I need to take care when I actually write code. Like what kind of List to use or things like using StringBuilder instead of String, etc... Is there any book or blogs which I can refer which will help me while I write new services? Also my application is multithreaded - each service call from a client is a new thread, and I want to know some best practices around that area as well. I did search the web but I found many tips which are not relevant in the latest Java 6 releases, so wanted to know what kind of resources would help a developer starting out now on Java for heavily used applications. Arvind

  Read the article

• Taking "do the simplest thing that could possible work" too far in TDD: testing for a file-name kno

  - by Support - multilanguage SO

  For TDD you have to Create a test that fail Do the simplest thing that could possible work to pass the test Add more variants of the test and repeat Refactor when a pattern emerge With this approach you're supposing to cover all the cases ( that comes to my mind at least) but I'm wonder if am I being too strict here and if it is possible to "think ahead" some scenarios instead of simple discover them. For instance, I'm processing a file and if it doesn't conform to a certain format I am to throw an InvalidFormatException So my first test was: @Test void testFormat(){ // empty doesn't do anything nor throw anything processor.validate("empty.txt"); try { processor.validate("invalid.txt"); assert false: "Should have thrown InvalidFormatException"; } catch( InvalidFormatException ife ) { assert "Invalid format".equals( ife.getMessage() ); } } I run it and it fails because it doesn't throw an exception. So the next thing that comes to my mind is: "Do the simplest thing that could possible work", so I : public void validate( String fileName ) throws InvalidFormatException { if(fileName.equals("invalid.txt") { throw new InvalidFormatException("Invalid format"); } } Doh!! ( although the real code is a bit more complicated, I found my self doing something like this several times ) I know that I have to eventually add another file name and other test that would make this approach impractical and that would force me to refactor to something that makes sense ( which if I understood correctly is the point of TDD, to discover the patterns the usage unveils ) but: Q: am I taking too literal the "Do the simplest thing..." stuff?

  Read the article

• MySQL performance

  - by kapil.israni

  Hi, I have this LAMP application with about 900k rows in MySQL and I am having some performance issues. Background - Apart from the LAMP stack , there's also a Java process (multi-threaded) that runs in its own JVM. So together with LAMP & java, they form the complete solution. The java process is responsible for inserts/updates and few selects as well. These inserts/updates are usually in bulk/batch, anywhere between 5-150 rows. The PHP front-end code only does SELECT's. Issue - the PHP/SELECT queries become very slow when the java process is running. When the java process is stopped, SELECT's perform alright. I mean the performance difference is huge. When the java process is running, any action performed on the php front-end results in 80% and more CPU usage for mysqld process. Any help would be appreciated. MySQL is running with default parameters & settings. Software stack - Apache - 2.2.x MySQL -5.1.37-1ubuntu5 PHP - 5.2.10 Java - 1.6.0_15 OS - Ubuntu 9.10 (karmic)

  Read the article

• Get most left|right|top|bottom point contained in box

  - by skyman

  I'm storing Points Of Interest (POI) in PostgreSQL database, and retrieve them via PHP script to Android application. To reduce internet usage I want my mobile app to know if there are any points in the neighborhood of currently displayed area. My idea is to store bounds of the rectangle containing all points already retrieved (in other words: nearest point on the left (West) of most west already retrieved, nearest point above (North) of most north already retrieved etc.) and I will make next query when any edge of screen goes outside of this bounds. Currently I can retrieve points which are in "single screen" (in the area covered by currently displayed map) using: SELECT * FROM ch WHERE loc <@ (box '((".-$latSpan.", ".$lonSpan."),(".$latSpan.", ".-$lonSpan."))' + point '".$loc."') Now I need to know four most remote points in each direction, than I will be able to retrieve next four "more remote" points. Is there any possibility to get those points (or box) directly from PostgreSQL (maybe using some "aggregate points to box" function)?

  Read the article

• Long running stats process - thoughts on language choice?

  - by Josh

  I am on a LAMP stack for a website I am managing. There is a need to roll up usage statistics (a variety of things related to our desktop product), and I initially tackled the problem with PHP (being that I had a bunch of classes to work with the data already). All worked well on my dev box which was using 5.3 Long story short, 5.1 memory management seems to suck a lot worse, and I've had to do a lot of fooling to get the long term roll up scripts to run in a fixed memory space. Our server guys are unwilling to upgrade php at this time. I've since moved my dev server back to 5.1 so I don't run into this problem again... For mining of mysql databases to roll up statistics for different periods and resolutions, potentially running a process that does this all the time in the future (as opposed to on a cron schedule), what language choice do you recommend? I was looking at python (I know it more or less), java (don't know it that well), sticking it out with php (know it quite well). Thanks for any suggestions. Josh

  Read the article

• using ghostscript in server mode to convert pdfs to pngs

  - by emh

  while i am able to convert a specific page of a PDF to a PNG like so: gs -dSAFER -dBATCH -dNOPAUSE -sDEVICE=png16m -dGraphicsAlphaBits=4 -sOutputFile=gymnastics-20.png -dFirstPage=20 -dLastPage=20 gymnastics.pdf i am wondering if i can somehow use ghostscript's JOBSERVER mode to process several conversions without having to incur the cost of starting up ghostscript each time. from: http://pages.cs.wisc.edu/~ghost/doc/svn/Use.htm -dJOBSERVER Define \004 (^D) to start a new encapsulated job used for compatibility with Adobe PS Interpreters that ordinarily run under a job server. The -dNOOUTERSAVE switch is ignored if -dJOBSERVER is specified since job servers always execute the input PostScript under a save level, although the exitserver operator can be used to escape from the encapsulated job and execute as if the -dNOOUTERSAVE was specified. This also requires that the input be from stdin, otherwise an error will result (Error: /invalidrestore in --restore--). Example usage is: gs ... -dJOBSERVER - < inputfile.ps -or- cat inputfile.ps | gs ... -dJOBSERVER - Note: The ^D does not result in an end-of-file action on stdin as it may on some PostScript printers that rely on TBCP (Tagged Binary Communication Protocol) to cause an out-of-band ^D to signal EOF in a stream input data. This means that direct file actions on stdin such as flushfile and closefile will affect processing of data beyond the ^D in the stream. the idea is to run ghostscript in-process. the script would receive a request for a particular page of a pdf and would use ghostscript to generate the specified image. i'd rather not start up a new ghostscript process every time.

  Read the article

< Previous Page | 189 190 191 192 193 194 195 196 197 198 199 200  | Next Page >