Search Results

Search found 7065 results on 283 pages for 'cpu sockets'.

Page 194/283 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• PC doesn't power up anymore

  - by Andrew

  I will tell you the story behind the problem. The computer needed to be reinstalled, it has 2 HDDs so I had to un-plug one to see which is which, to save as much data as possible. After unplugging the first one, it booted with the reinstallation CD, it wasn't the HDD I was looking for so I turned it off and unplugged the other one. After unplugging and turning on, right after booting test, the HDD was turned off, only the CPU fan was working. Turned it off with the power supply's button help, holding the power button didn't do it. And now it doesn't want to turn on anymore. I tried with another test power supply but the result is the same, doesn't want to turn on. Any idea?

  Read the article

• laptop suddenly became very slow

  - by Ieyasu Sawada

  I have a compaq laptop. And I've been using it 2 years now. Then this day, it suddenly became very slow. It almost took 5 minutes from turning on to the log on screen. I click my username and it took 3 minutes to show the desktop. I click on my computer then properties to see if it is still showing 2 Ghz for the Core 2 duo processor. And 2gb for the memory. It took 10 minutes for all the information to show up. And its still 2gb and 2Ghz. So I may conclude that this is not a problem in memory or cpu. Its still running perfectly last night. And I have not seen signs of it failing. Things I already tried: Rebooting Shutdown then turn on again So how do I determine what causes this problem? How do I fix it?

  Read the article

• Active Directory Profile Slows down machine

  - by boburob

  I have a strange issue with an Active Directory profile. When the user logs onto a machine with his profile, the whole machine becomes incredibly slow and unresponsive, with programs hanging and taking an age to load everything. If I log into the same machine with any other profile nothing happens. I took a look at his original profile, any start up programs, login scripts, etc and could not see what could be causing this. The machine is not running out of memory or CPU. Nothing strange is appearing in the event log and I can see nothing running under his profile which may cause this. So I created the user a new profile to test this on and exactly the same thing happens on the first login. The only thing which would of been carried across is the security groups the user is assigned to, yet I have other users with the same groups who do not experience these issues so I am now at a complete loss on where to go next!

  Read the article

• Amazon EC2- micro-instance vs single small/medium instance

  - by shashankaholic

  I have a chat application using stack of Openfire, Tomcat6 and MySQL. Currently, i have installed all these servers on single Linux micro-instance(613 MB memory). Even in low user base 10-20 i am encountering CPU overload which is quite obvious here. As, i am new to Amazon EC2 can somebody suggest me how to scale up my architecture according to traffic use? should i use separate micro instances for every app server(openfire,mysql,tomcat6) should i use single small or medium instance for whole server stack. Some factors in context: high reliance on MYSQL high memory usage due to file transfer web-application interacting with other Amazon service like S3,SES

  Read the article

• Troubleshoot IIS 6 and Intermittent SQL Server Connectivity Loss

  - by jpsnow

  I am not a System Administrator, but I am temporarily trying to fill that role. I have 2 Windows 2003 Servers. 1 server has my Microsoft SQL Database (SQL Server 2005) and the other is the web server with IIS6. Intermittently (once every month or 2) the web server loses connectivity to the database server for a period of roughly 10 minutes. It normally regains connectivity without intervention. The website is set up to send me an email when there is a problem connecting to the database. Within the email, I get the error code: [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied. I am able to access both servers during the outage. I can go to my SQL server and open up SQL server without any issues. I have looked in the EventViewer and do not see anything. The last time that I had this issue, I stopped IIS6 and started it. After doing this, the issue was resolved. This leads me to believe that it is an issue with IIS and not SQL server. How can I begin troubleshooting?

  Read the article

• How to know if my nginx is in good health?

  - by Howard

  I am running a nginx on EC2 (m1.small) for SSL termination. I am using 2 workers on Ubuntu, with latest nginx (stable), the network throughput is around 2Mbps and system load average is around 2 to 3. I am wondering if this system is in good health for now, e.g. what is the queue length (I know nginx can handle a lot of concurrent request, but I mean before the request is being served, how many of them need to wait before being served) what is the average queue time for a given request to be served. I want to know because if my nginx is cpu bounded (e.g. due to SSL), I will need to upgrade to a faster instance. My current nginx status Active connections: 4076 server accepts handled requests 90664283 90664283 104117012 Reading: 525 Writing: 81 Waiting: 3470

  Read the article

• Corrupt mysql system tables

  - by psynnott

  I am having issues with the columns_priv table in the mysql system database. I cannot add new users currently. I have tried repairing it using mysqlcheck --auto-repair --all-databases --password but I get the following output: mysql.columns_priv Error : Incorrect file format 'columns_priv' error : Corrupt Is there any other way to repair this table, or how do I go about replacing it with a blank table? What would I lose by doing that? Thank you Edit (Additional Info) mysqld is currently using 100% cpu constantly. Looking at show processlist, I get: mysql> show processlist; +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ | 5 | debian-sys-maint | localhost | mysql | Query | 1589 | Opening tables | ALTER TABLE tables_priv MODIFY Column_priv set('Select','Insert','Update','References') COLL | | | 752 | root | localhost | NULL | Query | 0 | NULL | show processlist | +-----+------------------+-----------+-------+---------+------+-------------------+------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• NTFS write speed really slow (<15MB/s)

  - by Zulakis

  I got a new Seagate 4TB harddrive formatted with ntfs using parted /dev/sda > mklabel gpt > mkpart pri 1 -1 mkfs.ntfs /dev/sda1 When copying files or testing writespeed with dd, the max writespeed I can get is about 12MB/s. The harddrive should be capable of atleast 100MB/s. top shows high cpu usage for the mount.ntfs process. The system has a AMD dualcore. This is the output of parted /dev/sda unit s print: Model: ATA ST4000DM000-1F21 (scsi) Disk /dev/sda: 7814037168s Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 2048s 7814035455s 7814033408s pri The used kernel is 3.5.0-23-generic. The ntfs-3g versions I tried are ntfs-3g 2012.1.15AR.1 (ubuntu 12.04 default) and the newest version ntfs-3g 2013.1.13AR.2. When formatted with ext4 I get good write speeds with about 140MB/s. How can I fix the writespeed?

  Read the article

• Out Of Memory Error - Magento

  - by robobobobo

  Ok normally I understand when my server is giving me out of memory errors, but this one has me stumped! I'm running a magento based site, with one or two plugins in it and the rest is pretty basic. The site runs and loads fine wiht no issues. However in the backend - Configuration - Payment Methods it gives me the following out of memory error Fatal error: Out of memory (allocated 39059456) (tried to allocate 85 bytes) in ########/Varien/Simplexml/Element.php on line 84 Now this is where I'm confused..it's allocated more than it tried to allocate? Am I correct there? So how is it running out of memory? My server has 6Gb ram, an SSD and 2 CPU's running WHM with a few other low traffic sites on it. I set my php memory limit to 100mb, 1000mb and finally unlimited but all to no avail! I'm completely lost here, would really appreciate some expertise on this Cheers

  Read the article

• Where should I plug in my monitor -- Motherboard or Graphics card?

  - by Jeremy White

  Assuming I am using the following equipment... motherboard with HDMI/DVI & no embedded graphics discrete graphics card (nVidia or ATI) on PCI-E slot Intel CPU with integrated graphics ...where should I plug my monitor into the computer? Presumably, I'll get the fastest speed on games connected directly to the graphics card. But there is also power savings when connecting to the motherboard and accessing the Intel on-board graphics. I've read that some motherboards can switch automatically between the Intel graphics and discrete graphics. Is that something that works well, and where do I connect the monitor to enable that?

  Read the article

• How do I tell if my Windows server is swapping?

  - by churnd

  I'm using Process Explorer to monitor my windows server while it reconstructs some data. It's primarily a CPU intensive process, but I want to make sure it's not swapping. How can I tell if it is using Process Explorer? My initial guess is in the System Information window, it's Paging File Write Delta. Yes? No? I'm an idiot? *Screenshot is not of the server... just an example.

  Read the article

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• Bios wont post unless I restart power supply.

  - by remy

  I have an annoying problem with a computer. The BIOS wont post after it has been turned off and started again unless I turn the switch off/on on the power supply. The fans, cdrom hdd and everything starts running but the bios never beeps and the monitor stays black. I HAVE TRIED: reinstalling windows xp, flashed bios to latest, cmos clear, new power supply, other hdd, new memory sticks, graphics card. I also removed the motherboard from the computer case and laid it on a cardboard box and only connected the PSU, RAM and CPU. Other than this the computer works great but its annoying having to off/on the power supply switch before turning it on after its been off. My guess is that the motherboard is faulty but I would just like to hear what you guys think. Sorry for my english / Remy

  Read the article

• Open Source Visualization and Dashboard Software

  - by helios

  I am working on an open source Application Performance Monitoring (APM) software and looking for a visualization tool with dashboard capabilities. I came across Graphite which looks pretty good but wondering if there is anything better out there before I settle down with that tool. Here's the list of features I am interested in: Must-Have Open Source license API to submit real time data Web-based visualization interface Persistence - file or database Nice-To-Have Dashboard Capabilities: Allow users to select a few metrics (CPU, Heap Usage, # of Active Users etc.) and place them on a single page for easier monitoring. Any suggestions?

  Read the article

• Virtualbox and getting the Locked VT-x Error when trying to use more than 1 processor on the session

  - by Dave

  I have installed the latest version of virtualbox onto my Hewlett Pakard (h8-1170uk) I have a intel i7 2600 cpu and 8 gb of ram I can get virtual box to create several sessions of different operating systems at the same time, but whenever i try to get 1 session to open up using more than 1 processor option select ( i wanted one of my session access to 2 processors ) i keep getting this error message VT-x features locked or unavailable in MSR. (VERR_VMX_MSR_LOCKED_OR_DISABLED). Result Code: E_FAIL (0x80004005) Component: Console Interface: IConsole {1968b7d3-e3bf-4ceb-99e0-cb7c913317bb} I have search many times and cannot find a option to correct this. I have check my BIOS and there are no options about VT-x or Virtualisation or anything. Am i doing something wrong ? Why does Virtualbox run fine when just using the 1 processor option ?

  Read the article

• Apache worker is crashing after 3.000 users

  - by user1618606

  I activated Apache Worker on my VPS and I'm having problems, 'cause the website is crashing when 3000 users are accessing the website. I'm using http://whos.amung.us/stats/2jzwlvbhvpft/ as counter. My Apache Worker configuration: KeepAlive On MaxKeepAliveRequests 0 KeepAliveTimeout 1 <IfModule mpm_worker_module> ServerLimit 20000 StartServer 8000 MinSpareThreads 10400 MaxSpareThreads 14200 ThreadLimit 5 ThreadsPerChild 5 MaxClients 20000 MaxRequestsPerChild 0 </IfModule> The VPS have the SO: Debian 64 LAMP, memory: 14gb and CPU: 24ghz What I could to do to give a best performance?

  Read the article

• Problem identifying which page/page/function locks whole IIS server

  - by fnovak

  Hello, I have problem identifying which page/page/function locks whole IIS server. Out of the blue whole w3wp.exe jumps to CPU 90-98% usage. I have created 3 different application pools to see which w3wp.exe service locks the processor but I am unable to find out this information. I can only see that 2 of 3 services have 0-5% usage and one is jumping around 90-98% after some while. I think some process/function/redirect/sql is doing this but I would like to eliminate it. So far I am not even able to find the source of the problem. On my local development machine with VS2010 everything works like charm and I am unable to replicate problem. The server is windows 2k3 web server, sql server 2k5 and .net 4.0 Thank you for your help, links or any information on this issue. Fero

  Read the article

• Pentium 4 Computer Won't Power Up

  - by Harvey

  I have a faulty Pentium 4 workstation with data that I would like to retrieve. Here are the symptoms & what I've done so far: Machine is totally dead. Motherboard LED is lit but that is the only sign of life. I have replaced the power supply and bypassed the on/off switch. Tried a PC Analyzer motherboard tester but didn't have any power to the card. Unpluggged the P4 cable from the motherboard, hit the on/off switch, the power supply fan comes on and I get codes from the analyzer but nothing that seems to be of any value. Machine does not boot. Will not shut down by hitting the switch. Bad motherboard or could it be a bad CPU cooling fan?

  Read the article

• Is mumble safe (privacy wise)?

  - by AnonymousLurker

  When chatting on IRC, it is possible to leak data like OS, CPU type if the IRC client happens to leak it in VERSION string. Anybody doing /CTCP VERSION can see it. Same about timezone (/CTCP TIME). This can be mitigated by turning replies to CTCP queries off. Also, IP address is leaked to others (/whois nickname will show it if it's not cloaked). By analogy, does the mumble client expose such sensitive data to others that are connected to the same server? If it does, what are the ways to mitigate this?

  Read the article

• Is there a limit on the number of USB external drives?

  - by Beska

  I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

  Read the article

• Nginx order of servers

  - by scrat

  I have 3 sites on my server. All are running on gunicorn and use unix sockets to communicate with nginx which routes requests. I got three records in nginx.conf like: server { listen 80; server_name site1.com; location / { proxy_pass http://unix:/tmp/site1.sock; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } For site1, site2, site3. If they are ordered as config for site1 goes first, and then goes config for site2 and site3 everything works good. But when I change the order for example to site2, site1, site3, then site1 becomes routed to site2. What am I doing wrong? Full server nginx.conf before servers configs: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } http { ## # Basic Settings ## sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 65; types_hash_max_size 2048; include /etc/nginx/mime.types; default_type application/octet-stream; ## # Logging Settings ## access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; ## # Gzip Settings ## gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon;

  Read the article

• teamviewer display is slow to refresh

  - by brunoais

  I'm using teamviewer from time to time to connect my portable computer with my desktop computer when I need to check on something (personal use). One of the main things I've been noticing is that it is quite slow transfering the screen updates that keep happening. This happens more frequently when I'm moving full windows or when I open a window or when watching a small movie clip. I've tested the lowest maximum p2p speed I ever got in the last week between both and it is the desktop's upload speed of 6MB/s with the ping of 40ms (usually ~15 ms). With this I was expecting to have very sharp image and fast transfer speeds which is not what is happening. Just to clarify, both computer's individual core's CPU is not reaching its peak (25%) while teamviewer is active, so the encryption and decryption is not the cause. Why my connection between both computers so slow?

  Read the article

• What are best monitoring tool customizable for cluster / distributed system?

  - by Adil

  I am working on a system having multiple servers. I am interested in monitoring some server specific data like CPU/memory usage, disk/filesystem usage, network traffic, system load etc. and some other my process specific data. What are available open source that can serve my purpose? If it provides to customize the parameter to be monitored and monitor your own data by creating plugin / agent. Any suggestions? I heard of Nagios, Zabbix and Pandora but not sure if they provide such interface.

  Read the article

• Why do some software not get load balanced even when there are multiple cores?

  - by Nav

  While VTune Analyzer was running on a blade server with 8 cores, I observed the cpu useage percentage using mpstat -P ALL 1. mpstat showed me that VTune was taking up 100% of a single core, while all other cores were idle. Why does that happen? Shouldn't the OS (RHEL Server 5.2) automatically distribute load across cores? The same happened when I tried running MATLAB (even after enabling multithreading support in the MATLAB settings). p.s: I'm a developer. Not a sys admin. So felt it better to ask here rather than at serverfault.

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >