Search Results

Search found 7065 results on 283 pages for 'cpu sockets'.

Page 199/283 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• Games + Closed Lid = Hibernation

  - by Isaac Rabinovitch

  I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

  Read the article

• after building in more ram, bios/debian does nothing [closed]

  - by derty

  My private server has 2x1gb Ram working with a 64bit Debian and an Q6600 Intel. This runs 2 virtual mashines on it each one recives 512mb RAM. Which you can immagine is a bit tight for the hole system. Now i got 2x2gb ram from a friend. I'm not sure if thery are clocking at the same speed, but i'm sure my power adaptor is not on his limit and can handle that. So there are 2 ram sockets left at the mainboard. I shuted down the system and build in the 4 gigs and looked what happen. After pressing the start button, everything gets noisy as known BUT the screen shows nothing, not even the bios stuff it usally does. Why isn't the system booting? I can immagine that it does not direkt link between booting debian and the bios not showing a thing. Or is it Grub? I mounted the system disk, and i can see it, switch folders write stuff with "vim" it does not seems like there is a problem.

  Read the article

• Improve efficiency when using parallel to read from compressed stream

  - by Yoga

  Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

  Read the article

• MySQL Optimizing

  - by Thoman

  Hello My web use an dedicated Intel(R) Xeon(R) CPU E5620 8core 12Gram Centos32bit/Driectadmin DISK SAS 80G Php-cgi This dedicated running one website Use wordpress 2.92(+plugin cache...) Database size 600MB only 100online But mywebsite runing very snow. please hep me config file my.cnf [mysqld] user=mysql key_buffer=128M set-variable = max_connections=1000 socket = /var/lib/mysql/mysql.sock key_buffer =32M table_cache = 1024 open_files_limit = 16344 join_buffer_size = 8M read_buffer_size = 8M sort_buffer_size = 8M tmp_table_size=512M read_rnd_buffer_size=8M max_heap_table_size=256M #myisam_sort_buffer_size=256M thread_cache_size=8 thread_cache=32 query_cache_type=1 query_cache_limit=1024M query_cache_size=1024M thread_concurrency = 16 wait_timeout = 10 connect_timeout = 10 interactive_timeout = 10 long_query_time=1 log-slow-queries = /var/log/mysqlslowqueries.log max_allowed_packet=32M skip-innodb [myisamchk] key_buffer = 64M sort_buffer = 64M read_buffer = 16M write_buffer = 16M [isamchk] key_buffer=64M sort_buffer=64M read_buffer=16M write_buffer=16M And apache

  Read the article

• Can't ssh from CentOS 6.5 to SUSE LINUX 10.1

  - by Pavel Tankov

  We have a quite old installation of SUSE LINUX 10.1 (i586) in the office. The problem shortly: I can successfully ssh to it from machines in the same LAN (192.168.1.0) and not from others (that are in 10.23.0.0). The SuSE has SSH server openssh-4.2p1-18.12. I have ruled out the firewall and hosts.allow and hosts.deny files. When my ssh login attempt fails, here is what the logs say: on the client: $ ssh -vvv 192.168.1.5 OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.1.5 [192.168.1.5] port 22. debug1: Connection established. debug1: identity file /home/nbuild/.ssh/identity type -1 debug1: identity file /home/nbuild/.ssh/identity-cert type -1 debug1: identity file /home/nbuild/.ssh/id_rsa type -1 debug1: identity file /home/nbuild/.ssh/id_rsa-cert type -1 debug1: identity file /home/nbuild/.ssh/id_dsa type -1 debug1: identity file /home/nbuild/.ssh/id_dsa-cert type -1 on the server: Aug 21 16:34:25 serverhost sshd[20736]: debug3: fd 4 is not O_NONBLOCK Aug 21 16:34:25 serverhost sshd[20736]: debug1: Forked child 20739. Aug 21 16:34:25 serverhost sshd[20736]: debug3: send_rexec_state: entering fd = 7 config len 403 Aug 21 16:34:25 serverhost sshd[20736]: debug3: ssh_msg_send: type 0 Aug 21 16:34:25 serverhost sshd[20736]: debug3: send_rexec_state: done Aug 21 16:34:25 serverhost sshd[20739]: debug1: rexec start in 4 out 4 newsock 4 pipe 6 sock 7 Aug 21 16:34:25 serverhost sshd[20739]: debug1: inetd sockets after dupping: 3, 3 Aug 21 16:34:25 serverhost sshd[20739]: debug3: Normalising mapped IPv4 in IPv6 address Aug 21 16:34:25 serverhost sshd[20739]: Connection from 10.23.1.11 port 44340 The above log on the server is when I enable DEBUG3 log level. However, with the default log level (INFO), the only thing the server logs is this: Aug 21 16:38:32 serverhost sshd[20749]: Did not receive identification string from 10.23.1.11 Any hints? I feel I've tried everything already.

  Read the article

• Load on Ubuntu 8.04 LTS high

  - by Paddington

  My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

  Read the article

• Install Windows with QEMU

  - by Radium

  I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

  Read the article

• Windows 7 extremely long startup

  - by Tyler

  Windows 7 before it even gets to login. On the "starting windows" splash screen takes no less than 15 minutes to finish more like 25 minutes most times. During this time the hard drive activity led indicator is blinking maybe once every 20 seconds. When I finally get to the desktop everything runs normally. I have unplugged all peripherals with same result. Ideas? It's 32bit. 4gig memory. Fast CPU which I can't recall off the top of my head.

  Read the article

• Apache stops serving requests when connections increase

  - by Gunjan

  The values for MaxClients, ServerLimit etc parameters are quite high (4000). Available RAM on the server is high too (~8G). Load average remains below 1 on a 24 core CPU. But when the number of visitors on the website increase apache just stops serving requests. The apache error log is blank and access log shows no more requests coming in. Restarting apache makes it work again until the number of requests increases again. Any ideas where to start looking? UPDATE Getting the below errors in apache error log on running it with LogLevel Debug [info] server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers), spawning 32 children, there are 479 idle, and 1027 total children

  Read the article

• transparently set up Windows 7 as remote workstation

  - by Áxel

  Maybe is a very basic question, but I can't find the exact terms to Google for it and find the concrete answer to my doubt. Suppose we have several PCs in which individual employees work. One of them has an extremely powerful CPU, and it's very useful to use that computer to perform heavy computations, but go there and set up your task means its user has to stop working for a while. Is it possible to allow a secondary user account to remotly log in, for example via Remote Desktop, and work with a full user environment, while the main user keeps working under his user session? I've used remote desktop many times in the past, but it always blocked current user session, or even terminated it. Lots of thanks in advance guys.

  Read the article

• How can I fix a computer that is literally too slow to do anything?

  - by fredley

  I'm troubleshooting a Windows 7 PC for a friend. A couple of days ago it started running 'slow'. It turns out 'slow' is about 15 minutes to the first glimpse of the desktop, and another 30 to show icons. It is possible to open Task Manager, and nothing seems awry, CPU usage at 1-5%, plenty of memory free. The machine is clearly infested with malware though, in particular a program called 'Optimizer Pro' is demanding money to 'remove 5102 files slowing down my computer'. This seems highly suspicious. My problem is though, that I can't access msconfig (I left it for a couple of hours after having hopefully typed it into the Start Menu and hit enter - nothing seems to have loaded), or anything at all basically. I can boot from a Linux Live CD, but can I actually do anything useful from there? System Restore hasn't fixed it either, and Safe Mode exhibits the same behavior.

  Read the article

• Building a workstation computer for Image processing? [closed]

  - by echolab

  I am taking a gigapixel image my goal is 50gigapixel and shooting is almost done , i am doing some research to build a workstation so i can stitch images together , my questions is ! Could u suggest some dual cpu mainboard that works fine with xeon 5500+ , with 64GB+ ram support ? My other question is which hardware is most important in image processing , all i see in story of gigapixel panoramas is they have dual xeon and 32gb+ ram ? i wonder if i am doing this right , i mean they don't post information on graphic card , mainboard and stuff ! I did asked several websites , but nothing best answer was get some high-end workstation and plenty of hours , i don't want to purchase ready to use workstations, i wanna build it up Thanks in advance

  Read the article

• Improving sound quality with remote ESD server

  - by cuu508

  Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

  Read the article

• How does the performance of pure Nginx compare to cpNginx?

  - by jb510

  There is now a Cpanel plugin to fairly easily setup Nginx as a reverse proxy on a Cpanel/Apache server. I've been simultaneously interested in setting up my first unmanaged VPS and my first Nginx server and as a masochist figured why not combine the two. I'm wondering however if it's worth setting up a pure Nginx server vs trying out cpNginx on Apache? My goal is solely to host WordPress sites and while what I've read raves about Nginx's is exceptional ability serving static at least as a reverse proxy, I am unclear if there is substantial benefit to running a pure nginx with eAccelorator over cpNginx on Apache for dynamic sites? Regardless I'll be running W3TC on all sites to cache content, but am still interested if there are big CPU reductions running PHP scripts under pure Nginx over cpNginx?

  Read the article

• Offer me an ASP.NET & a SQL Server 2008 server specifications for about 2000 concurrent users, please.

  - by amkh

  We have a web application project wich will be created using ASP.NET 4.0, Entity Framework, and SQL Sever 2008 R2. To meet the needs, suppose a normal page of this application that has a query which it takes 10 miliseconds to response on a Core2 Quad @ 2.8GHz proccessor with 2x2GB of DDR3 Ram (EntityFramework overheads are considered). And we will have about 2000 concurrent user at peek times. So, what is the best recommended specifications (CPU/RAM/RAID/...) for the server which will be host this application? -- Or -- How can I calculate that?

  Read the article

• Windows freezes, showing a random color or pattern

  - by Manu

  I have a PC with windows 7, and I'm experiencing random freezes with increasing frequency. After some time (from 30 minutes to a few hours) the screen will shows a random color or pattern (vertical lines) and nothing works anymore, I need to reboot manually. I've checked the events log, but nothing is shown except for the unexpected reboot. I've tested the RAM with Memtest86+ 4.20, and the graphics card with FurMark 1.10.3, no errors have been found. I've updated the graphic drivers and openned the case to remove dust, but the issue is still there. Also, the problem doesn't seem to arise when I'm playing games fullscreen, but when I'm surfing the web, using itunes, or coding. My hardware is as follows : intel core i5 750 CPU, ATI Radeon HD 5670 graphics card, ASUSTeK P7P55D motherboard, two 2Gb KINGSTON DDR3 ram sticks, 2 SATA hard drives, a Netgear dongle for wifi.

  Read the article

• I know this is a stupid question but... How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• How many websites can my server potentially hold?

  - by Daniel Kindler

  Sorry for the "noob" question, but... About how many medium-sized websites with average traffic could this server hold? Just like the average website, kind of like a small business site. How many sites could this server hold, but still maintain nice, decent speed? PowerEdge R510 PE R510 Chassis for Up to Four 3.5" Cabled Hard Drives, LED edit Processor Intel® Xeon® E5630 2.53Ghz, 12M Cache,Turbo, HT, 1066MHz Max Mem edit Memory 8GB Memory (4x2GB), 1333MHz Single Ranked UDIMMs for 1 Procs, Optimized edit Operating System SUSE Linux Enterprise Server 10, SP3, Up To 32 CPU Lic, 1 YR Sub, DIB, Media edit Red Hat Enterprise Linux Licensing Hard Drives 250GB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 1TB 7.2K RPM SATA 3.5" Cabled Hard Drive edit Hard Drives 2 X 2TB 7.2K RPM SATA 3.5in Cabled Hard Drive Hard Drive Configuration No RAID, Embedded SATA Controller for x4 Chassis edit Power Supply 480 Watt Non-Redundant Power Supply edit Thank you!

  Read the article

• Git completion __git_ps1 really slow on Mac

  - by mckeed

  I've had __git_ps1 in my bash prompt for a while, but just recently (I noticed it after I did some messing around with Homebrew and rbenv), it has slowed down my prompt horribly. When I'm in a git directory I have to wait 3-4 seconds after every command for the prompt to appear. If I just mash return and watch the Activity Monitor, it shows that distnoted and Finder are using more CPU than normal during the delay. Could something git-completion.bash is doing be triggering a notification to Finder? Maybe it involves folder actions or something?

  Read the article

• Fedora 16 Running Hot

  - by sdasdadas

  Since switching from Windows 7 to Fedora 16, my laptop has been running incredibly hot (by the air exhaust). The laptop is an Asus K73S. Running 'sensors', I receive: acpitz-virtual-0: 75.0 celsius nouveau-pci-0100: 66.0 celsius asus-isa-0000: 75.0 celsius The only CPU hog is Firefox at 30 - 40% on average. My GPU information (from lspci) is: Intel Corporation Xeon E3-1200/2nd Generation Core Process or Family Integrated Graphics Controller (rev 09). Running lspci | grep -i VGA, returns: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [GeForce GT 555M SDDR3] (rev a1) I don't notice a huge difference running without the battery, but it does seem a little cooler. Thanks!

  Read the article

• VPS stops responding every now and again

  - by Or W

  I have a Linode vps that I use to host some of my websites on. It's Ubuntu based and it's up to date in terms of all packages. I don't have any cron jobs scheduled or any automatic processes. I host a few (up to date) wordpress blogs there that have very little traffic altogether. Every day (at a different time) my server stops responding, I can't SSH to it, web access is getting timed out and it just dies until I reboot it through the Linode manager. On the linode dashboard I can see that the CPU is not very high (2-3%) Incoming/Outgoing traffic is on 0 and the IO count has a spike just before the server stops responding (SWAP IO is at 2k and IO Rate is at 5k). When I reboot the server everything is just fine. I'm trying to figure out a way to analyze what's going on at these random times where the server freezes up. How can I determine the problem?

  Read the article

• Problems with the backup

  - by marcodv

  I did a script which run around 4 o'clock in the morning, for backup all the mysql databases and the config file for 250 linux vm. The problem is that it tooks ages for complete and more than 50% of these vm, need more than 8 hours for complete. More or less all the vm had the same configuration,I mean Same amount of ram same amount of disk space same number of cpu Debian 6.0.5 I am saving these backup on amazon s3, because is the cheapest solutions that I've found. Now my questions is: Has anyone some solutions or suggestions about that? On one blog I've read that probably the ionice and nice combination could be good work around about that. any thought?

  Read the article

• What is the typical maximum number of database connections for Oracle running on Windows server ?

  - by Sake

  We are maintaining a database server that serve a large number of clients. Each client typically running serveral client-applications. The total number of connections to the database server (Oracle 9i) is reaching 800 connections on peak load. The windows 2003 server is starting to run out of memory. We are now planning to move to 64bit Windows in order to gain higher memory capability. As a developer I suggest moving to multi-tier architecture with conneciton pooling, which I believe is a natural solution to this problem. However, in order to support my idea, I want the information on: what exactly is the typical number of connections allowed for Oracle database ? What is the problem when the number connections is too high ? Too much memory comsumption ? or too many sockets opened ? or too many context switching between threads ? To be a little bit specific, how could Oracle Forms application scale to thousand of users without facing this problem ? Shall Oracle RAC applied to this case ? I'm sure the answer to this question should depend on quite a number of factors, like the exact spec of the hardware being used. I'm expecting a rough estimation or some experience from the real world.

  Read the article

• Dynamically changing one-node Cassandra cluster to two nodes

  - by Jason Axelson

  So I have an application that will be very dormant most of the time but will need high-bursting a few days out of the month. Since we are deploying on EC2 I would like to keep only one Cassandra server up most of the time and then on burst days I want to bring one more server up (with more RAM and CPU than the first) to help serve the load. What is the best way to do this? Should I take a different approach? Some notes about what I plan to do: Bring the node up and repair it immediately After the burst time is over decommission the powerful node Use the always-on server as the seed node My main question is how to get the nodes to share all the data since I want a replication factor of 2 (so both nodes have all the data) but that won't work while there is only one server. Should I bring up 2 extra servers instead of just one?

  Read the article

• Isn't ethernet used for LAN?

  - by Alraxite

  I'm not really knowledgeable about networking stuff, hence the stupid question. I read that ethernet was used for LAN connections but I'm pretty sure what I'm currently using to connect to the internet is 'ethernet'. The only knowledge that I have about networking is that there are two types of internet connections: Dial-up and broadband. And broadband can be either DSL or cable. So where does ethernet come from? The only thing I can tell is that I have a DSL model and there is an ethernet port at the back of it, a cable from which runs to a port in the back of my CPU. So, can ethernet be used to connect to the internet? Is it a subtype of DSL? I'm really confused about this, so I would really appreciate if someone could explain this to me. Also, I will apologize if this isn't the right place to ask.

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >