Search Results

Search found 9383 results on 376 pages for 'disk corruption'.

Page 194/376 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

  • Bad sectors, S.M.A.R.T., SpinRite, firmware on platter and drive id questions.

    - by Christopher Galpin
    Is it possible for S.M.A.R.T. to give false readings (say I was fiddling with lots of recovery programs, transfers, so on and so forth) or is it absolutely a read-only direct correlation to the physical status of a drive? Does SpinRite level 5 "recover bad sectors" operate on those marked at the factory? Are they on the same level as your generic bad sector, with SpinRite thus having full access? (Also I'm curious if SMART's bad sector count is zero'd afterward or if it includes factory marked sectors.) The main firmware of some drives, like a WD Passport is stored on the platter. How is it protected? Is it through marking them as bad sectors? If so, I'm wondering if SpinRite's sector recovery could bring about firmware corruption on these drives. Is the failure of a drive to report valid identity information (hdparm -I /dev/xx) consistent with corrupted firmware, or just general disk failure? I may be misunderstanding the role of firmware here. I feel I've read a drive's identity information is on the platter, just like the partition tables and so on. Is this true? (Apologizes if this is more appropriate for SuperUser.)

    Read the article

  • Where are Microsoft Outlook 2007 mails located ?

    - by Manu
    After a windows crash, I bought a new computer. I would like to recover the mails stored in the old install. I can access the old drive as a data disk, but windows won't boot anymore from it. I've reinstalled everything on the new computer, but can't find my old emails. Where are they stored ? Since I can't boot from the old drive, I cannot use Outlook's .pst export :(

    Read the article

  • Log - Server kernel: INFO: task httpd:000000 blocked for more than 120 seconds

    - by valter
    Almost everyday my server is crashing due to hight server load, and even restarting apache or mysql can't solve the problem. I need to reboot the server to solve, or it crash again due to the high load. The log system records something like this when it crashes: Aug 11 18:33:53 server kernel: INFO: task httpd:20008 blocked for more than 120 seconds. Aug 11 18:33:53 server kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Aug 11 18:33:53 server kernel: httpd D ffffffff801538ac 0 20008 5816 20066 19809 (NOTLB) Aug 11 18:33:53 server kernel: ffff81025a299dc8 0000000000000082 ffff81033b4c0740 ffffffff80009a14 Aug 11 18:33:53 server kernel: ffff8101063f8d80 0000000000000009 ffff8100b758f7e0 ffff8101c57187e0 Aug 11 18:33:53 server kernel: 00009436d4100b6c 000000000001d50f ffff8100b758f9c8 000000083b531588 Aug 11 18:33:53 server kernel: Call Trace: Aug 11 18:33:53 server kernel: [<ffffffff80009a14>] __link_path_walk+0x173/0xfb9 Aug 11 18:33:53 server kernel: [<ffffffff8002cc16>] mntput_no_expire+0x19/0x89 Aug 11 18:33:53 server kernel: [<ffffffff80063c4f>] __mutex_lock_slowpath+0x60/0x9b Aug 11 18:33:53 server kernel: [<ffffffff80023908>] __path_lookup_intent_open+0x56/0x97 Aug 11 18:33:53 server kernel: [<ffffffff80063c99>] .text.lock.mutex+0xf/0x14 Aug 11 18:33:53 server kernel: [<ffffffff8001b21f>] open_namei+0xea/0x712 Aug 11 18:33:54 server kernel: [<ffffffff8002768a>] do_filp_open+0x1c/0x38 Aug 11 18:33:54 server kernel: Firewall: *UDP_IN Blocked* IN=eth1 OUT= MAC=ff:ff:ff:ff:ff:ff:00:30:48:9e:6e:99:08:00 SRC=208.43.135.158 DST=255.255.255.255 LEN=151 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=38354 DPT=6112 LEN=131 Aug 11 18:33:54 server kernel: [<ffffffff8001a061>] do_sys_open+0x44/0xbe Aug 11 18:33:54 server kernel: [<ffffffff8005d28d>] tracesys+0xd5/0xe0 I googled a lot trying to find a solution. But it looks that the solution is just to update the kernel or disk driver, thinks that I don't know how to do. In this url http://bugs.centos.org/view.php?id=4515 a lot o people report similar problems, except the fact that they are not related to httpd like mine. According to one member, one solution would be to add "elevator=noop " to /etc/grub.conf like in this example: title CentOS (2.6.18-238.12.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-238.12.1.el5xen ro root=/dev/VolGroup00/LogVol00 elevator=noop initrd /initrd-2.6.18-238.12.1.el5xen.img Would this really solve the problem? My disk are working in RAID. Can this cause some problem to my server? Is there any other solution?

    Read the article

  • Appropriate USB enclosure to use with an Ultra ATA drive

    - by Topdown
    I have a friend with a broken iBook, but we wish to recover the hard disk. I haven't seen the drive itself, however the spec lists it as an "Ultra ATA drive". Could you please advise if this is 100% compatible with any standard USB IDE 2.5inch enclosure? Full spec: iBook 12" 1GHz(AP) 256MB DDR266 SDRAM built-in Keyboard/Mac OS X Bluetooth Module 40GB Ultra ATA drive Combo (DVD-ROM/CD-RW).

    Read the article

  • Windows 8 Installation doesn't detect my SATA Maxtor 6V250F0 HDD

    - by dosaki
    I've been using Ubuntu on a desktop computer I have in my house and I'd like to try to install Windows 8 and replace the Ubuntu system. In the installation wizard of Windows 8 I get stuck in the point where I have to specify the HDD to install the OS to. The problem is that I cannot see any hard disk drive to select. I believe this may be related to drivers but I don't know where to get them. Can anyone help me with this?

    Read the article

  • File corrupted by some tools (probably virus or antivirus)- does the pattern indicate any known corruptions?

    - by StackTrace
    As part of our software we install postgres(windows). In one of the customer sites, a set of files got corrupted. All files were part of timezone information(postgres/share/timezone). They are some sort of binary files. After the corruption, they all starts with following pattern od -tac output $ od -tac GMT 0000000 can esc etx sub nak dle em | nl em so | o r l _ 030 033 003 032 025 020 031 | \n 031 016 | o r l _ 0000020 \ \ \ \ \ \ \ del 3 fs ] del del del del del \ \ \ \ \ \ \ 377 3 034 ] 377 377 377 377 377 0000040 > ack r v s ack p soh q h r s q w h q 276 206 362 366 363 206 360 201 361 350 362 363 361 367 350 361 0000060 t r ack h eot s } v h | etx p eot ack nul } 364 362 206 350 204 363 375 366 350 374 203 360 204 206 200 375 0000100 | q t s t 8 E E E E E E E E E E 374 361 364 363 364 270 305 305 305 305 305 305 305 305 305 305 0000120 E E E E E E E E E E E E E E E E 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 305 * 0000240 m ; z dc3 7 sub c can em a u 5 can d 2 B 355 ; z 023 267 232 343 230 031 a u 5 230 d 262 302 0000260 X nul y J o S - 9 ] stx soh L can 1 ! j 330 \0 y 312 o S 255 9 335 202 001 314 030 261 241 j 0000300 dle g o etb n ff em ] 9 F ' dc4 } , em $ 020 g 357 227 n \f 231 ] 271 F 247 024 375 254 231 244 0000320 Q si ff L bs 2 # stx i 5 r % | | c del Q 017 214 314 210 2 # 002 351 5 362 245 374 374 343 177 0000340 m C esc H em enq ~ X o V p / l dc3 N sp m C 033 H 031 205 376 X o 326 360 257 l 023 N 0000360 } ) enq ( syn ! 3 s $ E z dc3 A dc3 ff P

    Read the article

  • Copying Windows 7 system onto Mac Pro partition?

    - by BEATFROMBRAIN
    Instead of installing a new Windows 7 system onto a mac pro partition, is it possible to copy over my complete Windows 7 system directly onto the partition, and get it to run? I just bought the mac pro, and it's running OSX 10.6... Copied from a comment: I wish to make a windows partition on the mac pro startup disk, but instead of installing windows, was wondering if I can copy over from my pc laptop byte for byte my windows system into said partition, and successfully run it

    Read the article

  • Making Linux smart about partition or filesystem moves with a UUID selection dialog?

    - by Luke Stanley
    It seems to me a major part of frustration n00bs have with Linux is due to UUID changes not matching peoples intuition and just working. Does anyone know a way of making GRUB and /etc/fstab just ASK PEOPLE about UUID changes, instead of just failing after people try moving hard disk? Could this be done in Bash or such? Is there a different flag or two somewhere we could simply change? Seems like this, if made to work in common practice could be a major advantage.

    Read the article

  • What is stored in %Windir%\System32\LogFiles\WMI\RtBackup?

    - by Helge Klein
    I occasionally notice in Resource Monitor hard disk activity related to ETL files in the folder C:\Windows\System32\LogFiles\WMI\RtBackup. Which process/service creates these ETL files and what is their purpose? Resource Monitor shows "System" as the process which is correct since ETW traces (that is what ETL files are) are created by the kernel. But I am interested in the process that causes the traces to be created. This happens on Windows 7, by the way.

    Read the article

  • Resizing Partitions on Live RHEL/cPanel Server

    - by Timothy R. Butler
    I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

    Read the article

  • norton ghost error in virtual box

    - by Nrew
    I'm trying out norton ghost on my virtual box guest os windows xp, dual boot with fedora 12. I've boot norton ghost iso. And tried to backup the partition where win xp and fedora is installed but I get this error. I'm backing it up on another virtual disk created through virtual box. What might be the cause of this error, and how to solve it.

    Read the article

  • Is it possible to resize the existing mac partion

    - by Mirage
    I have existing MAC partition of 16GB. But my hardisk is 40GB. I want to increase the size of MAC OS . I have created another virtual disk of 30 GB which is appearing on MAC as well. BUT what should i do to re-size the MAC partition. I can make the image of system as it says resource busy. how can i make image of system

    Read the article

  • Windows 7 system drive says it is raw, but System Recovery starts without issues

    - by iulianchira
    I have been running Windows 7 RC1 since it was available a couple of months ago and had no issues whatsoever until today. When I start my laptop, Windows does not boot but instead Windows System Recovery starts. I've used diskpart to list the partitions on the drive and my system partition (c:) has a RAW filesystem. I really need to save all data on the disk as fast as I cant and I would really like not to have to reinstall my system.

    Read the article

  • Macbook Pro keeps ejecting anything I put into the internal optical drive

    - by Wroblewski
    My hard disk crashed and I need to reinstall Mac OS X. I restart, insert the installation DVD, press c on the keyboard and the dvd ejects. I've tried different DVDs, even CDs. It's a Macbook Pro from march 2008. Is it broken? Or can it be something more severe like the firewire controller on the motherboard (since I noticed this after my hard drive started to act strangely)? I've ran Apple Hardware Test successfully.

    Read the article

  • SQL Server Log File Size Management

    - by Rob
    I have all my databases in full recovery and have the log backups happening every 15 minutes so my log files are usually pretty small. question is if there is a nightly operation that causes lots of transactions to happen and causes my log files to grow, should i shrink them back down afterward? Does having a gigantic log file negatively affect the database performance? Disk space isn't an issue at this time.

    Read the article

  • Hard Drives: Always on or spin up/down as needed?

    - by Terminal Frost
    The specific application is a NAS that hosts media content and is frequently accessed during the day. My NAS was probably cycling on and off around 5 times a day so I decided to not allow it to spin down. I'm thinking this will be better for the drive, but I am not sure. I am wondering, however, if there is any concrete information out there as to what causes more detrimental wear on a hard disk: Spinning 24/7 or cycling on and off as needed?

    Read the article

  • Copying Windows 7 system onto Mac Pro partition?

    - by BEATFROMBRAIN
    Instead of installing a new Windows 7 system onto a mac pro partition, is it possible to copy over my complete Windows 7 system directly onto the partition, and get it to run? I just bought the mac pro, and it's running OSX 10.6... Copied from a comment: I wish to make a windows partition on the mac pro startup disk, but instead of installing windows, was wondering if I can copy over from my pc laptop byte for byte my windows system into said partition, and successfully run it

    Read the article

  • Windows 7: Cannot format drive

    - by aximili
    I was using windows XP, and I just installed Windows 7 on another partition. Now I want to format the partition containing Windows XP, but it says "Windows was unable to complete the format". Under disk management, Format is disabled. Screenshot: http://home.exetel.com.au/aximili/tmp/format-disabled.jpg How can I format this partition (D:) and merge it with the current one (C:)? Thanks in advance.

    Read the article

  • Error ORA-01034: Oracle not available

    - by Mark Hardcastle
    I have an old Novell server which runs DocsOpen. I know very little about this system, basically we had a disk fault which halted the system. The server was rebooted and came up, I had to manually mount the DATA volume and then reboot again. All seems to be working but nobody can get in to DocsOpen, getting the error ORA-01034: Oracle not available.

    Read the article

  • How to: mirror a staging server from a production server

    - by Zombies
    We want to mirror our current production app server (Oracle Application Server) onto our staging server. As it stands right now, various things are out of sync, and what may work in testing/QA can easily fail in production because of settings/patch/etc inconsistencies. I was thinking what would be best is to clone the entire disk daily and push it onto the staging server... Would this be the best method...? (note: these are all windows servers)

    Read the article

  • my 4 month old 500 GB SATA HDD making noise

    - by Jitendra vyas
    my 4 month old 500 GB SATA HDD making noise, somrtime and pc hangs when it make noise when noise is over then desktop work fine. it's not happens daily but it happens. IS something wrong with HDD, or Data, power cable, or my Cabinet's power supply. should i run scandisk, defragmentation to whole disk.

    Read the article

  • Unable to use TweetDeck on Windows due to "Ooops, TweetDeck can't find your data" and "Sorry, Adobe

    - by Matt
    I'm running Adobe AIR 1.5.2 (latest) on Windows 7 (64-bit RTM) and downloaded TweetDeck 0.31.1 (latest). When I run TweetDeck I get the following errors: Ooops, TweetDeck can't find your data and Sorry, Adobe AIR has a problem running on this computer Other AIR applications install and run fine. I've uninstalled both TweetDeck and AIR and reinstalled. Following the uninstalls I've also removed all on-disk references to both TweetDeck and AIR, but no luck. UPDATE: Using Process Monitor I did a trace of Tweetdeck from the moment it launched until the first error occurred. I saw the following information in the output of the trace: 1 5:22:18.6522338 PM TweetDeck.exe 5580 CreateFile D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\??\d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS\TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak NAME INVALID Desired Access: Generic Write, Read Attributes, Disposition: OverwriteIf, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: N, ShareMode: Read, Write, AllocationSize: 0 In this trace output, Tweetdeck.exe is trying to create the file D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\??\d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS\TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak but the path specified is invalid. When looking at the path you can see that it is indeed an invalid path. First, there’s the “??” portion which doesn’t exist in the file system since the “?” is an invalid character in Windows/NTFS file systems. Additionally, looking at this path, it actually seems to be composed of two parts (is the "??" a delimiter?): Part 1: D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\?? Part 2: d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS \TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak (the problem here is that d:\Use... doesn’t even exist. What seems to be happening here is that Tweetdeck is looking for the user credentials (the “PrivateEncryptedDatak” file) but it’s looking in the wrong place, can’t find the file, and hence the error that Tweetdeck is giving (shown in the screenshot). I'm trying to determine how TweetDeck is getting this path. I searched the contents of all files on my hard disk hoping to find some TweetDeck or Adobe AIR configuration file containing this incorrect path, but I was unable to find anything. UPDATE: See Carl's comment regarding directory junctions and symbolic links under my accepted answer. This ended up being the problem. Edit by Gnoupi: People, the answer section is there to provide an actual ANSWER, not to say you have the same issue. It doesn't help anyone that you have the same problem. Eventually, if you think this is really worth mentioning, put it as a comment under the question. But simply, if what you want to add is not an answer to the question, then don't post it as an answer. This is not a forum, I recommend new users to read the FAQ: http://superuser.com/faq

    Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >