Search Results

Search found 14989 results on 600 pages for 'street address'.

Page 194/600 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Getting Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()

  - by geerlingguy

  About three days ago, I noticed the exim mailqueue started filling up on one of my servers, and upon inspecting some of the emails using # exim -Mvb $ID, I noticed they were being sent to some system email address (which is not a real address), and the body of the messages were as follows: (process:8259): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text() I'm wondering what could be causing this strange issue, as I've never heard of 'pango' at all... I've never seen that function used in my lifetime! It seems the process id (PID) is for an apache process, though, as the pids are always gone by the time I use # ps -aux to look them up. Edit: Whoops! Forgot to include the subject - looks like it's actually munin-cron that's bringing up the issue: Subject: Cron /usr/bin/munin-cron --force-root

  Read the article

• Spotlight on GlassFish 4.1: #7 WebSocket Session Throttling and JMX Monitoring

  - by delabassee

  'Spotlight on GlassFish 4.1' is a series of posts that highlights specific enhancements of the upcoming GlassFish 4.1 release. It could be a new feature, a fix, a behavior change, a tip, etc. #7 WebSocket Session Throttling and JMX Monitoring GlassFish 4.1 embeds Tyrus 1.8.1 which is compliant with the Maintenance Release of JSR 356 ("WebSocket API 1.1"). This release also brings brings additional features to the WebSocket support in GlassFish. JMX Monitoring: Tyrus now exposes WebSocket metrics through JMX . In GF 4.1, the following message statistics are monitored for both sent and received messages: messages count messages count per second average message size smallest message size largest message size Those statistics are collected independently of the message type (global count) and per specific message type (text, binary and control message). In GF 4.1, Tyrus also monitors, and exposes through JMX, errors at the application and endpoint level. For more information, please check Tyrus JMX Monitoring Session Throttling To preserve resources on the server hosting websocket endpoints, Tyrus now offers ways to limit the number of open sessions. Those limits can be configured at different level: per whole application per endpoint per remote endpoint address (client IP address)   For more details, check Tyrus Session Throttling. The next entry will focus on Tyrus new clients-side features.

  Read the article

• iPhone always assigned wrong ip

  - by Ashley Ray

  for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

  Read the article

• How to get httpd to forward to multiple tomcats for different urls, including / ?

  - by Nick Foote

  Ok So I've got multiple tomcat instances setup on several AJP ports, I also have Apache httpd listening on port 8090 (cos I've got another app already using 8080 at the moment). I've successfully mapped urls such as mydomain.com:8090/demo and mydomain.com:8090/preprod to their respective tomcat instances using Jk Mount and the following vhosts config; <VirtualHost *:8090> JkMount /preprod* preprod JkMount /demo* demo </VirtualHost> But I also want the "root" address to map to another tomcat instance, what will become live/production, ie I want mydomain.com:8090/ to map a 3rd tomcat instance. At the moment nothing happens or changes if I just add to the above config a line; JkMount /* rootwar if I browse to mydomain.com:8090 I just get the same boring apache httpd landing page letting me know its running (ie index.html in httpd/htdocs) Is it possible to use JkMount to redirect the "root" address stuff to a tomcat instance? I can see that a rule like /* will also match URLs like mydomain.com/preprod but I was hoping the rules are applied in order so if /* appears at the end it effectively would be a "if its not one of the other environments, then direct to root/production" Just to be clear I'm trying to setup the following; mydomain.com:8090/preprod --> myApp running in tomcat1 mydomain.com:8090/demo --> myApp running in tomcat2 mydomain.com:8090 --> myApp running in tomcat3

  Read the article

• Get external metadata with streamripper using python script

  - by user72379

  Hi I like using streamripper to rip music from the web. I have a favorite radio station that doesn't have the metadata for the songs, so I have to screen scrape it from its website manually. I created this neat python script in the format that the docs suggest, and linked the address in the GUI for streamriper. But it still doesn't work, any one know how to make it work..? I know it used to work. It gives you a sample here: http://streamripper.sourceforge.net/history.php import http import time import re u = 'SEE IMAGE FOR THIS URL' s = http.Session(0, 0) s.add_headers(h, persistent=1) while 1: c = unicode(s.get(u)) pat = r'class="title"([^<]+)([^<]+)' m = re.search(pat, c) title = m.group(1) artist = m.group(2) print 'TITLE='+title+'\n'+'ARTIST='+artist+'\n.\n' time.sleep(30) [img]http://s11.postimage.org/sok928lsz/urlstream.png[/img] I put the address to the script here: [img]http://s17.postimage.org/4bhmhi4yn/streamripper.png[/img] I've tried putting it in the root of the streamripper application and doing this: lax.py I've even compiled it to a EXE, and tried linking to that.. nothing What am I doing wrong?

  Read the article

• How the heck is http://to./ a valid domain name?

  - by Chris

  Apparently it's a URL shortener. It resolves just fine in Chrome and Firefox. How is this a valid top-level domain? Update: for the people saying it's browser shenanigans, why is it that: http://com./ does not take me to: http://www.com/? And, do browsers ever send you a response from some place other than what's actually up in the address bar? Aside from framesets and things like that, I thought browsers tried really hard to send you content only from the site in the address bar, to help guard against phishing.

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• Prevent users from being able to change JavaScript variables

  - by paldepind

  Is it possible somehow to prevent users from being able to change JavaScript variables, trough the address bar or with programs like FireBug?

  Read the article

• Troubleshoot telnet connection from Windows 7 to UNIX

  - by Sujay Ghosh

  I am trying to connect to an Asterisk server in USA. I am using telnet < IP Address 5038 from India to USA. The person in USA is able to telnet to the IP address and port from USA , but I am not able to do it from India. We are on different networks. I am using Windows 7 Ultimate, and have enabled the Telnet client. I have also used Putty without any success. Can someone suggest me what can be the problem and how can this be resolved.

  Read the article

• Mac | Port Forwarding for Remote Desktop

  - by Vaibhav Bajpai

  I have two Mac notebooks at home, I have assigned them static private IPs. I have also set my router to a DynDNS address, which updates everytime my router gets a new public IP. I have enabled Screen Sharing on both notebooks. I can successfully goto my router webpage using the DynDNS address. I understand I need to port-forward to get Screen Sharing to work from outside. Lets assume, notebooks have private IP 192.168.1.2 and 192.168.1.3 I am kind of lost here, would appreciate some help (I need to be able remote desktop to both notebooks)

  Read the article

• pppoe connection to dsl model

  - by VJo

  Hello, I am connecting to the internet through a pppoe connection, but for some reason I can not connect to my modem (it's address is 192.168.1.1). Before I set my pppoe connection, I could connect. So, is there a way? EDIT The output of ifconfig is : r@PlaviZec:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:13:d4:f7:02:d4 inet6 addr: fe80::213:d4ff:fef7:2d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2811 errors:0 dropped:0 overruns:0 frame:0 TX packets:2801 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2538831 (2.5 MB) TX bytes:448591 (448.5 KB) Interrupt:21 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:28 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1600 (1.6 KB) TX bytes:1600 (1.6 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:92.229.42.177 P-t-P:213.191.64.59 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:2794 errors:0 dropped:0 overruns:0 frame:0 TX packets:2741 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:2476277 (2.4 MB) TX bytes:381240 (381.2 KB)

  Read the article

• How to forward AIM to Gmail

  - by iamjames

  Still have an old AIM email address lying around and would like to forward it to Gmail?  Here's how: 1.  Login to your AIM and click on Settings on the far right 2.  In the left menu click IMAP and POP  3.  This shows you your IMAP and POP setup information for AIM.  We're going to put this into your Gmail account so your Gmail account will check your AIM account and download all AIM emails. 4.  Login to your Gmail, click Settings and click Accounts and Import 5.  Click "Import mail and contacts".  A new window will pop up asking what account you want to import.  Enter your AIM Email Address and click Continue 6.  The next page asks for your password.  Enter your password and click Continue.  Step 2 asks your Import options.  I'd put a checkmark in "Leave a copy of retrieved message on server".  That way all your mail is still stored on AIM if you ever need it. 7.  Click Start import and you're done.  Next screen says it make take several hours up to 2 days before you start seeing imported messages and can check the status at Settings > Accounts and Import

  Read the article

• NoSQL

  - by NoReasoning

  Last night, (Tuesday, June 28), at the KC .NET User group meeting, George Westwater gave a terrific presentation on NoSQL. The best way to define it (the best way is to see George explain it, and he says he will record his presentation and make it available through his blog – link above)  is databases  that does not use relational technology. And his point, and this is true – I have been around awhile – is that non-relational databases have been used for over 50 years in the business. He points out that Wall Street firms have been using non-relational technology ever since they started using computers. IBM still fully supports IMS, now in version 11 (12 is in beta), because these firms are still using this product and will continue to do so for a long time. Of course, like a lot of computer business technology, there are a lot of new NoSQL products available these days, simply as a reaction to the problems of scaling relational databases for internet use. As a result, it almost looks as though NoSQL is something new. And there are a lot, I mean a LOT, I mean a L-O-T , of new products out there for this technology. The best resource to cover all of these products is http://nosql-database.org/, which has a huge listing of what is available. My interest in the subject is primarily due to my interest in Windows Azure and the fact that Windows Azure storage is all non-relational, even the table storage. It is very fascinating and most of all, far cheaper than using SQL Azure for storage in the “cloud."

  Read the article

• IPv6 tunnels - any easy way to turn them on and off?

  - by Rob Hoare

  I've set up a tunnelbroker.net (Hurricane Electric) IPv6 tunnel from my laptop running 12.04. Works fine, and allows me to test the dual-stack configuration on my remote webservers etc. until native IPv6 is available on my ISP. However, there are times when I don't want the tunnel. For example if I'm accessing something that requires an IPv4 address in my own country rather than the Tunnelbroker tunnel endpoint, or if I'm away from the local IPv4 tunnel endpoint, or if I simply want to test without IPv6. Is there a simple way to disable and then re-enable the IPv6 tunnel, without rebooting? For context, here's what's in my /etc/network/interfaces (NNN replaces numbers): auto he-ipv6 iface he-ipv6 inet6 v4tunnel endpoint 216.218.NNN.NNN address 2001:470:NNN:NNN::2 netmask 64 up ip -6 route add default dev he-ipv6 down ip -6 route del default dev he-ipv6 Is there a network manager application (gui or command line) to selectively enable/disable parts of /etc/network/interfaces, or IPv6 in general? I found even by commenting out that out (and reloading networking) it's tough to get the IPv6 to go away. A "tunnel on/off" button in networking would be great, like using a VPN.

  Read the article

• postfix-dovecot email sending works with squirrel mail but not with Thunderbird?

  - by Mark S.

  I have setup an intranet email system using postfix, dovecot and squirrel mail, Which is working fine, I can send and receive mail to all users on the system. I presume that the issue is in the postfix configuration, because when I configure Thunderbird to send mail I am getting the following error: An error occurred while sending mail. The mail server responded: 4.1.8 <[email protected]>: Sender address rejected: Domain not found. Please check the message recipient [email protected] and try again. Also here is the relevant syslog entries: NOQUEUE: reject: RCPT from host1.intranetdomain.com [More Information] [192.168.11.1 [More Information] ]: 450 4.1.8 <[email protected]>: Sender address rejected: Domain not found; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<[127.0.0.1 [More Information] ]> I have configured MX records on the DNS server and they respond appropriately when I query them for those MX records, so I do not think that is the issue. I think that my issue is caused by the default configuration of: smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sender_restrictions = reject_unknown_sender_domain Since this is on an internal network and it will not be exposed to the internet as a whole which options can I remove safely?

  Read the article

• Trixbox CentOS Default GW Problem (Multi-homed server)

  - by slashp

  I'm having an issue with a CentOS trixbox server which is dual-homed (one private facing NIC [eth1], one internet-facing NIC [eth0]). I can't seem to get the default gateway to set properly to our ISP's GW via eth0. I've modified the /etc/sysconfig/network to contain both a GATEWAY & GATEWAYDEV line and removed the GATEWAY line from /etc/sysconfig/network-scripts/ifcfg-eth1 (as well as /etc/sysconfig/network-scripts/ifcfg-eth0). No default GW shows up in the routing table unless it's specified in the ifcfg-eth1 file (which both the wrong interface and wrong gateway IP), otherwise, the routing table simply does not contain a default gateway..any ideas would be greatly appreciated! Thanks! EDIT Just realized when attempting to add the default gateway manually using the route add command, I receive an error stating: SIOCADDRT: Network is unreachable I know this error can occur when your default gateway and interface IP address are not on the same subnet..in this case, my public IP address of eth0 is a /29.

  Read the article

• Byte Size Tips: How to Show Google / Gmail Contacts in the OS X Contacts App

  - by The Geek

  The Contacts app on OS X isn’t very interesting, but if you can use it to display your Gmail contacts, it’ll get a little bit better. Luckily it’s pretty easy to add your Google / Gmail contacts, but you’ll have to click the mouse a few times and maybe poke at the old keyboard once or twice to type in your email address and password. It’s worth noting that if you set up Gmail in the Mail app you shouldn’t have to do this. Since we prefer Gmail in a browser, that’s why we’re writing this. Or just because we’re procrastinating the book editing that we’re supposed to be doing. Don’t judge. Start by opening the Preferences for the Contacts app by heading up to the Menu bar. Go to Accounts and then click the + sign to add a new one. Choose CardDAV for the account type, use your Gmail username and password, and put google.com as the server address. If you are using two-factor authentication, you’ll need to create a specific password for this account.    

  Read the article

• setting up a WGR614v7 behind a linux box

  - by commodore fancypants

  Here's the setup, I have an openSUSE box with 2 NICs, one goes to my home network router, the other has DHCP running and it attached to a wireless router. I'm trying to get this setup to work before I switch to the linux box as my home network router. My DHCP will offer the wireless router (a WGR614v7) an address, but anything that connects to the wireless router ends up with a APIPA address. I have all the firewalls on the wireless network turned off as well as the wireless router's own DHCP. The linux box isn't offering addresses to anything past the wireless router. Is this a problem with the router or my DHCP setup? For testing purposes, I have both NICs set in the internal zone and I've tried wireless and wired connections to the WGR614v7 both to no avail.

  Read the article

• Where is debian storing its network settings?

  - by user13743

  I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

  Read the article

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• ArchBeat Link-o-Rama for 2012-04-12

  - by Bob Rhubart

  2012 Real World Performance Tour Dates |Performance Tuning | Performance Engineering www.ioug.org Coming to your town: a full day of real world database performance with Tom Kyte, Andrew Holdsworth, and Graham Wood. Rochester, NY - March 8 Los Angeles, CA - April 30 Orange County, CA - May 1 Redwood Shores, CA - May 3 Oracle Technology Network Developer Day: MySQL - New York www.oracle.com Wednesday, May 02, 2012 8:00 AM – 4:30 PM Grand Hyatt New York 109 East 42nd Street, Grand Central Terminal New York, NY 10017 Webcast Series: Data Warehousing Best Practices event.on24.com April 19, 2012 - Best Practices for Workload Management of a Data Warehouse on Oracle Exadata May 10, 2012 - Best Practices for Extreme Data Warehouse Performance on Oracle Exadata Webcast: Untangle Your Business with Oracle Unified SOA and Data Integration event.on24.com Date: Tuesday, April 24, 2012 Time: 10:00 AM PT / 1:00 PM ET Speakers: Mala Narasimharajan - Senior Product Marketing Manager, Oracle Data Integration, Oracle Bruce Tierney - Director of Product Marketing, Oracle SOA Suite, Oracle The Increasing Focus on Architecture (ArchBeat) blogs.oracle.com As a "third wave" of computing, Cloud computing is changing how IT organizations and individuals within those organizations approach the creation of solutions. Updated SOA Documents now available in ITSO Reference Library blogs.oracle.com Nine updated documents have just been added to the IT Strategies from Oracle library, including SOA Practitioner Guides, SOA Reference Architectures, and SOA White Papers and Data Sheets. Access to all documents within the ITSO library is free to those with a free Oracle.com membership. WebLogic JMS Clustering and Spring | Rene van Wijk middlewaremagic.com Oracle ACE Rene van Wijk sets up a WebLogic cluster that includes a JMS environment, which will be used by Spring. Running Built-In Test Simulator with SOA Suite Healthcare 11g in PS4 and PS5 | Shub Lahiri blogs.oracle.com Shub Lahiri shows how the pre-installed simulator that comes with the SOA Suite for Healthcare Integration pack can be used as an external endpoint to generate inbound and outbound HL7 traffic on specified MLLP ports. In the cloud era, let's start calling IT what it is: 'Innovation Team' | Joe McKendrick www.zdnet.com Cloud, the third great shift in 50 years of computing, presents a golden opportunity for IT to get out in front and lead. Thought for the Day "Why do we never have time to do it right, but always have time to do it over?" — Anonymous

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• Server problem (duh)

  - by j-t-s

  Sorry the title couldn't be more specific. I installed Abyss Web Server. I'm running Windows XP Home Edition and I have Wireless Mobile Broadband internet. I used to be able to access (and other people on other networks) my site by entering my ip address in the browser, but after I formatted, and the installed abyss web server again, this does not work anymore. There are no errors. I CAN visit my own site by entering my ip address BUT anybody else can't do the same, it just says "connecting" in the browser's statusbar and it never changes. I have consulted the docs and have found no help. Google hasn't helped with this problem either. Can somebody please help? Thank you :)

  Read the article

• How can I use domain masking without having self referral in Google Analytics

  - by Cdore

  I have one old domain that points to a website's server's ip (let's call it www.oldsite.com). I have a new one, www.newsite.com, that is set up to be forwarded to a specific page on the website. Due to the way the host of newsite.com places the website in a frame, in Google Analystics, the newsite.com is listed as a source rather than the source they were at before hand, causing a self referral. A solution is to edit the code of the iframe as I looked up, but there's no way to really edit the host's masking source code of course. Another solution I did previously was have www.newsite.com point to the address that www.oldsite.come pointed to. It solved the analytics problems, but in exchange, the url masking no longer worked. In the address bar, it came up as www.oldsite.com. Is there a way to make me have url masking and be able to forward to agree with google analytics? The server of the website is hosted on a cloud server, if this is anymore information.

  Read the article

• VoIP on Netgear DGN 2000 and Lynksys PAP2

  - by David Brown

  I have a VoIP service running perfectly for outgoing calls but I cannot receive incoming calls. I have a Netgear DGN 2000 modem router on 192.168.0.1 and a Lynksys Phone Adapter PAP2 on 192.168.0.2. I have created 3 new custom services: Service Table Service Name Ports tlenfon(TCP) 5060 tlenfon2(UDP) 15000 tlenfon3(UDP) 35000 I have reserved the address 192.168.0.2 for the PAP 2 I have forwarded the ports for each service to the PAP2 Service Name Action LAN Server IP address WAN Users Log tlenfon ALLOW always 192.168.0.2 Any Always tlenfon2 ALLOW always 192.168.0.2 Any Always tlenfon3 ALLOW always 192.168.0.2 Any Always I have checked the Default DMZ and specified 192.168.0.2 What have I missed?

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >