Search Results

Search found 5572 results on 223 pages for 'cpu'.

Page 195/223 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

  • SQLite NHibernate configuration with .Net 4.0 and vs 2010

    - by Berryl
    I am having way too much trouble getting my environment straight after switching to 2010 and .net 4.0, so I'd like to break the whole process down once and for all. 1) Which SQLite dll?? I think it is SQLite-1.0.65.1-vs2010rc-net4-setup.zip. Yes? 2) I ran the installer so the dll is in the GAC but I usually find there are less problems if I can just reference the dll stand alone. Is there any reason it needs to be in the GAC, and if not, what's the best way to uninstall it from the GAC (I can get to the GAC folder but it says I need permission to delete the files; should I leave the SQLite Designer dll's there?)? 3) x64. There is an x64 dll in the download. I had problems with SQLite in the past though that I could only resolve by compiling to x86. Can I safely reference the x64 dll and compile to Any CPU now? 4) what is the right NHib config? I have been using the one below, but since the error I get says "Could not create the driver from NHibernate.Driver.SQLite20Driver." that configuration is guilty until proven innocent too? 5) could FNH be a problem too? I don't use the pre-configured fluent SQLite method but FNH has to provide a reference to it for that to work, no? TIA & Cheers, Berryl <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> ... <property name="dialect">NHibernate.Dialect.SQLiteDialect</property> <property name="connection.driver_class">NHibernate.Driver.SQLite20Driver</property> <property name="connection.connection_string">Data Source=:memory:;Version=3;New=True;</property> .... </hibernate-configuration>

    Read the article

  • SSL Slow in IE 8.0.7600.16385IC

    - by discovery.jerrya
    I'm having a performance problem on my company's web site using a specific version of IE 8 to load a page using https. Here's what I know. Server: Virtual machine running on VMWare ESX Windows Server 2003 Enterprise Edition SP 2 Tomcat 6.0.16 Client: Windows XP and Window 7 Internet Explorer 8.0.7600.16385IC Page loads/refreshes in under 1 second using HTTP. Page loads/refreshes in 15-16 seconds in HTTPS using this version of IE. Problem reproduced on multiple client machines with same IE version. Problem reproduced on multiple client machines with different Windows versions (XP and 7). No performance problem using Chrome, Firefox, Opera, or Safari from same machine. No performance problem using other versions of IE 8 on other machines. Slow load causes virtually no CPU, memory, or I/O spike on server or client machine. No performance problem on other sites using HTTPS on same client machine. The pages in question use JavaScript and innerHTML to replace the contents of div elements to create a collapsible menu, and an iframe to display some content. A couple of the div elements contain images. If I remove the iframe and the JavaScript, the performance issues go away. However, rewriting the entire site to make these changes would be very time consuming. We're in the process of replacing the whole site, but it may be 2-3 months before we do so and we really cannot live with this slowdown that long. I've already looked at several IE tuning options, such as disabling add ons, running IE-rereg, and resetting IE, with no luck. Does anyone have any suggestions?

    Read the article

  • Spoofing UserAgent in Opera

    - by PoweRoy
    I'm trying to spoof Opera (under linux) to be an other browser, in this case iPad for some testing purposes. Now I know sites can check which browser is accessing the using for example in PHP $useragent = $_SERVER['HTTP_USER_AGENT']; and in javascript navigator.userAgent (or navigator.platform). In firefox you can use an addon to easily switch your useragent and other relevant information, but in Opera it seems it bit hard to do. First in opera.ini you can do: [User Agent] Spoof UserAgent ID=1 But this is limited to a predefined list of UserAgents. No room for custom ones. Also in opera.ini [ISP] Id=iPad This will add iPad to the User Agent of Opera. It's a start and works most of the time on the sites. In opera.ini you can set a 'User JavaScript file' to load a custom JavaScript file before loading a website: [User Prefs] User JavaScript File=/opera_dir/userjs/load.js In load.js you can do: navigator.userAgent = "Mozilla/5.0 (iPad; U; CPU OS 3_2 like Mac OS X; en-us) AppleWebKit/531.21.10 (KHTML, like Gecko) Version/4.0.4 Mobile/7B334b Safari/531.21.10" Because this file gets executed before loading the website I can modify the UserAgent, but this won't work when a site is checking the UserAgent via PHP, but it works for sites checking with Javascript) So here's my question: is there another way of spoofing a complete custom UserAgent?

    Read the article

  • What's slowing for loops/assignment vs. C?

    - by Lee
    I have a collection of PHP scripts that are extremely CPU intensive, juggling millions of calculations across hundreds of simultaneous users. I'm trying to find a way to speed up the internals of PHP variable assignment, and looping sequences vs C. Although PHP is obviously loosely typed, is there any way/extension to specifically assign type (assign, not cast, which seems even more expensive) in a C-style fashion? Here's what I mean. This is some dummy code in C: #include <stdio.h> int main() { unsigned long add=0; for(unsigned long x=0;x<100000000;x++) { add = x*59328409238; } printf("x is %ld\n",add); } Pretty self-explanatory -- it loops 100 million times, multiples each iteration by an arbitrary number of some 59 billion, assigns it to a variable and prints it out. On my Macbook, compiling it and running it produced: lees-macbook-pro:Desktop lee$ time ./test2 x is 5932840864471590762 real 0m0.266s user 0m0.253s sys 0m0.002s Pretty darn fast! A similar script in PHP 5.3 CLI... <?php for($i=0;$i<100000000;$i++){ $a=$i*59328409238; } echo $a."\n"; ?> ... produced: lees-macbook-pro:Desktop lee$ time /Applications/XAMPP/xamppfiles/bin/php test3.php 5.93284086447E+18 real 0m22.837s user 0m22.110s sys 0m0.078s Over 22 seconds vs 0.2! I realize PHP is doing a heck of a lot more behind the scenes than this simple C program - but is there any way to make the PHP internals to behave more 'natively' on primitive types and loops?

    Read the article

  • Android Live Wallpaper: waitForCondition(ReallocateCondition)

    - by jstatz
    I've been developing a live wallpaper using GLWallpaperService, and have gotten good results overall. It runs rock-solid in the emulator and looks good. I've dealt with OpenGL many times before so have a solid command of how to do things... unfortunately I'm having a hell of a time getting this to actually be stable on the actual hardware. The basic symption occurs when you slide the physical keyboard on a Motorola Droid in and out a few times. This causes the wallpaper to get destroyed/recreated several times in quick succession -- which would be fine, as I have my assets clearing in onDestroy and reloading in onSurfaceChanged. The problem is after a few iterations of this, (four or five, maybe) the calls to onSurfaceChanged completely stop, and i get an endless string of this printed to the log: 04-02 00:53:18.088: WARN/SharedBufferStack(1032): waitForCondition(ReallocateCondition) timed out (identity=337, status=0). CPU may be pegged. trying again. Is there something I should be implementing here aside from the Android-typical onSurfaceCreated/onSurfaceChanged/onSurfaceDestroyed triumvirate? Browsing through the WallpaperService and WallpaperRenderer classes doesn't pop up anything obvious to me.

    Read the article

  • MSBuild 2010 - how to publish web app to a specific location (nant)?

    - by Mr. Flibble
    I'm trying to get MSBuild 2010 to publish a web app to a specific location. I can get it to publish the deployment package to a particular path, but the deployment package then adds it's own path that changes. For example: if I tell it to publish to C:\dev\build\Output\Debug then the actual web files end up at C:\dev\build\Output\Debug\Archive\Content\C_C\code\sawadee\frontend\IPP-FrontEnd\Source\ControllersViews\obj\Debug\Package\PackageTmp And the C_C part of the path changes (not sure how it chooses this part of the path). This means I can't just script a copy from the publish location. I'm using this nant/msbuild command at the moment: <target name="compile" description="Compiles"> <msbuild project="${name}.sln"> <property name="Platform" value="Any CPU"/> <property name="Configuration" value="Debug"/> <property name="DeployOnBuild" value="true"/> <property name="DeployTarget" value="Package"/> <property name="PackageLocation" value="C:\dev\build\Output\Debug\"/> <property name="AutoParameterizationWebConfigConnectionStrings" value="false"/> <property name="PackageAsSingleFile" value="false"/> </msbuild> Any ideas on how to get it to send the web files directly to a specific location?

    Read the article

  • solve a classic map-reduce problem with opencl?

    - by liuliu
    I am trying to parallel a classic map-reduce problem (which can parallel well with MPI) with OpenCL, namely, the AMD implementation. But the result bothers me. Let me brief about the problem first. There are two type of data that flow into the system: the feature set (30 parameters for each) and the sample set (9000+ dimensions for each). It is a classic map-reduce problem in the sense that I need to calculate the score of every feature on every sample (Map). And then, sum up the overall score for every feature (Reduce). There are around 10k features and 30k samples. I tried different ways to solve the problem. First, I tried to decompose the problem by features. The problem is that the score calculation consists of random memory access (pick some of the 9000+ dimensions and do plus/subtraction calculations). Since I cannot coalesce memory access, it costs. Then, I tried to decompose the problem by samples. The problem is that to sum up overall score, all threads are competing for few score variables. It keeps overwriting the score which turns out to be incorrect. (I cannot carry out individual score first and sum up later because it requires 10k * 30k * 4 bytes). The first method I tried gives me the same performance on i7 860 CPU with 8 threads. However, I don't think the problem is unsolvable: it is remarkably similar to ray tracing problem (for which you carry out calculation that millions of rays against millions of triangles). Any ideas?

    Read the article

  • Async.Parallel or Array.Parallel.Map ?

    - by gurteen2
    Hello- I'm trying to implement a pattern I read from Don Syme's blog (http://blogs.msdn.com/dsyme/archive/2010/01/09/async-and-parallel-design-patterns-in-f-parallelizing-cpu-and-i-o-computations.aspx) which suggests that there are opportunities for massive performance improvements from leveraging asynchronous I/O. I am currently trying to take a piece of code that "works" one way, using Array.Parallel.Map, and see if I can somehow achieve the same result using Async.Parallel, but I really don't understand Async.Parallel, and cannot get anything to work. I have a piece of code (simplified below to illustrate the point) that successfully retrieves an array of data for one cusip. (A price series, for example) let getStockData cusip = let D = DataProvider() let arr = D.GetPriceSeries(cusip) return arr let data = Array.Parallel.map (fun x -> getStockData x) stockCusips So this approach contructs an array of arrays, by making a connection over the internet to my data vendor for each stock (which could be as many as 3000) and returns me an array of arrays (1 per stock, with a price series for each one). I admittedly don't understand what goes on underneath Array.Parallel.map, but am wondering if this is a scenario where there are resources wasted under the hood, and it actually could be faster using asynchronous I/O? So to test this out, I have attempted to make this function using asyncs, and I think that the function below follows the pattern in Don Syme's article using the URLs, but it won't compile with "let!". let getStockDataAsync cusip = async { let D = DataProvider() let! arr = D.GetData(cusip) return arr } The error I get is: This expression was expected to have type Async<'a but here has type obj It compiles fine with "let" instead of "let!", but I had thought the whole point was that you need the exclamation point in order for the command to run without blocking a thread. So the first question really is, what's wrong with my syntax above, in getStockDataAsync, and then at a higher level, can anyone offer some additional insight about asychronous I/O and whether the scenario I have presented would benefit from it, making it potentially much, much faster than Array.Parallel.map? Thanks so much.

    Read the article

  • Can you use gzip over SSL? And Connection: Keep-Alive headers

    - by magenta
    I'm evaluating the front end performance of a secure (SSL) web app here at work and I'm wondering if it's possible to compress text files (html/css/javascript) over SSL. I've done some googling around but haven't found anything specifically related to SSL. If it's possible, is it even worth the extra CPU cycles since responses are also being encrypted? Would compressing responses hurt performance? Also, I'm wanting to make sure we're keeping the SSL connection alive so we're not making SSL handshakes over and over. I'm not seeing Connection: Keep-Alive in the response headers. I do see Keep-Alive: 115 in the request headers but that's only keeping the connection alive for 115 milliseconds (seems like the app server is closing the connection after a single request is processed?) Wouldn't you want the server to be setting that response header for as long as the session inactivity timeout is? I understand browsers don't cache SSL content to disk so we're serving the same files over and over and over on subsequent visits even though nothing has changed. The main optimization recommendations are reducing the number of http requests, minification, moving scripts to bottom, image optimization, possible domain sharding (though need to weigh the cost of another SSL handshake), things of that nature.

    Read the article

  • Problem upgrading eclipse rcp app from 3.3 to 3.5 on Mac OS

    - by Alb
    I previously had an eclipse rcp app based on eclipse 3.3 pugins deployed on both windows and mac OS X 10.4. i'm now trying to port the app to java 1.6 and eclipse 3.5 (Build id: 20100218-1602) plugins on Mac OS X 10.5.8 (Leopard). I can launch the product from eclipse 3.5 on windows but not on Mac OS X. I have the 64bit cocoa eclipse IDE and java 6. In the launch configuration I set runtime JRE to JVM 1.6.0 and added required plugins. The plugins validate and everything else looks similar to windows configuration where it works, but when I launch i only get the following two lines in the console: 2010-03-16 13:29:32.742 java[758:10b] [Java CocoaComponent compatibility mode]: Enabled 2010-03-16 13:29:32.744 java[758:10b] [Java CocoaComponent compatibility mode]: Setting timeout for SWT to 0.100000 and then the program appears to just hang indefinitely. There is nothing written to the .log file so I'm not sure what error there is. EDIT: Here's what Yourkit profiling says before all cpu activity stops. +----------------------------------------------------------------------------+----------------+-----------------+ | Name | Time (ms) | Own Time (ms) | +----------------------------------------------------------------------------+----------------+-----------------+ | +---<All threads> | 2,799 100 % | | | | | | | | +---org.eclipse.equinox.launcher.Main.main(String[]) | 1,924 69% | 0 | | | | | | | +---org.eclipse.osgi.framework.eventmgr.EventManager$EventThread.run() | 632 23 % | 0 | | | | | | | +---java.lang.Thread.run() | 135 5 % | 0 | | | | | | | +---java.lang.ClassLoader.loadClassInternal(String) | 106 4 % | 0 | +----------------------------------------------------------------------------+----------------+-----------------+ , and this in the exceptions tab: Exception staticstics +----------------------------------------+--------------+ | Name | Count | +----------------------------------------+--------------+ | +---java.lang.ClassNotFoundException | 102 11 % | | | | | | +---java.net.MalformedURLException | 4 0 % | | | | | | +---java.lang.NoSuchMethodException | 3 0 % | | | | | | +---java.lang.NumberFormatException | 2 0 % | | | | | | +---java.io.FileNotFoundException | 1 0 % | | | | | | +---java.lang.UnsatisfiedLinkError | 1 0 % | +----------------------------------------+--------------+ and here's more details on the ClassNotFoundExceptions mentioned above: java.lang.ClassNotFoundException Start Level Event Dispatcher native ID: 0x8B0B group: 'main' 78 Thread-4 native ID: 0x10B group: 'main' 22 Framework Event Dispatcher native ID: 0xD207 group: 'main' 2 Anyone know why I don't see a trace for this in Eclipse or in any log files? any ideas where I should look? [Updated on: Tue, 16 March 2010 09:37]

    Read the article

  • WCF Service Throttling

    - by Mubashar Ahmad
    Dear All I have a WCF Service Deployed in a Console App with BasicHTTPBinding and SSL enabled on port using NetSH command and more over following attribute is set as well. [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] And also i have set the Throttling behavior as <serviceThrottling maxConcurrentCalls="2147483647" maxConcurrentSessions="2147483647" maxConcurrentInstances="2147483647" /> On the other hand i have created a Test Client(for load test) that initiates multiple clients simultaneously(multiple threads) and performs transactions on server. everything seems fine and working properly but on server the CPU utilization is doesn't grow so i added some logging to view the number of concurrent calls to the server and found that its never went over 6. i have reviewed the performance counter logging code more than twice and it seems fine to me. So i want to ask where is the problem in this situation and one more thing i haven't specified any kind of ContextMode or ConcurrencyMode yet. After this Post I noticed that whenever i start another Intance of Test Client my concurrent Server Calls counter increase to 2 like if i am running only 1 instance the maximum Concurrent Rcvd Calls will be 2 and if there are two instance the same value goes to 4 and so on. Is there any limit of Number of WCF Calls from once process? Looking for help Mubashar *Added on 17-March******************* Today i ran another test with one test client(with 50 concurrent users) on the same machine on which the server is running this time i am getting exact result what i wanted it to show i.e. Maximum concurrent Calls Rcvd by Server = 50 but i need to do it the same on others machines as well. Can anybody help me on this.

    Read the article

  • what can be causes of http server crash?

    - by mithunmo
    Hello , I am using WAMP server on Windows XP. - Apache 2.2.11 - MySQL 5.1.36 (INNODB engine) - PHP 5.3.0 I observe that my WAMP server crashes in the following scenarios 1) IF I use a Low end PC ( low processor speed and low RAM) 2) After making some changes to httpd.conf file .For eg changing the Allow from IP address . But here it crashes only once and then it starts to work fine. 3) Random crashes CRASH LOG szAppName : httpd.exe szAppVer : 2.2.11.0 szModName : php5ts.dll szModVer : 5.3.0.0 offset : 0000c309 C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\httpd.exe.mdmp C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\appcompat.txt My questions 1) Does high CPU utilization/LOW RAM can also cause the HTTP server to crash ? 2) excessive file reading as in every 10 seconds ? 3) unlimited script execution time . I have set the maximum execution time in php script to 0 as my script has to execute for sometimes 2-3 days. Is there any way to avoid this ? 4) Access to Database ? Should we use lock before reading and writing Can these be the reasons for random wamp server crashes ? OR is is some other programming error ? Please guide me . Regards, Mithun

    Read the article

  • ps forrest for session id

    - by azatoth
    Often I want to get a nice readout what process are running and their relationship; I usually by habit runs ps auxfww and eventual grep for the process in question. Having been thinking about the problem I tried to create an oneliner to get the process tree in ps ufww format for all processes which has the session id specified by arbitrary process name(s); ending up in following code: ps ufww --sid=$(ps -C apache2 -o sess --no-headers | sort | uniq | grep -v -E '^ +0$' | awk 'NR==1{x=$0;next}NF{x=x","$0};END{gsub(/[[:space:]]*/,"",x);print x}') giving for example following output: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 4157 0.0 0.1 41264 3120 ? Ss Jun11 0:00 /usr/sbin/apache2 -k start www-data 4329 0.0 0.0 41264 1976 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4330 0.0 0.0 41264 2028 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4331 0.0 0.0 41264 2028 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4332 0.0 0.0 41264 2028 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 4333 0.0 0.0 41264 2032 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 6648 0.0 0.0 41264 1884 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 6654 0.0 0.0 41264 1884 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start www-data 6655 0.0 0.0 41264 1884 ? S Jun11 0:00 \_ /usr/sbin/apache2 -k start I do wonder now if anyone has an better idea to solve this issue? Are there anything out there that is easier to "oneline" and gives above or better information? For example I would actually want to have included all childs relative any parent. (uncertain if this should be on SF instead, but felt it was more like an programming question)

    Read the article

  • FreeRTOS Sleep Mode hazards while using MSP430f5438

    - by michael
    Hi, I wrote an an idle hook shown here void vApplicationIdleHook( void ) { asm("nop"); P1OUT &= ~0x01;//go to sleep lights off! LPM3;// LPM Mode - remove to make debug a little easier... asm("nop"); } That should cause the LED to turn off, and MSP430 to go to sleep when there is nothing to do. I turn the LED on during some tasks. I also made sure to modify the sleep mode bit in the SR upon exit of any interrupt that could possibly wake the MCU (with the exception of the scheduler tick isr in portext.s43. The macro in iar is __bic_SR_register_on_exit(LPM3_bits); // Exit Interrupt as active CPU However, it seems as though putting the MCU to sleep causes some irregular behavior. The led stays on always, although when i scope it, it will turn off for a couple instructions cycles when ever i wake the mcu via one of the interrupts (UART), and then turn back on. If I comment out the LPM3 instruction, things go as planned. The led stays off for most of the time and only comes on when a task is running. I am using a MSP4f305438 Any ideas?

    Read the article

  • iPhone openGLES performance tuning

    - by genesys
    Hey there! I'm trying now for quite a while to optimize the framerate of my game without really making progress. I'm running on the newest iPhone SDK and have a iPhone 3G 3.1.2 device. I invoke arround 150 drawcalls, rendering about 1900 Triangles in total (all objects are textured using two texturelayers and multitexturing. most textures come from the same textureAtlasTexture stored in pvrtc 2bpp compressed texture). This renders on my phone at arround 30 fps, which appears to me to be way too low for only 1900 triangles. I tried many things to optimize the performance, including batching together the objects, transforming the vertices on the CPU and rendering them in a single drawcall. this yelds 8 drawcalls (as oposed to 150 drawcalls), but performance is about the same (fps drop to arround 26fps) I'm using 32byte vertices stored in an interleaved array (12bytes position, 12bytes normals, 8bytes uv). I'm rendering triangleLists and the vertices are ordered in TriStrip order. I did some profiling but I don't really know how to interprete it. instruments-sampling using Instruments and Sampling yelds this result: http://neo.cycovery.com/instruments_sampling.gif telling me that a lot of time is spent in "mach_msg_trap". I googled for it and it seems this function is called in order to wait for some other things. But wait for what?? instruments-openGL instruments with the openGL module yelds this result: http://neo.cycovery.com/intstruments_openglES_debug.gif but here i have really no idea what those numbers are telling me shark profiling: profiling with shark didn't tell me much either: http://neo.cycovery.com/shark_profile_release.gif the largest number is 10%, spent by DrawTriangles - and the whole rest is spent in very small percentage functions Can anyone tell me what else I could do in order to figure out the bottleneck and could help me to interprete those profiling information? Thanks a lot!

    Read the article

  • Help with SQL server stack dump

    - by edosoft
    Hi guru's We're running SQL 2005 standard SP2 on a 4cpu box. Suddenly it crashdumps, after which all pooled connections are invalid and it goes into admin-only mode (only sa can connect) The short stackdump is below. After the dump a number of errors show up like '2008-09-16 10:49:34.48 Server Resource Monitor (0xec4) Worker 0x03D1C0E8 appears to be non-yielding on Node 0. Memory freed: 232408 KB. Approx CPU Used: kernel 203 ms, user 140 ms, Interval: 250250.' Have Googled around but couldn't find a definate answer. Anyone? 2008-09-16 10:46:24.98 Server Using 'dbghelp.dll' version '4.0.5' 2008-09-16 10:46:25.40 Server **Dump thread - spid = 0, PSS = 0x00000000, EC = 0x00000000 2008-09-16 10:46:25.40 Server ***Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\SQLDump0009.txt 2008-09-16 10:46:25.40 Server * ******************************************************************************* 2008-09-16 10:46:25.40 Server * 2008-09-16 10:46:25.40 Server * BEGIN STACK DUMP: 2008-09-16 10:46:25.40 Server * 09/16/08 10:46:25 spid 0 2008-09-16 10:46:25.42 Server * 2008-09-16 10:46:25.42 Server * Non-yielding Resource Monitor 2008-09-16 10:46:25.42 Server * 2008-09-16 10:46:25.42 Server * ******************************************************************************* 2008-09-16 10:46:25.42 Server * ------------------------------------------------------------------------------- 2008-09-16 10:46:25.42 Server * Short Stack Dump 2008-09-16 10:46:25.76 Server Stack Signature for the dump is 0x00000352 2008-09-16 10:46:32.70 Server External dump process return code 0x20000001.

    Read the article

  • Books and resources for Java Performance tuning - when working with databases, huge lists

    - by Arvind
    Hi All, I am relatively new to working on huge applications in Java. I am working on a Java web service which is pretty heavily used by various clients. The service basically queries the database (hibernate) and then works with a lot of Lists (there are adapters to convert list returned from DB to the interface which the service publishes) and I am seeing lot of issues with the service like high CPU usage or high heap space. While I can troubleshoot the performance issues using a profiler, I want to actually learn about what all I need to take care when I actually write code. Like what kind of List to use or things like using StringBuilder instead of String, etc... Is there any book or blogs which I can refer which will help me while I write new services? Also my application is multithreaded - each service call from a client is a new thread, and I want to know some best practices around that area as well. I did search the web but I found many tips which are not relevant in the latest Java 6 releases, so wanted to know what kind of resources would help a developer starting out now on Java for heavily used applications. Arvind

    Read the article

  • MySQL performance

    - by kapil.israni
    Hi, I have this LAMP application with about 900k rows in MySQL and I am having some performance issues. Background - Apart from the LAMP stack , there's also a Java process (multi-threaded) that runs in its own JVM. So together with LAMP & java, they form the complete solution. The java process is responsible for inserts/updates and few selects as well. These inserts/updates are usually in bulk/batch, anywhere between 5-150 rows. The PHP front-end code only does SELECT's. Issue - the PHP/SELECT queries become very slow when the java process is running. When the java process is stopped, SELECT's perform alright. I mean the performance difference is huge. When the java process is running, any action performed on the php front-end results in 80% and more CPU usage for mysqld process. Any help would be appreciated. MySQL is running with default parameters & settings. Software stack - Apache - 2.2.x MySQL -5.1.37-1ubuntu5 PHP - 5.2.10 Java - 1.6.0_15 OS - Ubuntu 9.10 (karmic)

    Read the article

  • Flash/Flex: "Warning: filter will not render" problem

    - by davidemm
    In my flex application, I have a custom TitleWindow that pops up in modal fashion. When I resize the browser window, I get this warning: Warning: Filter will not render. The DisplayObject’s filtered dimensions (1286, 107374879) are too large to be drawn. Clearly, I have nothing set with a height of 107374879. After that, any time I mouse over anything in the Flash Player (v. 10), the CPU churns at 100%. When I close the TitleWindow, the problem subsides. Sadly, the warning doesn't seem to indicate which DisplayObject object is too large to draw. I've tried attaching explicit height/widths to the TitleWindow and the components within, but still no luck. [Edit] The plot thickens: I found that the problem only occures when I set the PopUpManager's createPopUp modal parameter to "true." I don't see the behavior when modal is set to "false." It's failing while applying the graying filter to other components that comes from being modal. Any ideas how I can track down the one object that has not been initialized but is being filter during the modal phase? Thanks for reading.

    Read the article

  • Make Python Socket Server More Efficient

    - by BenMills
    I have very little experience working with sockets and multithreaded programming so to learn more I decided to see if I could hack together a little python socket server to power a chat room. I ended up getting it working pretty well but then I noticed my server's CPU usage spiked up over 100% when I had it running in the background. Here is my code in full: http://gist.github.com/332132 I know this is a pretty open ended question so besides just helping with my code are there any good articles I could read that could help me learn more about this? My full code: import select import socket import sys import threading from daemon import Daemon class Server: def __init__(self): self.host = '' self.port = 9998 self.backlog = 5 self.size = 1024 self.server = None self.threads = [] self.send_count = 0 def open_socket(self): try: self.server = socket.socket(socket.AF_INET6, socket.SOCK_STREAM) self.server.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) self.server.bind((self.host,self.port)) self.server.listen(5) print "Server Started..." except socket.error, (value,message): if self.server: self.server.close() print "Could not open socket: " + message sys.exit(1) def remove_thread(self, t): t.join() def send_to_children(self, msg): self.send_count = 0 for t in self.threads: t.send_msg(msg) print 'Sent to '+str(self.send_count)+" of "+str(len(self.threads)) def run(self): self.open_socket() input = [self.server,sys.stdin] running = 1 while running: inputready,outputready,exceptready = select.select(input,[],[]) for s in inputready: if s == self.server: # handle the server socket c = Client(self.server.accept(), self) c.start() self.threads.append(c) print "Num of clients: "+str(len(self.threads)) self.server.close() for c in self.threads: c.join() class Client(threading.Thread): def __init__(self,(client,address), server): threading.Thread.__init__(self) self.client = client self.address = address self.size = 1024 self.server = server self.running = True def send_msg(self, msg): if self.running: self.client.send(msg) self.server.send_count += 1 def run(self): while self.running: data = self.client.recv(self.size) if data: print data self.server.send_to_children(data) else: self.running = False self.server.threads.remove(self) self.client.close() """ Run Server """ class DaemonServer(Daemon): def run(self): s = Server() s.run() if __name__ == "__main__": d = DaemonServer('/var/servers/fserver.pid') if len(sys.argv) == 2: if 'start' == sys.argv[1]: d.start() elif 'stop' == sys.argv[1]: d.stop() elif 'restart' == sys.argv[1]: d.restart() else: print "Unknown command" sys.exit(2) sys.exit(0) else: print "usage: %s start|stop|restart" % sys.argv[0] sys.exit(2)

    Read the article

  • Terrible DotNetNuke performance

    - by Peter Bridger
    I'm involved with a project using DotNetNuke version 05.01.04 Community Edition. We are building our new Intranet using it, but performance is terrible. We have five people adding pages and content to it and every 15-30 seconds they experience a pause of 10 seconds or longer before the system continues and the next screens loads. The server is Windows 2003, 3.8GHz with 1GB of RAM. I'm told by our server admin that the CPU and memory performance don't appear to be the bottleneck. We currently have 350 pages in the system, we a plan to add 1000. So we need to resolve this performance problem so that we can enter content and so we can go live. I just can't see where the bottleneck is. Is there a good why to determine the bottleneck when using DotNetNuke? Modules installed Publish:Engage (Not currently in use) Page Blaster (Doesn't appear to providing caching when users logged in using Integrated Authentication) SimpleGallery XMod Content Manager IIS Setup Application recycling completely disabled (Apart from a 2am recycle) New findings: 18th March 2010 The main bottleneck was due to version 5.1.4 having a bug which caused 1300 database roundtrips on an average page, due to broken database in-memory caching. We've upgraded to 5.2.4 which has resolved this bottleneck. Now the next biggest bottleneck is the navigation. We've used both DDR:Menu and DDN:Nav, but both have a major impact on performance. Is there a navigation interface out there that doesn't drain performance so badly?

    Read the article

  • how could installations/configurations be easier in linux?

    - by ajsie
    although you can do anything in linux it tends to require a lot of tweaking in config files and reading a lot of manuals/tutorials before you can have it running in your way. i know that it gets a lot easier by time, and the apt-get installations with ubuntu/debian is heading the right way. but how can linux be more userfriendly for us in the future? i thought that if more is automated like an IDE environment, eg. typing svn will give us all the commands and description about each command when you move between commands with your keyboard. that would be great. but that's just one example. another is the navigation in the terminal between folders. now you have to type a lot just to jump from/to different folders. would be great with some more automatization here too. i know that these extra features will slow down the server, but its 2010 now, and these features are not that heavy for the cpu, but makes it more userfriendly and encourage maintainance of a server, not frighten u off. what do you think about this? should/could we have more user friendly linux environment in servers, something that has annoyed you a lot? a lot of things are done in the unix way, but maybe we should reinvent the wheel in some areas, cause apparently, its so...repeatingly today and difficult to do easy tasks. it should be easier i think..

    Read the article

  • Why does Tfs2010 build my Wix project before anything else?

    - by bwerks
    Hi all, A similar question was asked and answered about a year ago, but was either a different issue (everything was in beta) or misdiagnosed. It's located here: http://stackoverflow.com/questions/688162/msbuild-task-fails-because-any-cpu-solution-is-built-out-of-order. My issue is that I have a wix installer project, and after upgrading to Tfs2010 on monday, the build fails on linking because it can't find the build product of the Wpf application in the project. After some digging, it's because it hasn't been built yet. Building in Vs2010 works as normal. The wix project is set to depend on the Wpf project, and when viewing Project Build Order in the IDE, everything looks as normal. The problem was originally encountered with only two platform definitions in the solution; x86 and x64. There are also two flavors, Debug and Release, and TFSBuild.proj is set to build all four combinations. There was no occurence of AnyCPU anywhere. Per the referenced question above, I tried changing the Wpf project to use AnyCPU so that it would be built first. At this point, the wix project used the exact configuration and the Wpf project used the flavor with AnyCPU. However, doing so didn't seem to change anything. I'm using the Tfs2010 RTM, Vs2010 RTM, and the most recent version of Wix, which at the time of this writing is 3.5.1602.0, from 2010-04-02. Anyone else running into this?

    Read the article

  • Replace Temp with Query

    - by student
    The Replace Temp with Query refactoring method is recommended quite widely now but seems to be very inefficient for very little gain. The method from the Martin Fowler's site gives the following example: Extract the expression into a method. Replace all references to the temp with the expression. The new method can then be used in other methods. double basePrice = _quantity * _itemPrice; if (basePrice > 1000) return basePrice * 0.95; else return basePrice * 0.98; becomes if (basePrice() > 1000) return basePrice() * 0.95; else return basePrice() * 0.98; double basePrice() { return _quantity * _itemPrice; } Why is this a good idea? surely it means the calculation is needlessly repeated and you have the overhead of calling a function. I know CPU cycles are cheap but throwing them away like this seems careless? Am I missing something?

    Read the article

  • Updating the value of a math equation with YUI slider and simple radio buttons.

    - by dj lewis
    I have a form that is used to show a price for a product. I have a YUI slider setup that changes the price, and it works perfectly. Now I'm trying to add in radio buttons that also should update that same price value. The price displayed should take into account all 3 fields, and update dynamically as any are updated. This is the code I have, but I don't have any radio buttons for cpanelPrice yet as I'm still just trying to get the IPs to work. <script type="text/javascript"> (function() { var Event = YAHOO.util.Event, Dom = YAHOO.util.Dom, lang = YAHOO.lang, slider, bg="slider-bg", thumb="slider-thumb", orderlink="order-link", monthlyprice="monthly-price", dram="ram", stor="storage",dcpu="cpu",bandw="bandwidth",slid="sliderbg" // The slider can move 0 pixels up var topConstraint = 0; // The slider can move 200 pixels down var bottomConstraint = 585; // Custom scale factor for converting the pixel offset into a real value var scaleFactor = 1; // The amount the slider moves when the value is changed with the arrow // keys var keyIncrement = 65; var tickSize = 65; Event.onDOMReady(function() { slider = YAHOO.widget.Slider.getHorizSlider(bg, thumb, topConstraint, bottomConstraint, tickSize); slider.setValue(1, true); slider.animate = true; slider.getRealValue = function() { return Math.round(this.getValue() * scaleFactor); } slider.subscribe("change", function(offsetFromStart) { var ordnode = Dom.get(orderlink); var prinode = Dom.get(monthlyprice); var ramnode = Dom.get(dram); var stornode = Dom.get(stor); var cpunode = Dom.get(dcpu); var bwnode = Dom.get(bandw); var slidnode = Dom.get(slid); var actualValue = slider.getRealValue(); if (actualValue < 0) { var actualValue = 0; } if (actualValue > -1 && actualValue < 5) { basePrice = 15; var pid = "7"; var ram = "128 MB"; stornode.innerHTML = "5"; cpunode.innerHTML = ".5"; bwnode.innerHTML = "50"; slidnode.innerHTML = "<img src=\"/images/sliderbg1.png\" alt=\"\" />"; } else if (actualValue > 60 && actualValue < 70) { basePrice = 25; var pid = "8"; var ram = "256 MB"; stornode.innerHTML = "10"; cpunode.innerHTML = ".5"; bwnode.innerHTML = "100"; slidnode.innerHTML = "<img src=\"/images/sliderbg2.png\" alt=\"\" />"; } else if (actualValue > 125 && actualValue < 135) { basePrice = 40; var pid = "9"; var ram = "512 MB"; stornode.innerHTML = "20"; cpunode.innerHTML = "1"; bwnode.innerHTML = "200"; slidnode.innerHTML = "<img src=\"/images/sliderbg3.png\" alt=\"\" />"; } else if (actualValue > 190 && actualValue < 200) { basePrice = 60; var pid = "10"; var ram = "1 GB"; stornode.innerHTML = "40"; cpunode.innerHTML = "1"; bwnode.innerHTML = "400"; slidnode.innerHTML = "<img src=\"/images/sliderbg4.png\" alt=\"\" />"; } else if (actualValue> 255 && actualValue < 265) { basePrice = 80; var pid = "11"; var ram = "1.5 GB"; stornode.innerHTML = "60"; cpunode.innerHTML = "1"; bwnode.innerHTML = "600"; slidnode.innerHTML = "<img src=\"/images/sliderbg5.png\" alt=\"\" />"; } else if (actualValue > 320 && actualValue < 330) { basePrice = 110; var pid = "12"; var ram = "2 GB"; stornode.innerHTML = "80"; cpunode.innerHTML = "2"; bwnode.innerHTML = "800"; slidnode.innerHTML = "<img src=\"/images/sliderbg6.png\" alt=\"\" />"; } else if (actualValue > 385 && actualValue < 395) { basePrice = 140; var pid = "13"; var ram = "2.5 GB"; stornode.innerHTML = "100"; cpunode.innerHTML = "2"; bwnode.innerHTML = "1000"; slidnode.innerHTML = "<img src=\"/images/sliderbg7.png\" alt=\"\" />"; } else if (actualValue > 450 && actualValue < 460) { basePrice = 170; var pid = "14"; var ram = "3 GB"; stornode.innerHTML = "120"; cpunode.innerHTML = "3"; bwnode.innerHTML = "1200"; slidnode.innerHTML = "<img src=\"/images/sliderbg8.png\" alt=\"\" />"; } else if (actualValue > 515 && actualValue < 525) { basePrice = 200; var pid = "15"; var ram = "3.5 GB"; stornode.innerHTML = "140"; cpunode.innerHTML = "3"; bwnode.innerHTML = "1400"; slidnode.innerHTML = "<img src=\"/images/sliderbg9.png\" alt=\"\" />"; } else if (actualValue > 580 && actualValue < 590) { basePrice = 240; var pid = "16"; var ram = "4 GB"; stornode.innerHTML = "160"; cpunode.innerHTML = "4"; bwnode.innerHTML = "1600"; slidnode.innerHTML = "<img src=\"/images/sliderbg10.png\" alt=\"\" />"; } // Setup the order link ordnode.innerHTML = "<a href=\"https://account.hostingbeast.com/cart.php?a=add&pid=" + pid + "\"><img src=\"/images/blank.gif\" alt=\"Order VPS Hosting\" height=\"100\" width=\"100\" /></a>"; ramnode.innerHTML = ram; ipPrice = 0; function setIpPrice(ips) { ipPrice = ips.value; } cpanelPrice = 0; prinode.innerHTML = basePrice + ipPrice + cpanelPrice; }); // Use setValue to reset the value to white: Event.on("putval", "click", function(e) { slider.setValue(100, false); //false here means to animate if possible }); setTimeout(function () { slider.setValue(10); },0); }); })(); </script> <div style="width: 649px; margin:auto"> <span id="sliderbg"></span> <div class="yui-skin-sam"> <div id="slider-bg" class="yui-h-slider" tabindex="-1"> <div id="slider-thumb" class="yui-slider-thumb"><img src="/images/thumb-bar.png"></div> </div> </div> </div> <div class="vpsdetails"> <div id="vpsprod"><span id="cpu"></span></div> <div id="vpsram"><span id="ram"></span></div> <div id="vpsstor"><span id="storage"></span> GB</div> <div id="vpsbw"><span id="bandwidth"></span> GB</div> <div id="slideprice">$ <span id="monthly-price"></span></div> </div> <input type="radio" name="ips" value="2" onclick="setIpPrice(this.value - 2 * 2);" checked="checked" /> 2 <input type="radio" name="ips" value="4" onclick="setIpPrice(this.value - 2 * 2);" /> 4

    Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >