go goo go - Page 195 - Developer IT

Help with Java Program for Prime numbers

- by Ben

Hello everyone, I was wondering if you can help me with this program. I have been struggling with it for hours and have just trashed my code because the TA doesn't like how I executed it. I am completely hopeless and if anyone can help me out step by step, I would greatly appreciate it. In this project you will write a Java program that reads a positive integer n from standard input, then prints out the first n prime numbers. We say that an integer m is divisible by a non-zero integer d if there exists an integer k such that m = k d , i.e. if d divides evenly into m. Equivalently, m is divisible by d if the remainder of m upon (integer) division by d is zero. We would also express this by saying that d is a divisor of m. A positive integer p is called prime if its only positive divisors are 1 and p. The one exception to this rule is the number 1 itself, which is considered to be non-prime. A positive integer that is not prime is called composite. Euclid showed that there are infinitely many prime numbers. The prime and composite sequences begin as follows: Primes: 2, 3, 5, 7, 11, 13, 17, 19, 23, 29, … Composites: 1, 4, 6, 8, 9, 10, 12, 14, 15, 16, 18, 20, 21, 22, 24, 25, 26, 27, 28, … There are many ways to test a number for primality, but perhaps the simplest is to simply do trial divisions. Begin by dividing m by 2, and if it divides evenly, then m is not prime. Otherwise, divide by 3, then 4, then 5, etc. If at any point m is found to be divisible by a number d in the range 2 d m-1, then halt, and conclude that m is composite. Otherwise, conclude that m is prime. A moment’s thought shows that one need not do any trial divisions by numbers d which are themselves composite. For instance, if a trial division by 2 fails (i.e. has non-zero remainder, so m is odd), then a trial division by 4, 6, or 8, or any even number, must also fail. Thus to test a number m for primality, one need only do trial divisions by prime numbers less than m. Furthermore, it is not necessary to go all the way up to m-1. One need only do trial divisions of m by primes p in the range 2 p m . To see this, suppose m 1 is composite. Then there exist positive integers a and b such that 1 < a < m, 1 < b < m, and m = ab . But if both a m and b m , then ab m, contradicting that m = ab . Hence one of a or b must be less than or equal to m . To implement this process in java you will write a function called isPrime() with the following signature: static boolean isPrime(int m, int[] P) This function will return true or false according to whether m is prime or composite. The array argument P will contain a sufficient number of primes to do the testing. Specifically, at the time isPrime() is called, array P must contain (at least) all primes p in the range 2 p m . For instance, to test m = 53 for primality, one must do successive trial divisions by 2, 3, 5, and 7. We go no further since 11 53 . Thus a precondition for the function call isPrime(53, P) is that P[0] = 2 , P[1] = 3 , P[2] = 5, and P[3] = 7 . The return value in this case would be true since all these divisions fail. Similarly to test m =143 , one must do trial divisions by 2, 3, 5, 7, and 11 (since 13 143 ). The precondition for the function call isPrime(143, P) is therefore P[0] = 2 , P[1] = 3 , P[2] = 5, P[3] = 7 , and P[4] =11. The return value in this case would be false since 11 divides 143. Function isPrime() should contain a loop that steps through array P, doing trial divisions. This loop should terminate when 2 either a trial division succeeds, in which case false is returned, or until the next prime in P is greater than m , in which case true is returned. Function main() in this project will read the command line argument n, allocate an int array of length n, fill the array with primes, then print the contents of the array to stdout according to the format described below. In the context of function main(), we will refer to this array as Primes[]. Thus array Primes[] plays a dual role in this project. On the one hand, it is used to collect, store, and print the output data. On the other hand, it is passed to function isPrime() to test new integers for primality. Whenever isPrime() returns true, the newly discovered prime will be placed at the appropriate position in array Primes[]. This process works since, as explained above, the primes needed to test an integer m range only up to m , and all of these primes (and more) will already be stored in array Primes[] when m is tested. Of course it will be necessary to initialize Primes[0] = 2 manually, then proceed to test 3, 4, … for primality using function isPrime(). The following is an outline of the steps to be performed in function main(). • Check that the user supplied exactly one command line argument which can be interpreted as a positive integer n. If the command line argument is not a single positive integer, your program will print a usage message as specified in the examples below, then exit. • Allocate array Primes[] of length n and initialize Primes[0] = 2 . • Enter a loop which will discover subsequent primes and store them as Primes[1] , Primes[2], Primes[3] , ……, Primes[n -1] . This loop should contain an inner loop which walks through successive integers and tests them for primality by calling function isPrime() with appropriate arguments. • Print the contents of array Primes[] to stdout, 10 to a line separated by single spaces. In other words Primes[0] through Primes[9] will go on line 1, Primes[10] though Primes[19] will go on line 2, and so on. Note that if n is not a multiple of 10, then the last line of output will contain fewer than 10 primes. Your program, which will be called Prime.java, will produce output identical to that of the sample runs below. (As usual % signifies the unix prompt.) % java Prime Usage: java Prime [PositiveInteger] % java Prime xyz Usage: java Prime [PositiveInteger] % java Prime 10 20 Usage: java Prime [PositiveInteger] % java Prime 75 2 3 5 7 11 13 17 19 23 29 31 37 41 43 47 53 59 61 67 71 73 79 83 89 97 101 103 107 109 113 127 131 137 139 149 151 157 163 167 173 179 181 191 193 197 199 211 223 227 229 233 239 241 251 257 263 269 271 277 281 283 293 307 311 313 317 331 337 347 349 353 359 367 373 379 % 3 As you can see, inappropriate command line argument(s) generate a usage message which is similar to that of many unix commands. (Try doing the more command with no arguments to see such a message.) Your program will include a function called Usage() having signature static void Usage() that prints this message to stderr, then exits. Thus your program will contain three functions in all: main(), isPrime(), and Usage(). Each should be preceded by a comment block giving it’s name, a short description of it’s operation, and any necessary preconditions (such as those for isPrime().) See examples on the webpage.

Read the article

Am I just not understanding TDD unit testing (Asp.Net MVC project)?

- by KallDrexx

I am trying to figure out how to correctly and efficiently unit test my Asp.net MVC project. When I started on this project I bought the Pro ASP.Net MVC, and with that book I learned about TDD and unit testing. After seeing the examples, and the fact that I work as a software engineer in QA in my current company, I was amazed at how awesome TDD seemed to be. So I started working on my project and went gun-ho writing unit tests for my database layer, business layer, and controllers. Everything got a unit test prior to implementation. At first I thought it was awesome, but then things started to go downhill. Here are the issues I started encountering: I ended up writing application code in order to make it possible for unit tests to be performed. I don't mean this in a good way as in my code was broken and I had to fix it so the unit test pass. I mean that abstracting out the database to a mock database is impossible due to the use of linq for data retrieval (using the generic repository pattern). The reason is that with linq-sql or linq-entities you can do joins just by doing: var objs = select p from _container.Projects select p.Objects; However, if you mock the database layer out, in order to have that linq pass the unit test you must change the linq to be var objs = select p from _container.Projects join o in _container.Objects on o.ProjectId equals p.Id select o; Not only does this mean you are changing your application logic just so you can unit test it, but you are making your code less efficient for the sole purpose of testability, and getting rid of a lot of advantages using an ORM has in the first place. Furthermore, since a lot of the IDs for my models are database generated, I proved to have to write additional code to handle the non-database tests since IDs were never generated and I had to still handle those cases for the unit tests to pass, yet they would never occur in real scenarios. Thus I ended up throwing out my database unit testing. Writing unit tests for controllers was easy as long as I was returning views. However, the major part of my application (and the one that would benefit most from unit testing) is a complicated ajax web application. For various reasons I decided to change the app from returning views to returning JSON with the data I needed. After this occurred my unit tests became extremely painful to write, as I have not found any good way to write unit tests for non-trivial json. After pounding my head and wasting a ton of time trying to find a good way to unit test the JSON, I gave up and deleted all of my controller unit tests (all controller actions are focused on this part of the app so far). So finally I was left with testing the Service layer (BLL). Right now I am using EF4, however I had this issue with linq-sql as well. I chose to do the EF4 model-first approach because to me, it makes sense to do it that way (define my business objects and let the framework figure out how to translate it into the sql backend). This was fine at the beginning but now it is becoming cumbersome due to relationships. For example say I have Project, User, and Object entities. One Object must be associated to a project, and a project must be associated to a user. This is not only a database specific rule, these are my business rules as well. However, say I want to do a unit test that I am able to save an object (for a simple example). I now have to do the following code just to make sure the save worked: User usr = new User { Name = "Me" }; _userService.SaveUser(usr); Project prj = new Project { Name = "Test Project", Owner = usr }; _projectService.SaveProject(prj); Object obj = new Object { Name = "Test Object" }; _objectService.SaveObject(obj); // Perform verifications There are many issues with having to do all this just to perform one unit test. There are several issues with this. For starters, if I add a new dependency, such as all projects must belong to a category, I must go into EVERY single unit test that references a project, add code to save the category then add code to add the category to the project. This can be a HUGE effort down the road for a very simple business logic change, and yet almost none of the unit tests I will be modifying for this requirement are actually meant to test that feature/requirement. If I then add verifications to my SaveProject method, so that projects cannot be saved unless they have a name with at least 5 characters, I then have to go through every Object and Project unit test to make sure that the new requirement doesn't make any unrelated unit tests fail. If there is an issue in the UserService.SaveUser() method it will cause all project, and object unit tests to fail and it the cause won't be immediately noticeable without having to dig through the exceptions. Thus I have removed all service layer unit tests from my project. I could go on and on, but so far I have not seen any way for unit testing to actually help me and not get in my way. I can see specific cases where I can, and probably will, implement unit tests, such as making sure my data verification methods work correctly, but those cases are few and far between. Some of my issues can probably be mitigated but not without adding extra layers to my application, and thus making more points of failure just so I can unit test. Thus I have no unit tests left in my code. Luckily I heavily use source control so I can get them back if I need but I just don't see the point. Everywhere on the internet I see people talking about how great TDD unit tests are, and I'm not just talking about the fanatical people. The few people who dismiss TDD/Unit tests give bad arguments claiming they are more efficient debugging by hand through the IDE, or that their coding skills are amazing that they don't need it. I recognize that both of those arguments are utter bullocks, especially for a project that needs to be maintainable by multiple developers, but any valid rebuttals to TDD seem to be few and far between. So the point of this post is to ask, am I just not understanding how to use TDD and automatic unit tests?

Read the article

Matlab code works with one version but not the other

- by user1325655

I have a code that works in Matlab version R2010a but shows errors in matlab R2008a. I am trying to implement a self organizing fuzzy neural network with extended kalman filter. I have the code running but it only works in matlab version R2010a. It doesn't work with other versions. Any help? Code attach function [ c, sigma , W_output ] = SOFNN( X, d, Kd ) %SOFNN Self-Organizing Fuzzy Neural Networks %Input Parameters % X(r,n) - rth traning data from nth observation % d(n) - the desired output of the network (must be a row vector) % Kd(r) - predefined distance threshold for the rth input %Output Parameters % c(IndexInputVariable,IndexNeuron) % sigma(IndexInputVariable,IndexNeuron) % W_output is a vector %Setting up Parameters for SOFNN SigmaZero=4; delta=0.12; threshold=0.1354; k_sigma=1.12; %For more accurate results uncomment the following %format long; %Implementation of a SOFNN model [size_R,size_N]=size(X); %size_R - the number of input variables c=[]; sigma=[]; W_output=[]; u=0; % the number of neurons in the structure Q=[]; O=[]; Psi=[]; for n=1:size_N x=X(:,n); if u==0 % No neuron in the structure? c=x; sigma=SigmaZero*ones(size_R,1); u=1; Psi=GetMePsi(X,c,sigma); [Q,O] = UpdateStructure(X,Psi,d); pT_n=GetMeGreatPsi(x,Psi(n,:))'; else [Q,O,pT_n] = UpdateStructureRecursively(X,Psi,Q,O,d,n); end; KeepSpinning=true; while KeepSpinning %Calculate the error and if-part criteria ae=abs(d(n)-pT_n*O); %approximation error [phi,~]=GetMePhi(x,c,sigma); [maxphi,maxindex]=max(phi); % maxindex refers to the neuron's index if ae>delta if maxphi<threshold %enlarge width [minsigma,minindex]=min(sigma(:,maxindex)); sigma(minindex,maxindex)=k_sigma*minsigma; Psi=GetMePsi(X,c,sigma); [Q,O] = UpdateStructure(X,Psi,d); pT_n=GetMeGreatPsi(x,Psi(n,:))'; else %Add a new neuron and update structure ctemp=[]; sigmatemp=[]; dist=0; for r=1:size_R dist=abs(x(r)-c(r,1)); distIndex=1; for j=2:u if abs(x(r)-c(r,j))<dist distIndex=j; dist=abs(x(r)-c(r,j)); end; end; if dist<=Kd(r) ctemp=[ctemp; c(r,distIndex)]; sigmatemp=[sigmatemp ; sigma(r,distIndex)]; else ctemp=[ctemp; x(r)]; sigmatemp=[sigmatemp ; dist]; end; end; c=[c ctemp]; sigma=[sigma sigmatemp]; Psi=GetMePsi(X,c,sigma); [Q,O] = UpdateStructure(X,Psi,d); KeepSpinning=false; u=u+1; end; else if maxphi<threshold %enlarge width [minsigma,minindex]=min(sigma(:,maxindex)); sigma(minindex,maxindex)=k_sigma*minsigma; Psi=GetMePsi(X,c,sigma); [Q,O] = UpdateStructure(X,Psi,d); pT_n=GetMeGreatPsi(x,Psi(n,:))'; else %Do nothing and exit the while KeepSpinning=false; end; end; end; end; W_output=O; end function [Q_next, O_next,pT_n] = UpdateStructureRecursively(X,Psi,Q,O,d,n) %O=O(t-1) O_next=O(t) p_n=GetMeGreatPsi(X(:,n),Psi(n,:)); pT_n=p_n'; ee=abs(d(n)-pT_n*O); %|e(t)| temp=1+pT_n*Q*p_n; ae=abs(ee/temp); if ee>=ae L=Q*p_n*(temp)^(-1); Q_next=(eye(length(Q))-L*pT_n)*Q; O_next=O + L*ee; else Q_next=eye(length(Q))*Q; O_next=O; end; end function [ Q , O ] = UpdateStructure(X,Psi,d) GreatPsiBig = GetMeGreatPsi(X,Psi); %M=u*(r+1) %n - the number of observations [M,~]=size(GreatPsiBig); %Others Ways of getting Q=[P^T(t)*P(t)]^-1 %************************************************************************** %opts.SYM = true; %Q = linsolve(GreatPsiBig*GreatPsiBig',eye(M),opts); % %Q = inv(GreatPsiBig*GreatPsiBig'); %Q = pinv(GreatPsiBig*GreatPsiBig'); %************************************************************************** Y=GreatPsiBig\eye(M); Q=GreatPsiBig'\Y; O=Q*GreatPsiBig*d'; end %This function works too with x % (X=X and Psi is a Matrix) - Gets you the whole GreatPsi % (X=x and Psi is the row related to x) - Gets you just the column related with the observation function [GreatPsi] = GetMeGreatPsi(X,Psi) %Psi - In a row you go through the neurons and in a column you go through number of %observations **** Psi(#obs,IndexNeuron) **** GreatPsi=[]; [N,U]=size(Psi); for n=1:N x=X(:,n); GreatPsiCol=[]; for u=1:U GreatPsiCol=[ GreatPsiCol ; Psi(n,u)*[1; x] ]; end; GreatPsi=[GreatPsi GreatPsiCol]; end; end function [phi, SumPhi]=GetMePhi(x,c,sigma) [r,u]=size(c); %u - the number of neurons in the structure %r - the number of input variables phi=[]; SumPhi=0; for j=1:u % moving through the neurons S=0; for i=1:r % moving through the input variables S = S + ((x(i) - c(i,j))^2) / (2*sigma(i,j)^2); end; phi = [phi exp(-S)]; SumPhi = SumPhi + phi(j); %phi(u)=exp(-S) end; end %This function works too with x, it will give you the row related to x function [Psi] = GetMePsi(X,c,sigma) [~,u]=size(c); [~,size_N]=size(X); %u - the number of neurons in the structure %size_N - the number of observations Psi=[]; for n=1:size_N [phi, SumPhi]=GetMePhi(X(:,n),c,sigma); PsiTemp=[]; for j=1:u %PsiTemp is a row vector ex: [1 2 3] PsiTemp(j)=phi(j)/SumPhi; end; Psi=[Psi; PsiTemp]; %Psi - In a row you go through the neurons and in a column you go through number of %observations **** Psi(#obs,IndexNeuron) **** end; end

Read the article

Web browsing is fast, but downloads are slow

- by Ricket

I work for a company on my university's campus, helping with general IT problems and some web development. But lately there has been a problem that has me and my boss completely stumped. We, plus one contractor, make up the entire IT department, so I'm reaching out to you for help. All around the office, we have wall jacks. These collect in a closet down the hall and all plug into a switch. This switch, along with our individual server jacks, plugs into another switch, and that switch plugs into our firewall hardware. Then the firewall is connected out to our campus network. Our campus internet is, well, very fast. I don't know exactly the terms, tiers, etc., but we have thousands of students and downloads can run as fast as 10 MB/s at night; uploads are sometimes even faster. I think we're practically ISP level. In short, I have a lot of faith that it is not the campus side of things that is causing a problem, combined with other evidence I'll mention in a moment. So our symptoms: web browsing is fast. Web pages, images, etc. load instantly. No problems there. But then when I go to download something, the download starts fast but very quickly (a matter of seconds) drops to nearly 0. Often it will actually drop to 0 and time out. This happens with even very small files, 1 MB or less. It smells to me like a QoS sort of thing. I'm not entirely sure, and I wanted to get your opinions first. My boss is hesitant to touch our firewall, much less let me touch it, and it was set up and is managed by a consultant remotely. These problems don't seem tied to a time of the day. I've tried downloads after 5:00 and still the same thing happens. From my desk, I can turn on my wireless adapter and pick up the campus wireless access point. If I unplug ethernet and connect to it, downloads are fast. This adds to my suspicion that it's limited to our company network. Also, a number of weeks ago the consultant upgraded our firewall firmware. Suddenly everything was very fast. I tested with downloads from Sun and speedtest.net and things were blazing fast, as they should be with our campus internet! It was wonderful, and I figured the slow speeds were an old firmware bug. In a matter of days, things steadily declined until they were back to the old symptoms. Oh, and we have antivirus installed on every computer, and we keep it up to date. Though I suppose the possibility is still there that someone could have spyware which is bogging down our internet, in which case what is the easiest/best way to find this out? (maybe this should go in a separate question) Thank you for your patience in reading all of this. Do you have any ideas as to what I can try? Is this something that you've experienced before? What sort of tools or methods can I use to try and diagnose the problem? P.S. everything here is Windows. Windows Server 2003 and 2008 on our servers, and Windows XP on employees' machines. Update: We are submitting a ticket to the university to just take a look and see if they see anything unusual and/or can suggestion methods for us to try and pinpoint our problem. Hopefully they'll be helpful! I'll update this to let you know what goes on. Update again: We found a hub (yes, a HUB) right between our campus connection and our firewall. It had only those two ethernet cables plugged into it, nothing else. After removing the hub, our speeds have jumped up to several mbps. However in talking with the campus, we got them to run a gigabit line to our firewall in place of the 100mbps line. As of friday, we are at about 65 mbps up and down (according to speedtest.net at 8am)!! Go NC State!!

Read the article

How do I make solr/jetty find the installed slf4j jars in Ubuntu 12.04?

- by J. Pablo Fernández

I'm running Ubuntu 12.04's packaged Jetty in which I installed solr 4.3.1 (by copying the war file to /var/lib/jetty/webapps. When I start Jetty, I get this error: failed SolrRequestFilter: org.apache.solr.common.SolrException: Could not find necessary SLF4j logging jars. If using Jetty, the SLF4j logging jars need to go in the jetty lib/ext directory. The package libslf4j-java is installed, and the jars are in /usr/share/java: /usr/share/java/log4j-over-slf4j.jar /usr/share/java/slf4j-api.jar /usr/share/java/slf4j-jcl.jar /usr/share/java/slf4j-jdk14.jar /usr/share/java/slf4j-log4j12.jar /usr/share/java/slf4j-migrator.jar /usr/share/java/slf4j-nop.jar /usr/share/java/slf4j-simple.jar but somehow, Jetty and/or Solr are not finding them. How do I make them find them? or how do I install some other jars where jetty/solr would find them? The full error is: 88 [main] INFO org.mortbay.log - jetty-6.1.24 443 [main] INFO org.mortbay.log - Deploy /etc/jetty/contexts/javadoc.xml -> org.mortbay.jetty.handler.ContextHandler@cec0c5{/javadoc,file:/usr/share/jetty/javadoc} 522 [main] INFO org.mortbay.log - Extract file:/var/lib/jetty/webapps/solr.war to /var/cache/jetty/data/Jetty__8080_solr.war__solr__zdafkg/webapp 1501 [main] WARN org.mortbay.log - failed SolrRequestFilter: org.apache.solr.common.SolrException: Could not find necessary SLF4j logging jars. If using Jetty, the SLF4j logging jars need to go in the jetty lib/ext directory. For other containers, the corresponding directory should be used. For more information, see: http://wiki.apache.org/solr/SolrLogging 1501 [main] ERROR org.mortbay.log - Failed startup of context org.mortbay.jetty.webapp.WebAppContext@5329c5{/solr,file:/var/lib/jetty/webapps/solr.war} org.apache.solr.common.SolrException: Could not find necessary SLF4j logging jars. If using Jetty, the SLF4j logging jars need to go in the jetty lib/ext directory. For other containers, the corresponding directory should be used. For more information, see: http://wiki.apache.org/solr/SolrLogging at org.apache.solr.servlet.SolrDispatchFilter.<init>(SolrDispatchFilter.java:105) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45) at java.lang.reflect.Constructor.newInstance(Constructor.java:532) at java.lang.Class.newInstance0(Class.java:374) at java.lang.Class.newInstance(Class.java:327) at org.mortbay.jetty.servlet.Holder.newInstance(Holder.java:153) at org.mortbay.jetty.servlet.FilterHolder.doStart(FilterHolder.java:92) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.servlet.ServletHandler.initialize(ServletHandler.java:662) at org.mortbay.jetty.servlet.Context.startContext(Context.java:140) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:518) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130) at org.mortbay.jetty.Server.doStart(Server.java:224) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.mortbay.start.Main.invokeMain(Main.java:194) at org.mortbay.start.Main.start(Main.java:534) at org.mortbay.jetty.start.daemon.Bootstrap.start(Bootstrap.java:30) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:243) Caused by: java.lang.NoClassDefFoundError: org/slf4j/LoggerFactory at org.apache.solr.servlet.SolrDispatchFilter.<init>(SolrDispatchFilter.java:103) ... 36 more Caused by: java.lang.ClassNotFoundException: org.slf4j.LoggerFactory at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:392) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:363) ... 37 more 1505 [main] WARN org.mortbay.log - failed org.mortbay.jetty.webapp.WebAppContext@5329c5{/solr,file:/var/lib/jetty/webapps/solr.war}: java.lang.NoClassDefFoundError: org/slf4j/Logger 1579 [main] WARN org.mortbay.log - failed ContextHandlerCollection@19d0a1: java.lang.NoClassDefFoundError: org/slf4j/Logger 1582 [main] INFO org.mortbay.log - Opened /var/log/jetty/2013_06_27.request.log 1582 [main] WARN org.mortbay.log - failed HandlerCollection@cbf30e: java.lang.NoClassDefFoundError: org/slf4j/Logger 1582 [main] ERROR org.mortbay.log - Error starting handlers java.lang.NoClassDefFoundError: org/slf4j/Logger at java.lang.Class.getDeclaredMethods0(Native Method) at java.lang.Class.privateGetDeclaredMethods(Class.java:2454) at java.lang.Class.getMethod0(Class.java:2697) at java.lang.Class.getMethod(Class.java:1622) at org.mortbay.log.Log.unwind(Log.java:228) at org.mortbay.log.Log.warn(Log.java:197) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:475) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152) at org.mortbay.jetty.handler.ContextHandlerCollection.doStart(ContextHandlerCollection.java:156) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.handler.HandlerCollection.doStart(HandlerCollection.java:152) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java:130) at org.mortbay.jetty.Server.doStart(Server.java:224) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at org.mortbay.xml.XmlConfiguration.main(XmlConfiguration.java:985) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.mortbay.start.Main.invokeMain(Main.java:194) at org.mortbay.start.Main.start(Main.java:534) at org.mortbay.jetty.start.daemon.Bootstrap.start(Bootstrap.java:30) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) at java.lang.reflect.Method.invoke(Method.java:616) at org.apache.commons.daemon.support.DaemonLoader.start(DaemonLoader.java:243) Caused by: java.lang.ClassNotFoundException: org.slf4j.Logger at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:392) at org.mortbay.jetty.webapp.WebAppClassLoader.loadClass(WebAppClassLoader.java:363) ... 29 more

Read the article

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012

- by mseika

SOA PARTNER COMMUNITY NEWSLETTER JULY 2012 Dear SOA partner community member To provide our community members the best of our knowledge, we want your feedback on our SOA Partner community. Thus we are organizing SOA Partner Community Survey 2012. We request you to participate in the survey and give your valuable feedback on various areas of marketing, sales and education. To continue our successful BPM Suite, Oracle is launching together with you Process Accelerators initiative. It’s your opportunity to co-develop and market predefined processes. Oracle Fusion Applications Design Patterns are a great tool to develop your SOA or BPM solution or process accelerators. To promote your SOA & BPM Specialization we continue to offer several benefits. This month we would like to highlight our Specialization Plaques - make sure you request one for your office! Our Fusion Middleware Summer Camps are booked out, if could not get a seat you can attend the SOA & BPM track @ Virtual Developer Day: Oracle Fusion Development Oracle demo systems offer´s two new demos: Business Driven Development based on BPM Suite & SOA Lifecycle Management. Jürgen KressOracle SOA & BPM Partner Adoption EMEA NEW CONTENT Community SurveyProcess Accelerators KitPlaques SOA & BPM SpecializedSOA & BPM at Virtual Developer Day News from our Partners & CommunityOverview of SOA Diagnostics in 11.1.1.6 Business driven development(BDD) demo now available! SOA Lifecycle Management Oracle Fusion applications design patterns Updated material by Oracle Connect and Network SOA Blogs SOA on Facebook SOA on LinkedIn SOA on Twitter Mix SOA Forum COMMUNITY SURVEY Like every year we would like to get your feedback in our SOA Partner Community Survey 2012. Make sure that You attend to further develop our community and support our planning! It is key for us to get your feedback to prepare for the next fiscal year. Back to top PROCESS ACCELERATORS KIT Oracle is very interested to co-develop and market with you, our partners, pre-defined processes for BPM Suite.I am very happy to announce a new program called “Oracle BPM Partner Solution Catalog”. This program will provide a one-stop shop for our customers looking for Oracle BPM partner solutions available in the market today.The Oracle BPM Solution Catalog will be hosted on our very popular Oracle Technology Network (OTN). To give you an idea of the scale of customer visibility, OTN today receives over 1Million hits per day from our business and developer community. We would like to invite you to list your Oracle BPM 11g solutions available today.In order to participate in this program, you need to do the following: Fill in the attached slide templates - #3 and #4 for each Oracle BPM 11g solution you would like to list on OTN.Please add links to whitepapers , videos, references to the specific solution in the template slide. We recommend that you create a landing page on your website for these linked artifacts and just point to the same from within the PowerPoint template. This will give you the flexibility to update the information as frequently as needed. If you have the particular solution in production or a reference available, please list them as well. Send the PowerPoint template slides (1 set of slides for each Oracle BPM solution) to [email protected]. In addition to having the opportunity to list your solutions on OTN for Oracle customers, you will have the chance to advertise your new wins/implementations/solutions in an Oracle Sponsored PM Webinar held every quarter. This program is targeted to go live by the end of summer 2012. At this point, we are targeting a soft launch in July end 2012 so send on your BPM solutions information as soon as possible. We would love to have your solution(s) listed in the “Oracle BPM Partner Solution Catalog” at the time of the launch. This will be a live repository so you can keep adding more solutions as they become available. If you have any questions, please feel free to contact us [email protected], Product Strategy Director, Oracle BPM , Phone +1 650.506.5486.Thank you and look forward to hearing from you. Oracle BPM team Process Accelerators Overview.pdf ProcessAcceleratorsDataSheet.pdf Demos draUPK.zip & trmUPK.zip BPM Solution repository slides.ppt Additional BPM material BPM Process Development Lifecycle Document that describes recommended approach to collaborative process modeling across business and IT tools ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization) by Andrejus Baranovskis BPMN process editor problems in 11.1.1.6 by Mark Nelson BPM – Disable DBMS job to refresh B2B Materialized View by Mark Nelson For the complete kit please visit the BPM folder at our SOA Community Workspace (SOA Community membership required). For the complete presentation please visit our SOA Community Workspace (SOA Community membership required). Information is Oracle and Partner confidential! Back to top PLAQUES SOA & BPM SPECIALIZED We continue to offer you a nice SOA & BPM Specialization plaque with your logo to proof your success. If you are a SOA or BPM Specialized partner and would like to request the plaque please send Brigitte an e-mail with the following information: Partner Name Partner logo (preferred eps file) Partner Status gold or platinum Your shipping address Your Specialization: SOA or BPM We recommend to mount the plaque at your office reception in addition you can use the SOA Specialization logos at your website download Logo: Gold & Platinum or the BPM logos Gold & Platinum Back to top SOA & BPM AT VIRTUAL DEVELOPER DAY Register now for this FREE hands-on online workshop Get up to date and learn everything you wanted to know about Oracle ADF & Fusion Development plus live Q&A chats with Oracle technical staffOracle Application Development Framework (ADF) is the standards based, strategic framework for Oracle Fusion Applications and Oracle Fusion Middleware. Oracle ADF’s integration with the Oracle SOA Suite, Oracle WebCenter and Oracle BI creates a complete productive development platform for your custom applications.Join us at this FREE virtual event and learn the latest in Fusion Development including: Is Oracle ADF development faster and simpler than Forms, Apex or .Net? Mobile Application Development with ADF Mobile Oracle ADF development with Eclipse Oracle WebCenter Portal and ADF Development Application Lifecycle Management with ADF Building Process Centric Applications with ADF and BPM Oracle Business Intelligence and ADF Integration Live Q&A chats with Oracle technical staff Developer lead, manager or architect - this event has something for everyone. Don’t miss this opportunity.Tuesday, July 10, 2012. 9:00 a.m. PT -1:00 p.m. PT 11:00 a.m. CT - 3:00 p.m. CT 12:00 p.m. ET - 4:00 p.m. ET 1:00 p.m. BRT - 5:00 p.m. BRT Register online now! for this FREE event. Agenda: 09:00 am Opening 09:30 am Keynote: Oracle Fusion Development Track1Introduction to Fusion Development Track2What's New in Fusion Development Track3Fusion Development in the Enterprise 10:00 am Is Oracle ADF Development Faster and Simpler than Oracle Forms, APEX or .Net? Mobile Application Development with ADF Mobile Oracle WebCenter Portal and ADF Development 11:00 am Rich Web UI made simple - an ADF Faces Overview Oracle Enterprise Pack for Eclipse - ADF Development Building Process Centric Applications with ADF and BPM 12:00 noon Next Generation Controller for JSF Application Lifecycle Management for ADF Oracle Business Intelligence and ADF Integration *Hands On Lab – WebCenter and ADF Lab w/ JDeveloper - Lab materials will be provided ahead of the event to give you ample time to work through the lab and increase the productivity of the live chat sessions the day of the event. Sessions abstractsRegister online now! for this FREE event Read more on Community Events and post your comment here. Back to top NEWS FROM OUR PARTNERS AND COMMUNITY Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity JDeveloper & ADF?Troubleshooting BPMN process editor problems in 11.1.1.6http://dlvr.it/1p0FfS SOA Community?SOA & BPM @ Virtual Developer Day: Oracle Fusion Development - July 10th 2012https://soacommunity.wordpress.com/2012/07/02/soa-bpm-virtual-developer-day- oracle-fusion-developmentjuly-10th-2012/#soacommunity #soa #bom #education orclateamsoa ?A-Team Blog #ateam: BAM design pointers - In working recently with a large Oracle customer on SOA and BAM, I discove.http://ow.ly/1kYqES SOA CommunitySOA Community Newsletter June 2012http://wp.me/p10C8u-qw SOA CommunityBPMN process editor problems in 11.1.1.6 by Mark Nelsonhttp://redstack.wordpress.com/2012/06/27/ bpmn-process-editor-problems-in-11-1-1-6 #soacommunity #bpm OTNArchBeat ?SOA Learning Library: free short, topic-focused training on Oracle SOA & BPM products | @SOACommunity http://pub.vitrue.com/NE1G Andrejus Baranovskis ?ADF 11g PS5 Application with Customized BPM Worklist Task Flow (MDS Seeded Customization)http://fb.me/1coX4r1X1 SOA CommunitySOA Learning Library provides a comprehensive curriculum for the SOA and BPM product suites https://soacommunity.wordpress.com/2012/06/27/soa-learning-library #soacommunity #soa #bpm OTNArchBeat ?A Universal JMX Client for Weblogic - Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koserhttp://pub.vitrue.com/mQVZ OTNArchBeat ?BPM - Disable DBMS job to refresh B2B Materialized View | Mark Nelson http://pub.vitrue.com/3PR0Oracle SOA ?Learn how Choice Hotels Implements Innovative Google Maps Solution with #OracleSOA http://bit.ly/MTwIJ3 SOA Communitytop Tweets SOA Partner Community - June 2012 Send your tweets @soacommunity #soacommunity https://soacommunity.wordpress.com/2012/06/25/top-tweets-soa-partner-community-june-2012 Torsten Winterberg#OPITZ is pushing Oracle commitment to the next level: New Specializations done: ADF, BPM, WLS, Exadatahttp://bit.ly/KX1WVS ServiceTechSymposium ?Only 8 more days left until Super Early Bird Registration Discount expires! http://www.servicetechsymposium.com OracleBlogsSOA Management in 3 minutes - Video explainerhttp://ow.ly/1kN5pn SOA Community ?SOA, Cloud & Service Technology Symposium 2012 London - Enter Promo Code: Djmxz370https://soacommunity.wordpress.com/2012/06/22/soa-cloud-service-technology-symposium-2012-london #soasymposium #soacommunity #soa Heidi BuelowGreat course! w David Read RT @soacommunity: product management ADF for BPM training 5 seats left https://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity SOA Community ?product management ADF for BPM training 5 seats lefthttps://soacommunity.wordpress.com/2012/06/12/fusion-middleware-summer-campsadvanced-partner-trainings/ #bpm #soacommunity OTNArchBeat ?Oacle Fusion Applications Design Patterns Now Available For Developers | Ultan O'Broinhttp://pub.vitrue.com/UEiF OTNArchBeat ?SOA, Cloud & Service Technology Symposium 2012London - Special Oracle Discounthttp://pub.vitrue.com/8E0J SOA CommunityBecome a facebook fan of soacommunity http://www.facebook.com/soacommunity #soacommunity SOA Community ?SOA Suite HealthCare Integration Architecture https://blogs.oracle.com/SOAForHealthcare/entry/soa_suite_healthcare_integration_architecture #soacommunity #soa Andrejus Baranovskis ?Running Pre-built Virtual Machine for SOA Suite and BPM Suite 11g PS5 on Mac OS X Snow Leopard (10.6http://fb.me/vB8nO0Vg OracleBlogsPrinciples of Service-Oriented Architecture by Douwe P. van den Bos http://ow.ly/1kIcOP OTNArchBeatOracle Public Cloud Architecture | @TylerJewell http://ow.ly/bHAcL The SOA Network ?Business Process Management, Service-Oriented Architecture, and Web 2.0: Business Transformation or.http://bit.ly/LBgREL #ITNews #SOA OracleBlogs ?Oracle SOA Foundation Practitioner Certificationhttp://ow.ly/1kGYYg Frank Nimphius ?Learn Advanced ADF. ORACLE Fusion Middleware Summer Camps in Lisbon - July 9th - 13thhttp://bit.ly/KGCl3i SOA CommunityTransform Your Application Integration with Best Practices from Oracle Customershttps://blogs.oracle.com/SOA/entry/transform_your_application_integration_with #soacommunity #soa #bpm Simone GeibWhat you always wanted to know about #oraclesoa diagnostics: Shawn Bailey, Overview of SOA Diagnostics in 11.1.1.6,http://ow.ly/bxK0M Oracle SOA ?Save the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to #oraclesoa http://bit.ly/LsNDGl OTNArchBeat ?New VirtualBox images for Oracle SOA Suite & Oracle BPM Suite 11.1.1.6.0http://ow.ly/bwDAl OracleBlogs ?Process development lifecycle in Oracle BPM 11g http://ow.ly/1ktesY Daniel AmadeiNew post: Oracle BPEL 11g Message Delivery & Recovery.http://amadei.com.br/blog/index.php /oracle-bpel-11g-message-delivery SOA Community ?Sending out the June edition of the #soacommunity newsletter - read it or become a member http://www.oracle.com/goto/emea/soa!#soa #bpm Arun Pareek ?For the past six months Ahmed Aboulnaga and me have been working on Oracle SOA Suite 11g Administrator's Handbook.http://lnkd.in/CAvpUQ SOA CommunitySun shine all day no clouds - solar eclipse is over... #sunshine #cloud http://www.infoq.com/presentations/Swarm-Computing Michel SchildmeijerWatch my blog Oracle Service Bus 11g: listing projects and services with WLST - part 1 http://lnkd.in/B7f3GQ @TITAN_GS @wlscommunity OTNArchBeatBook Review: Oracle Application Integration Architecture (AIA) Foundation Pack 11gR1: Essentials | Rajesh Rahejahttp://ow.ly/bn2cc OTNArchBeat ?Driving from Business Architecture to Business Process Services | @vghariharan http://ow.ly/bn5UB OTNArchBeat ?SOA Analysis within the Department of Defense Architecture Framework (DoDAF) 2.0 - Part II | Dawit Lessanu http://ow.ly/bn6sX Simone Geib ?Contact me directly for ideas how to improvehttp://bit.ly/advancedsoasuite and additional posts, presentations, white papers, ... #soasuite Simone Geib ?#soasuite advanced OTN page has become too cluttered. Broke it into separate pages to start with. http://bit.ly/advancedsoasuite OracleBlogs ?June Webcast: SOA Gateway Implementation and Troubleshooting (2 sessions) http://ow.ly/1kbRFA ServiceTechSymposium ?New session just posted to calendar: "NoSQL for Data Services, Data Virtualization & Big Data" by Guido Schmutz, Trivadis AG ://ow.ly/bjjOeDebra Lilley ?looks good - real proof people are using the apps ! RT @fteter: Very cool Fusion Applications Help site: http://bit.ly/L3nvOR #FusionApps demed ?rapid proliferation of cloud computing will drive convergence of SOA and cloud paradigms" http://ovum.com/2012/05/18/soa-paves-the-way-for-cloud/ SOA CommunityMiddleware Oracle Excellence Awards 2012-HAPPY NEW YEAR! https://soacommunity.wordpress.com/2012/05/31/middleware-oracle-excellence-awards-2012happy-new-year/ #soacommunity #opn #opnaward #specialization #oracle SOA CommunityHappy New Year #soacommunity thanks for the business! Time for a drink http://pic.twitter.com/zkK08KWB OTNArchBeat ?Who should ‘own’ the Enterprise Architecture? | Michael Glas http://bit.ly/K0ge0Q SOA Communitytop Tweets SOA Partner Community – May 2012 http://wp.me/p10C8u-pP ServiceTechSymposiumNew session just posted to Symposium calendar: "Elastic SOA in the Cloud" by Steve Millidge, C2B2 Consulting http://www.servicetechsymposium.com/agenda2012.php #elastic_soa_in_the_cloud orclateamsoa ?A-Team Blog #ateam: How to Set JVM Parameters in Oracle SOA 11Ghttp://ow.ly/1k2cnl ServiceTechSymposium ?New session just posted to Symposium calendar: "SOA Governance at EDP: A Global Energy Company" by Manuel Rosa, Linkhttp://www.servicetechsymposium.com/agenda2012.php#soa_governance_at_edp SOA Community ?VirtualBox image SOA Suite & BPM Suite 11.1.1.6.0–Your feedback?http://wp.me/p10C8u-qh Oracle MiddlewareSave the date: Jun 21 10AM, SOA & BPM Customer Insight Series. Hear how Choice Hotels went from legacy to#oraclesoa http://bit.ly/LU1y5N OTNArchBeat ?Goodbye, Silos. Hello SOA. | @stephanieoverbyhttp://pub.vitrue.com/NJJO SOA CommunityBPM Standard Edition - to start your BPM project http://wp.me/p10C8u-qj Please feel free to send us your news! And add your blog to our SOA blog wiki. Back to top OVERVIEW OF SOA DIAGNOSTICS IN 11.1.1.6 What tools are available for diagnosing SOA Suite issues? There are a variety of tools available to help you and Support diagnose SOA Suite issues in 11g but it can be confusing as to which tool is appropriate for a particular situation and what their relationships are. This blog post will introduce the various tools and attempt to clarify what each is for and how they are related. Let's first list the tools we'll be addressing: RDA: Remote Diagnostic Agent DFW: Diagnostic Framework Selective Tracing DMS: Dynamic Monitoring Service ODL: Oracle Diagnostic Logging ADR: Automatic Diagnostics Repository ADRCI: Automatic Diagnostics Repository Command Interpreter WLDF: WebLogic Diagnostic Framework This overview is not mean to be a comprehensive guide on using all of these tools, however, extensive reference materials are included that will provide many more details on their execution. Another point to note is that all of these tools are applicable for Fusion Middleware as a whole but specific products may or may not have implemented features to leverage them. A couple of the tools have a WebLogic Scripting Tool or 'WLST' interface. WLST is a command interface for executing pre-built functions and custom scripts against a domain. A detailed WLST tutorial is beyond the scope of this post but you can find general information here. There are more specific resources in the below sections.In this post when we refer to 'Enterprise Manager' or 'EM' we are referring to Enterprise Manager Fusion Middleware Control. read the full blog post here. Read more on Oracle and post your comment here. Back to top BUSINESS DRIVEN DEVELOPMENT (BDD) DEMO NOW AVAILABLE! For access to the Oracle demo systems please visit OPN and talk to your Partner Expert DSS is pleased to announce the availability of the demo “Business Driven Development“. This innovative demonstration uses a case-study approach to show business users how they can easily streamline their Business Processes - delivering greater efficiency, agility, visibility and collaboration with Oracle BPM and WebCenter. The BDD demonstration uses a case study-based approach to highlight a business problem at a fictional company, Avitek Corporation, and uses Oracle BPM and Oracle WebCenter to solve the business problem. This holistic approach has specifically been used to appeal to a non-technical business analyst user. This demo is NOT focused on product features, but aims to guide users through a complete BPM lifecycle. The scenario is based on improving a simple order process (scenario details are in the demo script). Avitek Corporation is sufferinng from a manual email-driven ordering process. Sales reps don’t know where the customer orders are stuck (no visibility) and finance users are unable to manually approve every order (no automation). There are several areas where this process can be improved with Business Process Management technology. This demo shows how improving following areas will ignificantly help resolve the business problems Avitek Corporation is facing. Areas for improvement include: Utilizing BPM for process management, rather than an unregulated, email-based process. Utilizing automated services, rather than requiring a human to key into a system. For example, Finance checking the customer’s credit rating is something that could be automated. Centralizing business rules that can be integrated into a business process, rather than requiring a human to process them. For example, Finance must determine when orders can be automatically approved. Provide insight and visibility into the process. For example, Sales Rep needs to know the status of their customer’s orders. The BDD Demo uses the following products. Oracle BPM Suite 11g PS4FP Oracle WebCenter 11g PS4FP (for Process Spaces) Oracle Business Activity Monitoring 11g Oracle Database 11g Back to top SOA LIFECYCLE MANAGEMENT For access to the Oracle demo systems please visit OPN and talk to your Partner Expert We are pleased to announce the availability of the SOA Management demo that showcases some of the key provisioning and lifecycle management capabilities of SOA Management Pack Enterprise Edition (EE). This demo specifically focuses on some of the lifecycle management solutions for Oracle SOA Suite and Oracle Service Bus (OSB). Demo Highlights The demo showcases the following capabilities. Provisioning of SOA Composites Provisioning of OSB Projects Provision SOA and OSB artifacts in a future maintenance window Back to top ORACLE FUSION APPLICATIONS DESIGN PATTERNS The Oracle Fusion Applications user experience design patterns are published! These new, reusable usability solutions and best-practices, which will join the Oracle dashboard patterns and guidelines that are already available online, are used by Oracle to artfully bring to life a new standard in the user experience, or UX, of enterprise applications. Now, the Oracle applications development community can benefit from the science behind the Oracle Fusion Applications user experience, too. These Oracle Fusion Applications UX Design Patterns, or blueprints, enable Oracle applications developers and system implementers everywhere to leverage professional usability insight when: tailoring an Oracle Fusion application, creating coexistence solutions that existing users will be delighted with, thus enabling graceful user transitions to Oracle Fusion Applications down the road, or designing exciting, new, highly usable applications in the cloud or on-premise. Based on the Oracle Application Development Framework (ADF) components, the Oracle Fusion Applications patterns and guidelines are proven with real users and in the Applications UX usability labs, so you can get right to work coding productivity-enhancing designs that provide an advantage for your entire business. What’s the best way to get started? We’ve made that easy, too. The Design Filter Tool (DeFT) selects the best pattern for your user type and task. Simply adapt your selection for your own task flow and content, and you’re on your way to a really great applications user experience. More Oracle applications design patterns and training are coming your way in the future. To provide feedback on the sets that are currently available, let me know in the comments! Read more on Fusionapps and post your comment here. Back to top UPDATED ORACLE MATERIAL Integrated SOA Gateway Documentation - Implementation Guide | Developer’s Guide Webcast Series: Oracle’s SOA and Oracle Business Process Management Solutions (Choice Hotels, Eaton, Farmers Insurance) BAM design pointers By Kavitha Srinivasan Seeking Oracle Fusion Middleware Go Live StoriesOracle Fusion Middleware product management is looking for recent go live stories to share with the Oracle sales team, sales consulting, product management and other internal groups. Customer contact details may remain anonymous. Your successful implementation will be featured in a quarterly report. The chance to present on an internal webcast is also available. Contact Maria Forney ([email protected]) if you have a noteworthy implementation success story. This is a good opportunity for partners interested in showcasing Oracle Fusion Middleware implementations, and gaining more exposure within Oracle. Performance tuning resources. All in one: docs, blogs, WPs, ppts: http://bit.ly/soa_resources Back to top HAVE YOU MISSED OUR LAST SOA PARTNER COMMUNITY WEBCASTS? UPK Webcast Business Driven Application Management & BPM11g & Application Grid & GoldenGate & Fusion Middleware Pricing & OC4J to WebLogic & Next Generation SOA & Fusion Middleware in Utility & Fusion Middleware in Communications & Fusion Middleware in Public Services & Fusion Middleware in Financial Services Please check your local OPN trainings calendar for additional training dates and locations. Back to top SOA PARTNER COMMUNITY CALENDAR On-Demand Trainings Event Name Language Type SOA Virtual Developers Day English Tech In-Class Trainings Date Event name Location / Country Contact person Type 09-13.07.2012 BPM Suite 11g advanced training by David Read Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 ADF 11g advanced training by Grant Ronald and Frank Nimphius Lisbon, Portugal Jürgen Kress Tech 09-13.07.2012 WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Lisbon, Portugal Jürgen Kress Tech 10.07.2012 Fusion Middleware Virtual Developer Day Online OTN Tech 10- 12.07.2012 WebLogic 12c training by Cosmin Tudor Lisbon, Portugal Jürgen Kress Tech 16-18.07.2012 SOA Suite 11g advanced training by Niall Commiskey Munich, Germany Jürgen Kress Tech 16-18.07.2012 ADF for BPM Suite 11g advanced training by David Read Munich, Germany Jürgen Kress Tech 16-18.07.2012 WebCenter Sites 11g advanced training by Product Management Munich, Germany Jürgen Kress Tech 17-20.07.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 23-26.07.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 29-31.08.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 02-05.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.10.2012 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 28-30.11.2012 Oracle AIA 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 11-14.12.2012 Oracle BPM 11g Implementation Bootcamp Live Virtual Class Oracle University Tech 20-22.2.2013 Oracle AIA 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 14-17.1.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech 15-18.3.2013 Oracle BPM 11g Implementation Bootcamp Utrecht, Netherlands Oracle University Tech Please check your local OPN Training Calendar for additional training and locations here. Back to top SOASCHOOL.COM - SOA CERTIFIED PROFESSIONAL(SOACP) PROGRAM The SOASchool.com - SOA Certified Professional (SOACP) program is dedicated to excellence in the field of SOA and service-oriented computing. Through a series of seasoned course modules and exams, IT professionals have the opportunity to obtain a number of different certifications to recognize their accomplishment of gaining "project ready" SOA proficiency. This comprehensive and strictly vendor-neutral program was developed in cooperation with best-selling SOA author Thomas Erl and several major SOA organizations and academic institutions. Through the involvement of the SOA Education Committee, course contents and certification requirements are constantly reviewed and revised to stay current with developments in the service-oriented computing industry. The program is currently comprised of 12 course modules and 5 certifications and is expanding to 18 course modules and 8 certifications throughout 2009. For more information, visit www.soaschool.com and www.soacp.com. Blog Twitter LinkedIn Mix Forum Wiki Back to top YOUR CONTENT ON THE NEWSLETTER AND ON THE SOA COMMUNITY PORTAL Publishing Your StoriesWe would like to invite our partners to publish information in the newsletter or on our SOA Community portal. Especially we are looking for your real life experience with our SOA technology. Please send your documents to Jürgen Kress. We look forward to getting your suggestions! Back to top SOA DISCUSSION FORUM BECOMES INTERACTIVE AT THE SOA COMMUNITY! Do you want to chat to experts, including partners and Oracle SOA Product Development? Do you want to get the latest information about our SOA solutions and events?Attend our private online SOA Discussion Forum at OTN. Please send your OTN forums user name to Brigitte Felisaz. You must be a registered user to access the SOA Discussion Forum. Back to top INVITE YOUR COLLEAGUES TO JOIN THE SOA COMMUNITY Please feel free to invite your colleagues to join the SOA Community and to participate in the SOA Assessment tests. For registration please login the Oracle PartnerNetwork and go to: www.oracle.com/goto/emea/soa For any questions on the above or concerning SOA and Oracle in general please contact the Oracle EMEA Alliances & Channels SOA Team. Best regardsOracle EMEA SOA TeamJürgen Kress Jürgen KressSOA Partner Adoption EMEATel. +49 89 1430 1479E-Mail: [email protected]

Read the article

SQL Server and Hyper-V Dynamic Memory - Part 1

- by SQLOS Team

SQL and Dynamic Memory Blog Post Series Hyper-V Dynamic Memory is a new feature in Windows Server 2008 R2 SP1 that allows the memory assigned to guest virtual machines to vary according to demand. Using this feature with SQL Server is supported, but how well does it work in an environment where available memory can vary dynamically, especially since SQL Server likes memory, and is not very eager to let go of it? The next three posts will look at this question in detail. In Part 1 Serdar Sutay, a program manager in the Windows Hyper-V team, introduces Dynamic Memory with an overview of the basic architecture, configuration and monitoring concepts. In subsequent parts we will look at SQL Server memory handling, and develop some guidelines on using SQL Server with Dynamic Memory. Part 1: Dynamic Memory Introduction In virtualized environments memory is often the bottleneck for reaching higher VM densities. In Windows Server 2008 R2 SP1 Hyper-V introduced a new feature “Dynamic Memory” to improve VM densities on Hyper-V hosts. Dynamic Memory increases the memory utilization in virtualized environments by enabling VM memory to be changed dynamically when the VM is running. This brings up the question of how to utilize this feature with SQL Server VMs as SQL Server performance is very sensitive to the memory being used. In the next three posts we’ll discuss the internals of Dynamic Memory, SQL Server Memory Management and how to use Dynamic Memory with SQL Server VMs. Memory Utilization Efficiency in Virtualized Environments The primary reason memory is usually the bottleneck for higher VM densities is that users tend to be generous when assigning memory to their VMs. Here are some memory sizing practices we’ve heard from customers: · I assign 4 GB of memory to my VMs. I don’t know if all of it is being used by the applications but no one complains. · I take the minimum system requirements and add 50% more. · I go with the recommendations provided by my software vendor. In reality correctly sizing a virtual machine requires significant effort to monitor the memory usage of the applications. Since this is not done in most environments, VMs are usually over-provisioned in terms of memory. In other words, a SQL Server VM that is assigned 4 GB of memory may not need to use 4 GB. How does Dynamic Memory help? Dynamic Memory improves the memory utilization by removing the requirement to determine the memory need for an application. Hyper-V determines the memory needed by applications in the VM by evaluating the memory usage information in the guest with Dynamic Memory. VMs can start with a small amount of memory and they can be assigned more memory dynamically based on the workload of applications running inside. Overview of Dynamic Memory Concepts · Startup Memory: Startup Memory is the starting amount of memory when Dynamic Memory is enabled for a VM. Dynamic Memory will make sure that this amount of memory is always assigned to the VMs by default. · Maximum Memory: Maximum Memory specifies the maximum amount of memory that a VM can grow to with Dynamic Memory. · Memory Demand: Memory Demand is the amount determined by Dynamic Memory as the memory needed by the applications in the VM. In Windows Server 2008 R2 SP1, this is equal to the total amount of committed memory of the VM. · Memory Buffer: Memory Buffer is the amount of memory assigned to the VMs in addition to their memory demand to satisfy immediate memory requirements and file cache needs. Once Dynamic Memory is enabled for a VM, it will start with the “Startup Memory”. After the boot process Dynamic Memory will determine the “Memory Demand” of the VM. Based on this memory demand it will determine the amount of “Memory Buffer” that needs to be assigned to the VM. Dynamic Memory will assign the total of “Memory Demand” and “Memory Buffer” to the VM as long as this value is less than “Maximum Memory” and as long as physical memory is available on the host. What happens when there is not enough physical memory available on the host? Once there is not enough physical memory on the host to satisfy VM needs, Dynamic Memory will assign less than needed amount of memory to the VMs based on their importance. A concept known as “Memory Weight” is used to determine how much VMs should be penalized based on their needed amount of memory. “Memory Weight” is a configuration setting on the VM. It can be configured to be higher for the VMs with high performance requirements. Under high memory pressure on the host, the “Memory Weight” of the VMs are evaluated in a relative manner and the VMs with lower relative “Memory Weight” will be penalized more than the ones with higher “Memory Weight”. Dynamic Memory Configuration Based on these concepts “Startup Memory”, “Maximum Memory”, “Memory Buffer” and “Memory Weight” can be configured as shown below in Windows Server 2008 R2 SP1 Hyper-V Manager. Memory Demand is automatically calculated by Dynamic Memory once VMs start running. Dynamic Memory Monitoring In Windows Server 2008 R2 SP1, Hyper-V Manager displays the memory status of VMs in the following three columns: · Assigned Memory represents the current physical memory assigned to the VM. In regular conditions this will be equal to the sum of “Memory Demand” and “Memory Buffer” assigned to the VM. When there is not enough memory on the host, this value can go below the Memory Demand determined for the VM. · Memory Demand displays the current “Memory Demand” determined for the VM. · Memory Status displays the current memory status of the VM. This column can represent three values for a VM: o OK: In this condition the VM is assigned the total of Memory Demand and Memory Buffer it needs. o Low: In this condition the VM is assigned all the Memory Demand and a certain percentage of the Memory Buffer it needs. o Warning: In this condition the VM is assigned a lower memory than its Memory Demand. When VMs are running in this condition, it’s likely that they will exhibit performance problems due to internal paging happening in the VM. So far so good! But how does it work with SQL Server? SQL Server is aggressive in terms of memory usage for good reasons. This raises the question: How do SQL Server and Dynamic Memory work together? To understand the full story, we’ll first need to understand how SQL Server Memory Management works. This will be covered in our second post in “SQL and Dynamic Memory” series. Meanwhile if you want to dive deeper into Dynamic Memory you can check the below posts from the Windows Virtualization Team Blog: http://blogs.technet.com/virtualization/archive/2010/03/18/dynamic-memory-coming-to-hyper-v.aspx http://blogs.technet.com/virtualization/archive/2010/03/25/dynamic-memory-coming-to-hyper-v-part-2.aspx http://blogs.technet.com/virtualization/archive/2010/04/07/dynamic-memory-coming-to-hyper-v-part-3.aspx http://blogs.technet.com/b/virtualization/archive/2010/04/21/dynamic-memory-coming-to-hyper-v-part-4.aspx http://blogs.technet.com/b/virtualization/archive/2010/05/20/dynamic-memory-coming-to-hyper-v-part-5.aspx http://blogs.technet.com/b/virtualization/archive/2010/07/12/dynamic-memory-coming-to-hyper-v-part-6.aspx - Serdar Sutay Originally posted at http://blogs.msdn.com/b/sqlosteam/

Read the article

Top tweets SOA Partner Community – October 2013

- by JuergenKress

Send your tweets @soacommunity #soacommunity and follow us at http://twitter.com/soacommunity Ronald Luttikhuizen ?My latest upload: SOA Made Simple | Introduction to SOA on @slideshare http://www.slideshare.net/rluttikhuizen/soa-made-simple-introduction-to-soa … via @SlideShare OTNArchBeat ?ArchBeat Link-o-Rama for October 4, 2013 #cloud #linux #oaam #soa http://pub.vitrue.com/y4SK Lucas Jellema ?My blog article shows news on the new SOA Suite 12c release - as it was publicly available during #oow13 see: http://technology.amis.nl/2013/09/27/oow13-soa-suite-12c/ … Yogesh Sontakke ?Introducing OER's new Express Workflows - Simplified Lifecycle Management. Blog post: http://bit.ly/16JKHCf @soacommunity #soagovernance SrinivasPadmanabhuni ?"@OTNArchBeat: SOA and User Interfaces - by @soacommunity @HajoNormann @gschmutz @t_winterberg et al #industrialsoa http://pub.vitrue.com/KmOp " SOA Community ?SOA and User-Interfaces http://servicetechmag.com/I76/0913-2 article published part of #industrialSOA at Service Technology Magazine #soacommunity Estafet Limited ?@Estafet win @UKOUG Middleware Partner of the Year 2013 Yogesh Sontakke ?RT @VikasAatOracle: #Oracle #B2B - written by experts #soa #soacommunity #oraclesoa - time to get a copy ! @SOAScott Danilo Schmiedel ?Thanks a lot to Juergen @soacommunity for the super interesting and well-organized Partner Advisory Council yesterday! Such a Great Value! OTNArchBeat ?Case management supporting re-landscaping application portfolios | @leonsmiers http://pub.vitrue.com/MC5j Samantha Searle ?Apply for the #GartnerBPM 2014 Excellence Awards - find out how via this link http://ow.ly/ptaNQ #Gartner #bpm #process #entarch #cio OTNArchBeat ?SOA and User Interfaces - by @soacommunity @hajonormann @gschmutz @t_winterberg et al #industrialsoa http://pub.vitrue.com/KmOp Dain Hansen ?Hybrid #cloud is on the rise, but is the IT department's culture standing in the way? http://add.vc/eJN #CloudIntegration #OracleSOA OTNArchBeat #SOASuite 11g ps6 - Download your log files directly from the Enterprise Manager | @whitehorsenl http://pub.vitrue.com/KrJ2 Whitehorses ?Whiteblog: SOA Suite 11g ps6 - Download your log files directly from the Enterprise Manager (http://goo.gl/2Gqiax ) Rajesh Raheja ?Cloud integration session recap #oow13 http://blog.raastech.com/2013/09/recap-of-real-world-cloud-integration.html?m=1 … Vikas Anand ?@Ahmed_Aboulnaga thanks for the excellent summary and kind words. #oow13 #cloud #oraclesoa http://blog.raastech.com/2013/09/recap-of-real-world-cloud-integration.html?m=1 … Luis Augusto Weir ?REST is also SOA. Check it out http://www.soa4u.co.uk/2013/09/restful-is-also-soa.html?m=1 … #soacommunity Graham ?“@OracleBPM & @soacommunity: 5 Ways to Modernize Applications with BPM #AppAdvantage" #oracleday http://bit.ly/15yC6e3 SOA Community ?#ACED director asked me for BPM references in FSI - ever visited my #SOACommunity workspace? https://beehiveonline.oracle.com/teamcollab/overview/SOA_Community_Workspace … #soacommunity #bpm OracleBlogs ?SOA Community Newsletter September 2013 http://ow.ly/2Aj6oK OTNArchBeat ?OOW13: First glimpses of the new #SOASuite12c | @LucasJellema http://pub.vitrue.com/2YgX sbernhardt ?Just published new blog entry on OOW 2013 wrap up. http://thecattlecrew.wordpress.com/2013/09/30/oracle-open-world-2013-wrap-up/ … #oow13 @OC_WIRE @soacommunity Emiel Paasschens ?Home with family after an overwhelming #OOW week in San Francisco with lot of info & meetings. Special thanx to @OracleBelux & @soacommunity Robert van Mölken ?Had a awesome week at #OOW13 in SF. Highlights were the @soacommunity Wine tour, @OracleBelux meet-ups and @OracleSOA CAB. Thanks to all :) SOA Community ?The place Oracle Fusion middleware comes from - Oracle 200 - TKs office - next Oracle 100 - SOA & BPM #soacommunity pic.twitter.com/qibFOQVbRo Oracle BPM ?5 Ways to Modernize Applications with BPM #AppAdvantage http://pub.vitrue.com/l2dn Simon Haslam ?Ha ha - how did we miss that! RT @lucasjellema: Post conference announcement of a new middleware appliance? #oow13 pic.twitter.com/3NvcjPfjXb OTNArchBeat ?The OTNArchBeat Daily is out! http://paper.li/OTNArchBeat/1329828521 … ? Top stories today via @lucasjellema @myfear @TylerJewell Packt Publishing ?Get 50% off ALL our DRM-free eBooks - this weekend only! Go to http://www.packtpub.com/ and use code BIG50, as often as you like! #BIG50 OracleBlogs ?Global Perspective: ACE Director from EMEA Weighs in on AppAdvantage http://ow.ly/2Afek2 orclateamsoa ?#orclateamsoa Blog: BPM Auditing Demystified - I've heard from a couple of customers recently asking about BPM aud... http://ow.ly/2AfbAn AMIS, Oracle & Java ?Cool #soasuite 12c feature managed file transfer - visit Dave Barry at demo point sr212 #oow #soacommunity pic.twitter.com/gb4HLbUarR SOA Community ?Let us know what was best at #OOW @soacommunity save trip home - thanks for coming to #SF ;-) see you at #OOW2014 pic.twitter.com/xbWXjRapqh Lonneke Dikmans ?Nice @dschmied is talking about the different steps in his project. He starts with explaining the user interface design #oow13 #ux #acm Lonneke Dikmans ?Saving the best for the end: managing knowledge worker processes by @dschmied and Prasen.#oow13 #acm cool stuff: adaptive case management Luis Augusto Weir ?SOA Governance is more than just OER. Requires people, processes and tools. Check it out #SOA #soacommunity http://youtu.be/Ohn06smVKVw Lonneke Dikmans ?“@OracleSOA: #oow Join us for:Enterprise SOA Infrastructure Best Practices Thu 9/26 2:00 PM - 3:00 PM Moscone West - 2020 SOA Community ?Business Process Management (BPM) 11g PS6 Awareness Course http://wp.me/p10C8u-1as Ajay Khanna ?Detect, Analyze, Act - Fast! http://wp.me/p10C8u-1ao via @soacommunity #OracleBPM Simone Geib ?It took a while, but I finally reached 500 followers. Thanks everybody and especially @soacommunity :) SOA Community ?Functional Testing Business Processes In Oracle BPM Suite 11g by Arun Pareek http://wp.me/p10C8u-1aq SOA Community Distribute the September edition of the SOA Community newsletter READ it! Didn't receive it register http://www.oracle.com/goto/emea/soa #soacommunity SOA Community ?Detect, Analyze, Act - Fast! by Ajay Khanna http://wp.me/p10C8u-1ao Robert van Mölken ?Finalised my #OOW presentation #CON8736 and live demo on wednesday 25th at 11:45am. Also giving a short version at the SOA CAB on thursday. Rajesh Raheja ?"The AppAdvantage of Oracle Cloud & On-premises Integration" http://bit.ly/14RYHmZ SOA Community ?Additional new content SOA & BPM Partner Community http://wp.me/p10C8u-1aw Dain Hansen ?Right now #oow13 SOA, BPM - Customer Advisory Boards. 'No tweeting' says @SOASimone. Instagram of funny cats still ok. leonsmiers ?Case Management with Oracle BPM Suite our presentation on #oow13 http://www.slideshare.net/leonsmiers/oracle-open-world-2013-case-management-smiers-kitson … #capgemini @nkitson72 Mark Simpson ?Flextronics reduced cost of processing an invoice to <$1 from $7 due to BPM @OracleBPM #oow13 saving millions. Way less than industry avg. Holger Mueller ?#Siemens Shared Services CIO says that #Fusion #Middleware made the difference for #Oracle over #Workday. #Integration matters. #OOW13 oracleopenworld ?Miss any #oow13 keynotes, or simply want to rewatch? Check out the live streaming site for keynotes on demand: http://pub.vitrue.com/RG4D SOA Community ?Analyze your m2m data and act on it! Big data Pattern matching, fast data & soa #soacommunity #oow pic.twitter.com/48Q1z4ckh7 SOA Community ?Top tweets SOA Partner Community – September 2013 http://wp.me/p10C8u-1cR Simone Geib ?#oraclesoa hands on lab at #oow13 pic.twitter.com/IJJrqXIMiu Danilo Schmiedel #oow13 CON8436: Managing Knowledge Worker Processes. Come & get a free Adaptive Case Management poster @soacommunity pic.twitter.com/FRc2CSyLwb John Sim ?Great job again Jurgen @soacommunity helping bring Ace Community together! Danilo Schmiedel ?Excellent #OracleBPM Adaptive Case Management intro by @heidibuelowBPM and Prasen at the #oow13 demo ground.Last chance today @soacommunity SOA Community ?Thanks to all our #bpm #soa and #weblogic partners for the great middleware business #oow #soacommunity pic.twitter.com/dBwZ8DMHfH Whitehorses ?Thanks @soacommunity for the party tonight. Great to meet product management & see all the talented EMEA middleware specialists. #oow13 Danilo Schmiedel ?Great tool demo from Link Consulting about managing your SOA with OER #oow13 @soacommunity Torsten Winterberg ?“@soacommunity: thanks to @dschmied and @OC_WIRE for making it happen to have our case management poster as printed version hier at #oow13 Ronald Luttikhuizen ?These were the architects involved in the diagram excitement :) just after State of SOA podcast with @OTNArchBeat pic.twitter.com/5B8jIrVTA9 SOA Community ?Tanks to AVIO for the excellent #bpmn poster and the great bpm business - visit then at #OOW & get the poster pic.twitter.com/ebTg9pFY1C Dain Hansen ?Kurian introducing Oracle Platform-as-a-Service developments. #oow13 #OracleCloud pic.twitter.com/evJLTU53rx Bruce Tierney ?API Management "multi-level pie chart" at #oow13 by Oracle's Tim Hall pic.twitter.com/q12OIRdaue Dain Hansen ?This is not your Daddy's BAM @soacommunity: Is this BAM? Very cool in #soasuite 12c get a demo at sr225 pic.twitter.com/EvwqXW9U5j SOA Community ?Is this BAM? Very cool in #soasuite 12c get a demo at sr225 pic.twitter.com/LybHxyF362 SOA Community ?SOA governance by @Yogesh_Sontakke at demo point sr214 many good new features - key for soa projects #oow #soa pic.twitter.com/DFK0ummsK1 SOA Community ?Cool #soasuite 12c feature managed file transfer - visit Dave Barry at demo point sr212 #oow #soacommunity pic.twitter.com/GDKcqDGhCF SOA Community ?Adaptive Case Management demo point at #OOW visit @heidibuelowBPM get a demo and cmmn notation poster #soacommunity pic.twitter.com/T7yEyI7tdn Lonneke Dikmans ?In case you missed it: http://blog.vennster.nl/2013/09/case-management-part-1.html?spref=tw … Lucas Jellema ?SOA Suite news: Cloud Adapters RightNow and SalesForce plus SDK to develop custom cloud adapters (CY13); REST/JSON support in SB/SCA (12c) Oracle SOA ?Cloud Integration and AppAdvantage: Transform your Enterprise #soa #oow13 http://pub.vitrue.com/UfPB Dain Hansen ?Cloud Integration and AppAdvantage: Transform your Enterprise #soa #oow13 http://pub.vitrue.com/4QWA Hajo Normann ?#BigData, eventing & real time #analytics suggest timely next actions in #oracleBPM & #oracleACM; #oow13 #FastData pic.twitter.com/aFVGrTXPqu Mark Simpson ?OEP CQL engine now used in BAM12c for event stream summary computation with temporal and pattern match features to feed dashboards. #oow13 Mark Simpson ?BAM12c virtually a new product. Analytics that senses ahead of time and also compares to historical trends to guide process or case #oow13 Andrejus Baranovskis ?Enabling UI Shell 12c/11g Multitasking Behavior http://fb.me/18l9vxQfA Amit Zavery ?Oracle Fusion Middleware Empowers Business Users, EVP Thomas Kurian's session summary http://onforb.es/18Ta1jf #oow13 #oraclemiddle #oracle Vikas Anand ?#oow13 #oracleopenworld BPM on display at Middleware keynote by Thomas Kurian pic.twitter.com/PMm719S0Ui SOA Community ?BPM composer - business user empowerment #oow #soacommunity #bpmsuite pic.twitter.com/0Qgl6oVh0h SOA Community ?Model your process in BPMN - make is executable and analyze & improve them #oow #soacommunity pic.twitter.com/jkLlObDdoi Bruce Tierney ?@demed and Thomas Kurian talk mobile and cloud at #oow13 pic.twitter.com/bAAeqn5a2V Amit Zavery ?Thomas Kurian showcasing all the new features of Oracle Fusion Middleware #oraclemiddle #oow13 SOA Community ?Demo time cloud adapters in #soasuite at Thomas Kurian keynote. Build and integrate mobile apps in minutes #oow pic.twitter.com/qTnCOJLLwS SOA Community ?Soa suite cloud adapters and mobile apps by @demed at Thomas Kurian keynote #oow #oracle #soacommunity pic.twitter.com/5aMLkNH4Ng Danilo Schmiedel ?First impressions from Oracle Open World 2013 http://wp.me/p2fG8x-77 @soacommunity @OC_WIRE SOA Community ?Good morning SFO let us know if you attend #OOW & #OPN keynote - #soacommunity pic.twitter.com/hzLYGDlRgE Simon Haslam ?Had a very useful @wlscommunity PAC meeting yesterday... & probably the best swag to date! pic.twitter.com/Lqus8ysbp7 Vikas Anand ?Oracle SOA Suite - Team Blog http://bit.ly/18I1Zj7 Rajesh Raheja ?Introducing new Cloud Connectivity Adapters #soa #demopod #oow13. I'll be there Sep 23 & 24 3-6pm to meetup http://bit.ly/18I1Zj7 leonsmiers ?..and again a very successful Oracle SOA/BPM partner council on the eve of #oow13. Thanks Jurgen! @soacommunity pic.twitter.com/aM1LMlb7Yw Vikas Anand ?#oow13 #soa #oep #exalogic Canon Delivers Fast Data with Oracle Event Processing (Oracle SOA Suite) http://bit.ly/1dwPeHb #soacommunity Rolf Scheuch ?The ACM poster is a big success. Great talks and .... I am soon out of posters! #bpmcon #ACM pic.twitter.com/TriaUyXRWK Oracle SOA ?British Telecom Sucess with Oracle B2B #oow #soa #b2b http://pub.vitrue.com/1RWi leonsmiers ?(Oracle) Case Management supporting re-platforming, a pre-read before our presentation at #oow13 http://leonsmiers.blogspot.com/2013/09/case-management-supporting-re.html … #capgemini #yammer SOA & BPM Partner CommunityFor regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: Twitter,SOA,Oracle BPM,Community,OPN,Jürgen Kress

Read the article

SQL Server and Hyper-V Dynamic Memory - Part 1

- by SQLOS Team

SQL and Dynamic Memory Blog Post Series Hyper-V Dynamic Memory is a new feature in Windows Server 2008 R2 SP1 that allows the memory assigned to guest virtual machines to vary according to demand. Using this feature with SQL Server is supported, but how well does it work in an environment where available memory can vary dynamically, especially since SQL Server likes memory, and is not very eager to let go of it? The next three posts will look at this question in detail. In Part 1 Serdar Sutay, a program manager in the Windows Hyper-V team, introduces Dynamic Memory with an overview of the basic architecture, configuration and monitoring concepts. In subsequent parts we will look at SQL Server memory handling, and develop some guidelines on using SQL Server with Dynamic Memory. Part 1: Dynamic Memory Introduction In virtualized environments memory is often the bottleneck for reaching higher VM densities. In Windows Server 2008 R2 SP1 Hyper-V introduced a new feature “Dynamic Memory” to improve VM densities on Hyper-V hosts. Dynamic Memory increases the memory utilization in virtualized environments by enabling VM memory to be changed dynamically when the VM is running. This brings up the question of how to utilize this feature with SQL Server VMs as SQL Server performance is very sensitive to the memory being used. In the next three posts we’ll discuss the internals of Dynamic Memory, SQL Server Memory Management and how to use Dynamic Memory with SQL Server VMs. Memory Utilization Efficiency in Virtualized Environments The primary reason memory is usually the bottleneck for higher VM densities is that users tend to be generous when assigning memory to their VMs. Here are some memory sizing practices we’ve heard from customers: · I assign 4 GB of memory to my VMs. I don’t know if all of it is being used by the applications but no one complains. · I take the minimum system requirements and add 50% more. · I go with the recommendations provided by my software vendor. In reality correctly sizing a virtual machine requires significant effort to monitor the memory usage of the applications. Since this is not done in most environments, VMs are usually over-provisioned in terms of memory. In other words, a SQL Server VM that is assigned 4 GB of memory may not need to use 4 GB. How does Dynamic Memory help? Dynamic Memory improves the memory utilization by removing the requirement to determine the memory need for an application. Hyper-V determines the memory needed by applications in the VM by evaluating the memory usage information in the guest with Dynamic Memory. VMs can start with a small amount of memory and they can be assigned more memory dynamically based on the workload of applications running inside. Overview of Dynamic Memory Concepts · Startup Memory: Startup Memory is the starting amount of memory when Dynamic Memory is enabled for a VM. Dynamic Memory will make sure that this amount of memory is always assigned to the VMs by default. · Maximum Memory: Maximum Memory specifies the maximum amount of memory that a VM can grow to with Dynamic Memory. · Memory Demand: Memory Demand is the amount determined by Dynamic Memory as the memory needed by the applications in the VM. In Windows Server 2008 R2 SP1, this is equal to the total amount of committed memory of the VM. · Memory Buffer: Memory Buffer is the amount of memory assigned to the VMs in addition to their memory demand to satisfy immediate memory requirements and file cache needs. Once Dynamic Memory is enabled for a VM, it will start with the “Startup Memory”. After the boot process Dynamic Memory will determine the “Memory Demand” of the VM. Based on this memory demand it will determine the amount of “Memory Buffer” that needs to be assigned to the VM. Dynamic Memory will assign the total of “Memory Demand” and “Memory Buffer” to the VM as long as this value is less than “Maximum Memory” and as long as physical memory is available on the host. What happens when there is not enough physical memory available on the host? Once there is not enough physical memory on the host to satisfy VM needs, Dynamic Memory will assign less than needed amount of memory to the VMs based on their importance. A concept known as “Memory Weight” is used to determine how much VMs should be penalized based on their needed amount of memory. “Memory Weight” is a configuration setting on the VM. It can be configured to be higher for the VMs with high performance requirements. Under high memory pressure on the host, the “Memory Weight” of the VMs are evaluated in a relative manner and the VMs with lower relative “Memory Weight” will be penalized more than the ones with higher “Memory Weight”. Dynamic Memory Configuration Based on these concepts “Startup Memory”, “Maximum Memory”, “Memory Buffer” and “Memory Weight” can be configured as shown below in Windows Server 2008 R2 SP1 Hyper-V Manager. Memory Demand is automatically calculated by Dynamic Memory once VMs start running. Dynamic Memory Monitoring In Windows Server 2008 R2 SP1, Hyper-V Manager displays the memory status of VMs in the following three columns: · Assigned Memory represents the current physical memory assigned to the VM. In regular conditions this will be equal to the sum of “Memory Demand” and “Memory Buffer” assigned to the VM. When there is not enough memory on the host, this value can go below the Memory Demand determined for the VM. · Memory Demand displays the current “Memory Demand” determined for the VM. · Memory Status displays the current memory status of the VM. This column can represent three values for a VM: o OK: In this condition the VM is assigned the total of Memory Demand and Memory Buffer it needs. o Low: In this condition the VM is assigned all the Memory Demand and a certain percentage of the Memory Buffer it needs. o Warning: In this condition the VM is assigned a lower memory than its Memory Demand. When VMs are running in this condition, it’s likely that they will exhibit performance problems due to internal paging happening in the VM. So far so good! But how does it work with SQL Server? SQL Server is aggressive in terms of memory usage for good reasons. This raises the question: How do SQL Server and Dynamic Memory work together? To understand the full story, we’ll first need to understand how SQL Server Memory Management works. This will be covered in our second post in “SQL and Dynamic Memory” series. Meanwhile if you want to dive deeper into Dynamic Memory you can check the below posts from the Windows Virtualization Team Blog: http://blogs.technet.com/virtualization/archive/2010/03/18/dynamic-memory-coming-to-hyper-v.aspx http://blogs.technet.com/virtualization/archive/2010/03/25/dynamic-memory-coming-to-hyper-v-part-2.aspx http://blogs.technet.com/virtualization/archive/2010/04/07/dynamic-memory-coming-to-hyper-v-part-3.aspx http://blogs.technet.com/b/virtualization/archive/2010/04/21/dynamic-memory-coming-to-hyper-v-part-4.aspx http://blogs.technet.com/b/virtualization/archive/2010/05/20/dynamic-memory-coming-to-hyper-v-part-5.aspx http://blogs.technet.com/b/virtualization/archive/2010/07/12/dynamic-memory-coming-to-hyper-v-part-6.aspx - Serdar Sutay Originally posted at http://blogs.msdn.com/b/sqlosteam/

Read the article

SQLAuthority Book Review – DBA Survivor: Become a Rock Star DBA

- by pinaldave

DBA Survivor: Become a Rock Star DBA – Thomas LaRock Link to Amazon Link to Flipkart First of all, I thank all my readers when I wrote that I could not get this book in any local book stores, because they offered me to send a copy of this good book. A very special mention goes to Sripada and Jayesh for they gave so much effort in finding my home address and sending me the hard copy. Before, I did not have the copy of the book, but now I have two of it already! It surprises me how my readers were able to find my home address, which I have not publicly shared. Quick Review: This is indeed a one easy-to-read and fun book. We all work day and night with technology yet we should not forget to show our love and care for our family at home. For our souls that starve for peace and guidance, this one book is the “it” book for all the technology enthusiasts. Though this book was specifically written for DBAs, the reach is not limited to DBAs only because the lessons incorporated in it actually applies to all. This is one of the most motivating technical books I have read. Detailed Review: Let us go over a few questions first: Who wants to be as famous as rockstars in the field of Database Administration? How can one learn what it takes to become a top notch software developer? If you are a beginner in your field, how will you go to next level? Your boss may be very kind or like Dilbert’s Boss, what will you do? How do you keep growing when Eco-system around you does not support you? You are almost at top but there is someone else at the TOP, what do you do and how do you avoid office politics? As a database developer what should be your basic responsibility? and many more… I was able to completely read book in one sitting and I loved it. Before I continue with my opinion, I want to echo the opinion of Kevin Kline who has written the Forward of the book. He has truly suggested that “You hold in your hands a collection of insights and wisdom on the topic of database administration gained through many years of hard-won experience, long nights of study, and direct mentorship under some of the industry’s most talented database professionals and information technology (IT) experts.” Today, IT field is getting bigger and better, while talking about terabytes of the database becomes “more” normal every single day. The gods and demigods of database professionals are taking care of these large scale databases and are carefully maintaining them. In this world, there are only a few beginnings on the first step. There are many experts in different technology fields who are asked to address the issues with databases. There is YOU and ME, who is just new to this work. So we ask ourselves WHERE to begin and HOW to begin. We adore and follow the religion of our rockstars, but oftentimes we really have no idea about their background and their struggles. Every rockstar has his success story which needs to be digested before learning his tricks and tips. This book starts with the same note and teaches the two most important lessons for anybody who wants to be a DBA Rockstar – to focus on their single goal of learning and to excel the technology. The story starts with three simple guidelines – Get Prepared, Get Trained, Get Certified. Once a person learns the skills, and then, it would be about time that he needs to enrich or to improve those skills you have learned. I am sure that the right opportunity will come finding themselves and they will not have to go run behind it. However, the real challenge for any person is the first day or first week. A new employee, no matter how much experienced he is, sometimes has no clue about what should one do at new job. Chapter 2 and chapter 3 precisely talk about what one should do as soon as the new job begins. It is also written with keeping the fact in focus that each job can be very much different but there are few infrastructure setups and programming concepts are the same. Learning basics of database was really interesting. I like to focus on the roots of any technology. It is important to understand the structure of the database before suggesting what indexes needs to be created, the same way this book covers the most essential knowledge one must learn by most database developers. I think the title of the fourth chapter is my favorite sentence in this book. I can see that I will be saying this again and again in the future – “A Development Server Is a Production Server to a Developer“. I have worked in the software industry for almost 8 years now and I have seen so many developers sitting on their chairs and waiting for instructions from their lead about how to improve the code or what to do the next. When I talk to them, I suggest that the experiment with their server and try various techniques. I think they all should understand that for them, a development server is their production server and needs to pay proper attention to the code from the beginning. There should be NO any inappropriate code from the beginning. One has to fully focus and give their best, if they are not sure they should ask but should do something and stay active. Chapter 5 and 6 talks about two essential skills for any developer and database administration – what are the ethics of developers when they are working with production server and how to support software which is running on the production server. I have met many people who know the theory by heart but when put in front of keyboard they do not know where to start. The first thing they do opening the browser and searching online, instead of opening SQL Server Management Studio. This can very well happen to anybody who is experienced as well. Chapter 5 and 6 addresses that situation as well includes the handy scripts which can solve almost all the basic trouble shooting issues. “Where’s the Buffet?” By far, this is the best chapter in this book. If you have ever met me, you would know that I love food. I think after reading this chapter, I felt Thomas has written this just keeping me in mind. I think there will be many other people who feel the same way, too. Even my wife who read this chapter thought this was specifically written for me. I will not talk any more about this chapter as this is one must read chapter. And of course this is about real ‘FOOD‘. I am an SQL Server Trainer and Consultant and I totally agree with the point made in the chapter 8 of this book. Yes, it says here that what is necessary to train employees and people. Millions of dollars worth the labor is continuously done in the world which has faults and incorrect. Once something goes wrong, very expensive consultant comes in and fixes the problem. This whole cycle which can be stopped and improved if proper training is done. There is plenty of free trainings available as well, if one cannot afford paid training. “Connect. Learn. Share” – I think this is a great summary and bird’s eye view of this book. Networking is the key. Everything which is discussed in this book can be taken to next level if one properly uses this tips and continuously grow with it. Connecting with others, helping learn each other and building the good knowledge sharing environment should be the goal of everyone. Before I end the review I want to share a real experience. I have personally met one DBA who has worked in a single department in a company for so long that when he was put in a different department in his company due to closing that department, he could not adjust and quit the job despite the same people and company around him. Adjusting in the new environment gets much tougher as one person gets more and more experienced. This book precisely addresses the same issue along with their solutions. I just cannot stop comparing the book with my personal journey. I found so many things which are coincidently in the book is written as how we developer and DBA think. I must express special thanks to Thomas for taking time in his personal life and write this book for us. This book is indeed a book for everybody who wants to grow healthy in the tough and competitive environment. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, SQLServer, T SQL, Technology

Read the article

Add Free Google Apps to Your Website or Blog

- by Matthew Guay

Would you like to have an email address from your own domain, but prefer Gmail’s interface and integration with Google Docs? Here’s how you can add the free Google Apps Standard to your site and get the best of both worlds. Note: To signup for Google Apps and get it setup on your domain, you will need to be able to add info to your WordPress blog or change Domain settings manually. Getting Started Head to the Google Apps signup page (link below), and click the Get Started button on the right. Note that we are signing up for the free Google Apps which allows a max of 50 users; if you need more than 50 email addresses for your domain, you can choose Premiere Edition instead for $50/year. Select that you are the Administrator of the domain, and enter the domain or subdomain you want to use with Google Apps. Here we’re adding Google Apps to the techinch.com site, but we could instead add Apps to mail.techinch.com if needed…click Get Started. Enter your name, phone number, an existing email address, and other Administrator information. The Apps signup page also includes some survey questions about your organization, but you only have to fill in the required fields. On the next page, enter a username and password for the administrator account. Note that the user name will also be the administrative email address as [email protected]. Now you’re ready to authenticate your Google Apps account with your domain. The steps are slightly different depending on whether your site is on WordPress.com or on your own hosting service or server, so we’ll show how to do it both ways. Authenticate and Integrate Google Apps with WordPress.com To add Google Apps to a domain you have linked to your WordPress.com blog, select Change yourdomain.com CNAME record and click Continue. Copy the code under #2, which should be something like googleabcdefg123456. Do not click the button at the bottom; wait until we’ve completed the next step. Now, in a separate browser window or tab, open your WordPress Dashboard. Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Google Apps. Scroll down to the Google Apps section, and paste your code from Google Apps into the verification code field. Click Generate DNS records when you’re done. This will add the needed DNS settings to your records in the box above the Google Apps section. Click Save DNS records. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Authenticate Google Apps on Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Google Apps to your domain. You can add a CNAME record to your domain host using the same information that you would use with a WordPress account, or you can upload an HTML file to your site’s main directory. In this test we’re going to upload an HTML file to our site for verification. Copy the code under #1, which should be something like googleabcdefg123456. Do not click the button at the bottom; wait until we’ve completed the next step first. Create a new HTML file and paste the code in it. You can do this easily in Notepad: create a new document, paste the code, and then save as googlehostedservice.html. Make sure to select the type as All Files or otherwise the file will have a .txt extension. Upload this file to your web server via FTP or a web dashboard for your site. Make sure it is in the top level of your site’s directory structure, and try visiting it at yoursite.com/googlehostedservice.html. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Setup Your Email on Google Apps When this is done, your Google Apps account should be activated and ready to finish setting up. Google Apps will offer to launch a guide to step you through the rest of the process; you can click Launch guide if you want, or click Skip this guide to continue on your own and go directly to the Apps dashboard. If you choose to open the guide, you’ll be able to easily learn the ropes of Google Apps administration. Once you’ve completed the tutorial, you’ll be taken to the Google Apps dashboard. Most of the Google Apps will be available for immediate use, but Email may take a bit more setup. Click Activate email to get your Gmail-powered email running on your domain. Add Google MX Records to Your Server You will need to add Google MX records to your domain registrar in order to have your mail routed to Google. If your domain is hosted on WordPress.com, you’ve already made these changes so simply click I have completed these steps. Otherwise, you’ll need to manually add these records before clicking that button. Adding MX Entries is fairly easy, but the steps may depend on your hosting company or registrar. With some hosts, you may have to contact support to have them add the MX records for you. Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Add MX Entries through cPanel Login to your site’s cPanel, and click the MX Entry link under Mail. Delete any existing MX Records for your domain or subdomain first to avoid any complications or interactions with Google Apps. If you think you may want to revert to your old email service in the future, save a copy of the records so you can switch back if you need. Now, enter the MX Records that Google listed. Here’s our account after we added all of the entries to our account. Finally, return to your Google Apps Dashboard and click the I have completed these steps button at the bottom of the page. Activating Service You’re now officially finished activating and setting up your Google Apps account. Google will first have to check the MX records for your domain; this only took around an hour in our test, but Google warns it can take up to 48 hours in some cases. You may then see that Google is updating its servers with your account information. Once again, this took much less time than Google’s estimate. When everything’s finished, you can click the link to access the inbox of your new Administrator email account in Google Apps. Welcome to Gmail … at your own domain! All of the Google Apps work just the same in this version as they do in the public @gmail.com version, so you should feel right at home. You can return to the Google Apps dashboard from the Administrative email account by clicking the Manage this domain at the top right. In the Dashboard, you can easily add new users and email accounts, as well as change settings in your Google Apps account and add your site’s branding to your Apps. Your Google Apps will work just like their standard @gmail.com counterparts. Here’s an example of an inbox customized with the techinch logo and a Gmail theme. Links to Remember Here are the common links to your Google Apps online. Substitute your domain or subdomain for yourdomain.com. Dashboard https://www.google.com/a/cpanel/yourdomain.com Email https://mail.google.com/a/yourdomain.com Calendar https://www.google.com/calendar/hosted/yourdomain.com Docs https://docs.google.com/a/yourdomain.com Sites https://sites.google.com/a/yourdomain.com Conclusion Google Apps offers you great webapps and webmail for your domain, and let’s you take advantage of Google’s services while still maintaining the professional look of your own domain. Setting up your account can be slightly complicated, but once it’s finished, it will run seamlessly and you’ll never have to worry about email or collaboration with your team again. Signup for the free Google Apps Standard Similar Articles Productive Geek Tips Mysticgeek Blog: Create Your Own Simple iGoogle GadgetAccess Your Favorite Google Services in Chrome the Easy WayRevo Uninstaller Pro [REVIEW]Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPFind Similar Websites in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

Read the article

Stream Media and Live TV Across the Internet with Orb

- by DigitalGeekery

Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next. Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV. If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip. You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished. Next choose an analog provider, if necessary, and click Next. Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished. Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next. Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right… …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly. Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again. Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking. Playback will begin in the default media player for the streaming format. Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format. Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications and select Control Panel. You can also click Settings at the top right. Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS. Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished. Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile. By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device. Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App. Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and password and click OK. From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon. Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

Read the article

Configure TFS portal afterwards

Update #1 January 8th, 2010: There is an updated post on this topic for Beta 2: http://www.ewaldhofman.nl/post/2009/12/10/Configure-TFS-portal-afterwards-Beta-2.aspx Update #2 October 10th, 2010: In the new Team Foundation Server Power Tools September 2010, there is now a command to create a portal. tfpt addprojectportal Add or move portal for an existing team project Usage: tfpt addprojectportal /collection:uri /teamproject:"project name" /processtemplate:"template name" [/webapplication:"webappname"] [/relativepath:"pathfromwebapp"] [/validate] [/verbose] /collection Required. URL of Team Project Collection. /teamproject Required. Specifies the name of the team project. /processtemplate Required. Specifies that name of the process template. /webapplication The name of the SharePoint Web Application. Must also specify relativepath. /relativepath The path for the site relative to the root URL for the SharePoint Web Application. Must also specify webapplication. /validate Specifies that the user inputs are to be validated. If specified, only validation will be done and no portal setting will be changed. /verbose Switches on the verbose mode. I created a new Team Project in TFS 2010 Beta 1 and choose not to configure SharePoint during the creation of the Team Project. Of course I found out fairly quickly that a portal for TFS is very useful, especially the Iteration and the Product backlog workbooks and the dashboard reports. This blog describes how you can configure the sharepoint portal afterwards. Update: September 9th, 2009 Adding the portal afterwards is much easier as described below. Here are the steps Step 1: Create a new temporary project (with a SharePoint site for it). Open the Team Explorer Right click in the Team Explorer the root node (i.e. the project collection) Select "New team project" from the menu Walk throught he wizard and make sure you check the option to create the portal (which is by default checked) Step 2: Disable the site for the new project Open the Team Explorer Select the team project you created in step 1 In the menu click on Team -> Show Project Portal. In the menu click on Team -> Team Project Settings -> Portal Settings... The following dialog pops up Uncheck the option "Enable team project portal" Confirm the dialog with OK Step 3: Enable the site for the original one. Point it to the newly created site. Open the Team Explorer Select the team project you want to add the portal to In the menu open Team -> Team Project Settings -> Portal Settings... The same dialog as in step 2 pops up Check the option "Enable team project portal" Click on the "Configure URL" button The following dialog pops up In the dialog select in the combobox of the web application the TFS server Enter in the Relative site path the text "sites/[Project Collection Name]/[Team Project Name created in step 1]" Confirm the "Specify an existing SharePoint Site" with OK Check the "Reports and dashboards refer to data for this team project" option Confirm the dialog "Project Portal Settings" with OK Step 4: Delete the temporary project you created. In Beta 1, I have found no way to delete a team project. Maybe it will be available in TFS 2010 Beta 2. Original post Step 1: Create new portal site Go to the sharepoint site of your project collection (/sites//default.aspx">/sites//default.aspx">http://<servername>/sites/<project_collection_name>/default.aspx) Click on the Site Actions at the left side of the screen and choose the option Site Settings In the site settings, choose the Sites and workspaces option Create a new site Enter the values for the Title, the description, the site address. And choose for the TFS2010 Agile Dashboard as template. Create the site, by clicking on the Create button Step 2: Integrate portal site with team project Open Visual Studio Open the Team Explorer (View -> Team Explorer) Select in the Team Explorer tool window the Team Project for which you are create a new portal Open the Project Portal Settings (Team -> Team Project Settings -> Portal Setings...) Check the Enable team project portal checkbox Click on Configure URL... You will get a new dialog as below Enter the url to the TFS server in the web application combobox And specify the relative site path: sites/<project collection>/<site name> Confirm with OK Check in the Project Portal Settings dialog the checkbox "Reports and dashboards refer to data for this team project" Confirm the settings with OK (this takes a while...) When you now browse to the portal, you will see that the dashboards are now showing up with the data for the current team project. Step 3: Download process template To get a copy of the documents that are default in a team project, we need to have a fresh set of files that are not attached to a team project yet. You can do that with the following steps. Start the Process Template Manager (Team -> Team Project Collection Settings -> Process Template Manager...) Choose the Agile process template and click on download Choose a folder to download Step 4: Add Product and Iteration backlog Go to the Team Explorer in Visual Studio Make sure the team project is in the list of team projects, and expand the team project Right click the Documents node, and choose New Document Library Enter "Shared Documents", and click on Add Right click the Shared Documents node and choose Upload Document Go the the file location where you stored the process template from step 3 and then navigate to the subdirectory "Agile Process Template 5.0\MSF for Agile Software Development v5.0\Windows SharePoint Services\Shared Documents\Project Management" Select in the Open Dialog the files "Iteration Backlog" and "Product Backlog", and click Open Step 5: Bind Iteration backlog workbook to the team project Right click on the "Iteration Backlog" file and select Edit, and confirm any warning messages Place your cursor in cell A1 of the Iteration backlog worksheet Switch to the Team ribbon and click New List. Select your Team Project and click Connect From the New List dialog, select the Iteration Backlog query in the Workbook Queries folder. The final step is to add a set of document properties that allow the workbook to communicate with the TFS reporting warehouse. Before we create the properties we need to collect some information about your project. The first piece of information comes from the table created in the previous step. As you collect these properties, copy them into notepad so they can be used in later steps. Property How to retrieve the value? [Table name] Switch to the Design ribbon and select the Table Name value in the Properties portion of the ribbon [Project GUID] In the Visual Studio Team Explorer, right click your Team Project and select Properties. Select the URL value and copy the GUID (long value with lots of characters) at the end of the URL [Team Project name] In the Properties dialog, select the Name field and copy the value [TFS server name] In the Properties dialog, select the Server Name field and copy the value [UPDATE] I have found that this is not correct: you need to specify the instance of your SQL Server. The value is used to create a connection to the TFS cube. Switch back to the Iteration Backlog workbook. Click the Office button and select Prepare – Properties. Click the Document Properties – Server drop down and select Advanced Properties. Switch to the Custom tab and add the following properties using the values you collected above. Variable name Value [Table name]_ASServerName [TFS server name] [Table name]_ASDatabase tfs_warehouse [Table name]_TeamProjectName [Team Project name] [Table name]_TeamProjectId [Project GUID] Click OK to close the properties dialog. It is possible that the Estimated Work (Hours) is showing the #REF! value. To resolve that change the formula with: =SUMIFS([Table name][Original Estimate]; [Table name][Iteration Path];CurrentIteration&"*";[Table name][Area Path];AreaPath&"*";[Table name][Work Item Type]; "Task") For example =SUMIFS(VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Original Estimate]; VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Iteration Path];CurrentIteration&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Area Path];AreaPath&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Work Item Type]; "Task") Also the Total Remaining Work in the Individual Capacity table may contain #REF! values. To resolve that change the formula with: =SUMIFS([Table name][Remaining Work]; [Table name][Iteration Path];CurrentIteration&"*";[Table name][Area Path];AreaPath&"*";[Table name][Assigned To];[Team Member];[Table name][Work Item Type]; "Task") For example =SUMIFS(VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Remaining Work]; VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Iteration Path];CurrentIteration&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Area Path];AreaPath&"*";VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Assigned To];[Team Member];VSTS_ab392b55_6647_439a_bae4_8c66e908bc0d[Work Item Type]; "Task") Save and close the workbook. Step 6: Bind Product backlog workbook to the team project Repeat the steps for binding the Iteration backlog for thiw workbook too. In the worksheet Capacity, the formula of the Storypoints might be missing. You can resolve it with: =IF([Iteration]="";"";SUMIFS([Table name][Story Points];[Table name][Iteration Path];[Iteration]&"*")) Example =IF([Iteration]="";"";SUMIFS(VSTS_487f1e4c_db30_4302_b5e8_bd80195bc2ec[Story Points];VSTS_487f1e4c_db30_4302_b5e8_bd80195bc2ec[Iteration Path];[Iteration]&"*"))

Read the article

top tweets WebLogic Partner Community – October 2012

- by JuergenKress

Send your tweets @wlscommunity #WebLogicCommunity and follow us at http://twitter.com/wlscommunity WebLogic Community?@wlscommunity Real World Java EE Patterns by Adam Bien http://wp.me/p1LMIb-mp Markus Eisele?@myfear #JavaOne Content Available for Free https://blogs.oracle.com/java/entry/javaone_content_available_for_free … /via @java Adam Bien?@AdamBien Thought that 1h screencast is way too long to be popular. I was wrong. Lightweight Java EE is doing very well: http://www.adam-bien.com/roller/abien/entry/lightweight_java_ee_screencast … OracleBlogs?@OracleBlogs COLLABORATE 13 Call for Papers http://ow.ly/2szPuZ Oracle WebLogic?@OracleWebLogic New Blog Post: Data Source Security Part 1 http://ow.ly/2szFbv Markus Eisele?@myfear My Three Days at #JavaOne 2012 http://yakovfain.com/2012/10/04/my-three-days-at-javaone-2012/ … < nice writeup ;) Adam Bien?@AdamBien JavaOne 2012 Announcements And Surprises: NetBeans 7.3+ comes with HTML 5, JavaScript, CSS 3 support. JavaScript... http://bit.ly/Uy14eD Andrejus Baranovskis?@andrejusb OOW'12: Oracle ADF Implementations Around the Globe: Best Practices http://fb.me/1IVg6gzU0 gschmutz?@gschmutz Just published a blog with a wrap-up of my presentations at OOW 2012. https://guidoschmutz.wordpress.com/2012/10/07/my-presentations-at-oracle-open-world-2012/ … #oow2012 #trivadis Andrejus Baranovskis?@andrejusb OOW'12: Oracle Business Process Management/Oracle ADF Integration Best Practices http://fb.me/1GY3nz1lb WebLogic Community?@wlscommunity ExaLogic 2.01 ppt & training & Installation check-list & tips & Web tier roadmap http://wp.me/p1LMIb-mh Adam Bien?@AdamBien JavaOne 2012, First Feedback and The Strange Thing: NetBeans day was surprising well attended. A big room was fu... http://bit.ly/PwWwx8 OracleSupport_WLS?@weblogicsupport Free registration for our next webcast on setting up and using a #weblogic #cluster http://pub.vitrue.com/xWV8 WebLogic Community?@wlscommunity UKOUG Application Server & Middleware SIG Meeting http://wp.me/p1LMIb-mC Ronald Luttikhuizen?@rluttikhuizen Discussing future plans for Oracle Middleware Infrastructure Group with @simon_haslam @Jphjulstad and Rene van Wijk #oow @wlscommunity JAX London?@jaxlondon Be part of #JAXLondon- only 11 days to go! Still need a ticket? http://buff.ly/TUPKmL WebLogic Community?@wlscommunity ExaLogic X3-2 launched at OOW 2012 http://wp.me/p1LMIb-mM WebLogic Community?@wlscommunity @OracleEvents Dear Oracle Team thanks for promoting the WebLogic bootcamp, new schedules are online https://blogs.oracle.com/emeapartnerweblogic/resource/weblogic12c.htm … #weblogiccommunity OracleBlogs?@OracleBlogs Partner Webcast Introducing Oracle Business Activity Monitoring - 18 October 2012 http://ow.ly/2svzyz AMIS, Oracle & Java?@AMIS_Services Grant posted a nice little video on youtube about the #ADF EMG activities during Oracle Open World. http://youtu.be/qZhtBqnK-Zc GlassFish?@glassfish ADF Essentials - Available for free and certified on GlassFish!: If you are an Oracle customer, you are probably... http://bit.ly/UCtVwY OracleBlogs?@OracleBlogs WebLogic 12 hands-on bootcamps for partnersnew dates & locations http://ow.ly/2smOfs Pieter Kranenburg?@pskranenburg I'm EXA and I know IT! How about you? Go to http://bit.ly/OnSlDd and find out! (you might win an #iphone5 ;-) #OOW please RT Andrejus Baranovskis?@andrejusb Enabling WebLogic Administrator Group Inside Custom ADF Application http://fb.me/2d5SCeJ2g Michel Schildmeijer?@MNEMONIC01 I'm EXA and I know IT! How about you? Go to http://bit.ly/OnSlDd (you might win an #iphone5 ;-) #oow OracleSupport_WLS?@weblogicsupport Step-by-step instructions on how to configure mail Alerts in #OEM 11g for #WebLogic Servers up/down status http://pub.vitrue.com/KpZq Jeff West?@jeffreyawest Answer: Deliver JMS message to a single node in a Weblogic Cluster with a Distributed Topic http://stackoverflow.com/a/12396492/697114?stw=2 … Java?@java Bucharest Java User Group: Launched and Growing! #JUG http://ow.ly/dDnbN OracleSupport_WLS?@weblogicsupport Don't shoot the messenger! #Java source code analyzer @ http://pub.vitrue.com/Cy2J JAX London?@jaxlondon .@BrianGoetz gives in depth session on the details of how #Lambda expressions are implemented in the #Java language at #JAXLondon" ADF Community DE?@ADFCommunityDE Webcast ADFNewsSession: ADF as a basis of Fusion Apps - the biggest ADF project ever. Sep 14, 8:30 AM CET. Dial in https://blogs.oracle.com/jdevotnharvest/entry/adf_partner_community_news_session … OracleBlogs?@OracleBlogs WebLogic & Coherence & Cloud presentations for customer meetings http://ow.ly/1mqwrC Pieter Kranenburg?@pskranenburg Seminar: Oracle WebLogic 12c at Qualogy. You are invited! http://bit.ly/Ps9LDF Oracle WebLogic?@OracleWebLogic New Blog Post: Oracle OpenWorld Update -- General Session: Oracle Fusion Middleware Strategies Driving Business Inno... http://ow.ly/2stylf Oracle Cloud Zone?@OracleCloudZone New partner programs for Oracle Cloud Solutions http://bit.ly/PrVq5O #cloud #oow Lucas Jellema?@lucasjellema The strategy on Java - JEE, SE, ME, FX: http://technology.amis.nl/2012/10/02/javaone-2012-strategy-and-technical-keynote/ … #javaone #oow_amis WebLogic Community?@wlscommunity Send your #WebLogicCommunity #oow pictures and blog posts @wlscommunity or http://www.facebook.com/weblogiccommunity … Enjoy OOW ;-) WebLogic Community?@wlscommunity Become an WebLogic 12c expert, attend our partner bootcampshttps://blogs.oracle.com/emeapartnerweblogic/resource/weblogic12c.htm … #WebLogicCommunity #opn AMIS, Oracle & Java?@AMIS_Services Volgende #oracle #ADF training bij @AMIS_SERVICES is van 12 tot 16 november. Meer info of aanmelden? http://www.amis.nl/Trainingen/oracle-adf-11g-applicatieontwikkeling/ … Devoxx?@Devoxx ALL the Devoxx 2011 talks are now freely available on Parleys @ http://www.parleys.com/#st=4&id=102998 Pls RT! Adam Bien?@AdamBien Use the coupon code "PLUMA" and you will get 20% off for "Real World Java EE Patterns": http://realworldpatterns.com Lucas Jellema?@lucasjellema Very good summary of the #JavaOne Technical Keynote last night: http://java.dzone.com/articles/javaone-2012-javaone-technical … Arun Gupta?@arungupta Blogged: JavaOne 2012 Keynote and GlassFish Party Pictures: Some pictures from the keynote ... And som... http://bit.ly/ViH0ue Lucas Jellema?@lucasjellema Most recent promoted build for GassFish 4.0 (EE7) has WebSocket support: to play with: http://dlc.sun.com.edgesuite.net/glassfish/4.0/promoted/ … #javaone michael palmeter?@michaelpalmeter If you haven't seen the 5-minute Exalogic demo, you need to (do it now!) - http://lnkd.in/GRqy3x Lonneke Dikmans?@lonnekedikmans VENNSTER BLOG: Running EclipseLink DBWS 2.4.0 on GlassFish 3.1.2 http://blog.vennster.nl/2012/09/running-eclipselink-dbws-240-on.html?spref=tw … WebLogic Community?@wlscommunity WebLogic Partner Community Newsletter September 2012 http://wp.me/p1LMIb-mf WebLogic Community?@wlscommunity again again again…. it is Oracle Open World 2012 http://wp.me/p1LMIb-m6 Markus Eisele?@myfear #WebLogic and #JavaEE Roadmap and Strategy Session at OOW http://ow.ly/2slZEY /via @OracleWebLogic Adam Bien?@AdamBien An Article About Java EE Connector Architectures 1.6 (JCA 1.6): The free Java Magazine article: Java EE Connect... http://bit.ly/St6sxq Lucas Jellema?@lucasjellema ADF Essentials - free to develop and to deploy (I said: free!) - http://www.oracle.com/technetwork/developer-tools/adf/overview/adfessentials-1719844.html … AMIS, Oracle & Java?@AMIS_Services Blog by Lucas Jellema: "Develop and Deploy ADF applications – free of charge using the new ADF Essentials" http://bit.ly/StAhxY Andrejus Baranovskis?@andrejusb ADF Essentials - Quick Technical Review http://fb.me/2hKCXyF43 OracleBlogs?@OracleBlogs GlassFish Extension for Oracle JDeveloper http://ow.ly/2slIO8 Retweetet von WebLogic Community Oracle Eclipse?@OEPE New Tutorial: Using ADF Faces and ADF Controller with Oracle Enterprise Pack for Eclipse. #OEPE http://pub.vitrue.com/QoUg Simon Haslam?@simon_haslam As of the last day or two there's a new Java Products Media Pack on http://edelivery.oracle.com (rather than it being in FMW pack) WebLogic Community?@wlscommunity top tweets WebLogic Partner Community – September 2012 http://wp.me/p1LMIb-m2 Adam Bien?@AdamBien I was interviewed by OTN: http://www.oracle.com/technetwork/articles/java/jaxawards-1843595.html …See you at JavaOne! Oracle WebLogic?@OracleWebLogic DevOps Basics for #WebLogic: Track Down High CPU Thread with ps, top and the new JDK7 jcmd tool. Great blog @frankmuz. http://ow.ly/dOBM4 Simon Haslam?@simon_haslam Looking for "oak style"(!) advanced content but you're a middleware specialist? See #ukoug2012 #middlewaresunday http://2012.ukoug.org/default.asp?p=9355 … Julien Ponge ?@jponge Just finished Java EE 6 + AngularJS samples for my upcoming middleware lectures. Code at https://github.com/jponge/todoapp-javaee6-angularjs … and https://github.com/jponge/todoapp-bosswatch … Markus Eisele?@myfear #Oracle #WebLogic is now totally #FREE for #Developer - more than just OTN license to develop the 1st prototype! http://bit.ly/SWltsR Markus Eisele?@myfear #WebSockets on #WebLogic Server http://ow.ly/1mv4QP by @wlsteve < need to give this a testdrive ;) OracleEnterpriseMgr?@oracle_em EM Blog : Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) is Available Now ! #em12c http://pub.vitrue.com/mk7o OracleBlogs?@OracleBlogs ADF training material now on the iPad http://ow.ly/1mqz1Q GlassFish?@glassfish GlassFish grows by 50% in Software Stack Market Share Report for August 2012 by @Jelastic http://awe.sm/o4ZAp WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

Read the article

Pluralsight Meet the Author Podcast on HTML5 Canvas Programming

- by dwahlin

In the latest installment of Pluralsight’s Meet the Author podcast series, Fritz Onion and I talk about my new course, HTML5 Canvas Fundamentals. In the interview I describe different canvas technologies covered throughout the course and a sample application at the end of the course that covers how to build a custom business chart from start to finish. Meet the Author: Dan Wahlin on HTML5 Canvas Fundamentals Transcript [Fritz] Hi. This is Fritz Onion. I’m here today with Dan Wahlin to talk about his new course HTML5 Canvas Fundamentals. Dan founded the Wahlin Group, which you can find at thewahlingroup.com, which specializes in ASP.NET, jQuery, Silverlight, and SharePoint consulting. He’s a Microsoft Regional Director and has been awarded Microsoft’s MVP for ASP.NET, Connected Systems, and Silverlight. Dan is on the INETA Bureau’s — Speaker’s Bureau, speaks at conferences and user groups around the world, and has written several books on .NET. Thanks for talking to me today, Dan. [Dan] Always good to talk with you, Fritz. [Fritz] So this new course of yours, HTML5 Canvas Fundamentals, I have to say that most of the really snazzy demos I’ve seen with HTML5 have involved Canvas, so I thought it would be a good starting point to chat with you about why we decided to create a course dedicated just to Canvas. If you want to kind of give us that perspective. [Dan] Sure. So, you know, there’s quite a bit of material out there on HTML5 in general, and as people that have done a lot with HTML5 are probably aware, a lot of HTML5 is actually JavaScript centric. You know, a lot of people when they first learn it, think it’s tags, but most of it’s actually JavaScript, and it just so happens that the HTML5 Canvas is one of those things. And so it’s not just, you know, a tag you add and it just magically draws all these things. You mentioned there’s a lot of cool things you can do from games to there’s some really cool multimedia applications out there where they integrate video and audio and all kinds of things into the Canvas, to more business scenarios such as charting and things along those lines. So the reason we made a course specifically on it is, a lot of the material out there touches on it but the Canvas is actually a pretty deep topic. You can do some pretty advanced stuff or easy stuff depending on what your application requirements are, and the API itself, you know, there’s over 30 functions just in the Canvas API and then a whole set of properties that actually go with that as well. So it’s a pretty big topic, and that’s why we created a course specifically tailored towards just the Canvas. [Fritz] Right. And let’s — let me just review the outline briefly here for everyone. So you start off with an introduction to getting started with Canvas, drawing with the HTML5 Canvas, then you talk about manipulating pixels, and you finish up with building a custom data chart. So I really like your example flow here. I think it will appeal to even business developers, right. Even if you’re not into HTML5 for the games or the media capabilities, there’s still something here for everyone I think working with the Canvas. Which leads me to another question, which is, where do you see the Canvas fitting in to kind of your day-to-day developer, people that are working business applications and maybe vanilla websites that aren’t doing kind of cutting edge stuff with interactivity with users? Is there a still a place for the Canvas in those scenarios? [Dan] Yeah, definitely. I think a lot of us — and I include myself here — over the last few years, the focus has generally been, especially if you’re, let’s say, a PHP or ASP.NET or Java type of developer, we’re kind of accustomed to working on the server side, and, you know, we kind of relied on Flash or Silverlight or these other plug-ins for the client side stuff when it was kind of fancy, like charts and graphs and things along those lines. With the what I call massive shift of applications, you know, mainly because of mobile, to more of client side, one of the big benefits I think from a maybe corporate standard way of thinking of things, since we do a lot of work with different corporations, is that, number one, rather than having to have the plug-in, which of course isn’t going to work on iPad and some of these other devices out there that are pretty popular, you can now use a built-in technology that all the modern browsers support, and that includes things like Safari on the iPad and iPhone and the Android tablets and things like that with their browsers, and actually render some really sophisticated charts. Whether you do it by scratch or from scratch or, you know, get a third party type of library involved, it’s just JavaScript. So it downloads fast so it’s good from a performance perspective; and when it comes to what you can render, it’s extremely robust. You can do everything from, you know, your basic circles to polygons or polylines to really advanced gradients as well and even provide some interactivity and animations, and that’s some of the stuff I touch upon in the class. In fact, you mentioned the last part of the outline there is building a custom data chart and that’s kind of gears towards more of the, what I’d call enterprise or corporate type developer. [Fritz] Yeah, that makes sense. And it’s, you know, a lot of the demos I’ve seen with HTML5 focus on more the interactivity and kind of game side of things, but the Canvas is such a diverse element within HTML5 that I can see it being applicable pretty much anywhere. So why don’t we talk a little bit about some of the specifics of what you cover? You talk about drawing and then manipulating pixels. You want to kind of give us the different ways of working with the Canvas and what some of those APIs provide for you? [Dan] Sure. So going all the way back to the start of the outline, we actually started off by showing different demonstrations of the Canvas in action, and we show some fun stuff — multimedia apps and games and things like that — and then also some more business scenarios; and then once you see that, hopefully it kinds of piques your interest and you go, oh, wow, this is actually pretty phenomenal what you can do. So then we start you off with, so how to you actually draw things. Now, there are some libraries out there that will draw things like graphs, but if you want to customize those or just build something you have from scratch, you need to know the basics, such as, you know, how do you draw circles and lines and arcs and Bezier curves and all those fancy types of shapes that a given chart may have on it or that a game may have in it for that matter. So we start off by covering what I call the core API functions; how do you, for instance, fill a rectangle or convert that to a square by setting the height and the width; how do you draw arcs or different types of curves and there’s different types supported such as I mentioned Bezier curves or quadratic curves; and then we also talk about how do you integrate text into it. You might have some images already that are just regular bitmap type images that you want to integrate, you can do that with a Canvas. And you can even sync video into the Canvas, which actually opens up some pretty interesting possibilities for both business and I think just general multimedia apps. Once you kind of get those core functions down for the basic shapes that you need to be able to draw on any type of Canvas, then we go a little deeper into what are the pixels that are there to manipulate. And that’s one of the important things to understand about the HTML5 Canvas, scalable vector graphics is another thing you can use now in the modern browsers; it’s vector based. Canvas is pixel based. And so we talk about how to do gradients, how can you do transforms, you know, how do you scale things or rotate things, which is extremely useful for charts ’cause you might have text that, you know, flips up on its side for a y-axis or something like that. And you can even do direct pixel manipulation. So it’s really, really powerful. If you want to get down to the RGBA level, you can do that, and I show how to do that in the course, and then kind of wrap that section up with some animation fundamentals. [Fritz] Great. Yeah, that’s really powerful stuff for programmatically rendering data to clients and responding to user inputs. Look forward to seeing what everyone’s going to come up with building this stuff. So great. That’s — that’s HTML5 Canvas Fundamentals with Dan Wahlin. Thanks very much, Dan. [Dan] Thanks again. I appreciate it.

Read the article

CodePlex Daily Summary for Wednesday, March 17, 2010

CodePlex Daily Summary for Wednesday, March 17, 2010New Projectschaosreader: A simple RSS reader.CRM 4.0 Customization GUID Update: The CRM 4.0 customization GUID update is an open source C# console application that automatically replaces GUID values in your exported workflow cu...DotNetNuke® Skin Bright: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Noel Jerke of SiteToolset. This simple and clean business...DotNetNuke® Skin Go: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by DnnGo Corporation. The skin uses web standard DIV+CSS tec...DotNetNuke® Skin J10blend: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Timthy Maler of 2M Studio Design. J10-Black v01.00.00 inc...DotNetNuke® Skin Recipe: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by dnnprofis.at. For mobile devices the skin changes to a mobile...DotNetNuke® Skin SpaceSmurfs: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Eric Johnson of Personify Design. This fun personal skin was ins...ERDOS6 - Web: A Web Project about ERDOS 6Flickrlight: Flickrlight is a personal fun project out of love of Flickr and Silverlight. You can experience it here: http://www.flickrlight.net.GsGrid: Extracting data from Gaussian grid file and grid file calculationiLocator: iLocator is a collaborative educational mapping game for children developed on Microsoft Surface. This game encourages players to collaborate with ...Javascript CallObject SOAP AJAX Helper: CallObject is a Javascript based AJAX helper, it facilitates wrapping of basic soap calls (as long as simple data types are used), asynchronous ret...kbTrainer: kbTrainer is a simple to use HTML application for typing speed training. A lot of features completed in basic. 2 learning keywords layouts -- engli...Laboratório de Engenharia de Software - Projeto: Criado para estudar e aplicar novas tecnologias web.Maxilds Powershell Scripts: Repo of my powershell scriptsNamespacifier: Namespacifier is a C#.NET library and console application to fix XML documents containing multiple default namespaces. It gives prefixes to defaul...OData SDK for Objective-C: This is a CTP of the OData SDK for Objective-C. The library targets iPhone devices and Mac OS X and it is designed to facilitate the connection wit...Open Data App Framework (ODAF): The Open Data Application Framework (ODAF) is a framework that allows cities to easily map existing civic Open Data landmarks, and allow users to r...QuickieB2B: QuickieB2B is web application which main target is to provide quick info about products. It's designed for small companies who have a big number of...RayView: Rayview is an easy-to-use Raytracing-Framework based on Microsoft XNA.Robotics Studio application to navigate Lego Mindstorms robot through labyrinth: A project for Software Systems Analysis and Design Tools subject at the Kaunas University of Technology. The main point of the project is to code L...SharePoint Icon Integration: SharePoint Icon Integration makes it easier for SharePoint Administrators / Developers to add a icon (pdf) to the SharePoint farm. You will no long...TestVersion: Testing VersionieringTimecard: SoftSource Timecard project.T-shirt Cannon: So the Coding4Fun team had two weeks to build two robots able to drive, aim, and shoot t-shirts with a Windows Phone during a MIX10 Keynote demo of...USTF: This project is a bit secretive right now.Windows Azure Command-line Tools for PHP Developers: The “Windows Azure Command-line tools for PHP” provide a command-line experience to developers who wish to develop, package, and deploy PHP applic...New ReleasesCaramel Engine: CaramelEngine Alpha Build 0.0.0.1a: This is an early alpha release of the Engine and it's functionality. Be sure to have the using CaramelEngine statement. This release is for people...Coot: Preview: Basic preview On the first use you have to click Create New Session and Login. After this you can just click Screen Saver each time. Settings sho...CycleMania Starter Kit EAP - ASP.NET 4.0 Problem - Design - Solution: Cyclemania 0.08.32: The latest alpha release.DeepZoomContainer, Expanded DeepZoom for Silverlight & Windows Phone 7 Series: Release ver. 1.20 for Windows Phone 7 Series: SolutionMerge PathAnimation solution into one MouseWheel elimination PathAnimationWP7 Port DeepZoomContainerProject rebuilt for WP7 support De...Desktop Google Reader: 1.3 (the social release): NewsSharing Liking Mail item Labels / Tags Send to Twitter Read It Later http://readitlaterlist.com/ Instapaper http://www.instapaper.com/ Favicons...DotNetNuke® Blog: 04.00.00 RC 2: PLEASE NOTE: Please do not upgrade previous version of the Beta releases - please start from 03.05.01 This is a RELEASE CANDIDATE, and as such ...DotNetNuke® Community Edition: 05.03.00: New FeaturesTemplated User Profiles - User profile pages are now publicly viewable Photo field in User Profile - Users can upload a photo to thei...DotNetNuke® Skin Bright: Bright Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Noel Jerke of SiteToolset. This simple and clean business...DotNetNuke® Skin Go: Go Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by DnnGo Corporation. The skin uses web standard DIV+CSS tec...DotNetNuke® Skin J10blend: J10 Blend Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Timthy Maler of 2M Studio Design. J10-Black v01.00.00 incl...DotNetNuke® Skin Recipe: Recipe Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by dnnprofis.at. For mobile devices the skin changes to a mobile f...DotNetNuke® Skin SpaceSmurfs: Space Smurfs Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Eric Johnson of Personify Design. This fun personal skin was ins...Dynamo: Dynamo v0.1 Beta: The following is included: Dynamo dlls Antlr dlls Hello world Simple Plugin example Application Dependency injection Singleton Managment ...ExtremeML: ExtremeML v1.0 Beta 1: Timed to accompany the RTM release of the OpenXML SDK v2.0, this is the first Beta release of ExtremeML (it was previously classified as a preview ...Family Tree Analyzer: Version 1.1.1.1: Version 1.1.1.1 Lots of Gedcom parsing fixes it should crash a whole lot less often and tolerate more "interesting" or "quirky" Gedcom entries. Add...Family Tree Analyzer: Version 1.2.0.1: Version 1.2.0.1 Added option to treat residence facts as Census Facts IGI Search now permits default country selection ie: what to use if it doesn...Flickrlight: Flickrlight: Current release is for idea sharing. There are not many design patterns being used. Please bare with the mess. :-) In order to run the applicat...Gherkin editor: Alpha 0.1: Most of the code at this point is the same as the Avalon.Sample from code project, just changed the name, removed extra languages and added syntax ...GsGrid: gsgrid1.6.4: gsgrid1.6.4GsGrid: gsgrid1.6.4-src: gsgrid1.6.4-srcHTML Template Repeater Module: Version 01.00.02: GeneralThe HTML Template Repeater Module is a direct replacement for the Core DotNetNuke Text/HTML module. Use it where you need to repeat the form...Images Compiler: Release 0.1: Last alpha buildJavascript CallObject SOAP AJAX Helper: Beta Release, 0.2.1: Beta Release, 0.2.1 Contains only core objectskbTrainer: kbtrainer 1.25u: kbTrainer is a simple to use speed typing training HTML application. A lot of features. All ither info availiable on http://code.google.com/p/kbtr...MapWindow6: MapWindow 6.0 msi (March 16): This version fixes a bug where selected points were not drawing correctly.Mesopotamia Experiment: Mesopotamia 1.2.43: Release Notes New Features - Scenario Name on title bar - Show organisms in Scnearios with simple stats Bug Fixes - Removed app domain recyling an...MFCMAPI: March 2010 Release: If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. Build: 6.0.0.1018 The 64 bit bu...MVVM Light Toolkit: MVVM Light Toolkit V3: Download the Zip file and extract it to a local folder. Then, follow the instructions on the Installation page http://www.galasoft.ch/mvvm/installi...NETXPF: 1.0.2: Changes: - Added a class "IOUtils" with methods for reading streams and GZip-compressing HTTP responses - Fixed a bug in the size formatter (excep...OData SDK for Objective-C: OData SDK for Objective-C CTP: The current release supports read-only operations only and it has been tested on a limited set of scenarios. The download include a sample iPhone a...Open Data App Framework (ODAF): ODAF 1.0: Initial beta release.Selection Maker: Selection Maker 1.1: New FeaturesContext Menu for ListView added Bug FixesFixed: If the users press Copy/Cut Button when no item is selected in ListView the ListView cl...Selection Maker: Selection Maker 1.2: Bug Fixes:a minor bug fixedSimple.NET: Simple.Mocking 1.0.0.5: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...SQL Server Extended Properties Quick Editor: New release 1.5.4: Whats new: Move preferences to application settings and add a form to edit preferences. Support to add, modify and delete operations could be made ...SuperModel - A Dynamic View-Model Generator: 1.0.0.0 - Tyra: The final 1.0 release, now less intrusive! If you don't want to implement ISuperModel, simply implement INotifyPropertyChanged.Timecard: Timecard Initial Release: The zipped version of the Initial Checkin.Transparent Persistence.Net: TP.Net 0.1.0: This is the initial alpha release. It's working for small set of use-cases (basic access to Cassandra).VCC: Latest build, v2.1.30316.0: Automatic drop of latest buildVFPnfe: Projeto Ajuda PAF-ECF: Este projeto visa ajudar aos desenvolvedores para homologação do PAF-ECF , sob licença publica GNU/GPL para ver mais detalhes do mesmo assista o vi...Visual Studio DSite: Gif Animator: This program will make an animate gif. (Program written in Vb.Net 2008)Most Popular ProjectsMetaSharpLiveUpload to FacebookSkype Voice ChangerLiveUpload to YouTubeSIPSorceryChartPart for SharePointTFS Branching Guide 2.0TouchFlo DetacherNPandaySnippet EditorMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPDirectQpatterns & practices – Enterprise LibraryBlogEngine.NETN2 CMSOpen Data App Framework (ODAF)NB_Store - Free DotNetNuke Ecommerce Catalog ModuleMapWindow6

Read the article

Building the Ultimate SharePoint 2010 Development Environment

- by Manesh Karunakaran

It’s been more than a month since SharePoint 2010 RTMed. And a lot of people have downloaded and set up their very own SharePoint 2010 development rigs. And quite a few people have written blogs about setting up good development environments, there is even an MSDN article on it. Two of the blogs worth noting are from MVPs Sahil Malik and Wictor Wilén. Make sure that you check these out as well. Part of the bad side-effects of being a geek is the need to do the technical stuff the best way possible (pragmatic or otherwise), but the problem with this is that what is considered “best” is relative. Precisely the reason why you are reading this post now. Most of the posts that I read are out dated/need updations or are using the wrong OS’es or virtualization solutions (again, opinions vary) or using them the wrong way. Here’s a developer’s view of Building the Ultimate SharePoint 2010 Development Rig. If you are a sales guy, it’s time to close this window. Confusion 1: Which Host Operating System and Virtualization Solution to use? This point has been beaten to death in numerous blog posts in the past, if you have time to invest, read this excellent post by our very own SharePoint Joel on this subject. But if you are planning to build the Ultimate Development Rig, then Windows Server 2008 R2 with Hyper-V is the option that you should be looking at. I have been using this as my primary OS for about 6-7 months now, and I haven’t had any Driver issue or Application compatibility issue. In my experience all the Windows 7 drivers work fine with WIN2008 R2 also. You can enable Aero for eye candy (and the Windows 7 look and feel) and except for a few things like the Hibernation support (which a can be enabled if you really want it), Windows Server 2008 R2, is the best Workstation OS that I have used till date. But frankly the answer to this question of which OS to use depends primarily on one question - Are you willing to change your primary OS? If the answer to that is ‘Yes’, then Windows 2008 R2 with Hyper-V is the best option, if not look at vmWare or VirtualBox, both are equally good. Those who are familiar with a Virtual PC background might prefer Sun VirtualBox. Besides, these provide support for running 64 bit guest machines on 32 bit hosts if the underlying hardware is truly 64 bit. See my earlier post on this. Since we are going to make the ultimate rig, we will use Windows Server 2008 R2 with Hyper-V, for reasons mentioned above. Confusion 2: Should I use a multi-(virtual) server set up? A lot of people use multiple servers for their development environments - like Wictor Wilén is suggesting - one server hosting the Active directory, one hosting SharePoint Server and another one for SQL Server. True, this mimics the production environment the best possible way, but as somebody who has fallen for this set up earlier, I can tell you that you don’t really get anything by doing this. Microsoft has done well to ensure that if you can do it on one machine, you can do it in a farm environment as well. Besides, when you run multiple Server class machine instances in parallel, there are a lot of unwanted processor cycles wasted for no good use. In my personal experience, as somebody who needs to switch between MOSS 2007/SharePoint 2010 environments from time to time, the best possible solution is to Make the host Windows Server 2008 R2 machine your Domain Controller (AD Server) Make all your Virtual Guest OS’es join this domain. Have each Individual Guest OS Image have it’s own local SQL Server instance. The advantages are that you can reuse the users and groups in each of the Guest operating systems, you can manage the users in one place, AD is light weight and doesn't take too much resources on your host machine and also having separate SQL instances for each of the Development images gives you maximum flexibility in terms of configuration, for example your SharePoint rigs can have simpler DB configurations, compared to your MS BI blast pits. Confusion 3: Which Operating System should I use to run SharePoint 2010 Now that’s a no brainer. Use Windows 2008 R2 as your Guest OS. When you are building the ultimate rig, why compromise? If you are planning to run Windows Server 2008 as your Guest OS, there are a few patches that you need to install at different times during the installation, for that follow the steps mentioned here Okay now that we have made our choices, let’s get to the interesting part of building the rig, Step 1: Prepare the host machine – Install Windows Server 2008 R2 Install Windows Server 2008 R2 on your best Desktop/Laptop. If you have read this far, I am quite sure that you are somebody who can install an OS on your own, so go ahead and do that. Make sure that you run the compatibility wizard before you go ahead and nuke your current OS. There are plenty of blogs telling you how to make a good Windows 2008 R2 Workstation that feels and behaves like a Windows 7 machine, follow one and once you are done, head to Step 2. Step 2: Configure the host machine as a Domain Controller Before we begin this, let me tell you, this step is completely optional, you don’t really need to do this, you can simply use the local users on the Guest machines instead, but if this is a much cleaner approach to manage users and groups if you run multiple guest operating systems. This post neatly explains how to configure your Windows Server 2008 R2 host machine as a Domain Controller. Follow those simple steps and you are good to go. If you are not able to get it to work, try this. Step 3: Prepare the guest machine – Install Windows Server 2008 R2 Open Hyper-V Manager Choose to Create a new Guest Operating system Allocate at least 2 GB of Memory to the Guest OS Choose the Windows 2008 R2 Installation Media Start the Virtual Machine to commence installation. Once the Installation is done, Activate the OS. Step 4: Make the Guest operating systems Join the Domain This step is quite simple, just follow these steps below, Fire up Hyper-V Manager, open your Guest OS Click on Start, and Right click on ‘Computer’ and choose ‘Properties’ On the window that pops-up, click on ‘Change Settings’ On the ‘System Properties’ Window that comes up, Click on the ‘Change’ button Now a window named ‘Computer Name/Domain Changes’ opens up, In the text box titled Domain, type in the Domain name from Step 2. Click Ok and windows will show you the welcome to domain message and ask you to restart the machine, click OK to restart. If the addition to domain fails, that means that you have not set up networking in Hyper-V for the Guest OS to communicate with the Host. To enable it, follow the steps I had mentioned in this post earlier. Step 5: Install SQL Server 2008 R2 on the Guest Machine SQL Server 2008 R2 gets installed with out hassle on Windows Server 2008 R2. SQL Server 2008 needs SP2 to work properly on WIN2008 R2. Also SQL Server 2008 R2 allows you to directly add PowerPivot support to SharePoint. Choose to install in SharePoint Integrated Mode in Reporting Server Configuration. Step 6: Install KB971831 and SharePoint 2010 Pre-requisites Now install the WCF Hotfix for Microsoft Windows (KB971831) from this location, and SharePoint 2010 Pre-requisites from the SP2010 Installation media. Step 7: Install and Configure SharePoint 2010 Install SharePoint 2010 from the installation media, after the installation is complete, you are prompted to start the SharePoint Products and Technologies Configuration Wizard. If you are using a local instance of Microsoft SQL Server 2008, install the Microsoft SQL Server 2008 KB 970315 x64 before starting the wizard. If your development environment uses a remote instance of Microsoft SQL Server 2008 or if it has a pre-existing installation of Microsoft SQL Server 2008 on which KB 970315 x64 has already been applied, this step is not necessary. With the wizard open, do the following: Install SQL Server 2008 KB 970315 x64. After the Microsoft SQL Server 2008 KB 970315 x64 installation is finished, complete the wizard. Alternatively, you can choose not to run the wizard by clearing the SharePoint Products and Technologies Configuration Wizard check box and closing the completed installation dialog box. Install SQL Server 2008 KB 970315 x64, and then manually start the SharePoint Products and Technologies Configuration Wizard by opening a Command Prompt window and executing the following command: C:\Program Files\Common Files\Microsoft Shared Debug\Web Server Extensions\14\BIN\psconfigui.exe The SharePoint Products and Technologies Configuration Wizard may fail if you are using a computer that is joined to a domain but that is not connected to a domain controller. Step 8: Install Visual Studio 2010 and SharePoint 2010 SDK Install Visual Studio 2010 Download and Install the Microsoft SharePoint 2010 SDK Step 9: Install PowerPivot for SharePoint and Configure Reporting Services Pop-In the SQLServer 2008 R2 installation media once again and install PowerPivot for SharePoint. This will get added as another instance named POWERPIVOT. Configure Reporting Services by following the steps mentioned here, if you need to get down to the details on how the integration between SharePoint 2010 and SQL Server 2008 R2 works, see Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010 an excellent article by Alan Le Marquand Step 10: Download and Install Sample Databases for Microsoft SQL Server 2008R2 SharePoint 2010 comes with a lot of cool stuff like PerformancePoint Services and BCS, if you need to try these out, you need to have data in your databases. So if you want to save yourself the trouble of creating sample data for your PerformancePoint and BCS experiments, download and install Sample Databases for Microsoft SQL Server 2008R2 from CodePlex. And you are done! Fire up your Visual Studio 2010 and Start Coding away!!

Read the article

Anunciando: Grandes Melhorias para Web Sites da Windows Azure

- by Leniel Macaferi

Estou animado para anunciar algumas grandes melhorias para os Web Sites da Windows Azure que introduzimos no início deste verão. As melhorias de hoje incluem: uma nova opção de hospedagem adaptável compartilhada de baixo custo, suporte a domínios personalizados para websites hospedados em modo compartilhado ou em modo reservado usando registros CNAME e A-Records (o último permitindo naked domains), suporte para deployment contínuo usando tanto CodePlex e GitHub, e a extensibilidade FastCGI. Todas essas melhorias estão agora online em produção e disponíveis para serem usadas imediatamente. Nova Camada Escalonável "Compartilhada" A Windows Azure permite que você implante e hospede até 10 websites em um ambiente gratuito e compartilhado com múltiplas aplicações. Você pode começar a desenvolver e testar websites sem nenhum custo usando este modo compartilhado (gratuito). O modo compartilhado suporta a capacidade de executar sites que servem até 165MB/dia de conteúdo (5GB/mês). Todas as capacidades que introduzimos em Junho com esta camada gratuita permanecem inalteradas com a atualização de hoje. Começando com o lançamento de hoje, você pode agora aumentar elasticamente seu website para além desta capacidade usando uma nova opção "shared" (compartilhada) de baixo custo (a qual estamos apresentando hoje), bem como pode usar a opção "reserved instance" (instância reservada) - a qual suportamos desde Junho. Aumentar a capacidade de qualquer um desses modos é fácil. Basta clicar na aba "scale" (aumentar a capacidade) do seu website dentro do Portal da Windows Azure, escolher a opção de modo de hospedagem que você deseja usar com ele, e clicar no botão "Salvar". Mudanças levam apenas alguns segundos para serem aplicadas e não requerem nenhum código para serem alteradas e também não requerem que a aplicação seja reimplantada/reinstalada: A seguir estão mais alguns detalhes sobre a nova opção "shared" (compartilhada), bem como a opção existente "reserved" (reservada): Modo Compartilhado Com o lançamento de hoje, estamos introduzindo um novo modo de hospedagem de baixo custo "compartilhado" para Web Sites da Windows Azure. Um website em execução no modo compartilhado é implantado/instalado em um ambiente de hospedagem compartilhado com várias outras aplicações. Ao contrário da opção de modo free (gratuito), um web-site no modo compartilhado não tem quotas/limite máximo para a quantidade de largura de banda que o mesmo pode servir. Os primeiros 5 GB/mês de banda que você servir com uma website compartilhado é grátis, e então você passará a pagar a taxa padrão "pay as you go" (pague pelo que utilizar) da largura de banda de saída da Windows Azure quando a banda de saída ultrapassar os 5 GB. Um website em execução no modo compartilhado agora também suporta a capacidade de mapear múltiplos nomes de domínio DNS personalizados, usando ambos CNAMEs e A-records para tanto. O novo suporte A-record que estamos introduzindo com o lançamento de hoje oferece a possibilidade para você suportar "naked domains" (domínios nús - sem o www) com seus web-sites (por exemplo, http://microsoft.com além de http://www.microsoft.com). Nós também, no futuro, permitiremos SSL baseada em SNI como um recurso nativo nos websites que rodam em modo compartilhado (esta funcionalidade não é suportada com o lançamento de hoje - mas chagará mais tarde ainda este ano, para ambos as opções de hospedagem - compartilhada e reservada). Você paga por um website no modo compartilhado utilizando o modelo padrão "pay as you go" que suportamos com outros recursos da Windows Azure (ou seja, sem custos iniciais, e você só paga pelas horas nas quais o recurso estiver ativo). Um web-site em execução no modo compartilhado custa apenas 1,3 centavos/hora durante este período de preview (isso dá uma média de $ 9.36/mês ou R$ 19,00/mês - dólar a R$ 2,03 em 17-Setembro-2012) Modo Reservado Além de executar sites em modo compartilhado, também suportamos a execução dos mesmos dentro de uma instância reservada. Quando rodando em modo de instância reservada, seus sites terão a garantia de serem executados de maneira isolada dentro de sua própria VM (virtual machine - máquina virtual) Pequena, Média ou Grande (o que significa que, nenhum outro cliente da Windows azure terá suas aplicações sendo executadas dentro de sua VM. Somente as suas aplicações). Você pode executar qualquer número de websites dentro de uma máquina virtual, e não existem quotas para limites de CPU ou memória. Você pode executar seus sites usando uma única VM de instância reservada, ou pode aumentar a capacidade tendo várias instâncias (por exemplo, 2 VMs de médio porte, etc.). Dimensionar para cima ou para baixo é fácil - basta selecionar a VM da instância "reservada" dentro da aba "scale" no Portal da Windows Azure, escolher o tamanho da VM que você quer, o número de instâncias que você deseja executar e clicar em salvar. As alterações têm efeito em segundos: Ao contrário do modo compartilhado, não há custo por site quando se roda no modo reservado. Em vez disso, você só paga pelas instâncias de VMs reservadas que você usar - e você pode executar qualquer número de websites que você quiser dentro delas, sem custo adicional (por exemplo, você pode executar um único site dentro de uma instância de VM reservada ou 100 websites dentro dela com o mesmo custo). VMs de instâncias reservadas têm um custo inicial de $ 8 cents/hora ou R$ 16 centavos/hora para uma pequena VM reservada. Dimensionamento Elástico para Cima/para Baixo Os Web Sites da Windows Azure permitem que você dimensione para cima ou para baixo a sua capacidade dentro de segundos. Isso permite que você implante um site usando a opção de modo compartilhado, para começar, e em seguida, dinamicamente aumente a capacidade usando a opção de modo reservado somente quando você precisar - sem que você tenha que alterar qualquer código ou reimplantar sua aplicação. Se o tráfego do seu site diminuir, você pode diminuir o número de instâncias reservadas que você estiver usando, ou voltar para a camada de modo compartilhado - tudo em segundos e sem ter que mudar o código, reimplantar a aplicação ou ajustar os mapeamentos de DNS. Você também pode usar o "Dashboard" (Painel de Controle) dentro do Portal da Windows Azure para facilmente monitorar a carga do seu site em tempo real (ele mostra não apenas as solicitações/segundo e a largura de banda consumida, mas também estatísticas como a utilização de CPU e memória). Devido ao modelo de preços "pay as you go" da Windows Azure, você só paga a capacidade de computação que você usar em uma determinada hora. Assim, se o seu site está funcionando a maior parte do mês em modo compartilhado (a $ 1.3 cents/hora ou R$ 2,64 centavos/hora), mas há um final de semana em que ele fica muito popular e você decide aumentar sua capacidade colocando-o em modo reservado para que seja executado em sua própria VM dedicada (a $ 8 cents/hora ou R$ 16 centavos/hora), você só terá que pagar os centavos/hora adicionais para as horas em que o site estiver sendo executado no modo reservado. Você não precisa pagar nenhum custo inicial para habilitar isso, e uma vez que você retornar seu site para o modo compartilhado, você voltará a pagar $ 1.3 cents/hora ou R$ 2,64 centavos/hora). Isto faz com que essa opção seja super flexível e de baixo custo. Suporte Melhorado para Domínio Personalizado Web sites em execução no modo "compartilhado" ou no modo "reservado" suportam a habilidade de terem nomes personalizados (host names) associados a eles (por exemplo www.mysitename.com). Você pode associar múltiplos domínios personalizados para cada Web Site da Windows Azure. Com o lançamento de hoje estamos introduzindo suporte para registros A-Records (um recurso muito pedido pelos usuários). Com o suporte a A-Record, agora você pode associar domínios 'naked' ao seu Web Site da Windows Azure - ou seja, em vez de ter que usar www.mysitename.com você pode simplesmente usar mysitename.com (sem o prefixo www). Tendo em vista que você pode mapear vários domínios para um único site, você pode, opcionalmente, permitir ambos domínios (com www e a versão 'naked') para um site (e então usar uma regra de reescrita de URL/redirecionamento (em Inglês) para evitar problemas de SEO). Nós também melhoramos a interface do usuário para o gerenciamento de domínios personalizados dentro do Portal da Windows Azure como parte do lançamento de hoje. Clicando no botão "Manage Domains" (Gerenciar Domínios) na bandeja na parte inferior do portal agora traz uma interface de usuário personalizada que torna fácil gerenciar/configurar os domínios: Como parte dessa atualização nós também tornamos significativamente mais suave/mais fácil validar a posse de domínios personalizados, e também tornamos mais fácil alternar entre sites/domínios existentes para Web Sites da Windows Azure, sem que o website fique fora do ar. Suporte a Deployment (Implantação) contínua com Git e CodePlex ou GitHub Um dos recursos mais populares que lançamos no início deste verão foi o suporte para a publicação de sites diretamente para a Windows Azure usando sistemas de controle de código como TFS e Git. Esse recurso fornece uma maneira muito poderosa para gerenciar as implantações/instalações da aplicação usando controle de código. É realmente fácil ativar este recurso através da página do dashboard de um web site: A opção TFS que lançamos no início deste verão oferece uma solução de implantação contínua muito rica que permite automatizar os builds e a execução de testes unitários a cada vez que você atualizar o repositório do seu website, e em seguida, se os testes forem bem sucedidos, a aplicação é automaticamente publicada/implantada na Windows Azure. Com o lançamento de hoje, estamos expandindo nosso suporte Git para também permitir cenários de implantação contínua integrando esse suporte com projetos hospedados no CodePlex e no GitHub. Este suporte está habilitado para todos os web-sites (incluindo os que usam o modo "free" (gratuito)). A partir de hoje, quando você escolher o link "Set up Git publishing" (Configurar publicação Git) na página do dashboard de um website, você verá duas opções adicionais quando a publicação baseada em Git estiver habilitada para o web-site: Você pode clicar em qualquer um dos links "Deploy from my CodePlex project" (Implantar a partir do meu projeto no CodePlex) ou "Deploy from my GitHub project" (Implantar a partir do meu projeto no GitHub) para seguir um simples passo a passo para configurar uma conexão entre o seu website e um repositório de código que você hospeda no CodePlex ou no GitHub. Uma vez que essa conexão é estabelecida, o CodePlex ou o GitHub automaticamente notificará a Windows Azure a cada vez que um checkin ocorrer. Isso fará com que a Windows Azure faça o download do código e compile/implante a nova versão da sua aplicação automaticamente. Os dois vídeos a seguir (em Inglês) mostram quão fácil é permitir esse fluxo de trabalho ao implantar uma app inicial e logo em seguida fazer uma alteração na mesma: Habilitando Implantação Contínua com os Websites da Windows Azure e CodePlex (2 minutos) Habilitando Implantação Contínua com os Websites da Windows Azure e GitHub (2 minutos) Esta abordagem permite um fluxo de trabalho de implantação contínua realmente limpo, e torna muito mais fácil suportar um ambiente de desenvolvimento em equipe usando Git: Nota: o lançamento de hoje suporta estabelecer conexões com repositórios públicos do GitHub/CodePlex. Suporte para repositórios privados será habitado em poucas semanas. Suporte para Múltiplos Branches (Ramos de Desenvolvimento) Anteriormente, nós somente suportávamos implantar o código que estava localizado no branch 'master' do repositório Git. Muitas vezes, porém, os desenvolvedores querem implantar a partir de branches alternativos (por exemplo, um branch de teste ou um branch com uma versão futura da aplicação). Este é agora um cenário suportado - tanto com projetos locais baseados no git, bem como com projetos ligados ao CodePlex ou GitHub. Isto permite uma variedade de cenários úteis. Por exemplo, agora você pode ter dois web-sites - um em "produção" e um outro para "testes" - ambos ligados ao mesmo repositório no CodePlex ou no GitHub. Você pode configurar um dos websites de forma que ele sempre baixe o que estiver presente no branch master, e que o outro website sempre baixe o que estiver no branch de testes. Isto permite uma maneira muito limpa para habilitar o teste final de seu site antes que ele entre em produção. Este vídeo de 1 minuto (em Inglês) demonstra como configurar qual branch usar com um web-site. Resumo Os recursos mostrados acima estão agora ao vivo em produção e disponíveis para uso imediato. Se você ainda não tem uma conta da Windows Azure, você pode inscrever-se em um teste gratuito para começar a usar estes recursos hoje mesmo. Visite o O Centro de Desenvolvedores da Windows Azure (em Inglês) para saber mais sobre como criar aplicações para serem usadas na nuvem. Nós teremos ainda mais novos recursos e melhorias chegando nas próximas semanas - incluindo suporte para os recentes lançamentos do Windows Server 2012 e .NET 4.5 (habilitaremos novas imagens de web e work roles com o Windows Server 2012 e NET 4.5 no próximo mês). Fique de olho no meu blog para detalhes assim que esses novos recursos ficarem disponíveis. Espero que ajude, - Scott P.S. Além do blog, eu também estou utilizando o Twitter para atualizações rápidas e para compartilhar links. Siga-me em: twitter.com/ScottGu Texto traduzido do post original por Leniel Macaferi.

Read the article

Quick guide to Oracle IRM 11g: Server installation

- by Simon Thorpe

Quick guide to Oracle IRM 11g index This is the first of a set of articles designed to assist with the successful installation, configuration and deployment of a document security solution using Oracle IRM. This article goes through a set of simple instructions which detail how to download, install and configure the IRM server, the starting point for building a document security solution. This article contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Downloading the software Preparing a database Creating the schema WebLogic Server installation Installing Oracle IRM Introduction Because we are using Oracle Enterprise Linux in this guide, and before we get into the detail of IRM, i'd like to share some tips with Linux to make life a bit easier.Use a 64bit platform, IRM 11g runs just fine on a 32bit server but with 64bit you will build a more future proof service. Download and install the latest Java JDK package. Make sure you get the 64bit version if you are on a 64bit server. Configure Linux to use a good Yum server to simplify installing packages. For Oracle Enterprise Linux we maintain a great public Yum here. Have at least 20GB of free disk space on the partition you intend to install the IRM server. The downloads are big, then you extract them and then install. This quickly consumes disk space which you can easily recover by deleting the downloaded and extracted files after wards. But it's nice to have the disk space spare to keep these around in case you need to restart any part of the installation process again. Downloading the software OK, so before you can do anything, you need the software install kits. Luckily Oracle allows you to freely download every technology we create. You'll need to get the following; Oracle WebLogic Server Oracle Database Oracle Repository Creation Utility (rcu) Oracle IRM server You can use Microsoft SQL server 2005 or 2008, in this guide i've used Oracle RDBMS 11gR2 for Linux. Preparing the database I'm not going to go through the finer points of installing the database. There are many very good guides on installing the Oracle Database. However one thing I would suggest you think about is enabling TDE, network encryption and using Database Vault. These Oracle database security technologies are excellent for creating a complete end to end security solution. No point in going to all the effort to secure document access with IRM when someone can go directly to the database and assign themselves rights to documents. To understand this further, you can see a video of the IRM service using these database security technologies here. With a database up and running we need to create a schema to hold the IRM data. This schema contains the rights model, cryptographic keys, user account id's and associated rights etc. Creating the IRM database schema Oracle uses the Repository Creation Tool which builds your schema, extract the files from the rcu zip. Then in a terminal window; cd /oracle/install/rcu/bin ./rcu This will launch the Repository Creation Tool and you will be presented with the image to the right. Hit next and continue onto the next dialog. You are asked if you are going to be creating a new schema or wish to drop an existing one, you obviously just need to click next at this point to create a new schema. The RCU next needs to know where your database is so you'll need the following details of your database instance. Below, for reference, is the information for my installation. Hostname: irm.oracle.demo Port: 1521 (This is the default TCP port for the Oracle Database) Service Name: irm.oracle.demo. Note this is not the SID, but the service name. Username: sys Password: ******** Role: SYSDBA And then select next. Because the RCU contains schemas for many of the Oracle Technologies, you now need to select to just deploy the Oracle IRM schema. Open the section under "Enterprise Content Management" and tick the "Oracle Information Rights Management" component. Note that you also get the chance to select a prefix which defaults to "DEV" (for development). I usually change this to something that reflects my own install. PROD for a production system, INT for internal only etc. The next step asks for the passwords for the schema users. We are only creating one schema here so you just enter one password. Some brave souls store this password in an Excel spreadsheet which is then secure against the IRM server you're about to install in this guide. Nearing the end of the schema creation is the mapping of the tablespaces to the schema. Note I had setup a table space already that was encrypted using TDE and at this point I was able to select that tablespace by clicking in the "Default Tablespace" column. The next dialog confirms your actions and clicking on next causes it to create the schema and default data. After this you are presented with the completion summary. WebLogic Server installation The database is now ready and the next step is to install the application server. Oracle IRM 11g is a JEE application and currently only supported in Oracle WebLogic Server. So the next step is get WebLogic Server installed, which is pretty easy. Depending on the version you download, you either run the binary or for a 64 bit platform (like mine) run the following command. java -d64 -jar wls1033_generic.jar And in the resulting dialog hit next to start walking through the install. Next choose a directory into which you will install WebLogic Server. I like to change from the default and install into /oracle/. Then all my software goes into this one folder, all owned by the "oracle" user. The next dialog asks for your Oracle support information to ensure you are kept up to date. If you have an Oracle support account, enter your details but for most evaluation systems I leave these fields blank. Again, for evaluation or development systems, I usually stick with the "Typical" install type which you are next asked for. Next you are asked for the JDK which will be used for the server. When installing from the generic jar on a 64bit platform like in this guide, no JDK is bundled with the installer. But as you can see in the image on the right, that it does a good job of detecting the one you've got installed. Defaults for the install directories are usually taken, no changes here, just click next. And finally we are ready to install, hit next, sit back and relax. Typically this takes about 10 minutes. After the install, do not run the quick start, we need to deploy the IRM install itself from which we will create a new WebLogic domain. For now just hit done and lets move to the final step of the installation process. Installing Oracle IRM The last piece of the puzzle to getting your environment ready is to deploy the IRM files themselves. Unzip the Oracle Enterprise Content Management 11g zip file and it will create a Disk1 directory. Switch to this folder and in the console run ./runInstaller. This will launch the installer which will also ask for the location of the JDK. Look at the image on the right for the detail. You should now see the first stage of the IRM installation. The dialog warns you need to have a WebLogic server installed and have created the schema's, but you've just done all that above (I hope) so we are ready to go. The installer now checks that you have all the required libraries installed and other system parameters are correct. Because nearly all of my development and evaluation installations have the database server on the same system, the installer passes these checks without issue... Next... Now chose where to install the IRM files, you must install into the same Middleware Home as the WebLogic Server installation you just performed. Usually the installer already defaults to this location anyway. I also tend to change the Oracle Home Directory to Oracle_IRM so it's clear this is just an IRM install. The summary page tells you about space needed to deploy the files. Unfortunately the IRM install comes with all of the other Oracle ECM software, you can't just select the IRM files, everything gets deployed to disk and uses 1.6GB of space! Not fun, but Oracle has to package up similar technologies otherwise we would have a very large number of installers to QA and manage, again, not fun. Hit Install, time for another drink, maybe a piece of cake or a donut... on a half decent system this part of the install took under 10 minutes. Finally the installation of your IRM server is complete, click on finish and the next phase is to create the WebLogic domain and start configuring your server. Now move onto the next article in this guide... configuring your IRM server ready to seal your first document.

Read the article

Lightning talk: Coderetreat

- by Michael Williamson

In the spirit of trying to encourage more deliberate practice amongst coders in Red Gate, Lauri Pesonen had the idea of running a coderetreat in Red Gate. Lauri and I ran the first one a few weeks ago: given that neither of us hadn’t even been to a coderetreat before, let alone run one, I think it turned out quite well. The participants gave positive feedback, saying that they enjoyed the day, wrote some thought-provoking code and would do it again. Sam Blackburn was one of the attendees, and gave a lightning talk to the other developers in one of our regular lightning talk sessions: In case you can’t watch the video, I’ve transcribed the talk below, although I’d recommend watching the video if you can — I didn’t have much time to do the transcribing! So, what is a coderetreat? So it’s not just something in Red Gate, there’s a website and everything, although it’s not a very big website. It calls itself a community network. The basic ideas behind coderetreat are: you’ve got one day, and you split it into one hour sections. You spend three quarters of that coding, and do a little retrospective at the end. You’re supposed to start fresh each, we were told to delete our code after every session. We were in pairs, swapping after each session, and we did the same task every time. In fact, Conway’s Game of Life is the only task mentioned anywhere that I find for coderetreat. So I don’t know what we’ll do next time, or if we’re meant to do the same thing again. There are some guiding principles which felt to us like restrictions, that you have to code in crazy ways to encourage better code. Final thing is that it’s supposed to be free for outsiders to join. It’s meant to be a kind of networking thing, where you link up with people from other companies. We had a pilot day with Michael and Lauri. Since it was basically the first time any of us had done anything like this, everybody was from Red Gate. We didn’t chat to anybody else for the initial one. The task was Conway’s Game of Life, which most of you have probably heard of it, all but one of us knew about it when did the coderetreat. I won’t got into the details of what it is, but it felt like the right size of task, basically one or two groups actually produced something working by the end of the day, and of course that doesn’t mean it’s necessarily a day’s work to produce that because we were starting again every hour. The task really drives you more than trying to create good code, I found. It was really tempting to try and get it working rather than stick to the rules. But it’s really good to stop and try again because there are so many what-ifs when you’ve finished writing something, “what if I’d done it this way?”. You can answer all those questions at a coderetreat because it’s not about getting a product out the door, it’s about learning and playing with ideas. So we had all these different practices we were trying. I’ll try and go through most of these. Single responsibility is this idea that everything should do just one thing. It was the very first session, we were still trying to figure out how do you go about the Game of Life? So by the end of forty-five minutes hadn’t produced very much for that first session. We were still thinking, “Do we start with a board, how do we represent all these squares? It can be infinitely big, help, this is getting really difficult!”. So, most of us didn’t really get anywhere on the first one. Although it was interesting that some people started with the board, one group started with the FateDecider class that decides whether things live or die. A sort of god class, but in a good way. They managed to implement all of the rules without even defining how the squares were arranged or anything like that. Another thing we tried was TDD (test-driven development). I’m sure most of you know what TDD is: Watch a test, watch it fail for the right reason Write code to pass the test, watch it pass Refactor, check the test still passes Repeat! It basically worked, we were able to produce code, but we often found the tests defined the direction that code went, which is obviously the idea of TDD. But you tend to find that by the time you’ve even written your first assertion, which is supposed to be the very first thing you write, because you write your tests backwards from the assertions back to the initial conditions, you’ve already constrained the logic of the code in some way by the time you’ve done that. You then get to this situation of, “Well, we actually want to go in a slightly different direction. Can we do this?”. Can we write tests that don’t constrain the architecture? Wrapping up all primitives: it’s kind of turtles all the way down. We had a Size, which has a Width and Height, which both derive from Dimension. You’ve got pages of code before you’ve even done anything. No getters and setters (use tell don’t ask instead): mocks and stubs for tests are required if you want to assert that your results are what you think they should be. You can’t just check the internal state of the code. And people found that really challenging and it made them think in a different way which I think is really good. Not having mutable state: that was kind of confusing because we weren’t quite sure what fitted within that rule and what didn’t, and I think we were trying too hard to follow the rule rather than the guideline. No if-statements: supposed to use polymorphism instead, but polymorphism still requires a factory with conditional behaviour. We did something really crazy to get around this: public T If(bool condition, Func<T> left, Func<T> right) { var dict = new Dictionary<bool, Func<T>> {{true, left}, {false, right}}; return dict[condition].Invoke(); } That is not really polymorphism, is it? For-loops: you can always replace a for-loop with recursion, but it doesn’t tend to make it any more readable unless it’s the kind of task that really lends itself to that. So it was interesting, it was good practice, but it wouldn’t make it easier it’s the kind of tree-structure algorithm where that would help. Having a limit on the number of levels of indentation: again, I think it does produce very nice, clean code, but it wasn’t actually a challenge because you just extract methods. That’s quite a useful thing because you can apply that to real code and say, “Okay, should this method really be going crazy like this?” No talking: we hated that. It’s like there’s two of you at a computer, and one of you is doing the typing, what does the other guy do if they’re not allowed to talk. The answer is TDD ping-pong – one person writes the tests, and then the other person writes the code to pass the test. And that creates communication without actually having to have discussion about things which is kind of cool. No code comments: just makes no difference to anything. It’s a forty-five minute exercise, so what are you going to put comments in code for? Finally, this is my fault. I discovered an entertaining way of doing the calculation that was kind of cool (using convolutions over the state of the board). Unfortunately, it turns out to be really hard to implement in C#, so didn’t even manage to work out how to do that convolution in C#. It’s trivial in some high-level languages, but you need something matrix-orientated for it to really work. That’s most of it, really. The thoughts that people went away with: we put down our answers to questions like “What have you learnt?” and “What surprised you?”, “How are you going to do things differently?”, and most people said redoing the problem is really, really good for understanding it properly. People hate having a massive legacy codebase that they can’t change, so being able to attack something three different ways in an environment where the end-product isn’t important: that’s something people really enjoyed. Pair-programming: also people said that they wanted to do more of that, especially with TDD ping-pong, where you write the test and somebody else writes the code. Various people thought different things about immutables, but most people thought they were good, they promote functional programming. And TDD people found really hard. “Tell, don’t ask” people found really, really hard and really, really, really hard to do well. And the recursion just made things trickier to debug. But most people agreed that coderetreats are really cool, and we should do more of them.

Read the article

In Which We Demystify A Few Docupresentment Settings And Learn the Ethos of the Author

- by Andy Little

It's no secret that Docupresentment (part of the Oracle Documaker suite) is powerful tool for integrating on-demand and interactive applications for publishing with the Oracle Documaker framework. It's also no secret there are are many details with respect to the configuration of Docupresentment that can elude even the most erudite of of techies. To be sure, Docupresentment will work for you right out of the box, and in most cases will suit your needs without toying with a configuration file. But, where's the adventure in that? With this inaugural post to That's The Way, I'm going to introduce myself, and what my aim is with this blog. If you didn't figure it out already by checking out my profile, my name is Andy and I've been with Oracle (nee Skywire Software nee Docucorp nee Formmaker) since the formative years of 1998. Strangely, it doesn't seem that long ago, but it's certainly a lifetime in the age of technology. I recall running a BBS from my parent's basement on a 1200 baud modem, and the trepidation and sweaty-palmed excitement of upgrading to the power and speed of 2400 baud! Fine, I'll admit that perhaps I'm inflating the experience a bit, but I was kid! This is the stuff of War Games and King's Quest I and the demise of TI-99 4/A. Exciting times. So fast-forward a bit and I'm 12 years into a career in the world of document automation and publishing working for the best (IMHO) software company on the planet. With That's The Way I hope to shed a little light and peek under the covers of some of the more interesting aspects of implementations involving the tech space within the Oracle Insurance Global Business Unit (IGBU), which includes Oracle Documaker, Rating & Underwriting, and Policy Administration to name a few. I may delve off course a bit, and you'll likely get a dose of humor (at least in my mind) but I hope you'll glean at least a tidbit of usefulness with each post. Feel free to comment as I'm a fairly conversant guy and happy to talk -- it's stopping the talking that's the hard part... So, back to our regularly-scheduled post, already in progress. By this time you've visited Oracle's E-Delivery site and acquired your properly-licensed version of Oracle Documaker. Wait -- you didn't find it? Understandable -- navigating the voluminous download library within Oracle can be a daunting task. It's pretty simple once you’ve done it a few times. Login to the e-delivery site, and accept the license terms and restrictions. Then, you’ll be able to select the Oracle Insurance Applications product pack and your appropriate platform. Click Go and you’ll see a list of applicable products, and you’ll click on Oracle Documaker Media Pack (as I went to press with this article the version is 11.4): Finally, click the Download button next to Docupresentment (again, version at press time is 2.2 p5). This should give you a ZIP file that contains the installation packages for the Docupresentment Server and Client, cryptically named IDSServer22P05W32.exe and IDSClient22P05W32.exe. At this time, I’d like to take a little detour and explain that the world of Oracle, like most technical companies, is rife with acronyms. One of the reasons Skywire Software was a appealing to Oracle was our use of many acronyms, including the occasional use of multiple acronyms with the same meaning. I apologize in advance and will try to point these out along the way. Here’s your first sticky note to go along with that: IDS = Internet Document Server = Docupresentment Once you’ve completed the installation, you’ll have a shiny new Docupresentment server and client, and if you installed the default location it will be living in c:\docserv. Unix users, I’m one of you! You’ll find it by default in ~/docupresentment/docserv. Forging onward with the meat of this post is learning about some special configuration options. By now you’ve read the documentation included with the download (specifically ids_book.pdf) which goes into some detail of the rubric of the configuration file and in fact there’s even a handy utility that provides an interface to the configuration file (see Running IDSConfig in the documentation). But who wants to deal with a configuration utility when we have the tools and technology to edit the file <gasp> by hand! I shall now proceed with the standard Information Technology Under the Hood Disclaimer: Please remember to back up any files before you make changes. I am not responsible for any havoc you may wreak! Go to your installation directory, and locate your docserv.xml file. Open it in your favorite XML editor. I happen to be fond of Notepad++ with the XML Tools plugin. Almost immediately you will behold the splendor of the configuration file. Just take a moment and let that sink in. Ok – moving on. If you reviewed the documentation you know that inside the root <configuration> node there are multiple <section> nodes, each containing a specific group of settings. Let’s take a look at <section name=”DocumentServer”>: There are a few entries I’d like to discuss. First, <entry name=”StartCommand”>. This should be pretty self-explanatory; it’s the name of the executable that’s run when you fire up Docupresentment. Immediately following that is <entry name=”StartArguments”> and as you might imagine these are the arguments passed to the executable. A few things to point out: The –Dids.configuration=docserv.xml parameter specifies the name of your configuration file. The –Dlogging.configuration=logconf.xml parameter specifies the name of your logging configuration file (this uses log4j so bone up on that before you delve here). The -Djava.endorsed.dirs=lib/endorsed parameter specifies the path where 3rd party Java libraries can be located for use with Docupresentment. More on that in another post. The <entry name=”Instances”> allows you to specify the number of instances of Docupresentment that will be started. By default this is two, and generally two instances per CPU is adequate, however you will always need to perform load testing to determine the sweet spot based on your hardware and types of transactions. You may have many, many more instances than 2. Time for a sidebar on instances. An instance is nothing more than a separate process of Docupresentment. The Docupresentment service that you fire up with docserver.bat or docserver.sh actually starts a watchdog process, which is then responsible for starting up the actual Docupresentment processes. Each of these act independently from one another, so if one crashes, it does not affect any others. In the case of a crashed process, the watchdog will start up another instance so the number of configured instances are always running. Bottom line: instance = Docupresentment process. And now, finally, to the settings which gave me pause on an not-too-long-ago implementation! Docupresentment includes a feature that watches configuration files (such as docserv.xml and logconf.xml) and will automatically restart its instances to load the changes. You can configure the time that Docupresentment waits to check these files using the setting <entry name=”FileWatchTimeMillis”>. By default the number is 12000ms, or 12 seconds. You can save yourself a few CPU cycles by extending this time, or by disabling the check altogether by setting the value to 0. This may or may not be appropriate for your environment; if you have 100% uptime requirements then you probably don’t want to bring down an entire set of processes just to accept a new configuration value, so it’s best to leave this somewhere between 12 seconds to a few minutes. Another point to keep in mind: if you are using Documaker real-time processing under Docupresentment the Master Resource Library (MRL) files and INI options are cached, and if you need to affect a change, you’ll have to “restart” Docupresentment. Touching the docserv.xml file is an easy way to do this (other methods including using the RSS request, but that’s another post). The next item up: <entry name=”FilePurgeTimeSeconds”>. You may already know that the Docupresentment system can generate many temporary files based on certain request types that are processed through the system. What you may not know is how those files are cleaned up. There are many rules in Docupresentment that cause the creation of temporary files. When these files are created, Docupresentment writes an entry into a properties file called the file cache. This file contains the name, creation date, and expiration time of each temporary file created by each instance of Docupresentment. Periodically Docupresentment will check the file cache to determine if there are files that are past the expiration time, not unlike that block of cheese festering away in the back of my refrigerator. However, unlike my ‘fridge cleaning tendencies, Docupresentment is quick to remove files that are past their expiration time. You, my friend, have the power to control how often Docupresentment inspects the file cache. Simply set the value for <entry name=”FilePurgeTimeSeconds”> to the number of seconds appropriate for your requirements and you’re set. Note that file purging happens on a separate thread from normal request processing, so this shouldn’t interfere with response times unless the CPU happens to be really taxed at the point of cache processing. Finally, after all of this, we get to the final setting I’m going to address in this post: <entry name=”FilePurgeList”>. The default is “filecache.properties”. This establishes the root name for the Docupresentment file cache that I mentioned previously. Docupresentment creates a separate cache file for each instance based on this setting. If you have two instances, you’ll see two files created: filecache.properties.1 and filecache.properties.2. Feel free to open these up and check them out. I hope you’ve enjoyed this first foray into the configuration file of Docupresentment. If you did enjoy it, feel free to drop a comment, I welcome feedback. If you have ideas for other posts you’d like to see, please do let me know. You can reach me at [email protected]. ‘Til next time! ###

Read the article

CodePlex Daily Summary for Saturday, May 22, 2010

CodePlex Daily Summary for Saturday, May 22, 2010New ProjectsDocument Toolkit Extensions: Document Toolkit Extensions provide a variety of samples, document converters and helpers for Document Toolkit, a fast, feature-rich and 100% clien...dream: dreamEnhanced Web Controls: The Enhanced Web Control Library Contains web controls that enhance the functionality of the microsoft input controls. New functionality includes l...Europe Engulfed: Europe Engulfed is a PC version of the classic GMT board war game of the same name simulating World War II in the European theater. It is develope...eXpress Persistent Objects (XPO) Toolkit: eXpress Persistent Objects (XPO) Toolkit provides extensions to the DevExpress Object-Relational Mapping Suite.FBGraph.NET: Write apps for Facebook's Graph API using .NET. Includes support for C#, VB.NET, ASP.NET WebForms and ASP.NET MVC.HugeFlow.OOB: Silverlight OOB Library It supports useful custom controls. WindowChrome, InstallScreen. LivePad: LivePad, It can be used to record your life journey. LivePad，可以用来记录您的人生历程。Management listings: The project is management adsMerthin: Merthin is an F# based Framework which boundaries are not defined yet. For now a bit of linear algebra.Mobile Exchange: Mobile Exchange is a .NET Compact Framework library and sample application for accessing the Stack Exchange API available on sites like Stack Overf...PC/SC Micro: PC/SC Micro is an API and a library. The API is a subset of the PC/SC Lite API and allows a .NET Micro Framework application to communicate with ...SerialPortLogger: SerialPortLogger is a simple monitoring application which montors the serial port and outputs to a database.SharePoint NNTP List Sync: Syncronizes NNTP groups with SharePoint lists and offers post/reply capability. Sets item date as post date and attempts to lookup user in local d...Simple Help System: Simple Help System (SHS) je jednoduchý nápovědný systém jak pro vývojáře tak pro obyčejné lidi. Vyvýjeno v C#.SoulHackers Demon Unite(Chinese version): SoulHackers Demon Unite calculate program, for Chinese version on PlayStationTPager: Mercurial pager with color support on WindowsWork Item Query Administration: Work Item Query Administration (wiqadmin) is command-line utility to manage work item queries in Team Foundation Server. For any TeamProject you ca...XPlatformCPP: A cross platform C++ rendering API, that uses either OpenGL 2.1 or Direct3D 9.0c as a backend. Works with Win32API (Windows), Xlib (Linux,etc...), ...Xshell: Xshell is a replacement for the Windows Explorer shell designed for Media Center/Home Theater PCs.عبر السـدم: عبر السدم هي لعبة ثلاثية الأبعاد من إنجاز أعضاء الشبكة العربية لمطوري الألعاب بالاعتماد على تقنية XNA. http://www.agdn-online.com http://www.ag...New ReleasesAzure Publish-Subscribe: Azure Pub-Sub Developer Manual v0.1: Very early alpha of the documentation. It's an early look at the architecture only.Chaow Framework: Chaow Framework V1.00: Project Description Chaow Framework is the set of class libraries designed for enhancing standard .NET framework. It allows you to write more simpl...Document Toolkit Extensions: Document Toolkit Extensions Beta 1: The first public beta release of Document Toolkit and Document Toolkit Extensions.DotNetNuke Russian Language packs: Core Russian Language Pack for DNN 05.04.02: Core Russian Language Pack for DNN 05.04.02 Добавлены несколько ресурсов из новой редакции... Исправлены ошибки и описки.DynamicJson: Release 1.2.0.0: Fix - Deserialize(cast) can't convert to dynamic[] Fix - Deserialize(cast) throw exception if has getonly propertyEnhanced Web Controls: Enhanced Web Controls: This download includes the Enhanced Web Control Library DLL. Also inlcuded is the most recently tested version of the Ajax Control Toolkit, you may...Europe Engulfed: Europe Engulfed: This is the first release for the Codeplex-based project. It includes all source code changes up to and including Change Set 50762. To use: copy ...Extend SmallBasic: Teaching Extensions v.017: added a quiz for spiderweb recipeFree Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.1.0 Released: Hi, This release contains the following enhancements: Mouse events for TrendLine have been implemented. You can go through Visifire documentation...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.3 Released: Hi, This release contains the following enhancements: Mouse events for TrendLine have been implemented. You can go through Visifire documentation...GreedyRSS: GreedyRSS 2.1: SuchSofts GreedyRSS平台整体更新至2.1版，重写了大量代码，可见还不够成熟稳定。此外还有以下几点主要更新：增加一个辅助类Settings，参见http://semify.spaces.live.com/blog/cns!7CB96C25969B3811!2345.entry...HugeFlow.OOB: HugeFlow.OOB 0.9 Beta for SL4: First release!NLog - Advanced .NET Logging: Nightly Build 2010.05.21.001: Changes since the last build:2010-05-20 23:20:17 Jarek Kowalski added tests for CsvLayout, refactored TargetWithLayoutHeaderAndFooter 2010-05-20 2...patterns & practices SharePoint Guidance: SPG 2010 Drop11: SharePoint Guidance Drop Notes Microsoft patterns and practices What's in this Drop: Docs/CHM ** *DropLocation\CHM\SharePointGuidance.chm ...Persian Date/Time support for MsSQL: Build 59 (STABLE): Removed CreateDateTimeWmS() ! Use public static PersianDateTime CreateDateTime(int year, int month, int day, int hour, int min, int sec) instead. ...PiPiBugNet: 增加了创建新Bug界面: 增加了创建新Bug界面，尚未编写代码Rule 18 - Love your clipboard: Rule 18 (Beta version): This is the beta of the next release for Rule 18. Use if you feel comfortable with software that has minimal real world testing applied. Current...Scrum Sprint Monitor: v1.0.0.48591: What is new in this release? #6132 - Bug with open work hours; Added support for MSF for Agile process template; Improved data reporting in the...sGSHOPedit: sGSHOPedit v1.0 (Alpha): -SharePoint NNTP List Sync: 1.0 Release: You may need to change the posting server within the layouts, it is hard coded A webpart wsp is not provided because you should customize the sou...Silverlight Report Library: Version 2.0: - Upgraded to Silverlight 4.0 RTW - ReportHeader control added which is templateable - PagePrinting and PagePrinted events added - PageBreak ad...Snoop, the WPF Spy Utility: Snoop 2.5.1: This is a minor bug fix release for Snoop. In particular, I have fixed the installers so that they create separately named shortcuts ... for each ...SoulHackers Demon Unite(Chinese version): WCFTestClient: This program is using WCF and .NET 4.0. This version is include unite 2 and unite 3 and check what can unite. Element unite is not included yet.SqlServerExtensions: V 0.1 beta: Version 0.1 BetaStackOverflow.Net: StackOverflow.Net for Silverlight public beta: The beta version of StackOverflow.Net for silverlight 4StackOverflow.Net: StackOverflow.Net for Windows Phone 7 public beta: The Windows Phone 7 version of StackOverflow.netStackOverflow.Net: StackOverflow.Net public beta: A public beta to go along with with the public beta of the Stack Exchange APIStyleCop+: StyleCop+ 0.8: Added new extended rule for SA1502. SP1502 has an option which allows constructors to be placed on a single line.SynthExport: SynthExport 1.1.0: Added support for extraction of camera parameters The number of images in coordinate systems is now shown Added status label Improved user ex...TPager: TPager-20100521: First releaseVCC: Latest build, v2.1.30521.0: Automatic drop of latest buildWcfDoc: 1.0.5: Targeting .NET 4.0.Work Item Query Administration: 1.0: This is the first release an contains the following commands: list import export rename deleteMost Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesASP.NETMost Active ProjectsRawrpatterns & practices – Enterprise Librarypatterns & practices: Windows Azure Security GuidanceCaliburn: An Application Framework for WPF and SilverlightSQL Server PowerShell ExtensionsGMap.NET - Great Maps for Windows Forms & PresentationBlogEngine.NETCodeReviewNB_Store - Free DotNetNuke Ecommerce Catalog ModulePHPExcel

Read the article

Using Table-Valued Parameters With SQL Server Reporting Services

- by Jesse

In my last post I talked about using table-valued parameters to pass a list of integer values to a stored procedure without resorting to using comma-delimited strings and parsing out each value into a TABLE variable. In this post I’ll extend the “Customer Transaction Summary” report example to see how we might leverage this same stored procedure from within an SQL Server Reporting Services (SSRS) report. I’ve worked with SSRS off and on for the past several years and have generally found it to be a very useful tool for building nice-looking reports for end users quickly and easily. That said, I’ve been frustrated by SSRS from time to time when seemingly simple things are difficult to accomplish or simply not supported at all. I thought that using table-valued parameters from within a SSRS report would be simple, but unfortunately I was wrong. Customer Transaction Summary Example Let’s take the “Customer Transaction Summary” report example from the last post and try to plug that same stored procedure into an SSRS report. Our report will have three parameters: Start Date – beginning of the date range for which the report will summarize customer transactions End Date – end of the date range for which the report will summarize customer transactions Customer Ids – One or more customer Ids representing the customers that will be included in the report The simplest way to get started with this report will be to create a new dataset and point it at our Customer Transaction Summary report stored procedure (note that I’m using SSRS 2012 in the screenshots below, but there should be little to no difference with SSRS 2008): When you initially create this dataset the SSRS designer will try to invoke the stored procedure to determine what the parameters and output fields are for you automatically. As part of this process the following dialog pops-up: Obviously I can’t use this dialog to specify a value for the ‘@customerIds’ parameter since it is of the IntegerListTableType user-defined type that we created in the last post. Unfortunately this really throws the SSRS designer for a loop, and regardless of what combination of Data Type, Pass Null Value, or Parameter Value I used here, I kept getting this error dialog with the message, "Operand type clash: nvarchar is incompatible with IntegerListTableType". This error message makes some sense considering that the nvarchar type is indeed incompatible with the IntegerListTableType, but there’s little clue given as to how to remedy the situation. I don’t know for sure, but I think that behind-the-scenes the SSRS designer is trying to give the @customerIds parameter an nvarchar-typed SqlParameter which is causing the issue. When I first saw this error I figured that this might just be a limitation of the dataset designer and that I’d be able to work around the issue by manually defining the parameters. I know that there are some special steps that need to be taken when invoking a stored procedure with a table-valued parameter from ADO .NET, so I figured that I might be able to use some custom code embedded in the report to create a SqlParameter instance with the needed properties and value to make this work, but the “Operand type clash" error message persisted. The Text Query Approach Just because we’re using a stored procedure to create the dataset for this report doesn’t mean that we can’t use the ‘Text’ Query Type option and construct an EXEC statement that will invoke the stored procedure. In order for this to work properly the EXEC statement will also need to declare and populate an IntegerListTableType variable to pass into the stored procedure. Before I go any further I want to make one point clear: this is a really ugly hack and it makes me cringe to do it. Simply put, I strongly feel that it should not be this difficult to use a table-valued parameter with SSRS. With that said, let’s take a look at what we’ll have to do to make this work. Manually Define Parameters First, we’ll need to manually define the parameters for report by right-clicking on the ‘Parameters’ folder in the ‘Report Data’ window. We’ll need to define the ‘@startDate’ and ‘@endDate’ as simple date parameters. We’ll also create a parameter called ‘@customerIds’ that will be a mutli-valued Integer parameter: In the ‘Available Values’ tab we’ll point this parameter at a simple dataset that just returns the CustomerId and CustomerName of each row in the Customers table of the database or manually define a handful of Customer Id values to make available when the report runs. Once we have these parameters properly defined we can take another crack at creating the dataset that will invoke the ‘rpt_CustomerTransactionSummary’ stored procedure. This time we’ll choose the ‘Text’ query type option and put the following into the ‘Query’ text area: 1: exec('declare @customerIdList IntegerListTableType ' + @customerIdInserts + 2: ' EXEC rpt_CustomerTransactionSummary 3: @startDate=''' + @startDate + ''', 4: @endDate='''+ @endDate + ''', 5: @customerIds=@customerIdList') By using the ‘Text’ query type we can enter any arbitrary SQL that we we want to and then use parameters and string concatenation to inject pieces of that query at run time. It can be a bit tricky to parse this out at first glance, but from the SSRS designer’s point of view this query defines three parameters: @customerIdInserts – This will be a Text parameter that we use to define INSERT statements that will populate the @customerIdList variable that is being declared in the SQL. This parameter won’t actually ever get passed into the stored procedure. I’ll go into how this will work in a bit. @startDate – This is a simple date parameter that will get passed through directly into the @startDate parameter of the stored procedure on line 3. @endDate – This is another simple data parameter that will get passed through into the @endDate parameter of the stored procedure on line 4. At this point the dataset designer will be able to correctly parse the query and should even be able to detect the fields that the stored procedure will return without needing to specify any values for query when prompted to. Once the dataset has been correctly defined we’ll have a @customerIdInserts parameter listed in the ‘Parameters’ tab of the dataset designer. We need to define an expression for this parameter that will take the values selected by the user for the ‘@customerIds’ parameter that we defined earlier and convert them into INSERT statements that will populate the @customerIdList variable that we defined in our Text query. In order to do this we’ll need to add some custom code to our report using the ‘Report Properties’ dialog: Any custom code defined in the Report Properties dialog gets embedded into the .rdl of the report itself and (unfortunately) must be written in VB .NET. Note that you can also add references to custom .NET assemblies (which could be written in any language), but that’s outside the scope of this post so we’ll stick with the “quick and dirty” VB .NET approach for now. Here’s the VB .NET code (note that any embedded code that you add here must be defined in a static/shared function, though you can define as many functions as you want): 1: Public Shared Function BuildIntegerListInserts(ByVal variableName As String, ByVal paramValues As Object()) As String 2: Dim insertStatements As New System.Text.StringBuilder() 3: For Each paramValue As Object In paramValues 4: insertStatements.AppendLine(String.Format("INSERT {0} VALUES ({1})", variableName, paramValue)) 5: Next 6: Return insertStatements.ToString() 7: End Function This method takes a variable name and an array of objects. We use an array of objects here because that is how SSRS will pass us the values that were selected by the user at run-time. The method uses a StringBuilder to construct INSERT statements that will insert each value from the object array into the provided variable name. Once this method has been defined in the custom code for the report we can go back into the dataset designer’s Parameters tab and update the expression for the ‘@customerIdInserts’ parameter by clicking on the button with the “function” symbol that appears to the right of the parameter value. We’ll set the expression to: 1: =Code.BuildIntegerListInserts("@customerIdList ", Parameters!customerIds.Value) In order to invoke our custom code method we simply need to invoke “Code.<method name>” and pass in any needed parameters. The first parameter needs to match the name of the IntegerListTableType variable that we used in the EXEC statement of our query. The second parameter will come from the Value property of the ‘@customerIds’ parameter (this evaluates to an object array at run time). Finally, we’ll need to edit the properties of the ‘@customerIdInserts’ parameter on the report to mark it as a nullable internal parameter so that users aren’t prompted to provide a value for it when running the report. Limitations And Final Thoughts When I first started looking into the text query approach described above I wondered if there might be an upper limit to the size of the string that can be used to run a report. Obviously, the size of the actual query could increase pretty dramatically if you have a parameter that has a lot of potential values or you need to support several different table-valued parameters in the same query. I tested the example Customer Transaction Summary report with 1000 selected customers without any issue, but your mileage may vary depending on how much data you might need to pass into your query. If you think that the text query hack is a lot of work just to use a table-valued parameter, I agree! I think that it should be a lot easier than this to use a table-valued parameter from within SSRS, but so far I haven’t found a better way. It might be possible to create some custom .NET code that could build the EXEC statement for a given set of parameters automatically, but exploring that will have to wait for another post. For now, unless there’s a really compelling reason or requirement to use table-valued parameters from SSRS reports I would probably stick with the tried and true “join-multi-valued-parameter-to-CSV-and-split-in-the-query” approach for using mutli-valued parameters in a stored procedure.

Read the article

Click Once Deployment Process and Issue Resolution

- by Geordie

Introduction We are adopting Click Once as a deployment standard for Thick .Net application clients. The latest version of this tool has matured it to a point where it can be used in an enterprise environment. This guide will identify how to use Click Once deployment and promote code trough the dev, test and production environments. Why Use Click Once over SCCM If we already use SCCM why add Click Once to the deployment options. The advantages of Click Once are their ability to update the code in a single location and have the update flow automatically down to the user community. There have been challenges in the past with getting configuration updates to download but these can now be achieved. With SCCM you can do the same thing but it then needs to be packages and pushed out to users. Each time a new user is added to an application, time needs to be spent by an administrator, to push out any required application packages. With Click Once the user would go to a web link and the application and pre requisites will automatically get installed. New Deployment Steps Overview The deployment in an enterprise environment includes several steps as the solution moves through the development life cycle before being released into production. To make mitigate risk during the release phase, it is important to ensure the solution is not deployed directly into production from the development tools. Although this is the easiest path, it can introduce untested code into production and result in unexpected results. 1. Deploy the client application to a development web server using Visual Studio 2008 Click Once deployment tools. Once potential production versions of the solution are being generated, ensure the production install URL is specified when deploying code from Visual Studio. (For details see ‘Deploying Click Once Code from Visual Studio’) 2. xCopy the code to the test server. Run the MageUI tool to update the URLs, signing and version numbers to match the test server. (For details see ‘Moving Click Once Code to a new Server without using Visual Studio’) 3. xCopy the code to the production server. Run the MageUI tool to update the URLs, signing and version numbers to match the production server. The certificate used to sign the code should be provided by a certificate authority that will be trusted by the client machines. Finally make sure the setup.exe contains the production install URL. If not redeploy the solution from Visual Studio to the dev environment specifying the production install URL. Then xcopy the install.exe file from dev to production. (For details see ‘Moving Click Once Code to a new Server without using Visual Studio’) Detailed Deployment Steps Deploying Click Once Code From Visual Studio Open Visual Studio and create a new WinForms or WPF project. In the solution explorer right click on the project and select ‘Publish’ in the context menu. The ‘Publish Wizard’ will start. Enter the development deployment path. This could be a local directory or web site. When first publishing the solution set this to a development web site and Visual basic will create a site with an install.htm page. Click Next. Select weather the application will be available both online and offline. Then click Finish. Once the initial deployment is completed, republish the solution this time mapping to the directory that holds the code that was just published. This time the Publish Wizard contains and additional option. The setup.exe file that is created has the install URL hardcoded in it. It is this screen that allows you to specify the URL to use. At some point a setup.exe file must be generated for production. Enter the production URL and deploy the solution to the dev folder. This file can then be saved for latter use in deployment to production. During development this URL should be pointing to development site to avoid accidently installing the production application. Visual studio will publish the application to the desired location in the process it will create an anonymous ‘pfx’ certificate to sign the deployment configuration files. A production certificate should be acquired in preparation for deployment to production. Directory structure created by Visual Studio Application files created by Visual Studio Development web site (install.htm) created by Visual Studio Migrating Click Once Code to a new Server without using Visual Studio To migrate the Click Once application code to a new server, a tool called MageUI is needed to modify the .application and .manifest files. The MageUI tool is usually located – ‘C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bin’ folder or can be downloaded from the web. When deploying to a new environment copy all files in the project folder to the new server. In this case the ‘ClickOnceSample’ folder and contents. The old application versions can be deleted, in this case ‘ClickOnceSample_1_0_0_0’ and ‘ClickOnceSample_1_0_0_1’. Open IIS Manager and create a virtual directory that points to the project folder. Also make the publish.htm the default web page. Run the ManeUI tool and then open the .application file in the root project folder (in this case in the ‘ClickOnceSample’ folder). Click on the Deployment Options in the left hand list and update the URL to the new server URL and save the changes. When MageUI tries to save the file it will prompt for the file to be signed. This step cannot be bypassed if you want the Click Once deployment to work from a web site. The easiest solution to this for test is to use the auto generated certificate that Visual Studio created for the project. This certificate can be found with the project source code. To save time go to File>Preferences and configure the ‘Use default signing certificate’ fields. Future deployments will only require application files to be transferred to the new server. The only difference is then updating the .application file the ‘Version’ must be updated to match the new version and the ‘Application Reference’ has to be update to point to the new .manifest file. Updating the Configuration File of a Click Once Deployment Package without using Visual Studio When an update to the configuration file is required, modifying the ClickOnceSample.exe.config.deploy file will not result in current users getting the new configurations. We do not want to go back to Visual Studio and generate a new version as this might introduce unexpected code changes. A new version of the application can be created by copying the folder (in this case ClickOnceSample_1_0_0_2) and pasting it into the application Files directory. Rename the directory ‘ClickOnceSample_1_0_0_3’. In the new folder open the configuration file in notepad and make the configuration changes. Run MageUI and open the manifest file in the newly copied directory (ClickOnceSample_1_0_0_3). Edit the manifest version to reflect the newly copied files (in this case 1.0.0.3). Then save the file. Open the .application file in the root folder. Again update the version to 1.0.0.3. Since the file has not changed the Deployment Options/Start Location URL should still be correct. The application Reference needs to be updated to point to the new versions .manifest file. Save the file. Next time a user runs the application the new version of the configuration file will be down loaded. It is worth noting that there are 2 different types of configuration parameter; application and user. With Click Once deployment the difference is significant. When an application is downloaded the configuration file is also brought down to the client machine. The developer may have written code to update the user parameters in the application. As a result each time a new version of the application is down loaded the user parameters are at risk of being overwritten. With Click Once deployment the system knows if the user parameters are still the default values. If they are they will be overwritten with the new default values in the configuration file. If they have been updated by the user, they will not be overwritten. Settings configuration view in Visual Studio Production Deployment When deploying the code to production it is prudent to disable the development and test deployment sites. This will allow errors such as incorrect URL to be quickly identified in the initial testing after deployment. If the sites are active there is no way to know if the application was downloaded from the production deployment and not redirected to test or dev. Troubleshooting Clicking the install button on the install.htm page fails. Error: URLDownloadToCacheFile failed with HRESULT '-2146697210' Error: An error occurred trying to download <file> This is due to the setup.exe file pointing to the wrong location. ‘The setup.exe file that is created has the install URL hardcoded in it. It is this screen that allows you to specify the URL to use. At some point a setup.exe file must be generated for production. Enter the production URL and deploy the solution to the dev folder. This file can then be saved for latter use in deployment to production. During development this URL should be pointing to development site to avoid accidently installing the production application.’

Read the article

Commit in SQL

- by PRajkumar

SQL Transaction Control Language Commands (TCL) (COMMIT) Commit Transaction As a SQL language we use transaction control language very frequently. Committing a transaction means making permanent the changes performed by the SQL statements within the transaction. A transaction is a sequence of SQL statements that Oracle Database treats as a single unit. This statement also erases all save points in the transaction and releases transaction locks. Oracle Database issues an implicit COMMIT before and after any data definition language (DDL) statement. Oracle recommends that you explicitly end every transaction in your application programs with a COMMIT or ROLLBACK statement, including the last transaction, before disconnecting from Oracle Database. If you do not explicitly commit the transaction and the program terminates abnormally, then the last uncommitted transaction is automatically rolled back. Until you commit a transaction: · You can see any changes you have made during the transaction by querying the modified tables, but other users cannot see the changes. After you commit the transaction, the changes are visible to other users' statements that execute after the commit · You can roll back (undo) any changes made during the transaction with the ROLLBACK statement Note: Most of the people think that when we type commit data or changes of what you have made has been written to data files, but this is wrong when you type commit it means that you are saying that your job has been completed and respective verification will be done by oracle engine that means it checks whether your transaction achieved consistency when it finds ok it sends a commit message to the user from log buffer but not from data buffer, so after writing data in log buffer it insists data buffer to write data in to data files, this is how it works. Before a transaction that modifies data is committed, the following has occurred: · Oracle has generated undo information. The undo information contains the old data values changed by the SQL statements of the transaction · Oracle has generated redo log entries in the redo log buffer of the System Global Area (SGA). The redo log record contains the change to the data block and the change to the rollback block. These changes may go to disk before a transaction is committed · The changes have been made to the database buffers of the SGA. These changes may go to disk before a transaction is committed Note: The data changes for a committed transaction, stored in the database buffers of the SGA, are not necessarily written immediately to the data files by the database writer (DBWn) background process. This writing takes place when it is most efficient for the database to do so. It can happen before the transaction commits or, alternatively, it can happen some times after the transaction commits. When a transaction is committed, the following occurs: 1. The internal transaction table for the associated undo table space records that the transaction has committed, and the corresponding unique system change number (SCN) of the transaction is assigned and recorded in the table 2. The log writer process (LGWR) writes redo log entries in the SGA's redo log buffers to the redo log file. It also writes the transaction's SCN to the redo log file. This atomic event constitutes the commit of the transaction 3. Oracle releases locks held on rows and tables 4. Oracle marks the transaction complete Note: The default behavior is for LGWR to write redo to the online redo log files synchronously and for transactions to wait for the redo to go to disk before returning a commit to the user. However, for lower transaction commit latency application developers can specify that redo be written asynchronously and that transaction do not need to wait for the redo to be on disk. The syntax of Commit Statement is COMMIT [WORK] [COMMENT ‘your comment’]; · WORK is optional. The WORK keyword is supported for compliance with standard SQL. The statements COMMIT and COMMIT WORK are equivalent. Examples Committing an Insert INSERT INTO table_name VALUES (val1, val2); COMMIT WORK; · COMMENT Comment is also optional. This clause is supported for backward compatibility. Oracle recommends that you used named transactions instead of commit comments. Specify a comment to be associated with the current transaction. The 'text' is a quoted literal of up to 255 bytes that Oracle Database stores in the data dictionary view DBA_2PC_PENDING along with the transaction ID if a distributed transaction becomes in doubt. This comment can help you diagnose the failure of a distributed transaction. Examples The following statement commits the current transaction and associates a comment with it: COMMIT COMMENT 'In-doubt transaction Code 36, Call (415) 555-2637'; · WRITE Clause Use this clause to specify the priority with which the redo information generated by the commit operation is written to the redo log. This clause can improve performance by reducing latency, thus eliminating the wait for an I/O to the redo log. Use this clause to improve response time in environments with stringent response time requirements where the following conditions apply: The volume of update transactions is large, requiring that the redo log be written to disk frequently. The application can tolerate the loss of an asynchronously committed transaction. The latency contributed by waiting for the redo log write to occur contributes significantly to overall response time. You can specify the WAIT | NOWAIT and IMMEDIATE | BATCH clauses in any order. Examples To commit the same insert operation and instruct the database to buffer the change to the redo log, without initiating disk I/O, use the following COMMIT statement: COMMIT WRITE BATCH; Note: If you omit this clause, then the behavior of the commit operation is controlled by the COMMIT_WRITE initialization parameter, if it has been set. The default value of the parameter is the same as the default for this clause. Therefore, if the parameter has not been set and you omit this clause, then commit records are written to disk before control is returned to the user. WAIT | NOWAIT Use these clauses to specify when control returns to the user. The WAIT parameter ensures that the commit will return only after the corresponding redo is persistent in the online redo log. Whether in BATCH or IMMEDIATE mode, when the client receives a successful return from this COMMIT statement, the transaction has been committed to durable media. A crash occurring after a successful write to the log can prevent the success message from returning to the client. In this case the client cannot tell whether or not the transaction committed. The NOWAIT parameter causes the commit to return to the client whether or not the write to the redo log has completed. This behavior can increase transaction throughput. With the WAIT parameter, if the commit message is received, then you can be sure that no data has been lost. Caution: With NOWAIT, a crash occurring after the commit message is received, but before the redo log record(s) are written, can falsely indicate to a transaction that its changes are persistent. If you omit this clause, then the transaction commits with the WAIT behavior. IMMEDIATE | BATCH Use these clauses to specify when the redo is written to the log. The IMMEDIATE parameter causes the log writer process (LGWR) to write the transaction's redo information to the log. This operation option forces a disk I/O, so it can reduce transaction throughput. The BATCH parameter causes the redo to be buffered to the redo log, along with other concurrently executing transactions. When sufficient redo information is collected, a disk write of the redo log is initiated. This behavior is called "group commit", as redo for multiple transactions is written to the log in a single I/O operation. If you omit this clause, then the transaction commits with the IMMEDIATE behavior. · FORCE Clause Use this clause to manually commit an in-doubt distributed transaction or a corrupt transaction. · In a distributed database system, the FORCE string [, integer] clause lets you manually commit an in-doubt distributed transaction. The transaction is identified by the 'string' containing its local or global transaction ID. To find the IDs of such transactions, query the data dictionary view DBA_2PC_PENDING. You can use integer to specifically assign the transaction a system change number (SCN). If you omit integer, then the transaction is committed using the current SCN. · The FORCE CORRUPT_XID 'string' clause lets you manually commit a single corrupt transaction, where string is the ID of the corrupt transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to specify this clause. · Specify FORCE CORRUPT_XID_ALL to manually commit all corrupt transactions. You must have DBA privileges to specify this clause. Examples Forcing an in doubt transaction. Example The following statement manually commits a hypothetical in-doubt distributed transaction. Query the V$CORRUPT_XID_LIST data dictionary view to find the transaction IDs of corrupt transactions. You must have DBA privileges to view the V$CORRUPT_XID_LIST and to issue this statement. COMMIT FORCE '22.57.53';

Search Results

Search found 28762 results on 1151 pages for 'go goo go'.

Page 195/1151 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202 | Next Page >

- by Ben

- by KallDrexx

- by user1325655

- by Ricket

- by J. Pablo Fernández

- by mseika

- by SQLOS Team

- by JuergenKress

- by SQLOS Team

- by pinaldave

- by Matthew Guay

- by DigitalGeekery

- by JuergenKress

- by dwahlin

- by Manesh Karunakaran

- by Leniel Macaferi

- by Simon Thorpe

- by Michael Williamson

- by Andy Little

- by Jesse

- by Geordie

- by PRajkumar

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202 | Next Page >