Search Results

Search found 5597 results on 224 pages for 'sudo rm rf'.

Page 195/224 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• Why can't I view a directory in Linux?

  - by Thread7

  I am setting up a Linux web server running apache. I uploaded and untared my web sites files. The files in the main directory are all visible when I am SSH'd into the system. However, I am blocked from all subdirectories. If I write: # cd images Then I get the error: -bash: cd: images: Permission denied I am signed in as ec2-user. I untarred the stuff as ec2-user and I doubt there was any permissions in the tar file since I created the archive on a Windows system. The weird thing is that I am the owner of this directory. Here is a snippet of the command: ls -l drw-rw-r-- 19 ec2-user ec2-user 4096 May 4 04:09 images When I do "sudo su" and then type the command cd images everything is fine. Why do I get "Permission denied" as ec2-user if I am the owner and have rw permission?

  Read the article

• Cannot Start Nginx Compiled from Source

  - by Jason Alan Kennedy

  I am trying to compile Nginx from source based on the original compiled Nginx server running on my DigitalOcean server ( Ubuntu-14.04 64x ) but with a few extra modules. I can get everything installed smoothly but I can not get it to start. I am sure the ini is correct because I copied the original source off the current running Nginx server [ Even though I see that Nginx now adds the ini when compiling fron source ]. Below is the [ lengthy process ] that I am performing - add sorry but I wanted to be thorough for those who are in need of the info ]. Because I am a newB to Nginx, I am sure I am missing something or just have it all wrong. If you may look over what I have done and see if you spot anything I need/need to change, I will greatly appreciate it. Thnx! With the original Nginx server still running: I check the current/running Nginx configuration so I can build the new Nginx instance the same but with the added modules: nginx -V # The out-put: configure arguments: --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' --prefix=/usr/share/nginx --conf-path=/etc/nginx/nginx.conf --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log --lock-path=/var/lock/nginx.lock --pid-path=/run/nginx.pid --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --with-debug --with-pcre-jit --with-ipv6 --with-http_ssl_module --with-http_stub_status_module --with-http_realip_module --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_spdy_module --with-http_sub_module --with-http_xslt_module NOTE: The configure arguments below return errors during 'make' so I removed them. I don't know what they are - could this be related to my issue??? --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' Moving on: # So I don't have to sudo every line: sudo bash # Check for updates first thing: apt-get update # Install various prerequisites needed to compile Nginx: apt-get install build-essential libgd2-xpm-dev lsb-base zlib1g-dev libpcre3 libpcre3-dev libbz2-dev libxslt1-dev libxml2 libssl-dev libgeoip-dev tar unzip openssl # Create System users [ if it doesn't exist - but I see its there on DigitalOceans' Droplets all-ready ]: adduser --system --no-create-home --disabled-login --disabled-password --group www-data # Download NGINX wget http://nginx.org/download/nginx-1.7.4.tar.gz tar -xvzf nginx-1.7.4.tar.gz # Then Google PageSpeed: wget https://github.com/pagespeed/ngx_pagespeed/archive/release-1.8.31.4-beta.zip unzip release-1.8.31.4-beta.zip # cd into the PageSpeed Directory cd ngx_pagespeed-release-1.8.31.4-beta/ # and add the PSOL files in there: wget https://dl.google.com/dl/page-speed/psol/1.8.31.4.tar.gz tar -xzvf 1.8.31.4.tar.gz # Get back to the root directory: cd # I add the ngx_cache_purge module and will install the Nginx Helper plugin for WP later: wget https://github.com/FRiCKLE/ngx_cache_purge/archive/2.1.zip unzip 2.1.zip # Add the headers-more-nginx-module: wget https://github.com/openresty/headers-more-nginx-module/archive/v0.25.zip unzip v0.25.zip # and the naxsi module for added security: wget https://github.com/nbs-system/naxsi/archive/0.53-2.tar.gz tar -xvzf 0.53-2.tar.gz # cd to the new Nginx directory cd nginx-1.7.4 # Set up the configuration build based on the current running Nginx config args and add my additional modules: ./configure \ --add-module=$HOME/naxsi-0.53-2/naxsi_src \ --prefix=/usr/share/nginx \ --conf-path=/etc/nginx/nginx.conf \ --http-log-path=/var/log/nginx/access.log \ --error-log-path=/var/log/nginx/error.log \ --lock-path=/var/lock/nginx.lock \ --pid-path=/run/nginx.pid \ --http-client-body-temp-path=/var/lib/nginx/body \ --http-fastcgi-temp-path=/var/lib/nginx/fastcgi \ --http-proxy-temp-path=/var/lib/nginx/proxy \ --http-scgi-temp-path=/var/lib/nginx/scgi \ --http-uwsgi-temp-path=/var/lib/nginx/uwsgi \ --user=www-data \ --group=www-data \ --with-debug \ --with-pcre-jit \ --with-ipv6 \ --with-http_ssl_module \ --with-http_stub_status_module \ --with-http_realip_module \ --with-http_addition_module \ --with-http_dav_module \ --with-http_geoip_module \ --with-http_gzip_static_module \ --with-http_image_filter_module \ --with-http_spdy_module \ --with-http_sub_module \ --with-http_xslt_module \ --with-mail \ --with-mail_ssl_module \ --add-module=$HOME/ngx_pagespeed-release-1.8.31.4-beta \ --add-module=$HOME/ngx_cache_purge-2.1 \ --add-module=$HOME/headers-more-nginx-module-0.25 [ENTER] Configuration Summary: Configuration summary + using system PCRE library + using system OpenSSL library + md5: using OpenSSL library + sha1: using OpenSSL library + using system zlib library nginx path prefix: "/usr/share/nginx" nginx binary file: "/usr/share/nginx/sbin/nginx" nginx configuration prefix: "/etc/nginx" nginx configuration file: "/etc/nginx/nginx.conf" nginx pid file: "/run/nginx.pid" nginx error log file: "/var/log/nginx/error.log" nginx http access log file: "/var/log/nginx/access.log" nginx http client request body temporary files: "/var/lib/nginx/body" nginx http proxy temporary files: "/var/lib/nginx/proxy" nginx http fastcgi temporary files: "/var/lib/nginx/fastcgi" nginx http uwsgi temporary files: "/var/lib/nginx/uwsgi" nginx http scgi temporary files: "/var/lib/nginx/scgi" Next step: I cd to root and I check the old Nginx folder locations and double checked the 'make' output to see that they are the same: whereis nginx #Output: nginx: /usr/sbin/nginx /etc/nginx /usr/share/nginx NOTE: Not sure about the '/usr/sbin/nginx' - Possible issue??? Next I copy the old /etc/nginx/nginx.conf, /etc/nginx/sites-available/default, /etc/nginx/sites-enabled/default, /etc/init.d/nginx to a text file locally for safe keeping to use in the new Nginx server. Then stop the running Nginx server: service nginx stop , verify it's stopped: service --status-all and the output is: [ - ] nginx To verify that there are two Nginx directories, I cd to: cd nginx* and the output is an error indicating there are two nginx folders - Cool Beans! :) Now Install the new Nginx server: cd nginx-1.7.4 make install # INSTALL OUTPUT ######################################## make -f objs/Makefile install make[1]: Entering directory `/home/walkingfish/nginx-1.7.4' test -d '/usr/share/nginx' || mkdir -p '/usr/share/nginx' test -d '/usr/share/nginx/sbin' || mkdir -p '/usr/share/nginx/sbin' test ! -f '/usr/share/nginx/sbin/nginx' || mv '/usr/share/nginx/sbin/nginx' '/usr/share/nginx/sbin/nginx.old' cp objs/nginx '/usr/share/nginx/sbin/nginx' test -d '/etc/nginx' || mkdir -p '/etc/nginx' cp conf/koi-win '/etc/nginx' cp conf/koi-utf '/etc/nginx' cp conf/win-utf '/etc/nginx' test -f '/etc/nginx/mime.types' || cp conf/mime.types '/etc/nginx' cp conf/mime.types '/etc/nginx/mime.types.default' test -f '/etc/nginx/fastcgi_params' || cp conf/fastcgi_params '/etc/nginx' cp conf/fastcgi_params '/etc/nginx/fastcgi_params.default' test -f '/etc/nginx/fastcgi.conf' || cp conf/fastcgi.conf '/etc/nginx' cp conf/fastcgi.conf '/etc/nginx/fastcgi.conf.default' test -f '/etc/nginx/uwsgi_params' || cp conf/uwsgi_params '/etc/nginx' cp conf/uwsgi_params '/etc/nginx/uwsgi_params.default' test -f '/etc/nginx/scgi_params' || cp conf/scgi_params '/etc/nginx' cp conf/scgi_params '/etc/nginx/scgi_params.default' test -f '/etc/nginx/nginx.conf' || cp conf/nginx.conf '/etc/nginx/nginx.conf' cp conf/nginx.conf '/etc/nginx/nginx.conf.default' test -d '/run' || mkdir -p '/run' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' test -d '/usr/share/nginx/html' || cp -R html '/usr/share/nginx' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ######################################################### I copy/create the files that I saved earlier to txt files in sites-available, the config, default and ini files then symlink them to sites-enabled, and so on. And now to start the server: service nginx start And this is where s#!+ hits the fan - Nada. I check to see if Nginx is running with service --status-all and its not. Also with nginx -V and its not installed??? I reboot the system too and still nothing. So I am not sure what is wrong here. The ini was copied over from the old server along with all the other config files after deleting the old files. When I opened the new compiled files, the nginx default data was present so I replaced them with my old original data prior to starting the new server for the first time. Also to be safe, I rm /etc/nginx/sites-enabled/default and symlinked with ln -s /etc/nginx/sites-available/default /etc/nginx/sites-enabled/default with no errors and I verified that the data was in the sites-enabled/default file. I don't think the server really/fully installed because of the nginx -V result: The program 'nginx' can be found in the following packages: * nginx-core * nginx-extras * nginx-full * nginx-light * nginx-naxsi Try: apt-get install <selected package> Do/should I apt-get install nginx-1.7.4 ?? Or what package do I use being that its a custom package and make install earlier did nothing?? If you need to see the conf files I copied over from the old to the custom server, LMK and I'll post them. Again your help here would be appreciated!

  Read the article

• QLogic QLE8152 won't link up with a fiber loop

  - by Mike Pennington

  I have a Dell R710 running Debian Linux 6.0 (Squeeze). I installed a QLogic QLE8152 CNA in the PCI-E riser today and I have been trying to get the CNA's ethernet layer to come up after I put a fiber loop on it; I also scoped it with a light meter, and the SFP+ transceiver is getting the correct amount of light. The whole time I have been working on this problem, the lights on the CNA are blinking green at a rate of about 1 flash every 3 seconds. When I plug the fiber into a Juniper EX4500 10GE in a rack next to it, the Juniper's link stays down as well. I have to confess that this is my first wrangling with a CNA, so perhaps I'm doing something fundamentally wrong, but here is what I have found so far... First the basics... [mpenning@Finger ~]$ uname -a Linux Finger 2.6.32-5-amd64 #1 SMP Mon Oct 3 03:59:20 UTC 2011 x86_64 GNU/Linux [mpenning@Finger ~]$ cat /etc/issue Debian GNU/Linux 6.0 \n \l [mpenning@Finger ~]$ lspci -v shows that the card is properly installed (physically) 04:00.0 Ethernet controller: QLogic Corp. 10GbE Converged Network Adapter (TCP/IP Networking) (rev 02) Subsystem: QLogic Corp. Device 017e Flags: bus master, fast devsel, latency 0, IRQ 34 I/O ports at e000 [size=256] Memory at df8f0000 (64-bit, non-prefetchable) [size=16K] Memory at df900000 (64-bit, non-prefetchable) [size=1M] Expansion ROM at df800000 [disabled] [size=256K] Capabilities: [44] Power Management version 3 Capabilities: [4c] Express Endpoint, MSI 00 Capabilities: [88] MSI: Enable- Count=1/32 Maskable- 64bit+ Capabilities: [98] Vital Product Data Capabilities: [a0] MSI-X: Enable+ Count=8 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Device Serial Number 00-c0-dd-ff-fe-1c-53-b4 Capabilities: [144] Power Budgeting <?> Kernel driver in use: qlge The output from ethtool shows that eth4 is the QLE8152... [mpenning@Finger ~]$ sudo ethtool eth4 Settings for eth4: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: FIBRE PHYAD: 0 Transceiver: external Auto-negotiation: on Current message level: 0x000060f7 (24823) Link detected: no [mpenning@Finger ~]$ sudo ethtool -i eth4 driver: qlge version: v1.00.00-b3 firmware-version: v1.35.11 bus-info: 0000:04:00.0 [mpenning@Finger ~]$ Finally, I tried modprobe -r qlge; modprobe -r qla2xxx and then modprobe qla2xxx; modprobe qlge to kick the system again... I don't see a smoking gun in /var/log/messages... Nov 17 19:46:21 finger kernel: [ 6212.298275] qlge 0000:04:00.1: PCI INT B disabled Nov 17 19:46:22 finger kernel: [ 6213.779974] qlge 0000:04:00.0: PCI INT A disabled Nov 17 19:46:33 finger kernel: [ 6224.554074] qla2xxx 0000:04:00.3: PCI INT D disabled Nov 17 19:46:33 finger kernel: [ 6224.555322] qla2xxx 0000:04:00.2: PCI INT C disabled Nov 17 19:46:54 finger kernel: [ 6245.625854] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:54 finger kernel: [ 6245.625888] qla2xxx 0000:04:00.2: PCI INT C -> GSI 35 (level, low) -> IRQ 35 Nov 17 19:46:54 finger kernel: [ 6245.626837] qla2xxx 0000:04:00.2: MSI-X vector count: 7 Nov 17 19:46:54 finger kernel: [ 6245.626841] qla2xxx 0000:04:00.2: Found an ISP8001, irq 35, iobase 0xffffc90012664000 Nov 17 19:46:54 finger kernel: [ 6245.627113] qla2xxx 0000:04:00.2: Configuring PCI space... Nov 17 19:46:54 finger kernel: [ 6245.639429] qla2xxx 0000:04:00.2: Configure NVRAM parameters... Nov 17 19:46:54 finger kernel: [ 6245.642597] qla2xxx 0000:04:00.2: Verifying loaded RISC code... Nov 17 19:46:54 finger kernel: [ 6245.642708] qla2xxx 0000:04:00.2: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.273340] qla2xxx 0000:04:00.2: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.273401] qla2xxx 0000:04:00.2: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.273486] qla2xxx 0000:04:00.2: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.273856] scsi9 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.274631] qla2xxx 0000:04:00.2: Nov 17 19:46:55 finger kernel: [ 6246.274633] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.274634] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.274636] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.2 hdma+, host#=9, fw=5.01.04 (8d4) Nov 17 19:46:55 finger kernel: [ 6246.274666] qla2xxx 0000:04:00.3: PCI INT D -> GSI 37 (level, low) -> IRQ 37 Nov 17 19:46:55 finger kernel: [ 6246.274748] qla2xxx 0000:04:00.3: MSI-X vector count: 7 Nov 17 19:46:55 finger kernel: [ 6246.274751] qla2xxx 0000:04:00.3: Found an ISP8001, irq 37, iobase 0xffffc900125c4000 Nov 17 19:46:55 finger kernel: [ 6246.275098] qla2xxx 0000:04:00.3: Configuring PCI space... Nov 17 19:46:55 finger kernel: [ 6246.287329] qla2xxx 0000:04:00.3: Configure NVRAM parameters... Nov 17 19:46:55 finger kernel: [ 6246.290624] qla2xxx 0000:04:00.3: Verifying loaded RISC code... Nov 17 19:46:55 finger kernel: [ 6246.290736] qla2xxx 0000:04:00.3: FW: Loading from flash (a0000)... Nov 17 19:46:55 finger kernel: [ 6246.920204] qla2xxx 0000:04:00.3: Allocated (64 KB) for FCE... Nov 17 19:46:55 finger kernel: [ 6246.920264] qla2xxx 0000:04:00.3: Allocated (64 KB) for EFT... Nov 17 19:46:55 finger kernel: [ 6246.920345] qla2xxx 0000:04:00.3: Allocated (1350 KB) for firmware dump... Nov 17 19:46:55 finger kernel: [ 6246.920749] scsi10 : qla2xxx Nov 17 19:46:55 finger kernel: [ 6246.921715] qla2xxx 0000:04:00.3: Nov 17 19:46:55 finger kernel: [ 6246.921716] QLogic Fibre Channel HBA Driver: 8.03.01-k6 Nov 17 19:46:55 finger kernel: [ 6246.921717] QLogic QLE8152 - QLogic PCI-Express Dual Channel 10GbE CNA Nov 17 19:46:55 finger kernel: [ 6246.921719] ISP8001: PCIe (5.0GT/s x4) @ 0000:04:00.3 hdma+, host#=10, fw=5.01.04 (8d4) Nov 17 19:46:58 finger kernel: [ 6249.519911] qlge 0000:04:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 Nov 17 19:46:58 finger kernel: [ 6249.533970] qlge 0000:04:00.0: QLogic 10 Gigabit PCI-E Ethernet Driver Nov 17 19:46:58 finger kernel: [ 6249.533975] qlge 0000:04:00.0: Driver name: qlge, Version: v1.00.00-b3. Nov 17 19:46:58 finger kernel: [ 6249.534856] qlge 0000:04:00.0: ql_display_dev_info: Function #0, Port 0, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.534860] qlge 0000:04:00.0: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b4 Nov 17 19:46:58 finger kernel: [ 6249.534888] qlge 0000:04:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44 Nov 17 19:46:58 finger kernel: [ 6249.549109] qlge 0000:04:00.1: ql_display_dev_info: Function #1, Port 1, NIC Roll 0, NIC Rev = 1, XG Roll = 0, XG Rev = 1. Nov 17 19:46:58 finger kernel: [ 6249.549112] qlge 0000:04:00.1: ql_display_dev_info: MAC address 00:c0:dd:1c:53:b6 Any assistance getting a link up on this is greatly appreciated...

  Read the article

• PostgreSQL 8.4 won't start after blackout

  - by RiZe

  I have problem with starting PostgreSQL 8.4 on Ubuntu 9.10 Server after blackout. When I try to connect to the database it says: psql: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request. When I try to start it by using command sudo -u postgres /etc/init.d/postgresql-8.4 start * Starting PostgreSQL 8.4 database server [ OK ] Netstat output netstat -tulp (No info could be read for "-p": geteuid()=1000 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 localhost:postgresql *:* LISTEN - tcp 0 0 192.168.1.35:svn *:* LISTEN - tcp 0 0 192.168.1.35:http-alt *:* LISTEN - tcp 0 0 *:ssh *:* LISTEN - tcp6 0 0 localhost:postgresql [::]:* LISTEN - tcp6 0 0 [::]:ssh [::]:* LISTEN - udp 0 0 *:bootpc *:* - But still don't work so lets restart it sudo -u postgres /etc/init.d/postgresql-8.4 restart * Restarting PostgreSQL 8.4 database server * The PostgreSQL server failed to start. Please check the log output: 2009-11-30 13:39:37 CET LOG: database system was shut down at 2009-11-30 13:39:33 CET 2009-11-30 13:39:37 CET LOG: autovacuum launcher started 2009-11-30 13:39:37 CET LOG: database system is ready to accept connections 2009-11-30 13:39:37 CET LOG: incomplete startup packet 2009-11-30 13:39:38 CET LOG: server process (PID 2240) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:38 CET LOG: terminating any other active server processes 2009-11-30 13:39:38 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:38 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:37 CET 2009-11-30 13:39:38 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:38 CET LOG: record with zero length at 0/11D464C 2009-11-30 13:39:38 CET LOG: redo is not required 2009-11-30 13:39:38 CET LOG: autovacuum launcher started 2009-11-30 13:39:38 CET LOG: database system is ready to accept connections 2009-11-30 13:39:38 CET LOG: server process (PID 2248) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:38 CET LOG: terminating any other active server processes 2009-11-30 13:39:38 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:38 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:38 CET 2009-11-30 13:39:38 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:38 CET LOG: record with zero length at 0/11D4690 2009-11-30 13:39:38 CET LOG: redo is not required 2009-11-30 13:39:39 CET LOG: autovacuum launcher started 2009-11-30 13:39:39 CET LOG: database system is ready to accept connections 2009-11-30 13:39:39 CET LOG: server process (PID 2256) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:39 CET LOG: terminating any other active server processes 2009-11-30 13:39:39 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:39 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:38 CET 2009-11-30 13:39:39 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:39 CET LOG: record with zero length at 0/11D46D4 2009-11-30 13:39:39 CET LOG: redo is not required 2009-11-30 13:39:39 CET LOG: autovacuum launcher started 2009-11-30 13:39:39 CET LOG: database system is ready to accept connections 2009-11-30 13:39:39 CET LOG: server process (PID 2264) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:39 CET LOG: terminating any other active server processes 2009-11-30 13:39:39 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:39 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:39 CET 2009-11-30 13:39:39 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:40 CET LOG: record with zero length at 0/11D4718 2009-11-30 13:39:40 CET LOG: redo is not required 2009-11-30 13:39:40 CET LOG: autovacuum launcher started 2009-11-30 13:39:40 CET LOG: database system is ready to accept connections 2009-11-30 13:39:40 CET LOG: server process (PID 2272) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:40 CET LOG: terminating any other active server processes 2009-11-30 13:39:40 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:40 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:40 CET 2009-11-30 13:39:40 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:40 CET LOG: record with zero length at 0/11D475C 2009-11-30 13:39:40 CET LOG: redo is not required 2009-11-30 13:39:40 CET LOG: autovacuum launcher started 2009-11-30 13:39:40 CET LOG: database system is ready to accept connections 2009-11-30 13:39:41 CET LOG: server process (PID 2280) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:41 CET LOG: terminating any other active server processes 2009-11-30 13:39:41 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:41 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:40 CET 2009-11-30 13:39:41 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:41 CET LOG: record with zero length at 0/11D47A0 2009-11-30 13:39:41 CET LOG: redo is not required 2009-11-30 13:39:41 CET LOG: autovacuum launcher started 2009-11-30 13:39:41 CET LOG: database system is ready to accept connections 2009-11-30 13:39:41 CET LOG: server process (PID 2288) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:41 CET LOG: terminating any other active server processes 2009-11-30 13:39:41 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:41 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:41 CET 2009-11-30 13:39:41 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:41 CET LOG: record with zero length at 0/11D47E4 2009-11-30 13:39:41 CET LOG: redo is not required 2009-11-30 13:39:41 CET LOG: autovacuum launcher started 2009-11-30 13:39:41 CET LOG: database system is ready to accept connections 2009-11-30 13:39:42 CET LOG: server process (PID 2296) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:42 CET LOG: terminating any other active server processes 2009-11-30 13:39:42 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:42 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:41 CET 2009-11-30 13:39:42 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:42 CET LOG: record with zero length at 0/11D4828 2009-11-30 13:39:42 CET LOG: redo is not required 2009-11-30 13:39:42 CET LOG: autovacuum launcher started 2009-11-30 13:39:42 CET LOG: database system is ready to accept connections 2009-11-30 13:39:42 CET LOG: server process (PID 2304) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:42 CET LOG: terminating any other active server processes 2009-11-30 13:39:42 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:42 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:42 CET 2009-11-30 13:39:42 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:42 CET LOG: record with zero length at 0/11D486C 2009-11-30 13:39:42 CET LOG: redo is not required 2009-11-30 13:39:43 CET LOG: autovacuum launcher started 2009-11-30 13:39:43 CET LOG: database system is ready to accept connections 2009-11-30 13:39:43 CET LOG: server process (PID 2312) was terminated by signal 11: Segmentation fault 2009-11-30 13:39:43 CET LOG: terminating any other active server processes 2009-11-30 13:39:43 CET LOG: all server processes terminated; reinitializing 2009-11-30 13:39:43 CET LOG: database system was interrupted; last known up at 2009-11-30 13:39:42 CET 2009-11-30 13:39:43 CET LOG: database system was not properly shut down; automatic recovery in progress 2009-11-30 13:39:43 CET LOG: record with zero length at 0/11D48B0 2009-11-30 13:39:43 CET LOG: redo is not required 2009-11-30 13:39:43 CET LOG: autovacuum launcher started 2009-11-30 13:39:43 CET LOG: database system is ready to accept connections [fail] So what happened and what can I do to solve this? Thanks for replies

  Read the article

• Why doesn't pppd over ssh work here? Why can't I kill pppd?

  - by Peter V. Mørch

  I'm trying to setup a simple ppp tunnel over ssh. It works on several machines just fine. But on one machine, pppd gets "stuck": > pgrep pppd | xargs ps up USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 4178 0.0 0.1 3020 1088 pts/1 Ds+ 05:28 0:00 /usr/sbin/pppd Any attempt to kill it (even sudo kill -9 4178) has no effect that I can see. strace -p 4178 also hangs similarly. After it has been started for a while, I start getting messages in dmesg like shown below. It is started like so from another machine: ssh -t root@server /usr/sbin/pppd passive noauth When I do this to one of the machines that work, the remote end's pppd spits out garbage/binary data to the console (as expected). When I do it to the one that fails, I get no output from pppd, but the ssh session eventually times out. If I instead ssh to the machine, and then run /usr/sbin/pppd passive noauth in a separate step I also get the expected binary output. I now have a couple of questions: What could be up with the one machine where pppd fails? I don't even know where to start looking... What could be the difference between ssh -t root@server /usr/sbin/pppd passive noauth in a single step and ssh root@server and /usr/sbin/pppd passive noauth in two steps? How can it be that I can't kill the process even with sudo kill -9? The only way I know is to reboot. (I've tried searching for something similar but didn't get anywhere so I'm sorry I don't have any more leads) Any ideas? The problem machine runs in debian on VMware "hardware" (as do the ones that work) and it exhibits the problem when cloned and on both debian lenny (original) and squeeze (after upgrade) dmesg entries: [ 1198.727248] INFO: task pppd:4178 blocked for more than 120 seconds. [ 1198.727507] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1198.727904] pppd D ece2dc9c 0 4178 4174 0x00000004 [ 1198.727908] 00000098 00000082 f2503520 ece2dc9c 0000b1e7 00000000 c148d1c0 c148d1c0 [ 1198.727913] f2a06100 f6e071c0 00000000 ece2dc18 f5cd07e0 00000000 ece2d400 ece2dc9d [ 1198.727918] 00c52300 ece2dcbc f67bfef8 ec98e480 f291cec0 00000000 c10cf5b0 c10dfd21 [ 1198.727923] Call Trace: [ 1198.727926] [<c10cf5b0>] ? nameidata_to_filp+0x37/0x41 [ 1198.727929] [<c10dfd21>] ? dput+0x21/0xb7 [ 1198.727932] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1198.727935] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1198.727938] [<c11cb91b>] ? tty_ioctl+0x85f/0x8ba [ 1198.727941] [<c10fec18>] ? do_lock_file_wait+0x3d/0xd9 [ 1198.727944] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1198.727946] [<c11cb0bc>] ? tty_check_change+0xb9/0xb9 [ 1198.727949] [<c10dbeb7>] ? do_vfs_ioctl+0x485/0x4c7 [ 1198.727952] [<c10db59a>] ? do_fcntl+0x24f/0x3a2 [ 1198.727954] [<c10dbf3a>] ? sys_ioctl+0x41/0x58 [ 1198.727957] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28 [ 1318.457225] INFO: task sshd:4174 blocked for more than 120 seconds. [ 1318.457500] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1318.457896] sshd D f25024cc 0 4174 2393 0x00000000 [ 1318.457901] 00000098 00000086 f2a06940 f25024cc 0000b246 00000000 c148d1c0 c148d1c0 [ 1318.457906] f2503520 f6e071c0 00000000 3f056585 0000000f ece2d4bc 3f056585 f2503520 [ 1318.457911] ec98bb38 ec98bbdc 00000000 00000000 00000000 c12c09b5 f2503520 c10327cb [ 1318.457916] Call Trace: [ 1318.457926] [<c12c09b5>] ? schedule_hrtimeout_range_clock+0x3c/0xd9 [ 1318.457931] [<c10327cb>] ? try_to_wake_up+0x13f/0x13f [ 1318.457935] [<c11cfecc>] ? tty_ldisc_ref_wait+0x5f/0x76 [ 1318.457940] [<c104de7a>] ? wake_up_bit+0x5c/0x5c [ 1318.457943] [<c11c9ad3>] ? tty_poll+0x32/0x5e [ 1318.457947] [<c10dd4d5>] ? do_select+0x2a1/0x42e [ 1318.457950] [<c10dcb83>] ? poll_freewait+0x69/0x69 [ 1318.457953] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457955] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457958] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457960] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457963] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457965] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457968] [<c10dcc25>] ? __pollwait+0xa2/0xa2 [ 1318.457971] [<c10429c2>] ? lock_timer_base+0x19/0x35 [ 1318.457974] [<c1042eb5>] ? __mod_timer+0x10c/0x116 [ 1318.457977] [<c1042f89>] ? mod_timer+0x69/0x6e [ 1318.457981] [<c121325d>] ? sk_reset_timer+0xc/0x16 [ 1318.457984] [<c1252f57>] ? tcp_event_new_data_sent+0x66/0x6b [ 1318.457987] [<c1255b85>] ? tcp_write_xmit+0x7a7/0x86a [ 1318.457990] [<c121760d>] ? __alloc_skb+0x50/0xfd [ 1318.457994] [<c12c12bc>] ? _raw_spin_lock_bh+0x8/0x1e [ 1318.457996] [<c1212e98>] ? release_sock+0x10/0xc4 [ 1318.457999] [<c124b543>] ? tcp_sendmsg+0x6dd/0x7b7 [ 1318.458003] [<c1162c97>] ? _copy_from_user+0x2b/0x102 [ 1318.458006] [<c10dd7a0>] ? core_sys_select+0x13e/0x1c3 [ 1318.458009] [<c12102a3>] ? sock_aio_write+0xc0/0xd4 [ 1318.458012] [<c10d0655>] ? do_sync_write+0xa0/0xe4 [ 1318.458016] [<c10b141c>] ? handle_mm_fault+0x222/0x238 [ 1318.458019] [<c10f6096>] ? fsnotify+0x1de/0x1f9 [ 1318.458022] [<c10dd9e8>] ? sys_select+0x6e/0x8f [ 1318.458024] [<c10d105e>] ? sys_write+0x3c/0x63 [ 1318.458028] [<c12c6a1f>] ? sysenter_do_call+0x12/0x28

  Read the article

• qemu-kvm virtual machine virtio network freeze under load

  - by Rick Koshi

  I'm having a problem with my virtual machines, where the network will freeze under heavy load. I'm using CentOS 6.2 as both host and guest, not using libvirt, just running qemu-kvm directly as follows: /usr/libexec/qemu-kvm \ -drive file=/data2/vm/rb-dev2-www1-vm.img,index=0,media=disk,cache=none,if=virtio \ -boot order=c \ -m 2G \ -smp cores=1,threads=2 \ -vga std \ -name rb-dev2-www1-vm \ -vnc :84,password \ -net nic,vlan=0,macaddr=52:54:20:00:00:54,model=virtio \ -net tap,vlan=0,ifname=tap84,script=/etc/qemu-ifup \ -monitor unix:/var/run/vm/rb-dev2-www1-vm.mon,server,nowait \ -rtc base=utc \ -device piix3-usb-uhci \ -device usb-tablet /etc/qemu-ifup (used by the above command) is a very simple script, containing the following: #!/bin/sh sudo /sbin/ifconfig $1 0.0.0.0 promisc up sudo /usr/sbin/brctl addif br0 $1 sleep 2 And here's the info on br0 and other interfaces: avl-host3 14# brctl show bridge name bridge id STP enabled interfaces br0 8000.180373f5521a no bond0 tap84 virbr0 8000.525400858961 yes virbr0-nic avl-host3 15# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:1e brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:20 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 7: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet 172.16.1.46/24 brd 172.16.1.255 scope global br0 inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 8: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 9: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 500 link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff 12: tap84: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether ba:e8:9b:2a:ff:48 brd ff:ff:ff:ff:ff:ff inet6 fe80::b8e8:9bff:fe2a:ff48/64 scope link valid_lft forever preferred_lft forever bond0 is a bond of em1 and em2. virbr0 and virbr0-nic are vestigial interfaces left over from CentOS's default installation. They are unused (as far as I know). The guest runs perfectly until I run a large 'rsync', when the network will freeze after some seemingly-random time (usually under a minute). When it freezes, there is no network activity in or out of the guest. I can still connect to the guest's console via vnc, but it is unable to speak out its network interface. Any attempt to 'ping' from the guest gives a "Destination Host Unreachable" error for 3/4 packets and no reply for every fourth packet. Sometimes (perhaps two thirds of the time), I can bring the interface back to life by doing a "service network restart" from the guest's console. If this works (and if I do it before the rsync times out), the rsync will resume. Usually it will freeze again within a minute or two. If I repeat, the rsync will eventually finish, and I presume the machine goes back to waiting for another period of heavy load. Throughout the whole process, there are no console errors or relevant (that I can see) syslog messages on either guest or host machine. If the "service network restart" doesn't work the first time, trying again (and again and again) never seems to work. The command completes normally, with normal output, but the interface stays frozen. However, a soft reboot of the guest machine (without restarting qemu-kvm) always seems to bring it back. I am aware of the "lowest mac address" assignment problem, where the bridge takes on the mac address of the slave interface with the lowest mac address. This causes temporary network freezes, but is definitely not what's happening for me. My freezes are permanent until manual intervention, and you can see from the 'ip addr show' output above that the mac address being used by br0 is that of the physical ethernet. There are no other virtual machines running on the host. I've verified that each virtual machine on the subnet has its own unique mac address. I have rebuilt the guest machine several times, and I have tried this on three different host machines (identical hardware, built identically). Oddly, I do have one virtual host (the second of this series) which never seemed to have a problem. It never had its network freeze when it was running the same rsync during its build. It's particularly odd because it was the second build. The first, on a different host, did have the freezing problem, but the second did not. I assumed at the time that I had done something wrong with the first build, and that the problem was resolved. Unfortunately, the problem reappeared when I built the third VM. Also unfortunately, I can't do many tests with the working VM, as it's now in production use, and I'm hoping I can find the cause of this issue before that machine starts having problems. It's possible that I just got really lucky while running the rsync on the working machine, and that one time it didn't freeze. Of course it's possible that I somehow changed the build scripts without realizing it and re-broke something, but I can't find any such thing. In any case, I'm hoping someone has some idea what could cause this. Addendum: Preliminary tests suggest that I don't have the problem if I substitute e1000 for virtio in the first -net flag to qemu-kvm. I don't consider this a solution, but it is suitable for a stopgap. Has anyone else had (or better yet, solved) this problem with the virtio network driver?

  Read the article

• How can I block a specific type of DDoS attack?

  - by Mark

  My site is being attacked and is using up all the RAM. I looked at the Apache logs and every malicious hit seems to simply be a POST request on /, which is never required by a normal user. So I thought and wondered if there's any sort of solution or utility that will monitor my Apache logs and block every IP that performs a POST request on the site root. I'm not familiar with DDoS protection and searching didn't seem to give me an answer, so I came here. Thanks. Example logs: 103.3.221.202 - - [30/Sep/2012:16:02:03 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 122.72.80.100 - - [30/Sep/2012:16:02:03 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 122.72.28.15 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" 210.75.120.5 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Windows NT 6.1; rv:12.0) Gecko/20100101 Firefox/12.0" 122.96.59.103 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Linux; U; Android 2.2; fr-fr; Desire_A8181 Build/FRF91) App3leWebKit/53.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" 122.96.59.103 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Linux; U; Android 2.2; fr-fr; Desire_A8181 Build/FRF91) App3leWebKit/53.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" 122.72.124.3 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.112.148 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:13.0) Gecko/20100101 Firefox/13.0.1" 190.39.210.26 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.0" 302 485 "-" "Mozilla/5.0 (Windows NT 6.0; rv:13.0) Gecko/20100101 Firefox/13.0.1" 210.213.245.230 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.0" 302 485 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPhone; CPU iPhone OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 101.44.1.28 - - [30/Sep/2012:16:02:14 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 103.3.221.202 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 466 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 101.44.1.25 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPhone; CPU iPhone OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 211.161.152.108 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 211.161.152.106 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:5.0.1) Gecko/20100101 Firefox/5.0.1" 103.3.221.202 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 466 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6" 101.44.1.25 - - [30/Sep/2012:16:02:10 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 122.72.124.2 - - [30/Sep/2012:16:02:17 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.124.2 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.124.2 - - [30/Sep/2012:16:02:17 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 210.213.245.230 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.0" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" iptables -L: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination - bui@debian:~$ sudo iptables -I INPUT 1 -m string --algo bm --string 'Keep-Alive: 300' -j DROP iptables: No chain/target/match by that name. bui@debian:~$ sudo iptables -A INPUT -m string --algo bm --string 'Keep-Alive: 300' -j DROP iptables: No chain/target/match by that name.

  Read the article

• Exalogic 2.0.1 Tea Break Snippets - Creating a ModifyJeOS VirtualBox

  - by The Old Toxophilist

  Following on from my previous blog entry "Modifying the Base Template" I decided to put together a quick blog to show how to create a small VirtualBox, guest, that can be used to execute the ModifyJeOS and hence edit you templates. One of the main advantages of this is that Templates can be created away from the Exalogic Environment. For the Guest OS I chose OEL 6u3 and decided to create it as a basic server because I did not require a graphical interface but it's a simple change to create it with a GUI. Required Software Virtual Box. Oracle Enterprise Linux. Creating the VM I'll assume that the reader is experienced with Virtual Box and installing OEL and hence will make this section brief. Create VirtualBox Guest Create a new VirtualBox Guest and select oracle Linux 64 bit. Follow through the create process and select Dynamic Disk Size and the default 12GB disk size. The actual image will be a lot smaller than this but the OEL install will fail with insufficient disk space if you attempt a smaller size. Once the guest has been created attach the previously downloaded OEL 6u3 iso to the cd drive and start the guest. Install OEL On starting the guest the system will boot off the associated OEL 6u3 iso and take you through the standard installation process. Select all the appropriate information but when you reach the installation type select Basic Server because we do not need that additional packages and only need to access through the command line interface. Complete the installation and reboot the Guest. At this point we now have a basic OEL server running. Installing Guest Add-ons Before we can easily access the Guest we will need to add the VirtualBox guest add-ons. These will provide better keyboard and mouse integration and allow access the shared folders on the host machine. Before we can do this we will need to do the following: Enable Networking. Install additional rpms.  To enable the networking (eth0), that appears to be disabled by default, we can execute: ifup eth0 This will start the eth0 connection but once the Guest is rebooted the network will be down again. To resolve this you will need to edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file and change the ONBOOT parameter to "yes". Now we have enabled the network we will need to install a number of addition rpm. First we will need to configure the yum repository as follows: [ol6_latest] name=Oracle Linux $releasever Latest ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 [ol6_ga_base] name=Oracle Linux $releasever GA installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/0/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u1_base] name=Oracle Linux $releasever Update 1 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/1/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u2_base] name=Oracle Linux $releasever Update 2 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/2/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_u3_base] name=Oracle Linux $releasever Update 3 installation media copy ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/3/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 [ol6_UEK_latest] name=Latest Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/latest/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 [ol6_UEK_base] name=Unbreakable Enterprise Kernel for Oracle Linux $releasever ($basearch) baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/UEK/base/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=0 Once the repository has been edited we will need to execute the following yum commands: yum update yum install gcc yum install kernel-uek-devel yum install kernel-devel yum install createrepo At this point we now have all the additional packages required to install the VirtualBox Guest Add-ons. So select Devices->InstallGuest Additions on you running guest: This will simply place the VirtualBoxGuestAdditions.iso in the virtual cd and we will need to execute the following before we can run them. mkdir /media/cdrom mount -t iso9660 -o ro /dev/cdrom /media/cdrom cd /media/cdrom/ ls ./VBoxLinuxAdditions.run This will initiate the install and kernel rebuild. What you will notice is that during the installation a Failed will be displayed but this is simply because we have no graphical components. At this point we the installation will also have added the vboxsf group to the system and to access any shared folders we will create our user will need to be a member of this group an so the next stage is to add the root user to this group as follows: usermod -G vboxsf root cat /etc/group cat /etc/passwd init 0 Now simply shutdown the guest and add the Shared folder within your guests settings. Install ModifyJeOS Once the shared folder has been added restart the guest and change directory into the shared folder (/media/sf_<folder name>). For the next step I am assuming the ModifyJeOS rpms are located in the shared folder. We can simply execute: rpm -ivh ovm-modify-jeos-1.1.0-17.el5.noarch.rpm # Test with modifyjeos Using ModifyJeOS I have a modified MountSystemImg.sh script that should be copied into the /root/bin directory (you may need to create this) and from here it can be executed from any location: MountSystemImg.sh #!/bin/sh # The script assumes it's being run from the directory containing the System.img # Export for later i.e. during unmount export LOOP=`losetup -f` export SYSTEMIMG=/mnt/elsystem export TEMPLATEDIR=`pwd` # Make Temp Mount Directory mkdir -p $SYSTEMIMG # Create Loop for the System Image losetup $LOOP System.img kpartx -a $LOOP mount /dev/mapper/`basename $LOOP`p2 $SYSTEMIMG #Change Dir into mounted Image cd $SYSTEMIMG echo "######################################################################" echo "### ###" echo "### Starting Bash shell for editing. When completed log out to ###" echo "### Unmount the System.img file. ###" echo "### ###" echo "######################################################################" echo bash cd ~ cd $TEMPLATEDIR umount $SYSTEMIMG kpartx -d $LOOP losetup -d $LOOP rm -rf $SYSTEMIMG This script will simple create a mount directory, mount the System.img and then start a new shell in the mounted directory. On exiting the shell it will unmount the System.img. It only requires that you execute the script in the directory containing the System.img. These can be created under the mounted shared directory. In the example below I have extracted the Base template within the shared folder and then renamed it OEL_40GB_ROOT before changing into that directory and executing the script.

  Read the article

• Why is Git telling me "Your branch is ahead of 'origin/master' by 11 commits." and how do I get it t

  - by spilth

  I'm a Git newbie. I recently moved a Rails project from Subversion to Git. I followed the tutorial here: http://www.simplisticcomplexity.com/2008/03/05/cleanly-migrate-your-subversion-repository-to-a-git-repository/ I am also using unfuddle.com to store my code. I make changes on my Mac laptop on the train to/from work and then push them to unfuddle when I have a network connection using the following command: git push unfuddle master I use Capistrano for deployments and pull code from the unfuddle repository using the master branch. Lately I've noticed the following message when I run "git status" on my laptop: # On branch master # Your branch is ahead of 'origin/master' by 11 commits. # nothing to commit (working directory clean) And I'm confused as to why. I thought my laptop was the origin... but don't know if either the fact that I originally pulled from Subversion or push to Unfuddle is what's causing the message to show up. How can I: Find out where Git thinks 'origin/master' is? If it's somewhere else, how do I turn my laptop into the 'origin/master'? Get this message to go away. It makes me think Git is unhappy about something. My mac is running Git version 1.6.0.1. When I run git remote show origin as suggested by dbr, I get the following: ~/Projects/GeekFor/geekfor 10:47 AM $ git remote show origin fatal: '/Users/brian/Projects/GeekFor/gf/.git': unable to chdir or not a git archive fatal: The remote end hung up unexpectedly When I run git remote -v as suggested by Aristotle Pagaltzis, I get the following: ~/Projects/GeekFor/geekfor 10:33 AM $ git remote -v origin /Users/brian/Projects/GeekFor/gf/.git unfuddle [email protected]:spilth/geekfor.git Now, interestingly, I'm working on my project in the geekfor directory but it says my origin is my local machine in the gf directory. I believe gf was the temporary directory I used when converting my project from Subversion to Git and probably where I pushed to unfuddle from. Then I believe I checked out a fresh copy from unfuddle to the geekfor directory. So it looks like I should follow dbr's advice and do: git remote rm origin git remote add origin [email protected]:spilth/geekfor.git

  Read the article

• Default Database Collations got messed up

  - by dominicdinada

  I am using Ubuntu 9.10 with XAMPP ( Lampp "MYSQL 5.1.45 PHPMYADMIN 3.3.1 PHP 5.3.2 ) What my problem is, is that I set up my testing env to debug my scripts locally and when I did so there arose a problem. This problem is that I used firefox's addon SQLinject ME to test for weakness' and upon doing so it caused mysql to change the default local collations; character sets dir /opt/lampp/share/mysql/charsets/ collation connection latin1_general_ci (Global value) latin1_swedish_ci collation database latin1_swedish_ci collation server latin1_swedish_ci I have searched for quite sometime in regards to a solution to this problem and have come up with searching for the db.opt file which stores this information without success. Upon not finding a solution I removed lampp with the "sudo rm -fR /opt" command and reinstall and the problem still persists. I have tried to change the collations manually and still come up with the database displaying latin1_swedish_ci as the default language. Why is this a problem?? Why is it a problem with mysql? Because the application I am testing and debugging locally is built on the CodeIgnitor with Smarty framework and since this combination of framework is built to detect the LOCALES, Rather what the database defaults are I keep getting errors saying no language file for swedish...... Of course I could get the swedish language file to work around this problem but I do not feel the need to make this work around a perminant solution as with time when I move on to projects I will run into simular problems every time that A; When importing database files, backups etc it will default to import such databases as the locale swedish. B; As time passes on I might completly forget of this error and will be back to square one. I have found this code in searches for a fix,which seems to alter the tables to a desired Collaion; $value) { mysql_query("ALTER TABLE $value COLLATE latin1_general_ci"); }} echo "The collation of your database has been successfully changed!"; ? Which is handy to switch collations in One Schema at a time however this is not a fix when a framework doesnt care that the said database is in one langugae. It tests for the Default of the entire server. Someone with any knowledge of a purge or fix to this I would greatly appricate the help. One more final note is that when I was testing I only figured to back up the applications DataBase and not the entire Schema of the install. No matter if I uninstall or reinstall the database still seems to carry these problems.

  Read the article

• Trying to include a library, but keep getting 'undefined reference to' messages

  - by KU1

  I am attempting to use the libtommath library. I'm using the NetBeans IDE for my project on Ubuntu linux. I have downloaded and built the library, I have done a 'make install' to put the resulting .a file into /usr/lib/ and the .h files into /usr/include It appears to be finding the files appropriately (since I no longer get those errors, which I did before installing into the /usr directories). However, when I create a simple main making a call to mp_init (which is in the library), I get the following error when I attempt to make my project: mkdir -p build/Debug/GNU-Linux-x86 rm -f build/Debug/GNU-Linux-x86/main.o.d gcc -c -g -MMD -MP -MF build/Debug/GNU-Linux-x86/main.o.d -o build/Debug/GNU-Linux-x86/main.o main.c mkdir -p dist/Debug/GNU-Linux-x86 gcc -o dist/Debug/GNU-Linux-x86/cproj1 build/Debug/GNU-Linux-x86/main.o build/Debug/GNU-Linux-x86/main.o: In function 'main': /home/[[myusername]]/NetBeansProjects/CProj1/main.c:18: undefined reference to `mp_init' collect2: ld returned 1 exit status make[2]: *** [dist/Debug/GNU-Linux-x86/cproj1] Error 1 So, it looks like the linker can't find the function within the library, however it IS there, so I just don't know what could be causing this. Any help would be appreciated. I get the same error if I type the gcc command directly and skip the makefile, I also made sure the static library got compiled with gcc as well. Edited to Add: I get these same errors if I do the compile directly and add the library with -l or -L: $ gcc -l /usr/lib/libtommath.a main.c /usr/bin/ld: cannot find -l/usr/lib/libtommath.a collect2: ld returned 1 exit status $ gcc -llibtommath.a main.c /usr/bin/ld: cannot find -llibtommath.a collect2: ld returned 1 exit status $ gcc -Llibtommath.a main.c /tmp/ccOxzclw.o: In function `main': main.c:(.text+0x18): undefined reference to `mp_init' collect2: ld returned 1 exit status $ gcc -Llibtommath.a main.c /tmp/ccOxzclw.o: In function `main': main.c:(.text+0x18): undefined reference to `mp_init' collect2: ld returned 1 exit status I am very rusty on this stuff, so I'm not sure I'm using the right command here, in the -L examples are the libraries being found? If the library isn't being found how on earth do I get it to find the library? It's in /usr/lib, I've tried it with the .a file in the current directory, etc. Is there an environment variable I need to set? If so, how, etc. Thanks so much for the help. I've tried a completely different library (GMP) and had the EXACT same problem. This has got to be some kind of Ubuntu environment issue? Anyone have any idea how to fix this?

  Read the article

• Python, SWIG and other strange things

  - by wanderameise

  hey, I have a firmware for an USB module I can already control by visual C. Now I want to port this to python. for this I need the octopus library which is written in c. I found a file called octopus_wrap which was created by SWIG! then I found a makefile which says: python2.5: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.5 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so python2.4: swig -python -outdir ./ ../octopus.i gcc -fPIC -c ../../liboctopus/src/octopus.c gcc -fPIC -c ../octopus_wrap.c -I /usr/include/python2.4 gcc -fPIC -shared octopus_wrap.o octopus.o /usr/lib/libusb.so -o _octopus.so win: gcc -fPIC -c ../../liboctopus/src/octopus.c -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -c octopus_wrap.c -I /c/Python25/libs -lpython25 -I/c/Python25/include -I /c/Programme/libusb-win32-device-bin-0.1.10.1/include gcc -fPIC -shared *.o -o _octopus.pyd -L/c/Python25/libs -lpython25 -lusb -L/c/Programme/libusb-win32-device-bin-0.1.10.1/lib/gcc clean: rm -f octopus* _octopus* install_python2.4: cp _octopus.so /usr/local/lib/python2.4/site-packages/ cp octopus.py /usr/local/lib/python2.4/site-packages/ install_python2.5: cp _octopus.so /usr/local/lib/python2.5/site-packages/ cp octopus.py /usr/local/lib/python2.5/site-packages/ I dont know how to handle this but as far as I can see octopus.py and _octopus.so are the resulting output files which are relevant to python right? luckily someone already did that and so I put those 2 files to my "python26/lib" folder (hope it doesnt matter if it´s python 2.5 or 2.6?!) So when working with the USB device the octopus.py is the library to work with! Importing this file makes several problems: >>> Traceback (most recent call last): File "C:\Users\ameise\My Dropbox\µC\AVR\OCTOPUS\octopususb-0.5\demos\python \blink_status.py", line 8, in <module> from octopus import * File "C:\Python26\lib\octopus.py", line 7, in <module> import _octopus ImportError: DLL load failed: module not found. and here´s the related line 7 : import _octopus So there´s a problem considering the .so file! What could be my next step? I know that´s a lot of confusing stuff but I hope anyone of you could bring some light in my mind! thy in advance

  Read the article

• Handling file renames in git

  - by Greg K

  I'd read that when renaming files in git, you should commit any changes, perform your rename and then stage your renamed file. Git will recognise the file from the contents, rather than seeing it as a new untracked file, and keep the change history. However, doing just this tonight I ended up reverting to git mv. > $ git status # On branch master # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # modified: index.html # Rename my stylesheet in Finder from iphone.css to mobile.css > $ git status # On branch master # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # modified: index.html # # Changed but not updated: # (use "git add/rm <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # deleted: css/iphone.css # # Untracked files: # (use "git add <file>..." to include in what will be committed) # # css/mobile.css So git now thinks I've deleted one CSS file, and added a new one. Not what I want, lets undo the rename and let git do the work. > $ git reset HEAD . Unstaged changes after reset: M css/iphone.css M index.html Back to where I began. > $ git status # On branch master # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # modified: index.html # Lets use git mv instead. > $ git mv css/iphone.css css/mobile.css > $ git status # On branch master # Changes to be committed: # (use "git reset HEAD <file>..." to unstage) # # renamed: css/iphone.css -> css/mobile.css # # Changed but not updated: # (use "git add <file>..." to update what will be committed) # (use "git checkout -- <file>..." to discard changes in working directory) # # modified: index.html # Looks like we're good. So why didn't git recognise the rename the first time around when I used Finder?

  Read the article

• C# XPath Not Finding Anything

  - by ehdv

  I'm trying to use XPath to select the items which have a facet with Location values, but currently my attempts even to just select all items fail: The system happily reports that it found 0 items, then returns (instead the nodes should be processed by a foreach loop). I'd appreciate help either making my original query or just getting XPath to work at all. XML <?xml version="1.0" encoding="UTF-8" ?> <Collection Name="My Collection" SchemaVersion="1.0" xmlns="http://schemas.microsoft.com/collection/metadata/2009" xmlns:p="http://schemas.microsoft.com/livelabs/pivot/collection/2009" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <FacetCategories> <FacetCategory Name="Current Address" Type="Location"/> <FacetCategory Name="Previous Addresses" Type="Location" /> </FacetCategories> <Items> <Item Id="1" Name="John Doe"> <Facets> <Facet Name="Current Address"> <Location Value="101 America Rd, A Dorm Rm 000, Chapel Hill, NC 27514" /> </Facet> <Facet Name="Previous Addresses"> <Location Value="123 Anywhere Ln, Darien, CT 06820" /> <Location Value="000 Foobar Rd, Cary, NC 27519" /> </Facet> </Facets> </Item> </Items> </Collection> C# public void countItems(string fileName) { XmlDocument document = new XmlDocument(); document.Load(fileName); XmlNode root = document.DocumentElement; XmlNodeList xnl = root.SelectNodes("//Item"); Console.WriteLine(String.Format("Found {0} items" , xnl.Count)); } There's more to the method than this, but since this is all that gets run I'm assuming the problem lies here. Calling root.ChildNodes accurately returns FacetCategories and Items, so I am completely at a loss. Thanks for your help!

  Read the article

• paypal ipn case is not calling in paypal "pay now"

  - by Ipsita Rout

  paypal ipn case is not calling in paypal "pay now". In paypal button the following is set. return : "http://localhost/paypal.php?ch=return" cancel_return : "cancel_return" value="http://localhost/paypal.php?ch=cancel" notify_url : value="http://localhost/paypal.php?ch=ipn" paypal_form.php <form name="paypal" action="https://www.sandbox.paypal.com/cgi-bin/webscr" method="post"> <input type="hidden" name="cmd" value="_xclick"> <input type="hidden" name="rm" value="2"> <input type="hidden" name="no_notes" value="1"> <input type="hidden" name="custom" value="1"> <input type="hidden" name="business" value="[email protected]"> <input type="hidden" name="return" id="return" value="http://localhost/paypal.php?ch=return"> <input type="hidden" name="cancel_return" id="cancel_return" value="http://localhost/paypal.php?ch=cancel"> <input type="hidden" name="notify_url" id="notify_url" value="http://localhost/paypal.php?ch=ipn"> <input type="image" src="https://www.sandbox.paypal.com/WEBSCR-640-20110429-1/en_GB/i/btn/btn_paynow_SM.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online."> <img alt="" border="0" src="https://www.sandbox.paypal.com/WEBSCR-640-20110429-1/en_GB/i/scr/pixel.gif" width="1" height="1"> paypal.php <? include('db_connect.php'); $choice=isset($_GET['ch'])?$_GET['ch']:''; switch($choice){ case 'return': print "Thank You For Buying this product,Please Visit Again,If is there any complements Then suggest us.."; break; case 'ipn': $sql="INSERT INTO paypal(add_date) VALUES(now())"; mysql_query($sql); $x = fopen('test1.txt','w+'); $str2 = 'post data:dfydfhgfhjg'; foreach($_POST as $k=>$v){ $str2 .= $k.'--'.$v; } fwrite($x,$str2); fclose($x); break; case 'cancel': print "Thank You for visiting this site,Please inform your friend to buy products through paypal which is easy service... "; break; } ?>

  Read the article

• PayPal sandbox Buy Now Problem

  - by Tushar Ahirrao

  Hi , I have paypal sandbox test account. I want to create a 'buy Now' button. I am trying it with GWT. But its even not working with simple HTML form. It displays a 'Buy Now' button on HTML page and after clicking on it redirects to PayPal site. Where it ask to login to buy product but after that it goes on displying message: The email address or password you have entered does not match our records. Please try again. I am using buyer user to purchase product. I am pretty sure about the username and password. Providing here the simple HTML form which I am trying: <form action="https://www.paypal.com/cgi-bin/webscr" method="post" id="payPalForm"> <input type="hidden" name="item_number" value="1"> <input type="hidden" name="cmd" value="_xclick"> <input type="hidden" name="no_note" value="1"> <input type="hidden" name="business" value="[email protected]"> <input type="hidden" name="lc" value="US"> <input type="hidden" name="button_subtype" value="services"> <input type="hidden" name="cn" value="Add special instructions to the seller"> <input type="hidden" name="no_shipping" value="2"> <input type="hidden" name="rm" value="1"> <input type="hidden" name="bn" value="PP-BuyNowBF:btn_paynow_SM.gif:NonHosted"> <input type="hidden" name="variables" value="http://google.com"> <input type="hidden" name="cancel_return" value="http://google.com"> <input type="hidden" name="notify_url" value="http://google.com"> <input type="hidden" name="return" value="http://freelanceswitch.com/payment-complete /"> <input type="hidden" name="currency_code" value="USD"> <input name="item_name" type="hidden" value="Deal Name"> <input name="amount" type="hidden" value="500"> <input type="submit" name="Submit" value="Submit"> </form> Please advice. Thank you.

  Read the article

• Default Database Collations PenTesting Env

  - by dominicdinada

  I am using Ubuntu 9.10 with XAMPP ( Lampp "MYSQL 5.1.45 PHPMYADMIN 3.3.1 PHP 5.3.2 ) What my problem is, is that I set up my testing env to debug my scripts locally and when I did so there arose a problem. This problem is that I used firefox's addon SQLinject ME to test for weakness' and upon doing so it caused mysql to change the default local collations; character sets dir /opt/lampp/share/mysql/charsets/ collation connection latin1_general_ci (Global value) latin1_swedish_ci collation database latin1_swedish_ci collation server latin1_swedish_ci I have searched for quite sometime in regards to a solution to this problem and have come up with searching for the db.opt file which stores this information without success. Upon not finding a solution I removed lampp with the "sudo rm -fR /opt" command and reinstall and the problem still persists. I have tried to change the collations manually and still come up with the database displaying latin1_swedish_ci as the default language. Why is this a problem?? Why is it a problem with mysql? Because the application I am testing and debugging locally is built on the CodeIgnitor with Smarty framework and since this combination of framework is built to detect the LOCALES, Rather what the database defaults are I keep getting errors saying no language file for swedish...... Of course I could get the swedish language file to work around this problem but I do not feel the need to make this work around a perminant solution as with time when I move on to projects I will run into simular problems every time that A; When importing database files, backups etc it will default to import such databases as the locale swedish. B; As time passes on I might completly forget of this error and will be back to square one. I have found this code in searches for a fix,which seems to alter the tables to a desired Collaion; $value) { mysql_query("ALTER TABLE $value COLLATE latin1_general_ci"); }} echo "The collation of your database has been successfully changed!"; ? Which is handy to switch collations in One Schema at a time however this is not a fix when a framework doesnt care that the said database is in one langugae. It tests for the Default of the entire server. Someone with any knowledge of a purge or fix to this I would greatly appricate the help. One more final note is that when I was testing I only figured to back up the applications DataBase and not the entire Schema of the install. No matter if I uninstall or reinstall the database still seems to carry these problems.

  Read the article

• C++ EZWindows Linker Errors when trying to run demos

  - by Brent Nash

  I'm attempting to download and use the EZWindows ( http://www.cs.virginia.edu/c++programdesign/software/ ) SPARC installation (the http://www.cs.virginia.edu/c++programdesign/software/EzWindows2a-SPARC.tar.gz file). When trying to build some of the examples that come with it, I'm getting some linker errors that I just can't figure out. Here's the result of the uname -a command on the machine I'm running on (on which I am NOT an administrator): SunOS AAA.BBB.edu 5.10 Generic_138888-07 sun4v sparc SUNW,T5240 And here is the result of the g++ -v command: gcc version 2.95.2 19991024 (release) If you untar/unzip the package, I'm trying to compile the example in samples/chap03/lawn by simply doing "gmake" in that directory, here's what I get. Here's the error I get: bash-3.00$ gtar xfz EzWindows2a-SPARC.tar.gz gtar: Removing leading `./' from member names bash-3.00$ cd chap03/lawn bash-3.00$ gmake clean ; gmake rm -f *.o *~ lawn make lawn g++ -I/X11.6/include -I../../EzWindows/include -c prog3-5.cpp prog3-5.cpp: In function `int ApiMain()': prog3-5.cpp:75: warning: initialization to `long int' from `const float' prog3-5.cpp:85: warning: initialization to `int' from `float' prog3-5.cpp:86: warning: initialization to `int' from `float' g++ -o lawn prog3-5.o -L/X11.6/lib -R/X11.6/lib -lX11 -lsocket -L../../EzWindows/lib -lezwin -lXpm ld: warning: symbol `clog' has differing types: (file /usr/usc/gnu/gcc/2.95.2/lib/gcc-lib/sparc-sun-solaris2.6/2.95.2/libstdc++.so type=OBJT; file /lib/libm.so type=FUNC); /usr/usc/gnu/gcc/2.95.2/lib/gcc-lib/sparc-sun-solaris2.6/2.95.2/libstdc++.so definition taken Undefined first referenced symbol in file __dl__Q2t12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b0i03RepPv ../../EzWindows/lib/libezwin.a(WindowManager.o) __eh_pc ../../EzWindows/lib/libezwin.a(WindowManager.o) clone__Q2t12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b0i03Rep ../../EzWindows/lib/libezwin.a(WindowManager.o) ld: fatal: Symbol referencing errors. No output written to lawn collect2: ld returned 1 exit status *** Error code 1 make: Fatal error: Command failed for target `lawn' Current working directory /export/samfs-bcf/rcf-11/bnash/sparc/chap03/lawn gmake: *** [default] Error 1 This particular run was built using g++ 2.95.2, but I've also tried with versions 3.3.2 and 4.2.1 with other equally strange errors. I'm pretty sure that EZWindows requires a 2.x version of gcc & g++. I've tried to make sure that my LD_LIBRARY_PATH and PATH are setup to include everything that's needed, but it seems that may be incorrect. I'm running out of ideas. Anyone have any other ones?

  Read the article

• Escaping Code for Different Shells

  - by Jon Purdy

  Question: What characters do I need to escape in a user-entered string to securely pass it into shells on Windows and Unix? What shell differences and version differences should be taken into account? Can I use printf "%q" somehow, and is that reliable across shells? Backstory (a.k.a. Shameless Self-Promotion): I made a little DSL, the Vision Web Template Language, which allows the user to create templates for X(HT)ML documents and fragments, then automatically fill them in with content. It's designed to separate template logic from dynamic content generation, in the same way that CSS is used to separate markup from presentation. In order to generate dynamic content, a Vision script must defer to a program written in a language that can handle the generation logic, such as Perl or Python. (Aside: using PHP is also possible, but Vision is intended to solve some of the very problems that PHP perpetuates.) In order to do this, the script makes use of the @system directive, which executes a shell command and expands to its output. (Platform-specific generation can be handled using @unix or @windows, which only expand on the proper platform.) The problem is obvious, I should think: test.htm: <!-- ... --> <form action="login.vis" method="POST"> <input type="text" name="USERNAME"/> <input type="password" name="PASSWORD"/> </form> <!-- ... --> login.vis: #!/usr/bin/vision # Think USERNAME = ";rm -f;" @system './login.pl' { USERNAME; PASSWORD } One way to safeguard against this kind of attack is to set proper permissions on scripts and directories, but Web developers may not always set things up correctly, and the naive developer should get just as much security as the experienced one. The solution, logically, is to include a @quote directive that produces a properly escaped string for the current platform. @system './login.pl' { @quote : USERNAME; @quote : PASSWORD } But what should @quote actually do? It needs to be both cross-platform and secure, and I don't want to create terrible problems with a naive implementation. Any thoughts?

  Read the article

• How to update the session values on partial post back and how to make Javascript use the new values

  - by Mano

  The problem I am facing is the I am passing values to javascript to draw a graph using session values in the code behind. When page loads it take the value from the session and creates the graph, when I do partial post back using a Update Panel and Timer, I call the method to add values to the session and it does it. public void messsagePercentStats(object sender, EventArgs args) { ... if (value >= lowtarg && value < Toptarg) { vProgressColor = "'#eaa600'"; } else if (value >= Toptarg) { vProgressColor = "'#86cf21'"; } Session.Add("vProgressColor", vProgressColor); Session.Add("vProgressPercentage", "["+value+"],["+remaining+"]"); } } I use the update panel to call the above method <asp:ScriptManager ID="smCharts" runat="server" /> <asp:UpdatePanel runat="server" ID="Holder" OnLoad="messsagePercentStats" UpdateMode="Conditional"> <ContentTemplate> <asp:Timer ID="Timer1" runat="server" Interval="5000" OnTick="Timer_Tick" /> and the timer_tick method is executed every 5 seconds protected void Timer_Tick(object sender, EventArgs args) { ScriptManager.RegisterStartupScript(this, this.GetType(), "key", "r.init();", true); ResponseMetric rm = new ResponseMetric(); Holder.Update(); } I use ScriptManager.RegisterStartupScript(this, this.GetType(), "key", "r.init();", true); to call the r.init() Java script method to draw the graph on post back and it works fine. Java Script: var r = { init : function(){ r = Raphael("pie"), data2 = [<%= Session["vProgressPercentage"] %>]; axisx = ["10%", "20%"]; r.g.txtattr.font = "12px 'Fontin Sans', Fontin-Sans, sans-serif"; r.g.barchart(80, 25, 100, 320, data2, { stacked: true, colors: [<%= Session["vProgressColor"] %>,'#fff'] }); axis2 = r.g.axis(94, 325, 280, 0, 100, 10, 1); } } window.onload = function () { r.init(); }; This Java Script is not getting the new value from the session, it uses the old value when the page was loaded. How can I change the code to make sure the JS uses the latest session value.

  Read the article

• Editing/Updating one of the results in a search query.

  - by eggman20

  Hi guys. I'm creating a page that searches for an item and then be able to edit/update it. I was able to do it when it returns just one result but when it gives me multiple results I could only edit the very last item. Below is my code: ....... $dj =$_POST[djnum]; $sql= "SELECT * From dj WHERE datajack LIKE '$dj%'"; $result = mysql_query($sql); //more code in here// while ($info =mysql_fetch_array($result)) { // display the result echo "<form action=\"dj_update.php\" method=\"POST\"><input type=\"hidden\" name=\"djnumber\" value=\"".$info['datajack']."\">"; echo "<tr><td>DJ ".$info['datajack']."</td>"; echo "<td>".$info['building']."&nbsp;</td>"; echo "<td>Rm ".$info['room']."&nbsp;</td>"; echo "<td>".$info['switch']."&nbsp;</td>"; echo "<td>".$info['port']."&nbsp;</td>"; echo "<td>".$info['notes']."&nbsp;</td>"; echo "<td style=\"text-align:center;\"><input type=\"Submit\" value=\"Edit\" ></td></tr>"; } // more code here // Then this is the screen shot of the result: The idea is the user should be able to click on "Edit" and be able to edit/update that particular item. But when I click any of the Edit button I could only edit the last item. What am I missing here? Is there an easier way to do this? Thanks guys and Happy new year!

  Read the article

• C program using inotify to monitor multiple directories along with sub-directories?

  - by lakshmipathi

  I have program which monitors a directory (/test) and notify me. I want to improve this to monitor another directory (say /opt). And also how to monitor it's subdirectories , current i'll get notified if any changes made to files under /test . but i'm not getting any inotifcation if changes made sub-directory of /test, that is touch /test/sub-dir/files.txt .. Here my current code - hope this will help /* Simple example for inotify in Linux. inotify has 3 main functions. inotify_init1 to initialize inotify_add_watch to add monitor then inotify_??_watch to rm monitor.you the what to replace with ??. yes third one is inotify_rm_watch() */ #include <sys/inotify.h> int main(){ int fd,wd,wd1,i=0,len=0; char pathname[100],buf[1024]; struct inotify_event *event; fd=inotify_init1(IN_NONBLOCK); /* watch /test directory for any activity and report it back to me */ wd=inotify_add_watch(fd,"/test",IN_ALL_EVENTS); while(1){ //read 1024 bytes of events from fd into buf i=0; len=read(fd,buf,1024); while(i<len){ event=(struct inotify_event *) &buf[i]; /* check for changes */ if(event->mask & IN_OPEN) printf("%s :was opened\n",event->name); if(event->mask & IN_MODIFY) printf("%s : modified\n",event->name); if(event->mask & IN_ATTRIB) printf("%s :meta data changed\n",event->name); if(event->mask & IN_ACCESS) printf("%s :was read\n",event->name); if(event->mask & IN_CLOSE_WRITE) printf("%s :file opened for writing was closed\n",event->name); if(event->mask & IN_CLOSE_NOWRITE) printf("%s :file opened not for writing was closed\n",event->name); if(event->mask & IN_DELETE_SELF) printf("%s :deleted\n",event->name); if(event->mask & IN_DELETE) printf("%s :deleted\n",event->name); /* update index to start of next event */ i+=sizeof(struct inotify_event)+event->len; } } }

  Read the article

• log4bash: Cannot find a way to add MaxBackupIndex to this logger implementation

  - by Syffys

  I have been trying to modify this log4bash implementation but I cannot manage to make it work. Here's a sample: #!/bin/bash TRUE=1 FALSE=0 ############### Added for testing log4bash_LOG_ENABLED=$TRUE log4bash_rootLogger=$TRACE,f,s log4bash_appender_f=file log4bash_appender_f_dir=$(pwd) log4bash_appender_f_file=test.log log4bash_appender_f_roll_format=%Y%m log4bash_appender_f_roll=$TRUE log4bash_appender_f_maxBackupIndex=10 #################################### log4bash_abs(){ if [ "${1:0:1}" == "." ]; then builtin echo ${rootDir}/${1} else builtin echo ${1} fi } log4bash_check_app_dir(){ if [ "$log4bash_LOG_ENABLED" -eq $TRUE ]; then dir=$(log4bash_abs $1) if [ ! -d ${dir} ]; then #log a seperation line mkdir $dir fi fi } # Delete old log files # $1 Log directory # $2 Log filename # $3 Log filename suffix # $4 Max backup index log4bash_delete_old_files(){ ##### Added for testing builtin echo "Running log4bash_delete_old_files $@" &2 ##### if [ "$log4bash_LOG_ENABLED" -eq $TRUE ] && [ -n "$3" ] && [ "$4" -gt 0 ]; then local directory=$(log4bash_abs $1) local filename=$2 local maxBackupIndex=$4 local suffix=$(echo "${3}" | sed -re 's/[^.]/?/g') local logFileList=$(find "${directory}" -mindepth 1 -maxdepth 1 -name "${filename}${suffix}" -type f | xargs ls -1rt) local fileCnt=$(builtin echo -e "${logFileList}" | wc -l) local fileToDeleteCnt=$(($fileCnt-$maxBackupIndex)) local fileToDelete=($(builtin echo -e "${logFileList}" | head -n "${fileToDeleteCnt}" | sed ':a;N;$!ba;s/\n/ /g')) ##### Added for testing builtin echo "log4bash_delete_old_files About to start deletion ${fileToDelete[@]}" &2 ##### if [ ${fileToDeleteCnt} -gt 0 ]; then for f in "${fileToDelete[@]}"; do #### Added for testing builtin echo "Removing file ${f}" &2 #### builtin eval rm -f ${f} done fi fi } #Appender # $1 Log directory # $2 Log file # $3 Log file roll ? # $4 Appender Name log4bash_filename(){ builtin echo "Running log4bash_filename $@" &2 local format local filename log4bash_check_app_dir "${1}" if [ ${3} -eq 1 ];then local formatProp=${4}_roll_format format=${!formatProp} if [ -z ${format} ]; then format=$log4bash_appender_file_format fi local suffix=.`date "+${format}"` filename=${1}/${2}${suffix} # Old log files deletion local previousFilenameVar=int_${4}_file_previous local maxBackupIndexVar=${4}_maxBackupIndex if [ -n "${!maxBackupIndexVar}" ] && [ "${!previousFilenameVar}" != "${filename}" ]; then builtin eval export $previousFilenameVar=$filename log4bash_delete_old_files "${1}" "${2}" "${suffix}" "${!maxBackupIndexVar}" else builtin echo "log4bash_filename $previousFilenameVar = ${!previousFilenameVar}" fi else filename=${1}/${2} fi builtin echo $filename } ######################## Added for testing filename_caller(){ builtin echo "filename_caller Call $1" output=$(log4bash_abs $(log4bash_filename "${log4bash_appender_f_dir}" "${log4bash_appender_f_file}" "1" "log4bash_appender_f" )) builtin echo ${output} } #### Previous logs generation for i in {1101..1120}; do file="${log4bash_appender_f_file}.2012${i:2:3}" builtin echo "${file} $i" touch -m -t "2012${i}0000" ${log4bash_appender_f_dir}/$file done for i in {1..4}; do filename_caller $i done I expect log4bash_filename function to step into the following if only when the calculated log filename is different from the previous one: if [ -n "${!maxBackupIndexVar}" ] && [ "${!previousFilenameVar}" != "${filename}" ]; then For this scenario to apply, I'd need ${!previousFilenameVar} to be correctly set, but it's not the case, so log4bash_filename steps into this if all the time which is really not necessary... It looks like the issue is due to the following line not working properly: builtin eval export $previousFilenameVar=$filename I have a some theories to explain why: in the original code, functions are declared and exported as readonly which makes them unable to modify global variable. I removed readonly declarations in the above sample, but probleme persists. Function calls are performed in $() which should make them run into seperated shell instances so variable modified are not exported to the main shell But I cannot manage to find a workaround to this issue... Any help is appreciated, thanks in advance!

  Read the article

• Install usblib package - Ubuntu

  - by Tom celic

  I need the package libusb for another package I am installing. I tried the following which seemed to install the package, sudo apt-get install libusb-dev but when I try to install the other package I get, configure: error: Package requirements (libusb-1.0 >= 0.9.1) were not met: No package 'libusb-1.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBUSB_CFLAGS and LIBUSB_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. When I run the command dpkg -L libusb-dev, I get: /. /usr /usr/bin /usr/bin/libusb-config /usr/include /usr/include/usb.h /usr/lib /usr/lib/libusb.a /usr/lib/libusb.la /usr/lib/pkgconfig /usr/lib/pkgconfig/libusb.pc /usr/share /usr/share/doc /usr/share/doc/libusb-dev /usr/share/doc/libusb-dev/html /usr/share/doc/libusb-dev/html/index.html /usr/share/doc/libusb-dev/html/preface.html /usr/share/doc/libusb-dev/html/intro.html /usr/share/doc/libusb-dev/html/intro-overview.html /usr/share/doc/libusb-dev/html/intro-support.html /usr/share/doc/libusb-dev/html/api.html /usr/share/doc/libusb-dev/html/api-device-interfaces.html /usr/share/doc/libusb-dev/html/api-timeouts.html /usr/share/doc/libusb-dev/html/api-types.html /usr/share/doc/libusb-dev/html/api-synchronous.html /usr/share/doc/libusb-dev/html/api-return-values.html /usr/share/doc/libusb-dev/html/functions.html /usr/share/doc/libusb-dev/html/ref.core.html /usr/share/doc/libusb-dev/html/function.usbinit.html /usr/share/doc/libusb-dev/html/function.usbfindbusses.html /usr/share/doc/libusb-dev/html/function.usbfinddevices.html /usr/share/doc/libusb-dev/html/function.usbgetbusses.html /usr/share/doc/libusb-dev/html/ref.deviceops.html /usr/share/doc/libusb-dev/html/function.usbopen.html /usr/share/doc/libusb-dev/html/function.usbclose.html /usr/share/doc/libusb-dev/html/function.usbsetconfiguration.html /usr/share/doc/libusb-dev/html/function.usbsetaltinterface.html /usr/share/doc/libusb-dev/html/function.usbresetep.html /usr/share/doc/libusb-dev/html/function.usbclearhalt.html /usr/share/doc/libusb-dev/html/function.usbreset.html /usr/share/doc/libusb-dev/html/function.usbclaiminterface.html /usr/share/doc/libusb-dev/html/function.usbreleaseinterface.html /usr/share/doc/libusb-dev/html/ref.control.html /usr/share/doc/libusb-dev/html/function.usbcontrolmsg.html /usr/share/doc/libusb-dev/html/function.usbgetstring.html /usr/share/doc/libusb-dev/html/function.usbgetstringsimple.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptor.html /usr/share/doc/libusb-dev/html/function.usbgetdescriptorbyendpoint.html /usr/share/doc/libusb-dev/html/ref.bulk.html /usr/share/doc/libusb-dev/html/function.usbbulkwrite.html /usr/share/doc/libusb-dev/html/function.usbbulkread.html /usr/share/doc/libusb-dev/html/ref.interrupt.html /usr/share/doc/libusb-dev/html/function.usbinterruptwrite.html /usr/share/doc/libusb-dev/html/function.usbinterruptread.html /usr/share/doc/libusb-dev/html/ref.nonportable.html /usr/share/doc/libusb-dev/html/function.usbgetdrivernp.html /usr/share/doc/libusb-dev/html/function.usbdetachkerneldrivernp.html /usr/share/doc/libusb-dev/html/examples.html /usr/share/doc/libusb-dev/html/examples-code.html /usr/share/doc/libusb-dev/html/examples-tests.html /usr/share/doc/libusb-dev/html/examples-other.html /usr/share/doc/libusb-dev/copyright /usr/share/doc-base /usr/share/doc-base/libusb-dev /usr/share/man /usr/share/man/man1 /usr/share/man/man1/libusb-config.1.gz /usr/lib/libusb.so /usr/share/doc/libusb-dev/changelog.Debian.gz Any ideas??

  Read the article

• phablet-flash aborting while installing Ubuntu Touch on Nexus 4

  - by Till B

  I have a Nexus 4 with Android 4.3 installed and I want to flash it to Ubuntu Touch. My system is Ubuntu 12.04, running inside a virtual machine on Mac OS 10.5.8. To use the VM, I opened an NAT bridge and forwarded port 5037 for adb, I can see the Nexus with adb and e.g. use the adb shell into it. USB ports are also forwarded to the VM. I follow these instructions to the letter. My bootloader is unlocked, just as it was described in the instructions. Now I encounter different issues, when executing sudo phablet-flash ubuntu-system --no-backup. On the first run, it got stuck in this state: INFO:phablet-flash:Decompressing partitions/recovery.img from /home/till/Downloads/phablet-flash/imageupdates/pool/device-5ba3031cb0d6fc624848266edba781e3e821b6e1e8dd21105725f0ab26077d0a.tar.xz INFO:phablet-flash:Restarting device... wait INFO:phablet-flash:Restarting device... wait complete INFO:phablet-flash:Booting /tmp/tmpMSN8bm/partitions/recovery.img < waiting for device > downloading 'boot.img'... OKAY [ 1.772s] booting... OKAY [ 0.005s] finished. total time: 1.779s INFO:phablet-flash:Waiting for recovery image to boot The following happened: around the line "INFO:phablet-flash: Restarting...", it rebooted into the bootloader. The bootloader shows only for two seconds, then the screen goes off and the phone stays off. But I do notice, that the screen is not off - it is just black, but the background light is on. If I wait long enough, phablet-flash aborts with ERROR:phablet-flash:Wait for recovery expired On the second try, I wanted to manually start the bootloader and choose "Recovery mode". Pressing "volume down+power" at first did nothing. Releasing the buttons and then pressing them again brought me into the bootloder. After choosing "Recovery mode", phablet-flash continued and after a while aborted with the following output: INFO:phablet-flash:Wait for recovery image to boot complete INFO:phablet-flash:Clearing /data and /cache INFO:phablet-flash:Pushing /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz to /cache/recovery/ failed to copy '/home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz' to '/cache/recovery/': Permission denied ERROR:phablet-flash:Command 'adb push /home/till/Downloads/phablet-flash/imageupdates/pool/ubuntu-2b5345658b58e55207c4a4e7b6b3d8cd4f3d9a3187d2448fc9020c884234bac0.tar.xz /cache/recovery/' returned non-zero exit status 1 Removing directory /tmp/tmpDnbz6N Removing directory /tmp/tmpth4L6w What can I do to properly flash my phone with Ubuntu Touch? I noticed that adb does not show the phone in recovery mode: Typing adb devices, when the Nexus 4 is in recovery mode, shows the serial number and the state device, where it should show recovery. Should the phone be rooted? This is not mentioned in the instructions.

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >