Search Results

Search found 6432 results on 258 pages for 'wireless adapter'.

Page 195/258 | < Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• VMware - Broadcom 1000Gbps NIC does not link at 100Mbps to a Cisco switch port

  - by Spirit

  Today we've stumbled on a very awkward situation with our VMWare Server. The server is with ESX 3.5 that has a 1Gbps NIC. We bought a brand new managed Cisco Linksys switch with 10/100Mbps interface ports but when we plugged the cable in one of the ports the link simply does not wanted to activate :S... Does anyone with more VMware experience have ever had similar problem? From what I know is that 1Gbps NICs are backwards compatible with 100Mbps switches. This is what we've tryed so far but with no success: Tryed: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 Tryed to modify the /etc/modules.conf folowing the guide from this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=813 After the changes I have restarted the networking services using # service network restart, # service mgmt-vmware restart and # service vmware-vpxa restart It seems that no matter how many times, or whatever approach/method (GUI or Shell) we try to change the speed and duplex of the network adapter and to force it to 100mbps it only accepts 1Gbps .. I am starting to go nuts :@

  Read the article

• DisplayPort to DVI not working on Quadro FX 580

  - by kaosvid

  I have a PNY NVIDIA Quadro FX 580 graphics card with 1x DVI and 2x DisplayPorts. The DVI port works fine with both my Viewsonic monitors but I cannot get either of the DPs to work using the supplied DP to DVI adapter; all I get is a "no signal" on either monitor when connected to either DP port. The NVIDIA Control Panel shows that the second monitor is not connected when in fact it is. How do I get the second monitor to work? System: Windows XP Professional 32-bit Asus P5Q motherboard Core 2 Duo E8500 CPU 4GB PC8500 RAM

  Read the article

• Oracle 11g network configuration

  - by Kylo

  Hi, I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• Are there any 17-20 inch monitors that support displayport?

  - by WildJoe

  I've got dual monitors now (both 20 inch 1600x1200). After seeing the new eyefinity cards out there (and reading the CodingHorror post on three monitors) I've decided to get a third. It's time to upgrade my video card anyway. Since I don't already have a third monitor and will be buying one new, I figure it'd make sense to buy one that already had a DisplayPort interface so as to avoid the adapter issue. However, I can't seem to find any monitors on newegg that support this (it's not even an option in the power search, and a keyword search turned up only adapters and video cards). A quick google showed me several 30 inchers (like Dell's, but that's way too expensive, and I don't have that much room on my desk even if I had that money) and some 22 inch models. Again, I'm looking for a 17-20 inch with a DisplayPort interface built in. Any suggestions?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have a lot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• Just installed Ubuntu 10.10, can't connect via SSH

  - by swilliams

  I've just downloaded and installed Ubuntu 10.10 in a VM on virtualbox (4.0.4). Everything on the VM is set to the defaults: NAT adapter. When installing the OS, I selected OpenSSH, and nothing else. I've tried to connect to the server via ssh from the host (running Mac OS X), but it only timeouts. Can't scp my credentials to it or ping the server either. As far as I can tell, the server is connected fine, has a valid IP, and can ping google.com. I know I'm missing something basic here... I don't believe I have any kind of firewall up, unless there's one I don't know about that comes with the install. iptables has the default configuration.

  Read the article

• Windows 7 Intermittent Connection Issues (Continuously "identifying")

  - by andrewktmeikle

  I have an issue solely with my desktop windows 7 machine on my network (the network has multiple different devices, on the same and different operating systems) and the issue is that irregularly, although sometimes frequently, I briefly get disconnected from the internet (briefly is for around 5-10 seconds). However, I never loose the bars on the wifi thing, eg I don't get the yellow triangle, but it goes to the identifying stage and then reconnects. The reason I noticed the problem was when I was streaming music it would stop and I would refresh the page and it would start working again ( turned out it was because it took that amount of time to get connected again). So my question is, what would cause the intermittent issues and start the "identifying" process again. I don't think its my router, because no one else is having problems, so the other option is that its a problem specifically with my machine. I'm connecting to a Netgear DG834GT router, and I'm using a Edimax Wireless-N150 USB Adapter. Anyone have any ideas?

  Read the article

• aireplay - reading but not sending

  - by oneat

  I'm trying aircrack injection, everything is working I authenticated, but aireplay is not working aireplay-ng -3 -b 00:12:2A:01:74:05 -h 78:e4:00:87:71:8b mon0 18:53:03 Waiting for beacon frame (BSSID: 00:12:2A:01:74:05) on channel 7 Saving ARP requests in replay_arp-0817-185303.cap You should also start airodump-ng to capture replies. Read 4988 packets (0 ARPs, 4 ACKs), sent 0 packets...(0 pps) Why isn't it working? Why isn't it sending packets? 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) I tested injection on injection test in aircrack tutorial, despite driver wasn't patched.

  Read the article

• Lenovo G500 Re-booting failed

  - by Sune

  I have a Lenovo G500. Yesterday it asked me to reboot the system. I did. Now it wont come back on. I have tried everything I read online like taking out the battery and holding the power button in for 20 seconds, then switching on the pc with only the ac adapter plugged in. I still only see the backlight of the pc, nothing else. I also tried to hold in the Fn key and tried all other F keys (F2, F12, etc.) I also pressed that little button next to the power button, but nothing is responding. Please help.

  Read the article

• "Device Not Ready" when attempting to connecting an old (DOS) hard drive to windows 7

  - by Christopher Vigliotti

  I have an old Western Digital Caviar 2540 hard drive that I am attempting to connect to a Windows 7 machine by using a Bytecc BT-300 USB 2.0 to IDE/SATA Adapter. I'm connecting things in the right order (power, then sata, then usb) and the jumper settings on the drive are at present set to slave, but am still having an issue. I am recieving a message that the drive is not initialized. When I go into Computer Management I can see the drive (as "Disk 5, Unknown, Not Initialized"), but when I attempt to initialize it or right-click and select "Offline" It tells me that "the device is not ready". Is there something that I can to to get around this, connect the drive and copy the data that I need off of this drive? Is there a third party tool available that I can use?

  Read the article

• KVM Switch for a mac and a Windows (XP or 7) machine to share VDU

  - by Adrian Parker

  Have a MacPro (snow leopard) connected to an (windows standard) Asus 25" monitor via a DVI--VGA adapter. Now the boss wants me to work from home, so I want to share my Asus display with a Windows XP laptop. No doubt once my wife sees this, she will want to do the same thing, but with a Windows 7 laptop. So what I would like, I think, is your recommendations for a KVM switch (or better solution) that allows the Mac and a (windows 7 or windows xp) laptop to share the Asus display. Bonus marks if they can share Apple keyboard and magic mouse, but am quite happy to use separate mouse keyboards. The MacPro is the one that is always connected, the laptops come and go. Any ideas? Thanks in advance for any help.

  Read the article

• How can I view my video card's temperature via SSH?

  - by NT3RP

  I've finally managed to set up my two ATI Radeon 6950 video cards in my machine, but the cards can get quite hot. Based on the arrangement of my apartment, I want to be able to SSH into the machine an execute a command to find out the temperature. What I have tried so far is this... export DISPLAY=:0.0 sudo aticonfig --adapter=0 --od-gettemperature However, when I do that via SSH, I get the following error: ERROR - X needs to be running to perform ATI Overdrive(TM) commands If I turn on X forwarding when I remote into the machine, then it just seems to affect my local machine instead of the remote machine. Am I doing this correctly? Is there a better way to monitor my video card's temperature?

  Read the article

• Dual Monitors don't turn off/sleep when they should

  - by Mario

  Details: Dual 25" monitors connected to HP Envy via HDMI and display port via DVI adapter. Power scheme is set up in high performance (Dim Display: Never - Turn Off Display: 15 mins - Computer Sleep: Never) Screensaver is set up to kick in after 10 mins of idle (which happens) 5 minutes later, the screensaver stops. The "Monitor Going to Sleep" notice appears on screen and monitors go to sleep briefly. All is well thus far. Suddenly, the Windows 7 alert sound when a device is unplugged is heard. Monitors then turn back on. Screens are black. Only the mouse cursor is displayed. Backlighting is back on. This only started happening after I obtained and connected the second 25" monitor a few days ago. However, I had a 24" in its place before, and this wasn't happening. Why is this happening and how do I correct this behavior? Thanks in advance.

  Read the article

• How do I improve picture quality while streaming live football (soccer) from my Dell D600 to an HDTV?

  - by Bob

  I have fibre broadband with speeds up to 38mbs, my Dell D600 has its max 2gb ram and has an ATI Mobility RADEON 9000 4xAGP 32mb card in it...Its TV support it says is NTSC or PAL in S-video and composite modes with a 7-pin mini-DIN connector (optional S-video to composite video adapter cable) and a vga port which i am using at the moment... The laptop runs Windows XP, an 80g HD with only windows + necessary updates and anti virus software on it..... There is HDMI on the TV, but not the laptop Fairly slow moving and close up pictures arent too bad, but when the movment is fast(a shot on goal) or in the distance, I cant see the ball and the images go out of focus.

  Read the article

• HP Presario CQ 61-322ER (VV884EA) Wi-Fi hang up!

  - by qgrabber

  I have my new laptop and don't have Windows XP drivers for it. I found that it contains the Broadcom BCM4310 chip, but when I install any Broadcom driver my laptop hangup on installing bcm5*.sys driver. Only power-off button make any effect. After reboot the device list (Device Manager) contains Broadcom WLAN adapter, but it is marked as disabled, for some hardware errror! Also if I disable device before, and install driver - then - all is OK! But when I try to enable it, Windows hang up anyway (no speaker beep, no mouse input, no keyboard input - nothing) What is the solution?

  Read the article

• What's the best multiple monitor setup I can buy for $500 and a macbook?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• Bay Speaker Panel Installation

  - by JordanD

  I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

  Read the article

• Can DVI look different?

  - by queueoverflow

  I have a desktop with an nVidia GT 9500 which has two DVI slots. I have a 24" TN-Panel TFT on that and it looks pretty good. Then I hooked it onto the DisplayPort of my ThinkPad with the Intel HD 3000 card with an DP-DVI adapter and I think that the fonts look even clearer. Both computers run Kubuntu 12.04, although the ThinkPad is freshly set up, while the desktop is migrated from the previous release. Is this a hardware thing or is it just some setting in the anti-aliasing or sub-pixel-hinting?

  Read the article

• Share the DVB card on windows 7 [closed]

  - by Bashar Kernel

  I have 2 computers connected to a router and I have a DVB card in one of them. I want to use the one DVB card to feed both of them. I read about it and I know that I want to share the DVB adapter with the Internet Connection Sharing on the LAN network. But when I use the connection sharing, I lose my internet access I tried to use "Bridge Connection", but then I also lost my internet access too. Can any one tell me how to fix this problem? And how to view the channels (for example how to use the VLC)?

  Read the article

• VM: Windows 7 host, Linux guest, VT-d?

  - by chx

  I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

  Read the article

• SBS 2003 CEICW - Multiple IP's causing error

  - by mushmush

  two IP adresses (different subnets) are assigned to one networkcard. In the Properties window the order is right, however the Server always picks the wrong one as the "default ip". This causes CEICW to fail with an "The DHCP Server service is started, but the DHCP scope does not match the network address of the server's local area network (LAN) adapter." error. The DHCP Server is installed and configured, but not for the other subnet as it is not needed. If i remove the other subnets IP everything works fine. Is there any way around that without temporarily removing the IP adress or configuring DHCP for one more Subnet?

  Read the article

• VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

  - by user1257262

  So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

  Read the article

• How to make my display Grayscale?

  - by Oldarney

  I want to reduce the saturation of my laptop monitor to the point that it is almost grayscale. That's the goal. Intel and Asus don't have an answer. Asus Splendid and the intel graphics control panel can increase the saturation, but not lower it. I would prefer a software solution, although I DIY'ed a vga grayscale adapter for my desktop. I have an Asus UL30A with an Intel GMA 4500MHD. I know that the latest ATI cards, windotosh's and high end nvidia cards all support control panel desaturation. Why? black and white makes me 3 times more productive.

  Read the article

• Configure Virtualbox guest with static IP, SSH and internet access from host

  - by koskoz

  I have an Ubuntu Server 12 virtualbox guest running on a Windows 7 host which has a dynamic IP (and I don't wanna change this considering it's a laptop and I'm changing network frenquently). I want to have a static IP for my VM and a SSH access from my host but I still want to have the internet access on my VM. I tried added a second host only adapter and configured /etc/network/interface to set eth1 to a static ip, but I can't connect via SSH to it. Setting only adapter1 to host only works for SSH and static IP but I lose the internet access.

  Read the article

< Previous Page | 191 192 193 194 195 196 197 198 199 200 201 202  | Next Page >