Search Results

Search found 5776 results on 232 pages for 'enterprise 2 0'.

Page 196/232 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Setup 2003 R2 Radius server to work on vista/seven

  - by Fox

  Hi All, I'm currently trying to configure my 2003 R2 server RADIUS module to enable WIFI client to authenticate throught my Active Directory. The RADIUS server use MS-CHAP V2 as encryption method. I got several Access Point running DD-WRT, configured to use WPA2-Enterprise security that use Radius Server. Everything is setup, and almost working. When I say almost working, I mean, I can login using my AD Credential on my IPod or even on a MacBook running OS X, Windows XP also work with some little tweak in connection properties. The problem is Windows Vista or Windows Seven clients computers that are not inside domain. It doesn't work at all, it doesn't even prompt for user/password/domain. I already install the patch for IAS to make the certsrv compatible with Vista and Seven, but still doesn't work. Anyone ever encounter the same issue I have right now? I'm searching for a solution to this for several already and still not find anything. Looks like many people have the same issue too. Thanks all for you eventual answers.

  Read the article

• Export-Mailbox Error

  - by tuck918

  All, I am using export-mailbox to move some data and it is working fine until I get this error: StatusMessage : Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000 This is the command I am using: export-mailbox -identity mailboxA -targetmailbox mailboxB -targetfolder folderA -allowmerge We are on SP2 and I am running this under an account that is not a domain or enterprise admin. THe account has Exchange Server Administrator Permission Both Source and Target Exchange Mailbox Server. THe account is part of the Local Administrators Group Member Both Source and Target Exchange Mailbox Server. This account has Full Access permission on both the target and source servers. THe issue happens at any time and I am only trying to run this on one mailbox, the only mailbox I need to run it on. THe event log is "Error Exchange Migration Export Mailbox Event 1008". The log under migration logs just shows that it was running okay then it gives the same error as above "Error was found for mailboxA ([email protected]) because: Error occurred in the step: Moving messages. Failed to copy messages to the destination mailbox store with error: MAPI or an unspecified service provider. ID no: 00000000-0000-00000000, error code: -1056749164" Any ideas on what to do/try?

  Read the article

• ISC DHCPD IPv6 for multiple interfaces

  - by Seoman

  I want to assign multiple IPv6 to a server with multiple NIC. As IPv6 RFC defines, each server has a unique DUID that can have one of the 3 formats (LL, LLT or enterprise). And each NIC has an IAID. So a request from NIC1 its the DUID and the IAID of the NIC1 and the request from NIC2 its the same DUID but the IAID its different. The problem is that from a Centos box, when I ask for an IP in 2 different interfaces, I get the same IP. I can't find how to specify host entry based on DUID and the IAID. I see some people generating a unique DUID based on the MAC of the NIC but this is not IPv6 RFC says. What I tried is: host entry1 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:09:40:5d"; fixed-address6 2001:db8:0:1::202; } host entry2 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:7e:c9:ec"; fixed-address6 2001:db8:0:1::201; } This causes a Segmentation Fault in the client (what is scary...). I guess is not the right use for ia-na option but I don't see any other option.

  Read the article

• Windows 7 VPN Error 619

  - by TravisPUK

  So I am running Windows 7 Enterprise. This morning I was able to VPN using the built in VPN (Connect to Work Network etc). I had to change my network's IP address range and now the VPN will not work. It just stalls on the Verifying user name and password... message. But then it returns the 619 error. Anybody know why changing my machine's IP address would cause this problem? Where should I be looking to try and fix this issue? I have tried this on a Windows XP machine that also had the IP address range change and this still connects fine using exactly the same connection details. EDIT The internal network range changed from 192.x.x.x to 10.x.x.x. This was done on the entire Active Directory. All machines are running fine and the Windows XP machine, that works going to the same client VPN mentioned above is on the same network. Both the XP and the Win 7 machines are using DHCP served by the Domain Controller. The client domain is not performing any IP range checks/restrictions. The VPN is outside the internal network, connection is being made via the Internet and not passing through any other machine, other than the normal domain machines, ie DNS etc. This is passing through a router and the router has the relevant VPN passthrough options configured. All internal machines are working correctly with other forms of VPN, ie Cisco, Sonic etc (these were tested on other machines, they are not installed on the Vista or Win7 machines). After further testing, this is occurring on all Win7 and Vista machines where they can no longer connect to the client VPN, however all XP machines can still connect fine. This has been tested on three Vista, two Win7 and five XP machines. All machines are on DHCP and tests have been done with both the firewalls turned on and off, as well as with fixed IPs being used. Thanks Travis

  Read the article

• Resolve another domain from current AD domain

  - by faulty

  We have 2 AD domain setup in our office. First is the primary domain for our office and exchange. The 2nd one is for development use to simulate production environment of our clients. Both domain are hosted on Windows 2008 R2 Enterprise. We, the development team has no access to the office domain other than login and email purpose. DNS is running on PDC of both domain. Both domain does not use public domain name. Now, our machines are joined to the development domain and we use outlook to access our office's exchange. We've added DNS entries for both the domain. From time to time we are having problem resolving our office domain (i.e. during outlook login), which we need to edit our NIC's DNS to have only DNS server from our office and then flush DNS. After that switch back once it's able to resolve. Is there a permanent solution for this scenario like specifying that the office domain be resolve with another DNS server when requested from the development domain? Thanks

  Read the article

• Compressing and copying large files on Windows Server?

  - by Aaron

  I've been having a hard time copying large database backups from the database server to a test box at another site. I'm open to any ideas that would help me get this database moved without having to resort to a USB hard drive and the mail. The database server is running Windows Server 2003 R2 Enterprise, 16 GB of RAM and two quad-core 3.0 GHz Xeon X5450s. Files are SQL Server 2005 backup files between 100 GB and 250 GB. The pipe is not the fastest and SQL Server backup files typically compress down to 10-40% of the original, so it made sense to me to compress the files first. I've tried a number of methods, including: gzip 1.2.4 (UnxUtils) and 1.3.12 (GnuWin) bzip2 1.0.1 (UnxUtils) and 1.0.5 (Cygwin) WinRAR 3.90 7-Zip 4.65 (7za.exe) I've attempted to use WinRAR and 7-Zip options for splitting into multiple segments. 7za.exe has worked well for me for database backups on another server, which has ~50 GB backups. I've also tried splitting the .BAK file first with various utilities and compressing the resulting segments. No joy with that approach either- no matter the tool I've tried, it ends up butting against the size of the file. Especially frustrating is that I've transferred files of similar size on Unix boxes without problems using rsync+ssh. Installing an SSH server is not an option for the situation I'm in, unfortunately. For example, this is how 7-Zip dies: H:\dbatmp>7za.exe a -t7z -v250m -mx3 h:\dbatmp\zip\db-20100419_1228.7z h:\dbatmp\db-20100419_1228.bak 7-Zip (A) 4.65 Copyright (c) 1999-2009 Igor Pavlov 2009-02-03 Scanning Creating archive h:\dbatmp\zip\db-20100419_1228.7z Compressing db-20100419_1228.bak System error: Unspecified error

  Read the article

• VSFTPD - FTP over TLS - Upload stops after exactly 82k?

  - by Redsandro

  I installed a VSFTP daemon on a CentOS server, using a RSA certificate for logging in using explicit TLS. Now, I cannot upload more than 82k. With files under that limit, there is no problem. The FTP works like a charm. But as soon as a file reaches 82k with FileZilla (81,952 bytes to be exact), the transfer will stop, and the FTP client hangs until time out is reached. FTP client console: 15:10:21 Command: STOR jquery-1.7.2.min.js 15:10:21 Response: 150 Ok to send data. 15:11:21 Error: Connection timed out 15:11:21 Error: File transfer failed after transferring 82 KB in 60 seconds /var/log/vsftpd.log FTP command: Client "x.x.x.x", "STOR jquery-1.7.2.min.js" FTP response: Client "x.x.x.x", "150 Ok to send data." OK UPLOAD: Client "x.x.x.x", "jquery-1.7.2.min.js", 81952 bytes, 1.32Kbyte/sec FTP response: Client "x.x.x.x", "226 File receive OK." // NOT okay, file is bigger // No mention of error here I cannot find relevant info about this problem, apart from a possible problem with trans_chunk_size (not mentioned in default config), but I tried different sizes and it has no impact on the problem. trans_chunk_size=4096 trans_chunk_size=8192 trans_chunk_size=9999 Ofcourse, after every configuration change, I restarted the server: /etc/init.d/vsftpd restart What else can cause this? It's not the latest version, but it's the latest update within the repositories that has been deemed fit for enterprise usage: Package info: $ yum info vsftpd Loaded plugins: fastestmirror Installed Packages Name : vsftpd Arch : x86_64 Version : 2.0.5 Release : 24.el5_8.1 Size : 286 k Repo : installed Summary : vsftpd - Very Secure Ftp Daemon URL : http://vsftpd.beasts.org/ License : GPL Description: vsftpd is a Very Secure FTP daemon. It was written completely from scratch.

  Read the article

• Oracle 10g for Windows does not start up on system boot

  - by Mike Dimmick

  We have an Oracle 10g Enterprise Edition installation (10.2.0.1.0) on a Windows Server 2003 virtual machine. It was initially created with Virtual Server 2005 R2 SP1 but has now been migrated to Windows Server 2008 Hyper-V. The services start on system boot, but the instance does not start up. This problem was actually occurring on Virtual Server after a migration from one server to another, but I managed to fix it then with: oradim -edit -sid ORCL -startmode auto However, this now has no effect. oradim.log (in %OracleHome%\database\oradim.log) says: Thu Jun 10 14:14:48 2010 C:\oracle\product\10.2.0\db_3\bin\oradim.exe -startup -sid orcl -usrpwd * -log oradim.log -nocheck 0 Thu Jun 10 14:14:48 2010 ORA-12560: TNS:protocol adapter error sqlnet.log in the same folder has: Fatal NI connect error 12560, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.2.0\db_3\bin\oradim.exe)(HOST=ORACLE-VM)(USER=SYSTEM)))) VERSION INFORMATION: TNS for 32-bit Windows: Version 10.2.0.1.0 - Production Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production Time: 10-JUN-2010 14:14:48 Tracing not turned on. Tns error struct: ns main err code: 12560 TNS-12560: TNS:protocol adapter error ns secondary err code: 0 nt main err code: 530 TNS-00530: Protocol adapter error nt secondary err code: 2 nt OS err code: 0 The ORA_ORCL_AUTOSTART registry value is set to TRUE, so it should be auto-starting - and you can see that it's trying to. The problem also occurs when stopping and restarting the OracleServiceORCL service. I've enabled SQL*Net tracing which shows: [10-JUN-2010 15:09:33.919] snlpcss: entry [10-JUN-2010 15:09:34.419] snlpcss: Unable to spawn Oracle oracle (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq))) orcl, error 2. [10-JUN-2010 15:09:34.419] snlpcall: exit On a hunch that error 2 is Windows error 2 (file not found) I tried restarting the service with Process Monitor watching oradim.exe, but this appears to delay things just enough that it always works. Right now I have a horrible hack where I've created a Scheduled Task to run oradim -startup -sid ORCL when the Administrator account logs on, and set the VM to auto-logon. I'd still like to work out why it's not working.

  Read the article

• Damaged partition after disk image

  - by Charles Gargent

  I am trying to clone/backup a disk with Windows 7 Pro 64bit on it. First I tried Easus Todo Backup and used disk clone option without sector by sector copy. I then plugged in the new drive and I get the following error. "Invalid or damaged Bootable partition" I then plugged the old drive back in and I am greeted with the same error. My next step was to try the sector by sector disk clone, but still I get the same error. I have tried fixing the mbr with the windows disk but that makes no difference. I have tried some other free tools and I get the same error. I have tried this on a different machine running Windows 7 Enterprise 32bit without this problem. I have done some searching and the only thing I can come up with is this post from the Acronis forums http://forum.acronis.com/forum/8254 suggesting that the bios is reading my disk geometry incorrectly. Can anyone shed any light on this, is there a way I can fix this either in the bios or repair the mbr every time I reimage it?

  Read the article

• Windows 7 XP Mode-Program not ending properly

  - by iceman33

  We currently have recently have implemented a few new machines to our network with Windows 7 Enterprise 64-bit installed on them. We have a program that is incompatible with Windows 7 right now and we have it installed on the Windows XP Mode that we have setup on there. There is a shortcut that is on the desktop to have it work with integration services and that part is working successfully. Occasionally, this program will stop working over the server on which it connects to has to get rebooted and the program has to get closed out. However, that process that is in the task manager doesn't seem to close out properly. So in order to correctly get the program shut down, we have to make the users log back into xp mode and do a Ctrl+Alt+Delete to kill the process or have to go back into the machine to perform a restart. I was wondering if anyone has come across a way within XP Mode yet that when the virtual machine goes into hibernation mode that it would shut down all processes or if when restarting the virtual machine your normal machine that it would shut everything down in the virtual XP mode as well and not just keep that program running? Any help would be greatly appreciated.

  Read the article

• MySQL Config on Large Machine

  - by Jonathon

  We have a Windows 2003 Enterprise Edition server (64bit) running only MySQL 5.1.45 64-bit. It has 16G RAM and 10T of hard-drive space in RAID 10. We are having horrible performance from mysqld (85-100% CPU utilization). We were running a smaller machine with better performance, so I am assuming our my.ini file is not correct for our current machine. The my.ini file is as follows: [client] port=3306 [mysql] default-character-set=latin1 [mysqld] port=3306 basedir="D:/MySQL/" datadir="D:/MySQL/data" default-character-set=latin1 default-storage-engine=MYISAM sql-mode="" skip-innodb skip-locking max_allowed_packet = 1M max_connections=800 myisam_max_sort_file_size=5G myisam_sort_buffer_size=500M table_open_cache = 512 table_cache=8000 tmp_table_size=30M query_cache_size=50M thread_cache_size=128 key_buffer_size=3072M read_buffer_size=2M read_rnd_buffer_size=16M sort_buffer_size=2M #replication settings (this is the master) log-bin=log server-id = 1 Does anyone see anything wrong with this setup? For a machine with this much RAM, why in the world would mysqld eat up so much CPU? I know we can optimize some queries, etc., but it did run okay on a smaller machine, so I am pretty sure it is the config. Thanks in advance for any help.

  Read the article

• Can I format a Veritas cluster shared volume from windows?

  - by spaghettidba

  We have a Microsoft Failover Cluster with dynamic disks managed by Veritas Storage Foundation. Today the sysadmins added a new disk for SQL Server but the cluster size on the volume was wrong, so I issued a quick format to change it. The disk volume failed, the SQL Server group failed as well and the cluster became unresponsive. After some minutes I managed to fail over to a passive node. The SAN admins say it's my fault because I shouldn't have formatted the disk from the Windows format applet, but I should have used Veritas Enterprise Administrator instead. Can a format operation bring offline a whole cluster group this way? Relevant error messages: From the eventlog: The cluster resource host subsystem (RHS) stopped unexpectedly. An attempt will be made to restart it. This is usually due to a problem in a resource DLL. Please determine which resource DLL is causing the issue and report the problem to the resource vendor. From the cluster.log ERR [RCM] rcm::RcmResControl::DoResourceControl: ERROR_RESOURCE_CALL_TIMED_OUT(5910)' because of 'Control(STORAGE_GET_DISK_INFO_EX) to resource 'NameOfTheDiskGroup' timed out.' Veritas Documentation: Excerpt from Symantec's documentation: Note: Before manually creating the resource, you must format the cluster-shared volume with NTFS using the VEA GUI and mount it on the node where you are trying to create the resource. Does this mean the disk cannot be formatted from Windows? I don't read it that way. For the record, I formatted many disks using the Windows applet in the past and nothing bad happened.

  Read the article

• MD RAID 1 with external bitmap doesn't fully resync

  - by user64744

  I have an interesting configuration: dual boot system with a RAID 1 that needs to be visible in both Windows and Linux. The Windows install is Win 7 Enterprise, and the Linux install is Kubuntu 10.04. To get the RAID to work, I set it up using Windows's "Dynamic Disks" RAID 1, and brought it up in Linux using MD with no persistent superblock, and a write-intent bitmap on another partition. (Without this bitmap, MD had no way of knowing that the array was in sync, and would do a complete resync every time the array started.) The array is assembled like so: mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 I expected that the first time I ran this command, it would resync the array, write out a bitmap with no dirty chunks, and all would be good. This wasn't the case: after completing the resync, the bitmap was mostly clean, but about 5% dirty blocks remained, as revealed by mdadm -X /var/local/md1.bitmap I didn't mount the filesystem on /dev/md1 or touch it in any other way. I then found that stopping and restarting the array: mdadm --stop /dev/md1 mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 did indeed read in the bitmap, with an ensuing resync that went quickly because most of the blocks were marked clean. The confusing part is that this resync further reduced the number of dirty blocks, but still did not remove all of them. By repeatedly stopping and restarting I could slowly bring the dirty block count down to around 0.6%, where it seemed to level out. Any ideas what could be causing this? It smells to me of a race condition somewhere that leads to blocks either being skipped over during synchronization or not properly cleared from the bitmap, but I really have no evidence to prove this. It doesn't look like hardware issues since both drives are new and have zero read errors and reallocated sectors reported by smartctl -a.

  Read the article

• Paid antivirus solutions for Windows

  - by AP Erebus

  NOTE: If your looking for recommendations on free antivirus, check this question: http://superuser.com/questions/2/free-antivirus-solutions-for-windows Much like the above, I'm curious to opinions on the best PAID antivirus solution, personal or commercial. Enterprise solutions are welcome and as much detail regarding costs is welcome. Personally I'm looking for a licence that will grant me more than 1 computer install and quality technical support, for personal use. as in the free antivirus question: See if your antivirus of choice is already listed. Chances are it is. If you spot an answer that mentions one you already use, vote that up if you think it's a good solution. If you know of a feature or drawback not listed, or can include experiences in dealing with it, please edit the answer accordingly. If you know of any that can also be used at work please point this out. This covers all Windows platforms from XP, Vista and Windows 7. If you see an existing entry that needs an update or to add your testimonial, please do.

  Read the article

• Why won't IIS serve my website? - 404 Page Not Found

  - by Giffyguy

  Built a brand new server, with a fresh copy of Windows Server 2003 Enterprise x86 Edition. Installed the .NET Framework 1.1, 2.0, 3.5, and 4.0 Added the "Domain Controller" and "Application Server" roles. Created a new website, pointed it to a local directory: C:\Inetpub\angryoctopus.net\ Added the appropriate headers: angryoctopus.net, www.angryoctopus.net, TCP port 80, all IPs Moved the website content into the local directory. Configured the default document in IIS: Default.aspx Enabled ASP.NET for this website, and set it to the correct version: 2.0.50727 Configured the zone angryoctopus.net in DNS. Tested DNS lookup here to ensure DNS was functional. Opened website in VS 2008 and re-built (and debugged) to ensure the content was functional. I can clearly see that IIS is responding normally, by browsing directly to my server's IP address. Since this does not use the angryoctopus HTTP header, the default website is displayed instead: the "Under Construction" page. And yet, after all of this, angryoctopus.net still returns 404. Does anybody know what could be wrong? What troubleshooting steps have I forgotten? Is there a command-line diagnostic that might provide more information?

  Read the article

• Cannot connect to windows server by name over vpn connection

  - by ErocM

  I have a rented dedicated windows server on a public ip that is acting as a SQL Server and VPN server. I need to connect to this server via computer name to get replication in place. I cannot use an ip address due to this issue: So, due to this, we are going the VPN route. That is my primary issue: After I am connected to this server's vpn, I can connect to SQL Server using the ip address but I cannot connect by the computer's name as you can see below... Right now, there is no hardware firewall on it since I had it removed to test this issue. I am running Windows 2008 Enterprise Server as the VPN server. I am not sure if the route print will help any from the workstation trying to connect but here is the info: IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 10.0.0.0 255.0.0.0 10.0.0.1 10.0.0.2 21 10.0.0.2 255.255.255.255 On-link 10.0.0.2 276 Any other info needed? Thanks for the help! ========= CLARIFICATION ON A FEW THINGS #1 ========= This is the server's info: This is the workstation that is trying to connect: I connect to the server via "Control Panel\Network and Internet\Network and Sharing Center\Connect or Disconnect" You can see here that I am connected: ========= CLARIFICATION ON A FEW THINGS #2 ========= I've tried to connect directly to the Sql Server as I did above but with the computers name and I couldn't get to it. Here I am trying to net view it from the workstation and it couldn't find it:

  Read the article

• Window 7 Computer name changing on its own?

  - by DC

  Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

  Read the article

• Backing up SQL NetApp Snapshots using TSM

  - by WerkkreW

  In our environment we have a 3 node SQL 2005 Cluster which is on NetApp storage. We are currently using SMSQL (NetApp SnapManager for SQL) to take Snapshot backups of the data. This works great, but due to some audit requirements we are also forced to maintain some copies on tape. We have used NDMP in other places across the enterprise but we do not want to use it in this specific instance. Basically what I need to do is, get the most recent snapshot copy of the databases on tape, via Tivoli Storage Manager (TSM). What I have done is, obtained a basic Windows Server 2003 VM with SnapDrive installed, which is SAN attached and zoned to the NetApp, and I have written a batch file to do the following: Mount the latest __RECENT snapshot lun to the host, using a specific drive letter Perform a TSM based incremental backup Dis-mount the LUN This seems to work fine, except sometimes the LUN's do not mount due to some sort of timeout. Also, due to my limited knowledge of windows batch scripting, I have no way to monitor the success or failure of these backups since I do not know how to send a valid return code back to the TSM scheduling service. Is there a more efficient/elegant way to accomplish this without NDMP?

  Read the article

• Configuring https access on HP A5120 Switch

  - by GerryEgan

  I am trying to configure HTTPS management on a HP a5120 switch running Version 5.20.99, Release 2215 and not having much luck. I have followed the manual by creating an SSL policy first and then enabling the HTTPS server with the SSL policy: ssl server-policy sslpol ip https ssl-server-policy sslpol ip https enable When I try and log onto the switch with Google Chrome I get the following error: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. When I look this up I have found references to errors due to TLS being used in SSL. I can find no way to specify the SSL version in the server policy. The manual has a configuration example that uses MSCEP to retrieve a certificate but in Windows 2008 R2 that feature is only available in Enterprise and Datacentre editions which I don't have. I have SSH configured and it is using a locally generated certificate so I'm not sure if I can use that but I'd like to if possible. Has anybody been able to setup HTTPS management on HP A series switches without MSCEP? Any and all help appreciated! here is a copy of my config with the interfaces removed: version 5.20.99, Release 2215 # sysname MYSYSNAME # irf domain 10 irf mac-address persistent timer irf auto-update enable undo irf link-delay # domain default enable system # telnet server enable # vlan 1 # vlan 100 description Management # radius scheme system primary authentication 127.0.0.1 1645 primary accounting 127.0.0.1 1646 user-name-format without-domain # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher authorization-attribute level 3 service-type ssh telnet terminal service-type web # stp enable # ssl server-policy sslpol pki-domain MYDOMAIN # interface NULL0 # interface Vlan-interface199 ip address 192.168.199.140 255.255.255.0 # interface GigabitEthernet1/0/1 poe enable stp edged-port enable # interface Ten-GigabitEthernet2/1/2 # dhcp-snooping # ntp-service unicast-server 192.168.1.71 # ssh server enable # ip https ssl-server-policy sslpol ip https enable # load xml-configuration # user-interface aux 0 1 user-interface vty 0 15 authentication-mode scheme

  Read the article

• Updating Samba From RPMs

  - by KnickerKicker

  My Red Hat Enterprise Edition 4 comes with Samba Version 3.0.10, which does not have support for the "inherit owner" attribute that is essential in implementing a Deny-Delete Write Once Read Many share (for examples, search google for a-shared-drop-box-using-samba). (BTW, if any body knows an alternative way to do it without updating samba, I'm all ears!) I am not all that comfortable building from source, and after hours of googling (no, I do not have a red hat subscription, so I cannot just run the up2date command), I found a whole bunch of rpms on http://ftp.sernet.de/pub/samba/tested/rhel/4/i386/ (Samba 3.2.15 for RHEL 4)... Next, I tried updating them with the rpm -U --nodeps command, but I got file conflict errors. So I went ahead and overwrote everything (or so I thought) by using the rpm's --force option. But no good has come of all that. /usr/sbin/smbd -V still returns the old version. As of now, rpm -qa | grep samba returns, samba3-client-3.2.15-40.el4 samba-3.0.10-1.4E.2 samba-client-3.0.10-1.4E.2 system-config-samba-1.2.21-1 samba3-3.2.15-40.el4 samba-common-3.0.10-1.4E.2 samba3-winbind-3.2.15-40.el4 I cannot remove the older ones because samba-common >= 3.0.8-0.pre1.3 is needed by (installed) gnome-vfs2-smb-2.8.2-8.2.x86_64 libsmbclient.so.0()(64bit) is needed by (installed) kdebase-3.3.1-5.8.x86_64 libsmbclient.so.0()(64bit) is needed by (installed) gnome-vfs2-smb-2.8.2-8.2.x86_64 Now thats a whole bunch of dependencies that I dare not touch :) Any and all pointer are welcome at this stage. Thanks in advance!

  Read the article

• Why does Outlook 2007 lose connection to Exchange when Windows 7 64-bit turns off display?

  - by Greg R.

  The problem: When Windows 7 puts the display to sleep, Outlook 2007 and also Microsoft Office Communicator 2005 lose the connection to the Exchange server. When I unlock the computer, Outlook is logged out of Exchange and prompts me for credentials (although usually I have to restart Outlook to get it to reconnect). The network connection is still active, e.g. other applications don't lose their connection to the network or Internet when Windows 7 puts the display to sleep. I'm using a Dell E5400 notebook running Windows 7 Enterprise 64-bit with Outlook 2007 connecting to a corporate Exchange server (not sure if it's Exchange 2007 or 2010). The Dell is typically docked and connected via DVI (through the dock) to two Dell monitors. The Power Options in Windows 7 are set as follows: Turn Off The Display: 15 minutes Put The Computer To Sleep: never Those are the "Plugged In" settings but the problematic behavior is the same when running on battery. When Windows 7 turns off the display, it automatically locks the computer. E.g., I have to re-enter my credentials to access the machine. This is per corporate policy. The equivalent set up on my previous Dell notebook running Windows XP SP3 did not result in this problem with Outlook 2007 or Office Communicator 2005 connecting the very same exchange server. The problem began when I switched to the new Dell E5400 with Windows 7.

  Read the article

• Windows Server - share files without access for administrator

  - by Pawel

  We have a MS Windows Server 2008 R8 based server that is administrated by our IT department. We would like to achieve two things simultaneously: A folder on the server, containing several thousand files (new files added frequently) that is accessible to some ActiveDirectory users (e.g. board of directors) but is not accessible by IT department employees IT department employees still maintain rights to administrate the server, including installing new software and services We already checked some solutions: Using NTFS access rights. Unfortunately IT (members of "Administrators" group) can set themselves as new owners of the files and change the permissions so that they gain access to the files. Enabling EFS. Unfortunately even if you do not allow IT to access files, they still can disable EFS completely because they have administrative rights. Moreover as far as I know you have to manually add permissions for all users but the owner for each new file - very inconvenient. Creating a new role for the IT department that has all the privileges apart from taking ownership of files. Unfortunately if you're not a member of the Administrators group, you cannot install new software, no matter what privileges you add to the role. TrueCrypt - nice free encryption software, but with poor sharing capabilities. You can either mount an encryption container on the server (and then IT has access to its contents) or you mount them locally but only one user can mount it for writing. AxCrypt - free encryption software that enables file-by-file encryption on the server. There are some disadvantages though - you have to manually encrypt each new file added. The files have their extensions changes. You can only set one password for all files (so all users have to know this one password). Any other ideas? Our budget is limited so enterprise-class software from Symantec or PGP would probably be not an option.

  Read the article

• How can I batch convert SVG files containing text to PDF files (specifically on CentOS 5.3 x86_64)?

  - by molecules

  I would like to programatically convert SVG files to PDF files. However, the SVG files contain text that must be searchable in the generated PDF files. Also, it has to work on Red Hat Enterprise Linux 5.3 or CentOS 5.3 for the x86_64 architecture. It would be nice if it were Open Source or at least not very expensive. Here is what I've tried. All of these, except Batik, work fine on Debian Lenny. Inkscape I can get it installed using autopackages from http://inkscape.modevia.com/ap, but when I use it from the command line, the text is not searchable. Batik rasterizer [sic] When it converts SVG files to PDF files, the text is no longer searchable. svg2pdf The source for this and several of its dependencies are available to download. I have been trying to get it to compile on CentOS, but haven't had success yet. I found a precompiled version for Debian x86_64, but it doesn't work on CentOS. rsvg-convert Generated PDF isn't searchable on CentOS 5.3. Perhaps installing a newer version of cairo would help. Thanks to DaveParillo for mentioning rsvg-convert (on superuser). SOLUTION (but perhaps some of the above will still be useful to the reader) princeXML It works fine on CentOS when installed from source. For some reason it doesn't work when installed from the .rpm. Thanks Erik Dahlström! (provided solution that worked for my case on stackoverflow) Cross posted on stackoverflow

  Read the article

• The great Vanishing Act of INetMgr.exe on my Windows 7 x64 system

  - by marc_s

  I'm facing an odd issue with the IIS Manager on Windows 7 (x64). At home, I have Win7 Professional, and when I check my IIS manager icon in the start menu, I see it links to %windir%\system32\inetsrv\InetMgr.exe When I launch this from the command line, it works like a charm. At work, however, I have Windows 7 Enterprise (x64), and when I check my link in the start menu, the entry is exactly the same. If I click on it - it works like a charm. Now if I'd like to launch it from the command line (cmd.exe or TakeCommand), however - the file just isn't there - a DIR %windir%\system32\inetsrv\*.exe shows a number of files, including a "inetmgr6.exe" - but no "inetmgr.exe" - and of course, I can't launch it either :-( Strangely enough, when I look at the directory %windir%\system32\INetSrv in Windows Explorer or Windows Powershell, I SEE the INetMgr.exe file and I can launch it - no problem. What the **** is going on here? How can I find the INetMgr.exe from my classic command line and launch it from there?? UPDATE: ok, some updates. On my work laptop, the INetMgr.exe file appears to really be located in a directory called c:\windows\syswow64\inetsrv (I'm recalling from memory, so don't quote me on the directory name - something like that). I can see this if I search for it in e.g. Powershell or Windows 7 Explorer. However, from a "classic" command line like cmd.exe, it appears to be in c:\windows\system32\inetsrv ..... hmmm.... trouble is - even though I now know where the file really is, I cannot access that directory from my classic command line - not even if I'm running cmd.exe as admin with elevated privileges....... so I know where the file is, but that still doesn't solve my problem :-(

  Read the article

• Online computer not responding to pings

  - by mastercork889

  I was doing a bit of scanning on my network lately, knew all the hostnames to each computer connected. But whilst pinging one of them ping returned Request timed out.. This is strange as I know the computer is online and that the computer responds correctly to pinging on a different (enterprise) network. Is there something on the computer, my network, or my computer that is bugging with this? - That's just a sub-question, I don't expect this to be the main answer. The real question: Why does this happen? Why does pinging the IP4 address not work? EDIT : Pinging the Hostname used to default to the IP4 address, but now it defaults to the IP6 address. Why does this happen? But now that it pings using IP6, how come it all of a sudden works? > ping -6 THE_COMPUTER Pinging THE_COMPUTER [lengthy IP6 address] with 32 bytes of data: Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Reply from [lengthy IP6 address]: time=1ms Ping stats: Sent = 4, Recieved = 4, Lost = 0 (0% loss) But when this is done using IP4 it doesn't work. So there are now two questions: How come IP6 works and not IP4? Why does IP4 not work?

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >