Search Results

Search found 10798 results on 432 pages for 'port scanning'.

Page 196/432 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

  • Can't connect to smtp (postfix, dovecot) after making a change and trying to change it back

    - by UberBrainChild
    I am using postfix and dovecot along with zpanel and I tried enabling SSL and then turned it off as I did not have SSL configured yet and I realized it was a bit stupid at the time. I am using CentOS 6.4. I get the following error in the mail log. (I changed my host name to "myhostname" and my domain to "mydomain.com") Oct 20 01:49:06 myhostname postfix/smtpd[4714]: connect from mydomain.com[127.0.0.1] Oct 20 01:49:16 myhostname postfix/smtpd[4714]: fatal: no SASL authentication mechanisms Oct 20 01:49:17 myhostname postfix/master[4708]: warning: process /usr/libexec/postfix/smtpd pid 4714 exit status 1 Oct 20 01:49:17 amyhostname postfix/master[4708]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Reading on forums and similar questions I figured it was just a service that was not running or installed. However I can see that saslauthd is currently up and running on my system and restarting it does not help. Here is my postfix master.cf # # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup submission inet n - - - - smtpd -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp smtps inet n - - - - smtpd # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} And here is dovecot ## ## Dovecot config file ## listen = * disable_plaintext_auth = no protocols = imap pop3 lmtp sieve auth_mechanisms = plain login passdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } userdb { driver = sql } userdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } mail_location = maildir:/var/zpanel/vmail/%d/%n first_valid_uid = 101 #last_valid_uid = 0 first_valid_gid = 12 #last_valid_gid = 0 #mail_plugins = mailbox_idle_check_interval = 30 secs maildir_copy_with_hardlinks = yes service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } service lmtp { unix_listener lmtp { #mode = 0666 } } service imap { vsz_limit = 256M } service pop3 { } service auth { unix_listener auth-userdb { mode = 0666 user = vmail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0666 user = vmail group = mail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 0 vsz_limit = 64M } service managesieve { } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes protocol lda { mail_plugins = quota sieve postmaster_address = [email protected] } protocol imap { mail_plugins = quota imap_quota trash imap_client_workarounds = delay-newmail } lmtp_save_to_detail_mailbox = yes protocol lmtp { mail_plugins = quota sieve } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol sieve { managesieve_max_line_length = 65536 managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 } dict { quotadict = mysql:/etc/zpanel/configs/dovecot2/dovecot-dict-quota.conf } plugin { # quota = dict:User quota::proxy::quotadict quota = maildir:User quota acl = vfile:/etc/dovecot/acls trash = /etc/zpanel/configs/dovecot2/dovecot-trash.conf sieve_global_path = /var/zpanel/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/zpanel/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M #sieve_max_actions = 32 #sieve_max_redirects = 4 } log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log debug_log_path = /var/log/dovecot-debug.log mail_debug=yes ssl = no Does anyone have any ideas or tips on what I can try to get this working? Thanks for all the help EDIT: Output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 delay_warning_time = 4 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = localhost.$mydomain, localhost mydomain = control.yourdomain.com myhostname = control.yourdomain.com mynetworks = all newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES recipient_delimiter = + relay_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-relay_domains_maps.cf sample_directory = /usr/share/doc/postfix-2.2.2/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_use_tls = no smtpd_client_restrictions = smtpd_data_restrictions = reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = smtpd_use_tls = no soft_bounce = yes transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_alias_maps.cf, regexp:/etc/zpanel/configs/postfix/virtual_regexp virtual_gid_maps = static:12 virtual_mailbox_base = /var/zpanel/vmail virtual_mailbox_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_mailbox_maps.cf virtual_minimum_uid = 101 virtual_transport = dovecot virtual_uid_maps = static:101

    Read the article

  • HTTP downloads stop after some time, resuming is not possible

    - by cdauth
    When I try to download a file via HTTP, the downloads sometimes stop after around 30 MB. The download rates goes down to 0 B/s and no data keeps coming. When I stop the download and resume again, the download still hangs. But when I redownload it from byte 0 again, everything works fine up to 30 MB when it stops again. Sometimes, after some hours, it just works again without problems. The position in the file when the download stops is variable, but most of the time it is around 30–35 MB. As a download manager I use wget. The same behaviour happens though using curl and other download managers. The error occurs independently of the server I download from. I have also observed this error on other Linux computers in my network. All computers on my network run Gentoo Linux on x86. All internet connections on my network go through a server on my network which runs a transparent Squid proxy on port 80. That server is connected to a router, which is a Speedport W 700V by Deutsche Telekom AG. That router is connected to the internet using ADSL, with 448 kbit/s down speed and 96 kbit/s up speed. I am almost sure that my transparent proxy is not the problem. I turned that off without resolving the issue. I also connected to the router directly via WLAN without resolving the issue. I also tried to download over another port via HTTP. Furthermore, I tried to download the file using IPv6 with a gateway6 tunnel from my computer, which resulted in exactly the same problem. Now the strange thing is that everything works fine using FTP and HTTPS (also with wget on the same computer). Even more strange: when I resume the download that hanged over HTTP using FTP or HTTPS, download a few bytes that way, stop wget and then resume again using HTTP, it loads data again! But after a few MB, it may stop again. Unfortunately, files downloaded that way are always broken (the MD5 sum is not correct), so at some point, there must have been bogus data. I tried searching for HTML error messages in the downloaded file, but grep -i html does not find anything. (I cannot think of a way to search for GZIP-compressed HTML error messages in the file, so I did not try that.) I tried using strace on wget when it failed to resume a download, you can find the entire output on pastebin. The important lines are repeated every second: clock_gettime(CLOCK_MONOTONIC, {326102, 62176435}) = 0 ) = 1 write(2, "78% [++++++++++++++++++++++++++++"..., 19578% [+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ] 110,683,685 --.-K/s ) = 195 select(4, [3], NULL, NULL, {0, 949999}) = 0 (Timeout) I have absolutely no idea what could be the reason of this problem. It seems like whatever causes the issue speaks HTTP. It seems to speak HTTP that intelligently that it even regognises it in an IPv6-over-IPv4 tunnel. But what could that be and why does it only happen sometimes? The other possibility would be that there is a problem on my computer that is the same on other Gentoo Linux computers as well. Has anyone ever had such a problem? What could be the reason and where do I have to continue investigating to find out more about the issue? Update: I have just run into the problem again and tried to resume the download over the router’s WLAN, and this time it worked. Maybe I did something wrong during my last tests with the WLAN. Now maybe my transparent proxy server is in fact the problem. It is a very basic Squid proxy server that does not cache anything. Maybe the fact is interesting that a second Squid proxy runs on the same computer on another port. Update: A download hung again and this time I turned off all firewall settings and stopped all proxy servers. I failed to resume the download from my network server, which is directly connected to the router. So my proxy server definitely is not the cause the problem. I will try to upgrade the firmware of my router now, although I do not have admin access to it. I will see what I can do.

    Read the article

  • KVM Virtual guest Paused on Reboot

    - by David Hamilton
    I'm running REHL 6 and just installed a Ubuntu Server Guest via KVM set to start at boot. This works correctly and the guest loads, but it loads "paused" and requires that I manually un-pause it. Can someone give me a hint as to how I can I get the Guest OS to actually become active on boot? Here is the libvert dump as requested...Also tried libvert auto-start --- no effect. <domain type='kvm' id='1'> <name>MailServer</name> <uuid>a61dae75-1f5c-d536-718f-3c615d9b4868</uuid> <memory>4194304</memory> <currentMemory>4194304</currentMemory> <vcpu>4</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/home/MailServer/MailServer-1.img'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <alias name='ide0-1-0'/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:cd:f9:9f'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes'/> <sound model='ac97'> <alias name='sound0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='selinux'> <label>system_u:system_r:svirt_t:s0:c211,c271</label> <imagelabel>system_u:object_r:svirt_image_t:s0:c211,c271</imagelabel> </seclabel></domain>

    Read the article

  • sshd running but no PID file

    - by dunxd
    I'm recently started using monit to monitor the status of sshd on my CentOS 5.4 server. This works fine, but every so often monit reports that sshd is no longer running. This isn't true - I am still able to login to the server via ssh, however I note the following: There is no longer any PID file at /var/run/sshd.pid - after a reboot this file exists. Once it is gone, restarting sshd via service sshd restart does not create the PID file. sudo service sshd status reports openssh-daemon is stopped - again, restarting sshd does not change this, but a reboot does. sudo service sshd stop reports failed, presumably because of the missing PID file. Any idea what is going on? Update sudo netstat -lptun gives the following output relating to port 22 tcp 0 0 :::22 :::* LISTEN 20735/sshd Killing the process with this PID as suggested by @Henry and then starting sshd via service results in service sshd status recognising the process by PID again. Would still like to understand this better. RPM verify suggested by a couple of answerers shows this: sudo rpm -vV openssh openssh-server openssh-clients | grep 'S\.5' S.5....T c /etc/pam.d/sshd S.5....T c /etc/ssh/sshd_config /etc/pam.d/sshd has the following contents: #%PAM-1.0 auth include system-auth account required pam_nologin.so account include system-auth password include system-auth session optional pam_keyinit.so force revoke session include system-auth #session required pam_loginuid.so Should that last line be commented out? Update Here's the output of @YannickGirouard 's script: $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 21330 Command line for PID 21330: /usr/sbin/sshd Listing process(es) relating to PID 21330: UID PID PPID C STIME TTY TIME CMD root 21330 1 0 14:04 ? 00:00:00 /usr/sbin/sshd Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ However, I've since got things working by killing the process and starting afresh, as suggested by @Henry below, so perhaps I am no longer seeing the same thing. Will try again if I am seeing the issue again after next reboot. Update - 14 March Monit alerted me that sshd had disappeared, and again I am able to ssh onto the server. So now I can run the script $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 2208 Command line for PID 2208: /usr/sbin/sshd Listing process(es) relating to PID 2208: UID PID PPID C STIME TTY TIME CMD root 2208 1 0 Mar13 ? 00:00:00 /usr/sbin/sshd root 1885 2208 0 21:50 ? 00:00:00 sshd: dunx [priv] Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ Again, when I look for /var/run/sshd.pid I don't find it. $ cat /var/run/sshd.pid cat: /var/run/sshd.pid: No such file or directory $ sudo netstat -anp | grep sshd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2208/sshd $ sudo kill 2208 $ sudo service sshd start Starting sshd: [ OK ] $ cat /var/run/sshd.pid 3794 $ sudo service sshd status openssh-daemon (pid 3794) is running... Is it possible that sshd is restarting and not creating a pidfile for some reason?

    Read the article

  • OpenVPN Server Ethernet Bridging Question

    - by Hooplad
    Hello All, I am having a difficult time properly configuring an ethernet bridge using OpenVPN 2.0.9 install on CentOS 5 ( VPN server ). The goal that I am trying to complete is to connect a VM ( instance running on the same CentOS machine ) acting as a Microsoft Business Contact Manager server. I would then like this "BCM server" to serve Windows XP clients on 192.168.1.0/24 network as well as clients connecting from VPN ( 10.8.0.0/24 ). The setup as it is now was based off a known working configuration. The problem with the working configuration was that it would allow to the client to connect and access everything running on the VPN server ( SVN, Samba, VM Server ) but not any computers on the 192.168.1.0/24 network. I must disclose that the VPN server is behind a router/firewall. Ports are being forwarded correctly ( again, clients were able to connect to the VPN server with no problem. netcat confirms the udp port is open as well ). current ifconfig output br0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 inet addr:192.168.1.169 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:5eff:fe4d:3ac2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:846890 errors:0 dropped:0 overruns:0 frame:0 TX packets:3072351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42686842 (40.7 MiB) TX bytes:4540654180 (4.2 GiB) eth0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:882641 errors:0 dropped:0 overruns:0 frame:0 TX packets:1781383 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82342803 (78.5 MiB) TX bytes:2614727660 (2.4 GiB) Interrupt:169 eth1 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C3 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:650 errors:0 dropped:0 overruns:0 frame:0 TX packets:1347223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67403 (65.8 KiB) TX bytes:1959529142 (1.8 GiB) Interrupt:233 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:17452058 errors:0 dropped:0 overruns:0 frame:0 TX packets:17452058 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94020256229 (87.5 GiB) TX bytes:94020256229 (87.5 GiB) tap0 Link encap:Ethernet HWaddr DE:18:C6:D7:01:63 inet6 addr: fe80::dc18:c6ff:fed7:163/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3086 errors:0 dropped:166 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:315099 (307.7 KiB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01 inet addr:192.168.177.1 Bcast:192.168.177.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08 inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4226 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) current route table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.55.0 * 255.255.255.0 U 0 0 0 vmnet8 192.168.177.0 * 255.255.255.0 U 0 0 0 vmnet1 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 current iptables output Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination server_known_working.conf local banshee port 1194 proto udp dev tap0 ca ca.crt cert banshee_server.crt key banshee_server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 192.168.1.0 255.255.255.0" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 4 The following is the current CentOS server config file. server_ethernet_bridged.conf ( current ) local 192.168.1.169 port 1194 proto udp dev tap0 ca ca.crt cert server.crt key server.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.1.169 255.255.255.0 192.168.1.200 192.168.1.210 push "route 192.168.1.0 255.255.255.0 192.168.1.1" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 6 The following is one of the client's config file that was used with the known working configuration. client.opvn client dev tap proto udp remote XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca client.crt cert client.crt key client.key tls-auth client.key 1 verb 3 I have tried the HOWTO provided by OpenVPN as well as others http://www.thebakershome.net/openvpn%5Ftutorial?page=1 with no success. Any help or suggestions would be appreciated.

    Read the article

  • OpenVPN and PPTP on XEN VPS

    - by amiv
    I have Debian based system (Ubuntu 11.10) on XEN VPS. I've installed OpenVPN and works great. I need to install PPTP too, so did it and clients can connect, but they have no internet on client side. If I connect to VPN over PPTP I can ping and access to only my VPS by its IP, but ony that. There's no "internet" on client side. It looks it's not DNS problems (I'm using 8.8.8.8) because I can't ping known IPs. I bet the solution is simple, but don't have any idea. Any guess? /etc/pptpd.conf option /etc/ppp/pptpd-options logwtmp localip 46.38.xx.xx remoteip 10.1.0.1-10 /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 proxyarp nodefaultroute lock nobsdcomp /etc/ppp/ip-up [...] ifconfig ppp0 mtu 1400 /etc/sysctl.conf [...] net.ipv4.ip_forward=1 Command which I run: iptables -t nat -A POSTROUTING -j SNAT --to-source 46.38.xx.xx (IP of my VPS) The client can connect, first one gets IP 10.1.0.1 and DNS from Google. I bet it's iptables problem, am I right? I'm iptables noob and I don't have idea what's wrong. And here's the ifconfig and route command before client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22671 errors:0 dropped:81 overruns:0 frame:0 TX packets:2266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1813358 (1.8 MB) TX bytes:667626 (667.6 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:100 errors:0 dropped:0 overruns:0 frame:0 TX packets:100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10778 (10.7 KB) TX bytes:10778 (10.7 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And here's the ifconfig and route command after client connect via PPTP: root@vps3780:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default xx.xx.tel.ru 0.0.0.0 UG 100 0 0 eth0 10.1.0.1 * 255.255.255.255 UH 0 0 0 ppp0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 46.38.xx.0 * 255.255.255.0 U 0 0 0 eth0 root@vps3780:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:16:3e:56:xx:xx inet addr:46.38.xx.xx Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::216:xx:xx:dfb6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22989 errors:0 dropped:82 overruns:0 frame:0 TX packets:2352 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1841310 (1.8 MB) TX bytes:678456 (678.4 KB) Interrupt:24 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:12102 (12.1 KB) TX bytes:12102 (12.1 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:46.38.xx.xx P-t-P:10.1.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:66 errors:0 dropped:0 overruns:0 frame:0 TX packets:15 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:10028 (10.0 KB) TX bytes:660 (660.0 B) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:602 errors:0 dropped:0 overruns:0 frame:0 TX packets:612 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:90850 (90.8 KB) TX bytes:418904 (418.9 KB) And ugly iptables --list output: root@vps3780:~# iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- 10.1.0.0/24 anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.1.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable And ugly iptables -t nat -L output: root@vps3780:~# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain INPUT (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- 10.1.0.0/24 anywhere SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx SNAT all -- 10.1.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere SNAT all -- anywhere anywhere to:46.38.xx.xx SNAT all -- 10.8.0.0/24 anywhere to:46.38.xx.xx MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere MASQUERADE all -- anywhere anywhere MASQUERADE all -- 10.1.0.0/24 anywhere As I said - OpenVPN works very good. 10.8.0.0/24 for OpenVPN (on tun0). PPTP won't work. 10.1.0.0/24 for PPTP (on ppp0). Clients can connect, but they haven't "internet". Any suggestions will be appreciated. Second whole day fighting with no results. EDIT: iptables -t filter -F - it resolved my problem :-)

    Read the article

  • How to add addtional disks to a Windows 2008 KVM based Guest?

    - by taazaa
    I have a Win 2008 KVM based guest VM running on a Ubuntu 10 host. It is a raw image of 22G. I want to add a "data" drive which would show up as "D:\" drive on the guest. I first created a raw image using: qemu-img create -f raw ~/vmdisk2.img 50G Then, tried attaching it using virsh attach-disk. When that did not work, I tried editing the xml file of the VM directly. Both did not seem to work. I would greatly appreciate any help on how to do this and what the best practice is. I want to keep the base image small, so that I can clone it (hopefully) and then attach necessary storage based on the application at hand. Update: The xml of the vm before adding the second drive: <domain type='kvm'> <name>win08e-vm1</name> <uuid>183a4ba0-1c0b-0b04-ad01-aa7c3a4cb390</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/win08e-vm1.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <source file='/home/taazaa/iso/Win08ER264.iso'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:7f:a7:ae'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes' keymap='en-us'/> <video> <model type='vga' vram='9216' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> </domain> Thanks!

    Read the article

  • Accessing mySQL from two ports: Problems with iptables

    - by marekventur
    Hi! I'm trying to make my mySQL-server (running on Ubuntu) listen on port 3306 and 110, because I would like to access it from a network with very few open ports. So far I've found this answer telling me to do iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 110 -j REDIRECT --to-port 3306 but all I got is: # mysql -h mydomain.com -P 3306 -u username --password=xyz Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 68863 Server version: 5.0.75-0ubuntu10.5 (Ubuntu) Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> exit Bye # mysql -h mydomain.com -P 110 -u username --password=xyz ERROR 2003 (HY000): Can't connect to MySQL server on 'mydomain.com' (111) I'm not an expert with iptables, so I not sure where to look for the problem. I'm googling around for quite some time, but haven't found anything to help me yet. This is what iptable tells me: # iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 32M packets, 1674M bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- eth0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 redir ports 3306 Chain POSTROUTING (policy ACCEPT 855K packets, 55M bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 837K packets, 54M bytes) pkts bytes target prot opt in out source destination # iptables -L -n -v Chain INPUT (policy DROP 7 packets, 340 bytes) pkts bytes target prot opt in out source destination 107K 5390K LOG all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID limit: avg 2/sec burst 5 LOG flags 0 level 4 prefix `INPUT INVALID ' 131K 6614K DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 0 0 MY_DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x3F/0x00 0 0 MY_DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x03/0x03 0 0 MY_DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x06 0 0 MY_DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x05/0x05 0 0 MY_DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x11/0x01 0 0 MY_DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x18/0x08 0 0 MY_DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:0x30/0x20 6948K 12G ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 151M 34G ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 32M 1666M ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 1833 106K ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 603 29392 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 1 60 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:465 24 1180 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 1 60 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:995 7919 400K ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:143 1 60 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:993 0 0 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:119 1 60 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53 7 517 ACCEPT udp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:53 1110 65364 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21 139K 8313K ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 10176 499K ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:3306 2 80 ACCEPT udp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:123 0 0 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:6060 4 176 ACCEPT tcp -- venet0 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:6667 20987 1179K MY_REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 2159 284K LOG all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID limit: avg 2/sec burst 5 LOG flags 0 level 4 prefix `OUTPUT INVALID ' 2630 304K DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 6948K 12G ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 181M 34G ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW,RELATED,ESTABLISHED 0 0 MY_REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MY_DROP (7 references) pkts bytes target prot opt in out source destination 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 2/sec burst 5 LOG flags 0 level 4 prefix `PORTSCAN DROP ' 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MY_REJECT (2 references) pkts bytes target prot opt in out source destination 13806 652K LOG tcp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 2/sec burst 5 LOG flags 0 level 4 prefix `REJECT TCP ' 18171 830K REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 reject-with tcp-reset 912 242K LOG udp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 2/sec burst 5 LOG flags 0 level 4 prefix `REJECT UDP ' 912 242K REJECT udp -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable 1904 107K LOG icmp -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 2/sec burst 5 LOG flags 0 level 4 prefix `DROP ICMP ' 1904 107K DROP icmp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 LOG all -- * * 0.0.0.0/0 0.0.0.0/0 limit: avg 2/sec burst 5 LOG flags 0 level 4 prefix `REJECT OTHER ' 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-proto-unreachable Is there anyone who can give ma a hint where to look for the problem? Thank you!

    Read the article

  • boost::asio::async_read_until problem

    - by user368831
    Hi again, I'm modify the boost asio echo example to use async_read_until to read the input word by word. Even though I am using async_read_until all the data sent seems to be read from the socket. Could someone please advise: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, buffer, ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { std::ostringstream ss; ss<<&buffer; std::string s = ss.str(); std::cout<<s<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(s), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { std::cout<<"handling write"<<std::endl; if (!error) { } else { delete this; } } private: tcp::socket socket_; boost::asio::streambuf buffer; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } Thanks!

    Read the article

  • boost::asio::async_read_until problem

    - by user368831
    I'm trying to modify the echo server example from boost asio and I'm running into problem when I try to use boost::asio::async_read_until. Here's the code: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, boost::asio::buffer(data_, max_length), ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { std::cout<<"handling read"<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { /* socket_.async_read_some(boost::asio::buffer(data_, max_length), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); */ } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } The problem is when I try to compile I get this weird error: server.cpp: In member function ‘void session::start()’: server.cpp:27: error: no matching function for call to ‘async_read_until(boost::asio::basic_stream_socket &, boost::asio::mutable_buffers_1, char, boost::_bi::bind_t, boost::_bi::list3, boost::arg<1 ()(), boost::arg<2 ()() )’ Can someone please explain what's going on? From what I can tell the arguments to async_read_until are correct. Thanks!

    Read the article

  • Need help with setting up comet code

    - by Saif Bechan
    Does anyone know off a way or maybe think its possible to connect Node.js with Nginx http push module to maintain a persistent connection between client and browser. I am new to comet so just don't understand the publishing etc maybe someone can help me with this. What i have set up so far is the following. I downloaded the jQuery.comet plugin and set up the following basic code: Client JavaScript <script type="text/javascript"> function updateFeed(data) { $('#time').text(data); } function catchAll(data, type) { console.log(data); console.log(type); } $.comet.connect('/broadcast/sub?channel=getIt'); $.comet.bind(updateFeed, 'feed'); $.comet.bind(catchAll); $('#kill-button').click(function() { $.comet.unbind(updateFeed, 'feed'); }); </script> What I can understand from this is that the client will keep on listening to the url followed by /broadcast/sub=getIt. When there is a message it will fire updateFeed. Pretty basic and understandable IMO. Nginx http push module config default_type application/octet-stream; sendfile on; keepalive_timeout 65; push_authorized_channels_only off; server { listen 80; location /broadcast { location = /broadcast/sub { set $push_channel_id $arg_channel; push_subscriber; push_subscriber_concurrency broadcast; push_channel_group broadcast; } location = /broadcast/pub { set $push_channel_id $arg_channel; push_publisher; push_min_message_buffer_length 5; push_max_message_buffer_length 20; push_message_timeout 5s; push_channel_group broadcast; } } } Ok now this tells nginx to listen at port 80 for any calls to /broadcast/sub and it will give back any responses sent to /broadcast/pub. Pretty basic also. This part is not so hard to understand, and is well documented over the internet. Most of the time there is a ruby or a php file behind this that does the broadcasting. My idea is to have node.js broadcasting /broadcast/pub. I think this will let me have persistent streaming data from the server to the client without breaking the connection. I tried the long-polling approach with looping the request but I think this will be more efficient. Or is this not going to work. Node.js file Now to create the Node.js i'm lost. First off all I don't know how to have node.js to work in this way. The setup I used for long polling is as follows: var sys = require('sys'), http = require('http'); http.createServer(function (req, res) { res.writeHead(200, {'Content-Type': 'text/html'}); res.write(new Date()); res.close(); seTimeout('',1000); }).listen(8000); This listens to port 8000 and just writes on the response variable. For long polling my nginx.config looked something like this: server { listen 80; server_name _; location / { proxy_pass http://mydomain.com:8080$request_uri; include /etc/nginx/proxy.conf; } } This just redirected the port 80 to 8000 and this worked fine. Does anyone have an idea on how to have Node.js act in a way Comet understands it. Would be really nice and you will help me out a lot. Recources used An example where this is done with ruby instead of Node.js jQuery.comet Nginx HTTP push module homepage Faye: a Comet client and server for Node.js and Rack To use faye I have to install the comet client, but I want to use the one supplied with Nginx. Thats why I don't just use faye. The one nginx uses is much more optimzed. extra Persistant connections Going evented with Node.js

    Read the article

  • boost::asio::async_write problem

    - by user368831
    Hi, I'm trying to figure out how asynchronous reads and writes work in boost asio by manipulating the echo example. Currently, I have a server that should, when sent a sentence, respond with only the first word. However, the boost::asio::async_write never seems to complete even though the write handler is being called. Can someone please explain what's going on? Here's the code: #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { std::cout<<"starting"<<std::endl; boost::asio::async_read_until(socket_, buffer, ' ', boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { // std::ostringstream ss; // ss<<&buffer; char* c = new char[bytes_transferred]; //std::string s; buffer.sgetn(c,bytes_transferred); std::cout<<"data: "<< c<<" bytes: "<<bytes_transferred<<std::endl; if (!error) { boost::asio::async_write(socket_, boost::asio::buffer(c,bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); } else { delete this; } } void handle_write(const boost::system::error_code& error) { std::cout<<"handling write"<<std::endl; if (!error) { } else { delete this; } } private: tcp::socket socket_; boost::asio::streambuf buffer; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } Thanks!

    Read the article

  • 'normal' SVC versus 'Silverlight' SVC (WCF)

    - by Michel
    Hi, i'm trying to call a WCF service from my Silverlight 3 app. But... when trying to create a 'silverlight enabled wcf service' in my web project, my VS2008 crashes during creating the item (i think while editing the web.config). So i thought: let's create a 'normal' wcf service, and manually edit it to be a 'silverlight enabled webservice'. So i wondered what the differences are, and second: why is there a difference between a service called from a silverlight app and a non-silverlight app? This is what i have now for the binding (i have a service without an Interface contract, just a direct class exposed, to begin with): <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="RadControlsSilverlightApp1.Web.GetNewDataBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> <bindings> <customBinding> <binding name="customBinding0"> <binaryMessageEncoding /> <httpTransport /> </binding> </customBinding> </bindings> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <services> <service behaviorConfiguration="RadControlsSilverlightApp1.Web.GetNewDataBehavior" name="RadControlsSilverlightApp1.Web.GetNewData"> <endpoint address="" binding="customBinding" bindingConfiguration="customBinding0" contract="RadControlsSilverlightApp1.Web.GetNewData" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> </service> </services> </system.serviceModel> This one doesn't work because when i add a reference to it from the silverlight app i get these messages: Warning 2 Custom tool warning: Cannot import wsdl:portType Detail: An exception was thrown while running a WSDL import extension: System.ServiceModel.Description.DataContractSerializerMessageContractImporter Error: Exception has been thrown by the target of an invocation. XPath to Error Source: //wsdl:definitions[@targetNamespace='']/wsdl:portType[@name='GetNewData'] C:\Silverlight\RadControlsSilverlightApp1\RadControlsSilverlightApp1\Service References\ServiceReference1\Reference.svcmap 1 1 RadControlsSilverlightApp1 Warning 3 Custom tool warning: Cannot import wsdl:binding Detail: There was an error importing a wsdl:portType that the wsdl:binding is dependent on. XPath to wsdl:portType: //wsdl:definitions[@targetNamespace='']/wsdl:portType[@name='GetNewData'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='CustomBinding_GetNewData'] C:\Silverlight\RadControlsSilverlightApp1\RadControlsSilverlightApp1\Service References\ServiceReference1\Reference.svcmap 1 1 RadControlsSilverlightApp1 Warning 4 Custom tool warning: Cannot import wsdl:port Detail: There was an error importing a wsdl:binding that the wsdl:port is dependent on. XPath to wsdl:binding: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:binding[@name='CustomBinding_GetNewData'] XPath to Error Source: //wsdl:definitions[@targetNamespace='http://tempuri.org/']/wsdl:service[@name='GetNewData']/wsdl:port[@name='CustomBinding_GetNewData'] C:\Silverlight\RadControlsSilverlightApp1\RadControlsSilverlightApp1\Service References\ServiceReference1\Reference.svcmap 1 1 RadControlsSilverlightApp1 Warning 5 Custom tool warning: No endpoints compatible with Silverlight 3 were found. The generated client class will not be usable unless endpoint information is provided via the constructor. C:\Silverlight\RadControlsSilverlightApp1\RadControlsSilverlightApp1\Service References\ServiceReference1\Reference.svcmap 1 1 RadControlsSilverlightApp1 (ps., the service can be started in the browser, i get this: svcutil.exe http://localhost:9599/GetNewData.svc?wsdl )

    Read the article

  • Does boost::asio makes excessive small heap allocations or am I wrong?

    - by Poni
    #include <cstdlib> #include <iostream> #include <boost/bind.hpp> #include <boost/asio.hpp> using boost::asio::ip::tcp; class session { public: session(boost::asio::io_service& io_service) : socket_(io_service) { } tcp::socket& socket() { return socket_; } void start() { socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } void handle_read(const boost::system::error_code& error, size_t bytes_transferred) { if (!error) { data_[bytes_transferred] = '\0'; if(NULL != strstr(data_, "quit")) { this->socket().shutdown(boost::asio::ip::tcp::socket::shutdown_both); this->socket().close(); // how to make this dispatch "handle_read()" with a "disconnected" flag? } else { boost::asio::async_write(socket_, boost::asio::buffer(data_, bytes_transferred), boost::bind(&session::handle_write, this, boost::asio::placeholders::error)); socket_.async_read_some(boost::asio::buffer(data_, max_length - 1), boost::bind(&session::handle_read, this, boost::asio::placeholders::error, boost::asio::placeholders::bytes_transferred)); } } else { delete this; } } void handle_write(const boost::system::error_code& error) { if (!error) { // } else { delete this; } } private: tcp::socket socket_; enum { max_length = 1024 }; char data_[max_length]; }; class server { public: server(boost::asio::io_service& io_service, short port) : io_service_(io_service), acceptor_(io_service, tcp::endpoint(tcp::v4(), port)) { session* new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } void handle_accept(session* new_session, const boost::system::error_code& error) { if (!error) { new_session->start(); new_session = new session(io_service_); acceptor_.async_accept(new_session->socket(), boost::bind(&server::handle_accept, this, new_session, boost::asio::placeholders::error)); } else { delete new_session; } } private: boost::asio::io_service& io_service_; tcp::acceptor acceptor_; }; int main(int argc, char* argv[]) { try { if (argc != 2) { std::cerr << "Usage: async_tcp_echo_server <port>\n"; return 1; } boost::asio::io_service io_service; using namespace std; // For atoi. server s(io_service, atoi(argv[1])); io_service.run(); } catch (std::exception& e) { std::cerr << "Exception: " << e.what() << "\n"; } return 0; } While experimenting with boost::asio I've noticed that within the calls to async_write()/async_read_some() there is a usage of the C++ "new" keyword. Also, when stressing this echo server with a client (1 connection) that sends for example 100,000 times some data, the memory usage of this program is getting higher and higher. What's going on? Will it allocate memory for every call? Or am I wrong? Asking because it doesn't seem right that a server app will allocate, anything. Can I handle it, say with a memory pool? Another side-question: See the "this-socket().close();" ? I want it, as the comment right to it says, to dispatch that same function one last time, with a disconnection error. Need that to do some clean-up. How do I do that? Thank you all gurus (:

    Read the article

  • Hudson + Jboss AS 7.1 + Maven 3 Project Build Error

    - by Zehra Gül Çabuk
    I've wanted to prepare an environment that I'm able to build my project and run my tests on a integration server. So I've installed an Jboss application server 7.1 and deployed hudson.war to it. Then I've created a project to trigger "mvn clean install" and when I built it I've got following exception. [INFO] Using bundled Maven 3 installation [INFO] Checking Maven 3 installation environment [workspace] $ /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn --help [INFO] Checking Maven 3 installation version [INFO] Detected Maven 3 installation version: 3.0.3 [workspace] $ /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn clean install -V -B -Dmaven.ext.class.path=/disk7/hudson_home/maven/slavebundle/resources:/disk7/hudson_home/maven/slavebundle/lib/maven3-eventspy-3.0.jar:/disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/contents -Dhudson.eventspy.port=37183 -f pom.xml [DEBUG] Waiting for connection on port: 37183 Apache Maven 3.0.3 (r1075438; 2011-02-28 19:31:09+0200) Maven home: /disk7/hudson_home/maven/slavebundle/bundled-maven Java version: 1.7.0_04, vendor: Oracle Corporation Java home: /usr/lib/jvm/jdk1.7.0_04/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux", version: "3.2.0-24-generic", arch: "amd64", family: "unix" [ERROR] o.h.m.e.DelegatingEventSpy - Init failed java.lang.NoClassDefFoundError: hudson/remoting/Channel at org.hudsonci.maven.eventspy.common.RemotingClient.open(RemotingClient.java:103) ~[maven3-eventspy-runtime.jar:na] at org.hudsonci.maven.eventspy_30.RemotingEventSpy.openChannel(RemotingEventSpy.java:86) ~[maven3-eventspy-3.0.jar:na] at org.hudsonci.maven.eventspy_30.RemotingEventSpy.init(RemotingEventSpy.java:114) ~[maven3-eventspy-3.0.jar:na] at org.hudsonci.maven.eventspy_30.DelegatingEventSpy.init(DelegatingEventSpy.java:128) ~[maven3-eventspy-3.0.jar:na] at org.apache.maven.eventspy.internal.EventSpyDispatcher.init(EventSpyDispatcher.java:84) [maven-core-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.container(MavenCli.java:403) [maven-embedder-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:191) [maven-embedder-3.0.3.jar:3.0.3] at org.apache.maven.cli.MavenCli.main(MavenCli.java:141) [maven-embedder-3.0.3.jar:3.0.3] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[na:1.7.0_04] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57) ~[na:1.7.0_04] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[na:1.7.0_04] at java.lang.reflect.Method.invoke(Method.java:601) ~[na:1.7.0_04] at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409) [plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352) [plexus-classworlds-2.4.jar:na] Caused by: java.lang.ClassNotFoundException: hudson.remoting.Channel at org.codehaus.plexus.classworlds.strategy.SelfFirstStrategy.loadClass(SelfFirstStrategy.java:50) ~[plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:244) ~[plexus-classworlds-2.4.jar:na] at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:230) ~[plexus-classworlds-2.4.jar:na] ... 16 common frames omitted [ERROR] ABORTED [ERROR] Failed to initialize [ERROR] Caused by: hudson/remoting/Channel [ERROR] Caused by: hudson.remoting.Channel [ERROR] Failure: java.net.SocketException: Connection reset FATAL: Connection reset java.net.SocketException: Connection reset at java.net.SocketInputStream.read(SocketInputStream.java:189) at java.net.SocketInputStream.read(SocketInputStream.java:121) at java.io.FilterInputStream.read(FilterInputStream.java:133) at java.io.BufferedInputStream.fill(BufferedInputStream.java:235) at java.io.BufferedInputStream.read(BufferedInputStream.java:254) at hudson.remoting.Channel.<init>(Channel.java:385) at hudson.remoting.Channel.<init>(Channel.java:347) at hudson.remoting.Channel.<init>(Channel.java:320) at hudson.remoting.Channel.<init>(Channel.java:315) at hudson.slaves.Channels$1.<init>(Channels.java:71) at hudson.slaves.Channels.forProcess(Channels.java:71) at org.hudsonci.maven.plugin.builder.internal.PerformBuild.doExecute(PerformBuild.java:174) at org.hudsonci.utils.tasks.PerformOperation.execute(PerformOperation.java:58) at org.hudsonci.maven.plugin.builder.MavenBuilder.perform(MavenBuilder.java:169) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:630) at hudson.model.Build$RunnerImpl.build(Build.java:175) at hudson.model.Build$RunnerImpl.doRun(Build.java:137) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:429) at hudson.model.Run.run(Run.java:1366) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:145) I want to point out the command which is tried to execute by hudson : /disk7/hudson_home/maven/slavebundle/bundled-maven/bin/mvn clean install -V -B -Dmaven.ext.class.path=/disk7/hudson_home/maven/slavebundle/resources:/disk7/hudson_home/maven/slavebundle/lib/maven3-eventspy-3.0.jar:/disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/contents -Dhudson.eventspy.port=37183 -f pom.xml It tries to find "hudson-remoting-2.2.0.jar" to put it to build path but it searches it at the wrong place because when I look where the hudson-remoting jar I found it at /disk7/jboss-as-7.1.0.Final/standalone/tmp/vfs/deploymentdf2a6dfa59ee3407/hudson-remoting-2.2.0.jar-407215e5de02980f/hudson-remoting-2.2.0.jar for this build(not in contents). So how can I configure the hudson to force it looking at the right place for jars? Is there anyone has an idea? Thanks in advance.

    Read the article

  • wso2 ESB: server configuration CRITICAL

    - by nuvio
    My Scenario: I have server_1 (192.168.10.1) with wso2-ESB and server_2 (192.168.10.2) with Glassfish-v3 + web services. Problem: I am trying to create a proxy in ESB using the java Web Services, but the created proxy does not respond properly. The log says: Unable to sendViaPost for http or https does not change the result. I think I should configure the axis2.xml but I am having trouble, and don't know what to do. What is the configuration for my scenario? Please help me! EDIT: To be clear, I can directly consume the WebService in the Glassfish server, it works normal, both port and url are accessible. Only when I create a "Pass through Proxy" in the ESB, it does not work. I don't think is matter of Proxy configuration...I never had problems while deployed locally, problems started once I have uploaded the ESB to a remote server. I really would need someone to point me what is the correct procedure when installing the ESB on a remote host: configuration of axis2.xml and carbon.xml, ports, transport receivers etc... P.S. I had a look at the official (wso2 esb and carbon) guides with no luck, but I am missing something... Endpoint of Java Web Service: http://192.168.10.2:8080/HelloWorld/Hello?wsdl ESB Proxy Enpoint: http://192.168.10.1:8280/services/HelloProxy The following is my axis2.xml configuration, please check it: <transportReceiver name="http" class="org.apache.synapse.transport.nhttp.HttpCoreNIOListener"> <parameter name="port" locked="false">8280</parameter> <parameter name="non-blocking" locked="false">true</parameter> <parameter name="bind-address" locked="false">192.168.10.1</parameter> <parameter name="WSDLEPRPrefix" locked="false">https//192.168.10.1:8280</parameter> <parameter name="httpGetProcessor" locked="false">org.wso2.carbon.transport.nhttp.api.NHttpGetProcessor</parameter> <!--<parameter name="priorityConfigFile" locked="false">location of priority configuration file</parameter>--> </transportReceiver> <!-- the non blocking https transport based on HttpCore + SSL-NIO extensions --> <transportReceiver name="https" class="org.apache.synapse.transport.nhttp.HttpCoreNIOSSLListener"> <parameter name="port" locked="false">8243</parameter> <parameter name="non-blocking" locked="false">true</parameter> <parameter name="bind-address" locked="false">192.168.10.1</parameter> <parameter name="WSDLEPRPrefix" locked="false">https://192.168.10.1:8243</parameter> <!--<parameter name="priorityConfigFile" locked="false">location of priority configuration file</parameter>--> <parameter name="httpGetProcessor" locked="false">org.wso2.carbon.transport.nhttp.api.NHttpGetProcessor</parameter> <parameter name="keystore" locked="false"> <KeyStore> <Location>repository/resources/security/wso2carbon.jks</Location> <Type>JKS</Type> <Password>wso2carbon</Password> <KeyPassword>wso2carbon</KeyPassword> </KeyStore> </parameter> <parameter name="truststore" locked="false"> <TrustStore> <Location>repository/resources/security/client-truststore.jks</Location> <Type>JKS</Type> <Password>wso2carbon</Password> </TrustStore> </parameter> <!--<parameter name="SSLVerifyClient">require</parameter> supports optional|require or defaults to none --> </transportReceiver>

    Read the article

  • Mixing secure & unsecure channels

    - by user305023
    I am unable to use an unsecure channel once a secure channel has already been registered. The code below works only if on the client side, the unsecured channel is registered before. Is it possible to mix secure and unsecure channels without any constraint on the registration order ? using System; using System.Collections; using System.Runtime.Remoting; using System.Runtime.Remoting.Channels; using System.Runtime.Remoting.Channels.Tcp; public class SampleObject : MarshalByRefObject { public DateTime GetTest() { return DateTime.Now; } } public class SampleObject2 : MarshalByRefObject { public DateTime GetTest2() { return DateTime.Now; } } static class ProgramClient { private static TcpClientChannel RegisterChannel(bool secure, string name, int priority) { IDictionary properties = new Hashtable(); properties.Add("secure", secure); properties.Add("name", name); properties.Add("priority", priority); var clientChannel = new TcpClientChannel(properties, null); ChannelServices.RegisterChannel(clientChannel, false); return clientChannel; } private static void Secure() { RegisterChannel(true, "clientSecure", 2); var testSecure = (SampleObject2)Activator.GetObject(typeof(SampleObject2), "tcp://127.0.0.1:8081/Secured.rem"); Console.WriteLine("secure: " + testSecure.GetTest2().ToLongTimeString()); } private static void Unsecure() { RegisterChannel(false, "clientUnsecure", 1); var test = (SampleObject)Activator.GetObject(typeof(SampleObject), "tcp://127.0.0.1:8080/Unsecured.rem"); Console.WriteLine("unsecure: " + test.GetTest().ToLongTimeString()); } internal static void MainClient() { Console.Write("Press Enter to start."); Console.ReadLine(); // Works only in this order Unsecure(); Secure(); Console.WriteLine("Press ENTER to end"); Console.ReadLine(); } } static class ProgramServer { private static TcpServerChannel RegisterChannel(int port, bool secure, string name) { IDictionary properties = new Hashtable(); properties.Add("port", port); properties.Add("secure", secure); properties.Add("name", name); //properties.Add("impersonate", false); var serverChannel = new TcpServerChannel(properties, null); ChannelServices.RegisterChannel(serverChannel, secure); return serverChannel; } private static void StartUnsecure() { RegisterChannel(8080, false, "unsecure"); RemotingConfiguration.RegisterWellKnownServiceType(typeof(SampleObject), "Unsecured.rem", WellKnownObjectMode.Singleton); } private static void StartSecure() { RegisterChannel(8081, true, "secure"); RemotingConfiguration.RegisterWellKnownServiceType(typeof(SampleObject2), "Secured.rem", WellKnownObjectMode.Singleton); } internal static void MainServer() { StartUnsecure(); StartSecure(); Console.WriteLine("Unsecure: 8080\n Secure: 8081"); Console.WriteLine("Press the enter key to exit..."); Console.ReadLine(); } } class Program { static void Main(string[] args) { if (args.Length == 1 && args[0] == "server") ProgramServer.MainServer(); else ProgramClient.MainClient(); } }

    Read the article

  • WCF and Firewalls

    - by Amitd
    Hi guys, As a part of learning WCF, I was trying to use a simple WCF client-server code . http://weblogs.asp.net/ralfw/archive/2007/04/14/a-truely-simple-example-to-get-started-with-wcf.aspx but I'm facing strange issues.I was trying out the following. Client(My) IP address is : 192.168.2.5 (internal behind firewall) Server IP address is : 192.168.50.30 port : 9050 (internal behind firewall) Servers LIVE/External IP (on internet ) : 121.225.xx.xx (accessible from internet) When I specify the above I.P address of server(192.168.50.30), the client connects successfully and can call servers methods. Now suppose if I want to give my friend (outside network/on internet) the client with server's live I.P, i get an ENDPOINTNOTFOUND exceptions. Surprisingly if I run the above client specifying LIVE IP(121.225.xx.xx) of server i also get the same exception. I tried to debug the problem but haven't found anything. Is it a problem with the company firewall not forwarding my request? or is it a problem with the server or client . Is something needed to be added to the server/client to overcome the same problem? Or are there any settings on the firewall that need to be changed like port forwarding? (our network admin has configured the port to be accessible from the internet.) is it a authentication issue? Code is available at . http://www.ralfw.de/weblog/wcfsimple.txt http://weblogs.asp.net/ralfw/archive/2007/04/14/a-truely-simple-example-to-get-started-with-wcf.aspx i have just separated the client and server part in separate assemblies.rest is same. using System; using System.Collections.Generic; using System.Text; using System.ServiceModel; namespace WCFSimple.Contract { [ServiceContract] public interface IService { [OperationContract] string Ping(string name); } } namespace WCFSimple.Server { [ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)] class ServiceImplementation : WCFSimple.Contract.IService { #region IService Members public string Ping(string name) { Console.WriteLine("SERVER - Processing Ping('{0}')", name); return "Hello, " + name; } #endregion } public class Program { private static System.Threading.AutoResetEvent stopFlag = new System.Threading.AutoResetEvent(false); public static void Main() { ServiceHost svh = new ServiceHost(typeof(ServiceImplementation)); svh.AddServiceEndpoint( typeof(WCFSimple.Contract.IService), new NetTcpBinding(), "net.tcp://localhost:8000"); svh.Open(); Console.WriteLine("SERVER - Running..."); stopFlag.WaitOne(); Console.WriteLine("SERVER - Shutting down..."); svh.Close(); Console.WriteLine("SERVER - Shut down!"); } public static void Stop() { stopFlag.Set(); } } } namespace WCFSimple { class Program { static void Main(string[] args) { Console.WriteLine("WCF Simple Demo"); // start server System.Threading.Thread thServer = new System.Threading.Thread(WCFSimple.Server.Program.Main); thServer.IsBackground = true; thServer.Start(); System.Threading.Thread.Sleep(1000); // wait for server to start up // run client ChannelFactory<WCFSimple.Contract.IService> scf; scf = new ChannelFactory<WCFSimple.Contract.IService>( new NetTcpBinding(), "net.tcp://localhost:8000"); WCFSimple.Contract.IService s; s = scf.CreateChannel(); while (true) { Console.Write("CLIENT - Name: "); string name = Console.ReadLine(); if (name == "") break; string response = s.Ping(name); Console.WriteLine("CLIENT - Response from service: " + response); } (s as ICommunicationObject).Close(); // shutdown server WCFSimple.Server.Program.Stop(); thServer.Join(); } } } Any help?

    Read the article

  • C# need help debugging socks5-connection attemp

    - by Chuck
    Hi, I've written the following code to (successfully) connect to a socks5 proxy. I send a user/pw auth and get an OK reply (0x00), but as soon as I tell the proxy to connect to whichever ip:port, it gives me 0x01 (general error). Socket socket5_proxy = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); IPEndPoint proxyEndPoint = new IPEndPoint(IPAddress.Parse("111.111.111.111"), 1080); // proxy ip, port. fake for posting purposes. socket5_proxy.Connect(proxyEndPoint); byte[] init_socks_command = new byte[4]; init_socks_command[0] = 0x05; init_socks_command[1] = 0x02; init_socks_command[2] = 0x00; init_socks_command[3] = 0x02; socket5_proxy.Send(init_socks_command); byte[] socket_response = new byte[2]; int bytes_recieved = socket5_proxy.Receive(socket_response, 2, SocketFlags.None); if (socket_response[1] == 0x02) { byte[] temp_bytes; string socks5_user = "foo"; string socks5_pass = "bar"; byte[] auth_socks_command = new byte[3 + socks5_user.Length + socks5_pass.Length]; auth_socks_command[0] = 0x05; auth_socks_command[1] = Convert.ToByte(socks5_user.Length); temp_bytes = Encoding.Default.GetBytes(socks5_user); temp_bytes.CopyTo(auth_socks_command, 2); auth_socks_command[2 + socks5_user.Length] = Convert.ToByte(socks5_pass.Length); temp_bytes = Encoding.Default.GetBytes(socks5_pass); temp_bytes.CopyTo(auth_socks_command, 3 + socks5_user.Length); socket5_proxy.Send(auth_socks_command); socket5_proxy.Receive(socket_response, 2, SocketFlags.None); if (socket_response[1] != 0x00) return; byte[] connect_socks_command = new byte[10]; connect_socks_command[0] = 0x05; connect_socks_command[1] = 0x02; // streaming connect_socks_command[2] = 0x00; connect_socks_command[3] = 0x01; // ipv4 temp_bytes = IPAddress.Parse("222.222.222.222").GetAddressBytes(); // target connection. fake ip, obviously temp_bytes.CopyTo(connect_socks_command, 4); byte[] portBytes = BitConverter.GetBytes(8888); connect_socks_command[8] = portBytes[0]; connect_socks_command[9] = portBytes[1]; socket5_proxy.Send(connect_socks_command); socket5_proxy.Receive(socket_response); if (socket_response[1] != 0x00) MessageBox.Show("Damn it"); // I always end here, 0x01 I've used this as a reference: http://en.wikipedia.org/wiki/SOCKS#SOCKS_5 Have I completely misunderstood something here? How I see it, I can connect to the socks5 fine. I can authenticate fine. But I/the proxy can't "do" anything? Yes, I know the proxy works. Yes, the target ip is available and yes the target port is open/responsive. I get 0x01 no matter what I try to connect to. Any help is VERY MUCH appreciated! Thanks, Chuck

    Read the article

  • Trying to run Selenium tests using Hudson - "Error: no display specified"

    - by tputkonen
    I'm trying to get Selenium tests to work when they are executed by Hudson, but I have not been successful so far. Hudson is running on Ubuntu, and Selenium is unable to open display. Command I use for launching the build is: mvn clean selenium:xvfb install error log: [INFO] [selenium:xvfb {execution: default-cli}] [INFO] Starting Xvfb... [INFO] Using display: :20 [INFO] Using Xauthority file: /tmp/Xvfb4467650583214148352.Xauthority Deleting: /tmp/Xvfb4467650583214148352.Xauthority xauth: creating new authority file /tmp/Xvfb4467650583214148352.Xauthority Created dir: /var/lib/hudson/jobs/Selenium/workspace/selenium/target/selenium Launching Xvfb Waiting for Xvfb... [INFO] Redirecting output to: /var/lib/hudson/jobs/Selenium/workspace/selenium/target/selenium/xvfb.log Xvfb started ... [INFO] [selenium:start-server {execution: start}] Launching Selenium Server Waiting for Selenium Server... [INFO] Including display properties from: /var/lib/hudson/jobs/Selenium/workspace/selenium/target/selenium/display.properties [INFO] Redirecting output to: /var/lib/hudson/jobs/Selenium/workspace/selenium/target/selenium/server.log [INFO] User extensions: /var/lib/hudson/jobs/Selenium/workspace/selenium/target/selenium/user-extensions.js Selenium Server started [INFO] [selenium:selenese {execution: run-selenium}] [INFO] Results will go to: /var/lib/hudson/jobs/Selenium/workspace/selenium/target/results-firefox-suite.html ... <~30 seconds pause> ... Error: no display specified ... pom.xml: <groupId>org.codehaus.mojo</groupId> <artifactId>selenium-maven-plugin</artifactId> <version>1.0.1</version> <executions> <execution> <id>start</id> <phase>pre-integration-test</phase> <goals> <goal>start-server</goal> </goals> <configuration> <logOutput>true</logOutput> <background>true</background> <port>5123</port> </configuration> </execution> <execution> <id>run-selenium</id> <phase>integration-test</phase> <goals> <goal>selenese</goal> </goals> </execution> <execution> <id>stop</id> <phase>post-integration-test</phase> <goals> <goal>stop-server</goal> </goals> </execution> </executions> <configuration> <browser>*firefox</browser> <suite>src/test/selenium/suite.html</suite> <startURL>http://localhost:${env.port}</startURL> </configuration> I've also tried to get it working by adding execution for xvfb, but also it failed.

    Read the article

  • [.NET Remoting] Mixing secure & unsecure channels

    - by user305023
    I am unable to use an unsecure channel once a secure channel has already been registered. The code below works only if on the client side, the unsecured channel is registered before. Is it possible to mix secure and unsecure channels without any contraints on the registration order ? using System; using System.Collections; using System.Runtime.Remoting; using System.Runtime.Remoting.Channels; using System.Runtime.Remoting.Channels.Tcp; public class SampleObject : MarshalByRefObject { public DateTime GetTest() { return DateTime.Now; } } public class SampleObject2 : MarshalByRefObject { public DateTime GetTest2() { return DateTime.Now; } } static class ProgramClient { private static TcpClientChannel RegisterChannel(bool secure, string name, int priority) { IDictionary properties = new Hashtable(); properties.Add("secure", secure); properties.Add("name", name); properties.Add("priority", priority); var clientChannel = new TcpClientChannel(properties, null); ChannelServices.RegisterChannel(clientChannel, false); return clientChannel; } private static void Secure() { RegisterChannel(true, "clientSecure", 2); var testSecure = (SampleObject2)Activator.GetObject(typeof(SampleObject2), "tcp://127.0.0.1:8081/Secured.rem"); Console.WriteLine("secure: " + testSecure.GetTest2().ToLongTimeString()); } private static void Unsecure() { RegisterChannel(false, "clientUnsecure", 1); var test = (SampleObject)Activator.GetObject(typeof(SampleObject), "tcp://127.0.0.1:8080/Unsecured.rem"); Console.WriteLine("unsecure: " + test.GetTest().ToLongTimeString()); } internal static void MainClient() { Console.Write("Press Enter to start."); Console.ReadLine(); // Works only in this order Unsecure(); Secure(); Console.WriteLine("Press ENTER to end"); Console.ReadLine(); } } static class ProgramServer { private static TcpServerChannel RegisterChannel(int port, bool secure, string name) { IDictionary properties = new Hashtable(); properties.Add("port", port); properties.Add("secure", secure); properties.Add("name", name); //properties.Add("impersonate", false); var serverChannel = new TcpServerChannel(properties, null); ChannelServices.RegisterChannel(serverChannel, secure); return serverChannel; } private static void StartUnsecure() { RegisterChannel(8080, false, "unsecure"); RemotingConfiguration.RegisterWellKnownServiceType(typeof(SampleObject), "Unsecured.rem", WellKnownObjectMode.Singleton); } private static void StartSecure() { RegisterChannel(8081, true, "secure"); RemotingConfiguration.RegisterWellKnownServiceType(typeof(SampleObject2), "Secured.rem", WellKnownObjectMode.Singleton); } internal static void MainServer() { StartUnsecure(); StartSecure(); Console.WriteLine("Unsecure: 8080\n Secure: 8081"); Console.WriteLine("Press the enter key to exit..."); Console.ReadLine(); } } class Program { static void Main(string[] args) { if (args.Length == 1 && args[0] == "server") ProgramServer.MainServer(); else ProgramClient.MainClient(); } }

    Read the article

  • Odd performance with C# Asynchronous server socket

    - by The.Anti.9
    I'm working on a web server in C# and I have it running on Asynchronous socket calls. The weird thing is that for some reason, when you start loading pages, the 3rd request is where the browser won't connect. It just keeps saying "Connecting..." and doesn't ever stop. If I hit stop. and then refresh, it will load again, but if I try another time after that it does the thing where it doesn't load again. And it continues in that cycle. I'm not really sure what is making it do that. The code is kind of hacked together from a couple of examples and some old code I had. Any miscellaneous tips would be helpful as well. Heres my little Listener class that handles everything (pastied here. thought it might be easier to read this way) using System; using System.Collections.Generic; using System.Net; using System.Net.Sockets; using System.Text; using System.Threading; namespace irek.Server { public class Listener { private int port; private Socket server; private Byte[] data = new Byte[2048]; static ManualResetEvent allDone = new ManualResetEvent(false); public Listener(int _port) { port = _port; } public void Run() { server = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); IPEndPoint iep = new IPEndPoint(IPAddress.Any, port); server.Bind(iep); Console.WriteLine("Server Initialized."); server.Listen(5); Console.WriteLine("Listening..."); while (true) { allDone.Reset(); server.BeginAccept(new AsyncCallback(AcceptCon), server); allDone.WaitOne(); } } private void AcceptCon(IAsyncResult iar) { allDone.Set(); Socket s = (Socket)iar.AsyncState; Socket s2 = s.EndAccept(iar); SocketStateObject state = new SocketStateObject(); state.workSocket = s2; s2.BeginReceive(state.buffer, 0, SocketStateObject.BUFFER_SIZE, 0, new AsyncCallback(Read), state); } private void Read(IAsyncResult iar) { try { SocketStateObject state = (SocketStateObject)iar.AsyncState; Socket s = state.workSocket; int read = s.EndReceive(iar); if (read > 0) { state.sb.Append(Encoding.ASCII.GetString(state.buffer, 0, read)); if (s.Available > 0) { s.BeginReceive(state.buffer, 0, SocketStateObject.BUFFER_SIZE, 0, new AsyncCallback(Read), state); return; } } if (state.sb.Length > 1) { string requestString = state.sb.ToString(); // HANDLE REQUEST HERE // Temporary response string resp = "<h1>It Works!</h1>"; string head = "HTTP/1.1 200 OK\r\nContent-Type: text/html;\r\nServer: irek\r\nContent-Length:"+resp.Length+"\r\n\r\n"; byte[] answer = Encoding.ASCII.GetBytes(head+resp); // end temp. state.workSocket.BeginSend(answer, 0, answer.Length, SocketFlags.None, new AsyncCallback(Send), state.workSocket); } } catch (Exception) { return; } } private void Send(IAsyncResult iar) { try { SocketStateObject state = (SocketStateObject)iar.AsyncState; int sent = state.workSocket.EndSend(iar); state.workSocket.Shutdown(SocketShutdown.Both); state.workSocket.Close(); } catch (Exception) { } return; } } } And my SocketStateObject: public class SocketStateObject { public Socket workSocket = null; public const int BUFFER_SIZE = 1024; public byte[] buffer = new byte[BUFFER_SIZE]; public StringBuilder sb = new StringBuilder(); }

    Read the article

  • C socket: problem with connect() and/or accept() between clients. 111: Connection refused

    - by Fantastic Fourier
    Hello ladies and gents, I'm having a bit of problem with accept(). I have a multiple clients and one server. The clients can connect and communicate just fine with server. But at one point, I need some clients to be directly connected to each other and I'm having a bit of difficulty there. The clients have bunch of threads going on, where one of them is handle_connection() and it has a while(1), looping forever to listen() and accept() whatever incoming connections. Whenever a client tries to connect() to other client, connect() returns an error, 111: Connection Refused. I know I have the right IP address and right port (I have specified a port just for between-client connections). The client that is waiting for connection doesn't notice anything, no new connection, nada. I copied some parts of the code, in hopes that someone can point out what I'm doing wrong. Thanks for any inputs! This is all client side code. void * handle_connections(void * arg) is a thread that loops forever to accept() any incoming connections. My server has a very similar thang going on and it works very well. (not sure why it doesn't work here..) This is the part of client that is waiting for a new incoming connection. int handle_request(void * arg, struct message * msg) is called at one point during program and tries to connect to a client that is specified in struct message * msg which includes struct sockaddr_in with IP address and port number and whatever. #define SERVER_PORT 10000 #define CLIENT_PORT 3456 #define MAX_CONNECTION 20 #define MAX_MSG 50 void * handle_connections(void * arg) { struct fd_info * info; struct sockaddr_in client_address; struct timeval timeout; fd_set readset, copyset; bzero((char * ) &client_address, sizeof(client_address)); // copy zeroes into string client_address.sin_family = AF_INET; client_address.sin_addr.s_addr = htonl(INADDR_ANY); client_address.sin_port = htons(CLIENT_PORT); sockfd = socket(AF_INET, SOCK_STREAM, 0); rv = listen(sockfd,MAX_CONNECTION); while(1) { new_sockfd = accept(sockfd, (struct sockaddr *) &client_address, &client_addr_len); //blocks if (new_sockfd < 0) { printf("C: ERROR accept() %i: %s \n", errno, strerror(errno)); sleep(2); } else { printf("C: accepted\n"); FD_SET(new_sockfd, &readset); // sets bit for new_sockfd to list of sockets to watch out for if (maxfd < new_sockfd) maxfd = new_sockfd; if (minfd > new_sockfd) minfd = new_sockfd; } //end if else (new_sockfd) } // end of the forever while loop } int handle_request(void * arg, struct message * msg) { char * cname, gname, payload; char * command[3]; int i, rv, sockfd, client_addr_len; struct sockaddr_in client_address; struct fd_info * info; info = (struct fd_info *) arg; sockfd = info->sock_fd; sockfd = socket(AF_INET, SOCK_STREAM, 0); if (sockfd == -1) { printf("HR: ERROR socket() %i: %s \n", errno, strerror(errno)); break; } else if (sockfd > 0) { printf("HR: new socks is %i \n", sockfd); printf("HR: sin_family is %i: %i\n", msg->peer.client_address.sin_family, msg->peer.client_address.sin_port); //************************************************************* //this is the part that returns error 111: Connection refused!!! //************************************************************* rv = connect(sockfd, (struct sockaddr *) &msg->peer.client_address, sizeof(struct sockaddr)); if (rv == -1) { printf("HR: ERROR: connect() %i: %s \n", errno, strerror(errno)); printf("HR: at %li \n", msg->peer.client_address.sin_addr.s_addr); break; } else if (rv > 0) { info->max_fd = sockfd; printf("HR: connected successfully!! \n"); } } }

    Read the article

  • Perl MiniWebserver

    - by snikolov
    hey guys i have config this miniwebserver, however i require the server to download a file in the local directory i am getting a problem can you please fix my issue thanks !/usr/bin/perl use strict; use Socket; use IO::Socket; my $buffer; my $file; my $length; my $output; Simple web server in Perl Serves out .html files, echos form data sub parse_form { my $data = $_[0]; my %data; foreach (split /&/, $data) { my ($key, $val) = split /=/; $val =~ s/+/ /g; $val =~ s/%(..)/chr(hex($1))/eg; $data{$key} = $val;} return %data; } Setup and create socket my $port = shift; defined($port) or die "Usage: $0 portno\n"; my $DOCUMENT_ROOT = $ENV{'HOME'} . "public"; my $server = new IO::Socket::INET(Proto = 'tcp', LocalPort = $port, Listen = SOMAXCONN, Reuse = 1); $server or die "Unable to create server socket: $!" ; Await requests and handle them as they arrive while (my $client = $server-accept()) { $client-autoflush(1); my %request = (); my %data; { -------- Read Request --------------- local $/ = Socket::CRLF; while (<$client>) { chomp; # Main http request if (/\s*(\w+)\s*([^\s]+)\s*HTTP\/(\d.\d)/) { $request{METHOD} = uc $1; $request{URL} = $2; $request{HTTP_VERSION} = $3; } # Standard headers elsif (/:/) { (my $type, my $val) = split /:/, $_, 2; $type =~ s/^\s+//; foreach ($type, $val) { s/^\s+//; s/\s+$//; } $request{lc $type} = $val; } # POST data elsif (/^$/) { read($client, $request{CONTENT}, $request{'content-length'}) if defined $request{'content-length'}; last; } } } -------- SORT OUT METHOD --------------- if ($request{METHOD} eq 'GET') { if ($request{URL} =~ /(.*)\?(.*)/) { $request{URL} = $1; $request{CONTENT} = $2; %data = parse_form($request{CONTENT}); } else { %data = (); } $data{"_method"} = "GET"; } elsif ($request{METHOD} eq 'POST') { %data = parse_form($request{CONTENT}); $data{"_method"} = "POST"; } else { $data{"_method"} = "ERROR"; } ------- Serve file ---------------------- my $localfile = $DOCUMENT_ROOT.$request{URL}; Send Response if (open(FILE, "<$localfile")) { print $client "HTTP/1.0 200 OK", Socket::CRLF; print $client "Content-type: text/html", Socket::CRLF; print $client Socket::CRLF; my $buffer; while (read(FILE, $buffer, 4096)) { print $client $buffer; } $data{"_status"} = "200"; } else { $file = 'a.pl'; open(INFILE, $file); while (<INFILE>) { $output .= $_; ##output of the file } $length = length($output); print $client "'HTTP/1.0 200 OK", Socket::CRLF; print $client "Content-type: application/octet-stream", Socket::CRLF; print $client "Content-Length:".$length, Socket::CRLF; print $client "Accept-Ranges: bytes", Socket::CRLF; print $client 'Content-Disposition: attachment; filename="test.zip"', Socket::CRLF; print $client $output, Socket::CRLF; print $client 'Content-Transfer-Encoding: binary"', Socket::CRLF; print $client "Connection: Keep-Alive", Socket::CRLF; # #$data{"_status"} = "404"; # } close(FILE); Log Request print ($DOCUMENT_ROOT.$request{URL},"\n"); foreach (keys(%data)) { print (" $_ = $data{$_}\n"); } ----------- Close Connection and loop ------------------ close $client; } END

    Read the article

  • How to revert-back from SSL to non-SSL in Tomcat 6 ?

    - by mohamida
    I'm using jsf 2 + jaas + ssl + tomcat 6.0.26 I have in my web site 2 paths: /faces/protected/* which uses SSL /faces/unprotected/* which don't uses SSL. I've put this in my web.xml: <login-config> <auth-method>FORM</auth-method> <form-login-config> <form-login-page>/faces/login.jsp</form-login-page> <form-error-page>/faces/error.jsp</form-error-page> </form-login-config> </login-config> <security-constraint> <web-resource-collection> <web-resource-name>Secure Resource</web-resource-name> <description/> <url-pattern>/faces/unprotected/*</url-pattern> <http-method>GET</http-method> <http-method>POST</http-method> <http-method>HEAD</http-method> <http-method>PUT</http-method> <http-method>OPTIONS</http-method> <http-method>TRACE</http-method> <http-method>DELETE</http-method> </web-resource-collection> <auth-constraint> <role-name>C</role-name> </auth-constraint> </security-constraint> <security-constraint> <web-resource-collection> <web-resource-name>Secure Resource</web-resource-name> <description /> <url-pattern>/faces/protected/*</url-pattern> <http-method>GET</http-method> <http-method>POST</http-method> <http-method>HEAD</http-method> <http-method>PUT</http-method> <http-method>OPTIONS</http-method> <http-method>TRACE</http-method> <http-method>DELETE</http-method> </web-resource-collection> <auth-constraint> <role-name>C</role-name> </auth-constraint> <user-data-constraint> <transport-guarantee>CONFIDENTIAL</transport-guarantee> </user-data-constraint> </security-constraint> <security-role> <description> Role Client </description> <role-name>C</role-name> </security-role> and this is my server.xml: <Connector port="8080" protocol="HTTP/1.1" maxThreads="400" maxKeepAliveRequests="1" acceptCount="100" connectionTimeout="3000" redirectPort="8443" compression="on" compressionMinSize="2048" noCompressionUserAgents="gozilla, traviata" compressableMimeType="text/javascript,text/css,text/html, text/xml,text/plain,application/x-javascript,application/javascript,application/xhtml+xml" /> <Connector port="8443" protocol="org.apache.coyote.http11.Http11AprProtocol" SSLEnabled="true" maxThreads="400" scheme="https" secure="true" clientAuth="optional" sslProtocol="TLS" SSLCertificateFile="path/to/crt" SSLCertificateKeyFile="path/to/pem"/> when i enter to protected paths, it switches to HTTPS (port 8443), but when i enter to path /faces/unprotected/somthing... it stays using HTTPS. what i want is when i enter to unprotected paths, it revert-back to non-SSL communications ( otherwise, i have to re-login again when i set the exact adress in my browser). What's wrong with my configurations ? Is there a way so i can do such a thing ?

    Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >