Search Results

Search found 6702 results on 269 pages for 'niel de wet'.

Page 197/269 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Wireless is detected, but not connecting. Ethernet works. How to correct the wireless address?

  - by Lucas

  I am running Ubuntu 14.04 with cable internet, and my wireless is detected and connected, but I cannot connect to the internet. I know the problem is with my machine because other machines are connecting to the same router just fine. I can connect via ethernet just fine as well. Here are some notable tests: ping 192.168.0.105 works with 0% packet loss, but ping 192.168.0.1 has 100% packet loss. When I plug in my ethernet, ping 192.168.0.1 works with 0% packet loss. My wireless name is tg, and the router ip is 192.168.0.1 (where I can enter username and password). I suspect that I need to change my wireless address from 192.168.0.105 to 192.168.0.1. Any suggestions on how to proceed? extra info: [lucas@lucas-ThinkPad-W520]/home/lucas$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"tg" Mode:Managed Frequency:2.462 GHz Access Point: 00:02:6F:83:F8:F4 Bit Rate=1 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=62/70 Signal level=-48 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:52 Invalid misc:166 Missed beacon:0 [lucas@lucas-ThinkPad-W520]/home/lucas$ ifconfig eth0 Link encap:Ethernet HWaddr f0:de:f1:b2:53:53 inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f2de:f1ff:feb2:5353/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:980003 errors:0 dropped:0 overruns:0 frame:0 TX packets:498384 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1320506168 (1.3 GB) TX bytes:59780591 (59.7 MB) Interrupt:20 Memory:f3a00000-f3a20000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:21927 errors:0 dropped:0 overruns:0 frame:0 TX packets:21927 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1781719 (1.7 MB) TX bytes:1781719 (1.7 MB) wlan0 Link encap:Ethernet HWaddr 24:77:03:29:8f:dc inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::2677:3ff:fe29:8fdc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11828 errors:0 dropped:0 overruns:0 frame:0 TX packets:15444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4855662 (4.8 MB) TX bytes:2250585 (2.2 MB) [lucas@lucas-ThinkPad-W520]/home/lucas$ lspci -nn | grep 0280 03:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) [lucas@lucas-ThinkPad-W520]/home/lucas$ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no with ethernet unplugged: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0 with ethernet plugged in: [lucas@lucas-ThinkPad-W520]/home/lucas$ route -n | grep UG 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 [lucas@lucas-ThinkPad-W520]/home/lucas$ nm-tool NetworkManager Tool State: connected (global) - Device: wlan0 [tg] ---------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: connected Default: no HW Address: 24:77:03:29:8F:DC Capabilities: Speed: 52 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) tatum: Infra, 40:8B:07:D8:A5:04, Freq 2437 MHz, Rate 54 Mb/s, Strength 42 W PA WPA2 ums: Infra, 00:20:A6:72:52:BF, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 Alpha 40: Infra, 28:CF:E9:86:59:5D, Freq 5260 MHz, Rate 54 Mb/s, Strength 30 W PA WPA2 thepromiselan: Infra, 58:6D:8F:51:E5:54, Freq 2452 MHz, Rate 54 Mb/s, Strength 34 $ PA WPA2 xfinitywifi: Infra, 06:1D:D5:84:27:A0, Freq 2437 MHz, Rate 54 Mb/s, Strength 52 *tg: Infra, 00:02:6F:83:F8:F4, Freq 2462 MHz, Rate 54 Mb/s, Strength 73 W PA2 ums: Infra, 00:20:A6:A1:9F:25, Freq 2452 MHz, Rate 54 Mb/s, Strength 44 BRIAN-PC_Network:Infra, 20:AA:4B:DD:93:D6, Freq 2462 MHz, Rate 54 Mb/s, Strength 35 W PA2 HOME-C0F8: Infra, 44:32:C8:D2:C0:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 40 W PA WPA2 abcsexy: Infra, 28:28:5D:27:5D:85, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 W PA WPA2 IPv4 Settings: Address: 192.168.0.105 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: e1000e State: connected Default: yes HW Address: F0:DE:F1:B2:53:53 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1

  Read the article

• Silverlight Cream for November 16, 2011 -- #1167

  - by Dave Campbell

  In this Issue: Michael Crump, Andrea Boschin, Michael Sync, WindowsPhoneGeek(-2-), Erno de Weerd, Jesse Liberty, Derik Whittaker, Antoni Dol, Walter Ferrari, and Jeff Blankenburg(-2-). Above the Fold: Silverlight: "10 Laps around Silverlight 5 (Part 6 of 10)" Michael Crump WP7: "31 Days of Mango | Day #2: Device Status" Jeff Blankenburg Metro/WinRT/W8: "Lighting up your C# Metro apps by being a Share Target" Derik Whittaker Shoutouts: Michael Palermo's latest Desert Mountain Developers is up Michael Washington's latest Visual Studio #LightSwitch Daily is up SilverlightShow has announced a webinar you probably don't want to miss: Webinar – Introduction to XAML Development on Windows 8 Check out the top 5 from last week at SilverlightShow: SilverlightShow for November 07 - 13, 2011 From SilverlightCream.com: 10 Laps around Silverlight 5 (Part 6 of 10) Michael Crump covers a lot of territory in this Part 6 of his Silverlight 5 Beta series at SilverlightShow: P/Invoke, Multiple Windows, and Full Trust Windows Phone 7.5 - Manipulating camera stream Andrea Boschin has Part 4 of his Mango series up at SilverlightShow. He's discussing accessing the raw stream from the camera and saving it to a file. Blend 4 + VS 2011 (Preview) = Problem? Michael Sync reports a problem with Blend 4 and the VS2011 preview... followed up by a set of scripts that were posted on Connect to make the problem go away (at least for Michael) Windows Phone Toolkit MultiselectList in depth | Part1: key concepts and API WindowsPhoneGeek begins a series on the MultiselectList in the Phone Toolkit... if you've seen his tutorials, you know they're great... this one is no exception.. lots of code, info and notes getting you on-board with the features Getting Started with Windows Phone Alarms WindowsPhoneGeek next takes a sidestep from his new series and has this post on Alarms in WP7 apps .. one of the type of scheduled actions in WP7.1 ... good write-up, pictures and code Using AppHarbor, Bitbucket and Mercurial with ASP.NET and Silverlight – Part 3 Membership and Role Provider in SQL Server Erno de Weerd's part 3 of his series is up... adding Role and Membership to his application... check it out in this 17-step tutorial Yet Another Podcast #51–Shawn Wildermuth: //build, Xaml Programming & Beyond Jesse Liberty has another of his Yet Another Podcasts up and he's talking with Jon Galloway and Shawn Wildermuth... hear what *that* trio has to say about post //BUILD, and all things XAML Lighting up your C# Metro apps by being a Share Target Derik Whittaker continues to work with Metro... evidenced by this post on wiring your app up to be a Share Target .. allowing your app to consume data from other apps Photoshop in METRO style 2: Filters Antoni Dol follows up his Photoshop in Metro post with this one on filters... he's got some great screenshots... was hoping to see a link to the code... maybe I missed it! Silverlight and Sharepoint working together: a Silverlight menu for Sharepoint - Part 1 Walter Ferrari has part 1 of a series up at SilverlightShow talking about Sharepoint and Silverlight, and using Silverlight Navigation in place of what Sharepoint offers up. 31 Days of Mango | Day #2: Device Status Jeff Blankenburg is motoring along on his 31 Days of Mango. This is his Day 2 post and all about DeviceStatus, or just about everything you would like to know about your user's phone 31 Days of Mango | Day #3: Alarms and Reminders Day 3 of Jeff Blankenburg's series is about Alarms and Reminders... a way to alert your user that something needs to be done... you can create, edit, and delete them as needed Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• ArchBeat Link-o-Rama for 2012-08-30

  - by Bob Rhubart

  Next Generation Mobile Clients for Oracle Applications & the role of Oracle Fusion Middleware | Manish Palaparthy Manish Palaparthy examines some of Oracle's mobile applications, and takes a look at the underlying technology. Master Data Management: A Foundation for Big Data Analysis | Manouj Tahiliani "Businesses that have embraced MDM to get a single, enriched and unified view of Master data by resolving semantic discrepancies and augmenting the explicit master data information from within the enterprise with implicit data from outside the enterprise like social profiles will have a leg up in embracing Big Data solutions. This is especially true for large and medium-sized businesses in industries like Retail, Communications, Financial Services, etc that would find it very challenging to get comprehensive analytical coverage and derive long-term success without resolving the limitations of the heterogeneous topology that leads to disparate, fragmented and incomplete master data." — Manouj Tahiliani Architect Day: Boston - Agenda Update Here's the latest updated information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. OTN Architect Day: Boston is being held on Wednesday September 12, 2012, 8:00 a.m. – 5:00 p.m., at the Boston Marriott Burlington, One Burlington Mall Road, Burlington, MA 01803. Integrating Coherence & Java EE 6 Applications using ActiveCache | Ricardo Ferreira The seamless integration between Oracle Coherence and Oracle WebLogic Server "provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency," explains Ricardo Ferreira, "since Oracle provides a DI (Dependency Injection) mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache." Ricardo shows you how to configure ActiveCache in WebLogic and your Java EE application. Cloud Infrastructure has a new standard from the DMTF "Unlike a de facto standard where typically one vendor has change control over the interface, and everyone else has to reverse engineer the inner workings of it, [Cloud Infrastructure Management Interface (CIMI)] is a de jure standard that is under change control of a standards body. One reason the standard took two years to create is that we factored in use cases, requirements and contributed APIs from multiple vendors. These vendors have products shipping today and as a result CIMI has a strong foundation in real world experience." Oracle GoldenGate 11g Release Launch Webcast- September 12 The new release of Oracle GoldenGate 11g is now available for major databases and platforms. Register for this webcast and live Q&A with product experts to learn about the solution's new features. September 12, 2012. 8:00am AM and 10:00AM PT. Speakers: Doug Reid (Director, Product Management, Oracle GoldenGate), Irem Radzik (Director, Product Marketing, Oracle Data Integration Products) Thought for the Day "[When] asking skilled architects…what they do when confronted with highly complex problems… [they] would most likely answer, 'Just use Common Sense.' [A] better expression than 'common sense' is 'contextual sense'—a knowledge of what is reasonable within a given context. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

• GoldenGate 12c - MySQL Active-Active Replication Setup

  - by Jinyu Wang-Oracle

  Active-active  (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data.  Active-Active replication is often needed for high availability, load balancing and scaling out purposes.   Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems.  Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105)  Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data  looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows.  TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions. 

  Read the article

• Silverlight Cream for January 15, 2011 -- #1028

  - by Dave Campbell

  Note to #1024 Swag Winners: I'm sending emails to the vendors Sunday night, thanks for your patience (a few of you have not contacted me yet) In this Issue: Ezequiel Jadib, Daniel Egan(-2-), Page Brooks, Jason Zander, Andrej Tozon, Marlon Grech, Jonathan van de Veen, Walt Ritscher, Jesse Liberty, Jeremy Likness, Sacha Barber, William E. Burrows, and WindowsPhoneGeek. Above the Fold: Silverlight: "Building a Radar Control in Silverlight - Part 1" Page Brooks WP7: "Tutorial: Dynamic Tile Push Notification for Windows Phone 7" Jason Zander Training: "WP7 Unleashed Session I–Hands on Labs" Daniel Egan From SilverlightCream.com: Silverlight Rough Cut Editor SP1 Released Ezequiel Jadib has an announcement about the Rough Cut Editor SP1 release, and he walks you through the content, installation and a bit of the initial use. WP7 Unleashed Session I–Hands on Labs Daniel Egan posted Part 1 of 3 of a new WP7 HOL ... video online and material to download... get 'em while they're hot! WP7 Saving to Media Library Daniel Egan has another post up as well on saving an image to the media library... not the update from Tim Heuer... all good info Building a Radar Control in Silverlight - Part 1 This freakin' cool post from Page Brooks is the first one of a series on building a 'Radar Control' in Silverlight ... seriously, go to the bottom and run the demo... I pretty much guarantee you'll take the next link which is download the code... don't forget to read the article too! Tutorial: Dynamic Tile Push Notification for Windows Phone 7 Jason Zander has a nice-looking tutorial up on dynamic tile notifications... good diagrams and discussion and plenty of code. Reactive.buffering.from event. Andrej Tozon is continuing his Reactive Extensions posts with this one on buffering: BufferWithTime and BufferWIthCount ... good stuff, good write-up, and the start of a WP7 game? MEFedMVVM with PRISM 4 Marlon Grech combines his MEFedMVVM with Prism 4, and says it was easy... check out the post and the code. Adventures while building a Silverlight Enterprise application part #40 Jonathan van de Veen has a discussion up about things you need to pay attention to as your project gets close to first deployment... lots of good information to think about Silverlight or not. Customize Windows 7 Preview pane for XAML files Walt Ritscher has a (very easy) XAML extension for Windows 7 that allows previewing of XAML files in an explorer window... as our UK friends say "Brilliant!" Entity Framework Code-First, oData & Windows Phone Client From the never-ending stream of posts that is Jesse Liberty comes this one on EF Code-First... so Jesse's describing Code-First and OData all wrapped up about a WP7 app Sterling Silverlight and Windows Phone 7 Database Triggers and Auto-Identity Sterling and Database Triggers sitting in a tree... woot for WP7 from Jeremy Likness... provides database solutions including Validation, Data-specific concerns such as 'last modified', and post-save processing ... all good, Jeremy! A Look At Fluent APIs Sacha Barber has a great post up that isn't necessarily Silverlight, but is it? ... we've been hearing a lot about Fluent APIs... read on to see what the buzz is. Windows Phone 7 - Part 3 - Final Application William E. Burrows has Part 3 of his WP7 tutorial series up... this one completing the Golf Handicap app by giving the user the ability to manage scores. User Control vs Custom Control in Silverlight for WP7 WindowsPhoneGeek has a great diagram and description-filled post up on User Controls and Custom Controls in WP7... good external links too. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Apprentice Boot Camp in South Africa (Part 2)

  - by Tim Koekkoek

  By Maximilian Michel (DE), Jorge Garnacho (ES), Daniel Maull (UK), Adam Griffiths (UK), Guillermo De Las Nieves (ES), Catriona McGill (UK), Ed Dunlop (UK) Today we have the second part of the adventures of seven apprentices from all over Europe in South-Africa!  Kruger National Park & other experiences Going to the Kruger National Park was definitely an experience we will all remember for the rest of our lives. This trip,organised by Patrick Fitzgerald, owner of the Travellers Nest (where we all stayed), took us from the hustle and bustle of Joburg to experience what Africa is all about, the wild! Although the first week’s training we had prior to this trip to the Kruger was going very well, we all knew this was to be a very nice break before we started the second week of training. And we were right, the animals, scenery and sights we saw were just simply incredible and like I said something we will remember for the rest of our lives. To see lions, elephants, cheetahs and rhinos and many more in a zoo is one thing, but to see them in the wild, in their natural habitat is very special and I personally only realised this from the early 5 am start on the first morning in the Kruger, which was definitely worth it. Not only was it all about the safari, we ate some wonderful food, in particular on the Saturday night, Patrick made us a traditional South African Braai which was one of my favourite meals of the whole two weeks. After the Kruger National Park we had a whole day of traveling back to Johannesburg but even this was made to be a good day by our hosts. Despite the early start on the road it was all worth it by the time we reached God's Window. The walk to the top was made a lot harder by all the steaks we had eaten in the first week but the hard walk was worth it at the top, with views that stretched for miles. The Food The food in South Africa is typically meat and in big amounts, while there we ate a lot of big beef steaks, ribs and kudu sausage. All of the meat we ate was usually cooked with a sauce such as a Barbeque glaze. The restaurants we visited were: Upperdeck Restaurant, with live music and a great terrace to eat, the atmosphere was good for enjoying the music and eating our food. Most of us ate  Spare ribs that weighed 600 kg, with barbecue sauce that was delicious. Die Bosvelder Pub & Restaurant is a restaurant with a very surprising decor, this is because the walls had many of south Africa’s famous animals on them. The food was maybe the best we ate in South Africa. Our orders were: Springbokvlakte Lambs' Neck Stew, beef in gravy and steaks topped with cheese and then more meat on top! All meals were accompanied by a selection of white sauce cauliflower, spinach and zanhorias. Pepper Chair Restaurant, where the specialty is T-Bone steaks of 1.4 kg, but most of us were happy to attempt the 1 kg. Cooked with barbecue sauce over the meat, it was very good!  The only problem was their size causing the  the meat to get cold if you did not eat it very fast! We’re all waiting for our 1.0 kg t-bone steak including our Senior Director EMEA Systems Support Germany & Switzerland: Werner Hoellrigl The Godfather Restaurant, the food here was more meat in abundance. We ate: great ribs, hamburgers, steaks and all accompanied with a small plates of carrot and sauteed spinach, very good. We had two great weeks in South-Africa! If you want to join Oracle, then check http://campus.oracle.com 

  Read the article

• ArchBeat Link-o-Rama Top 10 for August 19-26, 2012

  - by Bob Rhubart

  The Top 10 most popular items shared via the OTN ArchBeat Facebook page for the week of August 19-26, 2012. Now Available: Oracle SQL Developer 3.2 (3.2.09.23) The latest release of Oracle SQl Developer includes UI enhancements, 12c database support, and bug fixes. ADF Tutorial Chapter 3: Creating a Master-Detail taskflow | Yannick Ongena Oracle ACE Yannick Ongena continues his ADF tutorial with a chapter devoted to view layer and using the data control to build pages that allow user to update reference data. GlassFish Community Event at JavaOne 2012 Don't miss out on this exclusive GlassFish Community Event on Sunday, September 30th from 11:00 a.m. – 1:00 p.m. in Moscone South. Register Now! Part of JavaOne 2012. Oracle BI 11g Book Authors – Podcast #9 | Art of Business Intelligence In this home-grown podcast, authors Christian Screen, Haroun Khan, and Adrian Ward talk about their new book, "Oracle Business Intelligence Enterprise Edition 11g: A Hands-On Tutorial," about their sessions at Oracle OpenWorld, and about their ORACLENERD t-shirts. Oracle Service Bus duplicate message check using Coherence | Jan van Zoggel "Giving the fact that every message on our ESB has an unique messageID element in the SOAP header we could store this on disk, database or in memory,"says Jan van Zoggel. "With the help of Oracle Coherence this last option, in memory, is relatively simple." Even simpler with Jan's detailed instructions. Oracle Technology Network Architect Day - Boston - Sept 12 There are easier ways to increase your IT brainpower. Skip the electrodes and register for Oracle Technology Network Architect Day in Boston, September 12, 2012. This free event includes 8 technical sessions, panel Q&A, roundtable discussions—and a free lunch. 8:00 a.m. – 5:00 p.m. at the Boston Marriott Burlington, One Burlington Mall Road, Burlington, MA 01803. Oracle BPM enable BAM | Peter Paul van de Beek "BAM enables you to make decisions based on real-time information gathered from your running processes," says Peter Paul van de Beek. "With BPMN processes you can use the standard Business Indicators that the BPM Suite offers you and use them to with BAM without much extra effort." Sample Application for Switching Application Module Data Sources | Andrejus Baranovskis A sample application and how-to guide from Oracle ACE Director and ADF expert Andrejus Baranovskis. ORCLville: Some Basic BI Thoughts "If we'd stop to consider what business intelligence really is, many of us might grow a different perspective about how we implement enterprise apps," says Oracle ACE Director Floyd Teter. "What if we implemented with an eye to what kind of information we'd like to get from our enterprise apps?" Oracle VM VirtualBox 4.1.20 released |Oracle's Virtualization Blog Oracle VM VirtualBox 4.1.20 was just released at the community and Oracle download sites, reports the Fat Bloke. This is a maintenance release containing bug fixes and stability improvements. Thought for the Day "The programmer, like the poet, works only slightly removed from pure thought-stuff. He builds his castles in the air, from air, creating by exertion of the imagination. Few media of creation are so flexible, so easy to polish and rework, so readily capable of realizing grand conceptual structures." — Frederick P. Brooks Source: SoftwareQuotes

  Read the article

• ArchBeat Link-o-Rama Top 10 for October 7-13, 2012

  - by Bob Rhubart

  The Top 10 items shared via the OTN ArchBeat Facebook page for the week of October 7-13, 2012. OOW12: Oracle Business Process Management/Oracle ADF Integration Best Practices | Andrejus Baranovskis The Oracle OpenWorld presentations keep coming! Oracle ACE Director Andrejus Baranovskis shares the slides from "Oracle Business Process Management/Oracle ADF Integration Best Practices," co-presented with Danilo Schmiedel from Opitz Consulting. Oracle's Analytics, Engineered Systems, and Big Data Strategy | Mark Rittman Part 1 of 3 in Oracle ACE Director Mark Rittman's series on Oracle Exalytics, Oracle R Enterprise and Endeca. Adaptive ADF/WebCenter template for the iPad | Maiko Rocha Oracle Fusion Middleware A-Team member Maiko Rocha responds to a a customer request for information about how to create an adaptive iPad template for their WebCenter Portal application, "a specific template to streamline their workflow on the iPad." Following the Thread in OSB | Antony Reynolds Antony Reynolds recently led an Oracle Service Bus POC in which his team needed to get high throughput from an OSB pipeline. "Imagine our surprise when, on stressing the system, we saw it lock up, with large numbers of blocked threads." He shares the details of the problem and the solution in this extensive technical post. WebCenter Sites Gadget Development Concepts Quickstart | John Brunswick What are Gadgets? "At their most basic level they can be thought of as lightweight portlets that run largely on the client side of an architecture," says John Brunswick. "Gadgets provide a cross-platform container to run reusable UI modules that generally expose dynamic information to an end user, allowing for some level of end user customization." Oracle Fusion Middleware Security: OAM and OIM 11g Academies Looking for technical how-to content covering Oracle Access Manager and Oracle Identity Manager? The people behind the Oracle Middleware Security blog have indexed relevant blog posts into what they call Academies. "These indexes contain the articles we've written that we believe provide long lasting guidance on OAM and OIM. Posts covered in these series include articles on key aspects of OAM and OIM 11g, best practice architectural guidance, integrations, and customizations." Fusion Applications Technical Tips | Naveen Nahata "Setting memory parameters for Admin and Managed servers of various domains in Fusion Applications can be, let us say, a little daunting," says Oracle Fusion Middleware A-Team member Naveen Nahata. "While all this may look complicated and intimidating, it is actually relatively simple once you understand how it all works." Updated Agenda for OTN Architect Day Los Angeles (Oct 25) In less than two weeks Oracle Architect Day rolls into Los Angeles, with a full slate of sessions devoted to cloud computing, engineered systems, and SOA. Follow the link for the updated event agenda. ORCLville: OOW 2012 - A Not So Brief Recap Oracle ACE Director Floyd Teter, an Applications & Apps Technology specialists, shares his personal, frank, and and extensive recap or Oracle OpenWorld 2012. SOA Suite create partition in Enterprise Manager | Peter Paul van de Beek "In Oracle SOA Suite 10g, or more specific BPEL 10g, one could group functionality in domains," says Peter Paul van de Beek. "This feature has been away in the early versions of SOA Suite 11g. They have returned in more recent version and can be used for all SCA composites (instead of BPEL only). Nowadays these 10g domains are called partitions." Thought for the Day "I strive for an architecture from which nothing can be taken away." — Helmut Jahn Source: BrainyQuote.com

  Read the article

• Business School graduate joins Oracle

  - by jessica.ebbelaar(at)oracle.com

  My name is Mathias, I work as an Applications Inside Sales Rep for the French market, and I’d like to give you a brief snapshot of my experience at Oracle. First things first, how did you hear about Oracle? Where have you seen the sharp and recognizable red logo? Was it in Charles de Gaulle Airport when your eyes crossed the 20-metre banner with a picture of a strange big machine in the middle? Was it through reading the Forbes 10 top IT companies worldwide ranking? Or is it because IT is your thing and you cannot but know one of the “big four”? Meeting with a Grenoble Alumnus My story is a little different. My plan was to work in sales, in the IT industry. I had heard about Oracle, but my opinion at the time was that this kind of multinational company was way out of reach for a young graduate, even with high enthusiasm and great excitement to be (finally) on the job market. So, I was really surprised when I had an interesting conversation with a top alumnus of my business school. We were at the Grenoble Ecole de Management graduation ceremony (our graduation!), and before the party got really started, I got to chat with her. She told me of the great experience she was getting by living and working in Dublin. She had already figured it all out: “you work with another 100 young people from 10 different nationalities across Europe, you can be based in Dublin, but then once you work really hard you can move to Malaga Spain or other BUs around the world, you can work with different lines of business and learn about new “techy” and business oriented products, move to the field in your home country or elsewhere, etc.” What, what, what? Moving around Europe, trained by the best sales coaches in the world, acquiring strong IT knowledge and getting on board with one of fastest-growing and most watched companies in the world? Well, I was in. The next day (OK, 3 days after, the time to recover), I sent her my CV, and 3 months later I started as a Business Development Consultant at Oracle in Dublin, representing the latest cloud based CRM across the French market. That was 15 months ago. Since then, I moved line of business twice, I’m always learning new things and working with different and senior stakeholders; I have attended hundreds of hours of sales and product training (priceless when you come from a business background); I passed the Dublin Institute of Technology Sales Certification through different trainings given onsite within Oracle; I’ve led projects based around social media and I’ve gotten involved within various sales deals going on my market. Despite all of these great things, two will remain in my spirit: the multiculturalism that I experience every day in the office, and the American style of management - more direct and open than what you can find in “regular French companies”. Sales Progression Board In May 2012, I passed what we call a ‘Sales Progression Board’ to be promoted to an Inside Sales position. I am now in charge of generating revenue through the sale of Oracle applications on my specific territory. Always keeping in my mind my personal ambition: going to the field one day. Interested to join Oracle in the same role as Mathias? Visit http://campus.oracle.com.

  Read the article

• Introducing the Oracle Linux Playground yum repo

  - by wcoekaer

  We just introduced a new yum repository/channel on http://public-yum.oracle.com called the playground channel. What we started doing is the following: When a new stable mainline kernel is released by Linus or GregKH, we internally build RPMs to test it and do some QA work around it to keep track of what's going on with the latest development kernels. It helps us understand how performance moves up or down and if there are issues, we try to help look into them and of course send that stuff back upstream. Many Linux users out there are interested in trying out the latest features but there are some potential barriers to do this. (1) in general, you are looking at an upstream development distribution, which means that everything changes both in userspace(random applications) and kernel. Projects like Fedora are very useful and someone that wants to just see how the entire distribution evolves with all the changes, this is a great way to be current. A drawback here, though, is that if you have applications that are not part of the distribution, there's a lot of manual work involved or they might just not work because the changes are too drastic. The introduction of systemd is a good example. (2) when you look at many of our customers, that are interested in our database products or applications, the starting point of having a supported/certified userspace/distribution, like Oracle Linux, is a much easier way to get your feet wet in seeing what new/future Linux kernel enhancements could do. This is where the playground channel comes into play. When you install Oracle Linux 6 (which anyone can download and use from http://edelivery.oracle.com/linux), grab the latest public yum repository file http://public-yum.oracle.com/public-yum-ol6.repo, put it in /etc/yum.repos.d and enable the playground repo : [ol6_playground_latest] name=Latest mainline stable kernel for Oracle Linux 6 ($basearch) - Unsupported baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/playground/latest/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 Now, all you need to do : type yum update and you will be downloading the latest stable kernel which will install cleanly on Oracle Linux 6. Thus you end up with a stable Linux distribution where you can install all your software, and then download the latest stable kernel (at time of writing this is 3.6.7) without having to recompile a kernel, without having to jump through hoops. There is of course a big, very important disclaimer this is NOT for PRODUCTION use. We want to try and help make it easy for people that are interested, from a user perspective, where the Linux kernel is going and make it easy to install and use it and play around with new features. Without having to learn how to compile a kernel and without necessarily having to install a complete new distribution with all the changes top to bottom. So we don't or won't introduce any new userspace changes, this project really is around making it easy to try out the latest upstream Linux kernels in a very easy way on an environment that's stable and you can keep current, since all the latest errata for Oracle Linux 6 are published on the public yum repo as well. So one repository location for all your current changes and the upstream kernels. We hope that this will get more users to try out the latest kernel and report their findings. We are always interested in understanding stability and performance characteristics. As new features are going into the mainline kernel, that could potentially be interesting or useful for various products, we will try to point them out on our blogs and give an example on how something can be used so you can try it out for yourselves. Anyway, I hope people will find this useful and that it will help increase interested in upstream development beyond reading lkml by some of the more non-kernel-developer types.

  Read the article

• PHP code works on Chrome, but not on Firefox or IE (send email via HTML form) [on hold]

  - by Cachirro

  My brother has this form: <form id="lista" action="lista2.php" method="post"> <input name="cf_name" type="text" size="50" hidden="yes" class="obscure"> <input name="cf_email" type="text" size="50" hidden="yes" class="obscure"> <textarea name="cf_message" cols="45" rows="10" hidden="yes" class="obscure"> </textarea> <input type="image" name="submit" value="Enviar Lista por Email" src="imagens/lista_email.png" width="40" height="40" onclick="this.form.elements['cf_message'].value = lista_mail;this.form.elements['cf_name'].value = prompt('Escreva o seu nome:', '');this.form.elements['cf_email'].value = prompt('Escreva o seu email:', '');"> <input name="submit2" type="submit" value="Enviar" hidden="yes" class="obscure"> </form> That calls this PHP file: <?php if ( isset($_POST['submit']) ) { // Dados de autenticacao SMTP $smtpinfo['host'] = 'localhost'; $smtpinfo['port'] = '25'; $smtpinfo['auth'] = true; $smtpinfo['username'] = 'xxx'; $smtpinfo['password'] = 'xxx'; // Dados recebidos do formulario $nome = $_POST['cf_name']; $email = $_POST['cf_email']; $mensagem = $_POST['cf_message']; // Inclusão de ficheiro PEAR. Certifique-se que o PEAR está activado no seu alojamento require_once "Mail.php"; // Corpo da mensagem $body = "Nome: ".$nome; $body.= "\n\n"; $body.= nl2br($mensagem); $headers = array ('From' => $email, 'To' => $smtpinfo["username"], 'Subject' => 'Encomenda Website'); $mail_object = Mail::factory('smtp', $smtpinfo); $mail = $mail_object->send($smtpinfo["username"], $headers, $body); if ( PEAR::isError($mail) ) { echo ("<p>" . $mail->getMessage() . "</p>"); } else { echo ('<b><font color="FFFF00">Mensagem enviada com sucesso.<br><br></b>Seu email: ' . $email . '<br><br></font>'); }} ?> This basically sends an email with some selected products, name and email. The problem is that it works perfectly on Chrome, but not on FF or IE. When the submit image is pressed, the URL changes to the PHP file, but it displays a blank page. After display errors activated: ini_set('display_errors',1); ini_set('display_startup_errors',1); error_reporting(-1) FF/IE display blank page and email isn't sent, Chrome sends the email and displays this: Strict Standards: Non-static method Mail::factory() should not be called statically in /var/www/vhosts/[site url]/httpdocs/lista2.php on line 33 Strict Standards: Non-static method PEAR::isError() should not be called statically, assuming $this from incompatible context in /usr/share/php/Mail/smtp.php , dont know if it helps So, what is causing the email to be sent on chrome and not on FF or IE? Thank you.

  Read the article

• Randomely loosing wireless connexion with Cubuntu 12.04

  - by statquant

  I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

  Read the article

• Oracle ZS3 Contest for Partners: Share an unforgettable experience at the Teatro Alla Scala in Milan

  - by Claudia Caramelli-Oracle

  12.00 Dear valued Partner, We are pleased to launch a partner contest exclusive to our partners dedicated to promoting and selling Oracle Systems! You are essential to the success of Oracle and we want to recognize your contribution and effort in driving Oracle Storage to the market. To show our appreciation we are delighted to announce a contest, giving the winners the opportunity to attend a roundtable chaired by Senior Oracle Executives and spend an unforgettable evening at the magnificent Teatro Alla Scala in Milan, followed by a stay at the Grand Hotel et de Milan, courtesy of Oracle. Recognition will be given to 12 partner companies (10 VARs & 2 VADs) who will be recognized for their ZFS storage booking achievement in the broad market between June 1st and July 18th 2014. Criteria of Eligibility A minimum deal value of $30k is required for qualification Partners who are wholly or partially owned by a public sector organization are not eligible for participation  Winners The winning VARs will be: The highest ZS3 or ZBA bookings achievers by COB on July 18th, 2014 in each Oracle EMEA region (1) The highest Oracle on Oracle (2) ZS3 or ZBA bookings achievers by COB on July 18th, 2014 in each Oracle EMEA region The winning VADs (3) will be: The highest ZS3 or ZBA bookings achiever by COB on July 18th 2014 in EMEA The highest Oracle on Oracle (2) ZS3 or ZBA bookings achiever by COB on July 18th 2014 in EMEA  The Prize Winners will be invited to participate to a roundtable chaired by Oracle on Monday September 8th 2014 in Milan and to be guests of Oracle in the evening of September 8th, 2014 at the Teatro Alla Scala. The evening will comprise of a private tour of the Scala museum, cocktail reception at the elegant museum rooms and attending the performance by the renowned Soprano, Maria Agresta. Our guests will then retire for the evening to the Grand Hotel et de Milan, courtesy of Oracle. Oracle shall be the final arbiter in selecting the winners and all winners will be notified via their Oracle account manager.Full details about the contest, expenses covered by Oracle and timetable of events can be found on the Oracle EMEA Hardware (Servers & Storage) Partner Community workspace (FY15 Q1 ZFS Partner Contest). Remember: access to the community workspace requires membership. If you are not a member please register here. Good Luck!! For more information, please contact Sasan Moaveni. (1) Two VAR winners for each EMEA region – Eastern Europe & CIS, Middle East & Africa, South Europe, North Europe, UK/Ireland & Israel - as per the criteria outlined above (2) Oracle on Oracle, in this instance, means ZS3 or ZBA storage attached to DB or DB options, Engineered Systems or Sparc servers sold to the same customer by the same partner within the contest timelines.(3) Two VAD winners, one for each of the criteria outlined above, will be selected from across EMEA. Normal 0 14 false false false IT X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• SEO/Google: How should I handle multiple countries and domains?

  - by Valorized

  Hello. I'm the webmaster of an online shop based in Austria (Europe). Therefore we registered "example.at". We also own different other domain names like "example-shop.com" and "example.info". Currently all those domains are redirected (301) to the .at one. Still available is: "example.net" and "example.org" (and .ws/.cc), unfortunately not available: .de/.eu The .com is currently owned by one of our partners, the contract ends in 2012 but until then we have no chance to get this one. Recently I read more about geo-targeting and I noticed ONE big deal. The tld ".at" is hardly recognised in Germany (google.de) whereas it is excellently listed in Austria (google.at). As a result of the .at I cannot set the target location manually (or to unlisted). More info: https://www.google.com/support/webmasters/bin/answer.py?answer=62399&hl=en This is a big problem. I looked at Google Analytics and - although Germany is 10x as big as Austria - there are more visits from Austria. So, how should I config the domain in order to get the best results in both, Germany and Austria? I thought of some solutions: First I could stop redirecting the .info. Then there would be a duplicate of the .at one. Moreover, in Webmastertools, I could set the target location of the .info to Germany. As the .at still targets Austria, both would be targeted - however I don't now if google punishes one of them because of the duplicate content? Same as 1. but with .net or .org (I think .info is not a "nice" domain and moreover I think search engines prefer .com, .net or .org to .info). Same as 1. (or 2.) but with a rel="canonical" on the new one (pointing to the .at). Con: I don't think this will improve the situation, because it still tells google that the .at one is more important, like: "if .info points to .at, the target may still be Austria". rel="canonical" on the .at pointing to the new (.info or .net or .org). However I fear that this will have a negative impact on the listing on google.at because: "Hey, the well-known .at is not important anymore, so let's focus on the .info which is not well-known." - Therefore: bad position in search results. Redirect .at to the new (.info or .net or .org) with a 301-Redirect. Con: Might be worse than 4, we might loose Page-Rank (or "the value of the page", because google says that page rank is not important anymore). Moreover this might be even more confusing for the customers. In 3. or 4. customers don't get redirected, they do not see the canonical-meta-tag. So, dear experts, please tell me what the best option would be! Thank you very much for your advice in advance and please excuse the long question. I really appreciate this network! Please note: It's exactly the same content AND language. In Austria we speak German.

  Read the article

• Redundant Interconnect with Highly Available IP (HAIP) ??

  - by JaneZhang(???)

    ?11.2.0.2??,Oracle ?????Grid Infrastructure(GI)????Redundant Interconnect with Highly Available IP(HAIP).  ?11.2.0.2??,???????????OS?????????,??HAIP??,?????????????????????  ???GI????,??????????????????,??:   ???,HAIP???????169.254.*.*,????????????HAIP ???1?,???4?(???????),???????????  ??:$ crsctl stat res -t -init NAME           TARGET  STATE        SERVER   STATE_DETAILS Cluster Resources--------------------------------------------------------------------------------ora.cluster_interconnect.haip       1        ONLINE  ONLINE       node2                       #ifconfig -aeth1      Link encap:Ethernet  HWaddr 00:14:22:BD:59:DE  <=====????          inet addr:192.168.10.2  Bcast:192.168.10.255  Mask:255.255.255.0          inet6 addr: fe80::214:22ff:febd:59de/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          RX packets:54297359 errors:0 dropped:0 overruns:0 frame:0          TX packets:58151488 errors:0 dropped:0 overruns:0 carrier:0          collisions:0 txqueuelen:1000           RX bytes:837602539 (798.8 MiB)  TX bytes:3809085161 (3.5 GiB)          Interrupt:169 eth1:1    Link encap:Ethernet  HWaddr 00:14:22:BD:59:DE  <=====????????          inet addr:169.254.185.195  Bcast:169.254.255.255  Mask:255.255.0.0          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1          Interrupt:169 ???????HAIP??cluster interconnect: Cluster communication is configured to use the following interface(s) for this instance  169.254.185.195cluster interconnect IPC version:Oracle UDP/IP (generic)IPC Vendor 1 proto 2ASM ?????? HAIP ??cluster interconnect: Cluster communication is configured to use the following interface(s) for this instance  169.254.185.195cluster interconnect IPC version:Oracle UDP/IP (generic)IPC Vendor 1 proto 2  Oracle????ASM??????HAIP??????????????????????,????????????????????,???????????,????HAIP????????????????,???????????  HAIP ????????????,?????????????????   ??HAIP?????,???My Oracle Support Note ??1210883.1.

  Read the article

• Exception when creating MailMessage

  - by Julien Poulin

  I'm getting a FormatException telling me the address '[email protected]' is invalid (I'm guessing because of the '-'). Here is the code I'm using: var md = new MailDefinition(); md.BodyFileName = physicalPath; md.Subject = subject; md.From = from; md.CC = cc; md.IsBodyHtml = true; MailMessage mailMessage = md.CreateMailMessage(to, replacements, owner); Is there a bug in the .Net e-mail parser? I am sure this address is valid since it belongs to a friend and I have no problem sending and receiving his e-mails with Outlook. Is there a way to fix this? EDIT: Here is the stacktrace: [FormatException: La chaîne spécifiée n'est pas de la forme requise pour une adresse de messagerie.] System.Net.Mime.MailBnfHelper.ReadMailAddress(String data, Int32& offset, String& displayName) +1141755 System.Net.Mail.MailAddress.ParseValue(String address) +240 System.Net.Mail.MailAddress..ctor(String address, String displayName, Encoding displayNameEncoding) +85 System.Net.Mail.Message..ctor(String from, String to) +122 System.Net.Mail.MailMessage..ctor(String from, String to) +114 System.Web.UI.WebControls.MailDefinition.CreateMailMessage(String recipients, IDictionary replacements, String body, Control owner) +1366 System.Web.UI.WebControls.MailDefinition.CreateMailMessage(String recipients, IDictionary replacements, Control owner) +290 WebNotificationManager.CreateMessage(Page owner, MessageTemplate messageTemplate, ListDictionary replacements, String to, String from, String cc, String subject) in c:\dev\SoccerMania\SoccerMania\App_Code\WebNotificationManager.cs:41 WebNotificationManager.SendMessage(Page owner, MessageTemplate messageTemplate, ListDictionary replacements, String to, String subject) in c:\dev\SoccerMania\SoccerMania\App_Code\WebNotificationManager.cs:22 inscription.bInscription_Click(Object sender, EventArgs e) in c:\dev\SoccerMania\SoccerMania\Inscription.aspx.cs:54 System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e) +111 System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +79 System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +175 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1565

  Read the article

• Remove appearance of TextField in droidText : Android

  - by AnujAroshA

  I am trying to create a PDF using droidText library. There I want to place some text content in the middle of the page but align to left. I was unable to do with Paragraph class and setAlignment() method. So I have decided to use TextField class. Below is the code I have used, Document document = new Document(PageSize.A4); try { PdfWriter writer = PdfWriter.getInstance(document, new FileOutputStream(android.os.Environment.getExternalStorageDirectory() + java.io.File.separator + "TextFields.pdf")); document.open(); TextField tf = new TextField(writer, new Rectangle(100, 300, 200, 350), "Content"); tf.setText("This is the content of text field"); tf.setAlignment(Element.ALIGN_CENTER); tf.setOptions(TextField.MULTILINE | TextField.REQUIRED); PdfFormField field = tf.getTextField(); writer.addAnnotation(field); } catch (DocumentException de) { System.err.println(de.getMessage()); } catch (IOException ioe) { System.err.println(ioe.getMessage()); } document.close(); Code works perfect, but the out put PDF file that I am getting has this TextField which can be editable and also change the font appearance when I am click on the TextField. I don't want that in to my final PDF. How can I remove that attribute? If it is not possible, is there any other way I can position some text in a PDF file using droidText library in Android?

  Read the article

• Multiple dex files define Lcom/google/api/client/auth/oauth/AbstractOAuthGetToken;

  - by Elad Benda

  I have just followed this tutorial: https://developers.google.com/drive/quickstart-android so I don't see a reason for duplicated libs in my project. I have added the drive Client lib via Google plugin for eclipse When I build my android app with this manifest <uses-sdk android:minSdkVersion="15" android:targetSdkVersion="16" /> <uses-permission android:name="android.permission.READ_CALENDAR" /> <uses-permission android:name="android.permission.WRITE_CALENDAR" /> <uses-permission android:name="android.permission.READ_EXTERNAL_STORAGE"/> <uses-permission android:name="android.permission.GET_ACCOUNTS"/> <uses-permission android:name="android.permission.INTERNET" /> <application android:icon="@drawable/todo" android:label="@string/app_name" > <activity android:name=".TodosOverviewActivity" android:label="@string/app_name" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name=".TodoDetailActivity" android:windowSoftInputMode="stateVisible|adjustResize" > <intent-filter> <action android:name="android.intent.action.SEND" /> <category android:name="android.intent.category.DEFAULT" /> <data android:mimeType="image/*" /> </intent-filter> </activity> <provider android:name=".contentprovider.MyTodoContentProvider" android:authorities="de.vogella.android.todos.contentprovider" > </provider> </application> I get the following error: [2013-10-27 00:43:58 - Dex Loader] Unable to execute dex: Multiple dex files define Lcom/google/api/client/auth/oauth/AbstractOAuthGetToken; [2013-10-27 00:43:58 - de.vogella.android.todos] Conversion to Dalvik format failed: Unable to execute dex: Multiple dex files define Lcom/google/api/client/auth/oauth/AbstractOAuthGetToken; how can I fix this?

  Read the article

• Changes in resolving .resx in Visual Studio 2010?

  - by MADMap

  Hi, I'm working on a quite simple Webpage (MVC2), using localisation based on ResourceFiles. I have the MVC2 Project and the Resources in a seperate Assembly. The Resources contains 3 languages (Resource.resx, Resource.de.resx, Resource.en.resx, Resource.ja.resx) and I'm querying them via the ResourceManager. Call from the .aspx <% Resources.Res resman = new Resources.Res(); %> <%=resman.GetString("String1", new System.Globalization.CultureInfo("en")) %><br /> <%=resman.GetString("String1", new System.Globalization.CultureInfo("ja")) %><br /> <%=resman.GetString("String1", new System.Globalization.CultureInfo("de")) %><br /> ResourceManager: public class Res { private readonly ResourceManager Manager = Resources.Resource1.ResourceManager; public string GetString(string id, CultureInfo info) { return Manager.GetString(id, info); } } And for the compiled Version in VS2008 I get smth like this: String1EN String1JA String1DE Compiled in Visual Studio 2008, this works fine: but I'm having Troubles if I compile the Solution in Visual Studio 2010 (also 3.5 as TargetFramework). There the result shows smth like: String1DEFAULT String1JA String1DEFAULT I don't know what it can be: is this still a bug from the VS2010 RC or am I doing smth. wrong here?

  Read the article

• Problem using setEmptyView on a ListActivity

  - by Pentium10

  I have the following setup, and the empty view text doesn't show up... protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); getListView().setEmptyView(findViewById(R.id.empty)); getListView().setTextFilterEnabled(true); setListAdapter(null);// to have empty list } The layout file is: <?xml version="1.0" encoding="utf-8"?> <LinearLayout android:id="@+id/myScrollLayout" android:layout_width="fill_parent" android:layout_height="fill_parent" android:orientation="vertical" xmlns:android="http://schemas.android.com/apk/res/android"> <FrameLayout android:layout_width="fill_parent" android:layout_height="0dip" android:layout_weight="1"> <ListView android:id="@android:id/list" android:layout_width="fill_parent" android:layout_height="fill_parent" android:drawSelectorOnTop="false" /> <!-- Here is the view to show if the list is emtpy --> <ScrollView android:id="@android:id/empty" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TextView android:id="@+id/emptyText" android:layout_width="fill_parent" android:layout_height="fill_parent" android:text="@string/contact_empty_help" android:textSize="20sp" android:textColor="?android:attr/textColorSecondary" android:paddingLeft="10dip" android:paddingRight="10dip" android:paddingTop="10dip" android:lineSpacingMultiplier="0.92" /> </ScrollView> </FrameLayout> </LinearLayout> String is defined as: <string name="contact_empty_help">"You don't have any contacts to display.\n\nTo add contacts, you have to:\n \n<li><font fgcolor="#ffffffff">Go to <b>Contacts</b></font> application to create new contacts\n</li> \n<li><font fgcolor="#ffffffff"><b>Import from VCF file</b></font>, this is available in Contacts menu, the file most be on the root of the SD card\n</li>" </string> Since the list is empty, it should show me the text defined. I followed the example from the List8 http://developer.android.com/intl/de/resources/samples/ApiDemos/src/com/example/android/apis/view/List8.html http://developer.android.com/intl/de/resources/samples/ApiDemos/res/layout/list_8.xml

  Read the article

• NoSuchMethod exception thrown in GWT

  - by eb1

  I'm starting to get my feet wet in the latest Google Web Toolkit using the Eclipse plugin on OS X 10.5.8. So far I've been able to get the client up and running, which is great. The server, though, is a different matter. I'm trying to link to a .jar file that has some classes I want to use in a server ServiceImpl class, but it seems to have glommed onto a previous iteration of the .jar - I've added a method, rebuilt the jar, removed the jar from the libraries tab on the GWT project's build path (as well as on the exports) and reincluded the jar. No luck - I'm still getting: [WARN] Exception while dispatching incoming RPC call com.google.gwt.user.server.rpc.UnexpectedException: Service method 'public abstract org.gwtapplication.client.LWDocument org.gwtapplication.client.DocumentService.getDocument()' threw an unexpected exception: java.lang.NoSuchMethodError: org.externalmodel.MyReallyValidClass.toSomething()Ljava/lang/String; at com.google.gwt.user.server.rpc.RPC.encodeResponseForFailure(RPC.java:378) at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC.java:581) ... Caused by: java.lang.NoSuchMethodError: org.externalmodel.MyReallyValidClass.toSomething()Ljava/lang/String; at org.application.server.DocumentServiceImpl.getDocument(DocumentServiceImpl.java:45) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) Eclipse's code sense has no problems resolving the MyReallyValidClass.toSomething() call, and there are no errors with other calls into the externalmodel classes. Any clue where I should be looking?

  Read the article

• C# XMLRPC Multi Threaded newPost something is not right

  - by user1047463

  I recently decided to get my feet wet with c# multi threading and my progress was good until now. My program uses XML-RPC to create new posts on wordpress. When I run my app on the localhost everything works fine and i successfully able to create new posts on wordpress using a multi threaded approach. However when I try to do the same with a wordpress installed on a remote server , new posts won't appear, so when i go to see all posts, the total number of posts remains unchanged. Another thing to note is the function that creates a new post does return the ID of a supposedly created posts. But as I mentioned previously the new posts are not visible when I try to access them in admin menu. Since I'm new to the multithreading I was hoping some of you guys can help me and check if I'm doing anything wrong. Heres the code that creates threads and calls create post function. foreach (DataRow row in dt.Rows) { Thread t = null; t = new Thread(createPost); lock (t) { t.Start(); } } public void createPost() { string postid; try { icp = (IcreatePost)XmlRpcProxyGen.Create(typeof(IcreatePost)); clientProtocol = (XmlRpcClientProtocol)icp; clientProtocol.Url = xmlRpcUrl; postid = icp.NewPost(1, blogLogin, blogPass, newBlogPost, 1); currentThread--; threadCountLabel.Invoke(new MethodInvoker(delegate { threadCountLabel.Text = currentThread.ToString(); })); } catch (Exception ex) { MessageBox.Show( createPost ERROR ->" + ex.Message); } }

  Read the article

• Problem in IE8 with GET Parameters in opening a new windows with javascript.

  - by amfa95

  Hi, I have a problem with IE8 and the opening of a new window with javascript and submitting parameters with special characters. <a href="javascript:oWin('/html/de/4664286/printregistrationcontent.html?12-security question&#61;Wie hei&#223;t Ihr Lieblingsrestaurant','PRINT',800,600);" class="print">Seite drucken</a> The Problem is the letter 'ß' (sharp S). As you can see the string above is encodes due to anti XSS. This link works in FF and IE6 but IE8 is transmitting the URL Parameter as character with code 65*** (don't know the exaxt value). In the opening window you will only see a square (because character with 65000+ is not printable). I also tried to use URL Encoding instead of HTML encoding <a href="javascript:oWin('/html/de/4664286/printregistrationcontent.html?12-security question%3DWie hei%C3%9Ft Ihr Lieblingsrestaurant','PRINT',800,600);" class="print">Seite drucken</a> If i click on this Link in FF or IE6 it works as expected, but IE8 will fail to transmit the "ß" to the server and therefor will also get it back in the wrong way. If i paste this url to the IE8 it will work too, but not if the window is opened by javascript. The Javascript function oWin is defined as follows function oWin(url,title,sizeH,sizeV) { winHandle = top.open(url,title,'toolbar=no,directories=no,status=yes,scrollbars=yes,menubar=no,resizable=no,width='+sizeH+',height='+sizeV); if(navigator.appVersion.indexOf("MSIE 3",0)==-1) id = setTimeout('winHandle.focus()',1000); } If someone has an idea where to look for the reason please answer to this. Thank you amfa

  Read the article

• Is it possible to use Indy 10.5.8.0 with Delphi XE?

  - by jachguate

  The case I'm trying to update the INDY to the latest version for my Delphi XE (Update 1), so I downloaded the latest INDY10 file (Indy_4545.zip) from indy.fulgan.com/ZIP. The packages compiles successfully and I can now even see the new version 10.5.8.0 on the about box dialog, but after a IDE restart I got a message saying: No se encuentra el punto de entrada del procedimiento @Idhttp@TIdCustomHTTP@GetRequestHeaders$qqrv en la biblioteca de vínculos dinámicos IndyProtocols150.bpl. My free translation to English: Entry point not found for procedure @Idhttp@TIdCustomHTTP@GetRequestHeaders$qqrv not found on the dynamic link library IndyProtocols150.bpl. After a quick comparision of old and new IdHTTP.pas I found a lot of changes on the TIdCustomHttp class, including the rename of some methods GetResponseHeaders to GetResponse GetRequestHeaders to GetRequest SetRequestHeaders to SetRequest Along with changed public/published method firms in this and other and classes interfaces. After the update, I got a lot of packages failing to load, including dclcxPivotGridOLAPD15.bpl, which in turns depends on dclDataSnapServer150.bpl which encounters the missing method on the bpl. AFAIK I can't recompile the dclDataSnapServer150.bpl (and maybe other failing packages, I just stopped here). DataSnap and DevExpress support on the IDE is a must for my day to day so The questions Is there a safe pre-established path to update to the newest INDY for Delphi XE? If not, am I on the safe side by just parching the source code by creating the old public methods and call the new ones on the implementation part? am I missing something else or am I really stuck with INDY 10.5.7 until the next Delphi minor/major release?

  Read the article

• Advice needed on best and most efficient practices with developing google apps application...

  - by Ali

  Hi guys , I'm getting my feet wet with developing my order management applications for integration with google apps. However there are certain aspects I need to take into consideration prior to proceeding any further. My application is such that it would upload documents to google documents and store contacts in google contacts. It requires such that a single order can have a number of uploaded documents associated with it as well as some contacts associated with it. MY question however is what would be the most efficient way to implement this. I could keep key tables for both contacts and documents which woudl contain just an ID and link to the documents/contacts or their respective identification id on google. Or I could maintain an exact replica of the information on my own database as well as a link to the contact on google. However won't that be too redundant. I don't want my application to be really slow as I'm afraid that everytime I make a call to google docs to retrieve a list of documents or google contacts it would be really slow on my application - or am I getting worried for no reason? Any advice would be most appreciated.

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >