Search Results

Search found 8990 results on 360 pages for 'response transmitfile'.

Page 197/360 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

  • Who moved this PC here aka Locate which port on switch a PC is plugged into

    - by ggonsalv
    The catch is you have no SNMP access, not even public. The end vision is locate a PC in building easily even if PC's are moved around. The MAC address of the PC is known and the software would run as client on each desktop, reporting back which port the PC was plugged into. Well from a programmer perspective, my network skills are not the best. Yes I could use SNMP, download the MAC port table, load it into SQL, match it to the PC name. Seems alot of work. Lets say I ping a single point from the PC. Would the echo have some thing unique for each device on the same switch? All I need to identify some thing unique for each PC plugged into each port. If the PC was moved from location A to a different location then the unique response would change.

    Read the article

  • Can't ping some IP addresses in the same subnet (LAN) Windows 2011 Server

    - by Ricardo
    Hi I’m running in Windows Small Server 2011 server standard (192.168.1.108), it’s my dhcp and dns server too, but suddenly all other users can’t get internet. My gateway is 192.168.1.1. After a lots of tested I can saw that my server can’t get into the router (192.168.1.1), and also into some others computers, but some other computers answer the ping command. In fact the same computer with the IP 192.168.1.9 didn't answer, but with the IP 192.168.1.63, it response! I have no routers, firewall, vlans or anything that disallow the traffic between computers, in fact when I changed the server IP address (192.168.1.109), I be able to ping the other computers and gateway, but if a back to the 192.168.1.108 the trouble comeback. I hope you can help me with this issue Ricardo

    Read the article

  • Cannot access Azure Portal: We were unable to find any subscriptions associated with your account

    - by Marc
    I am trying to get access to my Windows Azure Portal. Although I can access my user profile which shows two active subscriptions, I cannot access the portal (https://manage.windowsazure.com/). I get redirected to this site: https://manage.windowsazure.com/Error/NoSubscriptions, saying We were unable to find any subscriptions associated with your account. Now, this is a clear issue for the Azure support, but unfortunately, as azure thinks I don't have any subscriptions, I cannot get support, either, because I get redirected to the same error page. I've spent two hours talking and chatting with incompetent support people, i.e.: I've submitted feedback on the azure site but have no idea whether I will ever get a response. Maybe somebody has had this issue before, or can hint me which way to go?

    Read the article

  • How do i find out what's preventing delete requests from working in iis7.5 and iis8?

    - by Simon
    Our site has an MVC Rest API. Recently, both the live servers and my development machine stopped accepting DELETE requests, instead returning a 501 Not Implemented response. On my development machine, which is Windows 7 running IIS7.5, the solution was to add these lines to our Web.config, under system.webServer / handlers: <remove name="ExtensionlessUrlHandler-Integrated-4.0" /> ... <add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE" type="System.Web.Handlers.TransferRequestHandler" resourceType="Unspecified" requireAccess="Script" preCondition="integratedMode,runtimeVersionv4.0" /> However, this didn't work on any of our live servers; not on Sever 2008 + IIS7.5 and not on Server 2012 + IIS8. There are no verbs set up in Request Filtering, and WebDAV is not installed on any of our live servers. The error page gives no further information, and nothing gets recorded in the logs. How do I find out what's preventing DELETE requests from working in iis7.5 and iis8?

    Read the article

  • apache and ajp performance

    - by user12145
    I have an apache sitting in front of two tomcat app servers(one on the same physical server, the other on a different one) that does time consuming work(0.5 sec to 10sec per request). The apache http server is getting killed by an average of 1 to 2 concurrent requests per second. both Server spec is about 2GB of RAM. Is there a way to optimize apache to handle the load? any advise is welcome. BalancerMember ajp://localhost:8009/whoisserver BalancerMember ajp://XXX.XX.XXX.XX:8009/whoisserver I keep getting the following in apache2.2 log: [Mon Dec 28 00:31:02 2009] [error] ajp_read_header: ajp_ilink_receive failed [Mon Dec 28 00:31:02 2009] [error] (120006)APR does not understand this error code: proxy: read response failed from 127.0.0.1:8009 (localhost)

    Read the article

  • nginx+php-fpm help optimize configs

    - by Dmitro
    I have 3 servers. First server (CPU - model name: 06/17, 2.66GHz, 4 cores, 8GB RAM) have nginx as load balancer with next config upstream lb_mydomain { server mydomain.ru:81 weight=2; server 66.0.0.18 weight=6; } server { listen 80; server_name ~(?!mydomain.ru)(.*); client_max_body_size 20m; location / { proxy_pass http://lb_mydomain; proxy_redirect off; proxy_set_header Connection close; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass_header Set-Cookie; proxy_pass_header P3P; proxy_pass_header Content-Type; proxy_pass_header Content-Disposition; proxy_pass_header Content-Length; } } And configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 80 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 pm.status_path = /status ping.path = /ping ;ping.response = pong request_terminate_timeout = 30s request_slowlog_timeout = 10s slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 20 php-fpm processes which use from 1% - 15% CPU. So it's have high load averadge: top - 15:36:22 up 34 days, 20:54, 1 user, load average: 5.98, 7.75, 8.78 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 34.1%us, 3.2%sy, 0.0%ni, 37.0%id, 24.8%wa, 0.0%hi, 0.9%si, 0.0%st Mem: 8183228k total, 7538584k used, 644644k free, 351136k buffers Swap: 9936892k total, 14636k used, 9922256k free, 990540k cached Second server(CPU - model name: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz, 8 cores, 8GB RAM). Nginx configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config of php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 50 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 ;pm.status_path = /status ;ping.path = /ping ;ping.response = pong ;request_terminate_timeout = 0 ;request_slowlog_timeout = 0 ;slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 50 php-fpm processes which use from 10% - 25% CPU. So it's have high load averadge: top - 15:53:05 up 33 days, 1:15, 1 user, load average: 41.35, 40.28, 39.61 Tasks: 239 total, 40 running, 199 sleeping, 0 stopped, 0 zombie Cpu(s): 96.5%us, 3.1%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.4%si, 0.0%st Mem: 8185560k total, 7804224k used, 381336k free, 161648k buffers Swap: 19802108k total, 16k used, 19802092k free, 5068112k cached Third server is server with database postgresql. Also i try ab -n 50 -c 5 http://www.mydomain.ru/ And I get next info: Complete requests: 50 Failed requests: 48 (Connect: 0, Receive: 0, Length: 48, Exceptions: 0) Write errors: 0 Total transferred: 9271367 bytes HTML transferred: 9247767 bytes Requests per second: 1.02 [#/sec] (mean) Time per request: 4882.427 [ms] (mean) Time per request: 976.486 [ms] (mean, across all concurrent requests) Transfer rate: 185.44 [Kbytes/sec] received Please advise how can I make lower level of load average?

    Read the article

  • SMTP error 503 when sending mail with Windows Mail & Mobile Me:

    - by Marty Pitt
    I've started getting an error on my windows machine when sending an email through Windows Mail, using Mobile Me: An unknown error has occurred. Subject 'Test' Server Error: 503 Server Response: 503 5.7.0 TLS already in use. Server: 'smtp.me.com' Windows Live Mail Error ID: 0x800CCC65 Protocol: SMTP Port: 587 Secure(SSL): Yes I've checked and double-checked my credentials, and outbound mail settings, and they're correct. I've deleted and re-added the account, and I get the same issue. I'm able to receive email fine. Note - this issue only affects one PC - my laptop has no issues. Any suggestions on what Error 503 means, or how I would fix this?

    Read the article

  • IIS7 FastCGI downloads quit at 4128760 bytes on slow connections

    - by eingko
    I'm using FastCGI via IIS7 to host a PHP application. For whatever reason downloads that are streamed via PHP (i.e. a script that outputs a file/bytes as a response) download perfectly fine on high-speed connections but on anything slower (even on DSL) quits at EXACTLY 4128760 bytes (~3.9MB) - which makes me think it's a configuration issue... We only started having this problem when we switched from Apache to IIS - this also points to a configuration problem, I think. But if it's a configuration issue, why would it only affect slower connections? Does anyone know where (or how) I could possibly change a setting like this? I've tried changing the idleTimeout, executionTimeout, and activityTimeout values in my web.config but this hasn't helped at all. Any help or direction would be greatly appreciated. Thanks in advance.

    Read the article

  • Unable to access Citrix XenApp 6 published applications externally

    - by Christopher McCann
    We are trying to use a trial of Citrix XenApp 6 Fundamentals to virtualise a couple of applications as a proof of concept. We haven't ever used it before so I confess to be a noob with it. We can connect to the XenApp web interface, and the iPad app will connect and list the applications, but the applications themselves will not load. I discovered in the .ica file that it was attempting to connect to the internal IP address of the server instead of its static external. I have been following various threads on Citrix but nothing seems to have fixed it for me. The server is deployed on an EC2 instance with a static elastic IP. All the ports are opened and I can telnet into the XenApp server on 1493 and I get the ICA response. I have also run on ALTADDR and provided the external IP address. Does anyone have any ideas?

    Read the article

  • when to use squid on server side?

    - by ajsie
    so i have set up apache serving my php pages. i read about squid but don't understand why/how i should use it to speed up my web server. from what i've learned squid is located in same network (or another) and caches content requested by the web browsers, and then when another web browser wants a same page, squid returns that page cached locally, so it never sends a request to the apache server (faster response time for the client, and reduced load for the server). so it seems that squid is for the client side (web browser), and has nothing to do with the server side (apache). but then some people tell others how they have speeded up apache using squid. so im confused. could squid be used on the server side too? and how will it work?

    Read the article

  • Untar after uploading to linux from windows

    - by Miqdad Ali
    I have created tar.gz from my linux server, and I downloaded the same to my linux system and I successfully doen untar with tar -xvf package.tar.gz. And now my issue I downloaded same package.tar.gz to the windows system then uploaded to another linux server, and tried same command tar -xvf package.tar.gz. but it getting tar: This does not look like a tar archive tar: Skipping to next header tar: Exiting with failure status due to previous errors as response. I also tried filezill manual trnasfer with binary mode. How can I do the same ? Update When I directly download to the linux system its working fine. When I downloaded to the windows system and try to extract with 7zip or winrar error is getting When I download to windows and upload to linux same error getting

    Read the article

  • Keyboard / mouse freeze

    - by ajvb
    Hello, Pretty much on a daily basis the keyboard & mouse on my Dell PC stop responding. I have left the PC on for over 10 minutes but still no response so I have to power on / off. Keyboard / mouse then work fine. I did have 2 mice attached to the PC but I have now removed one to see if this makes any difference. CPU temperatures are 51C & 48C - dont know whether this is normal or high? OS is Windows 7. Adrian

    Read the article

  • Downstream to server periodically dropping and spiking

    - by dauphic
    I have a server located in Canada. I'm experiencing that, when connecting from the south-eastern US (southern California, Arizona), I see my downstream on connections to this server periodically drop to 0 for 1-3 seconds, then spike in the next second and receive all of the data that should have been received during the drop off period. This doesn't happen in regular intervals, but it does happen often, usually once every 5-10 seconds. I've gotten trace routes from users with various ISPs and locations, but I'm not seeing any spikes or drop offs in response times, or any sort of packet loss. I'm guessing this is because ICMP is prioritized, though. It seems like a misbehaving router along the way, but I have no idea how to figure out where the problem lies (let alone if there's any way to work around it). Is there any way for me to diagnose this problem?

    Read the article

  • Xcode find in document stuck in case-sensitive

    - by mjdth
    When in Xcode editing code for my objective C files, I often press Command-F to bring up the little Find-In-Document banner across the top. Sometimes this gets stuck in case-sensitive search, and when it does that it also won't loop through the entire document and sometimes won't even display the selected found string. I can't find any options to turn off the case sensitivity, and I never intentionally turned it on. I've restarted xcode several times hoping that would be it but it's changed nothing. Slightly off-topic, but this was the best place I could think of to ask this question. Thanks for any response!

    Read the article

  • I need a few minutes of dedicated server a week, but not for hosting, just to convert ogg etc.

    - by talkingnews
    I'm completely happy with my webhosting, it's just that I need to do one little thing they won't allow, and that's run an instance of Sox to convert about 30 mp3s to ogg files, in various directories, a couple of times a week, to be done automatically in response to the detection of the upload of an mp3. Probably looking at a minute of server time over the whole week. I've had unhelpful suggestions on other forums like "why not leave your home PC on 24 hours a day and then use all your isp bandwidth to do this", which doesn't work for me. I know that I can host files on, say, Amazon S3, but is there something similar for my needs? All it would need to do would be: wget/ftp the mp3 files, convert them to ogg, ftp the files back to my hosting. Of course, all this wouldn't be needed if there was such a thing as a compiled binary of Sox (or any mp3ogg converter) for Centos which I could upload without needing root access, but I've given up asking that one, but always open to suggestions!

    Read the article

  • is there any Open Source solution for Failover of incoming Traffic?

    - by sahil
    Hi, We have two ISP... and both ISP's Ip Nat with same Webserver IP, i want failover for incoming traffic , is there any open source solution? can i do it by making two name server , one for each ISP? ... I am not sure but as per my knowledge primary and secondary name server will reply in round robin method till they are live , once any name server will be unreachable then only another will be reply...so if i am right then i think i can do incoming failover by making two name server in my office... Waiting for your valuable response... Thanking you, Sahil

    Read the article

  • Setting up routing for MS DirectAccess to a VMWare EsXi Host

    - by Paul D'Ambra
    I'm trying to set up DirectAccess on a virtual machine so I can demonstrate it's value and then if need be add a physical machine to host it. I'm hitting a problem because the Direct Access machine (DA01) needs to have 2 public addresses actually configured on the external adapter but there is a Zyxel Zywall USG300 between the VMware ESXi host and the outside world. I've summarised my setup in this diagram If I ping from the LAN to 212.x.y.89 I get a response but if I ping from the VM I get destination host unreachable. I used "route add 212.x.y.89 192.c.d.1" and get request timed out. At that point I see outbound traffic allowed on the Zyxel firewall but nothing coming back. I'm past my understanding of routing and VMWare so am not sure how to tie down where my problem lies (or even if this setup is possible). So any help massively appreciated. Paul

    Read the article

  • Personal DNS server and fallback outside home

    - by Jens
    I have my own DNS server at home to access local names, and that is working fine. Then I have my laptop, now obviously my laptop leaves the home now and then, therefore it accesses different nets outside my home, and my DNS server is not accessible there... So I figured that I would just add Google as secondary DNS... But actually, when I do that, then suddenly I can't access my local stuff (at home that is, obviously), like my laptop is getting a quicker response from Google's DNS or something, because it can't find anything on the addresses I use locally. If I then remove the secondary DNS, and keeps my own, then it works fine again... So do I somehow need to seperate what DNS's to use on what nets? I already use sepperate DNS settings when I connect using my 3G modem, but when I use hotspots it seems to use the same settings regardless (at least in the train), also can it differ wired connections?... Is there another solution?

    Read the article

  • windows service application run fine on windows XP but crashes on windows7

    - by Abbas Siddiqui
    I am sorry If my question asked before, I search extensively but didn't found. If present please post the link of that question. I have developed windows service that works fine on windows xp , when I installed it on windows7 it installed and works fine for few minutes, after that is crashes and gives the following error message. has stopped working windows is checking for the solution to the problem. the log entry is as follows Fault bucket 1155193276, type 5 Event Name: CLR20r3 Response: Not available Cab Id: 0 Problem signature: P1: windowsserviceapp.exe P2: 1.0.0.0 P3: 4bf29a85 P4: System.Windows.Forms P5: 2.0.0.0 P6: 4a275ebd P7: 16cf P8: 159 P9: System.ComponentModel.Win32 P10: Attached files: C:\Users\DELL\AppData\Local\Temp\WERF98D.tmp.WERInternalMetadata.xml These files may be available here: C:\Users\DELL\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_windowsserviceap_89ea5da5168ff1535681aa613b5f7bf2b1636dc_111d24f1 Analysis symbol: Rechecking for solution: 0 Report Id: 24dc8c83-62a1-11df-b1ee-00271352d813

    Read the article

  • Re-assembling the RAID-5 array reboots my CentOS-5 machine

    - by xraminx
    I have 3 HDD's, each divided into 3 partitions. I had created a RAID-1 for boot partition md0 created from sda0, sdb0 and had also created two RAID-5 arrays: md1 created from sda1, sdb1, sdc1 md2 created from sda2, sdb2, sdc2 It used to work fine but one day I had to power off the machine (cold reboot) to get any response from the machine. After that, when the system started booting, it tried for a while to reconstruct the RAID arrays but after a few minutes it crashed silently. I booted the system in linux rescue mode from the DVD and tried to re-assemble the RAID devices manually. I was able to re-assemble md0 and md1 using: mdadm --assemble --scan /dev/md0 mdadm --assemble --scan /dev/md1 But when I try to re-assemble md2 using: mdadm --assemble --scan /dev/md2 the system reboots silently again. How can I fix this problem?

    Read the article

  • Browsers ignoring hosts file

    - by madkris
    Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

    Read the article

  • Browsers ignoring hosts file

    - by madkris
    Until recently my browsers started to ignore my hosts file. I have Windows 7 operating system installed. 192.168.0.5 livesite.com I have tried: Clearing browser cache Issued "ipconfig /flushdns" from the command line Issued "ping livesite.com" from the command line (response was "Reply from 192.168.0.5: bytes=32 time=1ms TTL=128") Restarting unit Backing up original hosts file and making a new one Checking lmhosts.sam (everything is commented out) Connecting directly to modem using cable Checked \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Tried it on another laptop with exactly the specs as I have Then I tried Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser ok but only for a sec) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Changing entry to "127.0.0.1 livesite.com" (ping ok, browser ok) Changing entry to "192.168.0.5 livesite.com" (ping ok, browser not ok) Issued "ipconfig /flushdns" from the command line (ping ok, browser not ok) Any idea why it worked for a moment? Or better yet anything I havent tried or some error I may have overlooked?

    Read the article

  • Printing to shared printers across VPN

    - by CYMR0
    I have a program that prints labels at five remote sites. Two sites, aren't working, but the rest are with an identical (as far as I can tell) setup. Using Wireshark, I have determined that the handshaking all goes well, but after the "Open Print File Response" the packet that is sent from the server, doesn't reach the client. But I'm a bit at a loss as to where I go from here. I know the port the packet was sent on (445) isn't being blocked, the RST packet gets sent on the same port and that gets there fine. It's also weird that the three out of five sites are working fine. This has been up and running for years without issue, all that we have changed is our connectivity (from DSL to bonded DSL). But this traffic is over a VPN - so it can't be the ISP interfering either can it? I'm totally stuck, and any help would be much appreciated. Thanks!

    Read the article

  • Unable to find valid certification path to requested target while CAS authentication

    - by Dmitriy Sukharev
    I'm trying to configure CAS authentication. It requires both CAS and client application to use HTTPS protocol. Unfortunately we should use self-signed certificate (with CN that doesn't have anything in common with our server). Also the server is behind firewall and we have only two ports (ssh and https) visible. As far as there're several application that should be visible externally, we use Apache for ajp reverse proxying requests to these applications. Secure connections are managed by Apache, and all Tomcat are not configured to work with SSL. But I obtained exception while authentication, therefore desided to set keystore in CATALINA_OPTS: export CATALINA_OPTS="-Djavax.net.ssl.keyStore=/path/to/tomcat/ssl/cert.pfx -Djavax.net.ssl.keyStoreType=PKCS12 -Djavax.net.ssl.keyStorePassword=password -Djavax.net.ssl.keyAlias=alias -Djavax.net.debug=ssl" cert.pfx was obtained from certificate and key that are used by Apache HTTP Server: $ openssl pkcs12 -export -out /path/to/tomcat/ssl/cert.pfx -inkey /path/to/apache2/ssl/server-key.pem -in /path/to/apache2/ssl/server-cert.pem When I try to authenticate a user I obtain the following exception: Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174) ~[na:1.6.0_32] at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238) ~[na:1.6.0_32] at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:318) ~[na:1.6.0_32] Meanwhile I can see in catalina.out that Tomcat see certificate in cert.pfx and it's the same as the one that is used while authentication: 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Constructing validation url: https://external-ip/cas/proxyValidate?pgtUrl=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_proxyreceptor&ticket=ST-17-PN26WtdsZqNmpUBS59RC-cas&service=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_check 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. keyStore is : /path/to/tomcat/ssl/cert.pfx keyStore type is : PKCS12 keyStore provider is : init keystore init keymanager of type SunX509 *** found key for : 1 chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** trustStore is: /jdk-home-folder/jre/lib/security/cacerts Here is a lot of trusted CAs. Here is nothing related to our certicate or our (not trusted) CA. ... 09:11:39.731 [http-bio-8080-exec-4] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. Allow unsafe renegotiation: false Allow legacy hello messages: true Is initial handshake: true Is secure renegotiation: false %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 63, 239, 180, 32, 103, 140, 83, 7, 109, 149, 177, 80, 223, 79, 243, 244, 60, 191, 124, 139, 108, 5, 122, 238, 146, 1, 54, 218 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA, TLS_EMPTY_RENEGOTIATION_INFO_SCSV] Compression Methods: { 0 } *** http-bio-8080-exec-4, WRITE: TLSv1 Handshake, length = 75 http-bio-8080-exec-4, WRITE: SSLv2 client hello message, length = 101 http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 81 *** ServerHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 145, 237, 232, 63, 240, 104, 234, 201, 148, 235, 12, 222, 60, 75, 174, 0, 103, 38, 196, 181, 27, 226, 243, 61, 34, 7, 107, 72 } Session ID: {79, 202, 117, 79, 130, 216, 168, 38, 68, 29, 182, 82, 16, 25, 251, 66, 93, 108, 49, 133, 92, 108, 198, 23, 120, 120, 135, 151, 15, 13, 199, 87} Cipher Suite: SSL_RSA_WITH_RC4_128_SHA Compression Method: 0 Extension renegotiation_info, renegotiated_connection: <empty> *** %% Created: [Session-2, SSL_RSA_WITH_RC4_128_SHA] ** SSL_RSA_WITH_RC4_128_SHA http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 609 *** Certificate chain chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** http-bio-8080-exec-4, SEND TLSv1 ALERT: fatal, description = certificate_unknown http-bio-8080-exec-4, WRITE: TLSv1 Alert, length = 2 http-bio-8080-exec-4, called closeSocket() http-bio-8080-exec-4, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target I tried to convert our pem certificate to der format and imported it to trustedKeyStore (cacerts) (without private key), but it didn't change anything. But I'm not confident that I did it rigth. Also I must inform you that I don't know passphrase for our servier-key.pem file, and probably it differs from password for keystore created by me. OS: CentOS 6.2 Architecture: x64 Tomcat version: 7 Apache HTTP Server version: 2.4 Is there any way to make Tomcat accepts our certificate?

    Read the article

  • Recommended RAM and disc space for Oracle 11g on Windows

    - by Álvaro G. Vicario
    I need to provide the recommended amount of RAM and disc space (divided in two partitions) so the customer can create an appropriate virtual machine to run Oracle. All I could find in the documentation was a brief listing with minimum RAM and typical/advanced install types. The virtual machine will run latest Oracle Standard Edition One (11g release 2 so far) under Windows Server 2008 x64 and will host a reasonably low traffic web application. How much RAM and disc must I ask for in order to be safe? (Feel free to ask for further details if I've omitted something relevant.) Update: Rough estimations: Database size: 10 MB after installation Growth rate: +3MB per day on average Size of database 'active' data: (not sure of what this means, there's not actual archive so I guess all data is current) Amount of data written per second in peak hours: a few KB Number of client sessions: 3 or 4 at most Frequency and response size of most heavy requests: some reports make heavy table JOINS that need up to 20 seconds to complete but they won't return more than a few thousand rows with plain text. The app also handles BLOBs (typical size from 50KB to 200KB)

    Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >