Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 198/1036 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Wireless not working on desktop with Asus USB-N13 (B1) wireless adapter

  - by user900749

  I am trying to connect my desktop to a wireless network. I have purchased an ASUS USB-N13 B1 adapter. I have followed instructions for installing drivers and disabling conflicting drivers. I have thoroughly searched and could not find a solution. The adapter is recognized and powered on. I have entered the ssid and password information into the wireless network configuration. Other machines can connect to this wireless network, and the machine can connect online via ethernet without issue. Here is the output of some commands which summarize my configuration, and might give some clues : ~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" ~$ uname -a Linux petra 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ~$ lsusb Bus 001 Device 006: ID 0b05:17ab ASUSTek Computer, Inc. ~$ dmesg [ 1883.823150] wlan0: authenticate with 48:5b:39:e7:25:5e (try 1) [ 1884.020027] wlan0: authenticate with 48:5b:39:e7:25:5e (try 2) [ 1884.220025] wlan0: authenticate with 48:5b:39:e7:25:5e (try 3) [ 1884.420023] wlan0: authentication with 48:5b:39:e7:25:5e timed out Any assistance would be appreciated as I have been trying to get this machine online for several weeks now to no avail. Sincerely, Michael.

  Read the article

• How to restore Windows 7 MBR without a CD

  - by Brandon Bertelsen

  I have been playing with Ubuntu for a few weeks now, and I'd like to revert my computer back to it's original - factory - defaults. On the computer I have a recovery partition (it's a netbook). I went through the process of recovery and everything seemed fine. However, when I restart the computer I'm presented with grub rescue > Now, my understanding is that when I installed Ubuntu "side by side" it replaced the MBR or something like it, with GRUB. I've read on a slew of forums, that I need to use a Windows Recovery Disk. Here are my issues: a) I don't have a recovery disk, I have a recovery partition - it's a netbook. b) I don't have an external cd drive. What I do have is a USB key that has about 1gb of space on it. Thanks in advance.

  Read the article

• Is it safe to resize root partition?

  - by binW

  My HDD is partitioned into two equal sized partitions. First is being used for Windows and Second for Ubuntu. Everything is working fine. But now I want to remove Windows and use the disk completely for Ubuntu. I can easily boot from live cd and use GParted to delete Windows partition and then expand Ubuntu partition to use the whole hard disk. But I want to know if its safe i.e Will resizing Ubuntu partition change any thing else like the partition UUID or any thing else? Do I need to reinstall grub after resizing the root partition? It would be great if some one who has already done this can give their advice here.

  Read the article

• probability of trouble-free upgrade

  - by intuited

  One of the problems with recommending Ubuntu to potential future users, especially those not particularly given to technical endeavours, is that there is a chance that upgrades will break their machine, and they'll have to pay or otherwise coerce some knowledgeable person into fixing them. In my limited experience of running successive versions of Ubuntu since 8-something on a couple of different laptops, this chance is quite high. I'm not sure if I'm just unlucky with the hardware that I'm using, or if it's a result of the higher-than-average number of packages I have installed, or if upgrades are just typically problematic. So I'd like to know the likelihood, for a casual user, of doing a release upgrade, for example from 10.04 to 10.10, without experiencing any regression bugs. Obviously this is dependent on the hardware that people are running. Canonical seems to be making some efforts towards collecting data on this, for example with the "I am affected by this bug" checkbox on their issue tracker, and with the laptop compatibility reports, but I've not seen anything comprehensive. I'm hoping for an objective reference here, for example a study carried out by relatively unbiased individuals. However, anecdotal evidence is probably useful too.

  Read the article

• missing libjpeg.so.62 from ia32 shared library

  - by user170200

  I am trying to install a chemical/molecular biology modeling program called Molsoft ICM-Pro. Initially after downloading the program and trying to open, it gave me error messages that I was missing shared libraries, and after talking with my network administrator he recommended I install the ia32 shared libraries using sudo apt-get install ia32-libs Which gives sudo apt-get install ia32-libs Reading package lists... Done Building dependency tree Reading state information... Done ia32-libs is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. so I am assuming the libraries installed correctly, but now when I try to run the program I get this error: ubuntu:/home/reilly/icmd icm icm: error while loading shared libraries: libjpeg.so.62: cannot open shared object file: No such file or directory So my question is, where can I get the library containing libjpeg.so.62? Additionally, I was told I would need libXmu.so.6 and libtiff.so.3 . Is there a shared library that could be missing that would contain these files? I am an ubuntu noob, so sorry if the information I provided was unclear. Any help would be immensely appreciated! btw I am using ubuntu 12.04 dual boot with windows on an HP pavilion dv6

  Read the article

• minidlna and samsung tv file format doesn't support

  - by Vasya

  I have PC with XUbuntu 12.04 and Samsung 27A950, so I want to use my PC like dlna server. But I can run file of any format on my TV, get error: "File format doesn't support". I try to open *.avi, *.mkv and *.jpg files the same result. In error log I can see: [2013/06/27 12:34:03] upnphttp.c:1907: error: Error opening /home/family/media/file1.mkv [2013/06/27 12:34:06] upnphttp.c:1907: error: Error opening /home/family/media/file2.avi So, I have no idea why it doesn't work. Any suggestions? miniDLNA version: Version 1.24.1-stedy Config file is default, only few directories added. With version of the default Ubuntu repository was the same. Some time ago I tried mediatomb, had the same error.

  Read the article

• What package creates /usr/lib/jvm/default-java?

  - by François Beausoleil

  I'm trying to setup Jenkins on 11.10 using only Ubuntu-provided packages. After apt-get install jenkins, Jenkins won't start. I traced it to an absent /usr/lib/jvm/default-java/bin/java. Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-===============================-=======================================-============================================================================== ii jenkins 1.409.1-0ubuntu4.2 Continuous Integration and Job Scheduling Server ii openjdk-6-jre 6b24-1.11.3-1ubuntu0.11.10.1 OpenJDK Java runtime, using Hotspot JIT # update-alternative --config java There is only one alternative in link group java: /usr/lib/jvm/java-6-openjdk/jre/bin/java Nothing to configure. What package creates /usr/lib/jvm/default-java ?

  Read the article

• What does the `dmesg` error: "composite sync not supported" mean?

  - by M. Tibbits

  Question: I see [ 20.473125] composite sync not supported and several such entries when I run dmesg. What do they mean? Background: I'm trying to debug a problem where my laptop won't suspend. Since acpi seems happy and I can suspend easily from the command line, I've turned to tracking down all boot-up errors/warnings. So I run dmesg | grep not and, amongst other shtuff, I get: 728:[ 17.267120] composite sync not supported 733:[ 18.009061] composite sync not supported 740:[ 18.159289] registered panic notifier 749:[ 18.162500] vga16fb: not registering due to another framebuffer present 757:[ 18.598251] composite sync not supported 776:[ 20.473125] composite sync not supported 777:[ 20.932266] composite sync not supported 778:[ 28.350231] composite sync not supported 779:[ 28.924913] composite sync not supported 780:[ 35.480658] composite sync not supported And the full log for the few lines right around that first appearance (line 728) is listed at the bottom of my post (I'd happily include anything else). Any ideas what could be causing this? I've read several sites: Ubuntuforums #1 IRC Chat #1 One post talks about ??Adobe flash?? causing this error? Some others also suggest that it might be an nvidia related problem, but I've got a Dell Latitude D630 with an integrated Intel graphics -- so nvidia isn't the problem. [ 17.207142] phy0: Selected rate control algorithm 'minstrel' [ 17.207833] Registered led device: b43-phy0::tx [ 17.207849] Registered led device: b43-phy0::rx [ 17.207865] Registered led device: b43-phy0::radio [ 17.207927] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 17.267120] composite sync not supported [ 17.415795] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 17.602131] [drm] initialized overlay support [ 17.620201] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 17.641192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.009061] composite sync not supported [ 18.106042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.108115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 18.108941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.109676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.110356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.159286] fb0: inteldrmfb frame buffer device [ 18.159289] registered panic notifier [ 18.160218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 18.160286] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 18.160334] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 18.160432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 18.160491] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 18.160539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.162494] vga16fb: initializing [ 18.162497] vga16fb: mapped to 0xc00a0000 [ 18.162500] vga16fb: not registering due to another framebuffer present [ 18.176091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 18.176123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.285752] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 18.312497] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.312586] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.328043] usbcore: registered new interface driver ndiswrapper [ 18.460909] Console: switching to colour frame buffer device 180x56 [ 18.598251] composite sync not supported

  Read the article

• Looking for mass cropping software

  - by Bart van Heukelom

  I'm looking for a tool than runs on Ubuntu that can let me: Open an image in a folder which has thousands Crop and rotate it Save as a copy, automatically named (not manually), with one click. Preferably with something in the name that I can later use to filter these cropped copies in Nautilus (unless it saves in another directory, that'd be even better). Move to next image and repeat Does it exist?

  Read the article

• After re-installing ubuntu 13.10, stuck at GRUB Rescue, Boot-Repair didn't work!

  - by user205691

  Because i could not get the WiFi login work, i thought i will reinstall ubuntu, with internet connection to have updated drivers for wireless & graphics etc. I have deleted earlier linux partitions usings gparted and re-installed ubuntu 13.10, exactly following the same steps as i did earlier, making a 100GB /home on dev/sda and pointing root to /dev/sdb (SSD) and swap on dev/sda/ . Installing boot on /dev/sdb. But, somehow i think the grub is either corrupted or removed because i am unable to boot the laptop to any OS now. I get the following message: "no such device" xxxxx followed by huge HEX number GRUB rescue when i type ls on Grub rescue prompt, i can see hd0 & hd1, but thats about it. i tried Boot-repair but it is unable to fix the problem. The following log is generated via boot-repair create log: Boot-repair log I am unable to boot into windows or linux at the moment and need help to fix the grub so i can boot !!

  Read the article

• Acer Wireless Network not working

  - by pico

  I installed Ubuntu 12.04 64 Bit desktop version in acer AspireE1-470. Everything work great except Wireless and touch pad. When i run additional driver there nothing to activate and when i run "rfkill list" it's show 0: hci0:bluetooth Soft blocked: yes Hard Blocked: no 1: acer-wireless: Wireless Lan Soft blocked: no Hard blocked: no I don't know too much command in linux and i hv no i ieda hot to work wireless and touch-pad

  Read the article

• Error installing avogadro with CMake 'lconvert: could not exec No such file or directory'

  - by Orr22

  I'm brand new in ubuntu. I'm trying to install Avogadro. The program need the following packages, which I could install: CMake - OpenBabel 2.3.2 - Qt4 - Git - Eigen2. Here it is the recepy to install the : cd $HOME/src git clone git://github.com/cryos/avogadro.git mkdir -p $HOME/build/avogadro cd $HOME/build/avogadro cmake $HOME/src/avogadro make -j2 sudo make install It was unable to compile, but when I skipped the 'git clone' step it seemed to work just fine. After several stops during the CMake compiling process (software actualizations, get Doxygen, get flex, get bison) I was able to compile. But when I introduce the 'make -j2' command the installation stops as follows: Orr22@javi-87:~/build_avogadro$ make -j2 [ 0%] Built target elementcolor [ 0%] Built target bsdyengine [ 2%] Built target spglib [ 3%] Built target navigatetool [ 4%] Built target tubegen [ 4%] Generating libavogadro_hu.qm [ 6%] Built target OpenQube [ 6%] Generating moc_animation.cxx lconvert: could not exec '/usr/lib/i386-linux-gnu/qt5/bin/lconvert': No such file or directory make[2]: *** [libavogadro/src/libavogadro_hu.qm] Error 1 make[2]: *** Se espera a que terminen otras tareas.... make[1]: *** [libavogadro/src/CMakeFiles/avogadro.dir/all] Error 2 make: *** [all] Error 2 Any suggestions to proceed? Thanks in advance, Orr22

  Read the article

• Getting Xbox Live via a wired network with my laptop that has internet access wirelessly

  - by Alex Franco

  I'm running the latest version (as of yesterday anyways) of Ubuntu Desktop 64bit, but installed on my laptop if it makes a difference. I had Windows 7 preinstalled when i bought it and it worked fine with the wireless from my house and bridging the connection with a LAN to my xbox for Live. Now with Ubuntu I tried the same setup, but I'm unfamiliar with Ubuntu so I didn't get far. Best I got so far is wireless internet on my laptop and a wired connection to the xbox that continually connects and disconnects. Heres my network settings. if theres fields not included its because theyre empty on mine or theyre my MAC address or network password Wireless Network 1 settings: Connect Automatically: Checked. Available to all Users: Checked Wireless: SSID: Franco's Mode: Infrastructure MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Wired Network 1: Connect Automatically: Checked Available to all Users: Checked Wired: MTU: Automatic IPv4 Settings: Method: Automatic (DHCP) IPv6 Settings: Method: Automatic Any help would be greatly appreciated. EDIT: 6:26pm It seems to be staying connected now. Doing the Network test on my xbox it pickups the network, but cannot detect any PC. Restarting the Xbox, however, leaves my computer unable to connect bringing up the Wire Network disconnected 'blip' every minute or so again. Before I had restarted the Xbox it said "Connected 100 MB/s". Now it only says "connecting". I did have my computer and xbox on in this Wired Network Disconnected blip cycle for a long period of time so it may have finally connected, just without the ability to detect my laptop. I left for 2 hours or so in the middle of typing up the original question. I finished posting this when i got back and then tried to mess with it a bit again, in case youre wondering why i didnt include this before... I've said too much. Forgive my long-winded fingers :p

  Read the article

• Applying languages / locale selectively: is it possible?

  - by Aron Rotteveel

  I am a Dutch user and prefer the my local date & time format, system wide. I have no trouble speaking or understanding English and find it very useful to have the rest of my system configured in English to make my life easier when I need to Google a term, for example. Is it possible to apply the a local date/time/currency/etc. format to the system, while maintaining English menu & dialog captions? EDIT: output from locale and posted screens of current settings: LANG=en_US.utf8 LANGUAGE=en LC_CTYPE="en_US.utf8" LC_NUMERIC="en_US.utf8" LC_TIME="en_US.utf8" LC_COLLATE="en_US.utf8" LC_MONETARY="en_US.utf8" LC_MESSAGES="en_US.utf8" LC_PAPER="en_US.utf8" LC_NAME="en_US.utf8" LC_ADDRESS="en_US.utf8" LC_TELEPHONE="en_US.utf8" LC_MEASUREMENT="en_US.utf8" LC_IDENTIFICATION="en_US.utf8" LC_ALL=

  Read the article

• How do I install on an UEFI Asus 1215b netbook?

  - by Tarek

  I'm trying to install Ubuntu 11.10 on a UEFI netbook Asus 1215b using an USB stick. I created a fat32 efi partition of 100MB, 2GB swap, and 2 ext4 partitions (for root (/ ) and /home, respectively). While installing, Ubuntu switches to CLI and starts running efibootmgr. After a few commands (sadly I don't have a screen grab), it stops displaying text but it's still running judging by the HDD led. Then, there's a weird graphic glitch and the screen turns off (HDD led still indicating activity). Finally, it just stops, but doesn't turn off. Not even a hard reboot works (holding down the power button a few secs). I have to plug the netbook off and remove the battery. After that, it still doesn't boot Ubuntu... Anyway, what can I do? I'm considering following the footsteps here and here. Edit: here is the syslog $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] BUG: unable to handle kernel paging request at 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] IP: [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] PGD 14ecc067 PUD 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Oops: 0000 [#1] SMP $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CPU 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Modules linked in: cryptd aes_x86_64 ufs qnx4 hfsplus hfs minix ntfs msdos xfs reiserfs jfs bnep parport_pc rfcomm dm_crypt ppdev bluetooth lp parport joydev eeepc_wmi asus_wmi sparse_keymap uvcvideo videodev v4l2_compat_ioctl32 snd_hda_codec_realtek snd_seq_midi snd_hda_codec_hdmi snd_hda_intel snd_hda_codec arc4 snd_rawmidi snd_hwdep psmouse snd_pcm snd_seq_midi_event ath9k serio_raw sp5100_tco i2c_piix4 k10temp snd_seq mac80211 snd_timer ath9k_common ath9k_hw snd_seq_device ath snd cfg80211 soundcore snd_page_alloc binfmt_misc squashfs overlayfs nls_iso8859_1 nls_cp437 vfat fat dm_raid45 xor dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c usb_storage uas radeon video ahci libahci ttm drm_kms_helper drm wmi i2c_algo_bit atl1c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Pid: 28432, comm: efibootmgr Not tainted 3.0.0-12-generic #20-Ubuntu ASUSTeK Computer INC. 1215B/1215B $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP: 0010:[<ffff880066d44c1f>] [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP: 0018:ffff88005e2cbab0 EFLAGS: 00010082 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RAX: 00000000ffe1867c RBX: 0000000000000009 RCX: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RDX: 0000000000000000 RSI: ffff88005e2cbbea RDI: ffff88005e2cbb40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RBP: 00000000ffe1867c R08: 0000000000000000 R09: 0000000000000084 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R10: ffffc9001101ff83 R11: ffffc90011018685 R12: 0000000000000001 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R13: 0000000000000000 R14: ffffc9001101867c R15: ffff88005e2cbbe1 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] FS: 00007f9cdde13720(0000) GS:ffff880066a00000(0000) knlGS:0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c CR3: 000000002dace000 CR4: 00000000000006f0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Process efibootmgr (pid: 28432, threadinfo ffff88005e2ca000, task ffff880014f0dc80) $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Stack: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc90011010000 ffff88005e2cbac8 0000000000010000 ffff880066d4401d $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] 000000000000007c ffff880009e84400 0000000000000090 ffff880066d45738 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc9001101867c ffff880066d4331c 0000000000000009 ffffc9001101867b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Call Trace: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9c2d>] ? open+0x10d/0x1b0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8116554b>] ? __dentry_open+0x2bb/0x320 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9b20>] ? bin_vma_open+0x70/0x70 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811849ee>] ? vfsmount_lock_local_unlock+0x1e/0x30 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8104303b>] ? efi_call5+0x4b/0x80 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81042a7f>] ? virt_efi_set_variable+0x2f/0x40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff814bb125>] ? efivar_create+0x1e5/0x280 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9d63>] ? write+0x93/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9de4>] ? write+0x114/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167813>] ? vfs_write+0xb3/0x180 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167b3a>] ? sys_write+0x4a/0x90 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815f22c2>] ? system_call_fastpath+0x16/0x1b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Code: ec 01 75 f0 41 bc 01 00 00 00 e8 e5 fb ff ff e8 e4 fc ff ff 33 c0 44 0f b7 c0 66 3b c3 73 20 41 0f b7 c0 41 0f b7 d0 03 c5 8b c8 <8a> 00 42 38 04 3a 75 0a 66 45 03 c4 66 44 3b c3 72 e2 33 c0 66 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP <ffff88005e2cbab0> $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ---[ end trace 493844b002da4787 ]---

  Read the article

• Gnome Do does not autostart and save shortcut in 11.10

  - by Matt

  For some reason the autostart of Gnome-Do will not work in 11.10. I've installed Gnome-Do via the Ubuntu Software Center. Then I changed the shortcut to launch Gnome-Do and marked the option to autostart Gnome-Do within Gnome-Do. In order to verify the autostart, I checked whether it's also found in the autostart applications (which it was). However, upon every restart I have to start Gnome-Do manually via the unity launcher and change the shortcut again.

  Read the article

• Slow Wireless Reconnect After Suspend - Broadcom 4312 with STA drivers

  - by nrhine1

  I am using 10.10 with STA drivers, I reinstalled ubuntu because the b43 drivers were giving me a huge hassle along with some weird kernel issues. My wireless speed is fine, everything works well, except upon restart of computer and after taking the computer out of suspend. It takes about 30-45 seconds for the wireless to reconnect, and I think it is a driver issue (I clicked on the network manager at the top and for about 30 seconds there are no wireless networks listed.) I tried this advice already: http://lilserenity.wordpress.com/2007/10/31/fix-ubuntu-dropping-wireless-on-suspendhibernate-resume/ which basically says to change this: STOP_SERVICES="" to STOP_SERVICES="networking" in the file /etc/default/acpi-support This did not help anything. Something to note is that the issue does not occur when I am logging back in after already logging in once and logging out.

  Read the article

• Can I input Chinese character in Unity's dash?

  - by Meteor

  I use Ubuntu in Chinese language. And a lot of programme on my Ubuntu have chinese name. I can open it in Terminal. But I can not search them in Unity. Because in Unity's dash, I can only input English, can not use input method. So can not input Chinese character. I use Chinese as my mother language. And I use Chinese input method a lot. Can someone help me to let me input Chinese character in Unity's dash? I really like Ubuntu and want to use it more frequently. Thanks. https://help.ubuntu.com/11.04/ubuntu-help/figures/unity-dash-sample.png

  Read the article

• Installing Age of Empires II using PlayOnLinux doesn't work?

  - by user70342

  I have tried installing age of empires 2 using PlayOnLinux, the installation appeared to go fine but when I try and open the game it says there is a serious fault. The error report is below, unfortunately this doesn't mean alot to me, I was wondering if you could help, a) By highlighting the problem and b) by suggesting a solution. Many Thanks Unhandled exception: page fault on read access to 0xffffffff in 32-bit code (0x0040aaad). Register dump: CS:0073 SS:007b DS:007b ES:007b FS:0033 GS:003b EIP:0040aaad ESP:0033fd00 EBP:0033fde4 EFLAGS:00010293( R- -- I S -A- -C) EAX:00000001 EBX:bde88d9d ECX:00000067 EDX:00400000 ESI:7b867c00 EDI:00400000 Stack dump: 0x0033fd00:00410fed 00000000 00400000 00000067 0x0033fd10:0041ab90 00130d8a 7b895848 7bc483b1 0x0033fd20:0044c800 00000002 0044bdd0 7bca4e6c 0x0033fd30:7bc3590f 00000800 00000094 00000005 0x0033fd40:00000000 00000893 00000002 76726553 0x0033fd50:20656369 6b636150 00003420 00000800 Backtrace: =0 0x0040aaad in empires2 (+0xaaad) (0x0033fde4) 1 0x0041ace2 in empires2 (+0x1ace1) (0x0033fe70) 2 0x7b85ac0c call_process_entry+0xb() in kernel32 (0x0033fe88) 3 0x7b85e13b in kernel32 (+0x4e13a) (0x0033fec8) 4 0x7bc714f0 call_thread_func_wrapper+0xb() in ntdll (0x0033fed8) 5 0x7bc7172d call_thread_func+0x7c() in ntdll (0x0033ffa8) 6 0x7bc714ce RtlRaiseException+0x21() in ntdll (0x0033ffc8) 7 0x7bc4c30e in ntdll (+0x3c30d) (0x0033ffe8) 0x0040aaad: pop %ss Modules: Module Address Debug info Name (51 modules) PE 400000- 44b000 Export empires2 PE 10000000-1000c000 Deferred drvmgt ELF 35cae000-35d24000 Deferred rpcrt4 -PE 35cc0000-35d24000 \ rpcrt4 ELF 68000000-68022000 Deferred ld-linux.so.2 ELF 68022000-681c7000 Deferred libc.so.6 ELF 681c7000-681cc000 Deferred libdl.so.2 ELF 681cc000-681f8000 Deferred libm.so.6 ELF 681f8000-68201000 Deferred libnss_compat.so.2 ELF 68201000-6821b000 Deferred libnsl.so.1 ELF 6821b000-68228000 Deferred libnss_files.so.2 ELF 68228000-68366000 Deferred user32 -PE 68240000-68366000 \ user32 ELF 68366000-68421000 Deferred gdi32 -PE 68370000-68421000 \ gdi32 ELF 68421000-68481000 Deferred advapi32 -PE 68430000-68481000 \ advapi32 ELF 68481000-68499000 Deferred version -PE 68490000-68499000 \ version ELF 68499000-68533000 Deferred libfreetype.so.6 ELF 68533000-68549000 Deferred libz.so.1 ELF 68549000-685db000 Deferred winex11 -PE 68550000-685db000 \ winex11 ELF 685db000-685e4000 Deferred libsm.so.6 ELF 685e4000-685fe000 Deferred libice.so.6 ELF 685fe000-68610000 Deferred libxext.so.6 ELF 68610000-68744000 Deferred libx11.so.6 ELF 68744000-6874a000 Deferred libuuid.so.1 ELF 6874a000-68751000 Deferred libxdmcp.so.6 ELF 68751000-68755000 Deferred libxinerama.so.1 ELF 68755000-6875b000 Deferred libxxf86vm.so.1 ELF 6875b000-68765000 Deferred libxrender.so.1 ELF 68765000-6876e000 Deferred libxrandr.so.2 ELF 6876e000-68772000 Deferred libxcomposite.so.1 ELF 68772000-68782000 Deferred libxi.so.6 ELF 68782000-687b6000 Deferred libfontconfig.so.1 ELF 687b6000-687e0000 Deferred libexpat.so.1 ELF 687e0000-687eb000 Deferred libxcursor.so.1 ELF 687eb000-687f1000 Deferred libxfixes.so.3 ELF 6f102000-6f10e000 Deferred libnss_nis.so.2 ELF 7194d000-7196e000 Deferred imm32 -PE 71950000-7196e000 \ imm32 ELF 72c76000-72db7000 Dwarf libwine.so.1 ELF 75d65000-75d86000 Deferred libxcb.so.1 ELF 79223000-79227000 Deferred libxau.so.6 ELF 7b800000-7b8f5000 Dwarf kernel32 -PE 7b810000-7b8f5000 \ kernel32 ELF 7bc00000-7bcc1000 Dwarf ntdll -PE 7bc10000-7bcc1000 \ ntdll ELF 7bf00000-7bf03000 Deferred ELF 7c708000-7c723000 Deferred libpthread.so.0 Threads: process tid prio (all id:s are in hex) 00000008 (D) C:\Program Files\Microsoft Games\Age of Empires II\empires2.exe 00000009 0 <== 0000000e services.exe 00000039 0 00000038 0 0000001f 0 00000019 0 00000018 0 00000017 0 00000015 0 00000010 0 0000000f 0 00000012 winedevice.exe 0000001e 0 0000001a 0 00000014 0 00000013 0 0000001b plugplay.exe 00000021 0 0000001d 0 0000001c 0 00000024 explorer.exe 00000025 0 00000035 winedevice.exe 0000003a 0 00000037 0 00000036 0 System information: Wine build: wine-1.4-rc1 Platform: i386 Host system: Linux Host version: 3.2.0-24-generic

  Read the article

• ubuntu desktop installation problem, a lot of error messages

  - by veerendar

  Hi I am getting error messages while trying to install ubuntu 12.04 on my desktop(intel pentium D). and the error messages are: *checking battery state... [412.633532] end_request:I/O error .dev sr0, sector 1291684 [435.997503] SQUASHFS error: squashfs_readdata failed to readbloack 0x275fcda4 [435.9975xx] SQUASHFS error: unable to read fragment cache entry page [275fcda4] . . [524.000055] exception Emask 0x0 SAct 0x0SErr 0x0 action 0x6 frozen ata5.00 : cmd a0/00:00:00:08:00/00:00:00/00 tag0 pio 16392 in res 58 /00:02:00:08:00/00/a0 Emask 0xf(timeout) [524.000292] ata5.00 status : {DRDY DRQ} I was able to install on another pc(intel atom) but not on this pc(intel pentium D), Can any one help me in successful installation. Thanks!

  Read the article

• Script to email files content

  - by Tarun

  I have created a shell script that takes backups everyday and emails its execution as successfull or unsuccessfull. Now I want that it send the contents of log file it creates with the mail as well. I have seen how to send file as attachement but I want to send the contents of the file as email message and not the file. Please Help. Its code is like #Email Settings Message_Success="Database Backup generated successfully" Message_Failure="Problem occured while generating Database Backup please verify" Subject="Database Backup Status Mail" Recipients="[email protected]" #Verify Backup Created if [ -f "$Path_Mysql_Dump" ]; then echo "Database Backup Created" >> $Path_Log_File echo "$Message_Success" | mail -s "$Subject" "$Recipients" else echo "Database Backup not created please verify the process will terminate" >> $Path_Log_File echo "$Message_Failure" | mail -s "$Subject" "$Recipients" exit -1 fi

  Read the article

• Bluetooth is always on after waking from hibernate

  - by Ali

  I have a problem that whenever my machine, Lenovo W520, wakes from hibernate the bluetooth starts. It does not matter what the situation was before hibernate. After hibernate the bluetooth is always on. Even in bluetooth settings it says that the bluetooth is off, but I can clearly see that the bluetooth LED is on. I would like to know what the problem is. Is it a hardware problem or software? How can I fix it?

  Read the article

• Ho do I install Ubuntu on my Mac PowerPC G5

  - by Matt

  How do I install Ubuntu on my powerpc G5? which version do I download? where do I download it from? and how do I get it to install? I tried burning ubuntu powerpc 12.04 and booting from the cd and all I get is a DOS like setup prompt "boot:" I've tried 'live' and everything else listed when I push tab; but, every time I get a bunch of white text on black screen, then black text on white and then my monitor just goes black and nothing happens??? what am I doing wrong? any suggestions?

  Read the article

• Ubutu 14.04 triple screen, third screen black and X cursor

  - by Horse

  I am having some issues getting my third screen working properly. I had triple screens working fine on 12.04, using 2 nvidia cards. Did a fresh install of 14.04 and having no end of problems getting it working. It either will just be disabled, or the screen is black with the cursor as an X. I can only enable it from the nvidia server settings tool. The Ubuntu native display settings won't even show the 3rd screen. I tried copying the xorg.conf from my old install, which upon restarting X worked fine on the login screen, but then it just sat there after I logged in and didn’t do anything (mouse was still working). I am using gnome-session-fallback instead of unity if that makes any difference. Still having these issues if I try unity though. How do I get my 3rd screen working and displaying a desktop? Here is my current xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildd@roseapple) Mon Feb 3 15:07:22 UTC 2014 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: unknown, VertRefresh source: unknown Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 0.0 - 0.0 VertRefresh 0.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0" # Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" # Removed Option "SLI" "Off" # Removed Option "BaseMosaic" "off" # Removed Option "metamodes" "GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-2: nvidia-auto-select +0+0, GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-3: nvidia-auto-select +1280+0, GPU-82e96214-175e-5e6a-218c-5bdbc948daf2.DVI-I-1: nvidia-auto-select +3200+0" # Removed Option "SLI" "off" # Removed Option "BaseMosaic" "on" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "nvidia-auto-select +0+0" # Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Here is my old 'working in 12.04' xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 310.19 ([email protected]) Thu Nov 8 02:08:55 PST 2012 Section "ServerLayout" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen2" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: unknown, VertRefresh source: unknown Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "Apple Cinema HD" HorizSync 74.0 - 74.6 VertRefresh 59.9 - 60.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-2: nvidia-auto-select +1280+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0 {viewportout=1280x720+0+152}" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• GUI keyword confusion

  - by richzilla

  Ive been using linux for some time, and ive never quite got my head around the various keywords attached to the GUI. I think i understand the difference between the likes of KDE and Gnome - They are collections of applications and other software that make up a given gui environment. However a quick read through any vaguely technical linux websites will reveal terms like: Murrine Clearlooks GTK Beryl Metacity Window manager Which if im honest, i have no real idea what they mean and how they all relate to each other. Can anybody clarify?

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >