Search Results

Search found 6619 results on 265 pages for 'digital logic'.

Page 198/265 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

  • HTG Explains: Why is Printer Ink So Expensive?

    - by Chris Hoffman
    Printer ink is expensive, more expensive per drop than fine champagne or even human blood. If you haven’t gone paperless, you’ll notice that you’re paying a lot for new ink cartridges — more than seems reasonable. Purchasing the cheapest inkjet printer and buying official ink cartridge replacements is the most expensive thing you can do. There are ways to save money on ink if you must continue to print documents. Cheap Printers, Expensive Ink Ink jet printers are often very cheap. That’s because they’re sold at cost, or even at a loss — the manufacturer either makes no profit from the printer itself or loses money. The manufacturer will make most of its money from the printer cartridges you buy later. Even if the company does make a bit of money from each printer sold, it makes a much larger profit margin on ink. Rather than selling you a printer that may be rather expensive, they want to sell you a cheap printer and make money on an ongoing basis by providing expensive printer ink. It’s been compared to the razor model — sell a razor cheaply and mark up the razor blades. Rather than making a one-time profit on the razor, you’ll make continuing profit as the customer keeps buying razor blade replacements — or ink, in this case. Many printer manufacturers go out of their way to make it difficult for you to use unofficial ink cartridges, building microchips into their official ink cartridges. If you use an unofficial cartridge or refill an official cartridge, the printer may refuse to use it. Lexmark once argued in court that unofficial microchips that enable third-party ink cartridges would violate their copyright and Lexmark has argued that creating an unofficial microchip to bypass this restriction on third-party ink would violate Lexmark’s copyright and be illegal under the US DMCA. Luckily, they lost this argument. What Printer Companies Say Printer companies have put forth their own arguments in the past, attempting to justify the high cost of official ink cartridges and microchips that block any competition. In a Computer World story from 2010, HP argued that they spend a billion dollars each year on “ink research and development.” They point out that printer ink “must be formulated to withstand heating to 300 degrees, vaporization, and being squirted at 30 miles per hour, at a rate of 36,000 drops per second, through a nozzle one third the size of a human hair. After all that it must dry almost instantly on the paper.” They also argue that printers have become more efficient and use less ink to print, while third-party cartridges are less reliable. Companies that use microchips in their ink cartridges argue that only the microchip has the ability to enforce an expiration date, preventing consumers from using old ink cartridges. There’s something to all these arguments, sure — but they don’t seem to justify the sky-high cost of printer ink or the restriction on using third-party or refilled cartridges. Saving Money on Printing Ultimately, the price of something is what people are willing to pay and printer companies have found that most consumers are willing to pay this much for ink cartridge replacements. Try not to fall for it: Don’t buy the cheapest inkjet printer. Consider your needs when buying a printer and do some research. You’ll save more money in the long run. Consider these basic tips to save money on printing: Buy Refilled Cartridges: Refilled cartridges from third parties are generally much cheaper. Printer companies warn us away from these, but they often work very well. Refill Your Own Cartridges: You can get do-it-yourself kits for refilling your own printer ink cartridges, but this can be messy. Your printer may refuse to accept a refilled cartridge if the cartridge contains a microchip. Switch to a Laser Printer: Laser printers use toner, not ink cartridges. If you print a lot of black and white documents, a laser printer can be cheaper. Buy XL Cartridges: If you are buying official printer ink cartridges, spend more money each time. The cheapest ink cartridges won’t contain much ink at all, while larger “XL” ink cartridges will contain much more ink for only a bit more money. It’s often cheaper to buy in bulk. Avoid Printers With Tri-Color Ink Cartridges: If you’re printing color documents, you’ll want to get a printer that uses separate ink cartridges for all its colors. For example, let’s say your printer has a “Color” cartridge that contains blue, green, and red ink. If you print a lot of blue documents and use up all your blue ink, the Color cartridge will refuse to function — now all you can do is throw away your cartridge and buy a new one, even if the green and red ink chambers are full. If you had a printer with separate color cartridges, you’d just have to replace the blue cartridge. If you’ll be buying official ink cartridges, be sure to compare the cost of cartridges when buying a printer. The cheapest printer may be more expensive in the long run. Of course, you’ll save the most money if you stop printing entirely and go paperless, keeping digital copies of your documents instead of paper ones. Image Credit: Cliva Darra on Flickr     

    Read the article

  • Building InstallShield based Installers using Team Build 2010

    - by jehan
    Last few weeks, I have been working on Application Packaging stuff using all the widely used tools like InstallShield, WISE, WiX and Visual Studio Installer. So, I thought it would be good to post about how to Build the Installers developed using these tools with Team Build 2010. This post will focus on how to build the InstallShield generated packages using Team Build 2010. For the release of VS2010, Microsoft has partnered with Flexera who are the makers of InstallShield to create InstallShield Limited Edition, especially for the customers of Visual Studio. First Microsoft planned to release WiX (Windows Installer Xml) with VS2010, but later Microsoft dropped  WiX from VS2010 due to reasons which are best known to them and partnered with InstallShield for Limited Edition. It disappointed lot of people because InstallShield Limited Edition provides only few features of InstallShield and it may not feasable to build complex installer packages using this and it also requires License, where as WiX is an open source with no license costs and it has proved efficient in building most complex packages. Only the last three features are available in InstallShield Limited Edition from the total features offered by InstallShield as shown in below list.                                                                                            Feature Limited Edition for Visual Studio 2010 Standalone Build System Maintain a clean build machine by using only the part of InstallShield that compiles the installations. InstallShield Best Practices Validation Suite Avoid common installation issues. Try and Die Functionality RCreate a fully functional trial version of your product. InstallShield Repackager Create Windows Installer setups from any legacy installation. Multilingual Support Present installation text in up to 35 languages. Microsoft App-V™ Support Deploy your applications as App-V virtual packages that run without conflict. Industry-Standard InstallScript Achieve maximum flexibility in your installations. Dialog Editor Modify the layout of existing end-user dialogs, create new custom dialogs, and more. Patch Creation Build updates and patches for your products. Setup Prerequisite Editor Easily control prerequisite restart behavior and source locations. String Editor View Control the localizable text strings displayed at run time with this spreadsheet-like table. Text File Changes View Configure search-and-replace actions for content in text files to be modified at run time. Virtual Machine Detection Block your installations from running on virtual machines. Unicode Support Improve multi-language installation development. Support for 64-Bit COM Extraction Extract COM data from a 64-bit COM server. Windows Installer Installation Chaining Add MSI packages to your main installation and chain them together. XML Support Save time by quickly testing XML configuration changes to installation projects. Billboard Support for Custom Branding Display Adobe Flash billboards and other graphic files during the install process. SaaS Support (IIS 7 and SSL Technologies) Easily deploy Windows-based Web applications. Project Assistant Jumpstart a project by using a simplified set of views. Support for Digital Signatures Save time by digitally signing all your files at build time. Easily Run Custom Actions Schedule a custom action to run at precisely the right moment in your installation. Installation Prerequisites Check for and install prerequisites before your installation is executed. To create a InstallShield project in Visual Studio and Build it using Team Build 2010, first you have to add the InstallShield Project template  to your Solution file. If you want to use InstallShield Limited edition you can add it from FileàNewà project àother Project Types àSetup and Deploymentà InstallShield LE and if you are using other versions of InstallShield, then you have to add it from  from FileàNewà project àInstallShield Projects. Here, I’m using  InstallShield 2011 Premier edition as I already have it Installed. I have created a simple package for TailSpin Application which has a Feature called Web, few components and a IIS Web Site for  TailSpin application.   Before started working on this, I thought I may need to build the package by calling invoke process activity in build process template or have to create a new custom activity. But, it got build without any changes to build process template. But, it was failing with below error message. C:\Program Files (x86)\MSBuild\InstallShield\2011\InstallShield.targets (68): The "InstallShield.Tasks.InstallShield" task could not be loaded from the assembly C:\Program Files (x86)\MSBuild\InstallShield\2010Limited\InstallShield.Tasks.dll. Could not load file or assembly 'file:///C:\Program Files(x86)\MSBuild\InstallShield\2011\InstallShield.Tasks.dll' or one of its dependencies. An attempt was made to load a program with an incorrect format. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. This error is due to 64-bit build machine which I’m using. This issue will be replicable if you are queuing a build on a 64-bit build machine. To avoid this you have to ensure that you configured the build definition for your InstallShield project to load the InstallShield.Tasks.dll file (which is a 32-bit file); otherwise, you will encounter this build error informing you that the InstallShield.Tasks.dll file could not be loaded. To select the 32-bit version of MSBuild, click the Process tab of your build definition in Team Explorer. Then, under the Advanced node, find the MSBuild Platform setting, and select x86. Note that if you are using a 32-bit build machine, you can select either Auto or x86 for the MSBuild Platform setting.  Once I did above changes, the build got successful.

    Read the article

  • doubleTwist is an iTunes Alternative that Supports Several Devices

    - by Mysticgeek
    There are a lot of iTunes users out there, but unfortunately you can’t use it with all of your portable devices. Today we take a look at doubleTwist, which allows you to sync your media with a multitude of portable devices and easily share it as well. Note: You can run doubleTwist on Windows or Mac, and here we take a look at the Windows version. Install & Setup doubleTwist Download and install doubleTwist using the defaults in the wizard… Installation takes several moments and you’ll see the progress while it finishes up. After installation is complete, sign up for an account if you don’t already have one. If you do have an account you can login right away. Enter in your username, email address, and password then click Sign Up.   You’ll get an confirmation email and need to activate the account before you can sign in. Once you’re all signed up, launch doubleTwist and you’ll be ready to start using it. doubleTwist Music The default music store is Amazon MP3 store which might appeal to those of you who are tired of the iTunes music store. A lot of times the music is cheaper and available at higher bit rates. You can start searching for music in the Amazon Music Store and previewing songs. To purchase anything though you will need to sign into your Amazon account.   Under Playlists it allows you to import your playlists from iTunes and Windows Media Player, which is a handy feature if you don’t want to set them up again. Of course you can play your songs through the music player on your desktop. Devices One of the coolest things about doubleTwist is that it supports a lot of different portable media devices including iPod, BlackBerry, Windows Mobile, Android, PSP, Smartphones, and much more. Unfortunately for Zune users…there isn’t any support for the Zune of Zune HD yet. Here we have a Creative Zen attached and can sync songs, pictures, and podcasts. An HTC-S620 Smartphone running Windows Mobile… Even a simple USB drive will be recognized and you can transfer your media to it as well.   Podcasts Finding your favorite audio and video podcasts is easy with the search feature. You can easily manage and subscribe to podcasts in the subscriptions section.   You can watch the video podcasts directly in doubleTwist. Sharing Media Also you can share digital media with your friends or add it to Flickr and YouTube. You can send any pictures, videos, or music in your library to other people by dragging it over. You can email users individually… Or access contacts from your Gmail and Yahoo accounts. There is a limit to how much you can send of video podcasts… only the first 10 minutes. The person you send it to will get a link in their email that points to your My Feed page on the doubleTwist site.   There they can access the media you sent…in this example it’s a video podcast but you can share any media. Other Features Under My Profile you can change your avatar and personal information.   In Preferences you can choose where media is stored, its startup actions, podcast subscriptions, and manage device syncing. Conclusion It’s still in beta stage so expect some bugs, but overall doubleTwist is a solid media player that is easy to use with a clean interface. It’s simple and doesn’t try to do too much so is fairly easy on system resources. The main annoyance is it tries to catalog all of your media out of the box. Which may be alright for some users with smaller media collections, but very irritating to advanced users with large collections. Also there is currently no support for the Zune, but according to their forums, it’s on the way. At the time of this writing it’s in public beta and can be downloaded for XP, Vista, Windows 7 (32 & 64 bit), and Mac OSX. If you’re looking for an iTunes alternative that works with several different portable devices, you might want to give DoubleTwist a try. Download DoubleTwist Public Beta See If Your Media Device is Supported by doubleTwist Similar Articles Productive Geek Tips MusicBee is a Fast and Powerful Music ManagerAvoid the Apple QuickTime Bloat with QT LiteBeginner Geek: Set Default Programs in Windows 7 and VistaBeginner Geeks: OpenOffice is a Free Cross Platform Alternative to MS OfficeManage Devices the Easy Way with Device Stage in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

    Read the article

  • Preview and Purchase Ebooks with Kindle for PC

    - by Matthew Guay
    Want to look over a new book, or buy it immediately in ebook format?  Here’s how you can preview and purchase most new books from your PC the easy way. Most new books, including almost all New York Times Bestsellers, are available in ebook format from Amazon’s Kindle store.  The Kindle store also includes numerous free ebooks, including out-of-print classics and a surprising amount of recent books.  With the free Kindle for PC reader, you can read any of these ebooks without having to purchase a Kindle device. Preview Ebooks Before you Purchase Sometimes, it can be hard to know if you want to purchase a new book without reading some of it first.  With Kindle for PC, however, you can download a sample of any ebook available for free.  The sample usually includes the table of contents, forward or introduction, and often part or all of the first chapter. To get an ebook sample, find the book you want in the Kindle store (link below). Now, under the Try it free box, select the correct computer or device to send the sample to, and click Send Sample now. Amazon will thank you for your order, even though this is only a free preview.  Click the Go to Kindle for PC button to open Kindle and read your ebook preview.   Or, if Kindle is already running, press the Refresh button in the top right corner to check for new ebooks and previews. Kindle will synchronize and download the previews you selected. The most recently downloaded items show up on the top left.  All sample books have a red “Sample” bar on the bottom of their cover, and they also include links to Buy or view more info about it on it’s cover.  Double-click your sample to start reading it. Your ebook sample will usually open at the introduction or beginning of the first chapter, but you can also view the index, cover, and more. When you reach the end of the sample book, you can click a link to buy the book or view more details about it.  Strangely, both of these links currently take you to the ebook’s page on Amazon.com, but perhaps in the future the Buy link will directly let you purchase the book. Or, you can also click Buy Now on a sample book directly from your Kindle library. If you clicked one of these links, you will be returned to the ebook’s page on Amazon.  Choose the PC or Kindle you want the book delivered to, and this time, select Buy Now with 1-Click. Add your payment info if you’re not already setup for 1-Click Shopping, and then you’ll be shown the same Thank you page as before.  Refresh Kindle for PC, and your new ebook will automatically download.  Strangely, the sample ebook is not automatically removed, so you can right-click on the sample and select Delete this Book.  Additionally, your last-read page in the sample is not synced to the purchased book, so you may have to find your place again. Now, enjoy your full ebook! Download Free Books for Kindle The Kindle Store has an amazing amount of free ebooks.  Some free books may only be free for a limited time as a promotion, while others, such as old classics, may always be free.  Either which way, once you download it, you can keep it forever. When you find a free ebook you want, select the Kindle or PC you want to download it to and click “Buy now with 1-Click”.  Notice that this book shows it’s price is $0.00, but the button still says Buy now.  Rest assured, if the book’s price show up as $0.00, you will not be charged anything for downloading it. Your ebook will download as usual after your next refresh.  Note that you can still download the sample first if you want, but since the book is free, just download the whole thing and delete it if you don’t want it. Redownload your Purchased or Free Books If you install Kindle on a new PC or delete a book from your library, you can always re-download it from your Amazon account.  Browse to the Manage your Kindle page on Amazon (link below) sign in with your Amazon account, and scroll down to the list of your purchased content. Select the book you wish to download, then choose the Kindle or PC you want to download it to and press Go. Note: There is a “Delete this title” button right below this.  If you press the Delete button, you will not ever be able to re-download it. Or, you can download the book directly from the Archived Items tab in Kindle on your other PC. And, if you have your Kindle content on multiple computers, your reading will be synced via Whispersync.  You can start reading on your desktop, and then resume where you left off from your laptop. Conclusion With these tips and tricks, it is much easier to preview and purchase new books, find and download free ebooks, and re-download any you’ve deleted from your PC.  Have fun filling up your digital library! Links Manage your Kindle account Similar Articles Productive Geek Tips Read Mobi eBooks on Kindle for PCRead Kindle Books On Your Computer with Kindle for PCHow to See Where a TinyUrl Is Really Linking ToEdit Microsoft Word 2007 Documents in Print PreviewWhy Can’t I Turn the Details/Preview Panes On or Off in Windows Vista Explorer? TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go NachoFoto Searches Images in Real-time Office 2010 Product Guides

    Read the article

  • C# Multiple Property Sort

    - by Ben Griswold
    As you can see in the snippet below, sorting is easy with Linq.  Simply provide your OrderBy criteria and you’re done.  If you want a secondary sort field, add a ThenBy expression to the chain.  Want a third level sort?  Just add ThenBy along with another sort expression. var projects = new List<Project>     {         new Project {Description = "A", ProjectStatusTypeId = 1},         new Project {Description = "B", ProjectStatusTypeId = 3},         new Project {Description = "C", ProjectStatusTypeId = 3},         new Project {Description = "C", ProjectStatusTypeId = 2},         new Project {Description = "E", ProjectStatusTypeId = 1},         new Project {Description = "A", ProjectStatusTypeId = 2},         new Project {Description = "C", ProjectStatusTypeId = 4},         new Project {Description = "A", ProjectStatusTypeId = 3}     };   projects = projects     .OrderBy(x => x.Description)     .ThenBy(x => x.ProjectStatusTypeId)     .ToList();   foreach (var project in projects) {     Console.Out.WriteLine("{0} {1}", project.Description,         project.ProjectStatusTypeId); } Linq offers a great sort solution most of the time, but what if you want or need to do it the old fashioned way? projects.Sort ((x, y) =>         Comparer<String>.Default             .Compare(x.Description, y.Description) != 0 ?         Comparer<String>.Default             .Compare(x.Description, y.Description) :         Comparer<Int32>.Default             .Compare(x.ProjectStatusTypeId, y.ProjectStatusTypeId));   foreach (var project in projects) {     Console.Out.WriteLine("{0} {1}", project.Description,         project.ProjectStatusTypeId); } It’s not that bad, right? Just for fun, let add some additional logic to our sort.  Let’s say we wanted our secondary sort to be based on the name associated with the ProjectStatusTypeId.  projects.Sort((x, y) =>        Comparer<String>.Default             .Compare(x.Description, y.Description) != 0 ?        Comparer<String>.Default             .Compare(x.Description, y.Description) :        Comparer<String>.Default             .Compare(GetProjectStatusTypeName(x.ProjectStatusTypeId),                 GetProjectStatusTypeName(y.ProjectStatusTypeId)));   foreach (var project in projects) {     Console.Out.WriteLine("{0} {1}", project.Description,         GetProjectStatusTypeName(project.ProjectStatusTypeId)); } The comparer will now consider the result of the GetProjectStatusTypeName and order the list accordingly.  Of course, you can take this same approach with Linq as well.

    Read the article

  • ASP.NET MVC CRUD Validation

    - by Ricardo Peres
    One thing I didn’t refer on my previous post on ASP.NET MVC CRUD with AJAX was how to retrieve model validation information into the client. We want to send any model validation errors to the client in the JSON object that contains the ProductId, RowVersion and Success properties, specifically, if there are any errors, we will add an extra Errors collection property. Here’s how: 1: [HttpPost] 2: [AjaxOnly] 3: [Authorize] 4: public JsonResult Edit(Product product) 5: { 6: if (this.ModelState.IsValid == true) 7: { 8: using (ProductContext ctx = new ProductContext()) 9: { 10: Boolean success = false; 11:  12: ctx.Entry(product).State = (product.ProductId == 0) ? EntityState.Added : EntityState.Modified; 13:  14: try 15: { 16: success = (ctx.SaveChanges() == 1); 17: } 18: catch (DbUpdateConcurrencyException) 19: { 20: ctx.Entry(product).Reload(); 21: } 22:  23: return (this.Json(new { Success = success, ProductId = product.ProductId, RowVersion = Convert.ToBase64String(product.RowVersion) })); 24: } 25: } 26: else 27: { 28: Dictionary<String, String> errors = new Dictionary<String, String>(); 29:  30: foreach (KeyValuePair<String, ModelState> keyValue in this.ModelState) 31: { 32: String key = keyValue.Key; 33: ModelState modelState = keyValue.Value; 34:  35: foreach (ModelError error in modelState.Errors) 36: { 37: errors[key] = error.ErrorMessage; 38: } 39: } 40:  41: return (this.Json(new { Success = false, ProductId = 0, RowVersion = String.Empty, Errors = errors })); 42: } 43: } As for the view, we need to change slightly the onSuccess JavaScript handler on the Single view: 1: function onSuccess(ctx) 2: { 3: if (typeof (ctx.Success) != 'undefined') 4: { 5: $('input#ProductId').val(ctx.ProductId); 6: $('input#RowVersion').val(ctx.RowVersion); 7:  8: if (ctx.Success == false) 9: { 10: var errors = ''; 11:  12: if (typeof (ctx.Errors) != 'undefined') 13: { 14: for (var key in ctx.Errors) 15: { 16: errors += key + ': ' + ctx.Errors[key] + '\n'; 17: } 18:  19: window.alert('An error occurred while updating the entity: the model contained the following errors.\n\n' + errors); 20: } 21: else 22: { 23: window.alert('An error occurred while updating the entity: it may have been modified by third parties. Please try again.'); 24: } 25: } 26: else 27: { 28: window.alert('Saved successfully'); 29: } 30: } 31: else 32: { 33: if (window.confirm('Not logged in. Login now?') == true) 34: { 35: document.location.href = '<% 1: : FormsAuthentication.LoginUrl %>?ReturnURL=' + document.location.pathname; 36: } 37: } 38: } The logic is as this: If the Edit action method is called for a new entity (the ProductId is 0) and it is valid, the entity is saved, and the JSON results contains a Success flag set to true, a ProductId property with the database-generated primary key and a RowVersion with the server-generated ROWVERSION; If the model is not valid, the JSON result will contain the Success flag set to false and the Errors collection populated with all the model validation errors; If the entity already exists in the database (ProductId not 0) and the model is valid, but the stored ROWVERSION is different that the one on the view, the result will set the Success property to false and will return the current (as loaded from the database) value of the ROWVERSION on the RowVersion property. On a future post I will talk about the possibilities that exist for performing model validation, stay tuned!

    Read the article

  • Dynamically creating meta tags in asp.net mvc

    - by Jalpesh P. Vadgama
    As we all know that Meta tag has very important roles in Search engine optimization and if we want to have out site listed with good ranking on search engines then we have to put meta tags. Before some time I have blogged about dynamically creating meta tags in asp.net 2.0/3.5 sites, in this blog post I am going to explain how we can create a meta tag dynamically very easily. To have meta tag dynamically we have to create a meta tag on server-side. So I have created a method like following. public string HomeMetaTags() { System.Text.StringBuilder strMetaTag = new System.Text.StringBuilder(); strMetaTag.AppendFormat(@"<meta content='{0}' name='Keywords'/>","Home Action Keyword"); strMetaTag.AppendFormat(@"<meta content='{0}' name='Descption'/>", "Home Description Keyword"); return strMetaTag.ToString(); } Here you can see that I have written a method which will return a string with meta tags. Here you can write any logic you can fetch it from the database or you can even fetch it from xml based on key passed. For the demo purpose I have written that hardcoded. So it will create a meta tag string and will return it. Now I am going to store that meta tag in ViewBag just like we have a title tag. In this post I am going to use standard template so we have our title tag there in viewbag message. Same way I am going save meta tag like following in ViewBag. public ActionResult Index() { ViewBag.Message = "Welcome to ASP.NET MVC!"; ViewBag.MetaTag = HomeMetaTags(); return View(); } Here in the above code you can see that I have stored MetaTag ViewBag. Now as I am using standard ASP.NET MVC3 template so we have our we have out head element in Shared folder _layout.cshtml file. So to render meta tag I have modified the Head tag part of _layout.cshtml like following. <head> <title>@ViewBag.Title</title> <link href="@Url.Content("~/Content/Site.css")" rel="stylesheet" type="text/css" /> <script src="@Url.Content("~/Scripts/jquery-1.5.1.min.js")" type="text/javascript"></script> @Html.Raw(ViewBag.MetaTag) </head> Here in the above code you can see I have use @Html.Raw method to embed meta tag in _layout.cshtml page. This HTML.Raw method will embed output to head tag section without encoding html. As we have already taken care of html tag in string function we don’t need the html encoding. Now it’s time to run application in browser. Now once you run your application in browser and click on view source you will find meta tag for home page as following. That’s its It’s very easy to create dynamically meta tag. Hope you liked it.. Stay tuned for more.. Till then happy programming.

    Read the article

  • Reverse subarray of an array with O(1)

    - by Babibu
    I have an idea how to implement sub array reverse with O(1), not including precalculation such as reading the input. I will have many reverse operations, and I can't use the trivial solution of O(N). Edit: To be more clear I want to build data structure behind the array with access layer that knows about reversing requests and inverts the indexing logic as necessary when someone wants to iterate over the array. Edit 2: The data structure will only be used for iterations I been reading this and this and even this questions but they aren't helping. There are 3 cases that need to be taking care of: Regular reverse operation Reverse that including reversed area Intersection between reverse and part of other reversed area in the array Here is my implementation for the first two parts, I will need your help with the last one. This is the rule class: class Rule { public int startingIndex; public int weight; } It is used in my basic data structure City: public class City { Rule rule; private static AtomicInteger _counter = new AtomicInteger(-1); public final int id = _counter.incrementAndGet(); @Override public String toString() { return "" + id; } } This is the main class: public class CitiesList implements Iterable<City>, Iterator<City> { private int position; private int direction = 1; private ArrayList<City> cities; private ArrayDeque<City> citiesQeque = new ArrayDeque<>(); private LinkedList<Rule> rulesQeque = new LinkedList<>(); public void init(ArrayList<City> cities) { this.cities = cities; } public void swap(int index1, int index2){ Rule rule = new Rule(); rule.weight = Math.abs(index2 - index1); cities.get(index1).rule = rule; cities.get(index2 + 1).rule = rule; } @Override public void remove() { throw new IllegalStateException("Not implemented"); } @Override public City next() { City city = cities.get(position); if (citiesQeque.peek() == city){ citiesQeque.pop(); changeDirection(); position += (city.rule.weight + 1) * direction; city = cities.get(position); } if(city.rule != null){ if(city.rule != rulesQeque.peekLast()){ rulesQeque.add(city.rule); position += city.rule.weight * direction; changeDirection(); citiesQeque.push(city); } else{ rulesQeque.removeLast(); position += direction; } } else{ position += direction; } return city; } private void changeDirection() { direction *= -1; } @Override public boolean hasNext() { return position < cities.size(); } @Override public Iterator<City> iterator() { position = 0; return this; } } And here is a sample program: public static void main(String[] args) { ArrayList<City> list = new ArrayList<>(); for(int i = 0 ; i < 20; i++){ list.add(new City()); } CitiesList citiesList = new CitiesList(); citiesList.init(list); for (City city : citiesList) { System.out.print(city + " "); } System.out.println("\n******************"); citiesList.swap(4, 8); for (City city : citiesList) { System.out.print(city + " "); } System.out.println("\n******************"); citiesList.swap(2, 15); for (City city : citiesList) { System.out.print(city + " "); } } How do I handle reverse intersections?

    Read the article

  • Who is Jeremiah Owyang?

    - by Michael Hylton
    Q: What’s your current role and what career path brought you here? J.O.: I'm currently a partner and one of the founding team members at Altimeter Group.  I'm currently the Research Director, as well as wear the hat of Industry Analyst. Prior to joining Altimeter, I was an Industry Analyst at Forrester covering Social Computing, and before that, deployed and managed the social media program at Hitachi Data Systems in Santa Clara.  Around that time, I started a career blog called Web Strategy which focused on how companies were using the web to connect with customers --and never looked back. Q: As an industry analyst, what are you focused on these days? J.O.: There are three trends that I'm focused my research on at this time:  1) The Dynamic Customer Journey:  Individuals (both b2c and b2b) are given so many options in their sources of data, channels to choose from and screens to consume them on that we've found that at each given touchpoint there are 75 potential permutations.  Companies that can map this, then deliver information to individuals when they need it will have a competitive advantage and we want to find out who's doing this.  2) One of the sub themes that supports this trend is Social Performance.  Yesterday's social web was disparate engagement of humans, but the next phase will be data driven, and soon new technologies will emerge to help all those that are consuming, publishing, and engaging on the social web to be more efficient with their time through forms of automation.  As you might expect, this comes with upsides and downsides.  3) The Sentient World is our research theme that looks out the furthest as the world around us (even inanimate objects) become 'self aware' and are able to talk back to us via digital devices and beyond.  Big data, internet of things, mobile devices will all be this next set. Q: People cite that the line between work and life is getting more and more blurred. Do you see your personal life influencing your professional work? J.O.: The lines between our work and personal lives are dissolving, and this leads to a greater upside of being always connected and have deeper relationships with those that are not.  It also means a downside of society expectations that we're always around and available for colleagues, customers, and beyond.  In the future, a balance will be sought as we seek to achieve the goals of family, friends, work, and our own personal desires.  All of this is being ironically written at 430 am on a Sunday am.  Q: How can people keep up with what you’re working on? J.O.: A great question, thanks.  There are a few sources of information to find out, I'll lead with the first which is my blog at web-strategist.com.  A few times a week I'll publish my industry insights (hires, trends, forces, funding, M&A, business needs) as well as on twitter where I'll point to all the news that's fit to print @jowyang.  As my research reports go live (we publish them for all to read --called Open Research-- at no cost) they'll emerge on my blog, or checkout the research tab to find out more now.  http://www.web-strategist.com/blog/research/ Q: Recently, you’ve been working with us here at Oracle on something exciting coming up later this week. What’s on the horizon?  J.O.: Absolutely! This coming Thursday, September 13th, I’m doing a webcast with Oracle on “Managing Social Relationships for the Enterprise”. This is going to be a great discussion with Reggie Bradford, Senior Vice President of Product Development at Oracle and Christian Finn, Senior Director of Product Management for Oracle WebCenter. I’m looking forward to a great discussion around all those issues that so many companies are struggling with these days as they realize how much social media is impacting their business. It’s changing the way your customers and employees interact with your brand. Today it’s no longer a matter of when to become a social-enabled enterprise, but how to become a successful one. Q: You’ve been very actively pursued for media interviews and conference and company speaking engagements – anything you’d like to share to give us a sneak peak of what to expect on Thursday’s webcast?  J.O.: Below is a 15 minute video which encapsulates Altimeter’s themes on the Dynamic Customer Journey and the Sentient World. I’m really proud to have taken an active role in the first ever LeWeb outside of Paris. This one, which was featured in downtown London across the street from Westminster Abbey was sold out. If you’ve not heard of LeWeb, this is a global Internet conference hosted by Loic and Geraldine Le Meur, a power couple that stem from Paris but are also living in Silicon Valley, this is one of my favorite conferences to connect with brands, technology innovators, investors and friends. Altimeter was able to play a minor role in suggesting the theme for the event “Faster Than Real Time” which stems off previous LeWebs that focused on the “Real time web”. In this radical state, companies are able to anticipate the needs of their customers by using data, technology, and devices and deliver meaningful experiences before customers even know they need it. I explore two of three of Altimeter’s research themes, the Dynamic Customer Journey, and the Sentient World in my speech, but due to time, did not focus on Adaptive Organization.

    Read the article

  • MvcExtensions - PerRequestTask

    - by kazimanzurrashid
    In the previous post, we have seen the BootstrapperTask which executes when the application starts and ends, similarly there are times when we need to execute some custom logic when a request starts and ends. Usually, for this kind of scenario we create HttpModule and hook the begin and end request events. There is nothing wrong with this approach, except HttpModules are not at all IoC containers friendly, also defining the HttpModule execution order is bit cumbersome, you either have to modify the machine.config or clear the HttpModules and add it again in web.config. Instead, you can use the PerRequestTask which is very much container friendly as well as supports execution orders. Lets few examples where it can be used. Remove www Subdomain Lets say we want to remove the www subdomain, so that if anybody types http://www.mydomain.com it will automatically redirects to http://mydomain.com. public class RemoveWwwSubdomain : PerRequestTask { public RemoveWww() { Order = DefaultOrder - 1; } protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { const string Prefix = "http://www."; Check.Argument.IsNotNull(executionContext, "executionContext"); HttpContextBase httpContext = executionContext.HttpContext; string url = httpContext.Request.Url.ToString(); bool startsWith3W = url.StartsWith(Prefix, StringComparison.OrdinalIgnoreCase); bool shouldContinue = true; if (startsWith3W) { string newUrl = "http://" + url.Substring(Prefix.Length); HttpResponseBase response = httpContext.Response; response.StatusCode = (int)HttpStatusCode.MovedPermanently; response.Status = "301 Moved Permanently"; response.RedirectLocation = newUrl; response.SuppressContent = true; shouldContinue = false; } return shouldContinue ? TaskContinuation.Continue : TaskContinuation.Break; } } As you can see, first, we are setting the order so that we do not have to execute the remaining tasks of the chain when we are redirecting, next in the ExecuteCore, we checking the whether www is present, if present we are sending a permanently moved http status code and breaking the task execution chain otherwise we are continuing with the chain. Blocking IP Address Lets take another scenario, your application is hosted in a shared hosting environment where you do not have the permission to change the IIS setting and you want to block certain IP addresses from visiting your application. Lets say, you maintain a list of IP address in database/xml files which you want to block, you have a IBannedIPAddressRepository service which is used to match banned IP Address. public class BlockRestrictedIPAddress : PerRequestTask { protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { bool shouldContinue = true; HttpContextBase httpContext = executionContext.HttpContext; if (!httpContext.Request.IsLocal) { string ipAddress = httpContext.Request.UserHostAddress; HttpResponseBase httpResponse = httpContext.Response; if (executionContext.ServiceLocator.GetInstance<IBannedIPAddressRepository>().IsMatching(ipAddress)) { httpResponse.StatusCode = (int)HttpStatusCode.Forbidden; httpResponse.StatusDescription = "IPAddress blocked."; shouldContinue = false; } } return shouldContinue ? TaskContinuation.Continue : TaskContinuation.Break; } } Managing Database Session Now, let see how it can be used to manage NHibernate session, assuming that ISessionFactory of NHibernate is already registered in our container. public class ManageNHibernateSession : PerRequestTask { private ISession session; protected override TaskContinuation ExecuteCore(PerRequestExecutionContext executionContext) { ISessionFactory factory = executionContext.ServiceLocator.GetInstance<ISessionFactory>(); session = factory.OpenSession(); return TaskContinuation.Continue; } protected override void DisposeCore() { session.Close(); session.Dispose(); } } As you can see PerRequestTask can be used to execute small and precise tasks in the begin/end request, certainly if you want to execute other than begin/end request there is no other alternate of HttpModule. That’s it for today, in the next post, we will discuss about the Action Filters, so stay tuned.

    Read the article

  • XNA Notes 005

    - by George Clingerman
    Another week and another crazy amount of activity going on in the XNA community. I’m fairly certain I missed over half of it. In fact, if I am missing things, make sure to email me and I’ll try and make sure I catch it next week! ([email protected]). Also, if you’ve got any advice, things you like/don’t like about the way these XNA Notes are going let me know. I always appreciate feedback (currently spammers are leaving me the nicest comments so you guys have work to do!) Without further ado, here’s this week’s notes! Time Critical XNA News The XNA Team Blob reminds us that February 7th is the last day to submit XNA 3.1 games to peer review! http://blogs.msdn.com/b/xna/archive/2011/01/31/7-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx XNA MVPS Chris Williams kicks off the marketing campaign for our book http://geekswithblogs.net/cwilliams/archive/2011/01/28/143680.aspx Catalin Zima posts the comparison cheat sheet for why Angry Birds is different than Chickens Can’t Fly http://www.amusedsloth.com/2011/02/comparison-cheat-sheet-for-chickens-cant-fly-and-angry-birds/ Jim Perry congratulates the developers selected by Game Developer Magazine for Best Xbox LIVE Indie Games of 2010 http://machxgames.com/blog/?p=24 @NemoKrad posts his XNAKUUG talks for all to enjoy http://twitter.com/NemoKrad/statuses/33142362502864896 http://xna-uk.net/blogs/randomchaos/archive/2011/02/03/xblig-uk-2011-january-amp-february-talk.aspx George  (that’s me!) preps for his XNA talk coming up on the 8th http://twitter.com/clingermangw/statuses/32669550554124288 http://www.portlandsilverlight.net/Meetings/Details/15 XNA Developers FireFly posts the last tutorial in his XNA Tower Defense tutorial series http://forums.create.msdn.com/forums/p/26442/451460.aspx#451460 http://xnatd.blogspot.com/2011/01/tutorial-14-polishing-game.html @fredericmy posts the main difference when porting a game from Windows Phone 7 to Xbox 360 http://fairyengine.blogspot.com/2011/01/main-differences-when-porting-game-from.html @ElementCy creates a pretty rad video of a MineCraft type terrain created using XNA http://www.youtube.com/watch?v=Waw1f7wnl9I Andrew Russel gets the first XNA badge on gamedev.stackexchange http://twitter.com/_AndrewRussell/statuses/32322877004972032 http://gamedev.stackexchange.com/badges?tab=tags And his funding for ExEn has passed $7000 only $3000 to go http://twitter.com/_AndrewRussell/statuses/33042412804771840 Subodh Pushpak blogs about his Windows Phone 7 XNA talk http://geekswithblogs.net/subodhnpushpak/archive/2011/02/01/windows-phone-7-silverlight--xna-development-talk.aspx Slyprid releases the latest version of Transmute and needs more people to test http://twitter.com/slyprid/statuses/32452488418299904 http://forgottenstarstudios.com/ SpynDoctorGames celebrates the 1 year anniversary of Your Doodles Are Bugged! Congrats! http://twitter.com/SpynDoctorGames/statuses/32511689068908544 Noogy (creator of Dust the Elysian Tail) prepares his conversion to XNA 4.0 http://twitter.com/NoogyTweet/statuses/32522008449253376 @philippedasilva posts about the Indiefreaks Game Framework v0.2.0.0 Input management system http://twitter.com/philippedasilva/statuses/32763393957957632 http://indiefreaks.com/2011/02/02/behind-smart-input-system-feature/ Mommy’s Best Games debates what to do about High Scores with their new update http://mommysbest.blogspot.com/2011/02/high-score-shake-up.html @BinaryTweedDeej want to know if there’s anything the community needs to make XNA games for the PC. Give him some feedback! http://twitter.com/BinaryTweedDeej/status/32895453863354368 @mikebmcl promises to write us all a book (I can’t wait to read it!) http://twitter.com/mikebmcl/statuses/33206499102687233 @werezompire is going to live, LIVE, thanks to all the generosity and support from the community! http://twitter.com/werezompire/statuses/32840147644977153 Xbox LIVE Indie Games (XBLIG) Making money in Xbox 360 indie game development. Is it possible? http://www.bitmob.com/articles/making-money-in-xbox-360-indie-game-development-is-it-possible @AlejandroDaJ posts some thoughts abut the bitmob article http://twitter.com/AlejandroDaJ/statuses/31068552165330944 http://www.apathyworks.com/blog/view.php?id=00215 Kobun gets my respect as an XBLIG champion. I’m not sure who Kobun is, but if you’ve every read through the comment sections any time Kotaku writes about XBLIGs you’ll see a lot of confusion, disinformation in there. Kobun has been waging a secret war battling that lack of knowledge and he does it well. Also he’s running a pretty kick ass site for Xbox LIVE Indie Game reviews http://xboxindies.teamkobun.com/ @radiangames releases his last Xbox LIVE Indie Game...for now http://bit.ly/gMK6lE Playing Avaglide with the Kinect controller http://www.youtube.com/watch?v=UqAYbHww53o http://www.joystiq.com/2011/01/30/kinect-hacks-take-to-the-skies-with-avaglide/ Luke Schneider of Radiangames interviewed in Edge magazine http://www.next-gen.biz/features/radiangames-venture Digital Quarters posts thoughts on why XBLIG’s online requirement kills certain genres http://digitalquarters.blogspot.com/2011/02/thoughts-why-xbligs-online-requirement.html Mommy’s Best Games shares the news that several XBLIGs were featured in the March 2011 issue of Famitsu 360 http://forums.create.msdn.com/forums/p/33455/451487.aspx#451487 NaviFairy continues with his Indie-Game-A-Day http://gaygamer.net/2011/02/indie_game_a_day_epic_dungeon.html http://gaygamer.net/2011/02/indie_game_a_day_break_limit_r.html and more every day...that’s kind of the point! Keep your eye on this series! VVGTV continues with it’s awesome reviews/promotions for XBLIGs http://vvgtv.com/ http://vvgtv.com/2011/02/03/iredia-atrams-secret-xblig-review-2/ http://vvgtv.com/2011/02/02/poopocalypse-coming-soon-to-xblig/ ….and even more, you get the point. Magicka is an Indie Game doing really well on Steam AND it’s made using XNA http://www.magickagame.com/ http://twitter.com/Magickagame/statuses/32712762580799488 GameMarx reviews Antipole http://www.gamemarx.com/reviews/73/antipole-is-vvvvvvery-good.aspx Armless Octopus review Alpha Squad http://www.armlessoctopus.com/2011/01/28/xbox-indie-review-alpha-squad/ An interesting article about Kodu that Jim Perry found http://twitter.com/MachXGames/statuses/32848044105924608 http://www.develop-online.net/news/36915/10-year-old-Jordan-makes-games-The-UK-needs-more-like-her XNA Game Development Sgt. Conker posts about the Natur beta, a new book and whether you can make money with XBLIG http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/a-new-book-on-the-block-and-a-new-natur-beta/ http://www.sgtconker.com/2011/01/making-money-in-xbox-360-indie-game-development-is-it-possible/ Tips for setting up SVN http://bit.ly/fKxgFh @bsimser found tons of royalty free music and soundfx for your XNA Games http://twitter.com/bsimser/statuses/31426632933711872 Post on the new features in the next Sunburn Editor http://www.synapsegaming.com/blogs/fivesidedbarrel/archive/2011/01/28/new-editor-features-prefabs-components-and-more.aspx @jasons_novaleaf posts source code for light pre-pass optimizations for #xna http://twitter.com/jasons_novaleaf/statuses/33348855403642880 http://jcoluna.wordpress.com/2011/02/01/xna-4-0-light-pre-pass-optimization-round-one/ I’ve been learning about doing an A.I. for turn based games and this article was a great resource. http://www.gamasutra.com/view/feature/1535/designing_ai_algorithms_for_.php?print=1

    Read the article

  • LINQ and ordering of the result set

    - by vik20000in
    After filtering and retrieving the records most of the time (if not always) we have to sort the record in certain order. The sort order is very important for displaying records or major calculations. In LINQ for sorting data the order keyword is used. With the help of the order keyword we can decide on the ordering of the result set that is retrieved after the query.  Below is an simple example of the order keyword in LINQ.     string[] words = { "cherry", "apple", "blueberry" };     var sortedWords =         from word in words         orderby word         select word; Here we are ordering the data retrieved based on the string ordering. If required the order can also be made on any of the property of the individual like the length of the string.     var sortedWords =         from word in words         orderby word.Length         select word; You can also make the order descending or ascending by adding the keyword after the parameter.     var sortedWords =         from word in words         orderby word descending         select word; But the best part of the order clause is that instead of just passing a field you can also pass the order clause an instance of any class that implements IComparer interface. The IComparer interface holds a method Compare that Has to be implemented. In that method we can write any logic whatsoever for the comparision. In the below example we are making a string comparison by ignoring the case. string[] words = { "aPPLE", "AbAcUs", "bRaNcH", "BlUeBeRrY", "cHeRry"}; var sortedWords = words.OrderBy(a => a, new CaseInsensitiveComparer());  public class CaseInsensitiveComparer : IComparer<string> {     public int Compare(string x, string y)     {         return string.Compare(x, y, StringComparison.OrdinalIgnoreCase);     } }  But while sorting the data many a times we want to provide more than one sort so that data is sorted based on more than one condition. This can be achieved by proving the next order followed by a comma.     var sortedWords =         from word in words         orderby word , word.length         select word; We can also use the reverse() method to reverse the full order of the result set.     var sortedWords =         from word in words         select word.Reverse();                                 Vikram

    Read the article

  • Slow wifi on Ubuntu 12.04 wifi driver ath9k

    - by lunar
    For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Silverlight Cream for May 08, 2010 -- #858

    - by Dave Campbell
    In this Issue: Phil Middlemiss, Jaime Rodriguez, Senthil Kumar, Mike Snow, DaveDev, Gergely Orosz, Kirupa, Cheryl Simmons, András Velvárt, Dan Wahlin, Michael D. Brown, and Ben Rush. Shoutouts: Erik Mork and crew have their latest up: This Week In Silverlight – Where’s the Tablet? Chris Rouw has a good link post and instructions on WCF RIA services: Deploying and Configuring Silverlight 4 and WCF RIA Services From SilverlightCream.com: Quick and Easy Sscalable Rounded Bevels Phil Middlemiss duplicates some bevel-edged rectangles in Blend, and they look great. Now you don't have to import all the other PhotoShop bits to get those things looking the way you want! A transparent Windows PHONE FAQ Jaime Rodriguez combined a bunch of information into a WP7 FAQ that he's going to keep up to date, so bookmark the page. He also has links to the Training Kit, on and offline versions. Windows Phone Developer Training Kit April Refresh is now available for Download Thanks to Senthil Kumar, I found out there is an April refresh of the WP7 Training kit at Channel 9 -- go get yours now --- I'll still be here when you get back! Silverlight Tip of the Day #16 – Working with IgnoreImageCache Mike Snow's Tip of the day #16 covers IgnoreImageCache and like many other things in life, until you read Mike's post you may be surprised at how it works. DoodlePad – A fun, free, sketching application for Windows Phone 7 DaveDev has a new WP7 App up that lets you or your kids 'Doodle' on the phone... could be a note, or could be a drawing... good post with all the links you need to get this cranked up on the emulator. Printing in Silverlight: Printing Charts and Auto Scaling Gergely Orosz's latest post is a very useful one on auto-scaling charts to fit a printed page and then getting them to print. Smoothly Scrolling a ListBox Check out the smooth scrolling Kirupa has on the ListBox near the top of his post... all good stuff... you wanna know how to do that! Plus... it's dead simple and all in Blend :) http://www.sparklingclient.com/wheres-the-silverlight-tablet/ Cheryl Simmons has a great tip up at the SilverlightSDK if you haven't burned through to figure it out yet ... changing the watermark on a DatePicker control... looks great! The story of a wicked bug András Velvárt tells a story of a bug that just defied logic or being found. Read how he tracked it down and what it actually was... could save you some time. Story learned: if I have a problem that bad, I'm calling András :) Text Trimming in Silverlight 4 Dan Wahlin gives a quick run-through of what TextBox trimming is, and then by a good real example... check it out and start using it in your projects. Enterprise Patterns with WCF RIA Services Michael D. Brown has an article in MSDN Magazine on RIA Services. Great information and link-packed article, with all the source avialable for download. Building Custom Players with the Silverlight Media Framework Ben Rush has a nice long tutorial on the Silverlight Media Framework up on the MSDN Magazine site ... lots of information in there. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Review: A Quick Look at Reflector

    - by James Michael Hare
    I, like many, was disappointed when I heard that Reflector 7 was not free, and perhaps that’s why I waited so long to try it and just kept using my version 6 (which continues to be free).  But though I resisted for so long, I longed for the better features that were being developed, and began to wonder if I should upgrade.  Thus, I began to look into the features being offered in Reflector 7.5 to see what was new. Multiple Editions Reflector 7.5 comes in three flavors, each building on the features of the previous version: Standard – Contains just the Standalone application ($70) VS – Same as Standard but adds Reflector Object Browser for Visual Studio ($130) VSPro – Same as VS but adds ability to set breakpoints and step into decompiled code ($190) So let’s examine each of these features. The Standalone Application (Standard, VS, VSPro editions) Popping open Reflector 7.5 and looking at the GUI, we see much of the same familiar features, with a few new ones as well: Most notably, the disassembler window now has a tabbed window with navigation buttons.  This makes it much easier to back out of a deep-dive into many layers of decompiled code back to a previous point. Also, there is now an analyzer which can be used to determine dependencies for a given method, property, type, etc. For example, if we select System.Net.Sockets.TcpClient and hit the Analyze button, we’d see a window with the following nodes we could expand: This gives us the ability to see what a given type uses, what uses it, who exposes it, and who instantiates it. Now obviously, for low-level types (like DateTime) this list would be enormous, but this can give a lot of information on how a given type is connected to the larger code ecosystem. One of the other things I like about using Reflector 7.5 is that it does a much better job of displaying iterator blocks than Reflector 6 did. For example, if you were to take a look at the Enumerable.Cast() extension method in System.Linq, and dive into the CastIterator in Reflector 6, you’d see this: But now, in Reflector 7.5, we see the iterator logic much more clearly: This is a big improvement in the quality of their code disassembler and for me was one of the main reasons I decided to take the plunge and get version 7.5. The Reflector Object Browser (VS, VSPro editions) If you have the .NET Reflector VS or VSPro editions, you’ll find you have in Visual Studio a Reflector Object Browser window available where you can select and decompile any assembly right in Visual Studio. For example, if you want to take a peek at how System.Collections.Generic.List<T> works, you can either select List<T> in the Reflector Object Browser, or even simpler just select a usage of it in your code and CTRL + Click to dive in. – And it takes you right to a source window with the decompiled source: Setting Breakpoints and Stepping Into Decompiled Code (VSPro) If you have the VSPro edition, in addition to all the things said above, you also get the additional ability to set breakpoints in this decompiled code and step through it as if it were your own code: This can be a handy feature when you need to see why your code’s use of a BCL or other third-party library isn’t working as you expect. Summary Yes, Reflector is no longer free, and yes, that’s a bit of a bummer. But it always was and still is a very fine tool. If you still have Reflector 6, you aren’t forced to upgrade any longer, but getting the nicer disassembler (especially for iterator blocks) and the handy VS integration is worth at least considering upgrading for.  So I leave it up to you, these are some of the features of Reflector 7.5, what’s your thoughts? Technorati Tags: .NET,Reflector

    Read the article

  • Profit's COLLABORATE 10 Session Selections

    - by Aaron Lazenby
    COLLABORATE 2010 is a mere 11 days away (thanks for the reminder @ocp_advisor). Every year I publish my a list of the sessions I think reflect some of the more interesting people/trends in enterprise IT. I should be at all of these sessions, so drop by for a chat--I'll be the guy tapping out emails on my iPad... Monday, April 19 9:15 a.m. - Keynote: Transforming Customer Value, Delivering Highest Customer Service Location: Keynote Hall I never miss Charles Phillips when he speaks--it's one of the best opportunities to get an update on Oracle product developments and strategy. And there's certainly occasion for an update: this will be Phillips' first big presentation since the Oracle + Sun Strategy Update in late January. Phillips is appearing with Oracle Executive Vice President of Development Thomas Kurian which means there should be some excellent information about how customers are using Oracle's complete software and hardware stack to address enterprise IT challenges. The session should provide some excellent context for the rest of the week's session...don't miss it. 10:45 a.m. - Oracle Fusion Applications: Functional Overview Location: South Seas FI met Basheer Khan at COLLABORATE 08 in Denver and have followed his work ever since. He's a former member of the OAUG Board of Directors, an Oracle ACE, and a charismatic enterprise IT expert. Having worked with the Oracle Usability Advisory Board, Basheer should have some fascinating insights to share about the features and interface of Oracle's Fusine Applications. This session, along with Nadia Bendjedou's "10 Things You Can Do Today to Prepare for the Next Generation Applications" (on Tuesday, April 20 8:00 a.m. in room 3662) should give attendees the update they need about Oracle's next-generation applications.   1:15p.m. - E-Business Suite in the Amazon Cloud Location: South Seas HI did my first full-fledged cloud computing coverage at last year's COLLABORATE show (check out my interview with Oracle's Bill Hodak), where I first learned about Amazon's EC2 offering. I've since talked with several people who have provisioned server space on Amazon's cloud with great results. So I'm looking forward to watching the audience configure an instance of the Oracle E-Business Suite release 12 on the cloud while Chuck Edwards from Blue Gecko drives. This session should take some of the mist and vapor out of the cloud conversation.2:30 p.m. - "Zero Sign-on" to EBS - Enabling 96000 Users to Login to EBS Without User Maintenance Location: South Seas HI'll be sitting tight in South Seas H for the next session on Monday where Doug Pepka, a ten-year veteran of communications giant Comcast, will be walking attendees through a massive single sign-on (SSO) project across the enterprise. I'm working on a story about SSO for the August issue of Profit, so this session has real practical value to me. Plus the proliferation of user account logins--both personal and professional--makes this a critical usability/change management issue for IT leaders planning for successful long-term IT implementations.   Tuesday 8:00 am  - Information Architecture for Men in Kilts Location: SURF AGetting to a 8:00 a.m. presentation is a tall order in Las Vegas, but presenter Billy Cripe will make it worth your effort. Not only is the title of this session great, but the content should appeal to any IT strategist looking to push the limits of Web 2.0 technologies in the enterprise. Cripe is a product management director of Enterprise 2.0 and Enterprise Content Management at Oracle, author of Reshaping Your Business with Web 2.0, and a prolific blogger--he knows how information architecture is critical to and enterprise 2.0 implementation.    10:30a.m. - Oracle Virtualization: From Desktop to Data Center Location: REEF FData center virtualization is still one of the best ways to reduce the cost of running enterprise IT. With the addition of Sun products, Oracle has the industry's most comprehensive virtualization portfolio. I must admit, I'm no expert in this subject. So I'm looking forward to Monica Kumar's presentation so I can get up to speed.   Wednesday 8:00 a.m. - The Art of the Steal Location: Mandalay Bay Ballroom JMany will know Frank Abagnale from Steven Spielberg's 2002 film "Catch Me if You Can." The one-time con man and international fugitive who swindled $2.5 million in forged checks went on to help U.S. federal officials investigate fraud cases. Now the CEO of Abagnale and Associates, he has become an invaluable source to the business world on the subject of fraud and fraud protection. With identity theft and digital fraud still on the rise, this session should be an entertaining, and sobering, education on the threats facing businesses and customers around the world. A great way to start Wednesday.1:00 p.m. - Google Wave: Will it replace e-mail as we know it today? Location: SURF EBy many assessments (my own included), Google Wave is a bit of an open collaboration failure. It may seem like an odd reason for me to be excited about this session, but I'm looking forward to the chance to revisit the technology. Also, this is a great case study in connecting free, available Internet tools to existing enterprise computing environments--an issue that IT strategists must contend with as workers spreads out and choose their own productivity tools.  

    Read the article

  • Windows Azure Use Case: New Development

    - by BuckWoody
    This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

    Read the article

  • Employee Info Starter Kit: Project Mission

    - by Mohammad Ashraful Alam
    Employee Info Starter Kit is an open source ASP.NET project template that is intended to address different types of real world challenges faced by web application developers when performing common CRUD operations. Using a single database table ‘Employee’, it illustrates how to utilize Microsoft ASP.NET 4.0, Entity Framework 4.0 and Visual Studio 2010 effectively in that context. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule. where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. User Stories The user end functionalities of this starter kit are pretty simple and straight forward that are focused in to perform CRUD operation on employee records as described below. Creating a new employee record Read existing employee record Update an existing employee record Delete existing employee records Key Technology Areas ASP.NET 4.0 Entity Framework 4.0 T-4 Template Visual Studio 2010 Architectural Objective There is no universal architecture which can be considered as the best for all sorts of applications around the world. Based on requirements, constraints, environment, application architecture can differ from one to another. Trade-off factors are one of the important considerations while deciding a particular architectural solution. Employee Info Starter Kit is highly influenced by the concept ‘Pareto Principle’ or 80-20 rule, where it is targeted to enable a web developer to gain 80% productivity with 20% of effort with respect to learning curve and production. “Productivity” as the architectural objective typically also includes other trade-off factors as well as, such as testability, flexibility, performance etc. Fortunately Microsoft .NET Framework 4.0 and Visual Studio 2010 includes lots of great features that have been implemented cleverly in this project to reduce these trade-off factors in the minimum level. Why Employee Info Starter Kit is Not a Framework? Application frameworks are really great for productivity, some of which are really unavoidable in this modern age. However relying too many frameworks may overkill a project, as frameworks are typically designed to serve wide range of different usage and are less customizable or editable. On the other hand having implementation patterns can be useful for developers, as it enables them to adjust application on demand. Employee Info Starter Kit provides hundreds of “connected” snippets and implementation patterns to demonstrate problem solutions in actual production environment. It also includes Visual Studio T-4 templates that generate thousands lines of data access and business logic layer repetitive codes in literally few seconds on the fly, which are fully mock testable due to language support for partial methods and latest support for mock testing in Entity Framework. Why Employee Info Starter Kit is Different than Other Open-source Web Applications? Software development is one of the rapid growing industries around the globe, where the technology is being updated very frequently to adapt greater challenges over time. There are literally thousands of community web sites, blogs and forums that are dedicated to provide support to adapt new technologies. While some are really great to enable learning new technologies quickly, in most cases they are either too “simple and brief” to be used in real world scenarios or too “complex and detailed” which are typically focused to achieve a product goal (such as CMS, e-Commerce etc) from "end user" perspective and have a long duration learning curve with respect to the corresponding technology. Employee Info Starter Kit, as a web project, is basically "developer" oriented which actually considers a hybrid approach as “simple and detailed”, where a simple domain has been considered to intentionally illustrate most of the architectural and implementation challenges faced by web application developers so that anyone can dive into deep into the corresponding new technology or concept quickly. Roadmap Since its first release by 2008 in MSDN Code Gallery, Employee Info Starter Kit gained a huge popularity in ASP.NET community and had 1, 50,000+ downloads afterwards. Being encouraged with this great response, we have a strong commitment for the community to provide support for it with respect to latest technologies continuously. Currently hosted in Codeplex, this community driven project is planned to have a wide range of individual editions, each of which will be focused on a selected application architecture, framework or platform, such as ASP.NET Webform, ASP.NET Dynamic Data, ASP.NET MVC, jQuery Ajax (RIA), Silverlight (RIA), Azure Service Platform (Cloud), Visual Studio Automated Test etc. See here for full list of current and future editions.

    Read the article

  • Why is my external USB hard drive sometimes completely inaccessible?

    - by Eliah Kagan
    I have an external USB hard drive, consisting of an 1 TB SATA drive in a Rosewill RX35-AT-SU SLV Aluminum 3.5" Silver USB 2.0 External Enclosure, plugged into my SONY VAIO VGN-NS310F laptop. It is plugged directly into the computer (not through a hub). The drive inside the enclosure is a 7200 rpm Western Digital, but I don't remember the exact model. I can remove the drive from the enclosure (again), if people think it's necessary to know that detail. The drive is formatted ext4. I mount it dynamically with udisks on my Lubuntu 11.10 system, usually automatically via PCManFM. (I have had Lubuntu 12.04 on this machine, and experienced all this same behavior with that too.) Every once in a while--once or twice a day--it becomes inaccessible, and difficult to unmount. Attempting to unmount it with sudo umount ... gives an error message saying the drive is in use and suggesting fuser and lsof to find out what is using it. Killing processes found to be using the drive with fuser and lsof is sometimes sufficient to let me unmount it, but usually isn't. Once the drive is unmounted or the machine is rebooted, the drive will not mount. Plugging in the drive and turning it on registers nothing on the computer. dmesg is unchanged. The drive's access light usually blinks vigorously, as though the drive is being accessed constantly. Then eventually, after I keep the drive off for a while (half an hour), I am able to mount it again. While the drive doesn't work on this machine for a while, it will work immediately on another machine running the same version of Ubuntu. Sometimes bringing it back over from the other machine seems to "fix" it. Sometimes it doesn't. The drive doesn't always stop being accessible while mounted, before becoming unmountable. Sometimes it works fine, I turn off the computer, I turn the computer back on, and I cannot mount the drive. Currently this is the only drive with which I have this problem, but I've had problems that I think are the same as this, with different drives, on different Ubuntu machines. This laptop has another external USB drive plugged into it regularly, which doesn't have this problem. Unplugging that drive before plugging in the "problem" drive doesn't fix the problem. I've opened the drive up and made sure the connections were tight in the past, and that didn't seem to help (any more than waiting the same amount of time that it took to open and close the drive, before attempting to remount it). Does anyone have any ideas about what could be causing this, what troubleshooting steps I should perform, and/or how I could fix this problem altogether? Update: I tried replacing the USB data cable (from the enclosure to the laptop), as Merlin suggested. I should've tried that long ago, since it fits the symptoms perfectly (the drive works on another machine, which would make sense because the cable would be bent at a different angle, possibly completing a circuit of frayed wires). Unfortunately, though, this did not help--I have the same problem with the new cable. I'll try to provide additional detailed information about the drive inside the enclosure, next time I'm able to get the drive working. (At the moment I don't have another machine available to attach it.) Major Update (28 June 2012) The drive seems to have deteriorated considerably. I think this is so, because I've attached it to another machine and gotten lots of errors about invalid characters, when copying files from it. I am less interested in recovering data from the drive than I am in figuring out what is wrong with it. I specifically want to figure out if the problem is the drive or the enclosure. Now, when I plug the drive into the original machine where I was having the problems, it still doesn't appear (including with sudo fdisk -l), but it is recognized by the kernel and messages are added to dmesg. Most of the message consist of errors like this, repeated many times: [ 7.707593] sd 5:0:0:0: [sdc] Unhandled sense code [ 7.707599] sd 5:0:0:0: [sdc] Result: hostbyte=invalid driverbyte=DRIVER_SENSE [ 7.707606] sd 5:0:0:0: [sdc] Sense Key : Medium Error [current] [ 7.707614] sd 5:0:0:0: [sdc] Add. Sense: Unrecovered read error [ 7.707621] sd 5:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 7.707636] end_request: critical target error, dev sdc, sector 0 [ 7.707641] Buffer I/O error on device sdc, logical block 0 Here are all the lines from dmesg starting with when the drive is recognized. Please note that: I'm back to running Lubuntu 12.04 on this machine (and perhaps that's a factor in better error messages). Now that the drive has been plugged into another machine and back into this one, and also now that this machine is back to running 12.04, the drive's access light doesn't blink as I had described. Looking at the drive, it would appear as though it is working normally, with low or no access. This behavior (the errors) occurs when rebooting the machine with the drive plugged in, and also when manually plugging in the drive. A few of the messages are about /dev/sdb. That drive is working fine. The bad drive is /dev/sdc. I just didn't want to edit anything out from the middle.

    Read the article

  • Microsoft Silverlight 4 Business Application Development: Beginner's Guide

    Build enterprise-ready business applications with Silverlight An introduction to building enterprise-ready business applications with Silverlight quickly. Get hold of the basic tools and skills needed to get started in Silverlight application development. Integrate different media types, taking the RIA experience further with Silverlight, and much more! Rapidly manage business focused controls, data, and business logic connectivity. A suite of business applications will be built over the course of the book and all examples will be geared around real-world useful application developments, enabling .NET developers to focus on getting started in business application development using Silverlight. In Detail Microsoft Silverlight is a programmable web browser plug-in that enables features including animation, vector graphics, and audio-video playback--features that characterize Rich Internet Applications. Silverlight makes possible the development of RIA applications in familiar .NET languages such as C# and VB.NET. Silverlight is a great (and growing) Line of Business platform and is increasingly being used to build business applications. Silverlight 3 made a big step in LOB; Silverlight 4 builds upon this further. This book will enable .NET developers to feel the pulse of business application development with Silverlight quickly. This book is not a general Silverlight 3/4 overview book. It is uniquely aimed at developers who require an introduction to building business applications with Silverlight. This book will focus on building a suite of real-world, useful business applications in a practical hands-on approach. This book is for .Net developers, providing the answers to many questions that are encountered when creating business applications in Silverlight, ultimately enabling rapid development with ease! This book teaches you how to build business applications with Silverlight 3 and 4. Building a suite of applications, it begins by introducing you to the basic tools and skills needed to get started in Silverlight development. It then dives deeply into the world of business application development, covering all the required concepts needed to build sophisticated business applications and provide a rich user experience. Chapters include: building a public website, adding rich media to the website, incorporating RIA into your website, and among others. By following the practical steps in this book, you will learn what's needed to create rich business applications--from the creation of a Silverlight application, to enhancing your application with rich media and connecting your Silverlight application to various Data Sources. What you will learn from this book Learn the basic tools and skills needed to get started in Silverlight 4 business application development. Discover how to enhance your Silverlight business applications with rich data such as sound and video. Know when and how to customize your data in Silverlight using important data controls. Understand how your Silverlight business applications can connect to various Data Sources. Deliver your Silverlight business application in a variety of forms.   Interesting? Read the chapter 1 Getting Started for free!! Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • The Oracle Retail Week Awards - in review

    - by user801960
    The Oracle Retail Week Awards 2012 were another great success, building on the legacy of previous award ceremonies. Over 1,600 of the UK's top retailers gathered at the Grosvenor House Hotel and many of Europe's top retail leaders attended the prestigious Oracle Retail VIP Reception in the Grosvenor House Hotel's Red Bar. Over the years the Oracle Retail Week Awards have become a rallying point for the morale of the retail industry, and each nominated retailer served as a demonstration that the industry is fighting fit. It was an honour to speak to so many figureheads of UK - and global - retail. All of us at Oracle Retail would like to congratulate both the winners and the nominees for the awards. Retail is a cornerstone of the economy and it was inspiring to see so many outstanding demonstrations of innovation and dedication in the entries. Winners 2012   The Market Force Customer Service Initiative of the Year Winner: Dixons Retail: Knowhow Highly Commended: Hughes Electrical: Digital Switchover     The Deloitte Employer of the Year Winner: Morrisons     Growing Retailer of the Year Winner: Hallett Retail - The Concessions People Highly Commended: Blue Inc     The TCC Marketing/Advertising Campaign of the Year Winner: Sainsbury's: Feed your Family for £50     The Brandbank Multichannel Retailer of the Year Winner: Debenhams Highly Commended: Halfords     The Ashton Partnership Product Innovation of the Year Winner: Argos: Chad Valley Highly Commended: Halfords: Private label bikes     The RR Donnelley Pure-play Online Retailer of the Year Winner: Wiggle     The Hitachi Consulting Responsible Retailer of the Year Winner: B&Q: One Planet Home     The CA Technologies Retail Technology Initiative of the Year Winner: Oasis: Argyll Street flagship launch with iPad PoS     The Premier Tax Free Speciality Retailer of the Year Winner: Holland & Barrett     Store Design of the Year Winner: Next Home and Garden, Shoreham, Sussex Highly Commended: Dixons Retail, Black concept store, Birmingham Bullring     Store Manager of the Year Winner: Ian Allcock, Homebase, Aylesford Highly Commended: Darren Parfitt, Boots UK, Melton Mowbray Health Centre     The Wates Retail Destination of the Year Winner: Westfield, Stratford     The AlixPartners Emerging Retail Leader of the Year Winner: Catriona Marshall, HobbyCraft, Chief Executive     The Wipro Retail International Retailer of the Year Winner: Apple     The Clarity Search Retail Leader of the Year Winner: Ian Cheshire, Chief Executive, Kingfisher     The Oracle Retailer of the Year Winner: Burberry     Outstanding Contribution to Retail Winner: Lord Harris of Peckham     Oracle Retail and "Your Experience Platform" Technology is the key to providing that differentiated retail experience. More specifically, it is what we at Oracle call ‘the experience platform’ - a set of integrated, cross-channel business technology solutions, selected and operated by a retail business and IT team, and deployed in accordance with that organisation’s individual strategy and processes. This business systems architecture simultaneously: Connects customer interactions across all channels and touchpoints, and every customer lifecycle phase to provide a differentiated customer experience that meets consumers’ needs and expectations. Delivers actionable insight that enables smarter decisions in planning, forecasting, merchandising, supply chain management, marketing, etc; Optimises operations to align every aspect of the retail business to gain efficiencies and economies, to align KPIs to eliminate strategic conflicts, and at the same time be working in support of customer priorities.   Working in unison, these three goals not only help retailers to successfully navigate the challenges of today but also to focus on delivering that personalised customer experience based on differentiated products, pricing, services and interactions that will help you to gain market share and grow sales.  

    Read the article

  • PASS Summit 2011 &ndash; Part IV

    - by Tara Kizer
    This is the final blog for my PASS Summit 2011 series.  Well okay, a mini-series, I guess. On the last day of the conference, I attended Keith Elmore’ and Boris Baryshnikov’s (both from Microsoft) “Introducing the Microsoft SQL Server Code Named “Denali” Performance Dashboard Reports, Jeremiah Peschka’s (blog|twitter) “Rewrite your T-SQL for Great Good!”, and Kimberly Tripp’s (blog|twitter) “Isolated Disasters in VLDBs”. Keith and Boris talked about the lifecycle of a session, figuring out the running time and the waiting time.  They pointed out the transient nature of the reports.  You could be drilling into it to uncover a problem, but the session may have ended by the time you’ve drilled all of the way down.  Also, the reports are for troubleshooting live problems and not historical ones.  You can use Management Data Warehouse for historical troubleshooting.  The reports provide similar benefits to the Activity Monitor, however Activity Monitor doesn’t provide context sensitive drill through. One thing I learned in Keith’s and Boris’ session was that the buffer cache hit ratio should really never be below 87% due to the read-ahead mechanism in SQL Server.  When a page is read, it will read the entire extent.  So for every page read, you get 7 more read.  If you need any of those 7 extra pages, well they are already in cache.  I had a lot of fun in Jeremiah’s session about refactoring code plus I learned a lot.  His slides were visually presented in a fun way, which just made for a more upbeat presentation.  Jeremiah says that before you start refactoring, you should look at your system.  Investigate missing or too many indexes, out-of-date statistics, and other areas that could be leading to your code running slow.  He talked about code standards.  He suggested using common abbreviations for aliases instead of one-letter aliases.  I’m a big offender of one-letter aliases, but he makes a good point.  He said that join order does not matter to the optimizer, but it does matter to those who have to read your code.  Now let’s get into refactoring! Eliminate useless things – useless/unneeded joins and columns.  If you don’t need it, get rid of it! Instead of using DISTINCT/JOIN, replace with EXISTS Simplify your conditions; use UNION or better yet UNION ALL instead of OR to avoid a scan and use indexes for each union query Branching logic – instead of IF this, IF that, and on and on…use dynamic SQL (sp_executesql, please!) or use a parameterized query in the application Correlated subqueries – YUCK! Replace with a join Eliminate repeated patterns Last, but certainly not least, was Kimberly’s session.  Kimberly is my favorite speaker.  I attended her two-day pre-conference seminar at PASS Summit 2005 as well as a SQL Immersion Event last December.  Did I mention she’s my favorite speaker?  Okay, enough of that. Kimberly’s session was packed with demos.  I had seen some of it in the SQL Immersion Event, but it was very nice to get a refresher on these, especially since I’ve got a VLDB with some growing pains.  One key takeaway from her session is the idea to use a log shipping solution with a load delay, such as 6, 8, or 24 hours behind the primary.  In the case of say an accidentally dropped table in a VLDB, we could retrieve it from the secondary database rather than waiting an eternity for a restore to complete.  Kimberly let us know that in SQL Server 2012 (it finally has a name!), online rebuilds are supported even if there are LOB columns in your table.  This will simplify custom code that intelligently figures out if an online rebuild is possible. There was actually one last time slot for sessions that day, but I had an airplane to catch and my kids to see!

    Read the article

  • SQL SERVER – OVER clause with FIRST _VALUE and LAST_VALUE – Analytic Functions Introduced in SQL Server 2012 – ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING

    - by pinaldave
    Yesterday I had discussed two analytical functions FIRST_VALUE and LAST_VALUE. After reading the blog post I received very interesting question. “Don’t you think there is bug in your first example where FIRST_VALUE is remain same but the LAST_VALUE is changing every line. I think the LAST_VALUE should be the highest value in the windows or set of result.” I find this question very interesting because this is very commonly made mistake. No there is no bug in the code. I think what we need is a bit more explanation. Let me attempt that first. Before you do that I suggest you read yesterday’s blog post as this question is related to that blog post. Now let’s have fun following query: USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO The above query will give us the following result: As per the reader’s question the value of the LAST_VALUE function should be always 114 and not increasing as the rows are increased. Let me re-write the above code once again with bit extra T-SQL Syntax. Please pay special attention to the ROW clause which I have added in the above syntax. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Now once again check the result of the above query. The result of both the query is same because in OVER clause the default ROWS selection is always UNBOUNDED PRECEDING AND CURRENT ROW. If you want the maximum value of the windows with OVER clause you need to change the syntax to UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING for ROW clause. Now run following query and pay special attention to ROW clause again. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Here is the resultset of the above query which is what questioner was asking. So in simple word, there is no bug but there is additional syntax needed to add to get your desired answer. The same logic also applies to PARTITION BY clause when used. Here is quick example of how we can further partition the query by SalesOrderDetailID with this new functions. USE AdventureWorks GO SELECT s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty, FIRST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) FstValue, LAST_VALUE(SalesOrderDetailID) OVER (PARTITION BY SalesOrderID ORDER BY SalesOrderDetailID ROWS BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING) LstValue FROM Sales.SalesOrderDetail s WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY s.SalesOrderID,s.SalesOrderDetailID,s.OrderQty GO Above query will give us windowed resultset on SalesOrderDetailsID as well give us FIRST and LAST value for the windowed resultset. There are lots to discuss for this two functions and we have just explored tip of the iceberg. In future post I will discover it further deep. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • SQL SERVER – Basic Calculation and PEMDAS Order of Operation

    - by pinaldave
    After thinking a long time, I have decided to write about this blog post. I had no plan to create a blog post about this subject but the amount of conversation this one has created on my Facebook page, I decided to bring up a few of the question and concerns discussed on the Facebook page. There are more than 10,000 comments here so far. There are lots of discussion about what should be the answer. Well, as far as I can tell there is a big debate going on on Facebook, for educational purpose you should go ahead and read some of the comments. They are very interesting and for sure teach some new stuff. Even though some of the comments are clearly wrong they have made some good points and I believe it for sure develops some logic. Here is my take on this subject. I believe the answer is 9 as I follow PEMDAS  Order of Operation. PEMDAS stands for  parentheses, exponents, multiplication, division, addition, subtraction. PEMDAS is commonly known as BODMAS in India. BODMAS stands for Brackets, Orders (ie Powers and Square Roots, etc), Division, Multiplication,  Addition and Subtraction. PEMDAS and BODMAS are almost same and both of them follow the operation order from LEFT to RIGHT. Let us try to simplify above statement using the PEMDAS or BODMAS (whatever you prefer to call). Step 1: 6 ÷ 2 (1+2) (parentheses first) Step 2: = 6 ÷ 2 * (1+2) (adding multiplication sign for further clarification) Step 3: = 6 ÷ 2* (3) (single digit in parentheses – simplify using operator) Step 4: = 6 ÷ 2 * 3 (Remember next Operation should be LEFT to RIGHT) Step 5: = 3 * 3 (because 6 ÷ 2 = 3; remember LEFT to RIGHT) Step 6: = 9 (final answer) Some often find Step 4 confusing and often ended up multiplying 2 and 3 resulting Step 5 to be 6 ÷ 6, this is incorrect because in this case we did not follow the order of LEFT to RIGHT. When we do not follow the order of operation from LEFT to RIGHT we end up with the answer 1 which is incorrect. Let us see what SQL Server returns as a result. I executed following statement in SQL Server Management Studio SELECT 6/2*(1+2) It is clear that SQL Server also thinks that the answer should be 9. Let us go ahead and ask Google what will be the answer of above question in Google I have searched for the following term: 6/2(1+2) The result also says the answer should be 9. If you want a further reference here is a great video which describes why the answer should be 9 and not 1. And here is a fantastic conversation on Google Groups. Well, now what is your take on this subject? You are welcome to share constructive feedback and your answer may be different from my answer. NOTE: A healthy conversation about this subject is indeed encouraged but if there is a single bad word or comment is flaming it will be deleted without any notification (it does not matter how valuable information it contains). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Windows Azure Use Case: New Development

    - by BuckWoody
    This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Description: Computing platforms evolve over time. Originally computers were directed by hardware wiring - that, the “code” was the path of the wiring that directed an electrical signal from one component to another, or in some cases a physical switch controlled the path. From there software was developed, first in a very low machine language, then when compilers were created, computer languages could more closely mimic written statements. These language statements can be compiled into the lower-level machine language still used by computers today. Microprocessors replaced logic circuits, sometimes with fewer instructions (Reduced Instruction Set Computing, RISC) and sometimes with more instructions (Complex Instruction Set Computing, CISC). The reason this history is important is that along each technology advancement, computer code has adapted. Writing software for a RISC architecture is significantly different than developing for a CISC architecture. And moving to a Distributed Architecture like Windows Azure also has specific implementation details that our code must follow. But why make a change? As I’ve described, we need to make the change to our code to follow advances in technology. There’s no point in change for its own sake, but as a new paradigm offers benefits to our users, it’s important for us to leverage those benefits where it makes sense. That’s most often done in new development projects. It’s a far simpler task to take a new project and adapt it to Windows Azure than to try and retrofit older code designed in a previous computing environment. We can still use the same coding languages (.NET, Java, C++) to write code for Windows Azure, but we need to think about the architecture of that code on a new project so that it runs in the most efficient, cost-effective way in a Distributed Architecture. As we receive new requests from the organization for new projects, a distributed architecture paradigm belongs in the decision matrix for the platform target. Implementation: When you are designing new applications for Windows Azure (or any distributed architecture) there are many important details to consider. But at the risk of over-simplification, there are three main concepts to learn and architect within the new code: Stateless Programming - Stateless program is a prime concept within distributed architectures. Rather than each server owning the complete processing cycle, the information from an operation that needs to be retained (the “state”) should be persisted to another location c(like storage) common to all machines involved in the process.  An interesting learning process for Stateless Programming (although not unique to this language type) is to learn Functional Programming. Server-Side Processing - Along with developing using a Stateless Design, the closer you can locate the code processing to the data, the less expensive and faster the code will run. When you control the network layer, this is less important, since you can send vast amounts of data between the server and client, allowing the client to perform processing. In a distributed architecture, you don’t always own the network, so it’s performance is unpredictable. Also, you may not be able to control the platform the user is on (such as a smartphone, PC or tablet), so it’s imperative to deliver only results and graphical elements where possible.  Token-Based Authentication - Also called “Claims-Based Authorization”, this code practice means instead of allowing a user to log on once and then running code in that context, a more granular level of security is used. A “token” or “claim”, often represented as a Certificate, is sent along for a series or even one request. In other words, every call to the code is authenticated against the token, rather than allowing a user free reign within the code call. While this is more work initially, it can bring a greater level of security, and it is far more resilient to disconnections. Resources: See the references of “Nondistributed Deployment” and “Distributed Deployment” at the top of this article for more information with graphics:  http://msdn.microsoft.com/en-us/library/ee658120.aspx  Stack Overflow has a good thread on functional programming: http://stackoverflow.com/questions/844536/advantages-of-stateless-programming  Another good discussion on Stack Overflow on server-side processing is here: http://stackoverflow.com/questions/3064018/client-side-or-server-side-processing Claims Based Authorization is described here: http://msdn.microsoft.com/en-us/magazine/ee335707.aspx

    Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >