Search Results

Search found 7463 results on 299 pages for 'personal computers'.

Page 198/299 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• PCs with Wired Connection Keep Losing Internet Connectivity

  - by user717452

  I have a U-verse ATT DSL Internet at our church building. Recently, any computer that is plugged into the network via Ethernet keeps losing its internet connectivity. The setup is from the Modem to a Netgear Wireless Router, and from the router to 3 different computers. None of the laptops that use Wifi ever lose internet, just the wired ones, and I end up having to do ipconfig /release and /renew every day to get it back. One computer has Windows 7 and one has Windows XP. Any ideas as to what is going on with our network?

  Read the article

• How to clear the REPLACEBATT state from APC UPS after hot-swapping the battery

  - by Hubert Kario

  I replaced a battery in APC SmartUPS by hot-swapping. While the swap was all right and didn't disturb connected computers, the "Battery failed" LED on the front face kept glowing. I tried to use apctest from apcups package. Turned off the daemon and run self test (first changing BATTDATE in EEPROM). The test run fine but didn't clear the REPLACEBATT status or the glowing LED. How to clear the failed battery state without powering the UPS and connected equipment down?

  Read the article

• WSUS report hide not approved updates

  - by Mike Christiansen

  I have a WSUS server which is configured as a replica of the upstream server. My parent organization requires that it is a replica. However, they are not always the fastest at approving updates. I would like to know if there is a way to exclude Unapproved updates from the "Updates Needed" tally. I consistently have 2-3 updates missing from all of my computers, and when I check on them, they are all listed as Unapproved. Any way to do this? Thanks!

  Read the article

• Why does the Internet WI-FI connection of my laptop disconnect when I connect the ethernet cable to the LAN?

  - by Joey Hammer

  Why does the Internet WI-FI connection of my laptop disconnect when I connect the ethernet cable to the LAN? These are two separate networks, the LAN is without Internet, I just use it to connect the tablet to the laptop and smart phone in my home network. The WI-FI is owned by the landlady and connects to the Internet. I know it should be possible to be connected both to the Internet through WI-FI and to my other computers and gadgets through the LAN because sometimes it works, but sometimes when I connect the ethernet cable the WI-FI disconnects and I wonder why? Pongy OS: Windows 7

  Read the article

• Filemaker Server Not Installing and Windows Problems

  - by Shelly

  When I tried installing Filemaker Server 8.0 on Windows 2003 Server Standard Edition R2, an error message pop up that states: MMC has detected an error in a snap-in. It is recommended that you shut down and restart MMC. After this message pops up, Filemaker Server freezes. I'm also having problems with openssl and running executable files, but am not sure if the 2 are related. Error message for openssl states: Openssl.exe encountered a problem and needed to close. In one of the computers connected to the network running this same Server 2003 R2, when I tried double-clicking on Dr. Web antivirus to do a scan, nothing happens. I have done this many times before reinstalling the server, and it never gave trouble before this. Any help given is appreciated.

  Read the article

• How can I integrate Octopress into my Rails app?

  - by BeachRunnerFred

  I'm diving into web development and I built my personal website using Ruby on Rails 3.1 and I'd like to add a blog to it. Octopress sounds really awesome, and it's written in Ruby, but I can't find a single resource online that discusses integrating Octopress into a Rails app. I know that's not what it was designed for, but I'm amazed there's no discussion on it considering the popularity of these two technologies. The only resources I can find are discussions on using Octopress to create a stand-alone blog website. How can I integrate Octopress into my existing Rails 3.1 app? Can I set it up as a stand-alone website and integrate it as a sub-domain? Other suggestions? Thanks so much in advance for your wisdom!

  Read the article

• suggest AMD machine for software developement [closed]

  - by superb1

  I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

  Read the article

• Git Clone from SSH Repository

  - by Mike Silvis

  I used to be able to clone from my personal git repository but now i seem to be running into an error. user:dev.site.com mikesilvis$ git clone { my ssh directory } server@ipaddress's password: remote: Counting objects: 3622, done. remote: Compressing objects: 100% (2718/2718), done. error: git upload-pack: git-pack-objects died with error. fatal: git upload-pack: aborting due to possible repository corruption on the remote side. remote: aborting due to possible repository corruption on the remote side. fatal: early EOF fatal: index-pack failed It seems to be working however while I push files to the repository.

  Read the article

• solving network connection problem on xp

  - by doug

  Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

  Read the article

• Good reasons to keep 32-bit desktop OS's

  - by Mark Henderson

  Server software has been 64-bit only for a while now (Since Server 2008 R2 for Windows, even earlier for Exchange and Sharepoint) and even Ubuntu are pushing you away from 32-bit versions for their server OS's. But is there any good, quantifiable reason to keep a 32-bit desktop operating system maintained? We're preparing our Windows 8 images for the (unfortunate?) few that will be early adopters. The majority of our desktop computers have 4gb or less of RAM, but I would love to not have to bother supporting a 32-bit flavoured operating system any more. Any reason why I should?

  Read the article

• Python and database

  - by axl456

  hello.. Am working on a personal project, where i need to manipulate values in a database-like format.. Up until now, am using dictionaries, tuples, and list to store and consult those values. Am thinking about starting to use SQL to manipulate those values, but I dont know if its worth the effort, because I dont know anything about SQL, and I dont want to use something that wont bring me any benefits (if I can do it in a simpler way, i dont want to complicate things) if am only storing and consulting values, what would be the benefit of using SQL? PS: the numbers of row goes between 3 and 100 and the number of columns is around 10 (some may have 5 some may have 10 etc)

  Read the article

• Windows 7 RDP Problem - connecting to external zone with computer names

  - by alex

  I recently installed Windows 7, all is well so far, apart from using RDP to access computers outside my domain. We use a datacenter, outside of our domain. I was using Windows Vista before (not sure if this is relevant) - I could RDP no problem to the machines (using their machine names - Web10 for example) I have changed my IP address to be the same as it was when i was using vista We use a draytek firewall - we use DMZ Host to map my IP to an external ip- which is allowed to access the datacenter I've disabled windows firewall When i try to connect in Remote Desktop client, using Web10, I can't connect, however, if I enter the actual IP address, i can. I have run out of ideas... any help is appreciated!

  Read the article

• User Interface Diagram That is always reachable

  - by Fosa

  If you have to build a flow of a Use-case by drawing each Interface Diagram. Then you would start with a Diagram like say "login". But after the login page, no mather wich page you choose except the "logout" page, you always have your navigation bar right ? So all the options in the navigation bar? Like account page , personal page, etc... Do you have to make sure in your flow that in every diagram there is acces to the "accountpage" diagram ? Or do they have an other solution for that ? Thanx in advance

  Read the article

• Cannot access to any windows share including localhost

  - by user21936

  I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual windows xp can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

  Read the article

• How to set Outlook 2010 to use signatures outside of the default signature folder?

  - by Gregory MOUSSAT

  With Outlook before the 2010 version, it was possible to specify any path for the signatures. With Outlook 2010, the only way is to use those stored into C:\Documents and Setting\UserName\Local Settings\Application Datas\Microsoft\Signature\ I'd like to point the signatures to a network share. Allowing us to modify the signatures into the share, instead of login on every computers each time we are asked to modify them (and this is quite often because the signatures contain logos about current events). We currently use a script to copy the signatures from the share to the local disk when users login.

  Read the article

• How to setup wireless radio to network using 2 nics?

  - by CptanPanic

  I am having problems setting up this network, hopefully someone can help me. Laptop <- Wireless Radio <- ... - Wireless Radio <- CPU1( NIC1,NIC2) <- SWITCH <- CPU2 I have a computer with 2 NICs (CPU1). One goes to a wireless radio that connects to a wireless laptop, the other NIC goes to network switch. I can't connect Wireless Radio to switch due to space constraints. All the machines and radios are on same network addresses. I tried using Window's Bridge network which did allow Laptop to reach CPU2, but not CPU1. What is the way to get this to work so all the computers can talk to each other?

  Read the article

• How to set the network profile of Windows 7 via group policy?

  - by Ricket

  We are deploying client computers and in testing noticed that the first time the user logs into the computer, it asks them if the location is a home, work, or public location. We are worried that some users in our workplace might misread it (or not read it at all) and click Public, thus likely denying our access to the computer and messing up security settings and such. Can we set our network to be a "Work Network" location via group policy or some other mechanism of our Windows Domain so that the user is not prompted when connected to our network? Also these are laptops, so we don't want every network they connect to be set as work network, and we have several access points (wired and three wireless) which our users often switch between so I'm not yet sure if it reprompts with each access point but I have the feeling it will, and I would like all of these to be set to the Work profile type.

  Read the article

• How to create Restoration Partion?

  - by Fellknight

  For some time now, when buying new computers (laptops in particular) from big name brands-like DELL, HP, TOSHIBA, etc.-most of them come with a "rescue" or "restore" partion instead of installation CD/DVD. Said partitions have everything needed to rebuild the factory installed OS, unfortunately they also include all crapware that the OEM installed on the machine. Is it there a way to custom create such a partition with out all the useless software included?. They seem quite appealing considering they only use about 10GB-20GB of space and offer the pretty much the same functionality as a complete system image/backup.

  Read the article

• After binding Mac to AD, first login successfully creates mobile account and logs in, after that next login locks AD account

  - by user132844

  Mac os x 10.7 and 10.8 AD Server 2008 R2 Binding using AD Plugin or dsconfigad -add mydomain -username myuser -ou "OU=Computers,OU=Sites,OU=Mysite,DC=mycompany,DC=com" Works fine. First login happens fine. Creates mobile account, no issues noticed. After I logout, the next login attempt fails, and after only shaking one time, their AD account is locked out. opendirectory.log makes a vague mention of account being expired but honestly I don't see much in the logs that pops out as useful. Any help?

  Read the article

• 8 Character Device names

  - by Lee Harrison

  Is there any reason to still use only 8 characters in a device name? My boss still uses this rule for printers, computers, routers, servers... basicly any device connected to our network. This leads to massive confusion among users, especially when it comes to printer. It also leads to confusion from an administration standpoint because every device is named vaguely, and similarly(its only 8 characters!). I understand the history behind this and compatibility with older systems, but none of our legacy systems will ever make use of PS-printers and Wifi networks. Is there any reason to still do this, and what is everyone else doing when it comes to naming network devices at an enterprise level?

  Read the article

• How to forward http traffic through a specific network adapter.

  - by user18129

  i have the following scenario. Two laptops are connected via a router through the Ethernet ports. These two computers need to be able to communicate together. One computer also needs to access the internet through a different adapter (i.e. we will taking these two laptops two various sites where by the most common type of internet access will be wireless).In isolation all of the various adapters work fine (i.e. the internal network works fine, and the wireless connects to the internet). However,we try to turn on all of the adapters at the same time,the following occurs: If we bridge the two network connections together on the "Server" -The internet connection doesn't work through the wireless If we don't bridge the connections The internet connections don't work It seems like http traffic is trying to be sent through the Ethernet adapter (which of course is not connected to an internet connection). How can we solve this?

  Read the article

• Small footprint on a Laptop

  - by sqldebacle

  I am trying to find a solution where I can do the following: 1) Run a small footprint on my laptop 2) Run virtual instances of OS w/ no primary OS installed. All the OS that I will ever use will be all virtualized. I tried playing around with the VMware Esxi, and got it to boot it from the flash drive, etc. But this just runs the server. I cannot actually run my virtual instances from there. Anyone has done this? Something similar implemented with VMWare products without needing 2 computers will be great. Thanks, -Subhash

  Read the article

• netsh advfirewall firewall

  - by lehn0058

  I am trying to write a script to configure a windows firewall (server 2008 & 2012 only) to adjust certain firewall settings after a machine has been added to a domain. I need to do this because one of the pre-installed programs on these machines we get only has the firewall rules setup for the public and private firewall profile. This script will be pushed out for other admins to use, and some of the machine will be in other languages. The command to change an existing firewall rule is as follows: netsh advfirewall firewall set rule name = "rule name goes here" new profile=domain This command works great. However, I need to do this for about 10 firewall ports AND since the program could be installed on computers with different languages, I can not just pass the name of all of the firewall rules. Is their some way to do this by supplying the port number? Or some way to specify a regular expression so I could use any rule that has a name LIKE 'test'?

  Read the article

• If a change the CPU, must I reinstall the OS?

  - by dag729

  Hi, as suggested by the title, I want to change CPU: actually I have two computers, one with Ubuntu running on an AMD Athlon 64 dual core 5200+ and the other with FreeBSD running on an AMD Sempron single core LE-1250. I would like to swap (I am not sure that this is the correct term...) the CPUs from one computer to the other one, that is take the dual core from the ubuntu pc and put it inside the freebsd pc and viceversa. The mobo is the same. Do you think I will encounter problems?

  Read the article

• ValidateRequest="false" doesn't work when posting HTML values

  - by Ivan90

  I am developing a personal blog in ASP.NET MVC 1.0. This blog application has Views like "Insert Post", "Edit Post", etc. I need to post a string containing HTML back to the appropriate controller method. That HTML value is being posted from a textarea. I've read that it's necessary to disable ValidateRequest directly on the page with the attribute ValidateRequest = "false" or in the web.config file. When I insert an HTML value in my textarea, I get always the error of 'potential value dangerous'. How can I use ValidateRequest to allow the form element containing HTML values to be posted?

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >