Search Results

Search found 6123 results on 245 pages for 'unsigned char'.

Page 199/245 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

  • Is it possible to pass a structure of delegates from managed to native?

    - by Veiva
    I am writing a wrapper for the game programming library "Allegro" and its less stable 4.9 branch. Now, I have done good insofar, except for when it comes to wrapping a structure of function pointers. Basically, I can't change the original code, despite having access to it, because that would require me to fork it in some manner. I need to know how I can somehow pass a structure of delegates from managed to native without causing an AccessViolationException that has occurred so far. Now, for the code. Here is the Allegro definition of the structure: typedef struct ALLEGRO_FILE_INTERFACE { AL_METHOD(ALLEGRO_FILE*, fi_fopen, (const char *path, const char *mode)); AL_METHOD(void, fi_fclose, (ALLEGRO_FILE *handle)); AL_METHOD(size_t, fi_fread, (ALLEGRO_FILE *f, void *ptr, size_t size)); AL_METHOD(size_t, fi_fwrite, (ALLEGRO_FILE *f, const void *ptr, size_t size)); AL_METHOD(bool, fi_fflush, (ALLEGRO_FILE *f)); AL_METHOD(int64_t, fi_ftell, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_fseek, (ALLEGRO_FILE *f, int64_t offset, int whence)); AL_METHOD(bool, fi_feof, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_ferror, (ALLEGRO_FILE *f)); AL_METHOD(int, fi_fungetc, (ALLEGRO_FILE *f, int c)); AL_METHOD(off_t, fi_fsize, (ALLEGRO_FILE *f)); } ALLEGRO_FILE_INTERFACE; My simple attempt at wrapping it: public delegate IntPtr AllegroInternalOpenFileDelegate(string path, string mode); public delegate void AllegroInternalCloseFileDelegate(IntPtr file); public delegate int AllegroInternalReadFileDelegate(IntPtr file, IntPtr data, int size); public delegate int AllegroInternalWriteFileDelegate(IntPtr file, IntPtr data, int size); public delegate bool AllegroInternalFlushFileDelegate(IntPtr file); public delegate long AllegroInternalTellFileDelegate(IntPtr file); public delegate bool AllegroInternalSeekFileDelegate(IntPtr file, long offset, int where); public delegate bool AllegroInternalIsEndOfFileDelegate(IntPtr file); public delegate bool AllegroInternalIsErrorFileDelegate(IntPtr file); public delegate int AllegroInternalUngetCharFileDelegate(IntPtr file, int c); public delegate long AllegroInternalFileSizeDelegate(IntPtr file); [StructLayout(LayoutKind.Sequential, Pack = 0)] public struct AllegroInternalFileInterface { [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalOpenFileDelegate fi_fopen; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalCloseFileDelegate fi_fclose; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalReadFileDelegate fi_fread; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalWriteFileDelegate fi_fwrite; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFlushFileDelegate fi_fflush; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalTellFileDelegate fi_ftell; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalSeekFileDelegate fi_fseek; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsEndOfFileDelegate fi_feof; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsErrorFileDelegate fi_ferror; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalUngetCharFileDelegate fi_fungetc; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFileSizeDelegate fi_fsize; } I have a simple auxiliary wrapper that turns an ALLEGRO_FILE_INTERFACE into an ALLEGRO_FILE, like so: #define ALLEGRO_NO_MAGIC_MAIN #include <allegro5/allegro5.h> #include <stdlib.h> #include <string.h> #include <assert.h> __declspec(dllexport) ALLEGRO_FILE * al_aux_create_file(ALLEGRO_FILE_INTERFACE * fi) { ALLEGRO_FILE * file; assert(fi && "`fi' null"); file = (ALLEGRO_FILE *)malloc(sizeof(ALLEGRO_FILE)); if (!file) return NULL; file->vtable = (ALLEGRO_FILE_INTERFACE *)malloc(sizeof(ALLEGRO_FILE_INTERFACE)); if (!(file->vtable)) { free(file); return NULL; } memcpy(file->vtable, fi, sizeof(ALLEGRO_FILE_INTERFACE)); return file; } __declspec(dllexport) void al_aux_destroy_file(ALLEGRO_FILE * f) { assert(f && "`f' null"); assert(f->vtable && "`f->vtable' null"); free(f->vtable); free(f); } Lastly, I have a class that accepts a Stream and provides the proper methods to interact with the stream. Just to make sure, here it is: /// <summary> /// A semi-opaque data type that allows one to load fonts, etc from a stream. /// </summary> public class AllegroFile : AllegroResource, IDisposable { AllegroInternalFileInterface fileInterface; Stream fileStream; /// <summary> /// Gets the file interface. /// </summary> internal AllegroInternalFileInterface FileInterface { get { return fileInterface; } } /// <summary> /// Constructs an Allegro file from the stream provided. /// </summary> /// <param name="stream">The stream to use.</param> public AllegroFile(Stream stream) { fileStream = stream; fileInterface = new AllegroInternalFileInterface(); fileInterface.fi_fopen = Open; fileInterface.fi_fclose = Close; fileInterface.fi_fread = Read; fileInterface.fi_fwrite = Write; fileInterface.fi_fflush = Flush; fileInterface.fi_ftell = GetPosition; fileInterface.fi_fseek = Seek; fileInterface.fi_feof = GetIsEndOfFile; fileInterface.fi_ferror = GetIsError; fileInterface.fi_fungetc = UngetCharacter; fileInterface.fi_fsize = GetLength; Resource = AllegroFunctions.al_aux_create_file(ref fileInterface); if (!IsValid) throw new AllegroException("Unable to create file"); } /// <summary> /// Disposes of all resources. /// </summary> ~AllegroFile() { Dispose(); } /// <summary> /// Disposes of all resources used. /// </summary> public void Dispose() { if (IsValid) { Resource = IntPtr.Zero; // Should call AllegroFunctions.al_aux_destroy_file fileStream.Dispose(); } } IntPtr Open(string path, string mode) { return IntPtr.Zero; } void Close(IntPtr file) { fileStream.Close(); } int Read(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; int read = fileStream.Read(d, 0, size); Marshal.Copy(d, 0, data, size); return read; } int Write(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; Marshal.Copy(data, d, 0, size); fileStream.Write(d, 0, size); return size; } bool Flush(IntPtr file) { fileStream.Flush(); return true; } long GetPosition(IntPtr file) { return fileStream.Position; } bool Seek(IntPtr file, long offset, int whence) { SeekOrigin origin = SeekOrigin.Begin; if (whence == 1) origin = SeekOrigin.Current; else if (whence == 2) origin = SeekOrigin.End; fileStream.Seek(offset, origin); return true; } bool GetIsEndOfFile(IntPtr file) { return fileStream.Position == fileStream.Length; } bool GetIsError(IntPtr file) { return false; } int UngetCharacter(IntPtr file, int character) { return -1; } long GetLength(IntPtr file) { return fileStream.Length; } } Now, when I do something like this: AllegroFile file = new AllegroFile(new FileStream("Test.bmp", FileMode.Create, FileAccess.ReadWrite)); bitmap.SaveToFile(file, ".bmp"); ...I get an AccessViolationException. I think I understand why (the garbage collector can relocate structs and classes whenever), but I'd think that the method stub that is created by the framework would take this into consideration and route the calls to the valid classes. However, it seems obviously so that I'm wrong. So basically, is there any way I can successfully wrap that structure? (And I'm sorry for all the code! Hope it's not too much...)

    Read the article

  • What's the C strategy to "imitate" a C++ template ?

    - by Andrei Ciobanu
    After reading some examples on stackoverflow, and following some of the answers for my previous questions (1), I've eventually come with a "strategy" for this. I've come to this: 1) Have a declare section in the .h file. Here I will define the data-structure, and the accesing interface. Eg.: /** * LIST DECLARATION. (DOUBLE LINKED LIST) */ #define NM_TEMPLATE_DECLARE_LIST(type) \ typedef struct nm_list_elem_##type##_s { \ type data; \ struct nm_list_elem_##type##_s *next; \ struct nm_list_elem_##type##_s *prev; \ } nm_list_elem_##type ; \ typedef struct nm_list_##type##_s { \ unsigned int size; \ nm_list_elem_##type *head; \ nm_list_elem_##type *tail; \ int (*cmp)(const type e1, const type e2); \ } nm_list_##type ; \ \ nm_list_##type *nm_list_new_##type##_(int (*cmp)(const type e1, \ const type e2)); \ \ (...other functions ...) 2) Wrap the functions in the interface inside MACROS: /** * LIST INTERFACE */ #define nm_list(type) \ nm_list_##type #define nm_list_elem(type) \ nm_list_elem_##type #define nm_list_new(type,cmp) \ nm_list_new_##type##_(cmp) #define nm_list_delete(type, list, dst) \ nm_list_delete_##type##_(list, dst) #define nm_list_ins_next(type,list, elem, data) \ nm_list_ins_next_##type##_(list, elem, data) (...others...) 3) Implement the functions: /** * LIST FUNCTION DEFINITIONS */ #define NM_TEMPLATE_DEFINE_LIST(type) \ nm_list_##type *nm_list_new_##type##_(int (*cmp)(const type e1, \ const type e2)) \ {\ nm_list_##type *list = NULL; \ list = nm_alloc(sizeof(*list)); \ list->size = 0; \ list->head = NULL; \ list->tail = NULL; \ list->cmp = cmp; \ }\ void nm_list_delete_##type##_(nm_list_##type *list, \ void (*destructor)(nm_list_elem_##type elem)) \ { \ type data; \ while(nm_list_size(list)){ \ data = nm_list_rem_##type(list, tail); \ if(destructor){ \ destructor(data); \ } \ } \ nm_free(list); \ } \ (...others...) In order to use those constructs, I have to create two files (let's call them templates.c and templates.h) . In templates.h I will have to NM_TEMPLATE_DECLARE_LIST(int), NM_TEMPLATE_DECLARE_LIST(double) , while in templates.c I will need to NM_TEMPLATE_DEFINE_LIST(int) , NM_TEMPLATE_DEFINE_LIST(double) , in order to have the code behind a list of ints, doubles and so on, generated. By following this strategy I will have to keep all my "template" declarations in two files, and in the same time, I will need to include templates.h whenever I need the data structures. It's a very "centralized" solution. Do you know other strategy in order to "imitate" (at some point) templates in C++ ? Do you know a way to improve this strategy, in order to keep things in more decentralized manner, so that I won't need the two files: templates.c and templates.h ?

    Read the article

  • How to set background in OpenGL captured image from OpenCV

    - by user325487
    Hey All, i'm relatively new to Artoolkitplus and openGL i'm having a tough time getting the image i capture through openCV to be set as the background image in OpenGL ... I also cannot convert the image i take through the camera using opencv to be scaled to 320x280 from 640x480 .. i also have to save my image and load if for things to work... here's my code //////////// int findMarker() { IplImage* image = cvQueryFrame( capture ); if( !capture ) { fprintf( stderr, "ERROR: capture is NULL \n" ); getchar(); return -1; } if( !image ) { fprintf( stderr, "ERROR: frame is null...\n" ); getchar(); } //cvShowImage( "Capture", frame ); //image = cvCloneImage( frame ); try{ if(!cvSaveImage("immagineTmp.jpg",image)) printf("Could not save\n"); } catch(void*) {} image = cvLoadImage("immagineTmp.jpg", 1); cvShowImage( "Image", image ); glLoadIdentity(); ////////////// glDisable(GL_DEPTH_TEST); glOrtho(0,640,0,480,-1,1); glGenTextures(1, &bgid); glBindTexture(GL_TEXTURE_2D, bgid); // Create Linear Filtered Texture glBindTexture(GL_TEXTURE_2D, bgid); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, 3, image-width, image-height, 0, GL_RGB, GL_UNSIGNED_BYTE, image-imageData); glBindTexture(GL_TEXTURE_2D, bgid); glBegin(GL_QUADS); glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.2f, -1.0f, -2.0f); glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.2f, -1.0f, -2.0f); glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.2f, 1.0f, -2.0f); glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.2f, 1.0f, -2.0f); glEnd(); glEnable(GL_DEPTH_TEST); glLoadIdentity(); //////////// // do the OpenGL camera setup glMatrixMode(GL_PROJECTION); glLoadMatrixf(tracker-getProjectionMatrix()); int markerId = tracker-calc((unsigned char *)(image-imageData)); float conf = tracker-getConfidence(); // use the result of calc() to setup the OpenGL transformation glMatrixMode(GL_MODELVIEW); glLoadMatrixf(tracker-getModelViewMatrix()); if(markerId!=-1) { printf("\n\nFound marker %d (confidence %d%%)\n\nPose-Matrix:\n ", markerId, (int(conf*100.0f))); for(int i=0; i<16; i++) printf("%.2f %s", tracker-getModelViewMatrix()[i], (i%4==3)?"\n " : ""); } cvReleaseImage(&image); return 0; }

    Read the article

  • php syntax error

    - by Jacksta
    I have 3 files 1) show_createtable.html 2) do_showfielddef.php 3) do_showtble.php 1) First file is for creating a new table for a data base, it is a fom with 2 inputs, Table Name and Number of Fields. THIS WORKS FINE! <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> <h1>Step 1: Name and Number</h1> <form method="post" action="do_showfielddef.php" /> <p><strong>Table Name:</strong><br /> <input type="text" name="table_name" size="30" /></p> <p><strong>Number of fields:</strong><br /> <input type="text" name="num_fields" size="30" /></p> <p><input type="submit" name="submit" value="go to step2" /></p> </form> </body> </html> 2) this script validates fields and createa another form to enter all the table rows. This for also WORKS FINE! <?php //validate important input if ((!$_POST[table_name]) || (!$_POST[num_fields])) { header( "location: show_createtable.html"); exit; } //begin creating form for display $form_block = " <form action=\"do_createtable.php\" method=\"post\"> <input name=\"table_name\" type=\"hidden\" value=\"$_POST[table_name]\"> <table cellspacing=\"5\" cellpadding=\"5\"> <tr> <th>Field Name</th><th>Field Type</th><th>Table Length</th> </tr>"; //count from 0 until you reach the number fo fields for ($i = 0; $i <$_POST[num_fields]; $i++) { $form_block .=" <tr> <td align=center><input type=\"texr\" name=\"field name[]\" size=\"30\"></td> <td align=center> <select name=\"field_type[]\"> <option value=\"char\">char</option> <option value=\"date\">date</option> <option value=\"float\">float</option> <option value=\"int\">int</option> <option value=\"text\">text</option> <option value=\"varchar\">varchar</option> </select> </td> <td align=center><input type=\"text\" name=\"field_length[]\" size=\"5\"> </td> </tr>"; } //finish up the form $form_block .= " <tr> <td align=center colspan=3><input type =\"submit\" value=\"create table\"> </td> </tr> </table> </form>"; ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Create a database table: Step 2</title> </head> <body> <h1>defnie fields for <? echo "$_POST[table_name]"; ?> </h1> <? echo "$form_block"; ?> </body> </html> Problem is here 3) this form creates the tables and enteres them into the database. I am getting an error on line 37 "Parse error: syntax error, unexpected $end in /home/admin/domains/domaina.com.au/public_html/do_createtable.php on line 37" <? $db_name = "testDB"; $connection = @mysql_connect("localhost", "admin_user", "pass") or die(mysql_error()); $db = @mysql_select_db($db_name, $connection) or die(mysql_error()); $sql = "CREATE TABLE $_POST[table_name]("; for ($i = 0; $i < count($_POST[field_name]); $i++) { $sql .= $_POST[field_name][$i]." ".$_POST[field_type][$i]; if ($_POST[field_length][$i] !="") { $sql .=" (".$_POST[field_length][$i]."),"; } else { $sql .=","; } $sql = substr($sql, 0, -1); $sql .= ")"; $result = mysql_query($sql, $connection) or die(mysql_error()); if ($result) { $msg = "<p>" .$_POST[table_name]." has been created!</p>"; ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Create A Database Table: Step 3</title> </head> <body> <h1>Adding table to <? echo "$db_name"; ?>...</h1> <? echo "$msg"; ?> </body> </html>

    Read the article

  • PHP syntax error “unexpected $end”

    - by Jacksta
    I have 3 files 1) show_createtable.html 2) do_showfielddef.php 3) do_showtble.php 1) First file is for creating a new table for a data base, it is a fom with 2 inputs, Table Name and Number of Fields. THIS WORKS FINE! <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> <h1>Step 1: Name and Number</h1> <form method="post" action="do_showfielddef.php" /> <p><strong>Table Name:</strong><br /> <input type="text" name="table_name" size="30" /></p> <p><strong>Number of fields:</strong><br /> <input type="text" name="num_fields" size="30" /></p> <p><input type="submit" name="submit" value="go to step2" /></p> </form> </body> </html> 2) this script validates fields and createa another form to enter all the table rows. This for also WORKS FINE! <?php //validate important input if ((!$_POST[table_name]) || (!$_POST[num_fields])) { header( "location: show_createtable.html"); exit; } //begin creating form for display $form_block = " <form action=\"do_createtable.php\" method=\"post\"> <input name=\"table_name\" type=\"hidden\" value=\"$_POST[table_name]\"> <table cellspacing=\"5\" cellpadding=\"5\"> <tr> <th>Field Name</th><th>Field Type</th><th>Table Length</th> </tr>"; //count from 0 until you reach the number fo fields for ($i = 0; $i <$_POST[num_fields]; $i++) { $form_block .=" <tr> <td align=center><input type=\"texr\" name=\"field name[]\" size=\"30\"></td> <td align=center> <select name=\"field_type[]\"> <option value=\"char\">char</option> <option value=\"date\">date</option> <option value=\"float\">float</option> <option value=\"int\">int</option> <option value=\"text\">text</option> <option value=\"varchar\">varchar</option> </select> </td> <td align=center><input type=\"text\" name=\"field_length[]\" size=\"5\"> </td> </tr>"; } //finish up the form $form_block .= " <tr> <td align=center colspan=3><input type =\"submit\" value=\"create table\"> </td> </tr> </table> </form>"; ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Create a database table: Step 2</title> </head> <body> <h1>defnie fields for <? echo "$_POST[table_name]"; ?> </h1> <? echo "$form_block"; ?> </body> </html> Problem is here 3) this form creates the tables and enteres them into the database. I am getting an error on line 37 "Parse error: syntax error, unexpected $end in /home/admin/domains/domaina.com.au/public_html/do_createtable.php on line 37" <? $db_name = "testDB"; $connection = @mysql_connect("localhost", "admin_user", "pass") or die(mysql_error()); $db = @mysql_select_db($db_name, $connection) or die(mysql_error()); $sql = "CREATE TABLE $_POST[table_name]("; for ($i = 0; $i < count($_POST[field_name]); $i++) { $sql .= $_POST[field_name][$i]." ".$_POST[field_type][$i]; if ($_POST[field_length][$i] !="") { $sql .=" (".$_POST[field_length][$i]."),"; } else { $sql .=","; } $sql = substr($sql, 0, -1); $sql .= ")"; $result = mysql_query($sql, $connection) or die(mysql_error()); if ($result) { $msg = "<p>" .$_POST[table_name]." has been created!</p>"; ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Create A Database Table: Step 3</title> </head> <body> <h1>Adding table to <? echo "$db_name"; ?>...</h1> <? echo "$msg"; ?> </body> </html>

    Read the article

  • JNI String Corruption

    - by Chris Dennett
    Hi everyone, I'm getting weird string corruption across JNI calls which is causing problems on the the Java side. Every so often, I'll get a corrupted string in the passed array, which sometimes has existing parts of the original non-corrupted string. The C++ code is supposed to set the first index of the array to the address, it's a nasty hack to get around method call limitations. Additionally, the application is multi-threaded. remoteaddress[0]: 10.1.1.2:49153 remoteaddress[0]: 10.1.4.2:49153 remoteaddress[0]: 10.1.6.2:49153 remoteaddress[0]: 10.1.2.2:49153 remoteaddress[0]: 10.1.9.2:49153 remoteaddress[0]: {garbage here} java.lang.NullPointerException at kokuks.KKSAddress.<init>(KKSAddress.java:139) at kokuks.KKSAddress.createAddress(KKSAddress.java:48) at kokuks.KKSSocket._recvFrom(KKSSocket.java:963) at kokuks.scheduler.RecvOperation$1.execute(RecvOperation.java:144) at kokuks.scheduler.RecvOperation$1.execute(RecvOperation.java:1) at kokuks.KKSEvent.run(KKSEvent.java:58) at kokuks.KokuKS.handleJNIEventExpiry(KokuKS.java:872) at kokuks.KokuKS.handleJNIEventExpiry_fjni(KokuKS.java:880) at kokuks.KokuKS.runSimulator_jni(Native Method) at kokuks.KokuKS$1.run(KokuKS.java:773) at java.lang.Thread.run(Thread.java:717) remoteaddress[0]: 10.1.7.2:49153 The null pointer exception comes from trying to use the corrupt string. In C++, the address prints to standard out normally, but doing this reduces the rate of errors, from what I can see. The C++ code (if it helps): /* * Class: kokuks_KKSSocket * Method: recvFrom_jni * Signature: (Ljava/lang/String;[Ljava/lang/String;Ljava/nio/ByteBuffer;IIJ)I */ JNIEXPORT jint JNICALL Java_kokuks_KKSSocket_recvFrom_1jni (JNIEnv *env, jobject obj, jstring sockpath, jobjectArray addrarr, jobject buf, jint position, jint limit, jlong flags) { if (addrarr && env->GetArrayLength(addrarr) > 0) { env->SetObjectArrayElement(addrarr, 0, NULL); } jboolean iscopy; const char* cstr = env->GetStringUTFChars(sockpath, &iscopy); std::string spath = std::string(cstr); env->ReleaseStringUTFChars(sockpath, cstr); // release me! if (KKS_DEBUG) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << std::endl; } ns3::Ptr<ns3::Socket> socket = ns3::Names::Find<ns3::Socket>(spath); if (!socket) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " socket not found for path!!" << std::endl; return -1; // not found } if (!addrarr) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " array to set sender is null" << std::endl; return -1; } jsize arrsize = env->GetArrayLength(addrarr); if (arrsize < 1) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " array too small to set sender!" << std::endl; return -1; } uint8_t* bufaddr = (uint8_t*)env->GetDirectBufferAddress(buf); long bufcap = env->GetDirectBufferCapacity(buf); uint8_t* realbufaddr = bufaddr + position; uint32_t remaining = limit - position; if (KKS_DEBUG) { std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " bufaddr: " << bufaddr << ", cap: " << bufcap << std::endl; } ns3::Address aaddr; uint32_t mflags = flags; int ret = socket->RecvFrom(realbufaddr, remaining, mflags, aaddr); if (ret > 0) { if (KKS_DEBUG) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " addr: " << aaddr << std::endl; ns3::InetSocketAddress insa = ns3::InetSocketAddress::ConvertFrom(aaddr); std::stringstream ss; insa.GetIpv4().Print(ss); ss << ":" << insa.GetPort() << std::ends; if (KKS_DEBUG) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " addr: " << ss.str() << std::endl; jsize index = 0; const char *cstr = ss.str().c_str(); jstring jaddr = env->NewStringUTF(cstr); if (jaddr == NULL) std::cout << "[kks-c~" << spath << "] " << __PRETTY_FUNCTION__ << " jaddr is null!!" << std::endl; //jaddr = (jstring)env->NewGlobalRef(jaddr); env->SetObjectArrayElement(addrarr, index, jaddr); //if (env->ExceptionOccurred()) { // env->ExceptionDescribe(); //} } jint jret = ret; return jret; } The Java code (if it helps): /** * Pass an array of size 1 into remote address, and this will be set with * the sender of the packet (hax). This emulates C++ references. * * @param remoteaddress * @param buf * @param flags * @return */ public int _recvFrom(final KKSAddress remoteaddress[], ByteBuffer buf, long flags) { if (!kks.isCurrentlyThreadSafe()) throw new RuntimeException( "Not currently thread safe for ns-3 functions!" ); //lock.lock(); try { if (!buf.isDirect()) return -6; // not direct!! final String[] remoteAddrStr = new String[1]; int ret = 0; ret = recvFrom_jni( path.toPortableString(), remoteAddrStr, buf, buf.position(), buf.limit(), flags ); if (ret > 0) { System.out.println("remoteaddress[0]: " + remoteAddrStr[0]); remoteaddress[0] = KKSAddress.createAddress(remoteAddrStr[0]); buf.position(buf.position() + ret); } return ret; } finally { errNo = _getErrNo(); //lock.unlock(); } } public int recvFrom(KKSAddress[] fromaddress, final ByteBuffer bytes, long flags, long timeoutMS) { if (KokuKS.DEBUG_MODE) printMessage("public synchronized int recvFrom(KKSAddress[] fromaddress, final ByteBuffer bytes, long flags, long timeoutMS)"); if (kks.isCurrentlyThreadSafe()) { return _recvFrom(fromaddress, bytes, flags); // avoid event } fromaddress[0] = null; RecvOperation ro = new RecvOperation( kks, this, flags, true, bytes, timeoutMS ); ro.start(); fromaddress[0] = ro.getFrom(); return ro.getRetCode(); }

    Read the article

  • Script to create a table and fields in SQL wont work

    - by Jacksta
    Warning this is lenghty! attack if you knowledagble. well at least more then a newb beginner like me. This script uses three files as detailed below. It is suppoed to create the database and fields from the form input. It gets to the end and shows my_contacts has been created!. But when i go into phpMyadmin the table has not been created. I have a file named show_createtable.html which is used to create a table in MySQL <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Untitled Document</title> </head> <body> <h1>Step 1: Name and Number</h1> <form method="post" action="do_showfielddef.php" /> <p><strong>Table Name:</strong><br /> <input type="text" name="table_name" size="30" /></p> <p><strong>Number of fields:</strong><br /> <input type="text" name="num_fields" size="30" /></p> <p><input type="submit" name="submit" value="go to step2" /></p> </form> </body> </html> This Form Posts to do_showfielddef.php <?php //validate important input if ((!$_POST[table_name]) || (!$_POST[num_fields])) { header( "location: show_createtable.html"); exit; } //begin creating form for display $form_block = " <form action=\"do_createtable.php\" method=\"post\"> <input name=\"table_name\" type=\"hidden\" value=\"$_POST[table_name]\"> <table cellspacing=\"5\" cellpadding=\"5\"> <tr> <th>Field Name</th><th>Field Type</th><th>Table Length</th><th>Primary Key?</th><th>Auto-Increment?</th> </tr>"; //count from 0 until you reach the number fo fields for ($i = 0; $i <$_POST[num_fields]; $i++) { $form_block .=" <tr> <td align=center><input type=\"texr\" name=\"field name[]\" size=\"30\"></td> <td align=center> <select name=\"field_type[]\"> <option value=\"char\">char</option> <option value=\"date\">date</option> <option value=\"float\">float</option> <option value=\"int\">int</option> <option value=\"text\">text</option> <option value=\"varchar\">varchar</option> </select> </td> <td align=center><input type=\"text\" name=\"field_length[]\" size=\"5\"></td> <td aligh=center><input type=\"checkbox\" name=\"primary[]\" value=\"Y\"></td> <td aligh=center><input type=\"checkbox\" name=\"auto_increment[]\" value=\"Y\"></td> </tr>"; } //finish up the form $form_block .= " <tr> <td align=center colspan=3><input type =\"submit\" value=\"create table\"> </td> </tr> </table> </form>"; ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Create a database table: Step 2</title> </head> <body> <h1>defnie fields for <? echo "$_POST[table_name]"; ?> </h1> <? echo "$form_block"; ?> </body> </html> Which in turn creates the table and fields with this file do_showfielddef.php //connect to database $connection = @mysql_connect("localhost", "user", "pass") or die(mysql_error()); $db = @mysql_select_db($db_name, $connection) or die(mysql_error()); //start creating the SQL statement $sql = "CREATE TABLE $_POST[table_name]("; //continue the SQL statement for each new field for ($i = 0; $i < count($_POST[field_name]); $i++) { $sql .= $_POST[field_name][$i]." ".$_POST[field_type][$i]; if ($_POST[auto_increment][$i] =="Y") { $additional = "NOT NULL auto_increment"; } else { $additional = ""; } if ($_POST[primary][$i] =="Y") { $additional .= ", primary key (".$_POST[field_name][$i].")"; } else { $additional = ""; } if ($_POST[field_length][$i] !="") { $sql .= " (".$_POST[field_length][$i].") $additional ,"; } else { $sql .=" $additional ,"; } } //clean up the end of the string $sql = substr($sql, 0, -1); $sql .= ")"; //execute the query $result = mysql_query($sql, $connection) or die(mysql_error()); //get a giid message for display upon success if ($result) { $msg = "<p>" .$_POST[table_name]." has been created!</p>"; } ?> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Create A Database Table: Step 3</title> </head> <body> <h1>Adding table to <? echo "$db_name"; ?>...</h1> <? echo "$msg"; ?> </body> </html>

    Read the article

  • Microbenchmark showing process-switching faster than thread-switching; what's wrong?

    - by Yang
    I have two simple microbenchmarks trying to measure thread- and process-switching overheads, but the process-switching overhead. The code is living here, and r1667 is pasted below: https://assorted.svn.sourceforge.net/svnroot/assorted/sandbox/trunk/src/c/process_switch_bench.c // on zs, ~2.1-2.4us/switch #include <stdlib.h> #include <fcntl.h> #include <stdint.h> #include <stdio.h> #include <semaphore.h> #include <unistd.h> #include <sys/wait.h> #include <sys/types.h> #include <sys/time.h> #include <pthread.h> uint32_t COUNTER; pthread_mutex_t LOCK; pthread_mutex_t START; sem_t *s0, *s1, *s2; void * threads ( void * unused ) { // Wait till we may fire away sem_wait(s2); for (;;) { pthread_mutex_lock(&LOCK); pthread_mutex_unlock(&LOCK); COUNTER++; sem_post(s0); sem_wait(s1); } return 0; } int64_t timeInMS () { struct timeval t; gettimeofday(&t, NULL); return ( (int64_t)t.tv_sec * 1000 + (int64_t)t.tv_usec / 1000 ); } int main ( int argc, char ** argv ) { int64_t start; pthread_t t1; pthread_mutex_init(&LOCK, NULL); COUNTER = 0; s0 = sem_open("/s0", O_CREAT, 0022, 0); if (s0 == 0) { perror("sem_open"); exit(1); } s1 = sem_open("/s1", O_CREAT, 0022, 0); if (s1 == 0) { perror("sem_open"); exit(1); } s2 = sem_open("/s2", O_CREAT, 0022, 0); if (s2 == 0) { perror("sem_open"); exit(1); } int x, y, z; sem_getvalue(s0, &x); sem_getvalue(s1, &y); sem_getvalue(s2, &z); printf("%d %d %d\n", x, y, z); pid_t pid = fork(); if (pid) { pthread_create(&t1, NULL, threads, NULL); pthread_detach(t1); // Get start time and fire away start = timeInMS(); sem_post(s2); sem_post(s2); // Wait for about a second sleep(1); // Stop thread pthread_mutex_lock(&LOCK); // Find out how much time has really passed. sleep won't guarantee me that // I sleep exactly one second, I might sleep longer since even after being // woken up, it can take some time before I gain back CPU time. Further // some more time might have passed before I obtained the lock! int64_t time = timeInMS() - start; // Correct the number of thread switches accordingly COUNTER = (uint32_t)(((uint64_t)COUNTER * 2 * 1000) / time); printf("Number of process switches in about one second was %u\n", COUNTER); printf("roughly %f microseconds per switch\n", 1000000.0 / COUNTER); // clean up kill(pid, 9); wait(0); sem_close(s0); sem_close(s1); sem_unlink("/s0"); sem_unlink("/s1"); sem_unlink("/s2"); } else { if (1) { sem_t *t = s0; s0 = s1; s1 = t; } threads(0); // never return } return 0; } https://assorted.svn.sourceforge.net/svnroot/assorted/sandbox/trunk/src/c/thread_switch_bench.c // From <http://stackoverflow.com/questions/304752/how-to-estimate-the-thread-context-switching-overhead> // on zs, ~4-5us/switch; tried making COUNTER updated only by one thread, but no difference #include <stdlib.h> #include <stdint.h> #include <stdio.h> #include <pthread.h> #include <unistd.h> #include <sys/time.h> uint32_t COUNTER; pthread_mutex_t LOCK; pthread_mutex_t START; pthread_cond_t CONDITION; void * threads ( void * unused ) { // Wait till we may fire away pthread_mutex_lock(&START); pthread_mutex_unlock(&START); int first=1; pthread_mutex_lock(&LOCK); // If I'm not the first thread, the other thread is already waiting on // the condition, thus Ihave to wake it up first, otherwise we'll deadlock if (COUNTER > 0) { pthread_cond_signal(&CONDITION); first=0; } for (;;) { if (first) COUNTER++; pthread_cond_wait(&CONDITION, &LOCK); // Always wake up the other thread before processing. The other // thread will not be able to do anything as long as I don't go // back to sleep first. pthread_cond_signal(&CONDITION); } pthread_mutex_unlock(&LOCK); return 0; } int64_t timeInMS () { struct timeval t; gettimeofday(&t, NULL); return ( (int64_t)t.tv_sec * 1000 + (int64_t)t.tv_usec / 1000 ); } int main ( int argc, char ** argv ) { int64_t start; pthread_t t1; pthread_t t2; pthread_mutex_init(&LOCK, NULL); pthread_mutex_init(&START, NULL); pthread_cond_init(&CONDITION, NULL); pthread_mutex_lock(&START); COUNTER = 0; pthread_create(&t1, NULL, threads, NULL); pthread_create(&t2, NULL, threads, NULL); pthread_detach(t1); pthread_detach(t2); // Get start time and fire away start = timeInMS(); pthread_mutex_unlock(&START); // Wait for about a second sleep(1); // Stop both threads pthread_mutex_lock(&LOCK); // Find out how much time has really passed. sleep won't guarantee me that // I sleep exactly one second, I might sleep longer since even after being // woken up, it can take some time before I gain back CPU time. Further // some more time might have passed before I obtained the lock! int64_t time = timeInMS() - start; // Correct the number of thread switches accordingly COUNTER = (uint32_t)(((uint64_t)COUNTER * 2 * 1000) / time); printf("Number of thread switches in about one second was %u\n", COUNTER); printf("roughly %f microseconds per switch\n", 1000000.0 / COUNTER); return 0; }

    Read the article

  • Incorrect string encodings

    - by James
    Note: I have read all of the related PHP, UTF-8, character encoding articles that are usually suggested, but my question relates to data inserted before I applied such techniques. I am wishing to retrospectively fix all character encoding problems. Now all connections are set as utf8 using PDO. PDO::MYSQL_ATTR_INIT_COMMAND => 'SET NAMES utf8' Unfortunately, a large amount of data was inserted that is of questionable encoding before I had implemented correct character encoding practices. As displayed by: $sql = "SELECT name FROM data LIMIT 3"; foreach ($pdo->query($sql) as $row) { $name = $row['name']; echo $name . "\n"; echo utf8_encode($name) . "\n"; echo utf8_decode($name) . "\n"; echo htmlspecialchars($name, ENT_QUOTES, 'UTF-8') . "\n"; echo htmlspecialchars(utf8_encode($name), ENT_QUOTES, 'UTF-8') . "\n"; echo htmlspecialchars(utf8_decode($name), ENT_QUOTES, 'UTF-8') . "\n"; echo '<hr/>'; } Which produces: Antonín Dvořák AntonÃÆín DvoÃâ¦Ãâ¢ÃÆák Anton??­n Dvo??????¡k Antonín Dvořák AntonÃÆín DvoÃâ¦Ãâ¢ÃÆák ---------- Ô±Ö€Õ¡Õ´ Ô½Õ¡Õ¹Õ¡Õ¿Ö€ÕµÕ¡Õ¶ ñÃâ¬Ã¡Ã´ ýáùáÿÃâ¬ÃµÃ¡Ã¶ ????? ?????????? Ô±Ö€Õ¡Õ´ Ô½Õ¡Õ¹Õ¡Õ¿Ö€ÕµÕ¡Õ¶ ñÃâ¬Ã¡Ã´ ýáùáÿÃâ¬ÃµÃ¡Ã¶ ---------- Tiësto Tiësto Tiësto Tiësto Tiësto Tiësto ---------- When removing 'SET NAMES utf8' with PDO it produces the data: Antonín DvoÅák Antonín DvoÃÂák Antonín Dvorák Antonín DvoÅák Antonín DvoÃÂák Antonín Dvorák ---------- ???? ????????? Ô±ÖÕ¡Õ´ Ô½Õ¡Õ¹Õ¡Õ¿ÖÕµÕ¡Õ¶ ???? ????????? ???? ????????? Ô±ÖÕ¡Õ´ Ô½Õ¡Õ¹Õ¡Õ¿ÖÕµÕ¡Õ¶ ???? ????????? ---------- Tiësto Tiësto Ti?sto Tiësto Tiësto ---------- And here is a dump of the database rows concerned: DROP TABLE IF EXISTS `data`; CREATE TABLE IF NOT EXISTS `data` ( `id` int(10) unsigned NOT NULL AUTO_INCREMENT, `name` varchar(80) NOT NULL, PRIMARY KEY (`id`), KEY `name` (`name`(10)), ) ENGINE=InnoDB DEFAULT CHARSET=utf8 AUTO_INCREMENT=0; INSERT INTO `data` (`id`, `name`) VALUES (0, 'Antonín Dvořák'), (1, 'Ô±Ö€Õ¡Õ´ Ô½Õ¡Õ¹Õ¡Õ¿Ö€ÕµÕ¡Õ¶'), (2, 'Tiësto'); The 3rd and 6th lines of the 3rd row "Tiësto" are then correctly echoed. I'm just unsure what is the best way to correct encodings/detect the encodings of bad strings and correct, etc.

    Read the article

  • How to convert m4a file to aac adts file in Xcode?

    - by Bird Hsuie
    I have a mp4 file copied from iPod lib and saved to my Document for my next step, I need it to convert to .mp3 or .aac(ADTS type) I use this code and failed... -(IBAction)compressFile:(id)sender{ NSLog (@"handleConvertToPCMTapped"); // open an ExtAudioFile NSLog (@"opening %@", exportURL); ExtAudioFileRef inputFile; CheckResult (ExtAudioFileOpenURL((__bridge CFURLRef)exportURL, &inputFile), "ExtAudioFileOpenURL failed"); // prepare to convert to a plain ol' PCM format AudioStreamBasicDescription myPCMFormat; myPCMFormat.mSampleRate = 44100; // todo: or use source rate? myPCMFormat.mFormatID = kAudioFormatMPEGLayer3 ; myPCMFormat.mFormatFlags = kAudioFormatFlagsCanonical; myPCMFormat.mChannelsPerFrame = 2; myPCMFormat.mFramesPerPacket = 1; myPCMFormat.mBitsPerChannel = 16; myPCMFormat.mBytesPerPacket = 4; myPCMFormat.mBytesPerFrame = 4; CheckResult (ExtAudioFileSetProperty(inputFile, kExtAudioFileProperty_ClientDataFormat, sizeof (myPCMFormat), &myPCMFormat), "ExtAudioFileSetProperty failed"); // allocate a big buffer. size can be arbitrary for ExtAudioFile. // you have 64 KB to spare, right? UInt32 outputBufferSize = 0x10000; void* ioBuf = malloc (outputBufferSize); UInt32 sizePerPacket = myPCMFormat.mBytesPerPacket; UInt32 packetsPerBuffer = outputBufferSize / sizePerPacket; // set up output file NSString *outputPath = [myDocumentsDirectory() stringByAppendingPathComponent:@"m_export.mp3"]; NSURL *outputURL = [NSURL fileURLWithPath:outputPath]; NSLog (@"creating output file %@", outputURL); AudioFileID outputFile; CheckResult(AudioFileCreateWithURL((__bridge CFURLRef)outputURL, kAudioFileCAFType, &myPCMFormat, kAudioFileFlags_EraseFile, &outputFile), "AudioFileCreateWithURL failed"); // start convertin' UInt32 outputFilePacketPosition = 0; //in bytes while (true) { // wrap the destination buffer in an AudioBufferList AudioBufferList convertedData; convertedData.mNumberBuffers = 1; convertedData.mBuffers[0].mNumberChannels = myPCMFormat.mChannelsPerFrame; convertedData.mBuffers[0].mDataByteSize = outputBufferSize; convertedData.mBuffers[0].mData = ioBuf; UInt32 frameCount = packetsPerBuffer; // read from the extaudiofile CheckResult (ExtAudioFileRead(inputFile, &frameCount, &convertedData), "Couldn't read from input file"); if (frameCount == 0) { printf ("done reading from file"); break; } // write the converted data to the output file CheckResult (AudioFileWritePackets(outputFile, false, frameCount, NULL, outputFilePacketPosition / myPCMFormat.mBytesPerPacket, &frameCount, convertedData.mBuffers[0].mData), "Couldn't write packets to file"); NSLog (@"Converted %ld bytes", outputFilePacketPosition); // advance the output file write location outputFilePacketPosition += (frameCount * myPCMFormat.mBytesPerPacket); } // clean up ExtAudioFileDispose(inputFile); AudioFileClose(outputFile); // show size in label NSLog (@"checking file at %@", outputPath); [self transMitFile:outputPath]; if ([[NSFileManager defaultManager] fileExistsAtPath:outputPath]) { NSError *fileManagerError = nil; unsigned long long fileSize = [[[NSFileManager defaultManager] attributesOfItemAtPath:outputPath error:&fileManagerError] fileSize]; } any suggestion?.......thanks for your great help!

    Read the article

  • Download a file using cocoa

    - by dododedodonl
    Hi All, I want to download a file to the downloads folder. I searched google for this and found the NSURLDownload class. I've read the page in the dev center and created this code (with some copy and pasting) this code: @implementation Downloader @synthesize downloadResponse; - (void)startDownloadingURL:(NSString*)downloadUrl destenation:(NSString*)destenation { // create the request NSURLRequest *theRequest=[NSURLRequest requestWithURL:[NSURL URLWithString:downloadUrl] cachePolicy:NSURLRequestUseProtocolCachePolicy timeoutInterval:60.0]; // create the connection with the request // and start loading the data NSURLDownload *theDownload=[[NSURLDownload alloc] initWithRequest:theRequest delegate:self]; if (!theDownload) { NSLog(@"Download could not be made..."); } } - (void)download:(NSURLDownload *)download decideDestinationWithSuggestedFilename:(NSString *)filename { NSString *destinationFilename; NSString *homeDirectory=NSHomeDirectory(); destinationFilename=[[homeDirectory stringByAppendingPathComponent:@"Desktop"] stringByAppendingPathComponent:filename]; [download setDestination:destinationFilename allowOverwrite:NO]; } - (void)download:(NSURLDownload *)download didFailWithError:(NSError *)error { // release the connection [download release]; // inform the user NSLog(@"Download failed! Error - %@ %@", [error localizedDescription], [[error userInfo] objectForKey:NSErrorFailingURLStringKey]); } - (void)downloadDidFinish:(NSURLDownload *)download { // release the connection [download release]; // do something with the data NSLog(@"downloadDidFinish"); } - (void)setDownloadResponse:(NSURLResponse *)aDownloadResponse { [aDownloadResponse retain]; [downloadResponse release]; downloadResponse = aDownloadResponse; } - (void)download:(NSURLDownload *)download didReceiveResponse:(NSURLResponse *)response { // reset the progress, this might be called multiple times bytesReceived = 0; // retain the response to use later [self setDownloadResponse:response]; } - (void)download:(NSURLDownload *)download didReceiveDataOfLength:(unsigned)length { long long expectedLength = [[self downloadResponse] expectedContentLength]; bytesReceived = bytesReceived+length; if (expectedLength != NSURLResponseUnknownLength) { percentComplete = (bytesReceived/(float)expectedLength)*100.0; NSLog(@"Percent - %f",percentComplete); } else { NSLog(@"Bytes received - %d",bytesReceived); } } -(NSURLRequest *)download:(NSURLDownload *)download willSendRequest:(NSURLRequest *)request redirectResponse:(NSURLResponse *)redirectResponse { NSURLRequest *newRequest=request; if (redirectResponse) { newRequest=nil; } return newRequest; } @end But my problem is now, it doesn't appear on the desktop as specified. And I want to put it in downloads and not on the desktop... What do I have to do?

    Read the article

  • vc++ - static member is showing error

    - by prabhakaran
    I am using vc++(2010). I am trying to create a class for server side socket. Here is the header file #include<winsock.h> #include<string> #include<iostream> using namespace std; class AcceptSocket { // static SOCKET s; protected: SOCKET acceptSocket; public: AcceptSocket(){}; void setSocket(SOCKET socket); static void EstablishConnection(int portNo,string&); static void closeConnection(); static void StartAccepting(); virtual void threadDeal(); static DWORD WINAPI MyThreadFunction(LPVOID lpParam); }; SOCKET AcceptSocket::s; and the corresponding source file #include<NetWorking.h> #include<string> void AcceptSocket::setSocket(SOCKET s) { acceptSocket=s; } void AcceptSocket::EstablishConnection(int portno,string &failure) { WSAData w; int error = WSAStartup(0x0202,&w); if(error) failure=failure+"\nWSAStartupFailure"; if(w.wVersion != 0x0202) { WSACleanup(); failure=failure+"\nVersion is different"; } SOCKADDR_IN addr; addr.sin_family=AF_INET; addr.sin_port=htons(portno); addr.sin_addr.s_addr=htonl(INADDR_ANY); AcceptSocket::s=socket(AF_INET,SOCK_STREAM,IPPROTO_TCP); if(AcceptSocket::s == INVALID_SOCKET) failure=failure+"\nsocket creating error"; if(bind(AcceptSocket::s,(LPSOCKADDR) &addr,sizeof(addr)) == SOCKET_ERROR) failure=failure+"\nbinding error"; listen(AcceptSocket::s,SOMAXCONN); } void AcceptSocket::closeConnection() { if(AcceptSocket::s) closesocket(AcceptSocket::s); WSACleanup(); } void AcceptSocket::StartAccepting() { sockaddr_in addrNew; int size=sizeof(addrNew); while(1) { SOCKET temp=accept(AcceptSocket::s,(sockaddr *)&addrNew,&size); AcceptSocket * tempAcceptSocket=new AcceptSocket(); tempAcceptSocket->setSocket(temp); DWORD threadId; HANDLE thread=CreateThread(NULL,0,MyThreadFunction,(LPVOID)tempAcceptSocket,0,&threadId); } } DWORD WINAPI AcceptSocket::MyThreadFunction(LPVOID lpParam) { AcceptSocket * acceptsocket=(AcceptSocket *) lpParam; acceptsocket->threadDeal(); return 1; } void AcceptSocket::threadDeal() { "You didn't define threadDeal in the derived class"; } Now the main.cpp is #include<Networking.h> int main() { } When I am compiling The error I got is Error 1 error LNK2005: "private: static unsigned int AcceptSocket::s" (?s@AcceptSocket@@0IA) already defined in NetWorking.obj C:\Documents and Settings\prabhakaran\Desktop\check\check\main.obj check Error 2 error LNK1169: one or more multiply defined symbols found C:\Documents and Settings\prabhakaran\Desktop\check\Debug\check.exe 1 1 check Now anybody please enlighten me about this issue

    Read the article

  • How to fix OpenGL/SDL runtime error which is probobly caused by adding textures [closed]

    - by Arturs Lapins
    Hello I've recently worked with OpenGL and SDL and I was adding textures to my GL_QUADS and when I ran my program I came across with a runtime error. I've searched all over the internet for a fix but I couldn't find anything so I guess I had one more option. Asking here. So here is some of my code. int loadTexture(std::string fileName){ SDL_Surface *image=IMG_Load(fileName.c_str()); SDL_DisplayFormatAlpha(image); unsigned int id; glGenTextures(1,&id); glBindTexture(GL_TEXTURE_2D,&id); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_NEAREST); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_NEAREST); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_WRAP_S,GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D,GL_TEXTURE_WRAP_T,GL_CLAMP_TO_EDGE); glTexImage2D(GL_TEXTURE_2D,0,GL_RGBA,image->w,image >h,0,GL_RGBA,GL_UNSIGNED_BYTE,image->pixels); SDL_FreeSurface(image); return id; } That's my loadTexture function. void init() { glClearColor(0.0, 0.0, 0.0, 1.0); glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.0, 800.0 / 600.0, 1.0, 500.0); glMatrixMode(GL_MODELVIEW); glEnable(GL_DEPTH_TEST); glEnable(GL_TEXTURE_2D); tex=loadTexture("test.png"); } That's my init function for OpenGL. Btw I have declared my tex variable. void render() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); glTranslatef(0.0, 0.0, -10.0); glRotatef(rotation, 1.0, 1.0, 1.0); glBindTexture(GL_TEXTURE_2D, tex); glBegin(GL_QUADS); glTexCoord2f(1.0, 0.0); glVertex3f(-2.0, 2.0, 0.0); glTexCoord2f(1.0, 1.0); glVertex3f(2.0, 2.0, 0.0); glTexCoord2f(1.0, 0.0); glVertex3f(2.0, -2.0, 0.0); glTexCoord2f(0.0, 0.0); glVertex3f(-2.0, -2.0, 0.0); glEnd(); } That's my render function for all my OpenGL render stuff... The render function is called in the main function which contains a game loop. Here is the runtime error when I run it with Visual C++ Unhandled exception at 0x004ffee9 in OpenGL Crap.exe: 0xC0000005: Access violation reading location 0x05c90000. So I have only had this error when I added textures... ... So I found where the error occured it was at this line glTexImage2D(GL_TEXTURE_2D,0,GL_RGBA,image->w,image->h,0,GL_RGBA,GL_UNSIGNED_BYTE,image->pixels); but I have totally no Idea what could it be. Update Only thanks to zero298

    Read the article

  • Vector iterators in for loops, return statements, warning, c++

    - by Crystal
    Had 3 questions regarding a hw assignment for C++. The goal was to create a simple palindrome method. Here is my template for that: #ifndef PALINDROME_H #define PALINDROME_H #include <vector> #include <iostream> #include <cmath> template <class T> static bool palindrome(const std::vector<T> &input) { std::vector<T>::const_iterator it = input.begin(); std::vector<T>::const_reverse_iterator rit = input.rbegin(); for (int i = 0; i < input.size()/2; i++, it++, rit++) { if (!(*it == *rit)) { return false; } } return true; } template <class T> static void showVector(const std::vector<T> &input) { for (std::vector<T>::const_iterator it = input.begin(); it != input.end(); it++) { std::cout << *it << " "; } } #endif Regarding the above code, can you have more than one iterator declared in the first part of the for loop? I tried defining both the "it" and "rit" in the palindrome() method, and I kept on getting an error about needing a "," before rit. But when I cut and paste outside the for loop, no errors from the compiler. (I'm using VS 2008). Second question, I pretty much just brain farted on this one. But is the way I have my return statements in the palindrome() method ok? In my head, I think it works like, once the *it and *rit do not equal each other, then the function returns false, and the method exits at this point. Otherwise if it goes all the way through the for loop, then it returns true at the end. I totally brain farted on how return statements work in if blocks and I tried looking up a good example in my book and I couldn't find one. Finally, I get this warnings: \palindrome.h(14) : warning C4018: '<' : signed/unsigned mismatch Now is that because I run my for loop until (i < input.size()/2) and the compiler is telling me that input can be negative? Thanks!

    Read the article

  • Special parameters for texture binding?

    - by user146780
    Do I have to set up my gl context in a certain way to bind textures. I'm following a tutorial. I start by doing: #define checkImageWidth 64 #define checkImageHeight 64 static GLubyte checkImage[checkImageHeight][checkImageWidth][4]; static GLuint texName; void makeCheckImage(void) { int i, j, c; for (i = 0; i < checkImageHeight; i++) { for (j = 0; j < checkImageWidth; j++) { c = ((((i&0x8)==0)^((j&0x8))==0))*255; checkImage[i][j][0] = (GLubyte) c; checkImage[i][j][1] = (GLubyte) c; checkImage[i][j][2] = (GLubyte) c; checkImage[i][j][3] = (GLubyte) 255; } } } void initt(void) { glClearColor (0.0, 0.0, 0.0, 0.0); makeCheckImage(); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); glGenTextures(1, &texName); glBindTexture(GL_TEXTURE_2D, texName); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, checkImageWidth, checkImageHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, checkImage); engineGL.current.tex = texName; } In my rendering I do: PolygonTesselator.Begin_Contour(); glEnable(GL_TEXTURE_2D); glTexEnvf(GL_TEXTURE_ENV, GL_TEXTURE_ENV_MODE, GL_DECAL); glBindTexture(GL_TEXTURE_2D, current.tex); if(layer[currentlayer].Shapes[i].Contour[c].DrawingPoints.size() > 0) { glColor4f( layer[currentlayer].Shapes[i].Color.r, layer[currentlayer].Shapes[i].Color.g, layer[currentlayer].Shapes[i].Color.b, layer[currentlayer].Shapes[i].Color.a); } for(unsigned int j = 0; j < layer[currentlayer].Shapes[i].Contour[c].DrawingPoints.size(); ++j) { gluTessVertex(PolygonTesselator.tobj,&layer[currentlayer].Shapes[i].Contour[c].DrawingPoints[j][0], &layer[currentlayer].Shapes[i].Contour[c].DrawingPoints[j][0]); } PolygonTesselator.End_Contour(); } glDisable(GL_TEXTURE_2D); } However it still renders the color and not the texture at all. I'd atleast expect to see black or something but its as if the bind fails. Am I missing something? Thanks

    Read the article

  • What is wrong with this attempt of sending a break-signal?

    - by Jook
    I have quite a headache about this seemingly easy task: send a break signal to my device, like the wxTerm (or any similar Terminal application) does. This signal has to be 125ms long, according to my tests and the devices specification. It should result in a specific response, but what I get is a longer response than expected, and the transmitted date is false. e.g.: what it should respond 08 00 81 00 00 01 07 00 what it does respond 08 01 0A 0C 10 40 40 07 00 7F What really boggles me is, that after I have used wxTerm to look at my available com-ports (without connecting or sending anything), my code starts to work! I can send then as many breaks as I like, I get my response right from then on. I have to reset my PC in order to try it again. What the heck is going on here?! Here is my code for a reset through a break-signal: minicom_client(boost::asio::io_service& io_service, unsigned int baud, const string& device) : active_(true), io_service_(io_service), serialPort(io_service, device) { if (!serialPort.is_open()) { cerr << "Failed to open serial port\n"; return; } boost::asio::serial_port_base::flow_control FLOW( boost::asio::serial_port_base::flow_control::hardware ); boost::asio::serial_port_base::baud_rate baud_option(baud); serialPort.set_option(FLOW); serialPort.set_option(baud_option); read_start(); std::cout << SetCommBreak(serialPort.native_handle()) << std::endl; std::cout << GetLastError() << std::endl; boost::posix_time::ptime mst1 = boost::posix_time::microsec_clock::local_time(); boost::this_thread::sleep(boost::posix_time::millisec(125)); boost::posix_time::ptime mst2 = boost::posix_time::microsec_clock::local_time(); std::cout << ClearCommBreak(serialPort.native_handle()) << std::endl; std::cout << GetLastError() << std::endl; boost::posix_time::time_duration msdiff = mst2 - mst1; std::cout << msdiff.total_milliseconds() << std::endl; } Edit: It was only necessary to look at the combo-box selection of com-ports of wxTerm - no active connection was needed to be established in order to make my code work. I am guessing, that there is some sort of initialisation missing, which is done, when wxTerm is creating the list for the serial-port combo-box.

    Read the article

  • Lithium: Run filter after find() to format output

    - by Housni
    I wanted to specify the output of a field from within my model so I added a date key to my $_schema: models/Tags.php <?php protected $_schema = array( 'id' => array('type' => 'integer', 'key' => 'primary'), 'title' => array('type' => 'string'), 'created' => array('type' => 'integer', 'date' => 'F jS, Y - g:i a'), 'modified' => array('type' => 'integer') ); ?> I store my time as an unsigned integer in the db (output of time()). I want my base model to format any field that has the date key for output. I thought the best place to do that would be right after a find: extensions/data/Model.php <?php static::applyFilter('find', function($self, $params, $chain) { $schema = $self::schema(); $entity = $chain->next($self, $params, $chain); foreach ($schema as $field => $options) { if (array_key_exists('date', $options)) { //format as a date $params['data'][$field] = $entity->formatDate($field, $options['date']); } } return $entity; }); public function formatdate($entity, $field, $format, $timezone = 'Asia/Colombo') { $dt = new \DateTime(); $tz = new \DateTimeZone($timezone); $dt->setTimestamp($entity->$field); $dt->setTimezone($tz); return $dt->format($format); } ?> This doesn't seem to be working. When I execute a find all, this filter seems to get hit twice. The first time, $entity contains a count() of the results and only on the second hit does it contain the Records object. What am I doing wrong? How do I alter this so that simply doing <?= $tag->created; ?> in my view will format the date the way I want? This, essentially, needs to be an 'after filter', of sorts. EDIT If I can find a way to access the current model entity object (not the full namespaced path, $self contains that), I can probably solve my problem.

    Read the article

  • Converting a C++ Checksum function to Java

    - by user1897599
    I'm trying to convert this C++ checksum to Java but for the time being I've failed. What am I doing wrong? What is it supposed to do? It is supposed to return a positive checksum for a buffer in OpenGL Here's the C part. DWORD QuickChecksum(DWORD *data, int size){ if(!data) { return 0x0; } DWORD sum; DWORD tmp; sum = *data; for(int i = 1; i < (size/4); i++) { tmp = data[i]; tmp = (DWORD)(sum >> 29) + tmp; tmp = (DWORD)(sum >> 17) + tmp; sum = (DWORD)(sum << 3) ^ tmp; } return sum; } And here is what I have tried in Java. As far As I know DWORD is 32bit so I use int in a long to get a unsigned int which should be done in java with ? I've been looking at this problem so much now that I've grown blind to it. public static long getChecksum(byte[] data, int size) { long sum, tmp; sum = getInt(new byte[]{data[0], data[1], data[2], data[3]},true) & 0xFF; for(int I = 4; I < data.length; I += 4) { tmp = getInt(new byte[]{data[I],data[I+1],data[I+2],data[I+3]},true) & 0xFF; tmp = (sum >>> 29) + tmp; tmp = (sum >>> 17) + tmp; sum = (sum << 3) ^ tmp; } return sum & 0xFF; } private static int getInt(byte[] bytes, boolean big) { ByteBuffer bb = ByteBuffer.wrap(bytes); return bb.getInt(); } Thank you all for your help!

    Read the article

  • Wake up thread blocked on accept() call

    - by selbie
    Sockets on Linux question I have a worker thread that is blocked on an accept() call. It simply waits for an incoming network connection, handles it, and then returns to listening for the next connection. When it is time for the program to exit, how do I signal this network worker thread (from the main thread) to return from the accept() call while still being able to gracefully exit its loop and handle it's cleanup code. Some things I tried: 1. pthread_kill to send a signal. Feels kludgy to do this, plus it doesn't reliably allow the thread to do it's shutdown logic. Also makes the program terminate as well. I'd like to avoid signals if at all possible. pthread_cancel. Same as above. It's a harsh kill on the thread. That, and the thread may be doing something else. Closing the listen socket from the main thread in order to make accept() abort. This doesn't reliably work. Some constraints: If the solution involves making the listen socket non-blocking, that is fine. But I don't want to accept a solution that involves the thread waking up via a select call every few seconds to check the exit condition. The thread condition to exit may not be tied to the process exiting. Essentially, the logic I am going for looks like this. void* WorkerThread(void* args) { DoSomeImportantInitialization(); // initialize listen socket and some thread specific stuff while (HasExitConditionBeenSet()==false) { listensize = sizeof(listenaddr); int sock = accept(listensocket, &listenaddr, &listensize); // check if exit condition has been set using thread safe semantics if (HasExitConditionBeenSet()) { break; } if (sock < 0) { printf("accept returned %d (errno==%d)\n", sock, errno); } else { HandleNewNetworkCondition(sock, &listenaddr); } } DoSomeImportantCleanup(); // close listen socket, close connections, cleanup etc.. return NULL; } void SignalHandler(int sig) { printf("Caught CTRL-C\n"); } void NotifyWorkerThreadToExit(pthread_t thread_handle) { // signal thread to exit } int main() { void* ptr_ret= NULL; pthread_t workerthread_handle = 0; pthread_create(&workerthread, NULL, WorkerThread, NULL); signal(SIGINT, SignalHandler); sleep((unsigned int)-1); // sleep until the user hits ctrl-c printf("Returned from sleep call...\n"); SetThreadExitCondition(); // sets global variable with barrier that worker thread checks on // this is the function I'm stalled on writing NotifyWorkerThreadToExit(workerthread_handle); // wait for thread to exit cleanly pthread_join(workerthread_handle, &ptr_ret); DoProcessCleanupStuff(); }

    Read the article

  • Vector Troubles in C++

    - by DistortedLojik
    I am currently working on a project that deals with a vector of objects of a People class. The program compiles and runs just fine, but when I use the debugger it dies when trying to do anything with the PersonWrangler object. I currently have 3 different classes, one for the person, a personwrangler which handles all of the people collectively, and a game class that handles the game input and output. Edit: My basic question is to understand why it is dying when it calls outputPeople. Also I would like to understand why my program works exactly as it should unless I use the debugger. The outputPeople function works the way I intended that way. Edit 2: The callstack has 3 bad calls which are: std::vector ::begin(this=0xbaadf00d) std::vector ::size(this=0xbaadf00d) PersonWrangler::outputPeople(this=0xbaadf00d) Relevant code: class Game { public: Game(); void gameLoop(); void menu(); void setStatus(bool inputStatus); bool getStatus(); PersonWrangler* hal; private: bool status; }; which calls outputPeople where it promptly dies from a baadf00d error. void Game::menu() { hal->outputPeople(); } where hal is an object of PersonWrangler type class PersonWrangler { public: PersonWrangler(int inputStartingNum); void outputPeople(); vector<Person*> peopleVector; vector<Person*>::iterator personIterator; int totalPeople; }; and the outputPeople function is defined as void PersonWrangler::outputPeople() { int totalConnections = 0; cout << " Total People:" << peopleVector.size() << endl; for (unsigned int i = 0;i < peopleVector.size();i++) { sort(peopleVector[i]->connectionsVector.begin(),peopleVector[i]->connectionsVector.end()); peopleVector[i]->connectionsVector.erase( unique (peopleVector[i]->connectionsVector.begin(),peopleVector[i]->connectionsVector.end()),peopleVector[i]->connectionsVector.end()); peopleVector[i]->outputPerson(); totalConnections+=peopleVector[i]->connectionsVector.size(); } cout << "Total connections:" << totalConnections/2 << endl; }

    Read the article

  • template; operator (int)

    - by Oops
    Hi, regarding my Point struct already mentioned here: http://stackoverflow.com/questions/2794369/template-class-ctor-against-function-new-c-standard is there a chance to replace the function toint() with a cast-operator (int)? namespace point { template < unsigned int dims, typename T > struct Point { T X[ dims ]; //umm??? template < typename U > Point< dims, U > operator U() const { Point< dims, U > ret; std::copy( X, X + dims, ret.X ); return ret; } //umm??? Point< dims, int > operator int() const { Point<dims, int> ret; std::copy( X, X + dims, ret.X ); return ret; } //OK Point<dims, int> toint() { Point<dims, int> ret; std::copy( X, X + dims, ret.X ); return ret; } }; //struct Point template < typename T > Point< 2, T > Create( T X0, T X1 ) { Point< 2, T > ret; ret.X[ 0 ] = X0; ret.X[ 1 ] = X1; return ret; } }; //namespace point int main(void) { using namespace point; Point< 2, double > p2d = point::Create( 12.3, 34.5 ); Point< 2, int > p2i = (int)p2d; //äähhm??? std::cout << p2d.str() << std::endl; char c; std::cin >> c; return 0; } I think the problem is here that C++ cannot distinguish between different return types? many thanks in advance. regards Oops

    Read the article

  • Code to generate random numbers in C++

    - by user1678927
    Basically I have to write a program to generate random numbers to simulate the rolling of a pair of dice. This program should be constructed in multiple files. The main function should be in one file, the other functions should be in a second source file, and their prototypes should be in a header file. First I write a short function that returns a random value between 1 and 6 to simulate the rolling of a single 6-sided die.Second, i write a function that pretends to roll a pair of dice by calling this function twice. My program starts by asking the user how many rolls should be made. Then I write a function to simulate rolling the dice this many times, keeping a count of exactly how many times the values 2,3,4,5,6,7,8,9,10,11,12(each number is the sum of a pair of dice) occur in an array. Later I write a function to display a small bar chart using these counts that ideally would look something like below for a sample of 144 rolls, where the number of asterisks printed corresponds to the count: 2 3 4 5 6 7 8 9 10 11 12 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Next, to see how well the random number generator is doing, I write a function to compute the average value rolled. Compare this to the ideal average of 7. Also, print out a small table showing the counts of each roll made by the program, the ideal count based on the frequencies above given the total number of rolls, and the difference between these values in separate columns. This is my incomplete code so far: "Compiler visual studio 2010" int rolling(){ //Function that returns a random value between 1 and 6 rand(unsigned(time(NULL))); int dice = 1 + (rand() %6); return dice; } int roll_dice(int num1,int num2){ //it calls 'rolling function' twice int result1,result2; num1 = rolling(); num2 = rolling(); result1 = num1; result2 = num2; return result1,result2; } int main(void){ int times,i,sum,n1,n2; int c1,c2,c3,c4,c5,c6,c7,c8,c9,c10,c11;//counters for each sum printf("Please enter how many times you want to roll the dice.\n") scanf_s("%i",&times); I pretend to use counters to count each sum and store the number(the count) in an array. I know i need a loop (for) and some conditional statements (if) but m main problem is to get the values from roll_dice and store them in n1 and n2 so then i can sum them up and store the sum in 'sum'.

    Read the article

  • Issue when rotating a UIScrollView

    - by leachianus.gecko
    I am having issues trying to get the pageControl sample code to work with rotation. I managed to get it to rotate but it does not visually load correctly until I start to scroll (then it works fine). Any Idea on how I can fix this problem? Here is a link to the project if you want to see it in action. This code is based off the PageControl example apple has provided. here is the code: #import "ScrollingViewController.h" #import "MyViewController.h" @interface ScrollingViewController (PrivateMethods) - (void)loadScrollViewWithPage:(int)page; @end @implementation ScrollingViewController @synthesize scrollView; @synthesize viewControllers; - (void)viewDidLoad { amount = 5; [super viewDidLoad]; [self setupPage]; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; } - (void)viewDidUnload { [scrollView release]; } - (void)dealloc { [super dealloc]; } - (void)setupPage { NSMutableArray *controllers = [[NSMutableArray alloc] init]; for (unsigned i = 0; i < amount; i++) { [controllers addObject:[NSNull null]]; } self.viewControllers = controllers; [controllers release]; // a page is the width of the scroll view scrollView.pagingEnabled = YES; scrollView.contentSize = CGSizeMake(scrollView.frame.size.width * amount, 200); scrollView.showsHorizontalScrollIndicator = NO; scrollView.showsVerticalScrollIndicator = NO; scrollView.scrollsToTop = NO; scrollView.delegate = self; [self loadScrollViewWithPage:0]; [self loadScrollViewWithPage:1]; } #pragma mark - #pragma mark UIScrollViewDelegate stuff - (void)scrollViewDidScroll:(UIScrollView *)_scrollView { if (pageControlIsChangingPage) { return; } /* * We switch page at 50% across */ CGFloat pageWidth = _scrollView.frame.size.width; int dog = floor((_scrollView.contentOffset.x - pageWidth / 2) / pageWidth) + 1; // pageControl.currentPage = page; [self loadScrollViewWithPage:dog - 1]; [self loadScrollViewWithPage:dog]; [self loadScrollViewWithPage:dog + 1]; } - (void)loadScrollViewWithPage:(int)page { if (page < 0) return; if (page >= amount) return; MyViewController *controller = [viewControllers objectAtIndex:page]; if ((NSNull *)controller == [NSNull null]) { controller = [[MyViewController alloc] initWithPageNumber:page]; [viewControllers replaceObjectAtIndex:page withObject:controller]; [controller release]; } if (nil == controller.view.superview) { CGRect frame = scrollView.frame; frame.origin.x = frame.size.width * page; frame.origin.y = 0; controller.view.frame = frame; [scrollView addSubview:controller.view]; } } - (void)didRotateFromInterfaceOrientation:(UIInterfaceOrientation)fromInterfaceOrientation { [self setupPage]; } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return YES; } @end

    Read the article

  • SWFObject and IE6 causing hair-pulling agony

    - by Piet
    I recently used SWFObject to display a flash header on a website. I chose SWFObject because: Instead of displaying an annoying ‘Install flash now’ message, it claims to be able to show alternate content. In this case: the original header image. It claims to be compatible with more or less every browser out there. Implementation went fine, until someone tested it on IE6 and got the following error: Internet explorer cannot open the Internet site http://www….. Operation aborted Which basically means that the site just can’t be visited with IE6 (still used a lot in business environments), it even seems as if there’s something wrong with your internet connection. Now, since about 10% of visitors to this site are still using IE6 (why does everyone still use Internet Explorer ???? Do YOU know that these days most people do NOT use Internet Explorer anymore ?) Now after some googling, I found the suggestion to defer loading of the SWFObject.js as follows: <script type="text/javascript" defer=”defer” src=”http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js” </script> <script type=”text/javascript” defer=”defer” swfobject.registerObject(”myId”, “9″, “”); </script> What this does according to W3C: When set, this boolean attribute provides a hint to the user agent that the script is not going to generate any document content (e.g., no “document.write” in javascript) and thus, the user agent can continue parsing and rendering. I don’t know exactly why, but: HURRAY! It works now!!! Only… IE6 and IE7 (didn’t try IE8) now gave the following error: Line: 19 Char: 1 Error: ’swfobject’ is undefined Code: 0 URL: http://www… But the flash was still running fine. Still, such an error isn’t clean, especially since almost half of the site’s visitors are using one of these Internet Explorer versions. Now, wanting a quick fix I decided to do the following: <script type="text/javascript" defer="defer" if (typeof(swfobject) != "undefined") swfobject.registerObject("myId", "9", ""); </script> I admit this is a bit of a weird ‘fix’. You’d suspect the flash to stop working on IE6/IE7, which it doesn’t. Not planning on diving into it’s inner bowels, I regard this a ‘mission accomplished’ until someone somewhere posts a better solution (for which I setup some Google alerts). Do you have a better solution? What would be the impact on the webdev economy (or your life) if all browsers were compatible? Addendum Because the above turned out not to work with the new Firefox 3.5.3 (strangely, was OK with 3.5.2 when I tested it) I decided to cut the crap and use the ‘Dynamic Publishing’ way. Ok, so it won’t work for people who have javascript disabled, but who on earth would have flash installed AND javascript disabled? To avoid the IE6 error with the ‘Dynamic Publishing’ way, I call swfobject.embedSWF right after the div that will be replaced with the flash content. Calling swfobject.embedSWF in the <head> would otherwise give me the above error in IE6 again.

    Read the article

  • Migrating SQL Server Databases – The DBA’s Checklist (Part 3)

    - by Sadequl Hussain
    Continuing from Part 2 of the Database Migration Checklist series: Step 10: Full-text catalogs and full-text indexing This is one area of SQL Server where people do not seem to take notice unless something goes wrong. Full-text functionality is a specialised area in database application development and is not usually implemented in your everyday OLTP systems. Nevertheless, if you are migrating a database that uses full-text indexing on one or more tables, you need to be aware a few points. First of all, SQL Server 2005 now allows full-text catalog files to be restored or attached along with the rest of the database. However, after migration, if you are unable to look at the properties of any full-text catalogs, you are probably better off dropping and recreating it. You may also get the following error messages along the way: Msg 9954, Level 16, State 2, Line 1 The Full-Text Service (msftesql) is disabled. The system administrator must enable this service. This basically means full text service is not running (disabled or stopped) in the destination instance. You will need to start it from the Configuration Manager. Similarly, if you get the following message, you will also need to drop and recreate the catalog and populate it. Msg 7624, Level 16, State 1, Line 1 Full-text catalog ‘catalog_name‘ is in an unusable state. Drop and re-create this full-text catalog. A full population of full-text indexes can be a time and resource intensive operation. Obviously you will want to schedule it for low usage hours if the database is restored in an existing production server. Also, bear in mind that any scheduled job that existed in the source server for populating the full text catalog (e.g. nightly process for incremental update) will need to be re-created in the destination. Step 11: Database collation considerations Another sticky area to consider during a migration is the collation setting. Ideally you would want to restore or attach the database in a SQL Server instance with the same collation. Although not used commonly, SQL Server allows you to change a database’s collation by using the ALTER DATABASE command: ALTER DATABASE database_name COLLATE collation_name You should not be using this command for no reason as it can get really dangerous.  When you change the database collation, it does not change the collation of the existing user table columns.  However the columns of every new table, every new UDT and subsequently created variables or parameters in code will use the new setting. The collation of every char, nchar, varchar, nvarchar, text or ntext field of the system tables will also be changed. Stored procedure and function parameters will be changed to the new collation and finally, every character-based system data type and user defined data types will also be affected. And the change may not be successful either if there are dependent objects involved. You may get one or multiple messages like the following: Cannot ALTER ‘object_name‘ because it is being referenced by object ‘dependent_object_name‘. That is why it is important to test and check for collation related issues. Collation also affects queries that use comparisons of character-based data.  If errors arise due to two sides of a comparison being in different collation orders, the COLLATE keyword can be used to cast one side to the same collation as the other. Continues…

    Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >